Re: [PATCH v2 2/4] drm/bridge: simple: add Chrontel CH7218A

[Neil Armstrong <neil.armstrong@linaro.org>]

On 10/9/26 09:55, Xilin Wu wrote:
> The Chrontel CH7218A automatically boots its embedded firmware and
> operates without host-side configuration.
> 
> Add the CH7218A to the simple bridge driver and expose its output as an
> HDMI Type-A connector.
> 
> Tested-by: Daniele Briguglio <hello@superkali.me>
> Signed-off-by: Xilin Wu <sophon@radxa.com>
> ---
>   drivers/gpu/drm/bridge/simple-bridge.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/simple-bridge.c b/drivers/gpu/drm/bridge/simple-bridge.c
> index 3fba7002322e..fab793fb12b5 100644
> --- a/drivers/gpu/drm/bridge/simple-bridge.c
> +++ b/drivers/gpu/drm/bridge/simple-bridge.c
> @@ -275,6 +275,11 @@ static const struct of_device_id simple_bridge_match[] = {
>   		.data = &(const struct simple_bridge_info) {
>   			.connector_type = DRM_MODE_CONNECTOR_HDMIA,
>   		},
> +	}, {
> +		.compatible = "chrontel,ch7218a",
> +		.data = &(const struct simple_bridge_info) {
> +			.connector_type = DRM_MODE_CONNECTOR_HDMIA,
> +		},
>   	}, {
>   		.compatible = "mstar,tsumu88adt3-lf-1",
>   		.data = &(const struct simple_bridge_info) {
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Thanks,
Neil