public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Varadarajan Narayanan <varada@codeaurora.org>
Cc: Andy Gross <andy.gross@linaro.org>,
	Mark Brown <broonie@kernel.org>broonie@kernel.org,
	robh+dt@kernel.org, mark.rutland@arm.comandy.gross@linaro.org,
	david.brown@linaro.org, linux-spi@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org,
	linux-soc@vger.kernel.orglinux-spi@vger.kernel.org
Subject: Applied "spi: qup: Fix transaction done signaling" to the spi tree
Date: Tue, 08 Aug 2017 12:18:24 +0100	[thread overview]
Message-ID: <E1df2Wm-0006Lq-FG@finisterre> (raw)
In-Reply-To: <1497949857-1852-8-git-send-email-varada@codeaurora.org>

The patch

   spi: qup: Fix transaction done signaling

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From ce7dfc71c1123a4bc7ddc628fc759ede0f58a2fe Mon Sep 17 00:00:00 2001
From: Varadarajan Narayanan <varada@codeaurora.org>
Date: Fri, 28 Jul 2017 12:22:53 +0530
Subject: [PATCH] spi: qup: Fix transaction done signaling

Wait to signal done until we get all of the interrupts we are expecting
to get for a transaction.  If we don't wait for the input done flag, we
can be in between transactions when the done flag comes in and this can
mess up the next transaction.

While here cleaning up the code which sets controller->xfer = NULL and
restores it in the ISR. This looks to be some debug code which is not
required.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-qup.c | 27 +++++----------------------
 1 file changed, 5 insertions(+), 22 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index ef952946375a..a7c630c4788c 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -409,29 +409,16 @@ static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer,
 static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 {
 	struct spi_qup *controller = dev_id;
-	struct spi_transfer *xfer;
+	struct spi_transfer *xfer = controller->xfer;
 	u32 opflags, qup_err, spi_err;
-	unsigned long flags;
 	int error = 0;
 
-	spin_lock_irqsave(&controller->lock, flags);
-	xfer = controller->xfer;
-	controller->xfer = NULL;
-	spin_unlock_irqrestore(&controller->lock, flags);
-
 	qup_err = readl_relaxed(controller->base + QUP_ERROR_FLAGS);
 	spi_err = readl_relaxed(controller->base + SPI_ERROR_FLAGS);
 	opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
 
 	writel_relaxed(qup_err, controller->base + QUP_ERROR_FLAGS);
 	writel_relaxed(spi_err, controller->base + SPI_ERROR_FLAGS);
-	writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
-
-	if (!xfer) {
-		dev_err_ratelimited(controller->dev, "unexpected irq %08x %08x %08x\n",
-				    qup_err, spi_err, opflags);
-		return IRQ_HANDLED;
-	}
 
 	if (qup_err) {
 		if (qup_err & QUP_ERROR_OUTPUT_OVER_RUN)
@@ -455,7 +442,9 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 		error = -EIO;
 	}
 
-	if (!spi_qup_is_dma_xfer(controller->mode)) {
+	if (spi_qup_is_dma_xfer(controller->mode)) {
+		writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
+	} else {
 		if (opflags & QUP_OP_IN_SERVICE_FLAG)
 			spi_qup_fifo_read(controller, xfer);
 
@@ -463,12 +452,7 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 			spi_qup_fifo_write(controller, xfer);
 	}
 
-	spin_lock_irqsave(&controller->lock, flags);
-	controller->error = error;
-	controller->xfer = xfer;
-	spin_unlock_irqrestore(&controller->lock, flags);
-
-	if (controller->rx_bytes == xfer->len || error)
+	if ((opflags & QUP_OP_MAX_INPUT_DONE_FLAG) || error)
 		complete(&controller->done);
 
 	return IRQ_HANDLED;
@@ -666,7 +650,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
 exit:
 	spi_qup_set_state(controller, QUP_STATE_RESET);
 	spin_lock_irqsave(&controller->lock, flags);
-	controller->xfer = NULL;
 	if (!ret)
 		ret = controller->error;
 	spin_unlock_irqrestore(&controller->lock, flags);
-- 
2.13.2

  reply	other threads:[~2017-08-08 11:18 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-20  9:10 [PATCH v3 00/15] spi: qup: Fixes and add support for >64k transfers Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 01/15] spi: qup: Enable chip select support Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 02/15] spi: qup: Setup DMA mode correctly Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 03/15] spi: qup: Add completion structures for DMA Varadarajan Narayanan
     [not found] ` <1497949857-1852-1-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-06-20  9:10   ` [PATCH v3 04/15] spi: qup: Add completion timeout Varadarajan Narayanan
2017-06-20  9:10   ` [PATCH v3 13/15] spi: qup: allow multiple DMA transactions per spi xfer Varadarajan Narayanan
2017-06-20  9:10   ` [PATCH v3 14/15] spi: qup: Ensure done detection Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 05/15] spi: qup: Place the QUP in run mode before DMA Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 06/15] spi: qup: Fix error handling in spi_qup_prep_sg Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 07/15] spi: qup: Fix transaction done signaling Varadarajan Narayanan
2017-08-08 11:18   ` Mark Brown [this message]
2017-06-20  9:10 ` [PATCH v3 08/15] spi: qup: Do block sized read/write in block mode Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 09/15] spi: qup: refactor spi_qup_io_config into two functions Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 10/15] spi: qup: call io_config in mode specific function Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 11/15] spi: qup: allow block mode to generate multiple transactions Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 12/15] spi: qup: refactor spi_qup_prep_sg Varadarajan Narayanan
2017-06-20  9:10 ` [PATCH v3 15/15] spi: qup: support for qup v1 dma Varadarajan Narayanan
2017-06-23 21:49   ` Rob Herring
2017-06-27  9:36     ` Varadarajan Narayanan
2017-06-28  6:47     ` Andy Gross

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1df2Wm-0006Lq-FG@finisterre \
    --to=broonie@kernel.org \
    --cc=andy.gross@linaro.org \
    --cc=varada@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox