Re: [PATCH v6 0/7] Tegra264 PWM support

[Mikko Perttunen <mperttunen@nvidia.com>]

On Tuesday, July 14, 2026 6:35 PM Uwe Kleine-König wrote:
> Hello,
> 
> On Wed, Jul 01, 2026 at 12:20:29PM +0900, Mikko Perttunen wrote:
> > this adds support for the PWM controller on Tegra264. The controller
> > is similar to previous generations, but the register fields are
> > widened, the depth is made configurable, and the enable bit moves
> > to a different spot.
> > 
> > This series adds only basic support with fixed depth -- configurable
> > depth will come later.
> > 
> > Patch 1 adds device tree bindings for Tegra264 PWM (compatible
> >   string).
> > 
> > Patch 2 prefixes driver-local macros and static helpers with
> >   tegra_/TEGRA_ to make their scoping clear.
> > 
> > Patches 3 to 6 contain the PWM driver changes for Tegra264.
> > 
> > Patch 7 adds device tree nodes for the PWM controllers on Tegra264.
> 
> I'm not entirely happy with the driver (as already pointed out during
> review of earlier revisions of this series), but it's an improvement.
> 

I agree.

> I'll take a look to improve the things that annoy me in this driver and
> I didn't want to do that on the current state which would make it
> necessary to respin your changes.
> 
> So I applied patches #1 to #6 to
> 	https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git pwm/for-next
> .
> 

Thank you!

> I assume patch #7 will go via armsoc? If I should take this, too, please
> tell me.

My understanding is also that #7 will be picked up by Thierry.

Best regards
Mikko

> 
> Best regards
> Uwe