messages from 2026-07-18 01:46:35 to 2026-07-18 11:18:09 UTC [more...]
[RFC PATCH 0/2] drm/meson: add HDMI support for GXLX2
2026-07-18 11:15 UTC (3+ messages)
` [RFC PATCH 1/2] dt-bindings: display: meson-dw-hdmi: add GXLX2 compatible
` [RFC PATCH 2/2] drm/meson: add GXLX2 HDMI register support
[PATCH v7 0/2] Subject: Add Lontium LT9611C(EX/UXD) MIPI DSI to HDMI driver
2026-07-18 11:12 UTC (4+ messages)
` [PATCH v7 2/2] drm/bridge: Add Lontium LT9609C(EX/UXD) "
[PATCH v3 0/4] media: synopsys: hdmirx: add HDMI audio capture support
2026-07-18 11:12 UTC (10+ messages)
` [PATCH v3 1/4] dt-bindings: media: snps,dw-hdmi-rx: add #sound-dai-cells
` [PATCH v3 2/4] media: synopsys: hdmirx: add HDMI audio capture support
` [PATCH v3 3/4] arm64: dts: rockchip: add #sound-dai-cells to the RK3588 HDMI receiver
` [PATCH v3 4/4] arm64: dts: rockchip: enable HDMI RX audio capture on Orange Pi 5 Plus
[PATCH v2 6/6] arm64: dts: qcom: qcs6490-rubikpi3: Add audio support
2026-07-18 9:41 UTC (2+ messages)
[PATCH net-next v9 00/12] net: pcs: Introduce support for fwnode PCS
2026-07-18 9:01 UTC (21+ messages)
` [PATCH net-next v9 01/12] net: phylink: keep and use MAC supported_interfaces in phylink struct
` [PATCH net-next v9 02/12] net: phylink: introduce internal phylink PCS handling
` [PATCH net-next v9 03/12] net: phylink: add phylink_release_pcs() to externally release a PCS
` [PATCH net-next v9 04/12] net: pcs: implement Firmware node support for PCS driver
` [PATCH net-next v9 05/12] net: phylink: support late PCS provider attach
` [PATCH net-next v9 06/12] net: Document PCS subsystem
` [PATCH net-next v9 08/12] of: property: fw_devlink: Add support for "pcs-handle"
` [PATCH net-next v9 09/12] net: phylink: add .pcs_link_down PCS OP
` [PATCH net-next v9 11/12] net: pcs: airoha: add PCS driver for Airoha AN7581 SoC
` [PATCH net-next v9 12/12] net: airoha: add phylink support
[PATCH 0/6] Add support for Broadcom BCM2712 IOMMU driver (Raspberry Pi 5)
2026-07-18 8:39 UTC (4+ messages)
` [PATCH 5/6] iommu: Add Broadcom BCM2712 IOMMU driver
[PATCH v10 0/2] iio: health: add MAX86150 ECG and PPG biosensor driver
2026-07-18 8:36 UTC (5+ messages)
` [PATCH v10 2/2] "
[PATCH] dt-bindings: leds: lacie,ns2-leds: Convert to DT schema
2026-07-18 8:15 UTC (4+ messages)
[PATCH v7 00/13] ZTE zx297520v3 clock bindings and driver
2026-07-18 7:50 UTC (4+ messages)
` [PATCH v7 01/13] dt-bindings: phy: Add zx297520v3 USB phy documentation
[RFC PATCH v2 0/8] accel/rocket: RK3576 NPU (RKNN) enablement
2026-07-18 7:49 UTC (18+ messages)
` [RFC PATCH v2 1/8] dt-bindings: npu: rockchip: add rockchip,rk3576-rknn-core
` [RFC PATCH v2 2/8] pmdomain/rockchip: add optional per-domain power-on settle delay
` [RFC PATCH v2 3/8] pmdomain/rockchip: cycle optional power-domain resets on power-on
` [RFC PATCH v2 4/8] iommu/rockchip: take all DT clocks
` [RFC PATCH v2 5/8] iommu/rockchip: clear stale page faults before enabling stall
` [RFC PATCH v2 6/8] accel/rocket: add RK3576 NPU (RKNN) support
` [RFC PATCH v2 7/8] arm64: dts: rockchip: rk3576: add NPU (RKNN) nodes
` [RFC PATCH v2 8/8] arm64: dts: rockchip: rk3576-rock-4d: enable NPU
[PATCH v2 0/2] Add support for Vicharak Vaaman board
2026-07-18 7:47 UTC (5+ messages)
` [PATCH v2 1/2] dt-bindings: arm: rockchip: Add "
` [PATCH v2 2/2] arm64: dts: "
[PATCH] dt-bindings: sram: Document qcom,shikra-imem compatible
2026-07-18 6:47 UTC (4+ messages)
[PATCH v10 0/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI DPHY driver
2026-07-18 3:33 UTC (5+ messages)
` [PATCH v10 1/2] dt-bindings: phy: qcom: Add CSI2 C-PHY/DPHY schema
` [PATCH v10 2/2] phy: qcom-mipi-csi2: Add a CSI2 MIPI DPHY driver
[PATCH v28 0/7] firmware: imx: driver for NXP secure-enclave
2026-07-18 3:04 UTC (5+ messages)
` [PATCH v28 3/7] firmware: imx: add driver for NXP EdgeLock Enclave
[PATCH v7 0/4] iio: adc: Add support for LTC2378 and similar ADCs
2026-07-18 1:51 UTC (6+ messages)
` [PATCH v7 2/4] iio: adc: ltc2378: Add support for LTC2378-20 "
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox