From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Frank Li <Frank.li@oss.nxp.com>
Cc: sashiko-reviews@lists.linux.dev, Frank.Li@kernel.org,
robh@kernel.org, devicetree@vger.kernel.org,
wsa+renesas@sang-engineering.com, imx@lists.linux.dev,
conor+dt@kernel.org
Subject: Re: [PATCH v6 1/1] arm64: dts: add tqma9596la-mba95xxca
Date: Wed, 01 Jul 2026 17:37:33 +0200 [thread overview]
Message-ID: <7985027.31r3eYUQgx@steina-w> (raw)
In-Reply-To: <akUsE6A6lX0mgM5g@SMW015318>
Hi, Frank,
Am Mittwoch, 1. Juli 2026, 17:02:43 CEST schrieb Frank Li:
> On Wed, Jul 01, 2026 at 10:50:11AM +0200, Alexander Stein wrote:
> > Hi,
> >
> > here some comments about the findings.
> >
> > Am Mittwoch, 1. Juli 2026, 10:45:22 CEST schrieb sashiko-bot@kernel.org:
> > > Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
> > > - [High] Hardware components (PWM fan and 10G SFP) remain permanently unpowered due to disabled regulators
> > > - [Low] Dead code: Unreferenced `pinctrl_ethphy0` node
> > > --
> > >
> > > commit f54617810555494fd6b435aa3ac070a14b264e01
> > > Author: Markus Niebel <Markus.Niebel@ew.tq-group.com>
> > >
> > > arm64: dts: add tqma9596la-mba95xxca
> > >
> > > This adds support for TQMa95xxLA modules, designed to be soldered
> > > on a carrier board. MBa95xxCA is a carrier reference board / starter kit
> > > design. Enable the external accessible PCIe controllers as host, add
> > > clocking and reset GPIO.
> > >
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596la-mba95xxca.dts b/arch/arm64/boot/dts/freescale/imx95-tqma9596la-mba95xxca.dts
> > > > new file mode 100644
> > > > index 0000000000000..e90f37bbdcd80
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596la-mba95xxca.dts
> > >
> ...
> > >
> > > > + pinctrl_ethphy0: ethphy0grp {
> > > > + fsl,pins = <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_GPIO1_IO_BIT9 0x1100>;
> > > > + };
> > >
> > > [Severity: Low]
> > > Is this pinctrl group missing a reference?
> > >
> > > It defines pin configuration for the ethphy0 IRQ pin, but doesn't seem to be
> > > referenced by the ethphy0 node (e.g., via pinctrl-0) or any other node.
> >
> > This pad is connected to gpio1 which is under control of the system manager,
> > so Cortex-A55 (Linux) has no access to it.
>
> If not one refer it, it will never be set to GPIO at all.
At on Linux side. But this pad is owned by System manager (SM) and will be
set and used there exclusively.
Best regards,
Alexander
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
prev parent reply other threads:[~2026-07-01 15:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 8:26 [PATCH v6 1/1] arm64: dts: add tqma9596la-mba95xxca Alexander Stein
2026-07-01 8:45 ` sashiko-bot
2026-07-01 8:50 ` Alexander Stein
2026-07-01 15:02 ` Frank Li
2026-07-01 15:37 ` Alexander Stein [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7985027.31r3eYUQgx@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=Frank.Li@kernel.org \
--cc=Frank.li@oss.nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox