[PATCH v5 0/5] ARM: K2G: Add support for TI-SCI Generic PM Domains

[PATCH v5 0/5] ARM: K2G: Add support for TI-SCI Generic PM Domains

[Dave Gerlach]

Hi,
This is v5 of the series to add support for TI-SCI Generic PM Domains with
all ACKs in place and ready for Santosh to merge.

Previous versions can be found here:

v4: https://www.spinics.net/lists/arm-kernel/msg566778.html
v3: https://www.spinics.net/lists/kernel/msg2413975.html
v2: https://www.spinics.net/lists/kernel/msg2364612.html
v1: http://www.spinics.net/lists/arm-kernel/msg525204.html

Mostly just a resend of v4 with all ACKs and Reviewed-by tags in place with
the exception of a dropped sentence in patch 3 to avoid referencing Linux
specific behavior in the DT binding doc. Otherwise everything else is
unmodified.

Ulf and Santosh, I kept your Reviewed-by and Acked-by tags in Patch 3 because
the change was so minor and I still wanted to give you credit for taking the
time to review the patch, any issues and I'd be happy to change that.

Regards,
Dave

Dave Gerlach (5):
  PM / Domains: Add generic data pointer to genpd data struct
  PM / Domains: Do not check if simple providers have phandle cells
  dt-bindings: Add TI SCI PM Domains
  soc: ti: Add ti_sci_pm_domains driver
  ARM: keystone: Drop PM domain support for k2g

 .../devicetree/bindings/soc/ti/sci-pm-domain.txt   |  57 ++++++
 MAINTAINERS                                        |   3 +
 arch/arm/mach-keystone/Kconfig                     |   1 +
 arch/arm/mach-keystone/pm_domain.c                 |   4 +-
 drivers/base/power/domain.c                        |   2 -
 drivers/soc/ti/Kconfig                             |  12 ++
 drivers/soc/ti/Makefile                            |   1 +
 drivers/soc/ti/ti_sci_pm_domains.c                 | 202 +++++++++++++++++++++
 include/dt-bindings/genpd/k2g.h                    |  90 +++++++++
 include/linux/pm_domain.h                          |   1 +
 10 files changed, 370 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 create mode 100644 drivers/soc/ti/ti_sci_pm_domains.c
 create mode 100644 include/dt-bindings/genpd/k2g.h

-- 
2.11.0

[PATCH v5 1/5] PM / Domains: Add generic data pointer to genpd data struct

[Dave Gerlach]

Add a void *data pointer to struct generic_pm_domain_data. Because this
exists for each device associated with a genpd it will allow us to
assign per-device data if needed on a platform for control of that
specific device.

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 include/linux/pm_domain.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 5339ed5bd6f9..b213d22daefd 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -117,6 +117,7 @@ struct generic_pm_domain_data {
 	struct pm_domain_data base;
 	struct gpd_timing_data td;
 	struct notifier_block nb;
+	void *data;
 };
 
 #ifdef CONFIG_PM_GENERIC_DOMAINS
-- 
2.11.0

[PATCH v5 2/5] PM / Domains: Do not check if simple providers have phandle cells

[Dave Gerlach]

There is no reason that a platform genpd driver registered using
of_genpd_add_provider_simple needs to be constrained to having no cells
in the "power-domains" phandle. Currently the genpd framework will fail
if any arguments are passed with for a simple provider but the framework
does not actually care, so remove the check for phandle argument count.

This will allow greater flexibility for genpd providers to use their own
arguments that are passed in the phandle and interpret them however they
see fit.

Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 drivers/base/power/domain.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index e697dec9d25b..8e0550c27394 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1622,8 +1622,6 @@ static struct generic_pm_domain *genpd_xlate_simple(
 					struct of_phandle_args *genpdspec,
 					void *data)
 {
-	if (genpdspec->args_count != 0)
-		return ERR_PTR(-EINVAL);
 	return data;
 }
 
-- 
2.11.0

[PATCH v5 3/5] dt-bindings: Add TI SCI PM Domains

[Dave Gerlach]

Add a generic power domain implementation, TI SCI PM Domains, that
will hook into the genpd framework and allow the TI SCI protocol to
control device power states.

Also, provide macros representing each device index as understood
by TI SCI to be used in the device node power-domain references.
These are identifiers for the K2G devices managed by the PMMC.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
v4->v5: Drop last sentence of first paragraph to avoid describing Linux
	driver behavior in dt binding doc.

 .../devicetree/bindings/soc/ti/sci-pm-domain.txt   | 57 ++++++++++++++
 MAINTAINERS                                        |  2 +
 include/dt-bindings/genpd/k2g.h                    | 90 ++++++++++++++++++++++
 3 files changed, 149 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 create mode 100644 include/dt-bindings/genpd/k2g.h

diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
new file mode 100644
index 000000000000..c705db07d820
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
@@ -0,0 +1,57 @@
+Texas Instruments TI-SCI Generic Power Domain
+---------------------------------------------
+
+Some TI SoCs contain a system controller (like the PMMC, etc...) that is
+responsible for controlling the state of the IPs that are present.
+Communication between the host processor running an OS and the system
+controller happens through a protocol known as TI-SCI [1].
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+PM Domain Node
+==============
+The PM domain node represents the global PM domain managed by the PMMC, which
+in this case is the implementation as documented by the generic PM domain
+bindings in Documentation/devicetree/bindings/power/power_domain.txt.  Because
+this relies on the TI SCI protocol to communicate with the PMMC it must be a
+child of the pmmc node.
+
+Required Properties:
+--------------------
+- compatible: should be "ti,sci-pm-domain"
+- #power-domain-cells: Must be 1 so that an id can be provided in each
+		       device node.
+
+Example (K2G):
+-------------
+	pmmc: pmmc {
+		compatible = "ti,k2g-sci";
+		...
+
+		k2g_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <1>;
+		};
+	};
+
+PM Domain Consumers
+===================
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node
+along with an index representing the device id to be passed to the PMMC
+for device control.
+
+Required Properties:
+--------------------
+- power-domains: phandle pointing to the corresponding PM domain node
+		 and an ID representing the device.
+
+See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
+
+Example (K2G):
+--------------------
+	uart0: serial@02530c00 {
+		compatible = "ns16550a";
+		...
+		power-domains = <&k2g_pds K2G_DEV_UART0>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 1b0a87ffffab..ae43f3e95b47 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12382,6 +12382,8 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
 F:	drivers/firmware/ti_sci*
 F:	include/linux/soc/ti/ti_sci_protocol.h
+F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+F:	include/dt-bindings/genpd/k2g.h
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
diff --git a/include/dt-bindings/genpd/k2g.h b/include/dt-bindings/genpd/k2g.h
new file mode 100644
index 000000000000..1f31f17e19eb
--- /dev/null
+++ b/include/dt-bindings/genpd/k2g.h
@@ -0,0 +1,90 @@
+/*
+ * TI K2G SoC Device definitions
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_GENPD_K2G_H
+#define _DT_BINDINGS_GENPD_K2G_H
+
+/* Documented in http://processors.wiki.ti.com/index.php/TISCI */
+
+#define K2G_DEV_PMMC0			0x0000
+#define K2G_DEV_MLB0			0x0001
+#define K2G_DEV_DSS0			0x0002
+#define K2G_DEV_MCBSP0			0x0003
+#define K2G_DEV_MCASP0			0x0004
+#define K2G_DEV_MCASP1			0x0005
+#define K2G_DEV_MCASP2			0x0006
+#define K2G_DEV_DCAN0			0x0008
+#define K2G_DEV_DCAN1			0x0009
+#define K2G_DEV_EMIF0			0x000a
+#define K2G_DEV_MMCHS0			0x000b
+#define K2G_DEV_MMCHS1			0x000c
+#define K2G_DEV_GPMC0			0x000d
+#define K2G_DEV_ELM0			0x000e
+#define K2G_DEV_SPI0			0x0010
+#define K2G_DEV_SPI1			0x0011
+#define K2G_DEV_SPI2			0x0012
+#define K2G_DEV_SPI3			0x0013
+#define K2G_DEV_ICSS0			0x0014
+#define K2G_DEV_ICSS1			0x0015
+#define K2G_DEV_USB0			0x0016
+#define K2G_DEV_USB1			0x0017
+#define K2G_DEV_NSS0			0x0018
+#define K2G_DEV_PCIE0			0x0019
+#define K2G_DEV_GPIO0			0x001b
+#define K2G_DEV_GPIO1			0x001c
+#define K2G_DEV_TIMER64_0		0x001d
+#define K2G_DEV_TIMER64_1		0x001e
+#define K2G_DEV_TIMER64_2		0x001f
+#define K2G_DEV_TIMER64_3		0x0020
+#define K2G_DEV_TIMER64_4		0x0021
+#define K2G_DEV_TIMER64_5		0x0022
+#define K2G_DEV_TIMER64_6		0x0023
+#define K2G_DEV_MSGMGR0			0x0025
+#define K2G_DEV_BOOTCFG0		0x0026
+#define K2G_DEV_ARM_BOOTROM0		0x0027
+#define K2G_DEV_DSP_BOOTROM0		0x0029
+#define K2G_DEV_DEBUGSS0		0x002b
+#define K2G_DEV_UART0			0x002c
+#define K2G_DEV_UART1			0x002d
+#define K2G_DEV_UART2			0x002e
+#define K2G_DEV_EHRPWM0			0x002f
+#define K2G_DEV_EHRPWM1			0x0030
+#define K2G_DEV_EHRPWM2			0x0031
+#define K2G_DEV_EHRPWM3			0x0032
+#define K2G_DEV_EHRPWM4			0x0033
+#define K2G_DEV_EHRPWM5			0x0034
+#define K2G_DEV_EQEP0			0x0035
+#define K2G_DEV_EQEP1			0x0036
+#define K2G_DEV_EQEP2			0x0037
+#define K2G_DEV_ECAP0			0x0038
+#define K2G_DEV_ECAP1			0x0039
+#define K2G_DEV_I2C0			0x003a
+#define K2G_DEV_I2C1			0x003b
+#define K2G_DEV_I2C2			0x003c
+#define K2G_DEV_EDMA0			0x003f
+#define K2G_DEV_SEMAPHORE0		0x0040
+#define K2G_DEV_INTC0			0x0041
+#define K2G_DEV_GIC0			0x0042
+#define K2G_DEV_QSPI0			0x0043
+#define K2G_DEV_ARM_64B_COUNTER0	0x0044
+#define K2G_DEV_TETRIS0			0x0045
+#define K2G_DEV_CGEM0			0x0046
+#define K2G_DEV_MSMC0			0x0047
+#define K2G_DEV_CBASS0			0x0049
+#define K2G_DEV_BOARD0			0x004c
+#define K2G_DEV_EDMA1			0x004f
+
+#endif
-- 
2.11.0

[PATCH v5 4/5] soc: ti: Add ti_sci_pm_domains driver

[Dave Gerlach]

Introduce a ti_sci_pm_domains driver to act as a generic pm domain
provider to allow each device to attach and associate it's ti-sci-id so
that it can be controlled through the TI SCI protocol.

This driver implements a simple genpd where each device node has a
phandle to the power domain node and also must provide an index which
represents the ID to be passed with TI SCI representing the device using
a single phandle cell. The driver manually parses the phandle to get the
cell value. Through this interface the genpd dev_ops start and stop
hooks will use TI SCI to turn on and off each device as determined by
pm_runtime usage.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 MAINTAINERS                        |   1 +
 arch/arm/mach-keystone/Kconfig     |   1 +
 drivers/soc/ti/Kconfig             |  12 +++
 drivers/soc/ti/Makefile            |   1 +
 drivers/soc/ti/ti_sci_pm_domains.c | 202 +++++++++++++++++++++++++++++++++++++
 5 files changed, 217 insertions(+)
 create mode 100644 drivers/soc/ti/ti_sci_pm_domains.c

diff --git a/MAINTAINERS b/MAINTAINERS
index ae43f3e95b47..ca8026c39fc8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12384,6 +12384,7 @@ F:	drivers/firmware/ti_sci*
 F:	include/linux/soc/ti/ti_sci_protocol.h
 F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 F:	include/dt-bindings/genpd/k2g.h
+F:	drivers/soc/ti/ti_sci_pm_domains.c
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 554357035f30..db122356b410 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -10,6 +10,7 @@ config ARCH_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
 	select PINCTRL
+	select PM_GENERIC_DOMAINS if PM
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
 	  SoCs.
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 3557c5e32a93..39e152abe6b9 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -38,4 +38,16 @@ config WKUP_M3_IPC
 	  to communicate and use the Wakeup M3 for PM features like suspend
 	  resume and boots it using wkup_m3_rproc driver.
 
+config TI_SCI_PM_DOMAINS
+	tristate "TI SCI PM Domains Driver"
+	depends on TI_SCI_PROTOCOL
+	depends on PM_GENERIC_DOMAINS
+	help
+	  Generic power domain implementation for TI device implementing
+	  the TI SCI protocol.
+
+	  To compile this as a module, choose M here. The module will be
+	  called ti_sci_pm_domains. Note this is needed early in boot before
+	  rootfs may be available.
+
 endif # SOC_TI
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index 48ff3a79634f..7d572736c86e 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)	+= knav_qmss.o
 knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
 obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA)	+= knav_dma.o
 obj-$(CONFIG_WKUP_M3_IPC)		+= wkup_m3_ipc.o
+obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
diff --git a/drivers/soc/ti/ti_sci_pm_domains.c b/drivers/soc/ti/ti_sci_pm_domains.c
new file mode 100644
index 000000000000..b0b283810e72
--- /dev/null
+++ b/drivers/soc/ti/ti_sci_pm_domains.c
@@ -0,0 +1,202 @@
+/*
+ * TI SCI Generic Power Domain Driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *	J Keerthy <j-keerthy@ti.com>
+ *	Dave Gerlach <d-gerlach@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+
+/**
+ * struct ti_sci_genpd_dev_data: holds data needed for every device attached
+ *				 to this genpd
+ * @idx: index of the device that identifies it with the system
+ *	 control processor.
+ */
+struct ti_sci_genpd_dev_data {
+	int idx;
+};
+
+/**
+ * struct ti_sci_pm_domain: TI specific data needed for power domain
+ * @ti_sci: handle to TI SCI protocol driver that provides ops to
+ *	    communicate with system control processor.
+ * @dev: pointer to dev for the driver for devm allocs
+ * @pd: generic_pm_domain for use with the genpd framework
+ */
+struct ti_sci_pm_domain {
+	const struct ti_sci_handle *ti_sci;
+	struct device *dev;
+	struct generic_pm_domain pd;
+};
+
+#define genpd_to_ti_sci_pd(gpd) container_of(gpd, struct ti_sci_pm_domain, pd)
+
+/**
+ * ti_sci_dev_id(): get prepopulated ti_sci id from struct dev
+ * @dev: pointer to device associated with this genpd
+ *
+ * Returns device_id stored from ti,sci_id property
+ */
+static int ti_sci_dev_id(struct device *dev)
+{
+	struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
+	struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+
+	return sci_dev_data->idx;
+}
+
+/**
+ * ti_sci_dev_to_sci_handle(): get pointer to ti_sci_handle
+ * @dev: pointer to device associated with this genpd
+ *
+ * Returns ti_sci_handle to be used to communicate with system
+ *	   control processor.
+ */
+static const struct ti_sci_handle *ti_sci_dev_to_sci_handle(struct device *dev)
+{
+	struct generic_pm_domain *pd = pd_to_genpd(dev->pm_domain);
+	struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(pd);
+
+	return ti_sci_genpd->ti_sci;
+}
+
+/**
+ * ti_sci_dev_start(): genpd device start hook called to turn device on
+ * @dev: pointer to device associated with this genpd to be powered on
+ */
+static int ti_sci_dev_start(struct device *dev)
+{
+	const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
+	int idx = ti_sci_dev_id(dev);
+
+	return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
+}
+
+/**
+ * ti_sci_dev_stop(): genpd device stop hook called to turn device off
+ * @dev: pointer to device associated with this genpd to be powered off
+ */
+static int ti_sci_dev_stop(struct device *dev)
+{
+	const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
+	int idx = ti_sci_dev_id(dev);
+
+	return ti_sci->ops.dev_ops.put_device(ti_sci, idx);
+}
+
+static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
+				struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args pd_args;
+	struct ti_sci_pm_domain *ti_sci_genpd = genpd_to_ti_sci_pd(domain);
+	const struct ti_sci_handle *ti_sci = ti_sci_genpd->ti_sci;
+	struct ti_sci_genpd_dev_data *sci_dev_data;
+	struct generic_pm_domain_data *genpd_data;
+	int idx, ret = 0;
+
+	ret = of_parse_phandle_with_args(np, "power-domains",
+					 "#power-domain-cells", 0, &pd_args);
+	if (ret < 0)
+		return ret;
+
+	if (pd_args.args_count != 1)
+		return -EINVAL;
+
+	idx = pd_args.args[0];
+
+	/*
+	 * Check the validity of the requested idx, if the index is not valid
+	 * the PMMC will return a NAK here and we will not allocate it.
+	 */
+	ret = ti_sci->ops.dev_ops.is_valid(ti_sci, idx);
+	if (ret)
+		return -EINVAL;
+
+	sci_dev_data = kzalloc(sizeof(*sci_dev_data), GFP_KERNEL);
+	if (!sci_dev_data)
+		return -ENOMEM;
+
+	sci_dev_data->idx = idx;
+
+	genpd_data = dev_gpd_data(dev);
+	genpd_data->data = sci_dev_data;
+
+	return 0;
+}
+
+static void ti_sci_pd_detach_dev(struct generic_pm_domain *domain,
+				 struct device *dev)
+{
+	struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
+	struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+
+	kfree(sci_dev_data);
+	genpd_data->data = NULL;
+}
+
+static const struct of_device_id ti_sci_pm_domain_matches[] = {
+	{ .compatible = "ti,sci-pm-domain", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_pm_domain_matches);
+
+static int ti_sci_pm_domain_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct ti_sci_pm_domain *ti_sci_pd;
+	int ret;
+
+	ti_sci_pd = devm_kzalloc(dev, sizeof(*ti_sci_pd), GFP_KERNEL);
+	if (!ti_sci_pd)
+		return -ENOMEM;
+
+	ti_sci_pd->ti_sci = devm_ti_sci_get_handle(dev);
+	if (IS_ERR(ti_sci_pd->ti_sci))
+		return PTR_ERR(ti_sci_pd->ti_sci);
+
+	ti_sci_pd->dev = dev;
+
+	ti_sci_pd->pd.attach_dev = ti_sci_pd_attach_dev;
+	ti_sci_pd->pd.detach_dev = ti_sci_pd_detach_dev;
+
+	ti_sci_pd->pd.dev_ops.start = ti_sci_dev_start;
+	ti_sci_pd->pd.dev_ops.stop = ti_sci_dev_stop;
+
+	pm_genpd_init(&ti_sci_pd->pd, NULL, true);
+
+	ret = of_genpd_add_provider_simple(np, &ti_sci_pd->pd);
+
+	return ret;
+}
+
+static struct platform_driver ti_sci_pm_domains_driver = {
+	.probe = ti_sci_pm_domain_probe,
+	.driver = {
+		.name = "ti_sci_pm_domains",
+		.of_match_table = ti_sci_pm_domain_matches,
+	},
+};
+module_platform_driver(ti_sci_pm_domains_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI System Control Interface (SCI) Power Domain driver");
+MODULE_AUTHOR("Dave Gerlach");
-- 
2.11.0

[PATCH v5 5/5] ARM: keystone: Drop PM domain support for k2g

[Dave Gerlach]

K2G will use a different power domain driver than the rest of the
keystone family in order to make use of the TI SCI protocol so prevent
the standard keystone pm_domain code from registering itself in
preparation for a new driver.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 arch/arm/mach-keystone/pm_domain.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c
index 8cbb35765a19..fe57e2692629 100644
--- a/arch/arm/mach-keystone/pm_domain.c
+++ b/arch/arm/mach-keystone/pm_domain.c
@@ -32,7 +32,9 @@ static struct pm_clk_notifier_block platform_domain_notifier = {
 };
 
 static const struct of_device_id of_keystone_table[] = {
-	{.compatible = "ti,keystone"},
+	{.compatible = "ti,k2hk"},
+	{.compatible = "ti,k2e"},
+	{.compatible = "ti,k2l"},
 	{ /* end of list */ },
 };
 
-- 
2.11.0

Re: [PATCH v5 0/5] ARM: K2G: Add support for TI-SCI Generic PM Domains

[santosh.shilimkar]

On 4/3/17 7:47 PM, Dave Gerlach wrote:
> Hi,
> This is v5 of the series to add support for TI-SCI Generic PM Domains with
> all ACKs in place and ready for Santosh to merge.
>
Applied to 'for_4.12/soc-pmdomain' and should show up in next. Based on
what arm-soc folks say about the single pull request, i will follow
it up with pull request.

Regards,
Santosh