Re: [PATCH v2] pinctrl: qcom: Add sdm660 pinctrl driver

[Craig Tatlor <ctatlor97@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 34165 bytes --]

I  know, just did this because it is basically exactly same as other qcom pinctrl docs and they also only had one patch.

On 13 August 2018 08:24:43 BST, "Michal Vokáč" <michal.vokac@ysoft.com> wrote:
>Hi Craig,
>On 12.8.2018 16:24, Craig Tatlor wrote:
>> Add initial pinctrl driver to support pin configuration with
>> pinctrl framework for sdm660.
>> Based off CAF implementation.
>> 
>> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
>> ---
>
>The documentation portion should be a separate patch.
>Please refer to
>Documentation/devicetree/bindings/submitting-patches.txt
>
>It is easier for DT maintainers to review just the relevant part.
>The binding patches are also rebased to a separate tree as they are not
>Linux specific and can be re-used in other OSes
>
>Best regards,
>Michal
>
>> Changes from v1:
>>    Adds gpio-ranges property to bindings
>> 
>> 
>>   .../bindings/pinctrl/qcom,sdm660-pinctrl.txt  |  202 +++
>>   drivers/pinctrl/qcom/Kconfig                  |   10 +
>>   drivers/pinctrl/qcom/Makefile                 |    1 +
>>   drivers/pinctrl/qcom/pinctrl-sdm660.c         | 1451
>+++++++++++++++++
>>   4 files changed, 1663 insertions(+)
>>   create mode 100644
>Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
>>   create mode 100644 drivers/pinctrl/qcom/pinctrl-sdm660.c
>> 
>> diff --git
>a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
>b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
>> new file mode 100644
>> index 000000000000..801960ad2112
>> --- /dev/null
>> +++
>b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
>> @@ -0,0 +1,202 @@
>> +Qualcomm Technologies, Inc. SDM660 TLMM block
>> +
>> +This binding describes the Top Level Mode Multiplexer block found in
>the
>> +SDM660 platform.
>> +
>> +- compatible:
>> +	Usage: required
>> +	Value type: <string>
>> +	Definition: must be "qcom,sdm660-pinctrl"
>> +
>> +- reg:
>> +	Usage: required
>> +	Value type: <prop-encoded-array>
>> +	Definition: the base address and size of the TLMM register space.
>> +
>> +- interrupts:
>> +	Usage: required
>> +	Value type: <prop-encoded-array>
>> +	Definition: should specify the TLMM summary IRQ.
>> +
>> +- interrupt-controller:
>> +	Usage: required
>> +	Value type: <none>
>> +	Definition: identifies this node as an interrupt controller
>> +
>> +- #interrupt-cells:
>> +	Usage: required
>> +	Value type: <u32>
>> +	Definition: must be 2. Specifying the pin number and flags, as
>defined
>> +		    in <dt-bindings/interrupt-controller/irq.h>
>> +
>> +- gpio-controller:
>> +	Usage: required
>> +	Value type: <none>
>> +	Definition: identifies this node as a gpio controller
>> +
>> +- gpio-ranges:
>> +	Usage: required
>> +	Value type: <prop-encoded-array>
>> +	Definition: Specifies the mapping between gpio controller and
>> +		    pin-controller pins.
>> +
>> +- #gpio-cells:
>> +	Usage: required
>> +	Value type: <u32>
>> +	Definition: must be 2. Specifying the pin number and flags, as
>defined
>> +		    in <dt-bindings/gpio/gpio.h>
>> +
>> +Please refer to ../gpio/gpio.txt and
>../interrupt-controller/interrupts.txt for
>> +a general description of GPIO and interrupt bindings.
>> +
>> +Please refer to pinctrl-bindings.txt in this directory for details
>of the
>> +common pinctrl bindings used by client devices, including the
>meaning of the
>> +phrase "pin configuration node".
>> +
>> +The pin configuration nodes act as a container for an arbitrary
>number of
>> +subnodes. Each of these subnodes represents some desired
>configuration for a
>> +pin, a group, or a list of pins or groups. This configuration can
>include the
>> +mux function to select on those pin(s)/group(s), and various pin
>configuration
>> +parameters, such as pull-up, drive strength, etc.
>> +
>> +
>> +PIN CONFIGURATION NODES:
>> +
>> +The name of each subnode is not important; all subnodes should be
>enumerated
>> +and processed purely based on their content.
>> +
>> +Each subnode only affects those parameters that are explicitly
>listed. In
>> +other words, a subnode that lists a mux function but no pin
>configuration
>> +parameters implies no information about any pin configuration
>parameters.
>> +Similarly, a pin subnode that describes a pullup parameter implies
>no
>> +information about e.g. the mux function.
>> +
>> +
>> +The following generic properties as defined in pinctrl-bindings.txt
>are valid
>> +to specify in a pin configuration subnode:
>> +
>> +- pins:
>> +	Usage: required
>> +	Value type: <string-array>
>> +	Definition: List of gpio pins affected by the properties specified
>in
>> +		    this subnode.  Valid pins are:
>> +		    gpio0-gpio113,
>> +		        Supports mux, bias and drive-strength
>> +		    sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data
>sdc1_rclk,
>> +		        Supports bias and drive-strength
>> +
>> +- function:
>> +	Usage: required
>> +	Value type: <string>
>> +	Definition: Specify the alternative function to be configured for
>the
>> +		    specified pins. Functions are only valid for gpio pins.
>> +		    Valid values are:
>> +
>> +		    blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
>> +		    bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
>> +		    qdss_cti_trig_out_b, bimc_dte0, dac_calib1,
>qdss_cti_trig_in_b,
>> +		    dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
>> +		    blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0,
>atest_usb12,
>> +		    mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
>> +		    atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio,
>atest_char,
>> +		    cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8,
>qdss_tracedata_b,
>> +		    pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2,
>cci_i2c,
>> +		    qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
>> +		    qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
>> +		    atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
>> +		    atest_usb20, atest_char0, dac_calib10, qdss_stm10,
>> +		    qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6,
>blsp_uim6,
>> +		    blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
>> +		    qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
>> +		    qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
>> +		    dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
>> +		    qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
>> +		    dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
>> +		    dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
>> +		    dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
>> +		    dac_calib22, dac_calib23, dac_calib24, tsif1_sync,
>dac_calib25,
>> +		    sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
>> +		    qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3,
>blsp_i2c3,
>> +		    uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
>> +		    blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
>> +		    qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11,
>blsp_uart11,
>> +		    blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11,
>cri_trng0,
>> +		    cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17,
>blsp_spi4,
>> +		    blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
>> +		    qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
>> +		    isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
>> +		    qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
>> +		    sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
>> +		    gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
>> +		    qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
>> +		    tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd,
>qdss_stm27,
>> +		    qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26,
>tsif2_clk,
>> +		    sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23,
>qdss_tracectl_b,
>> +		    sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
>> +		    ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b,
>blsp11_uart_rx_b,
>> +		    blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1,
>uim_batt,
>> +		    pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
>> +		    qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1,
>gsm_tx,
>> +		    qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2,
>qspi3,
>> +		    gpio
>> +
>> +- bias-disable:
>> +	Usage: optional
>> +	Value type: <none>
>> +	Definition: The specified pins should be configued as no pull.
>> +
>> +- bias-pull-down:
>> +	Usage: optional
>> +	Value type: <none>
>> +	Definition: The specified pins should be configued as pull down.
>> +
>> +- bias-pull-up:
>> +	Usage: optional
>> +	Value type: <none>
>> +	Definition: The specified pins should be configued as pull up.
>> +
>> +- output-high:
>> +	Usage: optional
>> +	Value type: <none>
>> +	Definition: The specified pins are configured in output mode,
>driven
>> +		    high.
>> +		    Not valid for sdc pins.
>> +
>> +- output-low:
>> +	Usage: optional
>> +	Value type: <none>
>> +	Definition: The specified pins are configured in output mode,
>driven
>> +		    low.
>> +		    Not valid for sdc pins.
>> +
>> +- drive-strength:
>> +	Usage: optional
>> +	Value type: <u32>
>> +	Definition: Selects the drive strength for the specified pins, in
>mA.
>> +		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
>> +
>> +Example:
>> +
>> +	tlmm: pinctrl@1010000 {
>> +		compatible = "qcom,sdm660-pinctrl";
>> +		reg = <0x1010000 0x300000>;
>> +		interrupts = <0 208 0>;
>> +		gpio-controller;
>> +		gpio-ranges = <&tlmm 0 0 114>;
>> +		#gpio-cells = <2>;
>> +		interrupt-controller;
>> +		#interrupt-cells = <2>;
>> +
>> +		uart_console_active: uart_console_active {
>> +			mux {
>> +				pins = "gpio4", "gpio5";
>> +				function = "blsp_uart8";
>> +			};
>> +
>> +			config {
>> +				pins = "gpio4", "gpio5";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +		};
>> +	};
>> diff --git a/drivers/pinctrl/qcom/Kconfig
>b/drivers/pinctrl/qcom/Kconfig
>> index 195492033075..091beadb8a1c 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -147,6 +147,16 @@ config PINCTRL_QCOM_SSBI_PMIC
>>            which are using SSBI for communication with SoC. Example
>PMIC's
>>            devices are pm8058 and pm8921.
>>   
>> +config PINCTRL_SDM660
>> +       tristate "Qualcomm Technologies Inc SDM660 pin controller
>driver"
>> +       depends on GPIOLIB && OF
>> +       select PINCTRL_MSM
>> +       help
>> +         This is the pinctrl, pinmux, pinconf and gpiolib driver for
>the
>> +         Qualcomm Technologies Inc TLMM block found on the Qualcomm
>> +         Technologies Inc SDM660 platform.
>> +
>> +
>>   config PINCTRL_SDM845
>>          tristate "Qualcomm Technologies Inc SDM845 pin controller
>driver"
>>          depends on GPIOLIB && OF
>> diff --git a/drivers/pinctrl/qcom/Makefile
>b/drivers/pinctrl/qcom/Makefile
>> index 0c6f3ddc296d..9b08808a2f1c 100644
>> --- a/drivers/pinctrl/qcom/Makefile
>> +++ b/drivers/pinctrl/qcom/Makefile
>> @@ -19,4 +19,5 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) +=
>pinctrl-spmi-gpio.o
>>   obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o
>>   obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o
>>   obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o
>> +obj-$(CONFIG_PINCTRL_SDM660)   += pinctrl-sdm660.o
>>   obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
>> diff --git a/drivers/pinctrl/qcom/pinctrl-sdm660.c
>b/drivers/pinctrl/qcom/pinctrl-sdm660.c
>> new file mode 100644
>> index 000000000000..ded56111f168
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-sdm660.c
>> @@ -0,0 +1,1451 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2018, Craig Tatlor.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pinctrl/pinctrl.h>
>> +
>> +#include "pinctrl-msm.h"
>> +
>> +#define NORTH	0x00900000
>> +#define CENTER	0x00500000
>> +#define SOUTH	0x00100000
>> +#define REG_SIZE 0x1000
>> +
>> +#define FUNCTION(fname)					\
>> +	[msm_mux_##fname] = {		                \
>> +		.name = #fname,				\
>> +		.groups = fname##_groups,               \
>> +		.ngroups = ARRAY_SIZE(fname##_groups),	\
>> +	}
>> +
>> +
>> +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
>> +	{					        \
>> +		.name = "gpio" #id,			\
>> +		.pins = gpio##id##_pins,		\
>> +		.npins = (unsigned)ARRAY_SIZE(gpio##id##_pins),	\
>> +		.funcs = (int[]){			\
>> +			msm_mux_gpio, /* gpio mode */	\
>> +			msm_mux_##f1,			\
>> +			msm_mux_##f2,			\
>> +			msm_mux_##f3,			\
>> +			msm_mux_##f4,			\
>> +			msm_mux_##f5,			\
>> +			msm_mux_##f6,			\
>> +			msm_mux_##f7,			\
>> +			msm_mux_##f8,			\
>> +			msm_mux_##f9			\
>> +		},				        \
>> +		.nfuncs = 10,				\
>> +		.ctl_reg = base + REG_SIZE * id,	\
>> +		.io_reg = base + 0x4 + REG_SIZE * id,		\
>> +		.intr_cfg_reg = base + 0x8 + REG_SIZE * id,		\
>> +		.intr_status_reg = base + 0xc + REG_SIZE * id,	\
>> +		.intr_target_reg = base + 0x8 + REG_SIZE * id,	\
>> +		.mux_bit = 2,			\
>> +		.pull_bit = 0,			\
>> +		.drv_bit = 6,			\
>> +		.oe_bit = 9,			\
>> +		.in_bit = 0,			\
>> +		.out_bit = 1,			\
>> +		.intr_enable_bit = 0,		\
>> +		.intr_status_bit = 0,		\
>> +		.intr_target_bit = 5,		\
>> +		.intr_target_kpss_val = 3,	\
>> +		.intr_raw_status_bit = 4,	\
>> +		.intr_polarity_bit = 1,		\
>> +		.intr_detection_bit = 2,	\
>> +		.intr_detection_width = 2,	\
>> +	}
>> +
>> +#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv)	\
>> +	{					        \
>> +		.name = #pg_name,			\
>> +		.pins = pg_name##_pins,			\
>> +		.npins = (unsigned)ARRAY_SIZE(pg_name##_pins),	\
>> +		.ctl_reg = ctl,				\
>> +		.io_reg = 0,				\
>> +		.intr_cfg_reg = 0,			\
>> +		.intr_status_reg = 0,			\
>> +		.intr_target_reg = 0,			\
>> +		.mux_bit = -1,				\
>> +		.pull_bit = pull,			\
>> +		.drv_bit = drv,				\
>> +		.oe_bit = -1,				\
>> +		.in_bit = -1,				\
>> +		.out_bit = -1,				\
>> +		.intr_enable_bit = -1,			\
>> +		.intr_status_bit = -1,			\
>> +		.intr_target_bit = -1,			\
>> +		.intr_raw_status_bit = -1,		\
>> +		.intr_polarity_bit = -1,		\
>> +		.intr_detection_bit = -1,		\
>> +		.intr_detection_width = -1,		\
>> +	}
>> +
>> +static const struct pinctrl_pin_desc sdm660_pins[] = {
>> +	PINCTRL_PIN(0, "GPIO_0"),
>> +	PINCTRL_PIN(1, "GPIO_1"),
>> +	PINCTRL_PIN(2, "GPIO_2"),
>> +	PINCTRL_PIN(3, "GPIO_3"),
>> +	PINCTRL_PIN(4, "GPIO_4"),
>> +	PINCTRL_PIN(5, "GPIO_5"),
>> +	PINCTRL_PIN(6, "GPIO_6"),
>> +	PINCTRL_PIN(7, "GPIO_7"),
>> +	PINCTRL_PIN(8, "GPIO_8"),
>> +	PINCTRL_PIN(9, "GPIO_9"),
>> +	PINCTRL_PIN(10, "GPIO_10"),
>> +	PINCTRL_PIN(11, "GPIO_11"),
>> +	PINCTRL_PIN(12, "GPIO_12"),
>> +	PINCTRL_PIN(13, "GPIO_13"),
>> +	PINCTRL_PIN(14, "GPIO_14"),
>> +	PINCTRL_PIN(15, "GPIO_15"),
>> +	PINCTRL_PIN(16, "GPIO_16"),
>> +	PINCTRL_PIN(17, "GPIO_17"),
>> +	PINCTRL_PIN(18, "GPIO_18"),
>> +	PINCTRL_PIN(19, "GPIO_19"),
>> +	PINCTRL_PIN(20, "GPIO_20"),
>> +	PINCTRL_PIN(21, "GPIO_21"),
>> +	PINCTRL_PIN(22, "GPIO_22"),
>> +	PINCTRL_PIN(23, "GPIO_23"),
>> +	PINCTRL_PIN(24, "GPIO_24"),
>> +	PINCTRL_PIN(25, "GPIO_25"),
>> +	PINCTRL_PIN(26, "GPIO_26"),
>> +	PINCTRL_PIN(27, "GPIO_27"),
>> +	PINCTRL_PIN(28, "GPIO_28"),
>> +	PINCTRL_PIN(29, "GPIO_29"),
>> +	PINCTRL_PIN(30, "GPIO_30"),
>> +	PINCTRL_PIN(31, "GPIO_31"),
>> +	PINCTRL_PIN(32, "GPIO_32"),
>> +	PINCTRL_PIN(33, "GPIO_33"),
>> +	PINCTRL_PIN(34, "GPIO_34"),
>> +	PINCTRL_PIN(35, "GPIO_35"),
>> +	PINCTRL_PIN(36, "GPIO_36"),
>> +	PINCTRL_PIN(37, "GPIO_37"),
>> +	PINCTRL_PIN(38, "GPIO_38"),
>> +	PINCTRL_PIN(39, "GPIO_39"),
>> +	PINCTRL_PIN(40, "GPIO_40"),
>> +	PINCTRL_PIN(41, "GPIO_41"),
>> +	PINCTRL_PIN(42, "GPIO_42"),
>> +	PINCTRL_PIN(43, "GPIO_43"),
>> +	PINCTRL_PIN(44, "GPIO_44"),
>> +	PINCTRL_PIN(45, "GPIO_45"),
>> +	PINCTRL_PIN(46, "GPIO_46"),
>> +	PINCTRL_PIN(47, "GPIO_47"),
>> +	PINCTRL_PIN(48, "GPIO_48"),
>> +	PINCTRL_PIN(49, "GPIO_49"),
>> +	PINCTRL_PIN(50, "GPIO_50"),
>> +	PINCTRL_PIN(51, "GPIO_51"),
>> +	PINCTRL_PIN(52, "GPIO_52"),
>> +	PINCTRL_PIN(53, "GPIO_53"),
>> +	PINCTRL_PIN(54, "GPIO_54"),
>> +	PINCTRL_PIN(55, "GPIO_55"),
>> +	PINCTRL_PIN(56, "GPIO_56"),
>> +	PINCTRL_PIN(57, "GPIO_57"),
>> +	PINCTRL_PIN(58, "GPIO_58"),
>> +	PINCTRL_PIN(59, "GPIO_59"),
>> +	PINCTRL_PIN(60, "GPIO_60"),
>> +	PINCTRL_PIN(61, "GPIO_61"),
>> +	PINCTRL_PIN(62, "GPIO_62"),
>> +	PINCTRL_PIN(63, "GPIO_63"),
>> +	PINCTRL_PIN(64, "GPIO_64"),
>> +	PINCTRL_PIN(65, "GPIO_65"),
>> +	PINCTRL_PIN(66, "GPIO_66"),
>> +	PINCTRL_PIN(67, "GPIO_67"),
>> +	PINCTRL_PIN(68, "GPIO_68"),
>> +	PINCTRL_PIN(69, "GPIO_69"),
>> +	PINCTRL_PIN(70, "GPIO_70"),
>> +	PINCTRL_PIN(71, "GPIO_71"),
>> +	PINCTRL_PIN(72, "GPIO_72"),
>> +	PINCTRL_PIN(73, "GPIO_73"),
>> +	PINCTRL_PIN(74, "GPIO_74"),
>> +	PINCTRL_PIN(75, "GPIO_75"),
>> +	PINCTRL_PIN(76, "GPIO_76"),
>> +	PINCTRL_PIN(77, "GPIO_77"),
>> +	PINCTRL_PIN(78, "GPIO_78"),
>> +	PINCTRL_PIN(79, "GPIO_79"),
>> +	PINCTRL_PIN(80, "GPIO_80"),
>> +	PINCTRL_PIN(81, "GPIO_81"),
>> +	PINCTRL_PIN(82, "GPIO_82"),
>> +	PINCTRL_PIN(83, "GPIO_83"),
>> +	PINCTRL_PIN(84, "GPIO_84"),
>> +	PINCTRL_PIN(85, "GPIO_85"),
>> +	PINCTRL_PIN(86, "GPIO_86"),
>> +	PINCTRL_PIN(87, "GPIO_87"),
>> +	PINCTRL_PIN(88, "GPIO_88"),
>> +	PINCTRL_PIN(89, "GPIO_89"),
>> +	PINCTRL_PIN(90, "GPIO_90"),
>> +	PINCTRL_PIN(91, "GPIO_91"),
>> +	PINCTRL_PIN(92, "GPIO_92"),
>> +	PINCTRL_PIN(93, "GPIO_93"),
>> +	PINCTRL_PIN(94, "GPIO_94"),
>> +	PINCTRL_PIN(95, "GPIO_95"),
>> +	PINCTRL_PIN(96, "GPIO_96"),
>> +	PINCTRL_PIN(97, "GPIO_97"),
>> +	PINCTRL_PIN(98, "GPIO_98"),
>> +	PINCTRL_PIN(99, "GPIO_99"),
>> +	PINCTRL_PIN(100, "GPIO_100"),
>> +	PINCTRL_PIN(101, "GPIO_101"),
>> +	PINCTRL_PIN(102, "GPIO_102"),
>> +	PINCTRL_PIN(103, "GPIO_103"),
>> +	PINCTRL_PIN(104, "GPIO_104"),
>> +	PINCTRL_PIN(105, "GPIO_105"),
>> +	PINCTRL_PIN(106, "GPIO_106"),
>> +	PINCTRL_PIN(107, "GPIO_107"),
>> +	PINCTRL_PIN(108, "GPIO_108"),
>> +	PINCTRL_PIN(109, "GPIO_109"),
>> +	PINCTRL_PIN(110, "GPIO_110"),
>> +	PINCTRL_PIN(111, "GPIO_111"),
>> +	PINCTRL_PIN(112, "GPIO_112"),
>> +	PINCTRL_PIN(113, "GPIO_113"),
>> +	PINCTRL_PIN(114, "SDC1_CLK"),
>> +	PINCTRL_PIN(115, "SDC1_CMD"),
>> +	PINCTRL_PIN(116, "SDC1_DATA"),
>> +	PINCTRL_PIN(117, "SDC2_CLK"),
>> +	PINCTRL_PIN(118, "SDC2_CMD"),
>> +	PINCTRL_PIN(119, "SDC2_DATA"),
>> +	PINCTRL_PIN(120, "SDC1_RCLK"),
>> +};
>> +
>> +#define DECLARE_MSM_GPIO_PINS(pin) \
>> +	static const unsigned int gpio##pin##_pins[] = { pin }
>> +DECLARE_MSM_GPIO_PINS(0);
>> +DECLARE_MSM_GPIO_PINS(1);
>> +DECLARE_MSM_GPIO_PINS(2);
>> +DECLARE_MSM_GPIO_PINS(3);
>> +DECLARE_MSM_GPIO_PINS(4);
>> +DECLARE_MSM_GPIO_PINS(5);
>> +DECLARE_MSM_GPIO_PINS(6);
>> +DECLARE_MSM_GPIO_PINS(7);
>> +DECLARE_MSM_GPIO_PINS(8);
>> +DECLARE_MSM_GPIO_PINS(9);
>> +DECLARE_MSM_GPIO_PINS(10);
>> +DECLARE_MSM_GPIO_PINS(11);
>> +DECLARE_MSM_GPIO_PINS(12);
>> +DECLARE_MSM_GPIO_PINS(13);
>> +DECLARE_MSM_GPIO_PINS(14);
>> +DECLARE_MSM_GPIO_PINS(15);
>> +DECLARE_MSM_GPIO_PINS(16);
>> +DECLARE_MSM_GPIO_PINS(17);
>> +DECLARE_MSM_GPIO_PINS(18);
>> +DECLARE_MSM_GPIO_PINS(19);
>> +DECLARE_MSM_GPIO_PINS(20);
>> +DECLARE_MSM_GPIO_PINS(21);
>> +DECLARE_MSM_GPIO_PINS(22);
>> +DECLARE_MSM_GPIO_PINS(23);
>> +DECLARE_MSM_GPIO_PINS(24);
>> +DECLARE_MSM_GPIO_PINS(25);
>> +DECLARE_MSM_GPIO_PINS(26);
>> +DECLARE_MSM_GPIO_PINS(27);
>> +DECLARE_MSM_GPIO_PINS(28);
>> +DECLARE_MSM_GPIO_PINS(29);
>> +DECLARE_MSM_GPIO_PINS(30);
>> +DECLARE_MSM_GPIO_PINS(31);
>> +DECLARE_MSM_GPIO_PINS(32);
>> +DECLARE_MSM_GPIO_PINS(33);
>> +DECLARE_MSM_GPIO_PINS(34);
>> +DECLARE_MSM_GPIO_PINS(35);
>> +DECLARE_MSM_GPIO_PINS(36);
>> +DECLARE_MSM_GPIO_PINS(37);
>> +DECLARE_MSM_GPIO_PINS(38);
>> +DECLARE_MSM_GPIO_PINS(39);
>> +DECLARE_MSM_GPIO_PINS(40);
>> +DECLARE_MSM_GPIO_PINS(41);
>> +DECLARE_MSM_GPIO_PINS(42);
>> +DECLARE_MSM_GPIO_PINS(43);
>> +DECLARE_MSM_GPIO_PINS(44);
>> +DECLARE_MSM_GPIO_PINS(45);
>> +DECLARE_MSM_GPIO_PINS(46);
>> +DECLARE_MSM_GPIO_PINS(47);
>> +DECLARE_MSM_GPIO_PINS(48);
>> +DECLARE_MSM_GPIO_PINS(49);
>> +DECLARE_MSM_GPIO_PINS(50);
>> +DECLARE_MSM_GPIO_PINS(51);
>> +DECLARE_MSM_GPIO_PINS(52);
>> +DECLARE_MSM_GPIO_PINS(53);
>> +DECLARE_MSM_GPIO_PINS(54);
>> +DECLARE_MSM_GPIO_PINS(55);
>> +DECLARE_MSM_GPIO_PINS(56);
>> +DECLARE_MSM_GPIO_PINS(57);
>> +DECLARE_MSM_GPIO_PINS(58);
>> +DECLARE_MSM_GPIO_PINS(59);
>> +DECLARE_MSM_GPIO_PINS(60);
>> +DECLARE_MSM_GPIO_PINS(61);
>> +DECLARE_MSM_GPIO_PINS(62);
>> +DECLARE_MSM_GPIO_PINS(63);
>> +DECLARE_MSM_GPIO_PINS(64);
>> +DECLARE_MSM_GPIO_PINS(65);
>> +DECLARE_MSM_GPIO_PINS(66);
>> +DECLARE_MSM_GPIO_PINS(67);
>> +DECLARE_MSM_GPIO_PINS(68);
>> +DECLARE_MSM_GPIO_PINS(69);
>> +DECLARE_MSM_GPIO_PINS(70);
>> +DECLARE_MSM_GPIO_PINS(71);
>> +DECLARE_MSM_GPIO_PINS(72);
>> +DECLARE_MSM_GPIO_PINS(73);
>> +DECLARE_MSM_GPIO_PINS(74);
>> +DECLARE_MSM_GPIO_PINS(75);
>> +DECLARE_MSM_GPIO_PINS(76);
>> +DECLARE_MSM_GPIO_PINS(77);
>> +DECLARE_MSM_GPIO_PINS(78);
>> +DECLARE_MSM_GPIO_PINS(79);
>> +DECLARE_MSM_GPIO_PINS(80);
>> +DECLARE_MSM_GPIO_PINS(81);
>> +DECLARE_MSM_GPIO_PINS(82);
>> +DECLARE_MSM_GPIO_PINS(83);
>> +DECLARE_MSM_GPIO_PINS(84);
>> +DECLARE_MSM_GPIO_PINS(85);
>> +DECLARE_MSM_GPIO_PINS(86);
>> +DECLARE_MSM_GPIO_PINS(87);
>> +DECLARE_MSM_GPIO_PINS(88);
>> +DECLARE_MSM_GPIO_PINS(89);
>> +DECLARE_MSM_GPIO_PINS(90);
>> +DECLARE_MSM_GPIO_PINS(91);
>> +DECLARE_MSM_GPIO_PINS(92);
>> +DECLARE_MSM_GPIO_PINS(93);
>> +DECLARE_MSM_GPIO_PINS(94);
>> +DECLARE_MSM_GPIO_PINS(95);
>> +DECLARE_MSM_GPIO_PINS(96);
>> +DECLARE_MSM_GPIO_PINS(97);
>> +DECLARE_MSM_GPIO_PINS(98);
>> +DECLARE_MSM_GPIO_PINS(99);
>> +DECLARE_MSM_GPIO_PINS(100);
>> +DECLARE_MSM_GPIO_PINS(101);
>> +DECLARE_MSM_GPIO_PINS(102);
>> +DECLARE_MSM_GPIO_PINS(103);
>> +DECLARE_MSM_GPIO_PINS(104);
>> +DECLARE_MSM_GPIO_PINS(105);
>> +DECLARE_MSM_GPIO_PINS(106);
>> +DECLARE_MSM_GPIO_PINS(107);
>> +DECLARE_MSM_GPIO_PINS(108);
>> +DECLARE_MSM_GPIO_PINS(109);
>> +DECLARE_MSM_GPIO_PINS(110);
>> +DECLARE_MSM_GPIO_PINS(111);
>> +DECLARE_MSM_GPIO_PINS(112);
>> +DECLARE_MSM_GPIO_PINS(113);
>> +
>> +static const unsigned int sdc1_clk_pins[] = { 114 };
>> +static const unsigned int sdc1_cmd_pins[] = { 115 };
>> +static const unsigned int sdc1_data_pins[] = { 116 };
>> +static const unsigned int sdc2_clk_pins[] = { 117 };
>> +static const unsigned int sdc2_cmd_pins[] = { 118 };
>> +static const unsigned int sdc2_data_pins[] = { 119 };
>> +static const unsigned int sdc1_rclk_pins[] = { 120 };
>> +
>> +enum sdm660_functions {
>> +	msm_mux_blsp_spi1,
>> +	msm_mux_gpio,
>> +	msm_mux_blsp_uim1,
>> +	msm_mux_tgu_ch0,
>> +	msm_mux_qdss_gpio4,
>> +	msm_mux_atest_gpsadc1,
>> +	msm_mux_blsp_uart1,
>> +	msm_mux_phase_flag14,
>> +	msm_mux_blsp_i2c2,
>> +	msm_mux_phase_flag31,
>> +	msm_mux_blsp_spi3,
>> +	msm_mux_blsp_spi3_cs1,
>> +	msm_mux_blsp_spi3_cs2,
>> +	msm_mux_wlan1_adc1,
>> +	msm_mux_atest_usb13,
>> +	msm_mux_tgu_ch1,
>> +	msm_mux_qdss_gpio5,
>> +	msm_mux_atest_gpsadc0,
>> +	msm_mux_blsp_i2c1,
>> +	msm_mux_ddr_bist,
>> +	msm_mux_atest_tsens2,
>> +	msm_mux_atest_usb1,
>> +	msm_mux_blsp_spi2,
>> +	msm_mux_blsp_uim2,
>> +	msm_mux_phase_flag3,
>> +	msm_mux_bimc_dte1,
>> +	msm_mux_wlan1_adc0,
>> +	msm_mux_atest_usb12,
>> +	msm_mux_bimc_dte0,
>> +	msm_mux_blsp_i2c3,
>> +	msm_mux_wlan2_adc1,
>> +	msm_mux_atest_usb11,
>> +	msm_mux_dbg_out,
>> +	msm_mux_wlan2_adc0,
>> +	msm_mux_atest_usb10,
>> +	msm_mux_blsp_spi4,
>> +	msm_mux_pri_mi2s,
>> +	msm_mux_phase_flag26,
>> +	msm_mux_qdss_cti0_a,
>> +	msm_mux_qdss_cti0_b,
>> +	msm_mux_qdss_cti1_a,
>> +	msm_mux_qdss_cti1_b,
>> +	msm_mux_pri_mi2s_ws,
>> +	msm_mux_phase_flag27,
>> +	msm_mux_blsp_i2c4,
>> +	msm_mux_phase_flag28,
>> +	msm_mux_blsp_uart5,
>> +	msm_mux_blsp_spi5,
>> +	msm_mux_blsp_uim5,
>> +	msm_mux_phase_flag5,
>> +	msm_mux_blsp_i2c5,
>> +	msm_mux_blsp_spi6,
>> +	msm_mux_blsp_uart2,
>> +	msm_mux_blsp_uim6,
>> +	msm_mux_phase_flag11,
>> +	msm_mux_vsense_data0,
>> +	msm_mux_blsp_i2c6,
>> +	msm_mux_phase_flag12,
>> +	msm_mux_vsense_data1,
>> +	msm_mux_phase_flag13,
>> +	msm_mux_vsense_mode,
>> +	msm_mux_blsp_spi7,
>> +	msm_mux_blsp_uart6_a,
>> +	msm_mux_blsp_uart6_b,
>> +	msm_mux_sec_mi2s,
>> +	msm_mux_sndwire_clk,
>> +	msm_mux_phase_flag17,
>> +	msm_mux_vsense_clkout,
>> +	msm_mux_sndwire_data,
>> +	msm_mux_phase_flag18,
>> +	msm_mux_blsp_i2c7,
>> +	msm_mux_phase_flag19,
>> +	msm_mux_vfr_1,
>> +	msm_mux_phase_flag20,
>> +	msm_mux_blsp_spi8_cs1,
>> +	msm_mux_blsp_spi8_cs2,
>> +	msm_mux_m_voc,
>> +	msm_mux_phase_flag21,
>> +	msm_mux_phase_flag22,
>> +	msm_mux_blsp_i2c8_a,
>> +	msm_mux_blsp_i2c8_b,
>> +	msm_mux_phase_flag23,
>> +	msm_mux_pwr_modem,
>> +	msm_mux_phase_flag24,
>> +	msm_mux_qdss_gpio,
>> +	msm_mux_cam_mclk,
>> +	msm_mux_pwr_nav,
>> +	msm_mux_qdss_gpio0,
>> +	msm_mux_qspi_data0,
>> +	msm_mux_pwr_crypto,
>> +	msm_mux_qdss_gpio1,
>> +	msm_mux_qspi_data1,
>> +	msm_mux_agera_pll,
>> +	msm_mux_qdss_gpio2,
>> +	msm_mux_qspi_data2,
>> +	msm_mux_jitter_bist,
>> +	msm_mux_qdss_gpio3,
>> +	msm_mux_qdss_gpio7,
>> +	msm_mux_mdss_vsync0,
>> +	msm_mux_mdss_vsync1,
>> +	msm_mux_mdss_vsync2,
>> +	msm_mux_mdss_vsync3,
>> +	msm_mux_qdss_gpio9,
>> +	msm_mux_atest_usb2,
>> +	msm_mux_cci_i2c,
>> +	msm_mux_pll_bypassnl,
>> +	msm_mux_atest_tsens,
>> +	msm_mux_atest_usb21,
>> +	msm_mux_pll_reset,
>> +	msm_mux_atest_usb23,
>> +	msm_mux_qdss_gpio6,
>> +	msm_mux_qspi_cs,
>> +	msm_mux_qdss_gpio10,
>> +	msm_mux_qdss_gpio11,
>> +	msm_mux_cci_async,
>> +	msm_mux_qdss_gpio12,
>> +	msm_mux_qdss_gpio13,
>> +	msm_mux_qspi_clk,
>> +	msm_mux_phase_flag30,
>> +	msm_mux_qdss_gpio14,
>> +	msm_mux_qspi_resetn,
>> +	msm_mux_phase_flag1,
>> +	msm_mux_qdss_gpio15,
>> +	msm_mux_phase_flag2,
>> +	msm_mux_phase_flag9,
>> +	msm_mux_qspi_data3,
>> +	msm_mux_phase_flag15,
>> +	msm_mux_qdss_gpio8,
>> +	msm_mux_phase_flag16,
>> +	msm_mux_phase_flag6,
>> +	msm_mux_phase_flag29,
>> +	msm_mux_phase_flag25,
>> +	msm_mux_phase_flag10,
>> +	msm_mux_atest_usb20,
>> +	msm_mux_gcc_gp1,
>> +	msm_mux_phase_flag4,
>> +	msm_mux_atest_usb22,
>> +	msm_mux_gcc_gp2,
>> +	msm_mux_atest_char,
>> +	msm_mux_mdp_vsync,
>> +	msm_mux_gcc_gp3,
>> +	msm_mux_atest_char3,
>> +	msm_mux_cri_trng0,
>> +	msm_mux_atest_char2,
>> +	msm_mux_cri_trng1,
>> +	msm_mux_atest_char1,
>> +	msm_mux_audio_ref,
>> +	msm_mux_cri_trng,
>> +	msm_mux_atest_char0,
>> +	msm_mux_blsp_spi8_a,
>> +	msm_mux_blsp_spi8_b,
>> +	msm_mux_sp_cmu,
>> +	msm_mux_nav_pps_a,
>> +	msm_mux_nav_pps_b,
>> +	msm_mux_nav_pps_c,
>> +	msm_mux_gps_tx_a,
>> +	msm_mux_gps_tx_b,
>> +	msm_mux_gps_tx_c,
>> +	msm_mux_adsp_ext,
>> +	msm_mux_ssc_irq,
>> +	msm_mux_isense_dbg,
>> +	msm_mux_phase_flag0,
>> +	msm_mux_phase_flag7,
>> +	msm_mux_phase_flag8,
>> +	msm_mux_tsense_pwm1,
>> +	msm_mux_tsense_pwm2,
>> +	msm_mux_mss_lte,
>> +	msm_mux_uim2_data,
>> +	msm_mux_uim2_clk,
>> +	msm_mux_uim2_reset,
>> +	msm_mux_uim2_present,
>> +	msm_mux_uim1_data,
>> +	msm_mux_uim1_clk,
>> +	msm_mux_uim1_reset,
>> +	msm_mux_uim1_present,
>> +	msm_mux_uim_batt,
>> +	msm_mux_pa_indicator,
>> +	msm_mux_ldo_en,
>> +	msm_mux_ldo_update,
>> +	msm_mux_qlink_request,
>> +	msm_mux_qlink_enable,
>> +	msm_mux_prng_rosc,
>> +	msm_mux__,
>> +};
>> +
>> +static const char * const gpio_groups[] = {
>> +	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6",
>"gpio7",
>> +	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
>> +	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20",
>"gpio21",
>> +	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27",
>"gpio28",
>> +	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34",
>"gpio35",
>> +	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41",
>"gpio42",
>> +	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48",
>"gpio49",
>> +	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55",
>"gpio56",
>> +	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62",
>"gpio63",
>> +	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69",
>"gpio70",
>> +	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76",
>"gpio77",
>> +	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83",
>"gpio84",
>> +	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90",
>"gpio91",
>> +	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97",
>"gpio98",
>> +	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
>> +	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
>> +	"gpio111", "gpio112", "gpio113",
>> +};
>> +static const char * const blsp_spi1_groups[] = {
>> +	"gpio0", "gpio1", "gpio2", "gpio3", "gpio46",
>> +};
>> +static const char * const blsp_uim1_groups[] = {
>> +	"gpio0", "gpio1",
>> +};
>> +static const char * const tgu_ch0_groups[] = {
>> +	"gpio0",
>> +};
>> +static const char * const qdss_gpio4_groups[] = {
>> +	"gpio0", "gpio36",
>> +};
>> +static const char * const atest_gpsadc1_groups[] = {
>> +	"gpio0",
>> +};
>> +static const char * const blsp_uart1_groups[] = {
>> +	"gpio0", "gpio1", "gpio2", "gpio3",
>> +};
>> +static const char * const phase_flag14_groups[] = {
>> +	"gpio5",
>> +};
>> +static const char * const blsp_i2c2_groups[] = {
>> +	"gpio6", "gpio7",
>> +};
>> +static const char * const phase_flag31_groups[] = {
>> +	"gpio6",
>> +};
>> +static const char * const blsp_spi3_groups[] = {
>> +	"gpio8", "gpio9", "gpio10", "gpio11",
>> +};
>> +static const char * const blsp_spi3_cs1_groups[] = {
>> +	"gpio30",
>> +};
>> +static const char * const blsp_spi3_cs2_groups[] = {
>> +	"gpio65",
>> +};
>> +static const char * const wlan1_adc1_groups[] = {
>> +	"gpio8",
>> +};
>> +static const char * const atest_usb13_groups[] = {
>> +	"gpio8",
>> +};
>> +static const char * const tgu_ch1_groups[] = {
>> +	"gpio1",
>> +};
>> +static const char * const qdss_gpio5_groups[] = {
>> +	"gpio1", "gpio37",
>> +};
>> +static const char * const atest_gpsadc0_groups[] = {
>> +	"gpio1",
>> +};
>> +static const char * const blsp_i2c1_groups[] = {
>> +	"gpio2", "gpio3",
>> +};
>> +static const char * const ddr_bist_groups[] = {
>> +	"gpio3", "gpio8", "gpio9", "gpio10",
>> +};
>> +static const char * const atest_tsens2_groups[] = {
>> +	"gpio3",
>> +};
>> +static const char * const atest_usb1_groups[] = {
>> +	"gpio3",
>> +};
>> +static const char * const blsp_spi2_groups[] = {
>> +	"gpio4", "gpio5", "gpio6", "gpio7",
>> +};
>> +static const char * const blsp_uim2_groups[] = {
>> +	"gpio4", "gpio5",
>> +};
>> +static const char * const phase_flag3_groups[] = {
>> +	"gpio4",
>> +};
>> +static const char * const bimc_dte1_groups[] = {
>> +	"gpio8", "gpio10",
>> +};
>> +static const char * const wlan1_adc0_groups[] = {
>> +	"gpio9",
>> +};
>> +static const char * const atest_usb12_groups[] = {
>> +	"gpio9",
>> +};
>> +static const char * const bimc_dte0_groups[] = {
>> +	"gpio9", "gpio11",
>> +};
>> +static const char * const blsp_i2c3_groups[] = {
>> +	"gpio10", "gpio11",
>> +};
>> +static const char * const wlan2_adc1_groups[] = {
>> +	"gpio10",
>> +};
>> +static const char * const atest_usb11_groups[] = {
>> +	"gpio10",
>> +};
>> +static const char * const dbg_out_groups[] = {
>> +	"gpio11",
>> +};
>> +static const char * const wlan2_adc0_groups[] = {
>> +	"gpio11",
>> +};
>> +static const char * const atest_usb10_groups[] = {
>> +	"gpio11",
>> +};
>> +static const char * const RCM_MARKER_groups[] = {
>> +	"gpio12", "gpio13",
>> +};
>> +static const char * const blsp_spi4_groups[] = {
>> +	"gpio12", "gpio13", "gpio14", "gpio15",
>> +};
>> +static const char * const pri_mi2s_groups[] = {
>> +	"gpio12", "gpio14", "gpio15", "gpio61",
>> +};
>> +static const char * const phase_flag26_groups[] = {
>> +	"gpio12",
>> +};
>> +static const char * const qdss_cti0_a_groups[] = {
>> +	"gpio49", "gpio50",
>> +};
>> +static const char * const qdss_cti0_b_groups[] = {
>> +	"gpio13", "gpio21",
>> +};
>> +static const char * const qdss_cti1_a_groups[] = {
>> +	"gpio53", "gpio55",
>> +};
>> +static const char * const qdss_cti1_b_groups[] = {
>> +	"gpio12", "gpio66",
>> +};
>> +static const char * const pri_mi2s_ws_groups[] = {
>> +	"gpio13",
>> +};
>> +static const char * const phase_flag27_groups[] = {
>> +	"gpio13",
>> +};
>> +static const char * const blsp_i2c4_groups[] = {
>> +	"gpio14", "gpio15",
>> +};
>> +static const char * const phase_flag28_groups[] = {
>> +	"gpio14",
>> +};
>> +static const char * const blsp_uart5_groups[] = {
>> +	"gpio16", "gpio17", "gpio18", "gpio19",
>> +};
>> +static const char * const blsp_spi5_groups[] = {
>> +	"gpio16", "gpio17", "gpio18", "gpio19",
>> +};
>> +static const char * const blsp_uim5_groups[] = {
>> +	"gpio16", "gpio17",
>> +};
>> +static const char * const phase_flag5_groups[] = {
>> +	"gpio17",
>> +};
>> +static const char * const blsp_i2c5_groups[] = {
>> +	"gpio18", "gpio19",
>> +};
>> +static const char * const blsp_spi6_groups[] = {
>> +	"gpio49", "gpio52", "gpio22", "gpio23",
>> +};
>> +static const char * const blsp_uart2_groups[] = {
>> +	"gpio4", "gpio5", "gpio6", "gpio7",
>> +};
>> +static const char * const blsp_uim6_groups[] 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

[-- Attachment #2: Type: text/html, Size: 34766 bytes --]