* [PATCH v2 3/3] arm64: dts: add description for solidrun cn9130 som and clearfog boards
2024-04-04 15:35 [PATCH v2 0/3] arm64: dts: add description for solidrun cn9130 som and clearfog boards Josua Mayer
2024-04-04 15:35 ` [PATCH v2 1/3] dt-bindings: arm64: marvell: add solidrun cn9130 som based boards Josua Mayer
2024-04-04 15:35 ` [PATCH v2 2/3] dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board Josua Mayer
@ 2024-04-04 15:35 ` Josua Mayer
2024-04-05 7:05 ` Krzysztof Kozlowski
2024-04-09 13:38 ` [PATCH v2 0/3] " Rob Herring
3 siblings, 1 reply; 9+ messages in thread
From: Josua Mayer @ 2024-04-04 15:35 UTC (permalink / raw)
To: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Rob Herring
Cc: Yazan Shhady, linux-arm-kernel, devicetree, linux-kernel,
Josua Mayer
Add description for the SolidRun CN9130 SoM, and Clearfog Base / Pro
reference boards.
The SoM has been designed as a pin-compatible replacement for the older
Armada 388 based SoM. Therefore it supports the same boards and a
similar feature set.
Most notable upgrades:
- 4x Cortex-A72
- 10Gbps SFP
- Both eMMC and SD supported at the same time
The developer first supporting this product at SolidRun decided to use
different filenames for the DTBs: Armada 388 uses the full
"clearfog" string while cn9130 uses the abbreviation "cf".
This name is already hard-coded in pre-installed vendor u-boot and can
not be changed easily.
NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE:
CN9130 SoM has a different footprint from Armada 388 SoM.
Components on the carrier board below the SoM may collide causing
damage, such as on Clearfog Base.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
arch/arm64/boot/dts/marvell/Makefile | 2 +
arch/arm64/boot/dts/marvell/cn9130-cf-base.dts | 178 ++++++++++++
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts | 367 +++++++++++++++++++++++++
arch/arm64/boot/dts/marvell/cn9130-cf.dtsi | 193 +++++++++++++
arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi | 159 +++++++++++
5 files changed, 899 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 99b8cb3c49e1..019f2251d696 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -28,3 +28,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb
dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts
new file mode 100644
index 000000000000..788a5c302b17
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf-base.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Base.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+#include "cn9130-cf.dtsi"
+
+/ {
+ model = "SolidRun CN9130 Clearfog Base";
+ compatible = "solidrun,cn9130-clearfog-base",
+ "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&rear_button_pins>;
+ pinctrl-names = "default";
+
+ button-0 {
+ /* The rear SW3 button */
+ label = "Rear Button";
+ gpios = <&cp0_gpio1 31 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ rfkill-m2-gnss {
+ compatible = "rfkill-gpio";
+ label = "m.2 GNSS";
+ radio-type = "gps";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&expander0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* M.2 is B-keyed, so w-disable is for WWAN */
+ rfkill-m2-wwan {
+ compatible = "rfkill-gpio";
+ label = "m.2 WWAN";
+ radio-type = "wwan";
+ /* rfkill-gpio inverts internally */
+ shutdown-gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp0_eth1 {
+ phy = <&phy1>;
+ phys = <&cp0_comphy3 1>;
+ phy-mode = "sgmii";
+ status = "okay";
+};
+
+&cp0_eth2_phy {
+ /*
+ * Configure LEDs default behaviour:
+ * - LED[0]: link/activity: On/blink (green)
+ * - LED[1]: link is 100/1000Mbps: On (yellow)
+ * - LED[2]: high impedance (floating)
+ */
+ marvell,reg-init = <3 16 0xf000 0x0a61>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN;
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_WAN;
+ default-state = "keep";
+ };
+ };
+};
+
+&cp0_gpio1 {
+ sim-select-hog {
+ gpio-hog;
+ gpios = <27 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "sim-select";
+ };
+};
+
+&cp0_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ /*
+ * Configure LEDs default behaviour:
+ * - LED[0]: link/activity: On/blink (green)
+ * - LED[1]: link is 100/1000Mbps: On (yellow)
+ * - LED[2]: high impedance (floating)
+ *
+ * Configure LEDs electrical polarity
+ * - on-state: low
+ * - off-state: high (not hi-z, to avoid residual glow)
+ */
+ marvell,reg-init = <3 16 0xf000 0x0a61>,
+ <3 17 0x003f 0x000a>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+ };
+};
+
+&cp0_pinctrl {
+ pinctrl-0 = <&sim_select_pins>;
+ pintrl-names = "default";
+
+ rear_button_pins: cp0-rear-button-pins {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ sim_select_pins: cp0-sim-select-pins {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+};
+
+/*
+ * SRDS #4 - USB 3.0 host on M.2 connector
+ * USB-2.0 Host on Type-A connector
+ */
+&cp0_usb3_1 {
+ phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+ phy-names = "comphy", "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&expander0 {
+ m2-full-card-power-off-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "m2-full-card-power-off";
+ };
+
+ m2-reset-hog {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "m2-reset";
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts
new file mode 100644
index 000000000000..0b95d5f7acfd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Pro.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+#include "cn9130-cf.dtsi"
+
+/ {
+ model = "SolidRun CN9130 Clearfog Pro";
+ compatible = "solidrun,cn9130-clearfog-pro",
+ "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&rear_button_pins>;
+ pinctrl-names = "default";
+
+ button-0 {
+ /* The rear SW3 button */
+ label = "Rear Button";
+ gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+/* SRDS #3 - SGMII 1GE to L2 switch */
+&cp0_eth1 {
+ phys = <&cp0_comphy3 1>;
+ phy-mode = "sgmii";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&cp0_eth2_phy {
+ /*
+ * Configure LEDs default behaviour similar to switch ports:
+ * - LED[0]: link/activity: On/blink (green)
+ * - LED[1]: link is 100/1000Mbps: On (red)
+ * - LED[2]: high impedance (floating)
+ *
+ * Switch port defaults:
+ * - LED0: link/activity: On/blink (green)
+ * - LED1: link is 1000Mbps: On (red)
+ *
+ * Identical configuration is impossible with hardware offload.
+ */
+ marvell,reg-init = <3 16 0xf000 0x0a61>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN;
+ label = "LED2";
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WAN;
+ label = "LED1";
+ default-state = "keep";
+ };
+ };
+};
+
+&cp0_mdio {
+ ethernet-switch@4 {
+ compatible = "marvell,mv88e6085";
+ reg = <4>;
+ pinctrl-0 = <&dsa_clk_pins &dsa_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&cp0_gpio1>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-port@0 {
+ reg = <0>;
+ label = "lan5";
+ phy = <&switch0phy0>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ label = "LED12";
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_LAN;
+ label = "LED11";
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-port@1 {
+ reg = <1>;
+ label = "lan4";
+ phy = <&switch0phy1>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ label = "LED10";
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_LAN;
+ label = "LED9";
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy = <&switch0phy2>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ label = "LED8";
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_LAN;
+ label = "LED7";
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-port@3 {
+ reg = <3>;
+ label = "lan2";
+ phy = <&switch0phy3>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ label = "LED6";
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_LAN;
+ label = "LED5";
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy = <&switch0phy4>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ label = "LED4";
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_LAN;
+ label = "LED3";
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&cp0_eth1>;
+ phy-mode = "sgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ ethernet-port@6 {
+ reg = <6>;
+ label = "lan6";
+ phy-mode = "rgmii";
+
+ /*
+ * Because of mdio address conflict the
+ * external phy is not readable.
+ * Force a fixed link instead.
+ */
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ switch0phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ /*
+ * Indirectly configure default behaviour
+ * for port lan6 leds behind external phy.
+ * Internal PHYs are not using page 3,
+ * therefore writing to it is safe.
+ */
+ marvell,reg-init = <3 16 0xf000 0x0a61>;
+ };
+
+ switch0phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ switch0phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ switch0phy4: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ };
+
+ /*
+ * There is an external phy on the switch mdio bus.
+ * Because its mdio address collides with internal phys,
+ * it is not readable.
+ *
+ * mdio-external {
+ * compatible = "marvell,mv88e6xxx-mdio-external";
+ * #address-cells = <1>;
+ * #size-cells = <0>;
+ *
+ * ethernet-phy@1 {
+ * reg = <0x1>;
+ * };
+ * };
+ */
+ };
+};
+
+/* SRDS #4 - miniPCIe (CON2) */
+&cp0_pcie1 {
+ num-lanes = <1>;
+ phys = <&cp0_comphy4 1>;
+ /* dw-pcie inverts internally */
+ reset-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ dsa_clk_pins: cp0-dsa-clk-pins {
+ marvell,pins = "mpp40";
+ marvell,function = "synce1";
+ };
+
+ dsa_pins: cp0-dsa-pins {
+ marvell,pins = "mpp27", "mpp29";
+ marvell,function = "gpio";
+ };
+
+ rear_button_pins: cp0-rear-button-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+};
+
+/*
+ * USB-2.0 Host on Type-A connector
+ */
+&cp0_usb3_1 {
+ phys = <&cp0_utmi1>;
+ phy-names = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&expander0 {
+ /* CON2 */
+ pcie1-0-clkreq-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie1.0-clkreq";
+ };
+
+ /* CON2 */
+ pcie1-0-w-disable-hog {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie1.0-w-disable";
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
new file mode 100644
index 000000000000..53aedddf0e26
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for common base of SolidRun CN9130 Clearfog Base and Pro.
+ *
+ */
+
+/ {
+ aliases {
+ i2c1 = &cp0_i2c1;
+ mmc1 = &cp0_sdhci0;
+ };
+
+ reg_usb3_vbus0: regulator-usb3-vbus0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&expander0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp0_i2c1>;
+ los-gpios = <&expander0 12 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&expander0 15 GPIO_ACTIVE_LOW>;
+ tx-disable-gpios = <&expander0 14 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&expander0 13 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <2000>;
+ };
+};
+
+/* SRDS #2 - SFP+ 10GE */
+&cp0_eth0 {
+ managed = "in-band-status";
+ phys = <&cp0_comphy2 0>;
+ phy-mode = "10gbase-r";
+ sfp = <&sfp>;
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ expander0: gpio-expander@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-0 = <&expander0_pins>;
+ pinctrl-names = "default";
+ interrupt-parent = <&cp0_gpio1>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+ /* CON3 */
+ pcie2-0-clkreq-hog {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie2.0-clkreq";
+ };
+
+ /* CON3 */
+ pcie2-0-w-disable-hog {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie2.0-w-disable";
+ };
+
+ usb3-ilimit-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "usb3-current-limit";
+ };
+
+ m2-devslp-hog {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "m.2 devslp";
+ };
+ };
+
+ /* The MCP3021 supports standard and fast modes */
+ adc@4c {
+ compatible = "microchip,mcp3021";
+ reg = <0x4c>;
+ };
+
+ carrier_eeprom: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <8>;
+ };
+};
+
+&cp0_i2c1 {
+ /*
+ * Routed to SFP, M.2, mikrobus, and miniPCIe
+ * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
+ * address pins tied low, which takes addresses 0x50 and 0x51.
+ * Mikrobus doesn't specify beyond an I2C bus being present.
+ * PCIe uses ARP to assign addresses, or 0x63-0x64.
+ */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+/* SRDS #5 - miniPCIe (CON3) */
+&cp0_pcie2 {
+ num-lanes = <1>;
+ phys = <&cp0_comphy5 2>;
+ /* dw-pcie inverts internally */
+ reset-gpios = <&expander0 1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ cp0_i2c1_pins: cp0-i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+
+ cp0_mmc0_pins: cp0-mmc0-pins {
+ marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58",
+ "mpp59", "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+
+ mikro_spi_pins: cp0-spi1-cs1-pins {
+ marvell,pins = "mpp12";
+ marvell,function = "spi1";
+ };
+
+ mikro_uart_pins: cp0-uart-pins {
+ marvell,pins = "mpp2", "mpp3";
+ marvell,function = "uart1";
+ };
+
+ expander0_pins: cp0-expander0-pins {
+ marvell,pins = "mpp4";
+ marvell,function = "gpio";
+ };
+};
+
+/* SRDS #0 - SATA on M.2 connector */
+&cp0_sata0 {
+ phys = <&cp0_comphy0 1>;
+ status = "okay";
+
+ /* only port 1 is available */
+ /delete-node/ sata-port@0;
+};
+
+/* microSD */
+&cp0_sdhci0 {
+ pinctrl-0 = <&cp0_mmc0_pins>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&cp0_spi1 {
+ /* CS1 for mikrobus */
+ pinctrl-0 = <&cp0_spi1_pins &mikro_spi_pins>;
+};
+
+/*
+ * SRDS #1 - 3.0 Host on Type-A connector
+ * USB-2.0 Host on mPCI-e connector (CON3)
+ */
+&cp0_usb3_0 {
+ phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+ phy-names = "comphy", "utmi";
+ vbus-supply = <®_usb3_vbus0>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&cp0_utmi {
+ status = "okay";
+};
+
+/* mikrobus uart */
+&cp0_uart0 {
+ pinctrl-0 = <&mikro_uart_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
new file mode 100644
index 000000000000..ec08066fb6e8
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "SolidRun CN9130 SoM";
+ compatible = "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+ aliases {
+ /* label nics like armada-388 som */
+ ethernet0 = &cp0_eth2;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth0;
+ i2c0 = &cp0_i2c0;
+ mmc0 = &ap_sdhci0;
+ rtc0 = &cp0_rtc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ v_1_8: regulator-1-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ /* requires assembly of R9307 */
+ vhv: regulator-vhv-1-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vhv-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ pinctrl-0 = <&cp0_reg_vhv_pins>;
+ pinctrl-names = "default";
+ gpio = <&cp0_gpio2 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ap_pinctrl {
+ ap_mmc0_pins: ap-mmc0-pins {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12";
+ marvell,function = "sdio";
+ /*
+ * mpp12 is emmc reset, function should be sdio (hw_rst),
+ * but pinctrl-mvebu does not support this.
+ *
+ * From pinctrl-mvebu.h:
+ * "The name will be used to switch to this setting in DT description, e.g.
+ * marvell,function = "uart2". subname is only for debugging purposes."
+ */
+ };
+};
+
+&ap_sdhci0 {
+ bus-width = <8>;
+ pinctrl-0 = <&ap_mmc0_pins>;
+ pinctrl-names = "default";
+ vqmmc-supply = <&v_1_8>;
+ status = "okay";
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* for assembly with phy */
+&cp0_eth2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_eth2_pins>;
+ phy-mode = "rgmii-id";
+ phy = <&cp0_eth2_phy>;
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ som_eeprom: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <8>;
+ };
+};
+
+&cp0_mdio {
+ status = "okay";
+ pinctrl-0 = <&cp0_mdio_pins>;
+
+ /* assembly option */
+ cp0_eth2_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cp0_spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi1_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_eth2_pins: cp0-ge2-rgmii-pins {
+ marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47",
+ "mpp48", "mpp49", "mpp50", "mpp51",
+ "mpp52", "mpp53", "mpp54", "mpp55";
+ /* docs call it "ge2", but cp110-pinctrl "ge1" */
+ marvell,function = "ge1";
+ };
+
+ cp0_i2c0_pins: cp0-i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+
+ cp0_mdio_pins: cp0-mdio-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "ge";
+ };
+
+ cp0_spi1_pins: cp0-spi1-pins {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+
+ cp0_reg_vhv_pins: cp0-reg-vhv-pins {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ };
+};
+
+/* AP default console */
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.35.3
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v2 0/3] arm64: dts: add description for solidrun cn9130 som and clearfog boards
2024-04-04 15:35 [PATCH v2 0/3] arm64: dts: add description for solidrun cn9130 som and clearfog boards Josua Mayer
` (2 preceding siblings ...)
2024-04-04 15:35 ` [PATCH v2 3/3] arm64: dts: add description for solidrun cn9130 som and clearfog boards Josua Mayer
@ 2024-04-09 13:38 ` Rob Herring
3 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2024-04-09 13:38 UTC (permalink / raw)
To: Josua Mayer
Cc: Conor Dooley, Andrew Lunn, Gregory Clement, Krzysztof Kozlowski,
devicetree, Rob Herring, Yazan Shhady, Sebastian Hesselbarth,
linux-kernel, linux-arm-kernel
On Thu, 04 Apr 2024 17:35:04 +0200, Josua Mayer wrote:
> SolidRun CN9130 SoM is a mostly pin-comptible replacement for Armada 388
> SoM used in Clearfog and Clearfog Pro boards.
>
> 1. Add new binding for compatible strings closely matching the original.
>
> 2. Add device-tree includes for SoM and carrier shared design.
>
> 3. Add device-tree for both Clearfog Base and Pro.
>
> While dtbs_check is happy with LED descriptions behind dsa switch,
> functionally they require supporting code by Andrew Lunn:
> https://lore.kernel.org/r/20240401-v6-8-0-net-next-mv88e6xxx-leds-v4-v3-0-221b3fa55f78@lunn.ch
>
> NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE:
> CN9130 SoM has a different footprint from Armada 388 SoM.
> Components on the carrier board below the SoM may collide causing
> damage, such as on Clearfog Base.
>
> Signed-off-by: Josua Mayer <josua@solid-run.com>
> ---
> Changes in v2:
> - rewrote dt bindings dropping unnecessary compatibles
> (Reported-By: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>)
> - added bindings for two additional boards (cn9131/9132)
> support planned for the coming weeks, mostly serves
> illustrational purposes, to understand cn913x variants
> - cf-pro: add description for LEDs behind DSA switch
> - cf-base: add description for LEDs behind PHYs
> (Reported-By: Andrew Lunn <andrew@lunn.ch>)
> - Link to v1: https://lore.kernel.org/r/20240321-cn9130-som-v1-0-711127a409ae@solid-run.com
>
> ---
> Josua Mayer (3):
> dt-bindings: arm64: marvell: add solidrun cn9130 som based boards
> dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
> arm64: dts: add description for solidrun cn9130 som and clearfog boards
>
> .../bindings/arm/marvell/armada-7k-8k.yaml | 18 +
> arch/arm64/boot/dts/marvell/Makefile | 2 +
> arch/arm64/boot/dts/marvell/cn9130-cf-base.dts | 178 ++++++++++
> arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts | 367 +++++++++++++++++++++
> arch/arm64/boot/dts/marvell/cn9130-cf.dtsi | 193 +++++++++++
> arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi | 159 +++++++++
> 6 files changed, 917 insertions(+)
> ---
> base-commit: 4cece764965020c22cff7665b18a012006359095
> change-id: 20240318-cn9130-som-848e86acb0ac
>
> Sincerely,
> --
> Josua Mayer <josua@solid-run.com>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y marvell/cn9130-cf-base.dtb marvell/cn9130-cf-pro.dtb' for 20240404-cn9130-som-v2-0-3af2229c7d2d@solid-run.com:
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: ap807: $nodename:0: 'ap807' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: config-space@f0000000: $nodename:0: 'config-space@f0000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: config-space@f0000000: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 13, 3848], [1, 14, 3848], [1, 11, 3848], [1, 10, 3848]]} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: config-space@f0000000: pmu: {'compatible': ['arm,cortex-a72-pmu'], 'interrupt-parent': [[2]], 'interrupts': [[17]]} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/odmi@300000: failed to match any schema with compatible: ['marvell,odmi-controller']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/gicp@3f0040: failed to match any schema with compatible: ['marvell,ap806-gicp']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0100: failed to match any schema with compatible: ['marvell,armada-8k-pic']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0200: failed to match any schema with compatible: ['marvell,ap806-sei']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/spi@510600: failed to match any schema with compatible: ['marvell,armada-380-spi']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: mmc@6e0000: clocks: [[4, 4]] is too short
from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: mmc@6e0000: clock-names: ['core'] is too short
from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: mmc@6e0000: Unevaluated properties are not allowed ('dma-coherent' was unexpected)
from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@6f4000: compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/system-controller@6f4000/pinctrl: failed to match any schema with compatible: ['marvell,ap806-pinctrl']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: gpio@1040: Unevaluated properties are not allowed ('gpio-ranges' was unexpected)
from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/system-controller@6f4000/clock: failed to match any schema with compatible: ['marvell,ap807-clock']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@6f8000: compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/system-controller@6f8000/thermal-sensor@80: failed to match any schema with compatible: ['marvell,armada-ap807-thermal']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /ap807/config-space@f0000000/system-controller@6f8000/clock-cpu: failed to match any schema with compatible: ['marvell,ap807-cpu-clock']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: cp0: $nodename:0: 'cp0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: config-space@f2000000: $nodename:0: 'config-space@f2000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/phy@120000: failed to match any schema with compatible: ['marvell,comphy-cp110']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000: failed to match any schema with compatible: ['marvell,cp110-icu']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@10: failed to match any schema with compatible: ['marvell,cp110-icu-nsr']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@50: failed to match any schema with compatible: ['marvell,cp110-icu-sei']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@440000: compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/system-controller@440000/clock: failed to match any schema with compatible: ['marvell,cp110-clock']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: gpio@100: Unevaluated properties are not allowed ('gpio-ranges', 'sim-select-hog' were unexpected)
from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: ap807: $nodename:0: 'ap807' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: gpio@140: Unevaluated properties are not allowed ('gpio-ranges' was unexpected)
from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: config-space@f0000000: $nodename:0: 'config-space@f0000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: config-space@f0000000: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 13, 3848], [1, 14, 3848], [1, 11, 3848], [1, 10, 3848]]} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: config-space@f0000000: pmu: {'compatible': ['arm,cortex-a72-pmu'], 'interrupt-parent': [[2]], 'interrupts': [[17]]} should not be valid under {'type': 'object'}
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/system-controller@440000/pinctrl: failed to match any schema with compatible: ['marvell,cp115-standalone-pinctrl']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@400000: compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/system-controller@400000/thermal-sensor@70: failed to match any schema with compatible: ['marvell,armada-cp110-thermal']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: usb@500000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode', 'vbus-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: usb@510000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: sata@540000: sata-port@1: 'anyOf' conditional failed, one must be fixed:
'phys' is a required property
'target-supply' is a required property
from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/spi@700600: failed to match any schema with compatible: ['marvell,armada-380-spi']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/spi@700680: failed to match any schema with compatible: ['marvell,armada-380-spi']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/odmi@300000: failed to match any schema with compatible: ['marvell,odmi-controller']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/gicp@3f0040: failed to match any schema with compatible: ['marvell,ap806-gicp']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0100: failed to match any schema with compatible: ['marvell,armada-8k-pic']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/config-space@f2000000/trng@760000: failed to match any schema with compatible: ['marvell,armada-8k-rng', 'inside-secure,safexcel-eip76']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: mmc@780000: Unevaluated properties are not allowed ('dma-coherent' was unexpected)
from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: crypto@800000: 'dma-coherent' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/interrupt-controller@3f0200: failed to match any schema with compatible: ['marvell,ap806-sei']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/pcie@f2600000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@400000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/pcie@f2620000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /cp0/pcie@f2640000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@420000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@440000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/xor@460000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/spi@510600: failed to match any schema with compatible: ['marvell,armada-380-spi']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: mmc@6e0000: clocks: [[4, 4]] is too short
from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: mmc@6e0000: clock-names: ['core'] is too short
from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: mmc@6e0000: Unevaluated properties are not allowed ('dma-coherent' was unexpected)
from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: system-controller@6f4000: compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/system-controller@6f4000/pinctrl: failed to match any schema with compatible: ['marvell,ap806-pinctrl']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: gpio@1040: Unevaluated properties are not allowed ('gpio-ranges' was unexpected)
from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/system-controller@6f4000/clock: failed to match any schema with compatible: ['marvell,ap807-clock']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: system-controller@6f8000: compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/system-controller@6f8000/thermal-sensor@80: failed to match any schema with compatible: ['marvell,armada-ap807-thermal']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /ap807/config-space@f0000000/system-controller@6f8000/clock-cpu: failed to match any schema with compatible: ['marvell,ap807-cpu-clock']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: cp0: $nodename:0: 'cp0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: config-space@f2000000: $nodename:0: 'config-space@f2000000' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/phy@120000: failed to match any schema with compatible: ['marvell,comphy-cp110']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000: failed to match any schema with compatible: ['marvell,cp110-icu']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@10: failed to match any schema with compatible: ['marvell,cp110-icu-nsr']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/interrupt-controller@1e0000/interrupt-controller@50: failed to match any schema with compatible: ['marvell,cp110-icu-sei']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: system-controller@440000: compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/system-controller@440000/clock: failed to match any schema with compatible: ['marvell,cp110-clock']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: gpio@100: Unevaluated properties are not allowed ('gpio-ranges' was unexpected)
from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: gpio@140: Unevaluated properties are not allowed ('gpio-ranges' was unexpected)
from schema $id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/system-controller@440000/pinctrl: failed to match any schema with compatible: ['marvell,cp115-standalone-pinctrl']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: system-controller@400000: compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/system-controller@400000/thermal-sensor@70: failed to match any schema with compatible: ['marvell,armada-cp110-thermal']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: usb@500000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode', 'vbus-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: usb@510000: Unevaluated properties are not allowed ('dma-coherent', 'dr_mode' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: sata@540000: sata-port@1: 'anyOf' conditional failed, one must be fixed:
'phys' is a required property
'target-supply' is a required property
from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/xor@6a0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/xor@6c0000: failed to match any schema with compatible: ['marvell,armada-7k-xor', 'marvell,xor-v2']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/spi@700600: failed to match any schema with compatible: ['marvell,armada-380-spi']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/spi@700680: failed to match any schema with compatible: ['marvell,armada-380-spi']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/config-space@f2000000/trng@760000: failed to match any schema with compatible: ['marvell,armada-8k-rng', 'inside-secure,safexcel-eip76']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: mmc@780000: Unevaluated properties are not allowed ('dma-coherent' was unexpected)
from schema $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: crypto@800000: 'dma-coherent' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/pcie@f2600000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/pcie@f2620000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie']
arch/arm64/boot/dts/marvell/cn9130-cf-pro.dtb: /cp0/pcie@f2640000: failed to match any schema with compatible: ['marvell,armada8k-pcie', 'snps,dw-pcie']
^ permalink raw reply [flat|nested] 9+ messages in thread