From: Vic B <linux@vicb.net>
To: linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>,
Jensen Huang <jensenhuang@friendlyarm.com>
Subject: [PATCH] arm64: dts: rockchip: fix label of sys_led for nanopi-r4s
Date: Sun, 19 Jul 2026 18:05:43 +0200 [thread overview]
Message-ID: <alz112qGhm77liqi@vicb.net> (raw)
The sys_led of NanoPi R4S is labeled as SYS on the board and on the
original case, and it is green, not red.
The board also has a red power led, but that one is connected to 3V3
and cannot be controled via GPIO.
The above can checked on page 17 of board's schematics at
https://wiki.friendlyelec.com/wiki/images/0/06/NanoPi-R4S-1GB-2008-Schematic.pdf
This patch changes the label for sys_led from red:power to green:sys.
Signed-off-by: Vic B <linux@vicb.net>
---
arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
index 4274d1b6e80a..6fbc76e2e679 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
@@ -31,7 +31,7 @@ lan_led: led-lan {
sys_led: led-sys {
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- label = "red:power";
+ label = "green:sys";
default-state = "on";
};
--
2.47.3
next reply other threads:[~2026-07-19 16:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-19 16:05 Vic B [this message]
2026-07-19 16:19 ` [PATCH] arm64: dts: rockchip: fix label of sys_led for nanopi-r4s sashiko-bot
2026-07-19 18:49 ` [PATCH v2] " Vic B
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alz112qGhm77liqi@vicb.net \
--to=linux@vicb.net \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jensenhuang@friendlyarm.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox