Re: [PATCH v5 4/6] mfd: qcom-pm8xxx: register PM8921 USB ID extcon

["MINETTE Alexandre" <contact@alex-min.fr>]

Hi Lee, 

Thanks for the feedback!

For the v6 series, I'll add a proper define for the 49 IRQ and use the devm api indeed.

About using the MFD api: I looked at it, but devm_mfd_add_devices()  
doesn't seem to let me reuse the parent firmware node, which I need here  
because the DT consumer uses extcon = <&pm8921>. 
So I kept  platform_device_register_full().
Let me know if I missed something here.

Thanks,
Alexandre
-- 
  MINETTE Alexandre
  contact@alex-min.fr

Mer 12 août 2026, à 14:29, Lee Jones a écrit :
> On Tue, 04 Aug 2026, Alexandre MINETTE via B4 Relay wrote:
>
>> From: Alexandre MINETTE <contact@alex-min.fr>
>> 
>> PM8921 reports the USB ID pin through interrupt 49 of its interrupt
>> controller. Unlike PM8941, this path has no separate addressable misc
>> block to represent as a devicetree child node.
>> 
>> Register a child platform device for the existing Qualcomm USB extcon
>> driver after creating the PMIC IRQ domain. Pass the USB ID interrupt as
>> a named resource and reuse the PM8921 firmware node, allowing consumers
>> to reference the PMIC node directly as their extcon provider.
>> 
>> Unregister the child device and dispose of the IRQ mapping when the
>> PMIC is removed or probing fails.
>> 
>> Signed-off-by: Alexandre MINETTE <contact@alex-min.fr>
>> ---
>>  drivers/mfd/qcom-pm8xxx.c | 78 +++++++++++++++++++++++++++++++++++++++++++++--
>>  1 file changed, 76 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/mfd/qcom-pm8xxx.c b/drivers/mfd/qcom-pm8xxx.c
>> index 0cf374c015ce..884fc99a1488 100644
>> --- dangerously/mfd/qcom-pm8xxx.c
>> +++ b/drivers/mfd/qcom-pm8xxx.c
>> @@ -7,6 +7,7 @@
>>  
>>  #include <linux/kernel.h>
>>  #include <linux/interrupt.h>
>> +#include <linux/ioport.h>
>>  #include <linux/irqchip/chained_irq.h>
>>  #include <linux/irq.h>
>>  #include <linux/irqdomain.h>
>> @@ -64,12 +65,15 @@
>>  
>>  struct pm_irq_data {
>>  	int num_irqs;
>> +	int usb_id_irq;
>>  	struct irq_chip *irq_chip;
>>  	irq_handler_t irq_handler;
>>  };
>>  
>>  struct pm_irq_chip {
>>  	struct regmap		*regmap;
>> +	struct platform_device	*usb_extcon;
>> +	unsigned int		usb_id_irq;
>>  	spinlock_t		pm_irq_lock;
>>  	struct irq_domain	*irqdomain;
>>  	unsigned int		num_blocks;
>> @@ -492,6 +496,13 @@ static const struct pm_irq_data pm8xxx_data = {
>>  	.irq_handler = pm8xxx_irq_handler,
>>  };
>>  
>> +static const struct pm_irq_data pm8921_data = {
>> +	.num_irqs = PM8XXX_NR_IRQS,
>> +	.usb_id_irq = 49,
>
> Magic numbers should be defined.
>
>> +	.irq_chip = &pm8xxx_irq_chip,
>> +	.irq_handler = pm8xxx_irq_handler,
>> +};
>> +
>>  static const struct pm_irq_data pm8821_data = {
>>  	.num_irqs = PM8821_NR_IRQS,
>>  	.irq_chip = &pm8821_irq_chip,
>> @@ -501,11 +512,60 @@ static const struct pm_irq_data pm8821_data = {
>>  static const struct of_device_id pm8xxx_id_table[] = {
>>  	{ .compatible = "qcom,pm8058", .data = &pm8xxx_data},
>>  	{ .compatible = "qcom,pm8821", .data = &pm8821_data},
>> -	{ .compatible = "qcom,pm8921", .data = &pm8xxx_data},
>> +	{ .compatible = "qcom,pm8921", .data = &pm8921_data},
>>  	{ }
>>  };
>>  MODULE_DEVICE_TABLE(of, pm8xxx_id_table);
>>  
>> +static int pm8xxx_add_usb_extcon(struct platform_device *pdev,
>> +				 struct pm_irq_chip *chip,
>> +				 unsigned int hwirq)
>> +{
>> +	struct irq_fwspec fwspec = {
>> +		.fwnode = dev_fwnode(&pdev->dev),
>> +		.param_count = 2,
>> +		.param = { hwirq, IRQ_TYPE_EDGE_BOTH },
>> +	};
>> +	struct platform_device_info pdevinfo = {
>> +		.parent = &pdev->dev,
>> +		.fwnode = dev_fwnode(&pdev->dev),
>> +		.of_node_reused = true,
>> +		.name = "qcom-pm8xxx-usb-id",
>> +		.id = PLATFORM_DEVID_NONE,
>> +	};
>> +	struct resource resource;
>> +
>> +	chip->usb_id_irq = irq_create_fwspec_mapping(&fwspec);
>> +	if (!chip->usb_id_irq)
>> +		return -ENXIO;
>> +
>> +	resource = DEFINE_RES_IRQ_NAMED(chip->usb_id_irq, "usb_id");
>> +	pdevinfo.res = &resource;
>> +	pdevinfo.num_res = 1;
>> +
>> +	chip->usb_extcon = platform_device_register_full(&pdevinfo);
>
> Why aren't you using the MFD API for this?
>
>> +	if (IS_ERR(chip->usb_extcon)) {
>> +		int ret = PTR_ERR(chip->usb_extcon);
>> +
>> +		chip->usb_extcon = NULL;
>> +		irq_dispose_mapping(chip->usb_id_irq);
>> +		chip->usb_id_irq = 0;
>> +
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void pm8xxx_remove_usb_extcon(struct pm_irq_chip *chip)
>> +{
>> +	if (chip->usb_extcon)
>> +		platform_device_unregister(chip->usb_extcon);
>> +
>> +	if (chip->usb_id_irq)
>> +		irq_dispose_mapping(chip->usb_id_irq);
>> +}
>
> Why not devm_*
>
>>  static int pm8xxx_probe(struct platform_device *pdev)
>>  {
>>  	const struct pm_irq_data *data;
>> @@ -570,9 +630,22 @@ static int pm8xxx_probe(struct platform_device *pdev)
>>  
>>  	irq_set_irq_wake(irq, 1);
>>  
>> +	if (data->usb_id_irq) {
>> +		rc = pm8xxx_add_usb_extcon(pdev, chip, data->usb_id_irq);
>> +		if (rc)
>> +			goto err_domain;
>> +	}
>> +
>>  	rc = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
>>  	if (rc)
>> -		irq_domain_remove(chip->irqdomain);
>> +		goto err_extcon;
>> +
>> +	return 0;
>> +
>> +err_extcon:
>> +	pm8xxx_remove_usb_extcon(chip);
>> +err_domain:
>> +	irq_domain_remove(chip->irqdomain);
>>  
>>  	return rc;
>>  }
>> @@ -582,6 +655,7 @@ static void pm8xxx_remove(struct platform_device *pdev)
>>  	struct pm_irq_chip *chip = platform_get_drvdata(pdev);
>>  
>>  	of_platform_depopulate(&pdev->dev);
>> +	pm8xxx_remove_usb_extcon(chip);
>>  	irq_domain_remove(chip->irqdomain);
>>  }
>>  
>> 
>> -- 
>> 2.43.0
>> 
>> 
>
> -- 
> Lee Jones