[PATCH v2 0/5] leds: Add shutdown gpio for is31fl32xx

[PATCH v2 0/5] leds: Add shutdown gpio for is31fl32xx

[Jun Yan]

This patch series primarily adds the shutdown-gpios support                                                                                                                                                                                                                  for the IS31FL32xx controller.It also includes a fix and                                                                                                                                                                                                                     dt-bindings updates derived from previous attempts [1].                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   Patch 1 and patch 2 are based on a previous attempt [1].                                                                                                                                                                                                                     The driver-related updates in patch 2 have already been merged.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           Patch 3 and Patch 4 add support for the shutdown-gpios property,                                                                                                                                                                                                             which corresponds to the SDB pin of the IS31FL32xx series chips.                                                                                                                                                                                                             This pin is used to enter and exit the hardware shutdown mode.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            Patch 5 fixes errors introduced by previous changes. It impacts                                                                                                                                                                                                              the brightness control function of the IS31FL3236.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        [1] https://lore.kernel.org/linux-leds/20250723-leds-is31fl3236a-v6-0-210328058625@thegoodpenguin.co.uk/

Changes in v2:
- Fix $id mismatch with file name in dt-binding.
- Link to v1: https://lore.kernel.org/linux-leds/20260428003412.322032-1-jerrysteve1101@gmail.com/

Jun Yan (5):
  dt-bindings: leds: is31fl32xx: convert the binding to yaml
  dt-bindings: leds: leds-is31fl32xx: add support for is31fl3236a
  dt-bindings: leds: leds-is31fl32xx: Add shutdown-gpios property
  leds: is31fl32xx: Add shutdown pin to exit hardware shutdown mode
  leds: is31f132xx: Fix missing brightness_steps for is31f13236

 .../bindings/leds/issl,is31fl32xx.yaml        | 200 ++++++++++++++++++
 .../bindings/leds/leds-is31fl32xx.txt         |  53 -----
 drivers/leds/leds-is31fl32xx.c                |   7 +
 3 files changed, 207 insertions(+), 53 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt

-- 
2.53.0

[PATCH v2 1/5] dt-bindings: leds: is31fl32xx: convert the binding to yaml

[Jun Yan]

Convert leds-is31fl32xx to DT schema format.

Co-developed-by: Lucca Fachinetti <luccafachinetti@gmail.com>
Signed-off-by: Lucca Fachinetti <luccafachinetti@gmail.com>
Co-developed-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
---
 .../bindings/leds/issl,is31fl32xx.yaml        | 163 ++++++++++++++++++
 .../bindings/leds/leds-is31fl32xx.txt         |  53 ------
 2 files changed, 163 insertions(+), 53 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt

diff --git a/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
new file mode 100644
index 000000000000..cb4741dee12e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/issl,is31fl32xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IS31FL32xx and Si-En SN32xx LED controller
+
+maintainers:
+  - Lucca Fachinetti <luccafachinetti@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+  - Jun Yan <jerrysteve1101@gmail.com>
+
+description: |
+  The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple
+  constant-current channels, each with independent 256-level PWM control.
+  Each LED is represented as a sub-node of the device.
+
+  For more product information please see the links below:
+    https://www.lumissil.com/assets/pdf/core/IS31FL3216_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3218_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3235_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3236_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3293_DS.pdf
+
+properties:
+  compatible:
+    enum:
+      - issi,is31fl3216
+      - issi,is31fl3218
+      - issi,is31fl3235
+      - issi,is31fl3236
+      - issi,is31fl3293
+      - si-en,sn3216
+      - si-en,sn3218
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@([1-9])+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          LED channel number (1..N)
+        minimum: 1
+        maximum: 36
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3293
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3216
+              - si-en,sn3216
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 16
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3218
+              - si-en,sn3218
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 18
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3235
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 28
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3236
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 36
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@3c {
+            compatible = "issi,is31fl3236";
+            reg = <0x3c>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@1 {
+                reg = <1>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_STATUS;
+            };
+
+            led@5 {
+                reg = <5>;
+                color = <LED_COLOR_ID_GREEN>;
+                function = LED_FUNCTION_POWER;
+                linux,default-trigger = "default-on";
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
deleted file mode 100644
index 7082ed186dd9..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Binding for ISSI IS31FL32xx and Si-En SN32xx LED Drivers
-
-The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple
-constant-current channels, each with independent 256-level PWM control.
-Each LED is represented as a sub-node of the device.
-
-Required properties:
-- compatible: one of
-	issi,is31fl3236
-	issi,is31fl3235
-	issi,is31fl3218
-	issi,is31fl3216
-	issi,is31fl3293
-	si-en,sn3218
-	si-en,sn3216
-- reg: I2C slave address
-- address-cells : must be 1
-- size-cells : must be 0
-
-LED sub-node properties:
-- reg : LED channel number (1..N)
-- label :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-
-
-Example:
-
-is31fl3236: led-controller@3c {
-	compatible = "issi,is31fl3236";
-	reg = <0x3c>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	led@1 {
-		reg = <1>;
-		label = "EB:blue:usr0";
-	};
-	led@2 {
-		reg = <2>;
-		label = "EB:blue:usr1";
-	};
-	...
-	led@36 {
-		reg = <36>;
-		label = "EB:blue:usr35";
-	};
-};
-
-For more product information please see the links below:
-http://www.issi.com/US/product-analog-fxled-driver.shtml
-http://www.si-en.com/product.asp?parentid=890
-- 
2.53.0

[PATCH v2 2/5] dt-bindings: leds: leds-is31fl32xx: add support for is31fl3236a

[Jun Yan]

Add an additional and optional control property for setting
the output PWM frequency to 22kHz that exists on is31fl3236a.
The default is 3kHz and this option puts the operational frequency
outside of the audible range.

Co-developed-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
---
 .../bindings/leds/issl,is31fl32xx.yaml        | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
index cb4741dee12e..25ce67940c88 100644
--- a/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
+++ b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
@@ -21,6 +21,7 @@ description: |
     https://www.lumissil.com/assets/pdf/core/IS31FL3218_DS.pdf
     https://www.lumissil.com/assets/pdf/core/IS31FL3235_DS.pdf
     https://www.lumissil.com/assets/pdf/core/IS31FL3236_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3236A_DS.pdf
     https://www.lumissil.com/assets/pdf/core/IS31FL3293_DS.pdf
 
 properties:
@@ -30,6 +31,7 @@ properties:
       - issi,is31fl3218
       - issi,is31fl3235
       - issi,is31fl3236
+      - issi,is31fl3236a
       - issi,is31fl3293
       - si-en,sn3216
       - si-en,sn3218
@@ -37,6 +39,12 @@ properties:
   reg:
     maxItems: 1
 
+  issi,22khz-pwm:
+    type: boolean
+    description:
+      When present, the chip's PWM will operate at ~22kHz as opposed
+      to ~3kHz to move the operating frequency out of the audible range.
+
   "#address-cells":
     const: 1
 
@@ -60,6 +68,22 @@ patternProperties:
       - reg
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3216
+              - issi,is31fl3218
+              - issi,is31fl3235
+              - issi,is31fl3236
+              - issi,is31fl3293
+              - si-en,sn3216
+              - si-en,sn3218
+    then:
+      properties:
+        issi,22khz-pwm: false
+
   - if:
       properties:
         compatible:
@@ -116,6 +140,7 @@ allOf:
           contains:
             enum:
               - issi,is31fl3236
+              - issi,is31fl3236a
     then:
       patternProperties:
         "^led@([1-9])+$":
-- 
2.53.0

[PATCH v2 3/5] dt-bindings: leds: leds-is31fl32xx: Add shutdown-gpios property

[Jun Yan]

The IS31FL32XX series features an SDB shutdown pin.
Driving it low (active low) places the chip into hardware shutdown mode
for power saving, while all register contents are preserved
and registers are not reset.

Add shutdown-gpios property to describe the GPIO connected to the
SDB pin of IS31FL32XX series LED controllers.

Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
---
 .../devicetree/bindings/leds/issl,is31fl32xx.yaml    | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
index 25ce67940c88..4654aa07dc63 100644
--- a/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
+++ b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
@@ -45,6 +45,15 @@ properties:
       When present, the chip's PWM will operate at ~22kHz as opposed
       to ~3kHz to move the operating frequency out of the audible range.
 
+  shutdown-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the chip's SDB pin.
+      Driving this GPIO low places the chip into hardware shutdown mode
+      for power saving. All register contents are preserved and registers
+      are not reset during shutdown. The chip exits hardware shutdown mode
+      when the SDB pin is pulled high.
+
   "#address-cells":
     const: 1
 
@@ -158,6 +167,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/leds/common.h>
 
     i2c {
@@ -170,6 +180,8 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
+            shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+
             led@1 {
                 reg = <1>;
                 color = <LED_COLOR_ID_RED>;
-- 
2.53.0

[PATCH v2 4/5] leds: is31fl32xx: Add shutdown pin to exit hardware shutdown mode

[Jun Yan]

The IS31FL32XX series features an SDB shutdown pin.
Driving it low (active low) places the chip into hardware shutdown mode
for power saving, while all register contents are preserved
and registers are not reset.

Drive the pin logic low during probe() to exit hardware
shutdown mode.

Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
---
 drivers/leds/leds-is31fl32xx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
index fe07acbb103a..d2be996dd4ea 100644
--- a/drivers/leds/leds-is31fl32xx.c
+++ b/drivers/leds/leds-is31fl32xx.c
@@ -60,6 +60,7 @@ struct is31fl32xx_led_data {
 struct is31fl32xx_priv {
 	const struct is31fl32xx_chipdef *cdef;
 	struct i2c_client *client;
+	struct gpio_desc *shutdown_gpio;
 	unsigned int num_leds;
 	struct is31fl32xx_led_data leds[];
 };
@@ -421,6 +422,11 @@ static int is31fl32xx_parse_dt(struct device *dev,
 	const struct is31fl32xx_chipdef *cdef = priv->cdef;
 	int ret = 0;
 
+	priv->shutdown_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->shutdown_gpio))
+		return dev_err_probe(dev, PTR_ERR(priv->shutdown_gpio),
+				"Failed to get shutdown gpio\n");
+
 	if ((cdef->output_frequency_setting_reg != IS31FL32XX_REG_NONE) &&
 	    of_property_read_bool(dev_of_node(dev), "issi,22khz-pwm")) {
 
-- 
2.53.0

[PATCH v2 5/5] leds: is31f132xx: Fix missing brightness_steps for is31f13236

[Jun Yan]

Add missing brightness_steps for is31fl3236 to fix brightness control.

Fixes: a18983b95a61 ("leds: is31f132xx: Add support for is31fl3293")
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
---
 drivers/leds/leds-is31fl32xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
index d2be996dd4ea..5db7d91c6a34 100644
--- a/drivers/leds/leds-is31fl32xx.c
+++ b/drivers/leds/leds-is31fl32xx.c
@@ -487,6 +487,7 @@ static const struct is31fl32xx_chipdef is31fl3236_cdef = {
 	.pwm_register_base			= 0x01,
 	.led_control_register_base		= 0x26,
 	.enable_bits_per_led_control_register	= 1,
+	.brightness_steps			= 256,
 };
 
 static const struct is31fl32xx_chipdef is31fl3236a_cdef = {
-- 
2.53.0

Re: [PATCH v2 3/5] dt-bindings: leds: leds-is31fl32xx: Add shutdown-gpios property

[Krzysztof Kozlowski]

On 28/04/2026 04:33, Jun Yan wrote:
> The IS31FL32XX series features an SDB shutdown pin.
> Driving it low (active low) places the chip into hardware shutdown mode
> for power saving, while all register contents are preserved
> and registers are not reset.
> 
> Add shutdown-gpios property to describe the GPIO connected to the
> SDB pin of IS31FL32XX series LED controllers.
> 
> Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
> ---
>  .../devicetree/bindings/leds/issl,is31fl32xx.yaml    | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
> index 25ce67940c88..4654aa07dc63 100644
> --- a/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
> +++ b/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
> @@ -45,6 +45,15 @@ properties:
>        When present, the chip's PWM will operate at ~22kHz as opposed
>        to ~3kHz to move the operating frequency out of the audible range.
>  
> +  shutdown-gpios:

powerdown-gpios (see gpio-consumer-common)

> +    maxItems: 1



Best regards,
Krzysztof