[PATCH v5 0/3] iio: adc: qcom-pm8xxx-xoadc: add support for reading channel labels from DT

[PATCH v5 0/3] iio: adc: qcom-pm8xxx-xoadc: add support for reading channel labels from DT

[Antony Kurniawan Soemardi]

This series adds support for reading channel labels from the device tree
in the Qualcomm PM8xxx XOADC driver, along with the corresponding DT
updates for the PM8921 PMIC. Also removes the redundant error logs when
reading values, as returning -EINVAL and -ETIMEDOUT are sufficient to
report failures.

This series also includes minor refactoring, such as removing redundant
error loggings.

Tested on Sony Xperia SP (PM8921):
> cat /sys/bus/iio/devices/iio\:device0/in_voltage7_label
usb_vbus
> cat /sys/bus/iio/devices/iio\:device0/in_temp12_label
ref_muxoff
> sensors
iio_hwmon-isa-0000
Adapter: ISA adapter
vbat:        267.86 V
dcin:          4.82 kV
...
chg_temp:    +1071.4°C

Note: the sensor readings above are incorrect due to pending calibration
fixes are not included in this series. This patch only addresses label
visibility. The values are expected to be wrong until the calibration
fixes lands separately.

---
Changes in v5:
- Drop constify pointers patch as it causes build failures
- Link to v4: https://patch.msgid.link/20260426-pm8xxx-xoadc-label-v4-0-0ec782362615@smankusors.com

Changes in v4:
- Constify pointers in read operations
- Reworked wait_for_completion_timeout() handling
- Updated variable declaration style in pm8xxx_read_label()
- Link to v3: https://lore.kernel.org/r/20260405-pm8xxx-xoadc-label-v3-0-9fe179c283ec@smankusors.com

Changes in v3:
- Simplify label assignment logic by removing the unnecessary
  conditional branch
- Remove redundant error logging in pm8xxx_read_channel_rsv, since
  -ETIMEDOUT is sufficient to report failures.
- Link to v2: https://lore.kernel.org/r/20260403-pm8xxx-xoadc-label-v2-0-29b50bf821e6@smankusors.com

Changes in v2:
- Remove redundant error logging in pm8xxx_read_raw, since -EINVAL is
  sufficient to report failures.
- Reword the uncommon Tested-by commit tag to freeform text
- Link to v1: https://lore.kernel.org/r/20260326-pm8xxx-xoadc-label-v1-0-027805dad4db@smankusors.com

Changes since original patch:
- The label is now read from the platform description (device tree)
  instead of the internal datasheet name.
- Link to original patch:
  https://lore.kernel.org/all/20251028-pm8xxx-xoadc-fix-v1-1-b000e1036e41@smankusors.com/

---
Antony Kurniawan Soemardi (3):
      ARM: dts: qcom: pm8921: add labels for ADC channels
      iio: adc: qcom-pm8xxx-xoadc: remove redundant error logs when reading values
      iio: adc: qcom-pm8xxx-xoadc: add support for reading channel labels

 arch/arm/boot/dts/qcom/pm8921.dtsi  | 12 +++++++++++
 drivers/iio/adc/qcom-pm8xxx-xoadc.c | 40 +++++++++++++++++++++----------------
 2 files changed, 35 insertions(+), 17 deletions(-)
---
base-commit: 27d128c1cff64c3b8012cc56dd5a1391bb4f1821
change-id: 20260321-pm8xxx-xoadc-label-47afdf7f06a9

Best regards,
--  
Antony Kurniawan Soemardi <linux@smankusors.com>

[PATCH v5 1/3] ARM: dts: qcom: pm8921: add labels for ADC channels

[Antony Kurniawan Soemardi]

Add label properties to all XOADC ADC channel nodes in the PM8921 PMIC
device tree. This allows userspace and drivers to identify channels by
name rather than relying on datasheet name.

Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
---
 arch/arm/boot/dts/qcom/pm8921.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index 535cb6a2543f..15246f4bd267 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -75,50 +75,62 @@ pm8921_xoadc: xoadc@197 {
 
 			vcoin: adc-channel@0 {
 				reg = <0x00 0x00>;
+				label = "vcoin";
 			};
 
 			vbat: adc-channel@1 {
 				reg = <0x00 0x01>;
+				label = "vbat";
 			};
 
 			dcin: adc-channel@2 {
 				reg = <0x00 0x02>;
+				label = "dcin";
 			};
 
 			vph_pwr: adc-channel@4 {
 				reg = <0x00 0x04>;
+				label = "vph_pwr";
 			};
 
 			batt_therm: adc-channel@8 {
 				reg = <0x00 0x08>;
+				label = "batt_therm";
 			};
 
 			batt_id: adc-channel@9 {
 				reg = <0x00 0x09>;
+				label = "batt_id";
 			};
 
 			usb_vbus: adc-channel@a {
 				reg = <0x00 0x0a>;
+				label = "usb_vbus";
 			};
 
 			die_temp: adc-channel@b {
 				reg = <0x00 0x0b>;
+				label = "die_temp";
 			};
 
 			ref_625mv: adc-channel@c {
 				reg = <0x00 0x0c>;
+				label = "ref_625mv";
 			};
 
 			ref_1250mv: adc-channel@d {
 				reg = <0x00 0x0d>;
+				label = "ref_1250mv";
 			};
 
 			chg_temp: adc-channel@e {
 				reg = <0x00 0x0e>;
+				label = "chg_temp";
 			};
 
 			ref_muxoff: adc-channel@f {
 				reg = <0x00 0x0f>;
+				label = "ref_muxoff";
 			};
 		};
 	};

-- 
2.34.1

[PATCH v5 2/3] iio: adc: qcom-pm8xxx-xoadc: remove redundant error logs when reading values

[Antony Kurniawan Soemardi]

Drop dev_err() logging for -EINVAL and -ETIMEDOUT cases and rely on
return values to report errors, reducing unnecessary log noise.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
---
 drivers/iio/adc/qcom-pm8xxx-xoadc.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index 31f88cf7f7f1..89858e81c859 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -535,10 +535,8 @@ static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc,
 		goto unlock;
 
 	/* Next the interrupt occurs */
-	ret = wait_for_completion_timeout(&adc->complete,
-					  VADC_CONV_TIME_MAX_US);
-	if (!ret) {
-		dev_err(adc->dev, "conversion timed out\n");
+	if (!wait_for_completion_timeout(&adc->complete,
+					 VADC_CONV_TIME_MAX_US)) {
 		ret = -ETIMEDOUT;
 		goto unlock;
 	}
@@ -657,11 +655,8 @@ static int pm8xxx_read_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_PROCESSED:
 		ch = pm8xxx_get_channel(adc, chan->address);
-		if (!ch) {
-			dev_err(adc->dev, "no such channel %lu\n",
-				chan->address);
+		if (!ch)
 			return -EINVAL;
-		}
 		ret = pm8xxx_read_channel(adc, ch, &adc_code);
 		if (ret)
 			return ret;
@@ -677,11 +672,8 @@ static int pm8xxx_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_RAW:
 		ch = pm8xxx_get_channel(adc, chan->address);
-		if (!ch) {
-			dev_err(adc->dev, "no such channel %lu\n",
-				chan->address);
+		if (!ch)
 			return -EINVAL;
-		}
 		ret = pm8xxx_read_channel(adc, ch, &adc_code);
 		if (ret)
 			return ret;

-- 
2.34.1

[PATCH v5 3/3] iio: adc: qcom-pm8xxx-xoadc: add support for reading channel labels

[Antony Kurniawan Soemardi]

Implement the .read_label callback to allow userspace to identify ADC
channels via the "label" property in the device tree. The name field in
pm8xxx_chan_info is renamed to label to better reflect its purpose. If
no label is provided in the device tree, it defaults to the hardware
datasheet name.

The change has been tested on Sony Xperia SP (PM8921).

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
---
 drivers/iio/adc/qcom-pm8xxx-xoadc.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index 89858e81c859..d44eab7b36a8 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -369,7 +369,7 @@ static const struct xoadc_channel pm8921_xoadc_channels[] = {
 
 /**
  * struct pm8xxx_chan_info - ADC channel information
- * @name: name of this channel
+ * @label: label of this channel from device tree (defaults to datasheet name if not specified)
  * @hwchan: pointer to hardware channel information (muxing & scaling settings)
  * @calibration: whether to use absolute or ratiometric calibration
  * @decimation: 0,1,2,3
@@ -377,7 +377,7 @@ static const struct xoadc_channel pm8921_xoadc_channels[] = {
  * calibration: 0, 1, 2, 4, 5.
  */
 struct pm8xxx_chan_info {
-	const char *name;
+	const char *label;
 	const struct xoadc_channel *hwchan;
 	enum vadc_calibration calibration;
 	u8 decimation:2;
@@ -446,7 +446,7 @@ static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc,
 	u8 lsb, msb;
 
 	dev_dbg(adc->dev, "read channel \"%s\", amux %d, prescale/mux: %d, rsv %d\n",
-		ch->name, ch->hwchan->amux_channel, ch->hwchan->pre_scale_mux, rsv);
+		ch->label, ch->hwchan->amux_channel, ch->hwchan->pre_scale_mux, rsv);
 
 	mutex_lock(&adc->lock);
 
@@ -717,8 +717,21 @@ static int pm8xxx_fwnode_xlate(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
+static int pm8xxx_read_label(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, char *label)
+{
+	struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
+	const struct pm8xxx_chan_info *ch;
+
+	ch = pm8xxx_get_channel(adc, chan->address);
+	if (!ch)
+		return -EINVAL;
+	return sysfs_emit(label, "%s\n", ch->label);
+}
+
 static const struct iio_info pm8xxx_xoadc_info = {
 	.fwnode_xlate = pm8xxx_fwnode_xlate,
+	.read_label = pm8xxx_read_label,
 	.read_raw = pm8xxx_read_raw,
 };
 
@@ -762,7 +775,8 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
 			pre_scale_mux, amux_channel);
 		return -EINVAL;
 	}
-	ch->name = name;
+	ch->label = hwchan->datasheet_name;
+	fwnode_property_read_string(fwnode, "label", &ch->label);
 	ch->hwchan = hwchan;
 	/* Everyone seems to use absolute calibration except in special cases */
 	ch->calibration = VADC_CALIB_ABSOLUTE;
@@ -804,7 +818,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
 
 	dev_dbg(dev,
 		"channel [PRESCALE/MUX: %02x AMUX: %02x] \"%s\" ref voltage: %d, decimation %d prescale %d/%d, scale function %d\n",
-		hwchan->pre_scale_mux, hwchan->amux_channel, ch->name,
+		hwchan->pre_scale_mux, hwchan->amux_channel, ch->label,
 		ch->amux_ip_rsv, ch->decimation, hwchan->prescale.numerator,
 		hwchan->prescale.denominator, hwchan->scale_fn_type);
 

-- 
2.34.1

Re: [PATCH v5 2/3] iio: adc: qcom-pm8xxx-xoadc: remove redundant error logs when reading values

[Andy Shevchenko]

On Sun, Apr 26, 2026 at 08:14:46PM +0000, Antony Kurniawan Soemardi wrote:
> Drop dev_err() logging for -EINVAL and -ETIMEDOUT cases and rely on
> return values to report errors, reducing unnecessary log noise.

The comments from v4 are still applicable to this version.

-- 
With Best Regards,
Andy Shevchenko