Re: [PATCH v1 1/4] dt-bindings: media: qcom: Add JPEG encoder binding

["Luca Weiss" <luca.weiss@fairphone.com>]

Hi Atanas,

On Fri Jun 12, 2026 at 9:44 PM CEST, Atanas Filipov wrote:
> Add device-tree binding for the standalone Qualcomm JPEG encoder
> hardware block (separate from CAMSS media pipelines).
>
> Document required resources briefly and scope initial support to
> currently used compatibles in this series, including SM8250,
> QCM6490, and SM8550 class platforms.
>
> Signed-off-by: Atanas Filipov <atanas.filipov@oss.qualcomm.com>
> ---
>  .../bindings/media/qcom,jpeg-encoder.yaml     | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/qcom,jpeg-encoder.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/qcom,jpeg-encoder.yaml
> new file mode 100644
> index 000000000000..83f19719a869
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,jpeg-encoder.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,jpeg-encoder.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm JPEG Encoder
> +
> +maintainers:
> +  - Azam Sadiq Pasha Kapatrala Syed <akapatra@quicinc.com>
> +  - Hariram Purushothaman <hariramp@quicinc.com>
> +
> +description: |
> +  Qualcomm JPEG Encoder is the JPEG encode hardware present in Qualcomm SoCs.
> +
> +  The JPEG hardware IP version 4.2.0 is shared across SM8250, QCM6490, SM8550
> +  and related derivatives.  Platforms based on the SM8550 register layout and
> +  interrupt wiring can reuse the qcom,sm8550-jenc fallback compatible, provided
> +  the correct register base address and IOMMU stream IDs are supplied in the
> +  DTS node.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: qcom,sm8250-jenc
> +      - items:
> +          - enum:
> +              - qcom,qcm6490-jenc

Any reason why here and in other places you specifically reference
qcm6490 instead of sc7280 which is what essentially any other compatible
and files for Kodiak is named after? It makes it sound like this is not
applicable to SC7280/SM7325 and *specific* to QCM6490 inside the Kodiak
family.

I supposed qcom,kodiak-jenc could also work but not sure we should
change up the naming scheme halfway.

Regards
Luca