Re: [PATCH v5 2/5] dt-bindings: clock: spacemit: Add spacemit,k1-pll

[Haylen Chu <heylenay@4d2.org>]

On Fri, Mar 07, 2025 at 12:29:43AM +0000, Yixun Lan wrote:
> Hi Haylen:
> 
> On 17:57 Thu 06 Mar     , Haylen Chu wrote:
> > Add definition for the PLL found on Spacemit K1 SoC, which takes the
> > external 24MHz oscillator as input and generates clocks in various
> > frequencies for the system.
> > 
> > Signed-off-by: Haylen Chu <heylenay@4d2.org>
> > ---
> >  .../bindings/clock/spacemit,k1-pll.yaml       | 50 +++++++++++++++++++
> >  include/dt-bindings/clock/spacemit,k1-ccu.h   | 37 ++++++++++++++
> >  2 files changed, 87 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml b/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml
> > new file mode 100644
> > index 000000000000..23d7aa1bc573
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml
> > @@ -0,0 +1,50 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/spacemit,k1-pll.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Spacemit K1 PLL
> > +
> > +maintainers:
> > +  - Haylen Chu <heylenay@4d2.org>
> > +
> > +properties:
> > +  compatible:
> > +    const: spacemit,k1-pll
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    description: External 24MHz oscillator
> > +
> > +  spacemit,mpmu:
> how about naming it as "spacemit,mpmu-syscon" explicitly?
> to indicate this is a syscon phandle, it's more readable

It's okay but I'm not sure whether this helps a lot... will wait for the
maintainer to decide the name.

> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      Phandle to the "Main PMU (MPMU)" syscon. It is used to check PLL
> > +      lock status.
> > +
> > +  "#clock-cells":
> > +    const: 1
> > +    description:
> > +      See <dt-bindings/clock/spacemit,k1-ccu.h> for valid indices.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - spacemit,mpmu
> > +  - "#clock-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    clock-controller@d4090000 {
> > +        compatible = "spacemit,k1-pll";
> > +        reg = <0xd4090000 0x1000>;
> > +        clocks = <&vctcxo_24m>;
> > +        spacemit,mpmu = <&sysctl_mpmu>;
> > +        #clock-cells = <1>;
> > +    };
> -- 

...

> Yixun Lan (dlan)
> Gentoo Linux Developer
> GPG Key ID AABEFD55

Best regards,
Haylen Chu