Re: [PATCH] arm64: dts: qcom: hamoa-iot-evk: Enable retimer on USB0 port

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 4/22/26 11:39 AM, Prashanth K wrote:
> Add the retimer for usb_1_ss0 port (USB0), in order to enable
> super-speed enumeration on that port.
> 
> Fixes: c11645afb0e2 ("arm64: dts: qcom: Add base HAMOA-IOT-EVK board")
> Cc: stable@vger.kernel.org

This is a feature addition, not a fix

[...]

> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				retimer_ss0_ss_out: endpoint {
> +					remote-endpoint = <&pmic_glink_ss0_ss_in>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				retimer_ss0_ss_in: endpoint {
> +					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
> +				};
> +			};
> +

Stray \n, but you should really have a @2 port here as well.

Konrad