Devicetree
 help / color / mirror / Atom feed
From: Jonas Karlman <jonas@kwiboo.se>
To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Jonas Karlman <jonas@kwiboo.se>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] ARM: dts: rockchip: Add ArmSoM Forge1 board
Date: Sun, 22 Nov 2026 18:45:30 +0000	[thread overview]
Message-ID: <20261122184532.1300004-3-jonas@kwiboo.se> (raw)
In-Reply-To: <20261122184532.1300004-1-jonas@kwiboo.se>

ArmSoM Forge1​​ is an industrial-grade product powered by the ​​RK3506J
triple-core Cortex-A7 application processor​​. It is specifically designed
for industrial gateways, HMIs, PLCs, handheld POS devices, and home
appliance display/control applications.

Link: https://docs.armsom.org/armsom-forge1
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
As mentioned in cover letter, unclear if this should use
rockchip,rk3506b instead of rockchip,rk3506.
---
 arch/arm/boot/dts/rockchip/Makefile           |   3 +-
 .../dts/rockchip/rk3506j-armsom-forge1.dts    | 229 ++++++++++++++++++
 2 files changed, 231 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/rockchip/rk3506j-armsom-forge1.dts

diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile
index faebeb20f467..ef11b2b95ae4 100644
--- a/arch/arm/boot/dts/rockchip/Makefile
+++ b/arch/arm/boot/dts/rockchip/Makefile
@@ -49,4 +49,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3506-luckfox-lyra-plus.dtb \
 	rk3506-luckfox-lyra.dtb \
 	rk3506b-luckfox-lyra-ultra.dtb \
-	rk3506b-luckfox-lyra-zero-w.dtb
+	rk3506b-luckfox-lyra-zero-w.dtb \
+	rk3506j-armsom-forge1.dtb
diff --git a/arch/arm/boot/dts/rockchip/rk3506j-armsom-forge1.dts b/arch/arm/boot/dts/rockchip/rk3506j-armsom-forge1.dts
new file mode 100644
index 000000000000..6520fa700f64
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rk3506j-armsom-forge1.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3506.dtsi"
+
+/ {
+	model = "ArmSoM Forge1";
+	compatible = "armsom,forge1", "rockchip,rk3506";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASKROM";
+			press-threshold-microvolt = <0>;
+			linux,code = <KEY_SETUP>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&run_led>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_0v9: regulator-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb20_otg1: regulator-5v0-usb20-otg1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_otg1_drv_h>;
+		regulator-name = "vcc5v0_usb20_otg1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_ddr: regulator-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		bootph-pre-ram;
+		bootph-some-ram;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru CLK_MAC0>;
+	assigned-clock-rates = <50000000>;
+	phy-handle = <&rmii_phy0>;
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_rmii0_miim>, <&eth_rmii0_tx_bus2>,
+		    <&eth_rmii0_rx_bus2>, <&eth_rmii0_clk>;
+	clock_in_out = "output";
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru CLK_MAC1>;
+	assigned-clock-rates = <50000000>;
+	phy-handle = <&rmii_phy1>;
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_rmii1_miim>, <&eth_rmii1_tx_bus2>,
+		    <&eth_rmii1_rx_bus2>, <&eth_rmii1_clk>;
+	clock_in_out = "output";
+	status = "okay";
+};
+
+&mdio0 {
+	rmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii0_rstn>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii1_rstn>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		rmii0_rstn: rmii0-rstn {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		rmii1_rstn: rmii1-rstn {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		run_led: run-led {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtc {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_det_l: sdmmc-det-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb20_otg1_drv_h: usb20-otg1-drv-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-sdio;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_det_l>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
-- 
2.56.1


  parent reply	other threads:[~2026-11-22 18:46 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-22 18:45 [PATCH 0/2] ARM: dts: rockchip: Add ArmSoM Forge1 board Jonas Karlman
2026-11-22 18:45 ` [PATCH 1/2] dt-bindings: arm: rockchip: Add ArmSoM Forge1 Jonas Karlman
2026-11-22 18:45 ` Jonas Karlman [this message]
2026-11-22 18:53   ` [PATCH 2/2] ARM: dts: rockchip: Add ArmSoM Forge1 board sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261122184532.1300004-3-jonas@kwiboo.se \
    --to=jonas@kwiboo.se \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox