Re: [PATCH 0/2] regulator: add support for SGMicro SGM3804

[Mark Brown <broonie@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1672 bytes --]

On Sun, May 10, 2026 at 11:45:25PM +0700, Alexandre Hamamdjian via B4 Relay wrote:
> This series adds support for the SGMicro SGM3804, an I2C-controlled
> positive/negative output charge-pump regulator. The chip is used to
> generate the AVDD/AVEE rails for display panels and is present on the
> Ayaneo Pocket DS handheld, where it powers the panel and is required
> before any panel driver can light up the display.

There is a separate series from Neil Armstrong (Cced) already in review
for the same part.  Please sort out what to do about this between
yourselves.

> 
> The Ayaneo Pocket DS device tree, posted as a separate series, depends
> on the binding introduced here to describe its panel power supply, so
> this series is a prerequisite for that work and for any subsequent
> panel-related patches targeting the same board.
> 
> Signed-off-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
> ---
> Alexandre Hamamdjian (2):
>       dt-bindings: regulator: add SGMicro SGM3804
>       regulator: sgm3804: add SGMicro SGM3804 charge-pump regulator driver
> 
>  .../bindings/regulator/sgmicro,sgm3804.yaml        |  60 ++++++++
>  MAINTAINERS                                        |   7 +
>  drivers/regulator/Kconfig                          |  11 ++
>  drivers/regulator/Makefile                         |   1 +
>  drivers/regulator/sgm3804-regulator.c              | 164 +++++++++++++++++++++
>  5 files changed, 243 insertions(+)
> ---
> base-commit: e98d21c170b01ddef366f023bbfcf6b31509fa83
> change-id: 20260510-sgm3804-c37a0ae6d7f3
> 
> Best regards,
> --  
> Alexandre Hamamdjian <azkali.limited@gmail.com>
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]