[PATCH 0/2] dt-bindings: clean up tab and trailing whitespace from examples

[PATCH 0/2] dt-bindings: clean up tab and trailing whitespace from examples

[Daniel Golle]

The earlier RFC of an automated DTS example style checker [1] is being
respun. Its v2 will ship a default 'relaxed' rule set that is intended
to produce zero output on the current tree, so it can be wired into
make dt_binding_check without a tail of warnings.

These two patches fix the only existing violations of the relaxed
rules: a single trailing whitespace and 15 files with literal tabs in
their DTS examples. With these applied, the v2 checker passes treewide
in default mode.

Posting separately so the cleanup can land independently of the tool.

[1] https://lore.kernel.org/all/cover.1776700167.git.daniel@makrotopia.org/

Daniel Golle (2):
  dt-bindings: misc: fsl,qoriq-mc: drop trailing whitespace
  dt-bindings: drop tab characters from DTS examples

 .../bindings/i2c/opencores,i2c-ocores.yaml    |  8 ++---
 .../bindings/iio/adc/st,spear600-adc.yaml     |  2 +-
 .../devicetree/bindings/input/imx-keypad.yaml | 32 +++++++++----------
 .../bindings/input/microchip,cap11xx.yaml     | 12 +++----
 .../input/touchscreen/ti,ads7843.yaml         |  4 +--
 .../devicetree/bindings/leds/leds-lp55xx.yaml |  2 +-
 .../media/mediatek,vcodec-encoder.yaml        |  2 +-
 .../media/mediatek,vcodec-subdev-decoder.yaml |  2 +-
 .../memory-controllers/nvidia,tegra20-mc.yaml |  4 +--
 .../samsung,exynos5422-dmc.yaml               |  2 +-
 .../bindings/misc/fsl,qoriq-mc.yaml           |  2 +-
 .../bindings/pci/mediatek-pcie-mt7623.yaml    |  4 +--
 .../bindings/pci/samsung,exynos-pcie.yaml     |  2 +-
 .../bindings/sound/davinci-mcasp-audio.yaml   |  4 +--
 .../bindings/sound/simple-card.yaml           |  6 ++--
 .../devicetree/bindings/usb/ti,j721e-usb.yaml |  8 ++---
 16 files changed, 48 insertions(+), 48 deletions(-)

-- 
2.54.0

[PATCH 1/2] dt-bindings: misc: fsl,qoriq-mc: drop trailing whitespace

[Daniel Golle]

Drop trailing whitespace from example.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
index df45ff56d444..801f305e0374 100644
--- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
+++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
@@ -166,7 +166,7 @@ examples:
          */
         ranges = <0x0 0x0 0x8 0x0c000000 0x4000000
                  0x1 0x0 0x8 0x18000000 0x8000000>;
-        
+
         /* define map for ICIDs 23-64 */
         iommu-map = <23 &smmu 23 41>;
         /* define msi map for ICIDs 23-64 */
-- 
2.54.0

[PATCH 2/2] dt-bindings: drop tab characters from DTS examples

[Daniel Golle]

YAML literal block scalars cannot use tabs for indent.
Replace tab separators (mostly between values and trailing /* ... */
comments) with single spaces.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 .../bindings/i2c/opencores,i2c-ocores.yaml    |  8 ++---
 .../bindings/iio/adc/st,spear600-adc.yaml     |  2 +-
 .../devicetree/bindings/input/imx-keypad.yaml | 32 +++++++++----------
 .../bindings/input/microchip,cap11xx.yaml     | 12 +++----
 .../input/touchscreen/ti,ads7843.yaml         |  4 +--
 .../devicetree/bindings/leds/leds-lp55xx.yaml |  2 +-
 .../media/mediatek,vcodec-encoder.yaml        |  2 +-
 .../media/mediatek,vcodec-subdev-decoder.yaml |  2 +-
 .../memory-controllers/nvidia,tegra20-mc.yaml |  4 +--
 .../samsung,exynos5422-dmc.yaml               |  2 +-
 .../bindings/pci/mediatek-pcie-mt7623.yaml    |  4 +--
 .../bindings/pci/samsung,exynos-pcie.yaml     |  2 +-
 .../bindings/sound/davinci-mcasp-audio.yaml   |  4 +--
 .../bindings/sound/simple-card.yaml           |  6 ++--
 .../devicetree/bindings/usb/ti,j721e-usb.yaml |  8 ++---
 15 files changed, 47 insertions(+), 47 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
index d9ef86729011..736e9a3eab8a 100644
--- a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
+++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
@@ -95,8 +95,8 @@ examples:
       interrupts = <10>;
       opencores,ip-clock-frequency = <20000000>;
 
-      reg-shift = <0>;	/* 8 bit registers */
-      reg-io-width = <1>;	/* 8 bit read/write */
+      reg-shift = <0>; /* 8 bit registers */
+      reg-io-width = <1>; /* 8 bit read/write */
     };
 
     i2c@b0000000 {
@@ -108,7 +108,7 @@ examples:
       clocks = <&osc>;
       clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
 
-      reg-shift = <0>;	/* 8 bit registers */
-      reg-io-width = <1>;	/* 8 bit read/write */
+      reg-shift = <0>; /* 8 bit registers */
+      reg-io-width = <1>; /* 8 bit read/write */
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml
index dd9ec3038703..c8b8f28541ce 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml
@@ -65,5 +65,5 @@ examples:
         interrupt-parent = <&vic1>;
         interrupts = <6>;
         sampling-frequency = <5000000>;
-        vref-external = <2500>;	/* 2.5V VRef */
+        vref-external = <2500>; /* 2.5V VRef */
     };
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml
index b110eb1f3358..175256cb1295 100644
--- a/Documentation/devicetree/bindings/input/imx-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml
@@ -66,20 +66,20 @@ examples:
         clocks = <&clks 0>;
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_kpp_1>;
-        linux,keymap = <0x00000067	/* KEY_UP */
-                        0x0001006c	/* KEY_DOWN */
-                        0x00020072	/* KEY_VOLUMEDOWN */
-                        0x00030066	/* KEY_HOME */
-                        0x0100006a	/* KEY_RIGHT */
-                        0x01010069	/* KEY_LEFT */
-                        0x0102001c	/* KEY_ENTER */
-                        0x01030073	/* KEY_VOLUMEUP */
-                        0x02000040	/* KEY_F6 */
-                        0x02010042	/* KEY_F8 */
-                        0x02020043	/* KEY_F9 */
-                        0x02030044	/* KEY_F10 */
-                        0x0300003b	/* KEY_F1 */
-                        0x0301003c	/* KEY_F2 */
-                        0x0302003d	/* KEY_F3 */
-                        0x03030074>;	/* KEY_POWER */
+        linux,keymap = <0x00000067 /* KEY_UP */
+                        0x0001006c /* KEY_DOWN */
+                        0x00020072 /* KEY_VOLUMEDOWN */
+                        0x00030066 /* KEY_HOME */
+                        0x0100006a /* KEY_RIGHT */
+                        0x01010069 /* KEY_LEFT */
+                        0x0102001c /* KEY_ENTER */
+                        0x01030073 /* KEY_VOLUMEUP */
+                        0x02000040 /* KEY_F6 */
+                        0x02010042 /* KEY_F8 */
+                        0x02020043 /* KEY_F9 */
+                        0x02030044 /* KEY_F10 */
+                        0x0300003b /* KEY_F1 */
+                        0x0301003c /* KEY_F2 */
+                        0x0302003d /* KEY_F3 */
+                        0x03030074>; /* KEY_POWER */
     };
diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
index 7ade03f1b32b..2d762193f1c0 100644
--- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -197,12 +197,12 @@ examples:
         microchip,sensitivity-delta-sense = <16>;
         microchip,input-threshold = <21>, <18>, <46>, <46>, <46>, <21>;
 
-        linux,keycodes = <103>,	/* KEY_UP */
-                         <106>,	/* KEY_RIGHT */
-                         <108>,	/* KEY_DOWN */
-                         <105>,	/* KEY_LEFT */
-                         <109>,	/* KEY_PAGEDOWN */
-                         <104>;	/* KEY_PAGEUP */
+        linux,keycodes = <103>, /* KEY_UP */
+                         <106>, /* KEY_RIGHT */
+                         <108>, /* KEY_DOWN */
+                         <105>, /* KEY_LEFT */
+                         <109>, /* KEY_PAGEDOWN */
+                         <104>; /* KEY_PAGEUP */
 
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
index 8f6335d7da1c..1b58fc263dce 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
@@ -165,9 +165,9 @@ examples:
 
         touchscreen@0 {
             compatible = "ti,tsc2046";
-            reg = <0>;	/* CS0 */
+            reg = <0>; /* CS0 */
             interrupt-parent = <&gpio1>;
-            interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
+            interrupts = <8 0>; /* BOOT6 / GPIO 8 */
             pendown-gpio = <&gpio1 8 0>;
             spi-max-frequency = <1000000>;
             vcc-supply = <&reg_vcc3>;
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index fe8aaecf3010..67637efac378 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -183,7 +183,7 @@ examples:
             compatible = "ti,lp8501";
             reg = <0x32>;
             clock-mode = /bits/ 8 <2>;
-            pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+            pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
             ti,charge-pump-mode = <LP55XX_CP_BYPASS>;
 
             led@0 {
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
index ebc615584f92..4505e66876a2 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -160,7 +160,7 @@ examples:
 
     vcodec_enc_vp8: vcodec@19002000 {
       compatible = "mediatek,mt8173-vcodec-enc-vp8";
-      reg =  <0x19002000 0x1000>;	/* VENC_LT_SYS */
+      reg =  <0x19002000 0x1000>; /* VENC_LT_SYS */
       interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
       iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
              <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
index bf8082d87ac0..d1d209cbbd43 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -232,7 +232,7 @@ examples:
             #address-cells = <2>;
             #size-cells = <2>;
             ranges = <0 0 0 0x16000000 0 0x40000>;
-            reg = <0 0x16000000 0 0x1000>;		/* VDEC_SYS */
+            reg = <0 0x16000000 0 0x1000>; /* VDEC_SYS */
             video-codec@10000 {
                 compatible = "mediatek,mtk-vcodec-lat";
                 reg = <0 0x10000 0 0x800>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml
index 55caf6905399..a33913fcd11f 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml
@@ -66,8 +66,8 @@ examples:
   - |
     memory-controller@7000f000 {
         compatible = "nvidia,tegra20-mc-gart";
-        reg = <0x7000f000 0x400>,	/* Controller registers */
-              <0x58000000 0x02000000>;	/* GART aperture */
+        reg = <0x7000f000 0x400>, /* Controller registers */
+              <0x58000000 0x02000000>; /* GART aperture */
         clocks = <&clock_controller 32>;
         clock-names = "mc";
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
index 783ac984d898..4cd5af38abce 100644
--- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -128,7 +128,7 @@ examples:
                       "mout_mx_mspll_ccore",
                       "mout_mclk_cdrex";
         operating-points-v2 = <&dmc_opp_table>;
-        devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
+        devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>,
                          <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
         device-handle = <&samsung_K3QF2F20DB>;
         vdd-supply = <&buck1_reg>;
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml
index e33bcc216e30..542252168388 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml
@@ -125,8 +125,8 @@ examples:
             phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
             power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
             bus-range = <0x00 0xff>;
-            ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000>,	/* I/O space */
-                     <0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
+            ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000>, /* I/O space */
+                     <0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */
 
             pcie@0,0 {
                 device_type = "pci";
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
index f20ed7e709f7..57a8f163dda5 100644
--- a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
@@ -109,7 +109,7 @@ examples:
         num-lanes = <1>;
         num-viewport = <3>;
         bus-range = <0x00 0xff>;
-        ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
+        ranges = <0x81000000 0 0   0x0c001000 0 0x00010000>,
                  <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
         vdd10-supply = <&ldo6_reg>;
         vdd18-supply = <&ldo7_reg>;
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
index 87559d0d079a..f8a602cee37b 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
@@ -248,13 +248,13 @@ examples:
       reg-names = "mpu";
       interrupts = <82>, <83>;
       interrupt-names = "tx", "rx";
-      op-mode = <0>;		/* MCASP_IIS_MODE */
+      op-mode = <0>; /* MCASP_IIS_MODE */
       tdm-slots = <2>;
       ti,async-mode;
       dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
       dma-names = "tx", "rx";
       serial-dir = <
-          0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
+          0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */
           0 0 0 0
           0 0 0 1
           2 0 0 0 >;
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
index a14716b2732f..23310f303be3 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.yaml
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -315,7 +315,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        simple-audio-card,dai-link@0 {		/* I2S - HDMI */
+        simple-audio-card,dai-link@0 {  /* I2S - HDMI */
             reg = <0>;
             format = "i2s";
             cpu {
@@ -326,7 +326,7 @@ examples:
             };
         };
 
-        simple-audio-card,dai-link@1 {		/* S/PDIF - HDMI */
+        simple-audio-card,dai-link@1 {  /* S/PDIF - HDMI */
             reg = <1>;
             cpu {
                 sound-dai = <&audio1>;
@@ -336,7 +336,7 @@ examples:
             };
         };
 
-        simple-audio-card,dai-link@2 {		/* S/PDIF - S/PDIF */
+        simple-audio-card,dai-link@2 {  /* S/PDIF - S/PDIF */
             reg = <2>;
             cpu {
                 sound-dai = <&audio2>;
diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
index 653a89586f4e..0aaaadb584e4 100644
--- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
@@ -88,7 +88,7 @@ examples:
             power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
             clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
             clock-names = "ref", "lpm";
-            assigned-clocks = <&k3_clks 288 15>;	/* USB2_REFCLK */
+            assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */
             assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
             #address-cells = <2>;
             #size-cells = <2>;
@@ -99,9 +99,9 @@ examples:
                         <0x00 0x6010000 0x00 0x10000>,
                         <0x00 0x6020000 0x00 0x10000>;
                   reg-names = "otg", "xhci", "dev";
-                  interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
-                               <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
-                               <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+                  interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+                               <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+                               <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
                   interrupt-names = "host",
                                     "peripheral",
                                     "otg";
-- 
2.54.0

Re: [PATCH 2/2] dt-bindings: drop tab characters from DTS examples

[Krzysztof Kozlowski]

On 29/04/2026 05:48, Daniel Golle wrote:
> YAML literal block scalars cannot use tabs for indent.
> Replace tab separators (mostly between values and trailing /* ... */
> comments) with single spaces.
> 
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
>  .../bindings/i2c/opencores,i2c-ocores.yaml    |  8 ++---
>  .../bindings/iio/adc/st,spear600-adc.yaml     |  2 +-
>  .../devicetree/bindings/input/imx-keypad.yaml | 32 +++++++++----------
>  .../bindings/input/microchip,cap11xx.yaml     | 12 +++----
>  .../input/touchscreen/ti,ads7843.yaml         |  4 +--
>  .../devicetree/bindings/leds/leds-lp55xx.yaml |  2 +-
>  .../media/mediatek,vcodec-encoder.yaml        |  2 +-
>  .../media/mediatek,vcodec-subdev-decoder.yaml |  2 +-
>  .../memory-controllers/nvidia,tegra20-mc.yaml |  4 +--
>  .../samsung,exynos5422-dmc.yaml               |  2 +-
>  .../bindings/pci/mediatek-pcie-mt7623.yaml    |  4 +--
>  .../bindings/pci/samsung,exynos-pcie.yaml     |  2 +-
>  .../bindings/sound/davinci-mcasp-audio.yaml   |  4 +--
>  .../bindings/sound/simple-card.yaml           |  6 ++--
>  .../devicetree/bindings/usb/ti,j721e-usb.yaml |  8 ++---
>  15 files changed, 47 insertions(+), 47 deletions(-)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Re: [PATCH 1/2] dt-bindings: misc: fsl,qoriq-mc: drop trailing whitespace

[Krzysztof Kozlowski]

On 29/04/2026 05:48, Daniel Golle wrote:
> Drop trailing whitespace from example.
> 
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
>  Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Re: [PATCH 1/2] dt-bindings: misc: fsl,qoriq-mc: drop trailing whitespace

[Rob Herring (Arm)]

On Wed, 29 Apr 2026 04:48:38 +0100, Daniel Golle wrote:
> Drop trailing whitespace from example.
> 
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
>  Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Applied, thanks!

Re: [PATCH 2/2] dt-bindings: drop tab characters from DTS examples

[Rob Herring (Arm)]

On Wed, 29 Apr 2026 04:48:56 +0100, Daniel Golle wrote:
> YAML literal block scalars cannot use tabs for indent.
> Replace tab separators (mostly between values and trailing /* ... */
> comments) with single spaces.
> 
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
>  .../bindings/i2c/opencores,i2c-ocores.yaml    |  8 ++---
>  .../bindings/iio/adc/st,spear600-adc.yaml     |  2 +-
>  .../devicetree/bindings/input/imx-keypad.yaml | 32 +++++++++----------
>  .../bindings/input/microchip,cap11xx.yaml     | 12 +++----
>  .../input/touchscreen/ti,ads7843.yaml         |  4 +--
>  .../devicetree/bindings/leds/leds-lp55xx.yaml |  2 +-
>  .../media/mediatek,vcodec-encoder.yaml        |  2 +-
>  .../media/mediatek,vcodec-subdev-decoder.yaml |  2 +-
>  .../memory-controllers/nvidia,tegra20-mc.yaml |  4 +--
>  .../samsung,exynos5422-dmc.yaml               |  2 +-
>  .../bindings/pci/mediatek-pcie-mt7623.yaml    |  4 +--
>  .../bindings/pci/samsung,exynos-pcie.yaml     |  2 +-
>  .../bindings/sound/davinci-mcasp-audio.yaml   |  4 +--
>  .../bindings/sound/simple-card.yaml           |  6 ++--
>  .../devicetree/bindings/usb/ti,j721e-usb.yaml |  8 ++---
>  15 files changed, 47 insertions(+), 47 deletions(-)
> 

Applied, thanks!