* Re: Solution for rk3588 with suspending and wakeuping at Radxa rock5b+ through original power button.
[not found] <3369e728-9af2-43a8-a25f-ff107ceb34de@gmail.com>
@ 2026-11-22 9:29 ` Attila Tóth
2026-11-22 10:16 ` Attila Tóth
1 sibling, 0 replies; 2+ messages in thread
From: Attila Tóth @ 2026-11-22 9:29 UTC (permalink / raw)
To: devicetree
Also with this dtb is going playing again of mpeg2 from dvd at kernel
7.3 good as at kernel 6.18 era.
Dňa 22. 11. 2026 o 9:37 Attila Tóth napísal(a):
>
> It is going at Linux batocera 44 with mainline *kernel 7.2.8. (*There
> is also not going lan wakeup, isb wakeup, wakeup through hdmi*),* DTB
> is in attachment of this email
>
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Solution for rk3588 with suspending and wakeuping at Radxa rock5b+ through original power button.
[not found] <3369e728-9af2-43a8-a25f-ff107ceb34de@gmail.com>
2026-11-22 9:29 ` Solution for rk3588 with suspending and wakeuping at Radxa rock5b+ through original power button Attila Tóth
@ 2026-11-22 10:16 ` Attila Tóth
1 sibling, 0 replies; 2+ messages in thread
From: Attila Tóth @ 2026-11-22 10:16 UTC (permalink / raw)
To: devicetree
[-- Attachment #1: Type: text/plain, Size: 446 bytes --]
Sorry, it was not thruth. Batocera is faking by uspend and wakeup.
According to ttl was clear start and shutdown. But have their dtb lower
frequencies of cpu and have support of mpeg2 of dvd under kernel 7.x
Dňa 22. 11. 2026 o 9:37 Attila Tóth napísal(a):
>
> It is going at Linux batocera 44 with mainline *kernel 7.2.8. (*There
> is also not going lan wakeup, isb wakeup, wakeup through hdmi*),* DTB
> is in attachment of this email
>
[-- Attachment #2: start Bratocera with new dtb at kernel 7.2.8.txt --]
[-- Type: text/plain, Size: 10144 bytes --]
picocom v3.1
port is : /dev/ttyACM0
flowcontrol : none
baudrate is : 1500000
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
hangup is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
logfile is : none
initstring : none
exit_after is : not set
exit is : no
Type [C-a] [C-h] to see available commands
Terminal ready
DDR b8ce94f14b cym 25/09/26-15:48.05,fwver: v1.20
ch0 ttot6
ch1 ttot6
ch2 ttot6
ch3 ttot6
ch0 ttot7
LPDDR5, 2400MHz
channel[0] BW=16 Col=10 Bk=16 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
ch1 ttot7
channel[1] BW=16 Col=10 Bk=16 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
ch2 ttot7
channel[2] BW=16 Col=10 Bk=16 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
ch3 ttot7
channel[3] BW=16 Col=10 Bk=16 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x6
DQS rds:l0,h2
CH0 RX Vref:27.5%, TX Vref:22.0%,22.0%
DQ rds:h1 l0 h5 l0 l0 h1 h1 h1, h1 l0 h4 h1 h1 h6 h1 l0
DQS rds:l0,h1
CH1 RX Vref:27.1%, TX Vref:25.0%,23.0%
DQ rds:h2 h1 h2 h1 h2 h5 h4 l0, h1 h1 h1 l1 l2 l0 h1 h6
DQS rds:l0,h1
CH2 RX Vref:27.1%, TX Vref:23.0%,23.0%
DQ rds:h2 h3 h1 h4 l0 h2 h5 h2, h1 h5 l0 h1 h1 h2 h1 l0
DQS rds:h1,l0
CH3 RX Vref:30.5%, TX Vref:22.0%,21.0%
DQ rds:l0 h2 l0 h3 h5 h1 l0 h1, h3 h1 h1 l0 h1 h1 l1 h4
stride=0x2, ddr_config=0x6
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0x0 0x2400 0x44800 0x89000, rank_mask0 0x2000
change to F1: 534MHz
ch0 ttot6
ch1 ttot6
ch2 ttot6
ch3 ttot6
change to F2: 1320MHz
ch0 ttot8
ch1 ttot8
ch2 ttot8
ch3 ttot8
change to F3: 1968MHz
ch0 ttot6
ch1 ttot6
ch2 ttot6
ch3 ttot6
change to F0: 2400MHz
ch0 ttot7
ch1 ttot7
ch2 ttot7
ch3 ttot7
out
U-Boot SPL 2026.04_armbian-2026.04-S88dc-Pe2da-He85d-V1113-Be4e9-R448a (May 07 2026 - 18:21:41 +0000)
Trying to boot from SPI
## Checking hash(es) for config config-2 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-2 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
NOTICE: BL31: v2.13.0(release):armbian
NOTICE: BL31: Built : 04:51:51, Apr 30 2026
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: Maximum SPI INTID supported: 511
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x800000
INFO: SPSR = 0x3c9
U-Boot 2026.04_armbian-2026.04-S88dc-Pe2da-He85d-V1113-Be4e9-R448a (May 07 2026 - 18:21:41 +0000)
Model: Radxa ROCK 5B+
SoC: RK3588
DRAM: 8 GiB
Core: 820 devices, 34 uclasses, devicetree: separate
MMC: mmc@fe2c0000: 1, mmc@fe2e0000: 0
Loading Environment from SPIFlash... SF: Detected xt25f128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
In: serial@feb50000
Out: serial@feb50000
Err: serial@feb50000
Model: Radxa ROCK 5B+
SoC: RK3588
Net: No ethernet found.
Hit any key to stop autoboot: 0
Scanning for bootflows in all bootdevs
Seq Method State Uclass Part Name Filename
--- ----------- ------ -------- ---- ------------------------ ----------------
Scanning global bootmeth 'efi_mgr':
Card did not respond to voltage select! : -110
Cannot persist EFI variables without system partition
0 efi_mgr ready (none) 0 <NULL>
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 1' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
Scanning bootdev 'mmc@fe2c0000.bootdev':
1 extlinux ready mmc 1 mmc@fe2c0000.bootdev.part /extlinux/extlinux.conf
** Booting bootflow 'mmc@fe2c0000.bootdev.part_1' with extlinux
1: batocera.linux
Retrieving file: /boot/linux
Retrieving file: /boot/initrd.lz4
append: initrd=/boot/initrd.lz4 label=BATOCERA rootwait quiet loglevel=0 console=ttyS2,1500000n8 coherent_pool=2M
Retrieving file: /boot/rk3588-rock-5b-plus.dtb
## Flattened Device Tree blob at 12000000
Booting using the fdt blob at 0x12000000
Working FDT set to 12000000
Loading Ramdisk to ecaa6000, end ecba2b3f ... OK
Loading Device Tree to 00000000eca73000, end 00000000ecaa5ff1 ... OK
Working FDT set to eca73000
[image_setup_libfdt] called
[image_setup_libfdt] calling fdt_fixup_ethernet
[fdt_fixup_ethernet] called
[fdt_fixup_ethernet] alias #0: name='gpio0', path='/pinctrl/gpio@fd8a0000'
[fdt_fixup_ethernet] alias #1: name='gpio1', path='/pinctrl/gpio@fec20000'
[fdt_fixup_ethernet] alias #2: name='gpio2', path='/pinctrl/gpio@fec30000'
[fdt_fixup_ethernet] alias #3: name='gpio3', path='/pinctrl/gpio@fec40000'
[fdt_fixup_ethernet] alias #4: name='gpio4', path='/pinctrl/gpio@fec50000'
[fdt_fixup_ethernet] alias #5: name='i2c0', path='/i2c@fd880000'
[fdt_fixup_ethernet] alias #6: name='i2c1', path='/i2c@fea90000'
[fdt_fixup_ethernet] alias #7: name='i2c2', path='/i2c@feaa0000'
[fdt_fixup_ethernet] alias #8: name='i2c3', path='/i2c@feab0000'
[fdt_fixup_ethernet] alias #9: name='i2c4', path='/i2c@feac0000'
[fdt_fixup_ethernet] alias #10: name='i2c5', path='/i2c@fead0000'
[fdt_fixup_ethernet] alias #11: name='i2c6', path='/i2c@fec80000'
[fdt_fixup_ethernet] alias #12: name='i2c7', path='/i2c@fec90000'
[fdt_fixup_ethernet] alias #13: name='i2c8', path='/i2c@feca0000'
[fdt_fixup_ethernet] alias #14: name='serial0', path='/serial@fd890000'
[fdt_fixup_ethernet] alias #15: name='serial1', path='/serial@feb40000'
[fdt_fixup_ethernet] alias #16: name='serial2', path='/serial@feb50000'
[fdt_fixup_ethernet] alias #17: name='serial3', path='/serial@feb60000'
[fdt_fixup_ethernet] alias #18: name='serial4', path='/serial@feb70000'
[fdt_fixup_ethernet] alias #19: name='serial5', path='/serial@feb80000'
[fdt_fixup_ethernet] alias #20: name='serial6', path='/serial@feb90000'
[fdt_fixup_ethernet] alias #21: name='serial7', path='/serial@feba0000'
[fdt_fixup_ethernet] alias #22: name='serial8', path='/serial@febb0000'
[fdt_fixup_ethernet] alias #23: name='serial9', path='/serial@febc0000'
[fdt_fixup_ethernet] alias #24: name='spi0', path='/spi@feb00000'
[fdt_fixup_ethernet] alias #25: name='spi1', path='/spi@feb10000'
[fdt_fixup_ethernet] alias #26: name='spi2', path='/spi@feb20000'
[fdt_fixup_ethernet] alias #27: name='spi3', path='/spi@feb30000'
[fdt_fixup_ethernet] alias #28: name='spi4', path='/spi@fecb0000'
[fdt_fixup_ethernet] alias #29: name='mmc0', path='/mmc@fe2e0000'
[fdt_fixup_ethernet] alias #30: name='mmc1', path='/mmc@fe2c0000'
[fdt_fixup_ethernet] alias #31: name='mmc2', path='/mmc@fe2d0000'
[fdt_fixup_ethernet] SUMMARY: aliases found=32, attempted=0, skipped=0, patched=0
[image_setup_libfdt] calling ft_board_setup
Starting kernel ...
Mounted LABEL=BATOCERA as /boot_root
INIT: version 3.14 booting
INIT: No inittab.d directory found
Tue Jan 1 01:00:00 CET 1980
Starting system dbus-daemon: Could not create /var/lib/dbus/machine-id.s7cHZDqN: No such file or directory
dbus[203]: Unknown username "pulse" in message bus configuration file
OK
Starting syslog-ng: OK
Running sysctl: OK
Restoring random seed: done.
Saving random seed: done.
Starting udevd: OK
[S06audio] Starting audio service sequence...
[S06audio] PipeWire daemon backgrounded (PID 532)
[S06audio] Status [0/50]: Waiting for pipewire-0 socket...
[S06audio] Hardware cards discovered: alsa_card._sys_devices_platform_analog-sound_sound_card4 alsa_card.usb-SAVIAUDIO_LJMAUDIO_SA9227-01 alsa_card.usb-XING_WEI_2.4G_USB_USB_Composite_Device-00 alsa_card._sys_devices_platform_hdmi0-sound_sound_card2 alsa_card._sys_devices_platform_hdmi1-sound_sound_card3
OK
Starting fan daemon: OK
Starting network: OK
Starting connman: Disable wifi
done.
Setting GPU to performance mode...
cat: /proc/device-tree/wireless-bluetooth/status: No such file or directory
cat: /proc/device-tree/wireless-wlan/wifi_chip_type: No such file or directory
Starting share: No devices found
done.
done.
Starting binfmt_misc setup: OK
Starting lircd: OK
Starting system: dos2unix: converting file /userdata/system/batocera.conf to Unix format...
done.
[S27audioconfig] Targeting Device: auto
[S27audioconfig] Current available sinks: alsa_output.usb-SAVIAUDIO_LJMAUDIO_SA9227-01.analog-stereo alsa_output._sys_devices_platform_hdmi0-sound_sound_card2.stereo-fallback
[S27audioconfig] Applying volume: 100
OK
Starting splash-mpv: Video: /usr/share/batocera/splash/splash.mp4: OK
Bluetooth adapter name has been set to: Radxa_ROCK_5B_
Checking for SDIO bluetooth support
Starting hotkeygen: OK
Starting rpcbind: OK
start-stop-daemon: warning: failed to kill 1491: No such process
Starting rngd: OK
/etc/iptables.conf does not exist, nothing to do.
Starting securepasswd: done.
Starting fake hwclock: loading system time.
Current system time: 2026-11-22 10:01:24
fake-hwclock saved clock information is in the past: 2026-11-22 10:00:19
To set system time to this saved clock anyway, use "force"
Starting ntpd: OK
Starting dropbear sshd: OK
Starting thd: OK
Starting NFS statd: OK
Starting NFS services: OK
Starting NFS daemon: OK
Starting NFS mountd: OK
Starting batocera-battery-checker: OK
Starting SMB services: done
Starting NMB services: done
Starting wsdd: wsdd
done
Starting joycond...
joycond started.
find: '/userdata/system/services': No such file or directory
System Service: batocera_torrent -> service is disabled [ok]
System Service: dmd_real -> service is disabled [ok]
System Service: dmd_simulator -> service is disabled [ok]
System Service: es_web_notifier -> service is disabled [ok]
System Service: ledspicer -> service is disabled [ok]
System Service: pigpio -> service is disabled [ok]
System Service: simple_nfc -> service is disabled [ok]
System Service: syncthing -> service is disabled [ok]
System Service: wiimote3rdparty -> service is disabled [ok]
System Service: wireguard -> service is disabled [ok]
System Service: zramswap -> service is disabled [ok]
INIT: Entering runlevel: 3
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-22 10:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <3369e728-9af2-43a8-a25f-ff107ceb34de@gmail.com>
2026-11-22 9:29 ` Solution for rk3588 with suspending and wakeuping at Radxa rock5b+ through original power button Attila Tóth
2026-11-22 10:16 ` Attila Tóth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox