Re: [PATCH v3 1/1] USB: core: let USB device know device node

[Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>]

On Tuesday 19 January 2016 11:08:59 Peter Chen wrote:
> 
> I am afraid I have no USB 3.0 PC running Linux.
> 
> > > - Which the value of hub->descriptor->bNbrPorts for root hub?
> > 
> > In the example above, the legacy root hub would have bNbrPorts set to 6 
> > and the SS root hub would have bNbrPorts set to 3.
> > 
> 
> Ok, so the maximum physical port number is 6 as well as bNbrports value.
> The "reg" value at dts should be from 1 to 6. "reg" stands for physical
> port number for individual physical port, eg if "reg" equals to 1, it
> stands for the device connects at port 1, no matter the device is HS or
> SS, it can use the node whose "reg" is 1.

As I understand it, you could have two devices that are both
connected to port '1', when one is using HS and the other is using
SS. This means that we can't use the same 'reg' value for both, and
we have to define a particular way to disambiguate them.

As Alan says, there is an established ordering that just sorts the
ports form 1 to 9 in the example, and that would be the most
straightforward to use here.

Alternatively, you could use one of the high bits of the 'reg' value
to indicate which root hub is used. I'm sure that would work as
well, but be less obvious.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html