Re: [PATCH v2 2/4] arm64: dts: qcom: lemans-pmics: Add ADC support for PMM8654au

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 6/14/26 10:05 AM, Jishnu Prakash wrote:
> From: Ayyagari Ushasreevalli <aushasre@qti.qualcomm.com>
> 
> Add ADC nodes for the four PMM8654au PMICs (pmm8654au_0 through
> pmm8654au_3) on the Lemans platform.
> 
> Each ADC node exposes the following ADC channels:
> - DIE_TEMP: PMIC die temperature channel
> - VPH_PWR: Battery/supply voltage channel
> 
> Also add the io-channels and io-channel-names properties under
> the temp-alarm nodes so that they can get temperature reading
> from the ADC die_temp channels.
> 
> Signed-off-by: Ayyagari Ushasreevalli <aushasre@qti.qualcomm.com>
> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
> ---

[...]

> +		pmm8654au_0_adc: adc@8000 {
> +			compatible = "qcom,spmi-adc5-gen3";
> +			reg = <0x8000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			interrupts = <0x0 0x80 0x1 IRQ_TYPE_EDGE_RISING>;
> +			#io-channel-cells = <1>;

Same nit as patch 3

and only now I realized - s/interrupts/interrupts-extended - this is
necessary for !Linux, see

2d5cab9232ba ("arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly")

with that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad