* [PATCH 0/2] arm64: dts: qcom: lemans-draco-evk: Wire up CYPD6129 USB Type-C ports
@ 2026-11-19 18:13 Akash Kumar
2026-11-19 18:13 ` [PATCH 1/2] arm64: dts: qcom: lemans: Add graph port placeholders for USB Type-C muxing Akash Kumar
2026-11-19 18:13 ` [PATCH 2/2] arm64: dts: qcom: lemans-draco-evk: Wire up CYPD6129 USB Type-C ports Akash Kumar
0 siblings, 2 replies; 3+ messages in thread
From: Akash Kumar @ 2026-11-19 18:13 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Dmitry Baryshkov, Krzysztof Kozlowski, Conor Dooley
Cc: linux-kernel, linux-arm-msm, devicetree
This series wires up the CYPD6129 UCSI PD controller on the LeMans
Draco EVK carrier board, enabling USB Type-C role switching and
SuperSpeed/HS muxing on both USB-C connectors.
Patch 1 adds the shared OF graph port placeholders and
usb-role-switch on usb_1 in lemans.dtsi, and drops the fixed
dr_mode = "host" override in the Draco SoM now that the port's mode
is determined by the role switch instead.
Patch 2 adds the CYPD6129 controller, reached through a PCA9546 I2C
mux on i2c11, and hooks up its two Type-C connectors to the usb_1
HS/SS endpoints introduced in patch 1.
Akash Kumar (2):
arm64: dts: qcom: lemans: Add graph port placeholders for USB Type-C
muxing
arm64: dts: qcom: lemans-draco-evk: Wire up CYPD6129 USB Type-C ports
arch/arm64/boot/dts/qcom/lemans-draco-evk.dts | 110 ++++++++++++++++++
.../arm64/boot/dts/qcom/lemans-draco-som.dtsi | 2 -
arch/arm64/boot/dts/qcom/lemans.dtsi | 20 ++++
3 files changed, 130 insertions(+), 2 deletions(-)
---
base-commit: 42c51622f624d32187e9a833178830718de18ade
change-id: 20261119-lemans-draco-cypd6129-v1
---
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH 1/2] arm64: dts: qcom: lemans: Add graph port placeholders for USB Type-C muxing
2026-11-19 18:13 [PATCH 0/2] arm64: dts: qcom: lemans-draco-evk: Wire up CYPD6129 USB Type-C ports Akash Kumar
@ 2026-11-19 18:13 ` Akash Kumar
2026-11-19 18:13 ` [PATCH 2/2] arm64: dts: qcom: lemans-draco-evk: Wire up CYPD6129 USB Type-C ports Akash Kumar
1 sibling, 0 replies; 3+ messages in thread
From: Akash Kumar @ 2026-11-19 18:13 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Dmitry Baryshkov, Krzysztof Kozlowski, Conor Dooley
Cc: linux-kernel, linux-arm-msm, devicetree
Add an OF graph "ports" node under usb_1 with HS and SS endpoint
placeholders, and enable usb-role-switch, so board files can hook up
a UCSI PD controller to drive Type-C role switching and SS/HS muxing.
Drop the fixed dr_mode = "host" override on usb_1 in the Draco SoM,
since the port's mode will now be determined by the role switch
instead of being pinned to host.
Signed-off-by: Akash Kumar <akash.kumar@oss.qualcomm.com>
---
.../arm64/boot/dts/qcom/lemans-draco-som.dtsi | 2 --
arch/arm64/boot/dts/qcom/lemans.dtsi | 20 +++++++++++++++++++
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/lemans-draco-som.dtsi b/arch/arm64/boot/dts/qcom/lemans-draco-som.dtsi
index 1001b6b81c31..6861cccabb2f 100644
--- a/arch/arm64/boot/dts/qcom/lemans-draco-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-draco-som.dtsi
@@ -384,8 +384,6 @@ &usb_0_qmpphy {
};
&usb_1 {
- dr_mode = "host";
-
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 20f329c0df75..0c24e5438935 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -3024,9 +3024,29 @@ usb_1: usb@a800000 {
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
+ usb-role-switch;
dma-coherent;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ };
+ };
+ };
};
usb_2: usb@a400000 {
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH 2/2] arm64: dts: qcom: lemans-draco-evk: Wire up CYPD6129 USB Type-C ports
2026-11-19 18:13 [PATCH 0/2] arm64: dts: qcom: lemans-draco-evk: Wire up CYPD6129 USB Type-C ports Akash Kumar
2026-11-19 18:13 ` [PATCH 1/2] arm64: dts: qcom: lemans: Add graph port placeholders for USB Type-C muxing Akash Kumar
@ 2026-11-19 18:13 ` Akash Kumar
1 sibling, 0 replies; 3+ messages in thread
From: Akash Kumar @ 2026-11-19 18:13 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Abel Vesa, Rob Herring,
Dmitry Baryshkov, Krzysztof Kozlowski, Conor Dooley
Cc: linux-kernel, linux-arm-msm, devicetree
Add the CYPD6129 UCSI PD controller, reached through a PCA9546 I2C
mux on i2c11, for the two USB Type-C connectors on the Draco EVK
carrier board. Hook up its OF graph connectors to the usb_1 HS/SS
endpoints to drive Type-C role switching and SuperSpeed/HS muxing.
Signed-off-by: Akash Kumar <akash.kumar@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/lemans-draco-evk.dts | 110 ++++++++++++++++++
1 file changed, 110 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts b/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts
index 7ac3a867d29a..fe7c676b8035 100644
--- a/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-draco-evk.dts
@@ -4,6 +4,7 @@
*/
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
#include "lemans-draco-som.dtsi"
@@ -351,6 +352,89 @@ queue3 {
};
};
+&i2c11 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ typec@40 {
+ compatible = "cypress,cypd6229", "cypress,cypd6129";
+ reg = <0x40>;
+ interrupts-extended = <&pmm8654au_2_gpios 5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&usb0_intr_state>;
+ pinctrl-names = "default";
+ wakeup-source;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ label = "USB0-Type-C";
+ data-role = "dual";
+ power-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ucsi_ccg_port0_hs: endpoint {
+ remote-endpoint = <&usb_0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ucsi_ccg_port0_ss: endpoint {
+ remote-endpoint = <&usb_0_dwc3_ss>;
+ };
+ };
+ };
+ };
+
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ label = "USB1-Type-C";
+ data-role = "dual";
+ power-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ucsi_ccg_port1_hs: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ucsi_ccg_port1_ss: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
+};
+
&i2c18 {
status = "okay";
@@ -636,6 +720,16 @@ pcie@0,1 {
};
};
+&pmm8654au_2_gpios {
+ usb0_intr_state: usb0-intr-state {
+ pins = "gpio5";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ power-source = <0>;
+ };
+};
+
&qup_i2c4_default {
drive-strength = <6>;
bias-pull-up;
@@ -776,3 +870,19 @@ uart17_ep: endpoint {
};
};
};
+
+&usb_0_dwc3_hs {
+ remote-endpoint = <&ucsi_ccg_port0_hs>;
+};
+
+&usb_0_dwc3_ss {
+ remote-endpoint = <&ucsi_ccg_port0_ss>;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&ucsi_ccg_port1_hs>;
+};
+
+&usb_1_dwc3_ss {
+ remote-endpoint = <&ucsi_ccg_port1_ss>;
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-19 18:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-19 18:13 [PATCH 0/2] arm64: dts: qcom: lemans-draco-evk: Wire up CYPD6129 USB Type-C ports Akash Kumar
2026-11-19 18:13 ` [PATCH 1/2] arm64: dts: qcom: lemans: Add graph port placeholders for USB Type-C muxing Akash Kumar
2026-11-19 18:13 ` [PATCH 2/2] arm64: dts: qcom: lemans-draco-evk: Wire up CYPD6129 USB Type-C ports Akash Kumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox