Re: [PATCH] arm64: dts: qcom: sdm845-shift-axolotl: Move address and size cells upwards

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 10/20/25 9:55 AM, Guido Günther wrote:
> They're used in the parent to describe the panel's reg property.
> 
> Fixes the
> 
> linux/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dtb: panel@0 (visionox,rm69299-shift): '#address-cells', '#size-cells' do not match any of the regexes: '^pinctrl-[0-9]+$'
> 
> warning.
> 
> Signed-off-by: Guido Günther <agx@sigxcpu.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> index 89260fce6513..44e7b5015d26 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
> @@ -472,6 +472,9 @@ &mdss_dsi0 {
>  	status = "okay";
>  	vdda-supply = <&vdda_mipi_dsi0_1p2>;
>  
> +	#address-cells = <1>;
> +	#size-cells = <0>;

These are already defined in sdm845. you can simply delete the lines
below

Konrad

> +
>  	panel@0 {
>  		compatible = "visionox,rm69299-shift";
>  		status = "okay";
> @@ -479,9 +482,6 @@ panel@0 {
>  		vdda-supply = <&vreg_l14a_1p88>;
>  		vdd3p3-supply = <&vreg_l28a_3p0>;
>  
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
>  		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
>  
>  		pinctrl-names = "default", "sleep";
> 
> ---
> base-commit: f406055cb18c6e299c4a783fc1effeb16be41803
> change-id: 20251019-shift6mq-dt-e4b9e7dc7169
> 
> Best regards,