Devicetree
 help / color / mirror / Atom feed
From: Bjorn Andersson <andersson@kernel.org>
To: Mahadevan P <mahadevan.p@oss.qualcomm.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	 cros-qcom-dts-watchers@chromium.org,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	Mahadevan P <mahap@qti.qualcomm.com>
Subject: Re: [PATCH v2 0/3] arm64: dts: qcom: kodiak: Enable 4-lane DP via QMP Combo PHY
Date: Thu, 21 May 2026 22:41:17 -0500	[thread overview]
Message-ID: <ag_QL5DIo7MxsdYU@baldur> (raw)
In-Reply-To: <20260429-kodiak_v2-v2-0-c3a703cc30eb@oss.qualcomm.com>

On Wed, Apr 29, 2026 at 12:10:39PM +0530, Mahadevan P wrote:
> This series enables full 4-lane DisplayPort operation on SC7280/kodiak
> platforms by wiring up the QMP Combo PHY correctly and consolidating
> the DP endpoint configuration in the SoC dtsi.
> 
> Patch 1 adds mode-switch to the QMP Combo PHY node in kodiak.dtsi,
> which is required for the PHY to respond to USB-C Alternate Mode
> negotiation and switch into 4-lane DP configuration.
> 
> Patch 2 moves the data-lanes property from individual board files into
> kodiak.dtsi since the PHY-to-controller wiring is fixed in silicon.
> It also removes redundant remote-endpoint and orientation-switch
> overrides from qcs6490-rb3gen2 and qcs6490-thundercomm-rubikpi3 that
> are already covered by the SoC dtsi.
> 
> Patch 3 updates data-lanes from <0 1> to <0 1 2 3> in kodiak.dtsi now
> that mode-switch is in place, enabling the full 4-lane DP link.

Are you sure that herobrine has 4 lanes routed on the PCB?

Regards,
Bjorn

> 
> Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
> ---
> Changes in v2:
> - Split single patch into 3 patches.
> - Move mode-switch and data-lanes to kodiak.dtsi instead of board
>   file (Neil Armstrong, Konrad Dybcio)
> - Remove redundant board-level endpoint and orientation-switch
>   overrides now covered by kodiak.dtsi
> - v1 received a Reviewed-by from Dmitry on the combined change;
>   that tag has been dropped pending re-review of the split.
> 
> ---
> Mahadevan P (3):
>       arm64: dts: qcom: kodiak: allow mode-switch events to reach the QMP Combo PHY
>       arm64: dts: qcom: kodiak: move dp data-lanes to SoC dtsi
>       arm64: dts: qcom: kodiak: Set up 4-lane DP
> 
>  arch/arm64/boot/dts/qcom/kodiak.dtsi                          |  2 ++
>  arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts            |  4 ----
>  arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts         |  4 ----
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts                  | 11 -----------
>  arch/arm64/boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts |  1 -
>  arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts     |  3 ---
>  arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi                |  1 -
>  7 files changed, 2 insertions(+), 24 deletions(-)
> ---
> base-commit: 452c3b1ea875276105ac90ba474f72b4cd9b77a2
> change-id: 20260420-kodiak_v2-d7a06d50db5e
> 
> Best regards,
> -- 
> Mahadevan P <mahadevan.p@oss.qualcomm.com>
> 

      parent reply	other threads:[~2026-05-22  3:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-29  6:40 [PATCH v2 0/3] arm64: dts: qcom: kodiak: Enable 4-lane DP via QMP Combo PHY Mahadevan P
2026-04-29  6:40 ` [PATCH v2 1/3] arm64: dts: qcom: kodiak: allow mode-switch events to reach the " Mahadevan P
2026-05-15 10:57   ` Konrad Dybcio
2026-04-29  6:40 ` [PATCH v2 2/3] arm64: dts: qcom: kodiak: move dp data-lanes to SoC dtsi Mahadevan P
2026-04-29  6:40 ` [PATCH v2 3/3] arm64: dts: qcom: kodiak: Set up 4-lane DP Mahadevan P
2026-05-22  3:41 ` Bjorn Andersson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ag_QL5DIo7MxsdYU@baldur \
    --to=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=cros-qcom-dts-watchers@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mahadevan.p@oss.qualcomm.com \
    --cc=mahap@qti.qualcomm.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox