public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Abel Vesa <abelvesa@kernel.org>, Frank Li <frank.li@nxp.com>,
	Peng Fan <peng.fan@nxp.com>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Abel Vesa <abel.vesa@linaro.org>,
	Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH 4/5] clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR
Date: Tue, 01 Jul 2025 11:29:34 +0200	[thread overview]
Message-ID: <4665053.LvFx2qVVIh@steina-w> (raw)
In-Reply-To: <20250701-imx95-blk-ctl-7-1-v1-4-00db23bd8876@nxp.com>

Hi,

thanks for the patch.

Am Dienstag, 1. Juli 2025, 09:04:40 CEST schrieb Peng Fan:
> i.MX94 BLK CTL LVDS CSR's LVDS_PHY_CLOCK_CONTRL register controls the clock
> gating logic of LVDS units. Display CSR's DISPLAY_ENGINES_CLOCK_CONTROL
> register controls the selection of the clock feeding the display engine.
> 
> Add clock gate support for the two CSRs.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/clk/imx/clk-imx95-blk-ctl.c | 50 ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 49 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/imx/clk-imx95-blk-ctl.c b/drivers/clk/imx/clk-imx95-blk-ctl.c
> index 828ee0a81ff62c6e4f61eef350b9073f19f5351f..5fe582b0d4a9a197f2c1a49dc18f15ca83ccb4a4 100644
> --- a/drivers/clk/imx/clk-imx95-blk-ctl.c
> +++ b/drivers/clk/imx/clk-imx95-blk-ctl.c
> @@ -1,8 +1,9 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
> - * Copyright 2024 NXP
> + * Copyright 2024-2025 NXP
>   */
>  
> +#include <dt-bindings/clock/nxp,imx94-clock.h>
>  #include <dt-bindings/clock/nxp,imx95-clock.h>
>  #include <linux/clk.h>
>  #include <linux/clk-provider.h>
> @@ -300,6 +301,51 @@ static const struct imx95_blk_ctl_dev_data hsio_blk_ctl_dev_data = {
>  	.clk_reg_offset = 0,
>  };
>  
> +static const struct imx95_blk_ctl_clk_dev_data imx94_lvds_clk_dev_data[] = {
> +	[IMX94_CLK_DISPMIX_LVDS_CLK_GATE] = {
> +		.name = "lvds_clk_gate",
> +		.parent_names = (const char *[]){ "ldbpll", },
> +		.num_parents = 1,
> +		.reg = 0,
> +		.bit_idx = 1,
> +		.bit_width = 1,
> +		.type = CLK_GATE,
> +		.flags = CLK_SET_RATE_PARENT,
> +		.flags2 = CLK_GATE_SET_TO_DISABLE,
> +	},
> +};
> +
> +static const struct imx95_blk_ctl_dev_data imx94_lvds_csr_dev_data = {
> +	.num_clks = ARRAY_SIZE(imx94_lvds_clk_dev_data),
> +	.clk_dev_data = imx94_lvds_clk_dev_data,
> +	.clk_reg_offset = 0,
> +	.rpm_enabled = true,
> +};
> +
> +static const char * const imx94_disp_engine_parents[] = {
> +	"disppix", "ldb_pll_div7"
> +};
> +
> +static const struct imx95_blk_ctl_clk_dev_data imx94_dispmix_csr_clk_dev_data[] = {
> +	[IMX94_CLK_DISPMIX_CLK_SEL] = {
> +		.name = "disp_clk_sel",
> +		.parent_names = imx94_disp_engine_parents,
> +		.num_parents = ARRAY_SIZE(imx94_disp_engine_parents),
> +		.reg = 0,
> +		.bit_idx = 1,
> +		.bit_width = 1,
> +		.type = CLK_MUX,
> +		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
> +	},
> +};
> +
> +static const struct imx95_blk_ctl_dev_data imx94_dispmix_csr_dev_data = {
> +	.num_clks = ARRAY_SIZE(imx94_dispmix_csr_clk_dev_data),
> +	.clk_dev_data = imx94_dispmix_csr_clk_dev_data,
> +	.clk_reg_offset = 0,
> +	.rpm_enabled = true,
> +};
> +
>  static int imx95_bc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -474,6 +520,8 @@ static const struct of_device_id imx95_bc_of_match[] = {
>  	{ .compatible = "nxp,imx95-hsio-blk-ctl", .data = &hsio_blk_ctl_dev_data },
>  	{ .compatible = "nxp,imx95-vpu-csr", .data = &vpublk_dev_data },
>  	{ .compatible = "nxp,imx95-netcmix-blk-ctrl", .data = &netcmix_dev_data},
> +	{ .compatible = "nxp,imx94-lvds-csr", .data = &imx94_lvds_csr_dev_data },
> +	{ .compatible = "nxp,imx94-display-csr", .data = &imx94_dispmix_csr_dev_data },

Similar to patch 1, sort them properly.

Best regards,
Alexander

>  	{ /* Sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, imx95_bc_of_match);
> 
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/



  reply	other threads:[~2025-07-01  9:29 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-01  7:04 [PATCH 0/5] clock: imx95: Add LVDS/DISPLAY CSR for i.MX94 Peng Fan
2025-07-01  7:04 ` [PATCH 1/5] dt-bindings: clock: Add support for i.MX94 LVDS/DISPLAY CSR Peng Fan
2025-07-01  9:28   ` Alexander Stein
2025-07-01 11:38   ` Krzysztof Kozlowski
2025-07-01 13:04     ` Peng Fan
2025-07-01 13:25       ` Krzysztof Kozlowski
2025-07-01 13:43         ` Peng Fan
2025-07-01  7:04 ` [PATCH 2/5] clk: imx95-blk-ctl: Fix synchronous abort Peng Fan
2025-07-01  7:04 ` [PATCH 3/5] clk: imx95-blk-ctl: Rename lvds and displaymix csr blk Peng Fan
2025-07-01  7:04 ` [PATCH 4/5] clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR Peng Fan
2025-07-01  9:29   ` Alexander Stein [this message]
2025-07-01 14:57     ` Peng Fan
2025-07-01  7:04 ` [PATCH 5/5] arm64: dts: imx943: Add LVDS/DISPLAY CSR nodes Peng Fan
2025-07-01  9:28   ` Alexander Stein
2025-07-01 14:40     ` Peng Fan
2025-07-01 11:38   ` Krzysztof Kozlowski
2025-07-01 14:34     ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4665053.LvFx2qVVIh@steina-w \
    --to=alexander.stein@ew.tq-group.com \
    --cc=abel.vesa@linaro.org \
    --cc=abelvesa@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frank.li@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=peng.fan@nxp.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox