[PATCH AUTOSEL 6.8 11/98] arm64: dts: qcom: sdm630: add USB QMP PHY support

[PATCH AUTOSEL 6.8 11/98] arm64: dts: qcom: sdm630: add USB QMP PHY support

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit bb5009a24ec3f2f2ec1e2ed7b8a5dcde9a9e28d9 ]

Define USB3 QMP PHY presend on the SDM630 / SDM660 platforms. Enable it by
default in the USB3 host, but (for compatibility), force USB 2.0 mode
for all defined boards. The boards should opt-in to enable USB 3.0
support.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-3-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/qcom/sda660-inforce-ifc6560.dts  |  6 ++++
 .../dts/qcom/sdm630-sony-xperia-nile.dtsi     |  6 ++++
 arch/arm64/boot/dts/qcom/sdm630.dtsi          | 36 ++++++++++++++-----
 .../boot/dts/qcom/sdm660-xiaomi-lavender.dts  |  6 ++++
 4 files changed, 46 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 2ed39d402d3f6..21fae799c816a 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -454,10 +454,16 @@ &usb2_dwc3 {
 };
 
 &usb3 {
+	qcom,select-utmi-as-pipe-clk;
+
 	status = "okay";
 };
 
 &usb3_dwc3 {
+	maximum-speed = "high-speed";
+	phys = <&qusb2phy0>;
+	phy-names = "usb2-phy";
+
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 87d0293c728d8..f06a9f0cf97c1 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -658,10 +658,16 @@ cam_vdig_default: cam-vdig-default-state {
 };
 
 &usb3 {
+	qcom,select-utmi-as-pipe-clk;
+
 	status = "okay";
 };
 
 &usb3_dwc3 {
+	maximum-speed = "high-speed";
+	phys = <&qusb2phy0>;
+	phy-names = "usb2-phy";
+
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 513fe5e76b688..28489fb58b200 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1286,7 +1286,6 @@ usb3: usb@a8f8800 {
 			interrupt-names = "hs_phy_irq", "ss_phy_irq";
 
 			power-domains = <&gcc USB_30_GDSC>;
-			qcom,select-utmi-as-pipe-clk;
 
 			resets = <&gcc GCC_USB_30_BCR>;
 
@@ -1297,17 +1296,38 @@ usb3_dwc3: usb@a800000 {
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 
-				/*
-				 * SDM630 technically supports USB3 but I
-				 * haven't seen any devices making use of it.
-				 */
-				maximum-speed = "high-speed";
-				phys = <&qusb2phy0>;
-				phy-names = "usb2-phy";
+				phys = <&qusb2phy0>, <&usb3_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 			};
 		};
 
+		usb3_qmpphy: phy@c010000 {
+			compatible = "qcom,sdm660-qmp-usb3-phy";
+			reg = <0x0c010000 0x1000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+			status = "disabled";
+		};
+
 		qusb2phy0: phy@c012000 {
 			compatible = "qcom,sdm660-qusb2-phy";
 			reg = <0x0c012000 0x180>;
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 3c47410ba94c0..7167f75bced3f 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -413,10 +413,16 @@ &tlmm {
 };
 
 &usb3 {
+	qcom,select-utmi-as-pipe-clk;
+
 	status = "okay";
 };
 
 &usb3_dwc3 {
+	maximum-speed = "high-speed";
+	phys = <&qusb2phy0>;
+	phy-names = "usb2-phy";
+
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
-- 
2.43.0

[PATCH AUTOSEL 6.8 12/98] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 319a12e7c399df4316f54f6cc83cd6cdffb4ec4a ]

The Inforce IFC6560 board actually has USB SS lines routed to the USB-C
connector. Enable USB 3.0 PHY and SS mode for the USB3 host.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-4-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 21fae799c816a..702ab49bbc594 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -454,16 +454,15 @@ &usb2_dwc3 {
 };
 
 &usb3 {
-	qcom,select-utmi-as-pipe-clk;
-
 	status = "okay";
 };
 
 &usb3_dwc3 {
-	maximum-speed = "high-speed";
-	phys = <&qusb2phy0>;
-	phy-names = "usb2-phy";
-
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
+
+&usb3_qmpphy {
+	vdda-phy-supply = <&vreg_l1b_0p925>;
+	status = "okay";
+};
-- 
2.43.0

[PATCH AUTOSEL 6.8 13/98] arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S

[Sasha Levin]

From: Joe Mason <buddyjojo06@outlook.com>

[ Upstream commit 6016fb7c91f72f4afbb4017e13cd91954d0f1a9b ]

Add a device tree for the Xiaomi Redmi Note 9S (curtana) phone, based on
sm7125-xiaomi-common.dtsi.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20240121-sm7125-upstream-v4-8-f7d1212c8ebb@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/Makefile                |  1 +
 .../boot/dts/qcom/sm7125-xiaomi-curtana.dts      | 16 ++++++++++++++++
 2 files changed, 17 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 39889d5f8e123..2e6984bbbb836 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -210,6 +210,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-curtana.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-joyeuse.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts
new file mode 100644
index 0000000000000..12f517a8492c3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-curtana.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023, Joe Mason <buddyjojo06@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "sm7125-xiaomi-common.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 9S";
+	compatible = "xiaomi,curtana", "qcom,sm7125";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0x20022 1>;
+};
-- 
2.43.0

[PATCH AUTOSEL 6.8 29/98] ARM: dts: rockchip: fix rk3288 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 585e4dc07100a6465b3da8d24e46188064c1c925 ]

Fix rk3288 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding with some reordering
to align with the (new) documentation about
property ordering.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/cc3a9b4f-076d-4660-b464-615003b6a066@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rockchip/rk3288.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
index ead343dc3df10..3f1d640afafae 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -1240,27 +1240,37 @@ hdmi: hdmi@ff980000 {
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0x0 0xff980000 0x0 0x20000>;
 		reg-io-width = <4>;
-		#sound-dai-cells = <0>;
-		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
 		clock-names = "iahb", "isfr", "cec";
 		power-domains = <&power RK3288_PD_VIO>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				hdmi_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_hdmi>;
 				};
+
 				hdmi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0

[PATCH AUTOSEL 6.8 30/98] ARM: dts: rockchip: fix rk322x hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 15a5ed03000cf61daf87d14628085cb1bc8ae72c ]

Fix rk322x hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/9b84adf0-9312-47fd-becc-cadd06941f70@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rockchip/rk322x.dtsi | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi
index 831561fc18146..96421355c2746 100644
--- a/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -736,14 +736,20 @@ hdmi: hdmi@200a0000 {
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				hdmi_in_vop: endpoint@0 {
-					reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
+				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0

[PATCH AUTOSEL 6.8 31/98] arm64: dts: rockchip: fix rk3328 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c ]

Fix rk3328 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/e5dea3b7-bf84-4474-9530-cc2da3c41104@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 7b4c15c4a9c31..b6f045069ee2f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -744,11 +744,20 @@ hdmi: hdmi@ff3c0000 {
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
 				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0

[PATCH AUTOSEL 6.8 32/98] arm64: dts: rockchip: fix rk3399 hdmi ports node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit f051b6ace7ffcc48d6d1017191f167c0a85799f6 ]

Fix rk3399 hdmi ports node so that it matches the
rockchip,dw-hdmi.yaml binding.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/a6ab6f75-3b80-40b1-bd30-3113e14becdd@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 6e12c5a920cab..fe818a2700aa7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1956,6 +1956,7 @@ simple-audio-card,codec {
 	hdmi: hdmi@ff940000 {
 		compatible = "rockchip,rk3399-dw-hdmi";
 		reg = <0x0 0xff940000 0x0 0x20000>;
+		reg-io-width = <4>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
@@ -1964,13 +1965,16 @@ hdmi: hdmi@ff940000 {
 			 <&cru PLL_VPLL>;
 		clock-names = "iahb", "isfr", "cec", "grf", "ref";
 		power-domains = <&power RK3399_PD_HDCP>;
-		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
 		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1983,6 +1987,10 @@ hdmi_in_vopl: endpoint@1 {
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
-- 
2.43.0

[PATCH AUTOSEL 6.8 33/98] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected

[Sasha Levin]

From: Bjorn Andersson <quic_bjorande@quicinc.com>

[ Upstream commit 7c6bef576a8891abce08d448165b53328032aa5f ]

The SC7280 GCC binding describes clocks which, due to the difference in
security model, are not accessible on the RB3gen2 - in the same way seen
on QCM6490.

Mark these clocks as protected, to allow the board to boot. In contrast
to the present QCM6490 boards GCC_EDP_CLKREF_EN is left out, as this
does not need to be "protected" and is used on the RB3Gen2 board.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240209-qcm6490-gcc-protected-clocks-v2-1-11cd5fc13bd0@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 8bb7d13d85f66..ebbe2c1123f6e 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -413,6 +413,23 @@ vreg_bob_3p296: bob {
 	};
 };
 
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
-- 
2.43.0

[PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 61474b18e762671a69b2df9665f3cec5c87a38af ]

Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 2 +-
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi                     | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index eb657e544961d..5fca27f668a5b 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -1204,7 +1204,7 @@ &usb_1_role_switch {
 };
 
 &vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 
 	vdd-micb-supply = <&vreg_s10b>;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index febf28356ff8b..38351e8ea8b33 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2978,7 +2978,7 @@ data-pins {
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -2994,7 +2994,7 @@ data-pins {
 				};
 			};
 
-			dmic02_sleep: dmic02-sleep-state {
+			dmic23_sleep: dmic23-sleep-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
-- 
2.43.0

Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names

[Johan Hovold]

On Fri, Mar 29, 2024 at 08:37:07AM -0400, Sasha Levin wrote:
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> [ Upstream commit 61474b18e762671a69b2df9665f3cec5c87a38af ]
> 
> Correct the TLMM pin configuration and muxing node names used for DMIC2
> and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
> improves code readability and avoids any confusion when reading the DTS.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Link: https://lore.kernel.org/r/20240212172335.124845-1-krzysztof.kozlowski@linaro.org
> Signed-off-by: Bjorn Andersson <andersson@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

This is not a bug fix. Please drop from all stable queues (e.g. 6.8 and
6.6).

Johan

Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names

[Krzysztof Kozlowski]

On 02/04/2024 09:23, Johan Hovold wrote:
> On Fri, Mar 29, 2024 at 08:37:07AM -0400, Sasha Levin wrote:
>> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> [ Upstream commit 61474b18e762671a69b2df9665f3cec5c87a38af ]
>>
>> Correct the TLMM pin configuration and muxing node names used for DMIC2
>> and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
>> improves code readability and avoids any confusion when reading the DTS.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Link: https://lore.kernel.org/r/20240212172335.124845-1-krzysztof.kozlowski@linaro.org
>> Signed-off-by: Bjorn Andersson <andersson@kernel.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
> 
> This is not a bug fix. Please drop from all stable queues (e.g. 6.8 and
> 6.6).

I should just avoid names "fix" and "correct" :)

Best regards,
Krzysztof

Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names

[Sasha Levin]

On Tue, Apr 02, 2024 at 12:17:08PM +0200, Krzysztof Kozlowski wrote:
>On 02/04/2024 09:23, Johan Hovold wrote:
>> On Fri, Mar 29, 2024 at 08:37:07AM -0400, Sasha Levin wrote:
>>> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>>
>>> [ Upstream commit 61474b18e762671a69b2df9665f3cec5c87a38af ]
>>>
>>> Correct the TLMM pin configuration and muxing node names used for DMIC2
>>> and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
>>> improves code readability and avoids any confusion when reading the DTS.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> Link: https://lore.kernel.org/r/20240212172335.124845-1-krzysztof.kozlowski@linaro.org
>>> Signed-off-by: Bjorn Andersson <andersson@kernel.org>
>>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>>
>> This is not a bug fix. Please drop from all stable queues (e.g. 6.8 and
>> 6.6).
>
>I should just avoid names "fix" and "correct" :)

I'll drop it, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 6.8 37/98] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 0d3eb7ff1f3a994a5b3e49a9bd48f0c2f3c80ef5 ]

Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 2 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index a20d5d76af352..5a6e0b34934cb 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -1147,7 +1147,7 @@ &usb_1_qmpphy_usb_ss_in {
 };
 
 &vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 	vdd-micb-supply = <&vreg_s10b_1p8>;
 	qcom,dmic-sample-rate = <600000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 01e4dfc4babd2..0a802c9a3c8f7 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -3934,7 +3934,7 @@ data-pins {
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
-- 
2.43.0

[PATCH AUTOSEL 6.8 38/98] arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit c6e5bf9278749eaa094dc944add747f10a15dceb ]

Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ee1ba5a8c8fc2..a6663eefd3a30 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2507,7 +2507,7 @@ data-pins {
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
-- 
2.43.0

[PATCH AUTOSEL 6.8 39/98] arm64: dts: sm8650: correct DMIC2 and DMIC3 pin config node names

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 94c312767160f0d527da035b9080ff5675d17f4c ]

Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 2df77123a8c7b..27b3917c13277 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -2919,7 +2919,7 @@ data-pins {
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
-- 
2.43.0