messages from 2026-10-24 21:44:42 to 2026-10-25 20:25:07 UTC [more...]
[PATCH 00/11] media: amlogic: vdec: S4 decoding beyond H.264 Baseline
2026-10-25 20:25 UTC (15+ messages)
` [PATCH 01/11] MAINTAINERS: fix the Amlogic VDEC binding path
` [PATCH 02/11] dt-bindings: media: amlogic,s4-vdec: describe both decoder cores
` [PATCH 03/11] media: amlogic: vdec: fix the microcode loading and prepare the HEVC core
` [PATCH 04/11] media: amlogic: vdec: h264: decode Main and High profile bit-exact
` [PATCH 05/11] media: amlogic: vdec: add MPEG-1/2 decoding
` [PATCH 06/11] media: amlogic: vdec: add MJPEG decoding
` [PATCH 07/11] media: amlogic: vdec: add AV1 decoding on the HEVC core
` [PATCH 08/11] media: amlogic: vdec: add VP9 "
` [PATCH 09/11] media: amlogic: vdec: add HEVC "
` [PATCH 10/11] media: amlogic: vdec: add MPEG-4 Part 2 decoding
` [PATCH 11/11] media: amlogic: vdec: give the regmaps their own names
[PATCH v2 0/6] iio: adc: ti-ads1298: fixes, and ADS1299 support
2026-10-25 20:18 UTC (10+ messages)
` [PATCH v2 1/6] iio: adc: ti-ads1298: fix the data read path
` [PATCH v2 2/6] iio: adc: ti-ads1298: fix power-up and clock handling
` [PATCH v2 3/6] iio: adc: ti-ads1298: fix scale, ID check, regmap and Kconfig
` [PATCH v2 4/6] iio: adc: ti-ads1298: prepare for more chip families
` [PATCH v2 5/6] dt-bindings: iio: adc: ti,ads1298: add ADS1299
` [PATCH v2 6/6] iio: adc: ti-ads1298: add ADS1299 support
[PATCH v2 0/4] mmc: sdhci-cadence: SD6HC DDR50/DDR52 read-path tuning and fixes
2026-10-25 20:17 UTC (3+ messages)
` [PATCH v2 1/4] mmc: sdhci-cadence: add PHY settle after tuning for SD6HC
[PATCH 0/7] Bluetooth: make the Amlogic W1 (W155S2) usable
2026-10-25 20:16 UTC (10+ messages)
` [PATCH 1/7] Bluetooth: add a quirk for controllers that cannot enable Secure Connections
` [PATCH 2/7] Bluetooth: add a quirk for controllers that hang on Write Current IAC LAP
` [PATCH 3/7] Bluetooth: hci_aml: cope with a controller that is already running
` [PATCH 4/7] dt-bindings: net: bluetooth: amlogic,w155s2-bt: allow local-bd-address
` [PATCH 5/7] Bluetooth: hci_aml: take the address from the firmware description
` [PATCH 6/7] dt-bindings: net: bluetooth: amlogic,w155s2-bt: add amlogic,shared-antenna
` [PATCH 7/7] Bluetooth: hci_aml: configure the RF for a shared antenna
[PATCH 0/2] firmware: meson: sm: make power-off work on S4
2026-10-25 20:01 UTC (4+ messages)
` [PATCH 1/2] dt-bindings: firmware: amlogic,meson-gxbb-sm: add amlogic,meson-s4-sm
` [PATCH 2/2] firmware: meson: sm: make power-off work on S4
[PATCH 0/3] thermal/drivers/amlogic: add S4 support
2026-10-25 19:43 UTC (6+ messages)
` [PATCH 1/3] dt-bindings: thermal: amlogic: add the S4 CPU sensor
` [PATCH 2/3] thermal/drivers/amlogic: add S4 support
` [PATCH 3/3] thermal/drivers/amlogic: do not log the secure monitor deferral as an error
[PATCH 0/4] clk / clocksource: Add Ingenic X1600 SoC support
2026-10-25 19:36 UTC (6+ messages)
` [PATCH 1/4] dt-bindings: clock: Add Ingenic X1600 CGU bindings
` [PATCH 2/4] clk: ingenic: Add Ingenic X1600 CGU clock driver support
` [PATCH 3/4] clk: ingenic: jz4760-cgu: Adapt calc_m_n_od() to core framework changes
` [PATCH 4/4] clk: ingenic: x1000-cgu: "
[PATCH v7 0/7] Add support for S4 audio
2026-10-25 19:24 UTC (8+ messages)
` [PATCH v7 1/7] dt-bindings: clock: meson: Add audio power domain for S4 soc
` [PATCH v7 2/7] dt-bindings: Asoc: axg-audio: Add S4 audio tocodec
` [PATCH v7 3/7] ASoC: meson: g12a-toacodec: Add S4 tocodec driver
` [PATCH v7 4/7] clk: meson: axg_audio: add S4 support
` [PATCH v7 5/7] ASoC: dt-bindings: amlogic,g12a-tohdmitx: add S4 compatible
` [PATCH v7 6/7] ASoC: meson: g12a-toacodec: fix the S4 source mux read-back
` [PATCH v7 7/7] ASoC: meson: g12a-tohdmitx: add S4 support
[PATCH 0/2] media: rc: meson-ir: wake the system from the remote
2026-10-25 19:23 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: media: amlogic,meson6-ir: allow wakeup-source
` [PATCH 2/2] media: rc: meson-ir: allow the receiver to wake the system
[PATCH] dt-bindings: media: amlogic,axg-ge2d: add S4 support
2026-10-25 19:23 UTC
[PATCH 0/4] arm64: amlogic: S4 CPU frequency scaling
2026-10-25 19:22 UTC (5+ messages)
` [PATCH 1/4] dt-bindings: clock: amlogic,s4-pll-clkc: add the CPU clock
` [PATCH 2/4] clk: meson: s4-pll: "
` [PATCH 3/4] firmware: meson: sm: add the CPU speed bin call
` [PATCH 4/4] cpufreq: add an Amlogic speed-bin driver
[PATCH 0/2] phy: amlogic: meson-g12a-usb2: add S4 support
2026-10-25 19:22 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: phy: amlogic,g12a-usb2-phy: add S4 compatible
` [PATCH 2/2] phy: amlogic: meson-g12a-usb2: add S4 support
[PATCH 0/2] mmc: meson-gx: make the core clock phase configurable
2026-10-25 19:20 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: mmc: amlogic,meson-gx-mmc: add amlogic,core-phase-degrees
` [PATCH 2/2] mmc: meson-gx: allow the core clock phase to be set from DT
[PATCH v2 0/5] drm/ingenic: Add the X1600 LCD controller and the HiBy R1 panel
2026-10-25 19:16 UTC (6+ messages)
` [PATCH v2 1/5] dt-bindings: vendor-prefixes: Add HiBy
` [PATCH v2 2/5] dt-bindings: display: Add the Ingenic X1600 LCD controller
` [PATCH v2 3/5] drm/ingenic: Add a driver for the "
` [PATCH v2 4/5] dt-bindings: display: panel: Add the HiBy LG35583
` [PATCH v2 5/5] drm/panel: "
[PATCH v2 0/2] pwm: Add the Ingenic X1600 PWM controller
2026-10-25 19:16 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: "
` [PATCH v2 2/2] pwm: Add a driver for "
[PATCH] of: overlay: fix device_node leak when attaching node to changeset fails
2026-10-25 18:02 UTC
[PATCH v4 0/3] ARM: bcm: Enable CFE SMP on BCMBCA
2026-10-25 18:01 UTC (5+ messages)
` [PATCH v4 1/3] dt-bindings: arm: cpus: Add brcm,bca-smp enable method
` [PATCH v4 2/3] ARM: bcm: Add CFE SMP support for BCMBCA
` [PATCH v4 3/3] ARM: dts: broadcom: Use CFE CPU bring-up on the XG6846B
[PATCH 0/3] serial: 8250_dw: describe the Allwinner H616 UART configuration
2026-10-25 17:38 UTC (11+ messages)
` [PATCH 2/3] serial: 8250_dw: configure the Allwinner H616 UART
[PATCH] ARM: dts: samsung: exynos4412-p4note: allow powering off the wifi card
2026-10-25 17:14 UTC (2+ messages)
[PATCH v8 0/3] media: Add Himax HM1092 mono NIR sensor driver
2026-10-25 16:42 UTC (5+ messages)
` [PATCH v8 1/3] media: dt-bindings: Add Himax HM1092 NIR sensor
` [PATCH v8 2/3] media: i2c: hm1092: add Himax HM1092 mono NIR sensor driver
` [PATCH v8 3/3] media: i2c: hm1092: Add ACPI enumeration and the 19.2 MHz configuration
[RFC net-next 0/3] net: airoha: npu: keep NPU-shared DMA buffers in the NPU window
2026-10-25 15:42 UTC (3+ messages)
` [RFC net-next 1/3] dt-bindings: net: airoha: npu: add DMA pool memory region
[PATCH 0/2] ASoC: rt5631: Support an MCLK clock from the SoC
2026-10-25 15:24 UTC (5+ messages)
` [PATCH 1/2] ASoC: dt-bindings: realtek,rt5631: Add the optional MCLK
` [PATCH 2/2] ASoC: codecs: rt5631: Enable "
[PATCH v3 0/3] pinctrl: sunxi: number the IRQ banks from the first one that has IRQs
2026-10-25 14:24 UTC (3+ messages)
` [PATCH v3 2/3] dt-bindings: pinctrl: sun55i-a523: one interrupt per implemented bank
` [PATCH v3 3/3] arm64: dts: allwinner: a523: drop the PA GPIO interrupt
[PATCH RFC 0/2] mmc: jz4740: Use the integrated DMA controller on the X1600
2026-10-25 14:23 UTC (5+ messages)
` [PATCH RFC 1/2] dt-bindings: mmc: ingenic: Add "
` [PATCH RFC 2/2] mmc: jz4740: Use the integrated DMA controller on "
[PATCH v2 0/3] pinctrl: sunxi: number the IRQ banks from the first one that has IRQs
2026-10-25 14:18 UTC (5+ messages)
` [PATCH v2 2/3] dt-bindings: pinctrl: sun55i-a523: one interrupt per implemented bank
` [PATCH v2 3/3] arm64: dts: allwinner: a523: drop the PA GPIO interrupt
[PATCH v2 0/3] Add Loongson-2K0300 APB DMA mux support
2026-10-25 13:49 UTC (4+ messages)
` [PATCH v2 3/3] dmaengine: loongson: Add Loongson-2K0300 APB DMA mux driver
[PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add SPI3 QUP core bandwidth OPP
2026-10-25 13:43 UTC
[PATCH 0/2] drm/panel: Add IL97680A panels for Retroid Pocket Nova and Duo
2026-10-25 13:37 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: display: panel: Add Retroid Pocket IL97680A panels
` [PATCH 2/2] drm/panel: Add Ilitek IL97680A panels for Retroid Pocket Nova and Duo
[PATCH v3 0/2] riscv: dts: spacemit: mark K1 boot nodes bootph-pre-ram
2026-10-25 13:02 UTC (4+ messages)
` [PATCH v3 1/2] riscv: dts: spacemit: k1: mark boot-critical SoC "
[PATCH v7 0/7] riscv: Add device tree support for UltraRISC DP1000
2026-10-25 12:24 UTC (8+ messages)
` [PATCH v7 1/7] dt-bindings: vendor-prefixes: Add shenrongda
` [PATCH v7 2/7] dt-bindings: riscv: cpus: Add UltraRISC CP100 compatible
` [PATCH v7 3/7] dt-bindings: riscv: Add UltraRISC DP1000 board compatibles
` [PATCH v7 4/7] dt-bindings: timer: Add UltraRISC DP1000 CLINT
` [PATCH v7 5/7] riscv: dts: ultrarisc: Add initial device tree for UltraRISC DP1000
` [PATCH v7 6/7] riscv: dts: ultrarisc: Add Shenzhen Rongda M0 board device tree
` [PATCH v7 7/7] riscv: dts: ultrarisc: Add Milk-V Titan "
[PATCH v3 0/4] arm64: dts: freescale: Add Verdin iMX8M OV5640 camera overlays
2026-10-25 11:43 UTC (6+ messages)
` [PATCH v3 4/4] arm64: dts: freescale: imx8mp-verdin: Add mezzanine OV5640 overlays
[PATCH v22 00/14] media: qcom: camss: Add Kaanapali support
2026-10-25 11:15 UTC (20+ messages)
` [PATCH v22 01/14] dt-bindings: phy: qcom,x1e80100-csi2-phy: Add Kaanapali CSI2 PHY
` [PATCH v22 02/14] phy: qcom-mipi-csi2: Parametrise the common status register offset
` [PATCH v22 03/14] phy: qcom-mipi-csi2: Add Kaanapali support
` [PATCH v22 04/14] media: qcom: camss: Add addr_update hooks and guard CSID reg_update
` [PATCH v22 05/14] media: dt-bindings: Add CAMSS device for Kaanapali
` [PATCH v22 06/14] media: qcom: camss: Add Kaanapali compatible
` [PATCH v22 07/14] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY
` [PATCH v22 08/14] media: qcom: camss: csid: Add support for CSID 1080
` [PATCH v22 09/14] media: qcom: camss: vfe: Add support for VFE 1080
` [PATCH v22 10/14] media: qcom: camss: tpg: Add support for v2.4.0 TPG
` [PATCH v22 11/14] arm64: dts: qcom: kaanapali: Add CAMSS and CSIPHY block definitions
` [PATCH v22 12/14] arm64: dts: qcom: kaanapali: Add CCI controller nodes
` [PATCH v22 13/14] arm64: dts: qcom: kaanapali: Add camera MCLK pinctrl
` [PATCH v22 14/14] arm64: dts: qcom: kaanapali-mtp-camera-s5kjn5: Add DT overlay
[PATCH 0/7] arm64: renesas: r8a78000: Enable GPIO support
2026-10-25 11:02 UTC (4+ messages)
` [PATCH 3/7] arm64: dts: renesas: r8a78000: Add GPIO controller nodes
[PATCH net-next v3 2/2] net: wwan: qcom_bam_dmux: Assign restricted DMA pool to remote processor
2026-10-25 10:23 UTC (2+ messages)
[PATCH net-next v3 1/2] dt-bindings: net: qcom,bam-dmux: Add memory-region and qcom,vmid properties
2026-10-25 10:23 UTC (2+ messages)
[PATCH 0/5] drm/ingenic: Add the X1600 LCD controller and the HiBy R1 panel
2026-10-25 9:44 UTC (7+ messages)
` [PATCH 1/5] dt-bindings: vendor-prefixes: Add HiBy
` [PATCH 2/5] dt-bindings: display: Add the Ingenic X1600 LCD controller
` [PATCH 3/5] drm/ingenic: Add a driver for the "
` [PATCH 4/5] dt-bindings: display: panel: Add the HiBy LG35583
` [PATCH 5/5] drm/panel: "
[PATCH 0/2] pwm: Add the Ingenic X1600 PWM controller
2026-10-25 9:03 UTC (4+ messages)
` [PATCH 1/2] dt-bindings: "
` [PATCH 2/2] pwm: Add a driver for "
[PATCH v4 0/7] drm/tegra: Add support for Tegra20/Tegra30 8-bit CPU interface
2026-10-25 8:51 UTC (5+ messages)
` [PATCH v4 7/7] drm/tegra: Add support for "
[PATCH v3 0/2] riscv: dts: spacemit: mark K1 boot nodes bootph-pre-ram
2026-10-25 8:39 UTC
[PATCH v2] arm64: dts: qcom: shikra: Raise CPU critical trips
2026-10-25 8:03 UTC
[PATCH v2] arm64: dts: qcom: x1e80100-medion-sprchrgd-14-s1: Add PWM backlight
2026-10-25 7:51 UTC
[PATCH] dt-bindings: display: panel: ilitek,ili7807s: Allow backlight property
2026-10-25 6:56 UTC (2+ messages)
[GIT PULL] Devicetree updates for v7.4
2026-10-25 6:19 UTC (3+ messages)
[PATCH v2 0/7] mfd: qcom-pm8008: Add support for PM8010 over I2C
2026-10-25 6:07 UTC (5+ messages)
` [PATCH v2 3/7] regulator: qcom-pm8008: Add PM8010 mode support
[PATCH v2 2/3] dt-bindings: iio: cdc: add Texas Instruments FDC1004
2026-10-25 5:48 UTC
[PATCH v5 0/2] iio: adc: add mt6397 PMIC AUXADC support
2026-10-25 5:18 UTC (3+ messages)
` [PATCH v5 1/2] dt-bindings: iio: adc: mediatek,mt6359-auxadc: add mt6397 PMIC AUXADC
` [PATCH v5 2/2] iio: adc: mt6397-auxadc: add mt6397 PMIC AUXADC driver
[PATCH RFC 0/2] remoteproc: qcom: wcss-sec: add IPQ8074 with a separate M3 image
2026-10-25 4:21 UTC (3+ messages)
` [PATCH RFC 1/2] dt-bindings: remoteproc: qcom: wcss-sec: add IPQ8074
` [PATCH RFC 2/2] remoteproc: qcom: wcss-sec: add IPQ8074 support
[PATCH v3 00/15] Add support for structured tags and v18 dtb version
2026-10-25 2:32 UTC (6+ messages)
` [PATCH v3 12/15] libfdt: Introduce fdt_getprop_offset_namelen()
[PATCH v3 15/15] Introduce v18 dtb version
2026-10-25 2:11 UTC (11+ messages)
[PATCH] arm64: dts: qcom: monaco: reserve firmware carve-outs
2026-10-25 1:09 UTC
[PATCH 0/3] hwrng: add Microchip RNG90 support
2026-10-24 23:22 UTC (5+ messages)
` [PATCH 1/3] dt-bindings: trivial-devices: add Microchip RNG90
` [PATCH 2/3] hwrng: add Microchip RNG90 driver
` [PATCH 3/3] hwrng: rng90: add KUnit tests
[PATCH v5 0/2] kbuild: Support directory targets for DTBs
2026-10-24 22:33 UTC (3+ messages)
` [PATCH v5 1/2] kbuild: Convert %.dtb(o) targets to single target rules
[PATCH v2] arm64: dts: rockchip: Add the GPIO expander to Kobol Helios64
2026-10-24 22:15 UTC
[PATCH v2 0/2] serial: 8250_ingenic: Set UMR and UACR, add the X1600
2026-10-24 22:07 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: serial: ingenic: Add "
` [PATCH v2 2/2] serial: 8250_ingenic: Set UMR and UACR at probe
[PATCH v3 0/2] ASoC: jz4740-i2s: Add the X1600
2026-10-24 21:44 UTC (3+ messages)
` [PATCH v3 1/2] ASoC: dt-bindings: ingenic,aic: "
` [PATCH v3 2/2] ASoC: jz4740-i2s: Add support for "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox