* [PATCH v4 1/4] remoteproc: qcom: qcom_wcnss: Add support for pronto-v3
2022-09-21 4:36 [PATCH v4 0/4] remoteproc: qcom: Add support for pronto-v3 Sireesh Kodali
@ 2022-09-21 4:36 ` Sireesh Kodali
2022-09-21 4:36 ` [PATCH v4 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML Sireesh Kodali
` (2 subsequent siblings)
3 siblings, 0 replies; 12+ messages in thread
From: Sireesh Kodali @ 2022-09-21 4:36 UTC (permalink / raw)
To: devicetree, linux-arm-msm, linux-remoteproc,
~postmarketos/upstreaming, linux-kernel
Cc: andersson, krzysztof.kozlowski+dt, Vladimir Lypak, Sireesh Kodali,
Andy Gross, Bjorn Andersson, Konrad Dybcio, Mathieu Poirier
From: Vladimir Lypak <vladimir.lypak@gmail.com>
Pronto-v3 is similar to pronto-v2. It requires two power domains, and it
requires the xo clock. It is used on the MSM8953 platform.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
drivers/remoteproc/qcom_wcnss.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 68f37296b151..ff18bfae5eb6 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -141,6 +141,18 @@ static const struct wcnss_data pronto_v2_data = {
.num_vregs = 1,
};
+static const struct wcnss_data pronto_v3_data = {
+ .pmu_offset = 0x1004,
+ .spare_offset = 0x1088,
+
+ .pd_names = { "mx", "cx" },
+ .vregs = (struct wcnss_vreg_info[]) {
+ { "vddpx", 1800000, 1800000, 0 },
+ },
+ .num_pd_vregs = 2,
+ .num_vregs = 1,
+};
+
static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
{
struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
@@ -675,6 +687,7 @@ static const struct of_device_id wcnss_of_match[] = {
{ .compatible = "qcom,riva-pil", &riva_data },
{ .compatible = "qcom,pronto-v1-pil", &pronto_v1_data },
{ .compatible = "qcom,pronto-v2-pil", &pronto_v2_data },
+ { .compatible = "qcom,pronto-v3-pil", &pronto_v3_data },
{ },
};
MODULE_DEVICE_TABLE(of, wcnss_of_match);
--
2.37.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML
2022-09-21 4:36 [PATCH v4 0/4] remoteproc: qcom: Add support for pronto-v3 Sireesh Kodali
2022-09-21 4:36 ` [PATCH v4 1/4] remoteproc: qcom: qcom_wcnss: " Sireesh Kodali
@ 2022-09-21 4:36 ` Sireesh Kodali
2022-09-21 8:36 ` Krzysztof Kozlowski
2022-09-21 19:16 ` Krzysztof Kozlowski
2022-09-21 4:36 ` [PATCH v4 3/4] dt-bindings: remoteproc: qcom: wcnss: Add qcom,pronto compatible Sireesh Kodali
2022-09-21 4:36 ` [PATCH v4 4/4] dt-bindings: remoteproc: qcom: wcnss: Add compatible for pronto v3 Sireesh Kodali
3 siblings, 2 replies; 12+ messages in thread
From: Sireesh Kodali @ 2022-09-21 4:36 UTC (permalink / raw)
To: devicetree, linux-arm-msm, linux-remoteproc,
~postmarketos/upstreaming, linux-kernel
Cc: andersson, krzysztof.kozlowski+dt, Sireesh Kodali, Andy Gross,
Bjorn Andersson, Konrad Dybcio, Mathieu Poirier, Rob Herring
This is a direct conversion of the existing txt documentation to YAML.
It is in preparation for the addition of pronto-v3 to the docs. This
patch doesn't document any of the existing subnodes/properties that are
not documented in the existing txt file. That is done in a separate
patch.
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
.../bindings/remoteproc/qcom,wcnss-pil.txt | 177 ------------
.../bindings/remoteproc/qcom,wcnss-pil.yaml | 267 ++++++++++++++++++
2 files changed, 267 insertions(+), 177 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
deleted file mode 100644
index ac423f4c3f1b..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
+++ /dev/null
@@ -1,177 +0,0 @@
-Qualcomm WCNSS Peripheral Image Loader
-
-This document defines the binding for a component that loads and boots firmware
-on the Qualcomm WCNSS core.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,riva-pil",
- "qcom,pronto-v1-pil",
- "qcom,pronto-v2-pil"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must specify the base address and size of the CCU, DXE and
- PMU register blocks
-
-- reg-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "ccu", "dxe", "pmu"
-
-- interrupts-extended:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: must list the watchdog and fatal IRQs and may specify the
- ready, handover and stop-ack IRQs
-
-- interrupt-names:
- Usage: required
- Value type: <stringlist>
- Definition: should be "wdog", "fatal", optionally followed by "ready",
- "handover", "stop-ack"
-
-- firmware-name:
- Usage: optional
- Value type: <string>
- Definition: must list the relative firmware image path for the
- WCNSS core. Defaults to "wcnss.mdt".
-
-- vddmx-supply: (deprecated for qcom,pronto-v1/2-pil)
-- vddcx-supply: (deprecated for qcom,pronto-v1/2-pil)
-- vddpx-supply:
- Usage: required
- Value type: <phandle>
- Definition: reference to the regulators to be held on behalf of the
- booting of the WCNSS core
-
-- power-domains:
- Usage: required (for qcom,pronto-v1/2-pil)
- Value type: <phandle>
- Definition: reference to the power domains to be held on behalf of the
- booting of the WCNSS core
-
-- power-domain-names:
- Usage: required (for qcom,pronto-v1/2-pil)
- Value type: <stringlist>
- Definition: must be "cx", "mx"
-
-- qcom,smem-states:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: reference to the SMEM state used to indicate to WCNSS that
- it should shut down
-
-- qcom,smem-state-names:
- Usage: optional
- Value type: <stringlist>
- Definition: should be "stop"
-
-- memory-region:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: reference to reserved-memory node for the remote processor
- see ../reserved-memory/reserved-memory.txt
-
-= SUBNODES
-A required subnode of the WCNSS PIL is used to describe the attached rf module
-and its resource dependencies. It is described by the following properties:
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,wcn3620",
- "qcom,wcn3660",
- "qcom,wcn3660b",
- "qcom,wcn3680"
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the xo clock and optionally the rf clock
-
-- clock-names:
- Usage: required
- Value type: <stringlist>
- Definition: should be "xo", optionally followed by "rf"
-
-- vddxo-supply:
-- vddrfa-supply:
-- vddpa-supply:
-- vdddig-supply:
- Usage: required
- Value type: <phandle>
- Definition: reference to the regulators to be held on behalf of the
- booting of the WCNSS core
-
-
-The wcnss node can also have an subnode named "smd-edge" that describes the SMD
-edge, channels and devices related to the WCNSS.
-See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge.
-
-= EXAMPLE
-The following example describes the resources needed to boot control the WCNSS,
-with attached WCN3680, as it is commonly found on MSM8974 boards.
-
-pronto@fb204000 {
- compatible = "qcom,pronto-v2-pil";
- reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
- reg-names = "ccu", "dxe", "pmu";
-
- interrupts-extended = <&intc 0 149 1>,
- <&wcnss_smp2p_slave 0 0>,
- <&wcnss_smp2p_slave 1 0>,
- <&wcnss_smp2p_slave 2 0>,
- <&wcnss_smp2p_slave 3 0>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- power-domains = <&rpmpd MSM8974_VDDCX>, <&rpmpd MSM8974_VDDMX>;
- power-domain-names = "cx", "mx";
-
- vddpx-supply = <&pm8941_s3>;
-
- qcom,smem-states = <&wcnss_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- memory-region = <&wcnss_region>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&wcnss_pin_a>;
-
- iris {
- compatible = "qcom,wcn3680";
-
- clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>;
- clock-names = "xo", "rf";
-
- vddxo-supply = <&pm8941_l6>;
- vddrfa-supply = <&pm8941_l11>;
- vddpa-supply = <&pm8941_l19>;
- vdddig-supply = <&pm8941_s3>;
- };
-
- smd-edge {
- interrupts = <0 142 1>;
-
- qcom,ipc = <&apcs 8 17>;
- qcom,smd-edge = <6>;
- qcom,remote-pid = <4>;
-
- label = "pronto";
-
- wcnss {
- compatible = "qcom,wcnss";
- qcom,smd-channels = "WCNSS_CTRL";
-
- qcom,mmio = <&pronto>;
-
- bt {
- compatible = "qcom,wcnss-bt";
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
new file mode 100644
index 000000000000..a99a1e5242f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,wcnss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCNSS Peripheral Image Loader
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ This document defines the binding for a component that loads and boots
+ firmware on the Qualcomm WCNSS core.
+
+properties:
+ compatible:
+ enum:
+ - qcom,riva-pil
+ - qcom,pronto-v1-pil
+ - qcom,pronto-v2-pil
+
+ reg:
+ maxItems: 3
+ description:
+ The base address and size of the CCU, DXE and PMU register blocks
+
+ reg-names:
+ items:
+ - const: ccu
+ - const: dxe
+ - const: pmu
+
+ interrupts:
+ minItems: 2
+ maxItems: 5
+
+ interrupt-names:
+ minItems: 2
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Relative firmware image path for the WCNSS core. Defaults to
+ "wcnss.mdt".
+
+ vddpx-supply:
+ description:
+ PX regulator to be held on behalf of the booting of the WCNSS core
+
+ vddmx-supply:
+ description:
+ MX regulator to be held on behalf of the booting of the WCNSS core.
+
+ vddcx-supply:
+ description:
+ CX regulator to be held on behalf of the booting of the WCNSS core.
+
+ power-domains:
+ maxItems: 2
+
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mx
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ States used by the AP to signal the WCNSS core that it should shutdown
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output
+ items:
+ - const: stop
+
+ memory-region:
+ maxItems: 1
+ description: reserved-memory for the WCNSS core
+
+ smd-edge:
+ $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+ description:
+ Qualcomm Shared Memory subnode which represents communication edge,
+ channels and devices related to the ADSP.
+
+ iris:
+ type: object
+ description:
+ The iris subnode of the WCNSS PIL is used to describe the attached RF module
+ and its resource dependencies.
+
+ properties:
+ compatible:
+ enum:
+ - qcom,wcn3620
+ - qcom,wcn3660
+ - qcom,wcn3660b
+ - qcom,wcn3680
+
+ clocks:
+ minItems: 1
+ items:
+ - description: XO clock
+ - description: RF clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: xo
+ - const: rf
+
+ vddxo-supply:
+ description:
+ Reference to the regulator to be held on behalf of the booting WCNSS
+ core
+
+ vddrfa-supply:
+ description:
+ Reference to the regulator to be held on behalf of the booting WCNSS
+ core
+
+ vddpa-supply:
+ description:
+ Reference to the regulator to be held on behalf of the booting WCNSS
+ core
+
+ vdddig-supply:
+ description:
+ Reference to the regulator to be held on behalf of the booting WCNSS
+ core
+
+ required:
+ - compatible
+ - clocks
+ - clock-names
+ - vddxo-supply
+ - vddrfa-supply
+ - vddpa-supply
+ - vdddig-supply
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts-extended
+ - interrupt-names
+ - iris
+ - vddpx-supply
+ - memory-region
+ - smd-edge
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,riva-pil
+ then:
+ required:
+ - vddcx-supply
+ - vddmx-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pronto-v1-pil
+ - qcom,pronto-v2-pil
+ then:
+ properties:
+ vddmx-supply:
+ deprecated: true
+ description: Deprecated for qcom,pronto-v1/2-pil
+
+ vddcx-supply:
+ deprecated: true
+ description: Deprecated for qcom,pronto-v1/2-pil
+
+ required:
+ - power-domains
+ - power-domain-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ pronto@a21b000 {
+ compatible = "qcom,pronto-v2-pil";
+ reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ power-domains = <&rpmpd MSM8916_VDDCX>, <&rpmpd MSM8916_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ vddpx-supply = <&pm8916_l7>;
+
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ memory-region = <&wcnss_region>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
+
+ iris {
+ compatible = "qcom,wcn3620";
+ vddxo-supply = <&pm8916_l7>;
+ vddrfa-supply = <&pm8916_s3>;
+ vddpa-supply = <&pm8916_l9>;
+ vdddig-supply = <&pm8916_l5>;
+
+ clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+ clock-names = "xo";
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+ qcom,remote-pid = <4>;
+
+ label = "pronto";
+
+ wcnss_ctrl: wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&pronto>;
+
+ bluetooth {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
--
2.37.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 3/4] dt-bindings: remoteproc: qcom: wcnss: Add qcom,pronto compatible
2022-09-21 4:36 [PATCH v4 0/4] remoteproc: qcom: Add support for pronto-v3 Sireesh Kodali
2022-09-21 4:36 ` [PATCH v4 1/4] remoteproc: qcom: qcom_wcnss: " Sireesh Kodali
2022-09-21 4:36 ` [PATCH v4 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML Sireesh Kodali
@ 2022-09-21 4:36 ` Sireesh Kodali
2022-09-21 8:36 ` Krzysztof Kozlowski
2022-09-21 19:17 ` Krzysztof Kozlowski
2022-09-21 4:36 ` [PATCH v4 4/4] dt-bindings: remoteproc: qcom: wcnss: Add compatible for pronto v3 Sireesh Kodali
3 siblings, 2 replies; 12+ messages in thread
From: Sireesh Kodali @ 2022-09-21 4:36 UTC (permalink / raw)
To: devicetree, linux-arm-msm, linux-remoteproc,
~postmarketos/upstreaming, linux-kernel
Cc: andersson, krzysztof.kozlowski+dt, Sireesh Kodali, Andy Gross,
Bjorn Andersson, Konrad Dybcio, Mathieu Poirier, Rob Herring
This is not a fallback compatible, it must be present in addition to
"qcom,pronto-v*". It is also not documented in qcom,wcnss-pil.txt. This
is the reason for documenting it in a separate commit.
This compatible is used in the wcn36xx driver to determine which
register must be accessed. However it isn't immediately clear why the
wcn36xx driver relies on this extra compatible string rather than just
looking for "qcom,pronto-v*".
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
.../bindings/remoteproc/qcom,wcnss-pil.yaml | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
index a99a1e5242f8..31232c59b22b 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -15,10 +15,15 @@ description:
properties:
compatible:
- enum:
- - qcom,riva-pil
- - qcom,pronto-v1-pil
- - qcom,pronto-v2-pil
+ description:
+ Append "qcom,pronto" if the device is actually pronto, and not riva
+ oneOf:
+ - items:
+ - enum:
+ - qcom,pronto-v1-pil
+ - qcom,pronto-v2-pil
+ - const: qcom,pronto
+ - const: qcom,riva-pil
reg:
maxItems: 3
@@ -198,7 +203,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
pronto@a21b000 {
- compatible = "qcom,pronto-v2-pil";
+ compatible = "qcom,pronto-v2-pil", "qcom,pronto";
reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
reg-names = "ccu", "dxe", "pmu";
--
2.37.3
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 4/4] dt-bindings: remoteproc: qcom: wcnss: Add compatible for pronto v3
2022-09-21 4:36 [PATCH v4 0/4] remoteproc: qcom: Add support for pronto-v3 Sireesh Kodali
` (2 preceding siblings ...)
2022-09-21 4:36 ` [PATCH v4 3/4] dt-bindings: remoteproc: qcom: wcnss: Add qcom,pronto compatible Sireesh Kodali
@ 2022-09-21 4:36 ` Sireesh Kodali
2022-09-21 8:35 ` Krzysztof Kozlowski
2022-09-21 19:18 ` Krzysztof Kozlowski
3 siblings, 2 replies; 12+ messages in thread
From: Sireesh Kodali @ 2022-09-21 4:36 UTC (permalink / raw)
To: devicetree, linux-arm-msm, linux-remoteproc,
~postmarketos/upstreaming, linux-kernel
Cc: andersson, krzysztof.kozlowski+dt, Sireesh Kodali, Andy Gross,
Bjorn Andersson, Konrad Dybcio, Mathieu Poirier, Rob Herring
The pronto v3 remoteproc is similar to pronto v2. It is found on the
MSM8953 platform, which is used by SDM450, SDM625, SDM626, APQ8053 and
other SoCs. Since the configuration is same on all SoCs, a single
compatible is used.
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
.../bindings/remoteproc/qcom,wcnss-pil.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
index 31232c59b22b..639c52284f4f 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -22,6 +22,7 @@ properties:
- enum:
- qcom,pronto-v1-pil
- qcom,pronto-v2-pil
+ - qcom,pronto-v3-pil
- const: qcom,pronto
- const: qcom,riva-pil
@@ -197,6 +198,21 @@ allOf:
- power-domains
- power-domain-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pronto-v3-pil
+ then:
+ properties:
+ vddmx-supply: false
+ vddcx-supply: false
+
+ required:
+ - power-domains
+ - power-domain-names
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
--
2.37.3
^ permalink raw reply related [flat|nested] 12+ messages in thread