Re: [PATCH net-next v3 2/3] dt-bindings: net: wiznet,w5100: add link-gpios

["Arthur Crépin Leblond" <arthur@marmottus.net>]

On Mon, Aug 10, 2026 at 10:31:50AM +0200, Krzysztof Kozlowski wrote:
>On 10/08/2026 10:25, Arnd Bergmann wrote:
>> On Mon, Aug 10, 2026, at 10:21, Krzysztof Kozlowski wrote:
>>> On 10/08/2026 10:12, Arthur Crépin Leblond wrote:
>>>>
>>>> We use this line to detect a link change but don't read its value in
>>>> the interrupt handler, we read the i2c PHYCFGR register to get the
>>>> link status.
>>>
>>> I know, but won't you have soon the same problem with active? Otherwise
>>> are you going to keep polling for the active link, since it is not
>>> reported through the main interrupt?
>>
>> I don't see how we'd ever want to report 'active' state back to
>> the kernel, this just means it's either receiving or transmitting,
>> and the kernel already knows when a data transfer happened
>> because it either started sending or it receives an interrupt for
>> a received frame.
>
>True, that was just an example so the author thinks about it instead of
>just solving one problem now. For example neither speed nor duplex are
>reported in the main interrupt and you might need to configure something
>if they change.
>
>Best regards,
>Krzysztof

I did not want to modify the driver too much and the link status is
enough for me.

Arthur