Re: [PATCH RFC 4/9] net: stmmac: qcom-ethqos: add per-platform NOC clock voting

[Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>]

Hi Konrad,
On Mon, Jun 15, 2026 at 02:13:05PM +0200, Konrad Dybcio wrote:
> On 6/11/26 8:37 PM, Mohd Ayaan Anwar wrote:
> > Some SoCs gate the EMAC's path to the System NOC behind dedicated clocks
> > that must be enabled before the DMA can reach memory.  Add
> > ethqos_noc_clk_cfg and the corresponding fields in the driver-data and
> > runtime structs so each compatible can declare its own set with per-clock
> > rates.  The clocks are acquired during probe and enabled/disabled
> > alongside the existing link clock in ethqos_clks_config().
> 
> Sounds like we should use an OPP table instead, we can't just do 
> set_rate() on qcom, as that will not propagate the required perf
> state to the clock controller's supplier power domain (i.e. VDDCX)
> 

Understood, I will test this out for v2.

	Ayaan