[PATCH v3 0/6] ASoC: samsung: Sound support for Exynos5433 TM2(E) boards

[PATCH v3 0/6] ASoC: samsung: Sound support for Exynos5433 TM2(E) boards

[Sylwester Nawrocki]

This patch series adds sound support for the Exynos 5433 based TM2 and
TM2E board.  It includes minimal drivers for the Low Power Audio Subsystem
(LPASS) and the MAX98504 class D speaker amplifier as well as the actual
asoc machine driver.
The changes since v2 are listed in individual patches, I didn't add any
Acked-by tag to the max98504 DT binding patch as there was significant
change since v2.

Inha Song (1):
  ASoC: samsung: Add Samsung Low Power Audio Subsystem driver

Sylwester Nawrocki (5):
  ASoC: samsung: Add DT bindings documentation for LPASS
  ASoC: Add DT bindings documentation for max98504 amplifier
  ASoC: max98504: Add max98504 speaker amplifier driver
  ASoC: samsung: Add DT bindings documentation for TM2 sound subsystem
  ASoC: samsung: Add machine driver for Exynos5433 based TM2 board

 .../devicetree/bindings/sound/max98504.txt         |  44 ++
 .../bindings/sound/samsung,exynos5433-lpass.txt    |   8 +
 .../bindings/sound/samsung,tm2-audio.txt           |  36 ++
 sound/soc/codecs/Kconfig                           |   4 +
 sound/soc/codecs/Makefile                          |   2 +
 sound/soc/codecs/max98504.c                        | 383 ++++++++++++++
 sound/soc/codecs/max98504.h                        |  59 +++
 sound/soc/samsung/Kconfig                          |  13 +
 sound/soc/samsung/Makefile                         |   4 +
 sound/soc/samsung/lpass.c                          | 162 ++++++
 sound/soc/samsung/lpass.h                          |  47 ++
 sound/soc/samsung/tm2_wm5110.c                     | 579 +++++++++++++++++++++
 12 files changed, 1341 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/max98504.txt
 create mode 100644 Documentation/devicetree/bindings/sound/samsung,exynos5433-lpass.txt
 create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
 create mode 100644 sound/soc/codecs/max98504.c
 create mode 100644 sound/soc/codecs/max98504.h
 create mode 100644 sound/soc/samsung/lpass.c
 create mode 100644 sound/soc/samsung/lpass.h
 create mode 100644 sound/soc/samsung/tm2_wm5110.c

--
1.9.1

[PATCH v3 1/6] ASoC: samsung: Add DT bindings documentation for LPASS

[Sylwester Nawrocki]

This patch add documentation of the DT bindings for the Samsung
Exynos SoC Low Power Audio Subsystem.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
Changes since v2:
 - none.
---
 .../devicetree/bindings/sound/samsung,exynos5433-lpass.txt        | 8 ++++++++
 1 file changed, 8 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/samsung,exynos5433-lpass.txt

diff --git a/Documentation/devicetree/bindings/sound/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/sound/samsung,exynos5433-lpass.txt
new file mode 100644
index 0000000..4beef25
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,exynos5433-lpass.txt
@@ -0,0 +1,8 @@
+
+Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
+
+Required properties:
+
+ - compatible : "samsung,exynos5433-lpass"
+ - reg : should contain the LPASS SFR region location and size
+ - samsung,pmu-syscon : the phandle to the Power Management Unit node
-- 
1.9.1

[PATCH v3 2/6] ASoC: samsung: Add Samsung Low Power Audio Subsystem driver

[Sylwester Nawrocki]

From: Inha Song <ideal.song@samsung.com>

This patch adds LPASS driver. The LPASS (Low Power Audio Subsystem)
is a special subsystem that supports audio playback with low power
consumption. This is a minimal driver which prepares resources for
IP blocks like I2S, audio DMA and UART.
Also system power ops are added to ensure the Audio Subsystem is
operational after system suspend/resume cycle.

Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
Changes since v2:
 - move misplaced SND_SAMSUNG_AUDSS Kconfig symbol addition
   to this patch.
---
 sound/soc/samsung/Kconfig  |   3 +
 sound/soc/samsung/Makefile |   2 +
 sound/soc/samsung/lpass.c  | 162 +++++++++++++++++++++++++++++++++++++++++++++
 sound/soc/samsung/lpass.h  |  47 +++++++++++++
 4 files changed, 214 insertions(+)
 create mode 100644 sound/soc/samsung/lpass.c
 create mode 100644 sound/soc/samsung/lpass.h

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 7b722b0..f8f23f2 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -31,6 +31,9 @@ config SND_SAMSUNG_SPDIF
 config SND_SAMSUNG_I2S
 	tristate
 
+config SND_SAMSUNG_AUDSS
+	tristate
+
 config SND_SOC_SAMSUNG_NEO1973_WM8753
 	tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
 	depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 5d03f5c..2b919d5 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -8,6 +8,7 @@ snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
 snd-soc-samsung-spdif-objs := spdif.o
 snd-soc-pcm-objs := pcm.o
 snd-soc-i2s-objs := i2s.o
+snd-soc-lpass-objs := lpass.o
 
 obj-$(CONFIG_SND_SOC_SAMSUNG) += snd-soc-s3c-dma.o
 obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o
@@ -18,6 +19,7 @@ obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o
 obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o
 obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o
 obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-idma.o
+obj-$(CONFIG_SND_SAMSUNG_AUDSS) += snd-soc-lpass.o
 
 # S3C24XX Machine Support
 snd-soc-jive-wm8750-objs := jive_wm8750.o
diff --git a/sound/soc/samsung/lpass.c b/sound/soc/samsung/lpass.c
new file mode 100644
index 0000000..57198cf
--- /dev/null
+++ b/sound/soc/samsung/lpass.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2015 - 2016 Samsung Electronics Co., Ltd.
+ * 	Inha Song <ideal.song@samsung.com>
+ *
+ * Low Power Audio Subsystem driver for Samsung Exynos
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <sound/soc.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "lpass.h"
+
+#define EXYNOS5433_PAD_RETENTION_AUD_OPTION_OFFSET	0x3028
+#define EXYNOS5433_INITIATE_WAKEUP_FROM_LOWPWR_MASK	BIT(28)
+
+struct lpass_info {
+	struct platform_device	*pdev;
+	void __iomem		*reg_sfr;
+	struct regmap		*reg_pmu;
+};
+
+static void lpass_core_sw_reset(struct lpass_info *lpass, int bit)
+{
+	unsigned int val;
+
+	val = readl(lpass->reg_sfr + SFR_LPASS_CORE_SW_RESET);
+
+	val &= ~(1 << bit);
+	writel(val, lpass->reg_sfr + SFR_LPASS_CORE_SW_RESET);
+
+	udelay(100);
+
+	val |= 1 << bit;
+	writel(val, lpass->reg_sfr + SFR_LPASS_CORE_SW_RESET);
+}
+
+static void lpass_enable(struct lpass_info *lpass)
+{
+	if (!lpass->reg_pmu)
+		return;
+
+	/* Unmasks SFR, DMA, I2S Interrupt */
+	writel(LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S,
+	       lpass->reg_sfr + SFR_LPASS_INTR_CA5_MASK);
+
+	writel(LPASS_INTR_DMA | LPASS_INTR_I2S | LPASS_INTR_SFR
+			| LPASS_INTR_UART,
+	       lpass->reg_sfr + SFR_LPASS_INTR_CPU_MASK);
+
+	/* Activate related PADs from retention state */
+	regmap_write(lpass->reg_pmu,
+		     EXYNOS5433_PAD_RETENTION_AUD_OPTION_OFFSET,
+		     EXYNOS5433_INITIATE_WAKEUP_FROM_LOWPWR_MASK);
+
+	lpass_core_sw_reset(lpass, SW_RESET_I2S);
+	lpass_core_sw_reset(lpass, SW_RESET_DMA);
+	lpass_core_sw_reset(lpass, SW_RESET_MEM);
+}
+
+static void lpass_disable(struct lpass_info *lpass)
+{
+	if (!lpass->reg_pmu)
+		return;
+
+	/* Masks SFR, DMA, I2S Interrupt */
+	writel(0, lpass->reg_sfr + SFR_LPASS_INTR_CA5_MASK);
+
+	writel(0, lpass->reg_sfr + SFR_LPASS_INTR_CPU_MASK);
+
+	/* Deactivate related PADs from retention state */
+	regmap_write(lpass->reg_pmu,
+		     EXYNOS5433_PAD_RETENTION_AUD_OPTION_OFFSET, 0);
+}
+
+static int lpass_probe(struct platform_device *pdev)
+{
+	struct lpass_info *lpass;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+
+	if (!dev->of_node) {
+		dev_err(dev, "Failed to get DT node\n");
+		return -ENODEV;
+	}
+
+	lpass = devm_kzalloc(dev, sizeof(*lpass), GFP_KERNEL);
+	if (!lpass)
+		return -ENOMEM;
+
+	lpass->pdev = pdev;
+	platform_set_drvdata(pdev, lpass);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lpass->reg_sfr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(lpass->reg_sfr))
+		return PTR_ERR(lpass->reg_sfr);
+
+	lpass->reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
+						"samsung,pmu-syscon");
+	if (IS_ERR(lpass->reg_pmu)) {
+		dev_err(dev, "Failed to lookup PMU regmap\n");
+		return PTR_ERR(lpass->reg_pmu);
+	}
+
+	lpass_enable(lpass);
+
+	return 0;
+}
+
+static int lpass_suspend(struct device *dev)
+{
+	struct lpass_info *lpass = dev_get_drvdata(dev);
+
+	lpass_disable(lpass);
+
+	return 0;
+}
+
+static int lpass_resume(struct device *dev)
+{
+	struct lpass_info *lpass = dev_get_drvdata(dev);
+
+	lpass_enable(lpass);
+
+	return 0;
+}
+
+static const struct of_device_id lpass_of_match[] = {
+	{ .compatible	= "samsung,exynos5433-lpass", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpass_of_match);
+
+static const struct dev_pm_ops lpass_pm_ops = {
+	.suspend	= lpass_suspend,
+	.resume		= lpass_resume,
+};
+
+static struct platform_driver lpass_driver = {
+	.driver = {
+		.name		= "samsung-lpass",
+		.pm		= &lpass_pm_ops,
+		.of_match_table	= lpass_of_match,
+	},
+	.probe	= lpass_probe,
+};
+
+module_platform_driver(lpass_driver);
+
+MODULE_AUTHOR("Inha Song <ideal.song@samsung.com>");
+MODULE_DESCRIPTION("Samsung Low Power Audio Subsystem (LPASS) driver");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/samsung/lpass.h b/sound/soc/samsung/lpass.h
new file mode 100644
index 0000000..59179d6
--- /dev/null
+++ b/sound/soc/samsung/lpass.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2015 - 2016 Samsung Electronics Co., Ltd.
+ *	Inha Song <ideal.song@samsung.com>
+ *
+ * Low Power Audio Subsystem driver for Samsung Exynos
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef SND_SOC_SAMSUNG_LPASS_H_
+#define SND_SOC_SAMSUNG_LPASS_H_
+
+/* SFR */
+#define SFR_LPASS_CORE_SW_RESET	(0x08)
+#define SFR_LPASS_INTR_CA5_MASK	(0x48)
+#define SFR_LPASS_INTR_CPU_MASK	(0x58)
+
+/* SW_RESET */
+#define LPASS_SW_RESET_CA5	(1 << 0)
+#define LPASS_SW_RESET_SB	(1 << 11)
+
+/* Interrupt mask */
+#define LPASS_INTR_APM		(1 << 9)
+#define LPASS_INTR_MIF		(1 << 8)
+#define LPASS_INTR_TIMER	(1 << 7)
+#define LPASS_INTR_DMA		(1 << 6)
+#define LPASS_INTR_GPIO		(1 << 5)
+#define LPASS_INTR_I2S		(1 << 4)
+#define LPASS_INTR_PCM		(1 << 3)
+#define LPASS_INTR_SB		(1 << 2)
+#define LPASS_INTR_UART		(1 << 1)
+#define LPASS_INTR_SFR		(1 << 0)
+
+/* SW Reset bit */
+enum {
+	SW_RESET_DMA = 0,
+	SW_RESET_MEM,
+	SW_RESET_TIMER,
+	SW_RESET_I2S = 8,
+	SW_RESET_PCM,
+	SW_RESET_UART,
+	SW_RESET_SLIMBUS,
+};
+
+#endif /* SND_SOC_SAMSUNG_LPASS_H_ */
-- 
1.9.1

[PATCH v3 3/6] ASoC: Add DT bindings documentation for max98504 amplifier

[Sylwester Nawrocki]

This patch adds DT bindings documentation for Maxim MAX98504
speaker amplifier.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v2:
 - added properties for VBAT brownout.

Changes since v1:
 - added 'interrupts' property.
---
 .../devicetree/bindings/sound/max98504.txt         | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/max98504.txt

diff --git a/Documentation/devicetree/bindings/sound/max98504.txt b/Documentation/devicetree/bindings/sound/max98504.txt
new file mode 100644
index 0000000..583ed5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98504.txt
@@ -0,0 +1,44 @@
+Maxim MAX98504 class D mono speaker amplifier
+
+This device supports I2C control interface and an IRQ output signal. It features
+a PCM and PDM digital audio interface (DAI) and a differential analog input.
+
+Required properties:
+
+ - compatible : "maxim,max98504"
+ - reg : should contain the I2C slave device address
+ - DVDD-supply, DIOVDD-supply, PVDD-supply: power supplies for the device,
+   as covered in ../regulator/regulator.txt
+ - interrupts : should specify the interrupt line the device is connected to,
+   as described in ../interrupt-controller/interrupts.txt
+
+Optional properties:
+
+ - maxim,brownout-threshold - the PVDD brownout threshold, the value must be
+   from 0, 1...21 range, corresponding to 2.6V, 2.65V...3.65V voltage range
+ - maxim,brownout-attenuation - the brownout attenuation to the speaker gain
+   applied during the "attack hold" and "timed hold" phase, the value must be
+   from 0...6 (dB) range
+ - maxim,brownout-attack-hold-ms - the brownout attack hold phase time in ms,
+   0...255 (VBATBROWN_ATTK_HOLD, register 0x0018)
+ - maxim,brownout-timed-hold-ms - the brownout timed hold phase time in ms,
+   0...255 (VBATBROWN_TIME_HOLD, register 0x0019)
+ - maxim,brownout-release-rate-ms - the brownout release phase step time in ms,
+   0...255 (VBATBROWN_RELEASE, register 0x001A)
+
+The default value when the above properties are not specified is 0,
+the maxim,brownout-threshold property must be specified to actually enable
+the PVDD brownout protection.
+
+Example:
+
+ max98504@31 {
+	compatible = "maxim,max98504";
+	reg = <0x31>;
+	interrupt-parent = <&gpio_bank_0>;
+	interrupts = <2 0>;
+
+	DVDD-supply = <&regulator>;
+	DIOVDD-supply = <&regulator>;
+	PVDD-supply = <&regulator>;
+};
-- 
1.9.1

[PATCH v3 4/6] ASoC: max98504: Add max98504 speaker amplifier driver

[Sylwester Nawrocki]

This patch adds driver for the MAX98504 speaker amplifier.  The MAX98504
is a high efficiency mono class D amplifier that features an integrated
boost converter with voltage and current sensing ADCs for Dynamic Speaker
Management.
This driver does not include support for the I2S DAI, as we wouldn't be
able  to test such code in a hardware configuration where the amplifier
has only wired the analogue input.

Signed-off-by: Inha Song <ideal.song@samsung.com>
[k.kozlowski: rebased on 4.1]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[s.nawrocki: removed unused macro definitions, rewrote regulator supply
 related parts, rewrote regmap configuration code, added support for speaker
 enable and global chip enable through DAPM, rewritten as component driver,
 added PDM DAI definition and TDM callbacks for PDM channels configuration]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
--
Changes since v2:
 - added parsing of the VBAT brownout DT properties,
 - removed MAX98504_REG_SPEAKER_SOURCE_SELECT register initialization,
 - removed unused macro definitions.

Changes since v1:
 - none.

Changes since initial version:
 - added regulator supply handling,
 - added DAPM widges for speaker source selection,
 - added PDM DAI definition and TDM callbacks for setting up active
   PDM Tx channels and I/V sense ADC data mapping,
 - removed all optional DT properties, added regulator supply properties
   in the DT binding.
---
 sound/soc/codecs/Kconfig    |   4 +
 sound/soc/codecs/Makefile   |   2 +
 sound/soc/codecs/max98504.c | 383 ++++++++++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/max98504.h |  59 +++++++
 4 files changed, 448 insertions(+)
 create mode 100644 sound/soc/codecs/max98504.c
 create mode 100644 sound/soc/codecs/max98504.h

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 02d2084..f2f8603 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -557,6 +557,10 @@ config SND_SOC_MAX98357A
 config SND_SOC_MAX98371
        tristate
 
+config SND_SOC_MAX98504
+	tristate "Maxim MAX98504 speaker amplifier"
+	depends on I2C
+
 config SND_SOC_MAX9867
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index abf2126..58036af 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -214,6 +214,7 @@ snd-soc-wm-hubs-objs := wm_hubs.o
 
 # Amp
 snd-soc-max9877-objs := max9877.o
+snd-soc-max98504-objs := max98504.o
 snd-soc-tpa6130a2-objs := tpa6130a2.o
 snd-soc-tas2552-objs := tas2552.o
 
@@ -431,4 +432,5 @@ obj-$(CONFIG_SND_SOC_WM_HUBS)	+= snd-soc-wm-hubs.o
 
 # Amp
 obj-$(CONFIG_SND_SOC_MAX9877)	+= snd-soc-max9877.o
+obj-$(CONFIG_SND_SOC_MAX98504)	+= snd-soc-max98504.o
 obj-$(CONFIG_SND_SOC_TPA6130A2)	+= snd-soc-tpa6130a2.o
diff --git a/sound/soc/codecs/max98504.c b/sound/soc/codecs/max98504.c
new file mode 100644
index 0000000..a7320e7
--- /dev/null
+++ b/sound/soc/codecs/max98504.c
@@ -0,0 +1,383 @@
+/*
+ * MAX98504 ALSA SoC Audio driver
+ *
+ * Copyright 2013 - 2014 Maxim Integrated Products
+ * Copyright 2016 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <sound/soc.h>
+
+#include "max98504.h"
+
+static const char * const max98504_supply_names[] = {
+	"DVDD",
+	"DIOVDD",
+	"PVDD",
+};
+#define MAX98504_NUM_SUPPLIES ARRAY_SIZE(max98504_supply_names)
+
+struct max98504_priv {
+	struct regmap *regmap;
+	struct regulator_bulk_data supplies[MAX98504_NUM_SUPPLIES];
+	unsigned int pcm_rx_channels;
+	bool brownout_enable;
+	unsigned int brownout_threshold;
+	unsigned int brownout_attenuation;
+	unsigned int brownout_attack_hold;
+	unsigned int brownout_timed_hold;
+	unsigned int brownout_release_rate;
+};
+
+static struct reg_default max98504_reg_defaults[] = {
+	{ 0x01,	0},
+	{ 0x02,	0},
+	{ 0x03,	0},
+	{ 0x04,	0},
+	{ 0x10, 0},
+	{ 0x11, 0},
+	{ 0x12, 0},
+	{ 0x13, 0},
+	{ 0x14, 0},
+	{ 0x15, 0},
+	{ 0x16, 0},
+	{ 0x17, 0},
+	{ 0x18, 0},
+	{ 0x19, 0},
+	{ 0x1A, 0},
+	{ 0x20, 0},
+	{ 0x21, 0},
+	{ 0x22, 0},
+	{ 0x23, 0},
+	{ 0x24, 0},
+	{ 0x25, 0},
+	{ 0x26, 0},
+	{ 0x27, 0},
+	{ 0x28, 0},
+	{ 0x30, 0},
+	{ 0x31, 0},
+	{ 0x32, 0},
+	{ 0x33, 0},
+	{ 0x34, 0},
+	{ 0x35, 0},
+	{ 0x36, 0},
+	{ 0x37, 0},
+	{ 0x38, 0},
+	{ 0x39, 0},
+	{ 0x40, 0},
+	{ 0x41, 0},
+};
+
+static bool max98504_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX98504_INTERRUPT_STATUS:
+	case MAX98504_INTERRUPT_FLAGS:
+	case MAX98504_INTERRUPT_FLAG_CLEARS:
+	case MAX98504_WATCHDOG_CLEAR:
+	case MAX98504_GLOBAL_ENABLE:
+	case MAX98504_SOFTWARE_RESET:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool max98504_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX98504_SOFTWARE_RESET:
+	case MAX98504_WATCHDOG_CLEAR:
+	case MAX98504_INTERRUPT_FLAG_CLEARS:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static int max98504_pcm_rx_ev(struct snd_soc_dapm_widget *w,
+			      struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm);
+	struct max98504_priv *max98504 = snd_soc_component_get_drvdata(c);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		regmap_write(max98504->regmap, MAX98504_PCM_RX_ENABLE,
+			     max98504->pcm_rx_channels);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		regmap_write(max98504->regmap, MAX98504_PCM_RX_ENABLE, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static int max98504_component_probe(struct snd_soc_component *c)
+{
+	struct max98504_priv *max98504 = snd_soc_component_get_drvdata(c);
+	struct regmap *map = max98504->regmap;
+	int ret;
+
+	ret = regulator_bulk_enable(MAX98504_NUM_SUPPLIES, max98504->supplies);
+	if (ret < 0)
+		return ret;
+
+	regmap_write(map, MAX98504_SOFTWARE_RESET, 0x1);
+	msleep(20);
+
+	if (!max98504->brownout_enable)
+		return 0;
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_ENABLE, 0x1);
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_CONFIG_1,
+		     (max98504->brownout_threshold & 0x1f) << 3 |
+		     (max98504->brownout_attenuation & 0x3));
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_CONFIG_2,
+		     max98504->brownout_attack_hold & 0xff);
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_CONFIG_3,
+		     max98504->brownout_timed_hold & 0xff);
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_CONFIG_4,
+		     max98504->brownout_release_rate & 0xff);
+
+	return 0;
+}
+
+static void max98504_component_remove(struct snd_soc_component *c)
+{
+	struct max98504_priv *max98504 = snd_soc_component_get_drvdata(c);
+
+	regulator_bulk_disable(MAX98504_NUM_SUPPLIES, max98504->supplies);
+}
+
+static const char *spk_source_mux_text[] = {
+	"PCM Monomix", "Analog In", "PDM Left", "PDM Right"
+};
+
+static const struct soc_enum spk_source_mux_enum =
+	SOC_ENUM_SINGLE(MAX98504_SPEAKER_SOURCE_SELECT,
+			0, ARRAY_SIZE(spk_source_mux_text),
+			spk_source_mux_text);
+
+static const struct snd_kcontrol_new spk_source_mux =
+	SOC_DAPM_ENUM("SPK Source", spk_source_mux_enum);
+
+static const struct snd_soc_dapm_route max98504_dapm_routes[] = {
+	{ "SPKOUT", NULL, "Global Enable" },
+	{ "SPK Source", "PCM Monomix", "DAC PCM" },
+	{ "SPK Source", "Analog In", "AIN" },
+	{ "SPK Source", "PDM Left", "DAC PDM" },
+	{ "SPK Source", "PDM Right", "DAC PDM" },
+};
+
+static const struct snd_soc_dapm_widget max98504_dapm_widgets[] = {
+	SND_SOC_DAPM_SUPPLY("Global Enable", MAX98504_GLOBAL_ENABLE,
+		0, 0, NULL, 0),
+	SND_SOC_DAPM_INPUT("AIN"),
+	SND_SOC_DAPM_AIF_OUT("AIF2OUTL", "AIF2 Capture", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("AIF2OUTR", "AIF2 Capture", 1, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_DAC_E("DAC PCM", NULL, SND_SOC_NOPM, 0, 0,
+		max98504_pcm_rx_ev,
+		SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_DAC("DAC PDM", NULL, MAX98504_PDM_RX_ENABLE, 0, 0),
+	SND_SOC_DAPM_MUX("SPK Source", SND_SOC_NOPM, 0, 0, &spk_source_mux),
+	SND_SOC_DAPM_REG(snd_soc_dapm_spk, "SPKOUT",
+		MAX98504_SPEAKER_ENABLE, 0, 1, 1, 0),
+};
+
+static int max98504_set_tdm_slot(struct snd_soc_dai *dai,
+		unsigned int tx_mask, unsigned int rx_mask,
+		int slots, int slot_width)
+{
+	struct max98504_priv *max98504 = snd_soc_dai_get_drvdata(dai);
+	struct regmap *map = max98504->regmap;
+
+
+	switch (dai->id) {
+	case MAX98504_DAI_ID_PCM:
+		regmap_write(map, MAX98504_PCM_TX_ENABLE, tx_mask);
+		max98504->pcm_rx_channels = rx_mask;
+		break;
+
+	case MAX98504_DAI_ID_PDM:
+		regmap_write(map, MAX98504_PDM_TX_ENABLE, tx_mask);
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+static int max98504_set_channel_map(struct snd_soc_dai *dai,
+		unsigned int tx_num, unsigned int *tx_slot,
+		unsigned int rx_num, unsigned int *rx_slot)
+{
+	struct max98504_priv *max98504 = snd_soc_dai_get_drvdata(dai);
+	struct regmap *map = max98504->regmap;
+	unsigned int i, sources = 0;
+
+	for (i = 0; i < tx_num; i++)
+		if (tx_slot[i])
+			sources |= (1 << i);
+
+	switch (dai->id) {
+	case MAX98504_DAI_ID_PCM:
+		regmap_write(map, MAX98504_PCM_TX_CHANNEL_SOURCES,
+			     sources);
+		break;
+
+	case MAX98504_DAI_ID_PDM:
+		regmap_write(map, MAX98504_PDM_TX_CONTROL, sources);
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	regmap_write(map, MAX98504_MEASUREMENT_ENABLE, sources ? 0x3 : 0x01);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops max98504_dai_ops = {
+	.set_tdm_slot		= max98504_set_tdm_slot,
+	.set_channel_map	= max98504_set_channel_map,
+};
+
+#define MAX98504_FORMATS	(SNDRV_PCM_FMTBIT_S8|SNDRV_PCM_FMTBIT_S16_LE|\
+				SNDRV_PCM_FMTBIT_S24_LE|SNDRV_PCM_FMTBIT_S32_LE)
+#define MAX98504_PDM_RATES	(SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_16000|\
+				SNDRV_PCM_RATE_32000|SNDRV_PCM_RATE_44100|\
+				SNDRV_PCM_RATE_48000|SNDRV_PCM_RATE_88200|\
+				SNDRV_PCM_RATE_96000)
+
+static struct snd_soc_dai_driver max98504_dai[] = {
+	/* TODO: Add the PCM interface definitions */
+	{
+		.name = "max98504-aif2",
+		.id = MAX98504_DAI_ID_PDM,
+		.playback = {
+			.stream_name	= "AIF2 Playback",
+			.channels_min	= 1,
+			.channels_max	= 2,
+			.rates		= MAX98504_PDM_RATES,
+			.formats	= MAX98504_FORMATS,
+		},
+		.capture = {
+			.stream_name	= "AIF2 Capture",
+			.channels_min	= 1,
+			.channels_max	= 2,
+			.rates		= MAX98504_PDM_RATES,
+			.formats	= MAX98504_FORMATS,
+		},
+		.ops = &max98504_dai_ops,
+	},
+};
+
+static const struct snd_soc_component_driver max98504_component_driver = {
+	.probe			= max98504_component_probe,
+	.remove			= max98504_component_remove,
+	.dapm_widgets		= max98504_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(max98504_dapm_widgets),
+	.dapm_routes		= max98504_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(max98504_dapm_routes),
+};
+
+static const struct regmap_config max98504_regmap = {
+	.reg_bits		= 16,
+	.val_bits		= 8,
+	.max_register		= MAX98504_MAX_REGISTER,
+	.reg_defaults		= max98504_reg_defaults,
+	.num_reg_defaults	= ARRAY_SIZE(max98504_reg_defaults),
+	.volatile_reg		= max98504_volatile_register,
+	.readable_reg		= max98504_readable_register,
+	.cache_type		= REGCACHE_RBTREE,
+};
+
+static int max98504_i2c_probe(struct i2c_client *client,
+			      const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *node = dev->of_node;
+	struct max98504_priv *max98504;
+	int i, ret;
+
+	max98504 = devm_kzalloc(dev, sizeof(*max98504), GFP_KERNEL);
+	if (!max98504)
+		return -ENOMEM;
+
+	if (node) {
+		if (!of_property_read_u32(node, "maxim,brownout-threshold",
+					&max98504->brownout_threshold))
+			max98504->brownout_enable = true;
+
+		of_property_read_u32(node, "maxim,brownout-attenuation",
+					&max98504->brownout_attenuation);
+		of_property_read_u32(node, "maxim,brownout-attack-hold-ms",
+					&max98504->brownout_attack_hold);
+		of_property_read_u32(node, "maxim,brownout-timed-hold-ms",
+					&max98504->brownout_timed_hold);
+		of_property_read_u32(node, "maxim,brownout-release-rate-ms",
+					&max98504->brownout_release_rate);
+	}
+
+	max98504->regmap = devm_regmap_init_i2c(client, &max98504_regmap);
+	if (IS_ERR(max98504->regmap)) {
+		ret = PTR_ERR(max98504->regmap);
+		dev_err(&client->dev, "regmap initialization failed: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < MAX98504_NUM_SUPPLIES; i++)
+		max98504->supplies[i].supply = max98504_supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, MAX98504_NUM_SUPPLIES,
+				      max98504->supplies);
+	if (ret < 0)
+		return ret;
+
+	i2c_set_clientdata(client, max98504);
+
+	return devm_snd_soc_register_component(dev, &max98504_component_driver,
+				max98504_dai, ARRAY_SIZE(max98504_dai));
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id max98504_of_match[] = {
+	{ .compatible = "maxim,max98504" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, max98504_of_match);
+#endif
+
+static const struct i2c_device_id max98504_i2c_id[] = {
+	{ "max98504" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max98504_i2c_id);
+
+static struct i2c_driver max98504_i2c_driver = {
+	.driver = {
+		.name = "max98504",
+		.of_match_table = of_match_ptr(max98504_of_match),
+	},
+	.probe = max98504_i2c_probe,
+	.id_table = max98504_i2c_id,
+};
+module_i2c_driver(max98504_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC MAX98504 driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/max98504.h b/sound/soc/codecs/max98504.h
new file mode 100644
index 0000000..afbefad
--- /dev/null
+++ b/sound/soc/codecs/max98504.h
@@ -0,0 +1,59 @@
+/*
+ * MAX98504 ALSA SoC Audio driver
+ *
+ * Copyright 2011 - 2012 Maxim Integrated Products
+ * Copyright 2016 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef MAX98504_H_
+#define MAX98504_H_
+
+/*
+ * MAX98504 Register Definitions
+ */
+#define MAX98504_INTERRUPT_STATUS		0x01
+#define MAX98504_INTERRUPT_FLAGS		0x02
+#define MAX98504_INTERRUPT_ENABLE		0x03
+#define MAX98504_INTERRUPT_FLAG_CLEARS		0x04
+#define MAX98504_GPIO_ENABLE			0x10
+#define MAX98504_GPIO_CONFIG			0x11
+#define MAX98504_WATCHDOG_ENABLE		0x12
+#define MAX98504_WATCHDOG_CONFIG		0x13
+#define MAX98504_WATCHDOG_CLEAR			0x14
+#define MAX98504_CLOCK_MONITOR_ENABLE		0x15
+#define MAX98504_PVDD_BROWNOUT_ENABLE		0x16
+#define MAX98504_PVDD_BROWNOUT_CONFIG_1		0x17
+#define MAX98504_PVDD_BROWNOUT_CONFIG_2		0x18
+#define MAX98504_PVDD_BROWNOUT_CONFIG_3		0x19
+#define MAX98504_PVDD_BROWNOUT_CONFIG_4		0x1a
+#define MAX98504_PCM_RX_ENABLE			0x20
+#define MAX98504_PCM_TX_ENABLE			0x21
+#define MAX98504_PCM_TX_HIZ_CONTROL		0x22
+#define MAX98504_PCM_TX_CHANNEL_SOURCES		0x23
+#define MAX98504_PCM_MODE_CONFIG		0x24
+#define MAX98504_PCM_DSP_CONFIG			0x25
+#define MAX98504_PCM_CLOCK_SETUP		0x26
+#define MAX98504_PCM_SAMPLE_RATE_SETUP		0x27
+#define MAX98504_PCM_TO_SPEAKER_MONOMIX		0x28
+#define MAX98504_PDM_TX_ENABLE			0x30
+#define MAX98504_PDM_TX_HIZ_CONTROL		0x31
+#define MAX98504_PDM_TX_CONTROL			0x32
+#define MAX98504_PDM_RX_ENABLE			0x33
+#define MAX98504_SPEAKER_ENABLE			0x34
+#define MAX98504_SPEAKER_SOURCE_SELECT		0x35
+#define MAX98504_MEASUREMENT_ENABLE		0x36
+#define MAX98504_ANALOGUE_INPUT_GAIN		0x37
+#define MAX98504_TEMPERATURE_LIMIT_CONFIG	0x38
+#define MAX98504_GLOBAL_ENABLE			0x40
+#define MAX98504_SOFTWARE_RESET			0x41
+#define MAX98504_REV_ID				0x7fff
+
+#define MAX98504_MAX_REGISTER			0x7fff
+
+#define MAX98504_DAI_ID_PCM			1
+#define MAX98504_DAI_ID_PDM			2
+
+#endif /* MAX98504_H_ */
-- 
1.9.1

[PATCH v3 5/6] ASoC: samsung: Add DT bindings documentation for TM2 sound subsystem

[Sylwester Nawrocki]

This patch adds DT binding documentation for Exnos5433 based TM2
and TM2E boards sound subsystem.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes since v2:
 - none.
Changes since initial version:
 - dropped clocks, clock-names properties, instead properties from
   the CODEC node will be used,
 - property renames: 'samsung,model' -> 'model', 'samsung,i2s-controller'
   -> 'i2s-controller', 'samsung,speaker-amplifier' -> 'audio-amplifier',
 - added 'audio-codec' property.
---
 .../bindings/sound/samsung,tm2-audio.txt           | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt

diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
new file mode 100644
index 0000000..3ae56f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
@@ -0,0 +1,36 @@
+Samsung Exynos5433 TM2(E) audio complex with WM5110 codec
+
+Required properties:
+
+ - compatible : "samsung,tm2-audio"
+ - model : the user-visible name of this sound complex
+ - audio-codec: the phandle of the wm5110 audio codec node,
+   as described in Documentation/devicetree/bindings/mfd/arizona.txt
+ - i2s-controller : the phandle of the I2S controller
+ - audio-amplifier : the phandle of the MAX98504 amplifier
+ - samsung,audio-routing : a list of the connections between audio
+   components;  each entry is a pair of strings, the first being the
+   connection's sink, the second being the connection's source;
+   valid names for sources and sinks are the WM5110's and MAX98504's
+   pins and the jacks on the board:
+   HP, SPK, Main Mic, Sub Mic, Third Mic, Headset Mic.
+ - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator
+
+Example:
+
+sound {
+	compatible = "samsung,tm2-audio";
+	audio-codec = <&wm5110>;
+	i2s-controller = <&i2s0>;
+	audio-amplifier = <&max98504>;
+	mic-bias-gpios = <&gpr3 2 0>;
+	model = "wm5110";
+	samsung,audio-routing =
+		"HP", "HPOUT1L",
+		"HP", "HPOUT1R",
+		"SPK", "SPKOUT",
+		"SPKOUT", "HPOUT2L",
+		"SPKOUT", "HPOUT2R",
+		"Main Mic", "MICBIAS2",
+		"IN1R", "Main Mic";
+};
-- 
1.9.1

[PATCH v3 6/6] ASoC: samsung: Add machine driver for Exynos5433 based TM2 board

[Sylwester Nawrocki]

This patch adds the sound machine driver for TM2 and TM2E board.
Speaker and headphone playback, Main Mic capture, Bluetooth,
Voice call and external accessory are supported.

Signed-off-by: Inha Song <ideal.song@samsung.com>
[k.kozlowski: rebased on 4.1]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[s.nawrocki: rebased to 4.7, adjustment to the ASoC core changes,
 removed unused ops and direct calls to the max98504 function,
 added parsing of "audio-amplifier" and "audio-codec"
 properties, added TDM API calls, switched to gpiod API]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v2:
 - added missing Kconfig dependencies.

Changes since initial version:
 - added PDM Tx channels setup through TDM API
 - adaptation to renamed 'samsung,model', 'samsung,i2s-controller',
   'samsung,speaker-amplifier' properties,
 - removed some dev_dbg() calls,
 - cleaned up mic-bias GPIO handling and switched to gpiod API,
 - added parsing of 'audio-codec' property,
 - initialized codec_of_node of dai_link instead of codec_name,
 - switched to using clock, clock-names properties from the wm5110
   codec node,
 - fixed error paths in probe() (of_node reference counting).
---
 sound/soc/samsung/Kconfig      |  10 +
 sound/soc/samsung/Makefile     |   2 +
 sound/soc/samsung/tm2_wm5110.c | 579 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 591 insertions(+)
 create mode 100644 sound/soc/samsung/tm2_wm5110.c

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index f8f23f2..e8e0944 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -232,3 +232,13 @@ config SND_SOC_ARNDALE_RT5631_ALC5631
         depends on SND_SOC_SAMSUNG && I2C
         select SND_SAMSUNG_I2S
         select SND_SOC_RT5631
+
+config SND_SOC_SAMSUNG_TM2_WM5110
+	tristate "SoC I2S Audio support for WM5110 on TM2 board"
+	depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
+	select SND_SOC_MAX98504
+	select SND_SOC_WM5110
+	select SND_SAMSUNG_I2S
+	select SND_SAMSUNG_AUDSS
+	help
+	  Say Y if you want to add support for SoC audio on the TM2 board.
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 2b919d5..9332991 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -46,6 +46,7 @@ snd-soc-lowland-objs := lowland.o
 snd-soc-littlemill-objs := littlemill.o
 snd-soc-bells-objs := bells.o
 snd-soc-arndale-rt5631-objs := arndale_rt5631.o
+snd-soc-tm2-wm5110-objs := tm2_wm5110.o
 
 obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -71,3 +72,4 @@ obj-$(CONFIG_SND_SOC_LOWLAND) += snd-soc-lowland.o
 obj-$(CONFIG_SND_SOC_LITTLEMILL) += snd-soc-littlemill.o
 obj-$(CONFIG_SND_SOC_BELLS) += snd-soc-bells.o
 obj-$(CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631) += snd-soc-arndale-rt5631.o
+obj-$(CONFIG_SND_SOC_SAMSUNG_TM2_WM5110) += snd-soc-tm2-wm5110.o
diff --git a/sound/soc/samsung/tm2_wm5110.c b/sound/soc/samsung/tm2_wm5110.c
new file mode 100644
index 0000000..9728b3c
--- /dev/null
+++ b/sound/soc/samsung/tm2_wm5110.c
@@ -0,0 +1,579 @@
+/*
+ * Copyright (C) 2015 - 2016 Samsung Electronics Co., Ltd.
+ *
+ * Authors: Inha Song <ideal.song@samsung.com>
+ *          Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "i2s.h"
+#include "../codecs/wm5110.h"
+
+struct tm2_machine_priv {
+	struct snd_soc_codec *codec;
+	struct clk *codec_mclk1;
+	struct clk *codec_mclk2;
+
+	unsigned int sysclk_rate;
+
+	struct gpio_desc *gpio_mic_bias;
+};
+
+static int tm2_start_sysclk(struct snd_soc_card *card)
+{
+	struct tm2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+	struct snd_soc_codec *codec = priv->codec;
+	unsigned long mclk_rate = clk_get_rate(priv->codec_mclk1);
+	int ret;
+
+	ret = clk_prepare_enable(priv->codec_mclk1);
+	if (ret < 0) {
+		dev_err(card->dev, "Failed to enable mclk: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_codec_set_pll(codec, WM5110_FLL1,
+				    ARIZONA_FLL_SRC_MCLK1,
+				    mclk_rate,
+				    priv->sysclk_rate);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to start FLL: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_codec_set_pll(codec, WM5110_FLL1_REFCLK,
+				    ARIZONA_FLL_SRC_MCLK1,
+				    mclk_rate,
+				    priv->sysclk_rate);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set FLL1 Source: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_codec_set_sysclk(codec, ARIZONA_CLK_SYSCLK,
+				       ARIZONA_CLK_SRC_FLL1,
+				       priv->sysclk_rate,
+				       SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set SYSCLK Source: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tm2_stop_sysclk(struct snd_soc_card *card)
+{
+	struct tm2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+	struct snd_soc_codec *codec = priv->codec;
+	int ret;
+
+	ret = snd_soc_codec_set_pll(codec, WM5110_FLL1, 0, 0, 0);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to stop FLL: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_codec_set_sysclk(codec, ARIZONA_CLK_SYSCLK,
+				       ARIZONA_CLK_SRC_FLL1, 0, 0);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to stop SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	clk_disable_unprepare(priv->codec_mclk1);
+
+	return 0;
+}
+
+static int tm2_aif1_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_codec *codec = rtd->codec;
+	struct tm2_machine_priv *priv = snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	switch (params_rate(params)) {
+	case 4000:
+	case 8000:
+	case 12000:
+	case 16000:
+	case 24000:
+	case 32000:
+	case 48000:
+	case 96000:
+	case 192000:
+		/* Highest possible SYSCLK frequency: 147.456MHz */
+		priv->sysclk_rate = 147456000U;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+	case 88200:
+	case 176400:
+		/* Highest possible SYSCLK frequency: 135.4752 MHz */
+		priv->sysclk_rate = 135475200U;
+		break;
+	default:
+		dev_err(codec->dev, "Not supported sample rate: %d\n",
+			params_rate(params));
+		return -EINVAL;
+	}
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, ARIZONA_CLK_SYSCLK, 0, 0);
+	if (ret < 0) {
+		dev_err(codec_dai->dev, "Failed to set SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	return tm2_start_sysclk(rtd->card);
+}
+
+static struct snd_soc_ops tm2_aif1_ops = {
+	.hw_params = tm2_aif1_hw_params,
+};
+
+static int tm2_aif2_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_codec *codec = rtd->codec;
+	struct tm2_machine_priv *priv =	snd_soc_card_get_drvdata(rtd->card);
+	unsigned long mclk_rate = clk_get_rate(priv->codec_mclk1);
+	unsigned int asyncclk_rate;
+	int ret;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 12000:
+	case 16000:
+		/* Highest possible ASYNCCLK frequency: 49.152MHz */
+		asyncclk_rate = 49152000U;
+		break;
+	case 11025:
+		/* Highest possible ASYNCCLK frequency: 45.1584 MHz */
+		asyncclk_rate = 45158400U;
+		break;
+	default:
+		dev_err(codec->dev, "Not supported sample rate: %d\n",
+			params_rate(params));
+		return -EINVAL;
+	}
+
+	ret = snd_soc_codec_set_pll(codec, WM5110_FLL2,
+				    ARIZONA_FLL_SRC_MCLK1,
+				    mclk_rate,
+				    asyncclk_rate);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to start FLL: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_codec_set_pll(codec, WM5110_FLL2_REFCLK,
+				    ARIZONA_FLL_SRC_MCLK1,
+				    mclk_rate,
+				    asyncclk_rate);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set FLL1 Source: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, ARIZONA_CLK_ASYNCCLK, 0, 0);
+
+	if (ret < 0) {
+		dev_err(codec_dai->dev, "Failed to set ASYNCCLK: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_codec_set_sysclk(codec, ARIZONA_CLK_ASYNCCLK,
+				       ARIZONA_CLK_SRC_FLL2,
+				       asyncclk_rate,
+				       SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set ASYNCCLK Source: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops tm2_aif2_ops = {
+	.hw_params = tm2_aif2_hw_params,
+};
+
+static int tm2_mic_bias(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_card *card = w->dapm->card;
+	struct tm2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		gpiod_set_value_cansleep(priv->gpio_mic_bias,  1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		gpiod_set_value_cansleep(priv->gpio_mic_bias,  0);
+		break;
+	}
+
+	return 0;
+}
+
+static int tm2_set_bias_level(struct snd_soc_card *card,
+				struct snd_soc_dapm_context *dapm,
+				enum snd_soc_bias_level level)
+{
+	struct snd_soc_pcm_runtime *rtd;
+
+	rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name);
+
+	if (dapm->dev != rtd->codec_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_STANDBY:
+		if (card->dapm.bias_level == SND_SOC_BIAS_OFF)
+			tm2_start_sysclk(card);
+		break;
+	case SND_SOC_BIAS_OFF:
+		tm2_stop_sysclk(card);
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		break;
+	default:
+		break;
+	}
+
+	card->dapm.bias_level = level;
+
+	return 0;
+}
+
+static struct snd_soc_aux_dev tm2_speaker_amp_dev;
+
+static int tm2_late_probe(struct snd_soc_card *card)
+{
+	struct tm2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai_link_component dlc = { 0 };
+	struct snd_soc_dai *amp_pdm_dai;
+	struct snd_soc_pcm_runtime *rtd;
+	unsigned int ch_map[] = { 0, 1 };
+	int ret;
+
+	rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name);
+	priv->codec = rtd->codec;
+
+	/* 32 kHz must be enabled for jack detection */
+	if (!IS_ERR(priv->codec_mclk2))
+		clk_prepare_enable(priv->codec_mclk2);
+
+	dlc.of_node = tm2_speaker_amp_dev.codec_of_node;
+	amp_pdm_dai = snd_soc_find_dai(&dlc);
+	if (!amp_pdm_dai)
+		return -ENODEV;
+
+	/* Set the MAX98504 V/I sense PDM Tx DAI channel mapping */
+	ret = snd_soc_dai_set_channel_map(amp_pdm_dai, ARRAY_SIZE(ch_map),
+					  ch_map, 0, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_tdm_slot(amp_pdm_dai, 0x3, 0x0, 2, 16);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int tm2_suspend_post(struct snd_soc_card *card)
+{
+	return tm2_stop_sysclk(card);
+}
+
+static int tm2_resume_pre(struct snd_soc_card *card)
+{
+	return tm2_start_sysclk(card);
+}
+
+static const struct snd_kcontrol_new tm2_controls[] = {
+	SOC_DAPM_PIN_SWITCH("HP"),
+	SOC_DAPM_PIN_SWITCH("SPK"),
+	SOC_DAPM_PIN_SWITCH("RCV"),
+	SOC_DAPM_PIN_SWITCH("VPS"),
+	SOC_DAPM_PIN_SWITCH("HDMI"),
+
+	SOC_DAPM_PIN_SWITCH("Main Mic"),
+	SOC_DAPM_PIN_SWITCH("Sub Mic"),
+	SOC_DAPM_PIN_SWITCH("Third Mic"),
+
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+};
+
+const struct snd_soc_dapm_widget tm2_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("HP", NULL),
+	SND_SOC_DAPM_SPK("SPK", NULL),
+	SND_SOC_DAPM_SPK("RCV", NULL),
+	SND_SOC_DAPM_LINE("VPS", NULL),
+	SND_SOC_DAPM_LINE("HDMI", NULL),
+
+	SND_SOC_DAPM_MIC("Main Mic", tm2_mic_bias),
+	SND_SOC_DAPM_MIC("Sub Mic", NULL),
+	SND_SOC_DAPM_MIC("Third Mic", NULL),
+
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
+static const struct snd_soc_component_driver tm2_component = {
+	.name	= "tm2-audio",
+};
+
+static struct snd_soc_dai_driver tm2_ext_dai[] = {
+	{
+		.name = "Voice call",
+		.playback = {
+			.channels_min = 1,
+			.channels_max = 4,
+			.rate_min = 8000,
+			.rate_max = 48000,
+			.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
+					SNDRV_PCM_RATE_48000),
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		},
+		.capture = {
+			.channels_min = 1,
+			.channels_max = 4,
+			.rate_min = 8000,
+			.rate_max = 48000,
+			.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
+					SNDRV_PCM_RATE_48000),
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		},
+	},
+	{
+		.name = "Bluetooth",
+		.playback = {
+			.channels_min = 1,
+			.channels_max = 4,
+			.rate_min = 8000,
+			.rate_max = 16000,
+			.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		},
+		.capture = {
+			.channels_min = 1,
+			.channels_max = 2,
+			.rate_min = 8000,
+			.rate_max = 16000,
+			.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		},
+	},
+};
+
+static struct snd_soc_dai_link tm2_dai_links[] = {
+	{
+		.name		= "WM5110 AIF1",
+		.stream_name	= "HiFi Primary",
+		.codec_dai_name = "wm5110-aif1",
+		.ops		= &tm2_aif1_ops,
+		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM,
+	}, {
+		.name		= "WM5110 Voice",
+		.stream_name	= "Voice call",
+		.codec_dai_name = "wm5110-aif2",
+		.ops		= &tm2_aif2_ops,
+		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM,
+		.ignore_suspend = 1,
+	}, {
+		.name		= "WM5110 BT",
+		.stream_name	= "Bluetooth",
+		.codec_dai_name = "wm5110-aif3",
+		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM,
+		.ignore_suspend = 1,
+	}
+};
+
+static struct snd_soc_card tm2_card = {
+	.owner			= THIS_MODULE,
+
+	.dai_link		= tm2_dai_links,
+	.num_links		= ARRAY_SIZE(tm2_dai_links),
+	.controls		= tm2_controls,
+	.num_controls		= ARRAY_SIZE(tm2_controls),
+	.dapm_widgets		= tm2_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(tm2_dapm_widgets),
+
+	.aux_dev		= &tm2_speaker_amp_dev,
+	.num_aux_devs		= 1,
+
+	.late_probe		= tm2_late_probe,
+
+	.set_bias_level		= tm2_set_bias_level,
+
+	.suspend_post		= tm2_suspend_post,
+	.resume_pre		= tm2_resume_pre,
+};
+
+static int tm2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct snd_soc_card *card = &tm2_card;
+	struct tm2_machine_priv *priv;
+	struct device_node *cpu_dai_node, *codec_dai_node;
+	int ret, i;
+
+	if (!dev->of_node) {
+		dev_err(dev, "DT node is missing\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	snd_soc_card_set_drvdata(card, priv);
+	card->dev = dev;
+
+	priv->gpio_mic_bias = devm_gpiod_get(dev, "mic-bias",
+						GPIOF_OUT_INIT_LOW);
+	if (IS_ERR(priv->gpio_mic_bias)) {
+		dev_err(dev, "Failed to get mic bias gpio\n");
+		return PTR_ERR(priv->gpio_mic_bias);
+	}
+
+	ret = snd_soc_of_parse_card_name(card, "model");
+	if (ret < 0) {
+		dev_err(dev, "Card name is not specified\n");
+		return ret;
+	}
+
+	ret = snd_soc_of_parse_audio_routing(card, "samsung,audio-routing");
+	if (ret < 0) {
+		dev_err(dev, "Audio routing is not specified or invalid\n");
+		return ret;
+	}
+
+	card->aux_dev[0].codec_of_node = of_parse_phandle(dev->of_node,
+							"audio-amplifier", 0);
+	if (!card->aux_dev[0].codec_of_node) {
+		dev_err(dev, "audio-amplifier property invalid or missing\n");
+		return -EINVAL;
+	}
+
+	cpu_dai_node = of_parse_phandle(dev->of_node, "i2s-controller", 0);
+	if (!cpu_dai_node) {
+		dev_err(dev, "i2s-controllers property invalid or missing\n");
+		ret = -EINVAL;
+		goto err_put_amp;
+	}
+
+	codec_dai_node = of_parse_phandle(dev->of_node, "audio-codec", 0);
+	if (!codec_dai_node) {
+		dev_err(dev, "audio-codec property invalid or missing\n");
+		ret = -EINVAL;
+		goto err_put_cpu_dai;
+	}
+
+	for (i = 0; i < card->num_links; i++) {
+		card->dai_link[i].cpu_dai_name = NULL;
+		card->dai_link[i].cpu_name = NULL;
+		card->dai_link[i].platform_name = NULL;
+		card->dai_link[i].codec_of_node = codec_dai_node;
+		card->dai_link[i].cpu_of_node = cpu_dai_node;
+		card->dai_link[i].platform_of_node = cpu_dai_node;
+	}
+
+	priv->codec_mclk1 = of_clk_get_by_name(codec_dai_node, "mclk1");
+	if (IS_ERR(priv->codec_mclk1)) {
+		dev_err(dev, "Failed to get mclk1 clock\n");
+		ret = PTR_ERR(priv->codec_mclk1);
+		goto err_put_codec_dai;
+	}
+
+	/* mclk2 is optional */
+	priv->codec_mclk2 = of_clk_get_by_name(codec_dai_node, "mclk2");
+	if (IS_ERR(priv->codec_mclk2))
+		dev_info(dev, "Not using mclk2 clock\n");
+
+	ret = devm_snd_soc_register_component(dev, &tm2_component,
+				tm2_ext_dai, ARRAY_SIZE(tm2_ext_dai));
+	if (ret < 0) {
+		dev_err(dev, "Failed to register component: %d\n", ret);
+		goto err_put_mclk;
+	}
+
+	ret = devm_snd_soc_register_card(dev, card);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register card: %d\n", ret);
+		goto err_put_mclk;
+	}
+
+	return 0;
+
+err_put_mclk:
+	clk_put(priv->codec_mclk1);
+	if (!IS_ERR(priv->codec_mclk2))
+		clk_put(priv->codec_mclk2);
+err_put_codec_dai:
+	of_node_put(codec_dai_node);
+err_put_cpu_dai:
+	of_node_put(cpu_dai_node);
+err_put_amp:
+	of_node_put(card->aux_dev[0].codec_of_node);
+	return ret;
+}
+
+static int tm2_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &tm2_card;
+	struct tm2_machine_priv *priv = snd_soc_card_get_drvdata(card);
+
+	clk_put(priv->codec_mclk1);
+	if (!IS_ERR(priv->codec_mclk2))
+		clk_put(priv->codec_mclk2);
+
+	of_node_put(card->dai_link[0].codec_of_node);
+	of_node_put(card->dai_link[0].cpu_of_node);
+	of_node_put(card->aux_dev[0].codec_of_node);
+
+	return 0;
+}
+
+static const struct of_device_id tm2_of_match[] = {
+	{ .compatible = "samsung,tm2-audio" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tm2_of_match);
+
+static struct platform_driver tm2_driver = {
+	.driver = {
+		.name		= "tm2-audio",
+		.pm		= &snd_soc_pm_ops,
+		.of_match_table	= tm2_of_match,
+	},
+	.probe	= tm2_probe,
+	.remove	= tm2_remove,
+};
+
+module_platform_driver(tm2_driver);
+
+MODULE_AUTHOR("Inha Song <ideal.song@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC Exynos TM2 Audio Support");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

Applied "ASoC: Add DT bindings documentation for max98504 amplifier" to the asoc tree

[Mark Brown]

The patch

   ASoC: Add DT bindings documentation for max98504 amplifier

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 51ded0fbc18c5c05782c1c7eba30264b524added Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Wed, 29 Jun 2016 13:26:36 +0200
Subject: [PATCH] ASoC: Add DT bindings documentation for max98504 amplifier

This patch adds DT bindings documentation for Maxim MAX98504
speaker amplifier.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 .../devicetree/bindings/sound/max98504.txt         | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/max98504.txt

diff --git a/Documentation/devicetree/bindings/sound/max98504.txt b/Documentation/devicetree/bindings/sound/max98504.txt
new file mode 100644
index 000000000000..583ed5fdfb28
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98504.txt
@@ -0,0 +1,44 @@
+Maxim MAX98504 class D mono speaker amplifier
+
+This device supports I2C control interface and an IRQ output signal. It features
+a PCM and PDM digital audio interface (DAI) and a differential analog input.
+
+Required properties:
+
+ - compatible : "maxim,max98504"
+ - reg : should contain the I2C slave device address
+ - DVDD-supply, DIOVDD-supply, PVDD-supply: power supplies for the device,
+   as covered in ../regulator/regulator.txt
+ - interrupts : should specify the interrupt line the device is connected to,
+   as described in ../interrupt-controller/interrupts.txt
+
+Optional properties:
+
+ - maxim,brownout-threshold - the PVDD brownout threshold, the value must be
+   from 0, 1...21 range, corresponding to 2.6V, 2.65V...3.65V voltage range
+ - maxim,brownout-attenuation - the brownout attenuation to the speaker gain
+   applied during the "attack hold" and "timed hold" phase, the value must be
+   from 0...6 (dB) range
+ - maxim,brownout-attack-hold-ms - the brownout attack hold phase time in ms,
+   0...255 (VBATBROWN_ATTK_HOLD, register 0x0018)
+ - maxim,brownout-timed-hold-ms - the brownout timed hold phase time in ms,
+   0...255 (VBATBROWN_TIME_HOLD, register 0x0019)
+ - maxim,brownout-release-rate-ms - the brownout release phase step time in ms,
+   0...255 (VBATBROWN_RELEASE, register 0x001A)
+
+The default value when the above properties are not specified is 0,
+the maxim,brownout-threshold property must be specified to actually enable
+the PVDD brownout protection.
+
+Example:
+
+ max98504@31 {
+	compatible = "maxim,max98504";
+	reg = <0x31>;
+	interrupt-parent = <&gpio_bank_0>;
+	interrupts = <2 0>;
+
+	DVDD-supply = <&regulator>;
+	DIOVDD-supply = <&regulator>;
+	PVDD-supply = <&regulator>;
+};
-- 
2.8.1

Applied "ASoC: max98504: Add max98504 speaker amplifier driver" to the asoc tree

[Mark Brown]

The patch

   ASoC: max98504: Add max98504 speaker amplifier driver

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 4c5d1469297d14d59f5f673493bc02fc939293a4 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Wed, 29 Jun 2016 13:26:37 +0200
Subject: [PATCH] ASoC: max98504: Add max98504 speaker amplifier driver

This patch adds driver for the MAX98504 speaker amplifier.  The MAX98504
is a high efficiency mono class D amplifier that features an integrated
boost converter with voltage and current sensing ADCs for Dynamic Speaker
Management.
This driver does not include support for the I2S DAI, as we wouldn't be
able  to test such code in a hardware configuration where the amplifier
has only wired the analogue input.

Signed-off-by: Inha Song <ideal.song@samsung.com>
[k.kozlowski: rebased on 4.1]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[s.nawrocki: removed unused macro definitions, rewrote regulator supply
 related parts, rewrote regmap configuration code, added support for speaker
 enable and global chip enable through DAPM, rewritten as component driver,
 added PDM DAI definition and TDM callbacks for PDM channels configuration]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
--
Changes since v2:
 - added parsing of the VBAT brownout DT properties,
 - removed MAX98504_REG_SPEAKER_SOURCE_SELECT register initialization,
 - removed unused macro definitions.

Changes since v1:
 - none.

Changes since initial version:
 - added regulator supply handling,
 - added DAPM widges for speaker source selection,
 - added PDM DAI definition and TDM callbacks for setting up active
   PDM Tx channels and I/V sense ADC data mapping,
 - removed all optional DT properties, added regulator supply properties
   in the DT binding.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/codecs/Kconfig    |   4 +
 sound/soc/codecs/Makefile   |   2 +
 sound/soc/codecs/max98504.c | 383 ++++++++++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/max98504.h |  59 +++++++
 4 files changed, 448 insertions(+)
 create mode 100644 sound/soc/codecs/max98504.c
 create mode 100644 sound/soc/codecs/max98504.h

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 4d82a58ff6b0..b141d7816878 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -535,6 +535,10 @@ config SND_SOC_MAX98357A
 config SND_SOC_MAX98371
        tristate
 
+config SND_SOC_MAX98504
+	tristate "Maxim MAX98504 speaker amplifier"
+	depends on I2C
+
 config SND_SOC_MAX9867
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 0f548fd34ca3..fd8c477244e8 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -208,6 +208,7 @@ snd-soc-wm-hubs-objs := wm_hubs.o
 
 # Amp
 snd-soc-max9877-objs := max9877.o
+snd-soc-max98504-objs := max98504.o
 snd-soc-tpa6130a2-objs := tpa6130a2.o
 snd-soc-tas2552-objs := tas2552.o
 
@@ -419,4 +420,5 @@ obj-$(CONFIG_SND_SOC_WM_HUBS)	+= snd-soc-wm-hubs.o
 
 # Amp
 obj-$(CONFIG_SND_SOC_MAX9877)	+= snd-soc-max9877.o
+obj-$(CONFIG_SND_SOC_MAX98504)	+= snd-soc-max98504.o
 obj-$(CONFIG_SND_SOC_TPA6130A2)	+= snd-soc-tpa6130a2.o
diff --git a/sound/soc/codecs/max98504.c b/sound/soc/codecs/max98504.c
new file mode 100644
index 000000000000..a7320e709890
--- /dev/null
+++ b/sound/soc/codecs/max98504.c
@@ -0,0 +1,383 @@
+/*
+ * MAX98504 ALSA SoC Audio driver
+ *
+ * Copyright 2013 - 2014 Maxim Integrated Products
+ * Copyright 2016 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <sound/soc.h>
+
+#include "max98504.h"
+
+static const char * const max98504_supply_names[] = {
+	"DVDD",
+	"DIOVDD",
+	"PVDD",
+};
+#define MAX98504_NUM_SUPPLIES ARRAY_SIZE(max98504_supply_names)
+
+struct max98504_priv {
+	struct regmap *regmap;
+	struct regulator_bulk_data supplies[MAX98504_NUM_SUPPLIES];
+	unsigned int pcm_rx_channels;
+	bool brownout_enable;
+	unsigned int brownout_threshold;
+	unsigned int brownout_attenuation;
+	unsigned int brownout_attack_hold;
+	unsigned int brownout_timed_hold;
+	unsigned int brownout_release_rate;
+};
+
+static struct reg_default max98504_reg_defaults[] = {
+	{ 0x01,	0},
+	{ 0x02,	0},
+	{ 0x03,	0},
+	{ 0x04,	0},
+	{ 0x10, 0},
+	{ 0x11, 0},
+	{ 0x12, 0},
+	{ 0x13, 0},
+	{ 0x14, 0},
+	{ 0x15, 0},
+	{ 0x16, 0},
+	{ 0x17, 0},
+	{ 0x18, 0},
+	{ 0x19, 0},
+	{ 0x1A, 0},
+	{ 0x20, 0},
+	{ 0x21, 0},
+	{ 0x22, 0},
+	{ 0x23, 0},
+	{ 0x24, 0},
+	{ 0x25, 0},
+	{ 0x26, 0},
+	{ 0x27, 0},
+	{ 0x28, 0},
+	{ 0x30, 0},
+	{ 0x31, 0},
+	{ 0x32, 0},
+	{ 0x33, 0},
+	{ 0x34, 0},
+	{ 0x35, 0},
+	{ 0x36, 0},
+	{ 0x37, 0},
+	{ 0x38, 0},
+	{ 0x39, 0},
+	{ 0x40, 0},
+	{ 0x41, 0},
+};
+
+static bool max98504_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX98504_INTERRUPT_STATUS:
+	case MAX98504_INTERRUPT_FLAGS:
+	case MAX98504_INTERRUPT_FLAG_CLEARS:
+	case MAX98504_WATCHDOG_CLEAR:
+	case MAX98504_GLOBAL_ENABLE:
+	case MAX98504_SOFTWARE_RESET:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool max98504_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX98504_SOFTWARE_RESET:
+	case MAX98504_WATCHDOG_CLEAR:
+	case MAX98504_INTERRUPT_FLAG_CLEARS:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static int max98504_pcm_rx_ev(struct snd_soc_dapm_widget *w,
+			      struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm);
+	struct max98504_priv *max98504 = snd_soc_component_get_drvdata(c);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		regmap_write(max98504->regmap, MAX98504_PCM_RX_ENABLE,
+			     max98504->pcm_rx_channels);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		regmap_write(max98504->regmap, MAX98504_PCM_RX_ENABLE, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static int max98504_component_probe(struct snd_soc_component *c)
+{
+	struct max98504_priv *max98504 = snd_soc_component_get_drvdata(c);
+	struct regmap *map = max98504->regmap;
+	int ret;
+
+	ret = regulator_bulk_enable(MAX98504_NUM_SUPPLIES, max98504->supplies);
+	if (ret < 0)
+		return ret;
+
+	regmap_write(map, MAX98504_SOFTWARE_RESET, 0x1);
+	msleep(20);
+
+	if (!max98504->brownout_enable)
+		return 0;
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_ENABLE, 0x1);
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_CONFIG_1,
+		     (max98504->brownout_threshold & 0x1f) << 3 |
+		     (max98504->brownout_attenuation & 0x3));
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_CONFIG_2,
+		     max98504->brownout_attack_hold & 0xff);
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_CONFIG_3,
+		     max98504->brownout_timed_hold & 0xff);
+
+	regmap_write(map, MAX98504_PVDD_BROWNOUT_CONFIG_4,
+		     max98504->brownout_release_rate & 0xff);
+
+	return 0;
+}
+
+static void max98504_component_remove(struct snd_soc_component *c)
+{
+	struct max98504_priv *max98504 = snd_soc_component_get_drvdata(c);
+
+	regulator_bulk_disable(MAX98504_NUM_SUPPLIES, max98504->supplies);
+}
+
+static const char *spk_source_mux_text[] = {
+	"PCM Monomix", "Analog In", "PDM Left", "PDM Right"
+};
+
+static const struct soc_enum spk_source_mux_enum =
+	SOC_ENUM_SINGLE(MAX98504_SPEAKER_SOURCE_SELECT,
+			0, ARRAY_SIZE(spk_source_mux_text),
+			spk_source_mux_text);
+
+static const struct snd_kcontrol_new spk_source_mux =
+	SOC_DAPM_ENUM("SPK Source", spk_source_mux_enum);
+
+static const struct snd_soc_dapm_route max98504_dapm_routes[] = {
+	{ "SPKOUT", NULL, "Global Enable" },
+	{ "SPK Source", "PCM Monomix", "DAC PCM" },
+	{ "SPK Source", "Analog In", "AIN" },
+	{ "SPK Source", "PDM Left", "DAC PDM" },
+	{ "SPK Source", "PDM Right", "DAC PDM" },
+};
+
+static const struct snd_soc_dapm_widget max98504_dapm_widgets[] = {
+	SND_SOC_DAPM_SUPPLY("Global Enable", MAX98504_GLOBAL_ENABLE,
+		0, 0, NULL, 0),
+	SND_SOC_DAPM_INPUT("AIN"),
+	SND_SOC_DAPM_AIF_OUT("AIF2OUTL", "AIF2 Capture", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("AIF2OUTR", "AIF2 Capture", 1, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_DAC_E("DAC PCM", NULL, SND_SOC_NOPM, 0, 0,
+		max98504_pcm_rx_ev,
+		SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_DAC("DAC PDM", NULL, MAX98504_PDM_RX_ENABLE, 0, 0),
+	SND_SOC_DAPM_MUX("SPK Source", SND_SOC_NOPM, 0, 0, &spk_source_mux),
+	SND_SOC_DAPM_REG(snd_soc_dapm_spk, "SPKOUT",
+		MAX98504_SPEAKER_ENABLE, 0, 1, 1, 0),
+};
+
+static int max98504_set_tdm_slot(struct snd_soc_dai *dai,
+		unsigned int tx_mask, unsigned int rx_mask,
+		int slots, int slot_width)
+{
+	struct max98504_priv *max98504 = snd_soc_dai_get_drvdata(dai);
+	struct regmap *map = max98504->regmap;
+
+
+	switch (dai->id) {
+	case MAX98504_DAI_ID_PCM:
+		regmap_write(map, MAX98504_PCM_TX_ENABLE, tx_mask);
+		max98504->pcm_rx_channels = rx_mask;
+		break;
+
+	case MAX98504_DAI_ID_PDM:
+		regmap_write(map, MAX98504_PDM_TX_ENABLE, tx_mask);
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+static int max98504_set_channel_map(struct snd_soc_dai *dai,
+		unsigned int tx_num, unsigned int *tx_slot,
+		unsigned int rx_num, unsigned int *rx_slot)
+{
+	struct max98504_priv *max98504 = snd_soc_dai_get_drvdata(dai);
+	struct regmap *map = max98504->regmap;
+	unsigned int i, sources = 0;
+
+	for (i = 0; i < tx_num; i++)
+		if (tx_slot[i])
+			sources |= (1 << i);
+
+	switch (dai->id) {
+	case MAX98504_DAI_ID_PCM:
+		regmap_write(map, MAX98504_PCM_TX_CHANNEL_SOURCES,
+			     sources);
+		break;
+
+	case MAX98504_DAI_ID_PDM:
+		regmap_write(map, MAX98504_PDM_TX_CONTROL, sources);
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	regmap_write(map, MAX98504_MEASUREMENT_ENABLE, sources ? 0x3 : 0x01);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops max98504_dai_ops = {
+	.set_tdm_slot		= max98504_set_tdm_slot,
+	.set_channel_map	= max98504_set_channel_map,
+};
+
+#define MAX98504_FORMATS	(SNDRV_PCM_FMTBIT_S8|SNDRV_PCM_FMTBIT_S16_LE|\
+				SNDRV_PCM_FMTBIT_S24_LE|SNDRV_PCM_FMTBIT_S32_LE)
+#define MAX98504_PDM_RATES	(SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_16000|\
+				SNDRV_PCM_RATE_32000|SNDRV_PCM_RATE_44100|\
+				SNDRV_PCM_RATE_48000|SNDRV_PCM_RATE_88200|\
+				SNDRV_PCM_RATE_96000)
+
+static struct snd_soc_dai_driver max98504_dai[] = {
+	/* TODO: Add the PCM interface definitions */
+	{
+		.name = "max98504-aif2",
+		.id = MAX98504_DAI_ID_PDM,
+		.playback = {
+			.stream_name	= "AIF2 Playback",
+			.channels_min	= 1,
+			.channels_max	= 2,
+			.rates		= MAX98504_PDM_RATES,
+			.formats	= MAX98504_FORMATS,
+		},
+		.capture = {
+			.stream_name	= "AIF2 Capture",
+			.channels_min	= 1,
+			.channels_max	= 2,
+			.rates		= MAX98504_PDM_RATES,
+			.formats	= MAX98504_FORMATS,
+		},
+		.ops = &max98504_dai_ops,
+	},
+};
+
+static const struct snd_soc_component_driver max98504_component_driver = {
+	.probe			= max98504_component_probe,
+	.remove			= max98504_component_remove,
+	.dapm_widgets		= max98504_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(max98504_dapm_widgets),
+	.dapm_routes		= max98504_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(max98504_dapm_routes),
+};
+
+static const struct regmap_config max98504_regmap = {
+	.reg_bits		= 16,
+	.val_bits		= 8,
+	.max_register		= MAX98504_MAX_REGISTER,
+	.reg_defaults		= max98504_reg_defaults,
+	.num_reg_defaults	= ARRAY_SIZE(max98504_reg_defaults),
+	.volatile_reg		= max98504_volatile_register,
+	.readable_reg		= max98504_readable_register,
+	.cache_type		= REGCACHE_RBTREE,
+};
+
+static int max98504_i2c_probe(struct i2c_client *client,
+			      const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *node = dev->of_node;
+	struct max98504_priv *max98504;
+	int i, ret;
+
+	max98504 = devm_kzalloc(dev, sizeof(*max98504), GFP_KERNEL);
+	if (!max98504)
+		return -ENOMEM;
+
+	if (node) {
+		if (!of_property_read_u32(node, "maxim,brownout-threshold",
+					&max98504->brownout_threshold))
+			max98504->brownout_enable = true;
+
+		of_property_read_u32(node, "maxim,brownout-attenuation",
+					&max98504->brownout_attenuation);
+		of_property_read_u32(node, "maxim,brownout-attack-hold-ms",
+					&max98504->brownout_attack_hold);
+		of_property_read_u32(node, "maxim,brownout-timed-hold-ms",
+					&max98504->brownout_timed_hold);
+		of_property_read_u32(node, "maxim,brownout-release-rate-ms",
+					&max98504->brownout_release_rate);
+	}
+
+	max98504->regmap = devm_regmap_init_i2c(client, &max98504_regmap);
+	if (IS_ERR(max98504->regmap)) {
+		ret = PTR_ERR(max98504->regmap);
+		dev_err(&client->dev, "regmap initialization failed: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < MAX98504_NUM_SUPPLIES; i++)
+		max98504->supplies[i].supply = max98504_supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, MAX98504_NUM_SUPPLIES,
+				      max98504->supplies);
+	if (ret < 0)
+		return ret;
+
+	i2c_set_clientdata(client, max98504);
+
+	return devm_snd_soc_register_component(dev, &max98504_component_driver,
+				max98504_dai, ARRAY_SIZE(max98504_dai));
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id max98504_of_match[] = {
+	{ .compatible = "maxim,max98504" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, max98504_of_match);
+#endif
+
+static const struct i2c_device_id max98504_i2c_id[] = {
+	{ "max98504" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max98504_i2c_id);
+
+static struct i2c_driver max98504_i2c_driver = {
+	.driver = {
+		.name = "max98504",
+		.of_match_table = of_match_ptr(max98504_of_match),
+	},
+	.probe = max98504_i2c_probe,
+	.id_table = max98504_i2c_id,
+};
+module_i2c_driver(max98504_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC MAX98504 driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/max98504.h b/sound/soc/codecs/max98504.h
new file mode 100644
index 000000000000..afbefad2d5ce
--- /dev/null
+++ b/sound/soc/codecs/max98504.h
@@ -0,0 +1,59 @@
+/*
+ * MAX98504 ALSA SoC Audio driver
+ *
+ * Copyright 2011 - 2012 Maxim Integrated Products
+ * Copyright 2016 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef MAX98504_H_
+#define MAX98504_H_
+
+/*
+ * MAX98504 Register Definitions
+ */
+#define MAX98504_INTERRUPT_STATUS		0x01
+#define MAX98504_INTERRUPT_FLAGS		0x02
+#define MAX98504_INTERRUPT_ENABLE		0x03
+#define MAX98504_INTERRUPT_FLAG_CLEARS		0x04
+#define MAX98504_GPIO_ENABLE			0x10
+#define MAX98504_GPIO_CONFIG			0x11
+#define MAX98504_WATCHDOG_ENABLE		0x12
+#define MAX98504_WATCHDOG_CONFIG		0x13
+#define MAX98504_WATCHDOG_CLEAR			0x14
+#define MAX98504_CLOCK_MONITOR_ENABLE		0x15
+#define MAX98504_PVDD_BROWNOUT_ENABLE		0x16
+#define MAX98504_PVDD_BROWNOUT_CONFIG_1		0x17
+#define MAX98504_PVDD_BROWNOUT_CONFIG_2		0x18
+#define MAX98504_PVDD_BROWNOUT_CONFIG_3		0x19
+#define MAX98504_PVDD_BROWNOUT_CONFIG_4		0x1a
+#define MAX98504_PCM_RX_ENABLE			0x20
+#define MAX98504_PCM_TX_ENABLE			0x21
+#define MAX98504_PCM_TX_HIZ_CONTROL		0x22
+#define MAX98504_PCM_TX_CHANNEL_SOURCES		0x23
+#define MAX98504_PCM_MODE_CONFIG		0x24
+#define MAX98504_PCM_DSP_CONFIG			0x25
+#define MAX98504_PCM_CLOCK_SETUP		0x26
+#define MAX98504_PCM_SAMPLE_RATE_SETUP		0x27
+#define MAX98504_PCM_TO_SPEAKER_MONOMIX		0x28
+#define MAX98504_PDM_TX_ENABLE			0x30
+#define MAX98504_PDM_TX_HIZ_CONTROL		0x31
+#define MAX98504_PDM_TX_CONTROL			0x32
+#define MAX98504_PDM_RX_ENABLE			0x33
+#define MAX98504_SPEAKER_ENABLE			0x34
+#define MAX98504_SPEAKER_SOURCE_SELECT		0x35
+#define MAX98504_MEASUREMENT_ENABLE		0x36
+#define MAX98504_ANALOGUE_INPUT_GAIN		0x37
+#define MAX98504_TEMPERATURE_LIMIT_CONFIG	0x38
+#define MAX98504_GLOBAL_ENABLE			0x40
+#define MAX98504_SOFTWARE_RESET			0x41
+#define MAX98504_REV_ID				0x7fff
+
+#define MAX98504_MAX_REGISTER			0x7fff
+
+#define MAX98504_DAI_ID_PCM			1
+#define MAX98504_DAI_ID_PDM			2
+
+#endif /* MAX98504_H_ */
-- 
2.8.1