Re: [PATCH v8 00/18] media: iris: Add AR50LT core support and enable Agatti platform

[Bryan O'Donoghue <bod@kernel.org>]

On 30/07/2026 16:20, Dmitry Baryshkov wrote:
> This series adds support for the AR50Lt VPU core to the iris driver and
> enables the Agatti SoC to use Gen2 firmware and HFI.
> 
> AR50Lt introduces a few platform-specific requirements that need to be
> handled in the iris core and VPU abstraction layer. To accommodate
> this, the series adds minimal hooks and updates needed to allow the
> firmware to operate correctly on AR50Lt without impacting existing
> supported platforms.
> 
> Additionally, the series wires up Agatti to use the Gen2 firmware and
> HFI path, aligning it with newer generations of supported Qualcomm
> video hardware.
can't apply

b4 shazam 20260730-iris-ar50lt-v8-1-6597c08cea6f@oss.qualcomm.com
Looking up 
https://lore.kernel.org/all/20260730-iris-ar50lt-v8-1-6597c08cea6f@oss.qualcomm.com/
Grabbing thread from 
lore.kernel.org/all/20260730-iris-ar50lt-v8-1-6597c08cea6f@oss.qualcomm.com/t.mbox.gz
Checking for newer revisions
Grabbing search results from lore.kernel.org
Analyzing 31 messages in the thread
Analyzing 225 code-review messages
Checking attestation on all messages, may take a moment...
---
   ✓ [PATCH v8 1/18] media: iris: Add Gen2 firmware autodetect and fallback
     + Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> (✓ 
DKIM/kernel.org)
   ✓ [PATCH v8 2/18] media: iris: Skip UBWC configuration when not supported
   ✓ [PATCH v8 3/18] media: iris: drop IRIS_FMT_foo enumeration
   ✓ [PATCH v8 4/18] media: iris: Filter UBWC raw formats based on 
hardware capabilities
   ✓ [PATCH v8 5/18] media: iris: Introduce set_preset_register as a vpu_op
   ✓ [PATCH v8 6/18] media: iris: Introduce interrupt_init as a vpu_op
   ✓ [PATCH v8 7/18] media: iris: add vpu op hook to disable ARP buffer
   ✓ [PATCH v8 8/18] media: iris: Add platform data field for watchdog 
interrupt mask
   ✓ [PATCH v8 9/18] media: iris: Add platform flag for instantaneous 
bandwidth voting
   ✓ [PATCH v8 10/18] media: iris: skip PIPE if it is not supported by 
the platform
   ✓ [PATCH v8 11/18] media: iris: Add framework support for AR50_LITE 
video core
   ✓ [PATCH v8 12/18] media: iris: add minimal GET_PROPERTY implementation
   ✓ [PATCH v8 13/18] media: iris: update buffer requirements based on 
received info
   ✓ [PATCH v8 14/18] media: iris: implement support for the Agatti platform
   ✓ [PATCH v8 15/18] media: iris: Introduce buffer size calculations 
for AR50LT
   ✓ [PATCH v8 16/18] media: iris: add Gen2 firmware support on the 
Agatti platform
   ✓ [PATCH v8 17/18] media: venus: skip QCM2290 if Iris driver is enabled
   ✓ [PATCH v8 18/18] media: iris: constify inst_fw_cap_sm8250_dec
   ---
   ✓ Signed: openpgp/dbaryshkov@gmail.com (From: 
dmitry.baryshkov@oss.qualcomm.com)
   ✓ Signed: DKIM/oss.qualcomm.com
---
Total patches: 18
---
Applying: media: iris: Add Gen2 firmware autodetect and fallback
Patch failed at 0001 media: iris: Add Gen2 firmware autodetect and fallback
error: patch failed: drivers/media/platform/qcom/iris/iris_firmware.c:14
error: drivers/media/platform/qcom/iris/iris_firmware.c: patch does not 
apply
error: patch failed: 
drivers/media/platform/qcom/iris/iris_platform_common.h:289
error: drivers/media/platform/qcom/iris/iris_platform_common.h: patch 
does not apply
error: patch failed: 
drivers/media/platform/qcom/iris/iris_platform_vpu2.c:22
error: drivers/media/platform/qcom/iris/iris_platform_vpu2.c: patch does 
not apply
error: patch failed: 
drivers/media/platform/qcom/iris/iris_platform_vpu3x.c:90
error: drivers/media/platform/qcom/iris/iris_platform_vpu3x.c: patch 
does not apply
error: patch failed: drivers/media/platform/qcom/iris/iris_probe.c:251
error: drivers/media/platform/qcom/iris/iris_probe.c: patch does not apply
error: patch failed: drivers/media/platform/qcom/iris/iris_vidc.c:9
error: drivers/media/platform/qcom/iris/iris_vidc.c: patch does not apply
hint: Use 'git am --show-current-patch=diff' to see the failed patch
hint: When you have resolved this problem, run "git am --continue".
hint: If you prefer to skip this patch, run "git am --skip" instead.
hint: To restore the original branch and stop patching, run "git am 
--abort".
hint: Disable this message with "git config set advice.mergeConflict false"