* [PATCH v3 1/3] dt-bindings: arm: qcom: Document OnePlus 8T
2026-10-17 15:12 [PATCH v3 0/3] Add OnePlus 8T Frieder Hannenheim
@ 2026-10-17 15:12 ` Frieder Hannenheim
2026-10-17 17:34 ` Krzysztof Kozlowski
2026-10-17 15:12 ` [PATCH v3 2/3] arm64: dts: qcom: Add sm8250-oneplus-common.dtsi Frieder Hannenheim
2026-10-17 15:12 ` [PATCH v3 3/3] arm64: dts: qcom: oneplus-kebab: new device Frieder Hannenheim
2 siblings, 1 reply; 7+ messages in thread
From: Frieder Hannenheim @ 2026-10-17 15:12 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Robert Oscilowski, Jean-François Bobier, phone-devel,
linux-arm-msm, devicetree, linux-kernel, Frieder Hannenheim
Add compatible for OnePlus 8T
Signed-off-by: Frieder Hannenheim <git@fhannenheim.net>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 50cc18a6ec5e..6e3fdce92798 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1070,6 +1070,7 @@ properties:
- qcom,qrb5165-rb5
- qcom,sm8250-hdk
- qcom,sm8250-mtp
+ - oneplus,kebab
- samsung,r8q
- samsung,x1q
- sony,pdx203-generic
--
2.54.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v3 1/3] dt-bindings: arm: qcom: Document OnePlus 8T
2026-10-17 15:12 ` [PATCH v3 1/3] dt-bindings: arm: qcom: Document " Frieder Hannenheim
@ 2026-10-17 17:34 ` Krzysztof Kozlowski
2026-10-17 18:16 ` Frieder Hannenheim
0 siblings, 1 reply; 7+ messages in thread
From: Krzysztof Kozlowski @ 2026-10-17 17:34 UTC (permalink / raw)
To: Frieder Hannenheim, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: Robert Oscilowski, Jean-François Bobier, phone-devel,
linux-arm-msm, devicetree, linux-kernel
On 17/10/2026 17:12, Frieder Hannenheim wrote:
> Add compatible for OnePlus 8T
>
> Signed-off-by: Frieder Hannenheim <git@fhannenheim.net>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 50cc18a6ec5e..6e3fdce92798 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -1070,6 +1070,7 @@ properties:
> - qcom,qrb5165-rb5
> - qcom,sm8250-hdk
> - qcom,sm8250-mtp
> + - oneplus,kebab
o < q, please don't break existing sorting.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3 1/3] dt-bindings: arm: qcom: Document OnePlus 8T
2026-10-17 17:34 ` Krzysztof Kozlowski
@ 2026-10-17 18:16 ` Frieder Hannenheim
0 siblings, 0 replies; 7+ messages in thread
From: Frieder Hannenheim @ 2026-10-17 18:16 UTC (permalink / raw)
To: Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: Robert Oscilowski, Jean-François Bobier, phone-devel,
linux-arm-msm, devicetree, linux-kernel
On 17.10.26 19:34, Krzysztof Kozlowski wrote:
> On 17/10/2026 17:12, Frieder Hannenheim wrote:
>> Add compatible for OnePlus 8T
>>
>> Signed-off-by: Frieder Hannenheim <git@fhannenheim.net>
>> ---
>> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
>> index 50cc18a6ec5e..6e3fdce92798 100644
>> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
>> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
>> @@ -1070,6 +1070,7 @@ properties:
>> - qcom,qrb5165-rb5
>> - qcom,sm8250-hdk
>> - qcom,sm8250-mtp
>> + - oneplus,kebab
>
>
> o < q, please don't break existing sorting.
>
> Best regards,
> Krzysztof
Right, q such a weird letter to me that my intuition always sorts it
wrong. Will fix. Thank you.
Kind regards,
Frieder
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3 2/3] arm64: dts: qcom: Add sm8250-oneplus-common.dtsi
2026-10-17 15:12 [PATCH v3 0/3] Add OnePlus 8T Frieder Hannenheim
2026-10-17 15:12 ` [PATCH v3 1/3] dt-bindings: arm: qcom: Document " Frieder Hannenheim
@ 2026-10-17 15:12 ` Frieder Hannenheim
2026-10-17 15:26 ` sashiko-bot
2026-10-17 15:12 ` [PATCH v3 3/3] arm64: dts: qcom: oneplus-kebab: new device Frieder Hannenheim
2 siblings, 1 reply; 7+ messages in thread
From: Frieder Hannenheim @ 2026-10-17 15:12 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Robert Oscilowski, Jean-François Bobier, phone-devel,
linux-arm-msm, devicetree, linux-kernel, Frieder Hannenheim
This file contains common properties shared by all OnePlus devices using
the Qualcomm sm8250 chipset.
Signed-off-by: Frieder Hannenheim <git@fhannenheim.net>
Co-developed-by: Robert Oscilowski <drgitx@gmail.com>
Signed-off-by: Robert Oscilowski <drgitx@gmail.com>
---
.../arm64/boot/dts/qcom/sm8250-oneplus-common.dtsi | 607 +++++++++++++++++++++
1 file changed, 607 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-oneplus-common.dtsi
new file mode 100644
index 000000000000..6d7793c792f0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-oneplus-common.dtsi
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &camera_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &cvp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &npu_mem;
+/delete-node/ &removed_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_mem;
+
+/ {
+ chassis-type = "handset";
+ qcom,msm-id = <QCOM_ID_SM8250 0x20001>;
+ qcom,board-id = <QCOM_BOARD_ID_MTP 0x0>;
+
+ aliases {
+ serial0 = &uart12;
+ serial1 = &uart6;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "serial0:115200n8";
+
+ framebuffer: framebuffer-0 {
+ compatible = "simple-framebuffer";
+ memory-region = <&framebuffer_mem>;
+ format = "a8r8g8b8";
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>;
+ power-domains = <&dispcc MDSS_GDSC>;
+ };
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ label = "Volume keys";
+
+ pinctrl-0 = <&vol_down_l &vol_up_n>;
+ pinctrl-names = "default";
+
+ key-vol-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pm8150_gpios 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+
+ key-vol-up {
+ label = "Volume Up";
+ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ reserved-memory {
+ removed_mem: memory@80b00000 {
+ reg = <0x0 0x80b00000 0x0 0xcd00000>;
+ no-map;
+ };
+
+ camera_mem: memory@8dc00000 {
+ reg = <0x0 0x8dc00000 0x0 0x500000>;
+ no-map;
+ };
+
+ wlan_mem: memory@8e100000 {
+ reg = <0x0 0x8e100000 0x0 0x100000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@8e200000 {
+ reg = <0x0 0x8e200000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@8e210000 {
+ reg = <0x0 0x8e210000 0x0 0xa000>;
+ no-map;
+ };
+
+ gpu_mem: memory@8e21a000 {
+ reg = <0x0 0x8e21a000 0x0 0x2000>;
+ no-map;
+ };
+
+ npu_mem: memory@8e300000 {
+ reg = <0x0 0x8e300000 0x0 0x500000>;
+ no-map;
+ };
+
+ video_mem: memory@8e800000 {
+ reg = <0x0 0x8e800000 0x0 0x500000>;
+ no-map;
+ };
+
+ cvp_mem: memory@8ed00000 {
+ reg = <0x0 0x8ed00000 0x0 0x500000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@8f200000 {
+ reg = <0x0 0x8f200000 0x0 0x1400000>;
+ no-map;
+ };
+
+ slpi_mem: memory@90600000 {
+ reg = <0x0 0x90600000 0x0 0x1500000>;
+ no-map;
+ };
+
+ adsp_mem: memory@91b00000 {
+ reg = <0x0 0x91b00000 0x0 0x2500000>;
+ no-map;
+ };
+
+ spss_mem: memory@94000000 {
+ reg = <0x0 0x94000000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap: memory@94100000 {
+ reg = <0x0 0x94100000 0x0 0x4600000>;
+ no-map;
+ };
+
+ framebuffer_mem: memory@9c000000 {
+ reg = <0 0x9c000000 0 0x2300000>;
+ no-map;
+ };
+
+ ramoops: ramoops@b0000000 {
+ compatible = "ramoops";
+ reg = <0x0 0xb0000000 0x0 0x400000>;
+ record-size = <0x40000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x40000>;
+ pmsg-size = <0x200000>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ vreg_s4a_1p8: vreg-s4a-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+
+ vreg_s6c_0p88: smpc6-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s6c_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-always-on;
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+ vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ vreg_s5a_1p9: smps5 {
+ regulator-name = "vreg_s5a_1p9";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6a_0p95: smps6 {
+ regulator-name = "vreg_s6a_0p95";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_3p1: ldo2 {
+ regulator-name = "vreg_l2a_3p1";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p9: ldo3 {
+ regulator-name = "vreg_l3a_0p9";
+ regulator-min-microvolt = <928000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_0p88: ldo5 {
+ regulator-name = "vreg_l5a_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-name = "vreg_l6a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-name = "vreg_l7a_1p8";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l9a_1p2: ldo9 {
+ regulator-name = "vreg_l9a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ regulator-name = "vreg_l10a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_ts_3p0: ldo13 {
+ regulator-name = "vreg_l13a_ts_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-name = "vreg_l14a_1p8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-name = "vreg_l15a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-name = "vreg_l16a_2p7";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-name = "vreg_l17a_3p0";
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_0p92: ldo18 {
+ regulator-name = "vreg_l18a_0p92";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+ vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_s8c_1p3: smps8 {
+ regulator-name = "vreg_s8c_1p3";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p2: ldo2 {
+ regulator-name = "vreg_l2c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p7: ldo4 {
+ regulator-name = "vreg_l4c_1p7";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-name = "vreg_l5c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_cam_vcm0_2p85: ldo7 {
+ regulator-name = "vreg_l7c_cam_vcm0_2p85";
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-name = "vreg_l8c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_3p0: ldo10 {
+ regulator-name = "vreg_l10c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p0: ldo11 {
+ regulator-name = "vreg_l11c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+ };
+
+ vreg_f: regulators-2 {
+ compatible = "qcom,pm8009-1-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-l2-supply = <&vreg_s8c_1p3>;
+ vdd-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-supply = <&vreg_s4a_1p8>;
+
+ vreg_s2f_0p95: smps2 {
+ regulator-name = "vreg_s2f_0p95";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ vreg_l1f_1p1: ldo1 {
+ regulator-name = "vreg_l1f_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p2: ldo2 {
+ regulator-name = "vreg_l2f_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p05: ldo3 {
+ regulator-name = "vreg_l3f_1p05";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4f_1p05: ldo4 {
+ regulator-name = "vreg_l4f_1p05";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5f_2p8: ldo5 {
+ regulator-name = "vreg_l5f_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6f_2p8: ldo6 {
+ regulator-name = "vreg_l6f_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7f_1p8: ldo7 {
+ regulator-name = "vreg_l7f_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&pm8150_gpios {
+ vol_up_n: vol-up-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ vol_down_l: vol-down-l-state {
+ pins = "gpio7";
+ function = "normal";
+ power-source = <1>;
+ input-enable;
+ bias-pull-up;
+ };
+};
+
+&pon {
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qup_spi4_cs_gpio {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&qup_spi4_data_clk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <28 4>, /* SPI (NFC) */
+ <40 4>; /* SPI (fingerprint scanner) */
+};
+
+&uart12 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l17a_3p0>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l6a_1p2>;
+ vccq-max-microamp = <800000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <800000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+
+ status = "okay";
+};
+
--
2.54.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v3 2/3] arm64: dts: qcom: Add sm8250-oneplus-common.dtsi
2026-10-17 15:12 ` [PATCH v3 2/3] arm64: dts: qcom: Add sm8250-oneplus-common.dtsi Frieder Hannenheim
@ 2026-10-17 15:26 ` sashiko-bot
0 siblings, 0 replies; 7+ messages in thread
From: sashiko-bot @ 2026-10-17 15:26 UTC (permalink / raw)
To: Frieder Hannenheim; +Cc: devicetree, robh, conor+dt
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] arm64: dts: qcom: duplicate KEY_VOLUMEDOWN on gpio-keys and pon_resin
--
commit 7ef24e1b9b48012e8e7fa23614b055d4480b386c
Author: Frieder Hannenheim <git@fhannenheim.net>
arm64: dts: qcom: Add sm8250-oneplus-common.dtsi
This commit adds a common device tree include file for OnePlus devices
based on the Qualcomm SM8250 SoC, defining shared reserved memory
regions, regulators, PMIC GPIOs, PON keys, and UFS configuration.
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-oneplus-common.dtsi
> new file mode 100644
> index 0000000000000..6d7793c792f05
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8250-oneplus-common.dtsi
> @@ -0,0 +1,607 @@
[ ... ]
> + gpio_keys: gpio-keys {
> + compatible = "gpio-keys";
> + label = "Volume keys";
> +
> + pinctrl-0 = <&vol_down_l &vol_up_n>;
> + pinctrl-names = "default";
> +
> + key-vol-down {
> + label = "Volume Down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + gpios = <&pm8150_gpios 7 GPIO_ACTIVE_LOW>;
> + debounce-interval = <15>;
> + linux,can-disable;
> + wakeup-source;
> + };
> +
> + key-vol-up {
> + label = "Volume Up";
> + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + debounce-interval = <15>;
> + linux,can-disable;
> + wakeup-source;
> + };
> + };
[ ... ]
> +&pm8150_gpios {
> + vol_up_n: vol-up-n-state {
> + pins = "gpio6";
> + function = "normal";
> + power-source = <1>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + vol_down_l: vol-down-l-state {
> + pins = "gpio7";
> + function = "normal";
> + power-source = <1>;
> + input-enable;
> + bias-pull-up;
> + };
> +};
> +
> +&pon {
> + mode-bootloader = <0x2>;
> + mode-recovery = <0x1>;
> +};
> +
> +&pon_pwrkey {
> + status = "okay";
> +};
> +
> +&pon_resin {
> + linux,code = <KEY_VOLUMEDOWN>;
> +
> + status = "okay";
> +};
[Severity: Medium]
Should KEY_VOLUMEDOWN be registered in both gpio_keys (via key-vol-down
on pm8150_gpios 7) and pon_resin?
With both nodes enabled, both the gpio-keys driver and the pm8941-pwrkey
driver probe and register active wakeup-capable input devices for
KEY_VOLUMEDOWN. Depending on how the physical button is wired on these
boards, wouldn't this either emit duplicate KEY_VOLUMEDOWN events across
two separate input devices on every button press, or leave one of the two
input drivers monitoring an unconnected or wrong PMIC pin?
[ ... ]
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261017-kebab_dts-v3-0-5fc3ca52a383@fhannenheim.net?part=2
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3 3/3] arm64: dts: qcom: oneplus-kebab: new device
2026-10-17 15:12 [PATCH v3 0/3] Add OnePlus 8T Frieder Hannenheim
2026-10-17 15:12 ` [PATCH v3 1/3] dt-bindings: arm: qcom: Document " Frieder Hannenheim
2026-10-17 15:12 ` [PATCH v3 2/3] arm64: dts: qcom: Add sm8250-oneplus-common.dtsi Frieder Hannenheim
@ 2026-10-17 15:12 ` Frieder Hannenheim
2 siblings, 0 replies; 7+ messages in thread
From: Frieder Hannenheim @ 2026-10-17 15:12 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Robert Oscilowski, Jean-François Bobier, phone-devel,
linux-arm-msm, devicetree, linux-kernel, Frieder Hannenheim
Add initial device-tree for the OnePlus 8T. Downstream reference is [1].
[1] https://github.com/LineageOS/android_kernel_oneplus_sm8250/blob/lineage-23.2/arch/arm64/boot/dts/vendor/oplus/kona-kebab-overlay.dts
Signed-off-by: Frieder Hannenheim <git@fhannenheim.net>
Co-developed-by: Robert Oscilowski <drgitx@gmail.com>
Signed-off-by: Robert Oscilowski <drgitx@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sm8250-oneplus-kebab.dts | 130 ++++++++++++++++++++++
2 files changed, 131 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6f33c4e2f09c..d8292f681e71 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -356,6 +356,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8250-oneplus-kebab.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-samsung-r8q.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-samsung-x1q.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8250-oneplus-kebab.dts b/arch/arm64/boot/dts/qcom/sm8250-oneplus-kebab.dts
new file mode 100644
index 000000000000..1bd3734a74e9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-oneplus-kebab.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "sm8250-oneplus-common.dtsi"
+
+/ {
+ model = "OnePlus 8T";
+ compatible = "oneplus,kebab", "qcom,sm8250";
+};
+
+&battery {
+ charge-full-design-microamp-hours = <4500000>;
+ energy-full-design-microwatt-hours = <19575000>;
+ voltage-max-design-microvolt = <4350000>;
+};
+
+&framebuffer {
+ width = <1080>;
+ height = <2400>;
+ stride = <(1080 * 4)>;
+};
+
+&i2c2 {
+ status = "okay";
+
+ pm8008: pmic@8 {
+ compatible = "qcom,pm8008";
+ reg = <0x8>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <112 IRQ_TYPE_EDGE_RISING>;
+
+ reset-gpios = <&tlmm 93 GPIO_ACTIVE_LOW>;
+
+ vdd-l1-l2-supply = <&vreg_s8c_1p3>;
+ vdd-l3-l4-supply = <&vreg_bob>;
+ vdd-l5-supply = <&vreg_bob>;
+ vdd-l6-supply = <&vreg_bob>;
+ vdd-l7-supply = <&vreg_bob>;
+
+ pinctrl-0 = <&pm8008_default>;
+ pinctrl-names = "default";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8008 0 0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #thermal-sensor-cells = <0>;
+
+ regulators {
+ ldo1 {
+ regulator-name = "vreg_l1p";
+ regulator-min-microvolt = <528000>;
+ regulator-max-microvolt = <1504000>;
+ };
+
+ ldo2 {
+ regulator-name = "vreg_l2p";
+ regulator-min-microvolt = <528000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ ldo3 {
+ regulator-name = "vreg_l3p";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ ldo4 {
+ regulator-name = "vreg_l4p";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5 {
+ regulator-name = "vreg_l5p";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ ldo6 {
+ regulator-name = "vreg_l6p";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ ldo7 {
+ regulator-name = "vreg_l7p";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3400000>;
+ };
+ };
+ };
+};
+
+&i2c16 {
+ status = "okay";
+
+ fuel-gauge@55 {
+ compatible = "ti,bq28z610";
+ reg = <0x55>;
+ monitored-battery = <&battery>;
+ };
+};
+
+&tlmm {
+ pm8008_default: pm8008-default-state {
+ int-pins {
+ pins = "gpio112";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ reset-n-pins {
+ pins = "gpio93";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
+
+&vreg_f {
+ status = "disabled";
+};
--
2.54.0
^ permalink raw reply related [flat|nested] 7+ messages in thread