messages from 2026-11-06 13:08:13 to 2026-11-06 17:04:22 UTC [more...]
[PATCH v3 0/7] iio: adc: ad7625: add LTC2387 and ADAQ2387x support
2026-11-06 17:04 UTC (9+ messages)
` [PATCH v3 1/7] pwm: core: add pwm_get_waveform_step_might_sleep()
` [PATCH v3 2/7] pwm: axi-pwmgen: report the waveform step
` [PATCH v3 3/7] iio: adc: ad7625: fix sampling frequency handling
` [PATCH v3 4/7] iio: adc: ad7625: use standard unit names
` [PATCH v3 5/7] iio: adc: ad7625: move initial mode setup
` [PATCH v3 6/7] dt-bindings: iio: adc: add adi,ltc2387
` [PATCH v3 7/7] iio: adc: ad7625: add LTC2387 and ADAQ2387x support
[PATCH v3 0/7] BCMBCA PMB power, clock, reset and hardware monitoring support
2026-11-06 17:03 UTC (3+ messages)
` [PATCH v3 2/7] dt-bindings: soc: Describe the BCM6846 Processor Monitor Bus
[PATCH 0/2] pinctrl: Add the Siflower SF19A2890 pin controller
2026-11-06 17:01 UTC (3+ messages)
` [PATCH 2/2] pinctrl: Add Siflower SF19A2890 pin controller driver
[PATCH 0/4] clk: Add the Siflower SF19A2890 clock manager and peripheral clock and reset managers
2026-11-06 17:00 UTC (3+ messages)
` [PATCH 4/4] clk: siflower: Add SF19A2890 peripheral clock and reset manager driver
[PATCH 0/3] clk: qcom: Add SM8350 camera clock controller
2026-11-06 16:59 UTC (3+ messages)
` [PATCH 2/3] clk: qcom: Add SM8350 camera clock controller driver
[PATCH 0/3] spmi: Add SmartDV SPMI controller driver and bindings
2026-11-06 16:58 UTC (3+ messages)
` [PATCH 3/3] spmi: Add SmartDV SPMI controller driver
[PATCH 0/2] dmaengine: ma35d1-pdma: Add MA35D1 PDMA driver
2026-11-06 16:57 UTC (3+ messages)
` [PATCH 2/2] "
[PATCH v2 0/4] arm64: dts: apple: dt-check-style strict fixes for Apple M4
2026-11-06 16:56 UTC (5+ messages)
` [PATCH v2 1/4] arm64: dts: apple: t8132: Fix indentation-related dt-check-style issues
` [PATCH v2 2/4] arm64: dts: apple: t8132: Fix blank-lines-related "
` [PATCH v2 3/4] arm64: dts: apple: t8132: Fix line-length-related "
` [PATCH v2 4/4] arm64: dts: apple: t8132: Fix ordering-related "
[PATCH 0/2] iio: magnetometer: add Infineon TLE493D-W2B6 support
2026-11-06 16:54 UTC (8+ messages)
` [PATCH 1/2] dt-bindings: iio: magnetometer: add Infineon TLE493D-W2B6
` [PATCH 2/2] iio: magnetometer: add Infineon TLE493D-W2B6 driver
[PATCH v2 0/8] Update BSH SystemMaster device trees and add SMM-M2B support
2026-11-06 16:50 UTC (7+ messages)
` [PATCH v2 3/8] ARM: dts: imx6ulz: Adjust BSH SMM-M2 Wi-Fi and Bluetooth pin settings
` [PATCH v2 4/8] ARM: dts: imx6ulz: Fix BSH SMM-M2 WLAN host wake configuration
` [PATCH v2 8/8] dts: imx: Enable USB OTG mode on BSH SMM-M2 and SMM-S2
[PATCH v5 0/3] Add TI LM51772 buck-boost voltage regulator
2026-11-06 16:44 UTC (5+ messages)
` [PATCH v5 3/3] regulator: Add TI LM51772 support
[PATCH v3 00/13] Update watchdogs support on STM32MP platforms
2026-11-06 16:34 UTC (14+ messages)
` [PATCH v3 01/13] watchdog: stm32_iwdg: get hardware version during probe
` [PATCH v3 02/13] watchdog: stm32_iwdg: detect whether the watchdog is running
` [PATCH v3 03/13] watchdog: stm32_iwdg: add pretimeout support for iwdg v4.0
` [PATCH v3 04/13] ARM: stm32: enable arm smc watchdog on stm32mp1xx
` [PATCH v3 05/13] ARM: dts: stm32: add iwdg1 node on stm32mp151 SoC
` [PATCH v3 06/13] ARM: dts: stm32: enable iwdg1 on stm32mp15x ST boards
` [PATCH v3 07/13] ARM: dts: stm32: move arm smc watchdog to stm32mp151 SoC
` [PATCH v3 08/13] ARM: dts: stm32: enable arm smc watchdog on stm32mp15x scmi boards
` [PATCH v3 09/13] ARM: dts: stm32: add watchdog0 alias on ST stm32mp1xx boards
` [PATCH v3 10/13] arm64: dts: st: add iwdg1 and iwdg2 support to stm32mp211
` [PATCH v3 11/13] arm64: dts: st: add iwdg1 and iwdg2 support to stm32mp231
` [PATCH v3 12/13] arm64: dts: st: add iwdg1 and iwdg2 support to stm32mp251
` [PATCH v3 13/13] arm64: dts: st: enable iwdg2 on stm32mp2xx ST boards
[PATCH 1/1] Revert "arm64: dts: imx8qm-ss-conn: add usbotg3 iommu information"
2026-11-06 16:26 UTC (2+ messages)
[PATCH 0/5] riscv: dts: spacemit: k3-com260: Describe SD card, SPI NOR and MAC
2026-11-06 16:25 UTC (3+ messages)
` [PATCH 3/5] riscv: dts: spacemit: k3-com260: Add SPI NOR flash
[PATCH v4 0/8] clk: stm32mp25: add Cortex-M0 D3 clocks, ETR/STM and USB2PHY1 STP
2026-11-06 16:16 UTC (9+ messages)
` [PATCH v4 1/8] clk: stm32mp25: define the number of clocks in the driver
` [PATCH v4 2/8] dt-bindings: stm32: add kernel clocks for ETR and STM
` [PATCH v4 3/8] clk: stm32mp25: update register with reference manual
` [PATCH v4 4/8] dt-bindings: stm32: add clocks for Cortex-CM0 on stm32mp25
` [PATCH v4 5/8] clk: stm32mp25: add clock for D3 peripherals allocation for Cortex-CM0
` [PATCH v4 6/8] dt-bindings: stm32: add usb2phy1stp clock on stm32mp25
` [PATCH v4 7/8] clk: stm32mp25: add ck_ker_usb2phy1_stp clock
` [PATCH v4 8/8] dt-bindings: stm32: use reference manual names for ETR and STM bus clocks
[PATCH v7 00/19] drm: starfive: jh7110: Enable display subsystem
2026-11-06 16:12 UTC (24+ messages)
` [PATCH v7 01/19] drm/bridge: inno-hdmi: fix swapped HSYNC and VSYNC polarity
` [PATCH v7 02/19] drm/bridge: inno-hdmi: Don't dereference a NULL drm_device on hotplug
` [PATCH v7 03/19] dt-bindings: display: bridge: Add starfive,jh7110-inno-hdmi-controller
` [PATCH v7 04/19] dt-bindings: display: starfive: Add starfive,jh7110-hdmi-subsystem
` [PATCH v7 05/19] dt-bindings: soc: starfive: Add starfive,jh7110-vout-syscon
` [PATCH v7 06/19] dt-bindings: display: verisilicon: Add starfive,jh7110-dc8200
` [PATCH v7 07/19] dt-bindings: display: starfive: Add starfive,jh7110-vout-subsystem
` [PATCH v7 08/19] drm/bridge: inno-hdmi: Split probe out of bind
` [PATCH v7 09/19] drm/bridge: inno-hdmi: Use a regmap for register access
` [PATCH v7 10/19] drm/bridge: inno-hdmi: Add .disable platform operation
` [PATCH v7 11/19] drm/bridge: inno-hdmi: Add .mode_valid "
` [PATCH v7 12/19] drm/bridge: inno-hdmi: Make the PHY configuration table optional
` [PATCH v7 13/19] drm/bridge: inno-hdmi: Make the register clock source selectable
` [PATCH v7 14/19] drm/bridge: inno-hdmi: Make the supported HDMI version selectable
` [PATCH v7 15/19] soc: starfive: Add jh7110-hdmi-subsystem driver
` [PATCH v7 16/19] soc: starfive: Add jh7110-vout-subsystem driver
` [PATCH v7 17/19] drm/bridge: starfive: Add JH7110 HDMI controller driver
` [PATCH v7 18/19] riscv: dts: starfive: jh7110: Update DT for display subsystem
` [PATCH v7 19/19] MAINTAINERS: Add StarFive JH7110 display subsystem entry
[PATCH v2 4/5] dt-bindings: iio: adc: adi,ad7625: add LTC2387 and ADAQ2387x
2026-11-06 16:11 UTC (2+ messages)
[PATCH v2 1/5] pwm: core: add pwm_get_waveform_step_might_sleep()
2026-11-06 16:11 UTC (2+ messages)
[PATCH v2 5/5] iio: adc: ad7625: add LTC2387 and ADAQ2387x support
2026-11-06 16:10 UTC (2+ messages)
[PATCH v3 0/8] clk: stm32mp25: add Cortex-M0 D3 clocks, ETR/STM and USB2PHY1 STP
2026-11-06 15:56 UTC (10+ messages)
` [PATCH v3 1/8] clk: stm32mp25: define the number of clocks in the driver
` [PATCH v3 2/8] dt-bindings: stm32: add kernel clocks for ETR and STM
` [PATCH v3 3/8] clk: stm32mp25: update register with reference manual
` [PATCH v3 4/8] dt-bindings: stm32: add clocks for Cortex-CM0 on stm32mp25
` [PATCH v3 5/8] clk: stm32mp25: add clock for D3 peripherals allocation for Cortex-CM0
` [PATCH v3 6/8] dt-bindings: stm32: add usb2phy1stp clock on stm32mp25
` [PATCH v3 7/8] clk: stm32mp25: add ck_ker_usb2phy1_stp clock
` [PATCH v3 8/8] dt-bindings: stm32: use reference manual names for ETR and STM bus clocks
[PATCH v6 00/10] drm/tegra: Add support for Tegra20/Tegra30 8-bit CPU interface
2026-11-06 15:51 UTC (30+ messages)
` [PATCH v6 01/10] drm: Add MIPI DBI bus support for MIPI DBI Type A and B
` [PATCH v6 02/10] drm/panel: Convert Hitachi TX10D07VM0BAA to use MIPI DBI bus
` [PATCH v6 03/10] drm/panel: Convert LG LH400WV3-SD04 "
` [PATCH v6 04/10] drm/tegra: dc: Refactor and expand header
` [PATCH v6 05/10] dt-bindings: display: tegra: Document Tegra20 DSI port
` [PATCH v6 06/10] drm/tegra: Make panel parsing by tegra_output_probe() optional
` [PATCH v6 09/10] dt-bindings: display: tegra: Document 8-bit CPU parallel interface
` [PATCH v6 10/10] drm/tegra: Add support for 8-bit CPU interface
[PATCH v4 0/3] usb: dwc3: xilinx: Add Versal2 MMI USB 3.2 controller support
2026-11-06 15:51 UTC (4+ messages)
` [PATCH v4 2/3] usb: dwc3: xilinx: Add Versal2 MMI USB 3.2 controller support with flat probe model
[PATCH v2 0/2] arm64: dts: freescale: Re-enable A72 cluster on i.MX8QM boards
2026-11-06 15:47 UTC (2+ messages)
[PATCH net-next v4 00/14] Add ETHSW support for Renesas RZ/T2H and RZ/N2H SoCs
2026-11-06 15:44 UTC (5+ messages)
` [PATCH net-next v4 04/14] dt-bindings: net: dsa: renesas,rzn1-a5psw: Reject the "ports" node
` [PATCH net-next v4 05/14] dt-bindings: net: dsa: renesas,rzn1-a5psw: Disallow ports beyond port@4
[PATCH v5 3/4] dt-bindings: iio: cdc: add Texas Instruments FDC1004
2026-11-06 15:40 UTC
[PATCH v4 0/2] ASoC: codecs: Add support for Fortemedia FM34NE DSP
2026-11-06 15:37 UTC (3+ messages)
` [PATCH v4 1/2] ASoC: dt-bindings: Document "
[PATCH 0/6] spi: qcom-geni: Add QSPI support over GPI DMA
2026-11-06 15:32 UTC (10+ messages)
` [PATCH 1/6] spi: spi-geni-qcom: Add transfer_one_message() support
` [PATCH 2/6] dt-bindings: dma: qcom-gpi: Add QSPI protocol identifier
` [PATCH 3/6] dt-bindings: spi: qcom,spi-geni-qcom: Document QSPI support
` [PATCH 4/6] soc: qcom: geni-se: Define the QSPI firmware protocol
` [PATCH 5/6] dmaengine: qcom: gpi: Add QSPI protocol support
` [PATCH 6/6] spi: spi-geni-qcom: Add QSPI support over GPI DMA
[PATCH v4 0/6] Add eDP support for RK3568
2026-11-06 15:29 UTC (5+ messages)
` [PATCH v4 2/6] dt-bindings: phy: Add rockchip,rk3568-edp-phy
[PATCH v14 0/8] Add initial support for Qualcomm SM7250 SoC
2026-11-06 15:15 UTC (9+ messages)
` [PATCH v14 1/8] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v14 2/8] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v14 3/8] thermal/qcom/lmh: Switch to match data for SoC CPU-to-node mappings
` [PATCH v14 4/8] dt-bindings: thermal: lmh: Document SM7250 LMh
` [PATCH v14 5/8] thermal/qcom/lmh: Add support for Qualcomm SM7250
` [PATCH v14 6/8] dt-bindings: firmware: qcom,scm: Document SM7250 SCM
` [PATCH v14 7/8] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
` [PATCH v14 8/8] arm64: dts: qcom: Add SM7250 devicetree file
[PATCH v1 0/3] serial: Support driver-selected TTY wakeup defaults
2026-11-06 15:16 UTC (3+ messages)
[PATCH 0/2] regulator: fan53555: Add support for Silergy SYM827
2026-11-06 15:13 UTC (3+ messages)
` [PATCH 1/2] regulator: dt-bindings: fan53555: Add "
` [PATCH 2/2] regulator: fan53555: Add support for "
[PATCH v4 0/6] arm-mpam: Add basic device tree support for resctrl
2026-11-06 15:08 UTC (5+ messages)
[PATCH v3 0/5] drm/ingenic: Add the X1600 display controller and the HiBy R1 panel
2026-11-06 15:06 UTC (5+ messages)
` [PATCH v3 3/5] drm/ingenic: Add a driver for the X1600 display controller
[PATCH v2 0/7] BCMBCA PMB clock, reset and hardware monitoring support
2026-11-06 14:51 UTC (5+ messages)
` [PATCH v2 6/7] hwmon: Add Broadcom PMB PVTMON monitoring
[PATCH 0/3] nvmem: Add driver for i.MX BBNSM GP register
2026-11-06 14:49 UTC (4+ messages)
` [PATCH 2/3] "
[PATCH v4 0/3] Add RISC-V RPMI voltage service support
2026-11-06 14:46 UTC (3+ messages)
` [PATCH v4 2/3] regulator: Add RPMI voltage service
[PATCH v7 0/8] Add Qualcomm JPEG V4L2 encoder for SM8250 and SC7280
2026-11-06 14:42 UTC (4+ messages)
` [PATCH v7 1/8] dt-bindings: media: qcom: Add JPEG encoder binding
[PATCH v14 0/9] media: qcom: camss: CAMSS Offline Processing Engine support
2026-11-06 14:42 UTC (12+ messages)
` [PATCH v14 1/9] media: qcom: camss: Add V4L2 meta format for CAMSS ISP parameters
` [PATCH v14 2/9] dt-bindings: media: qcom: Add CAMSS Offline Processing Engine (OPE)
` [PATCH v14 3/9] dt-bindings: media: qcom,qcm2290-camss-ope: Document shikra compatible
` [PATCH v14 4/9] media: uapi: Add CAMSS ISP configuration definition
` [PATCH v14 5/9] media: Documentation: uapi: Add qcom-camss ISP params documentation
` [PATCH v14 6/9] media: qcom: camss: Add CAMSS Offline Processing Engine driver
` [PATCH v14 7/9] arm64: dts: qcom: agatti: Add OPE node
` [PATCH v14 8/9] arm64: dts: qcom: shikra: "
` [PATCH v14 9/9] arm64: defconfig: Enable Qualcomm CAMSS OPE driver
[PATCH 0/7] ARM: dts: arm: Another batch of warning fixes
2026-11-06 14:40 UTC (6+ messages)
[PATCH v16 0/7] Provide support for Trigger Generation Unit
2026-11-06 14:37 UTC (3+ messages)
[PATCH v4 0/4] mfd: max8907: Schema, pdata and poweroff
2026-11-06 14:35 UTC (3+ messages)
` [PATCH v4 1/4] regulator: dt-bindings: maxim,max8907: Convert to DT schema
[PATCH v5 0/4] dmaengine: zynqmp_dma: Add reset support for Versal Gen2 and Versal Net
2026-11-06 14:28 UTC (5+ messages)
` [PATCH v5 1/4] dt-bindings: dma: xlnx,zynqmp-dma: Require resets for Versal Gen2
` [PATCH v5 2/4] dt-bindings: dma: xlnx,zynqmp-dma: Add Versal Net compatible
[PATCH v7 0/5] phy: Add the StarFive JH7110 Innosilicon HDMI PHY
2026-11-06 14:26 UTC (8+ messages)
` [PATCH v7 1/5] dt-bindings: phy: Add starfive,jh7110-inno-hdmi-phy
` [PATCH v7 2/5] phy: Add common Innosilicon HDMI PHY helpers
` [PATCH v7 3/5] phy: rockchip: inno-hdmi: Use the common Innosilicon "
` [PATCH v7 4/5] phy: starfive: Add jh7110-inno-hdmi-phy driver
` [PATCH v7 5/5] MAINTAINERS: Add StarFive JH7110 HDMI PHY entry
[PATCH v5 0/3] ARM: bcm: Enable CFE SMP on BCMBCA
2026-11-06 14:25 UTC (3+ messages)
` [PATCH v5 1/3] dt-bindings: arm: cpus: Add brcm,bca-smp enable method
[PATCH] dt-bindings: reset: Remove orphan bt1-ccu.h
2026-11-06 14:17 UTC (2+ messages)
[PATCH net-next v4 0/8] net: dsa: Add support for SoC-e Ethernet switch IP cores
2026-11-06 14:17 UTC (9+ messages)
` [PATCH net-next v4 3/8] dt-bindings: net: dsa: Add SoC-e SWIP switch function
` [PATCH net-next v4 4/8] dt-bindings: mfd: Add SoC-e SWIP parent
` [PATCH net-next v4 5/8] net: dsa: Add tag handling for SoC-e switches
` [PATCH net-next v4 8/8] net: dsa: soce: Add VLAN membership table support
[PATCH 0/2] arm64: dts: imx8mp-phyboard-pollux: updates
2026-11-06 14:12 UTC (4+ messages)
` [PATCH 1/2] arm64: dts: imx8mp-phyboard-pollux: fix i2c3 gpios
` [PATCH 2/2] arm64: dts: imx8mp-phyboard-pollux: update gpio-line-names
[PATCH v6 0/5] regulator: add the Will Semiconductor WL2868C camera PMIC
2026-11-06 14:10 UTC (3+ messages)
` [PATCH v6 1/5] regulator: dt-bindings: willsemi,wl2868c: add the "
[PATCH v3 0/2] Add initial device tree support for the Xiaomi Mi Box 4 (MDZ-21-AA), an Amlogic S905L based TV box
2026-11-06 14:04 UTC (4+ messages)
` [PATCH v3 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support
[PATCH 1/4] dt-bindings: vendor-prefixes: add PocketGo
2026-11-06 13:54 UTC (3+ messages)
[PATCH v3 00/11] gpio: vf610: fix clocks and misc cleanup
2026-11-06 13:29 UTC (5+ messages)
` [PATCH v3 02/11] gpio: vf610: simplify with irq_set_irq_wake()
` [PATCH v3 03/11] gpio: vf610: use devm_clk_get_optional_enabled() for clock handling
[PATCH v8 0/6] of: teach overlay code to keep /aliases in sync
2026-11-06 13:24 UTC (4+ messages)
[PATCH] dt-bindings: arm: omap-l3-noc: Convert to DT schema
2026-11-06 13:23 UTC (3+ messages)
[PATCH v2 0/2] firmware: meson: sm: make power-off work on S4
2026-11-06 13:09 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: firmware: amlogic,meson-gxbb-sm: add amlogic,meson-s4-sm
[PATCH v2 0/2] media: rc: meson-ir: wake the system from the remote
2026-11-06 13:08 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: media: amlogic,meson6-ir: allow wakeup-source
[PATCH 0/5] clk: qcom: Add NSS clock controller support for IPQ5210 SoC
2026-11-06 13:08 UTC (5+ messages)
` [PATCH 4/5] arm64: dts: qcom: Update IPQ5210 xo_board to use fixed factor clock
` [PATCH 5/5] arm64: dts: qcom: ipq5210: Add NSS clock controller node
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox