[PATCH 0/5] Minor dt warnings fixes

[PATCH 0/5] Minor dt warnings fixes

[Konrad Dybcio]

Nothing particularly of note, mechanical fixes

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
Konrad Dybcio (5):
      arm64: dts: qcom: msm8998-sony-yoshino: Drop extra bias-disable
      arm64: dts: qcom: msm8976-longcheer-l9360: Fix accidental node override
      arm64: dts: qcom: sdm632-motorola-ocean: Fix LED default trigger property
      arm64: dts: qcom: qcs8300-ride: Fix BT RFA supply name
      arm64: dts: qcom: talos-evk-som: Fix BT RFA supply name

 arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts      | 4 ++--
 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 4 ----
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts                 | 2 +-
 arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts        | 2 +-
 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi               | 2 +-
 5 files changed, 5 insertions(+), 9 deletions(-)
---
base-commit: 49e02880ec0a8c378e811bc9d85da188d7c6204c
change-id: 20260610-topic-june26_dts_fixes-c32e3cf85fdf

Best regards,
--  
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

[PATCH 1/5] arm64: dts: qcom: msm8998-sony-yoshino: Drop extra bias-disable

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

The msm8998-common i2c5 pin sleep state is defined with a pull-up. The
Sony Yoshino DTSI attempts to override that to bias-disable without
removing the existing bias-pull-up. Remove the override and use the
common definition to resolve a dt checker warning.

The change itself shouldn't have any functional effect, maybe except
a miniscule increase in power usage. The defaults may need revisiting
at a later date either way.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 3650f2501886..04d4741cdb5f 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -229,10 +229,6 @@ rmi4-f11@11 {
 	};
 };
 
-&blsp1_i2c5_sleep {
-	bias-disable;
-};
-
 &blsp1_uart3 {
 	status = "okay";
 

-- 
2.54.0

Re: [PATCH 1/5] arm64: dts: qcom: msm8998-sony-yoshino: Drop extra bias-disable

[Krzysztof Kozlowski]

On 10/06/2026 13:43, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> The msm8998-common i2c5 pin sleep state is defined with a pull-up. The
> Sony Yoshino DTSI attempts to override that to bias-disable without
> removing the existing bias-pull-up. Remove the override and use the
> common definition to resolve a dt checker warning.

Maybe the bias-pull-up should be simply removed? At least you should
document here why you chosen that way to fix the warning.

> 
> The change itself shouldn't have any functional effect, maybe except
> a miniscule increase in power usage. The defaults may need revisiting
> at a later date either way.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 4 ----
>  1 file changed, 4 deletions(-)
> 
Best regards,
Krzysztof

Re: [PATCH 1/5] arm64: dts: qcom: msm8998-sony-yoshino: Drop extra bias-disable

[Konrad Dybcio]

On 6/10/26 2:00 PM, Krzysztof Kozlowski wrote:
> On 10/06/2026 13:43, Konrad Dybcio wrote:
>> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>>
>> The msm8998-common i2c5 pin sleep state is defined with a pull-up. The
>> Sony Yoshino DTSI attempts to override that to bias-disable without
>> removing the existing bias-pull-up. Remove the override and use the
>> common definition to resolve a dt checker warning.
> 
> Maybe the bias-pull-up should be simply removed? At least you should
> document here why you chosen that way to fix the warning.

Seems that way. Unfortunately it was yours truly who set it up that way
back in 2021.. but I don't see a reason for the pull-up to be there when
the I2C controller is disabled. Maa-a-aybe for some obscure wake up
notifications but that's beyond me.

msm-4.4 sets bias-disabled for all sleep states for all i2c controllers
and e.g. msm8998-xiaomi-sagit overrides that back.

I think the right thing to do would be to set bias-disabled by default
and that's what I'm gonna do for v2

Konrad

[PATCH 2/5] arm64: dts: qcom: msm8976-longcheer-l9360: Fix accidental node override

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

The active and sleep pinctrl states for the touchscreen interrupt pin
shared the same node name, creating a single node, accidentally
overridden immediately after the definition. Alter the names to make
them distinct and to silence DT checker warnings.

Fixes: 79b896e7da7e ("arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
index 18832a3b9a1c..57f549f06f73 100644
--- a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
+++ b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
@@ -455,14 +455,14 @@ sdc2_cd_sleep: sdc2-cd-sleep-state {
 		bias-disable;
 	};
 
-	ts_int_default: ts-int-state {
+	ts_int_default: ts-int-default-state {
 		pins = "gpio65";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	ts_int_sleep: ts-int-state {
+	ts_int_sleep: ts-int-sleep-state {
 		pins = "gpio65";
 		function = "gpio";
 		drive-strength = <2>;

-- 
2.54.0

Re: [PATCH 2/5] arm64: dts: qcom: msm8976-longcheer-l9360: Fix accidental node override

[Krzysztof Kozlowski]

On 10/06/2026 13:43, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> The active and sleep pinctrl states for the touchscreen interrupt pin
> shared the same node name, creating a single node, accidentally
> overridden immediately after the definition. Alter the names to make
> them distinct and to silence DT checker warnings.
> 
> Fixes: 79b896e7da7e ("arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH 3/5] arm64: dts: qcom: sdm632-motorola-ocean: Fix LED default trigger property

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

The correct property name is "linux,default-trigger", not
"default-trigger". Fix it to avoid DT checker warnings and let the OSes
consume the intended information.

Fixes: 3176c4d6b9be ("arm64: dts: qcom: sdm632: Add device tree for Motorola G7 Power")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
index 2f55db0c8ce3..9ea3e5e76bf9 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
@@ -130,7 +130,7 @@ led-controller@36 {
 
 		led: led@1 {
 			reg = <1>;
-			default-trigger = "backlight";
+			linux,default-trigger = "backlight";
 			function = LED_FUNCTION_BACKLIGHT;
 			led-sources = <0 1 2>;
 		};

-- 
2.54.0

Re: [PATCH 3/5] arm64: dts: qcom: sdm632-motorola-ocean: Fix LED default trigger property

[Krzysztof Kozlowski]

On 10/06/2026 13:43, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> The correct property name is "linux,default-trigger", not
> "default-trigger". Fix it to avoid DT checker warnings and let the OSes
> consume the intended information.
> 
> Fixes: 3176c4d6b9be ("arm64: dts: qcom: sdm632: Add device tree for Motorola G7 Power")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH 4/5] arm64: dts: qcom: qcs8300-ride: Fix BT RFA supply name

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Fix up the supply name to align with bindings.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index e9a8553a8d82..1ff39530ea3d 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -837,7 +837,7 @@ bluetooth: bluetooth {
 		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
 		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
 		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
-		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
 	};
 };
 

-- 
2.54.0

Re: [PATCH 4/5] arm64: dts: qcom: qcs8300-ride: Fix BT RFA supply name

[Krzysztof Kozlowski]

On 10/06/2026 13:43, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> Fix up the supply name to align with bindings.

... with qcom,wcn6855-bt bindings, because vddrfa1p8-supply is only in
ATH11K part.

or something similar, because your change is non-obvious and requires a
bit of grepping.


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH 5/5] arm64: dts: qcom: talos-evk-som: Fix BT RFA supply name

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Fix up the supply name to align with bindings.

Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
index 294354c034c3..93e08e141dfb 100644
--- a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
@@ -527,7 +527,7 @@ bluetooth {
 		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
 		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
 		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
-		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
 	};
 };
 

-- 
2.54.0

Re: [PATCH 5/5] arm64: dts: qcom: talos-evk-som: Fix BT RFA supply name

[Krzysztof Kozlowski]

On 10/06/2026 13:43, Konrad Dybcio wrote:
> From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> Fix up the supply name to align with bindings.

Could be improved the same way:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof