From: Enzo Adriano <enzo.adriano.code@gmail.com>
To: andre.przywara@arm.com, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, wens@kernel.org, jernej.skrabec@gmail.com,
samuel@sholland.org
Cc: Maxime Ripard <mripard@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
Junhui Liu <junhui.liu@pigmoral.tech>,
Jerome Brunet <jbrunet@baylibre.com>,
Pablo Mazzini <pmazzini@gmail.com>,
Vinicius Pedrosa <vinicius.eduardo.pedrosa@gmail.com>,
Alexander Sverdlin <alex@sverdlin.org>,
Jun Yan <jerrysteve1101@gmail.com>,
Lukas Schmid <lukas.schmid@netcube.li>
Subject: [PATCH v4 0/3] arm64: dts: allwinner: add A733/Cubie A7S support
Date: Thu, 19 Nov 2026 13:09:12 -0500 [thread overview]
Message-ID: <cover.1795034153.git.enzo.adriano.code@gmail.com> (raw)
This series adds the initial Allwinner A733 and Radxa Cubie A7S device
trees for UART0, the AXP318W PMIC and 3.3 V microSD.
Base: sunxi/for-next (03b3355ed7a39b4416f0d0a39061479b1aa13196).
Previous posting (v3):
https://lore.kernel.org/r/cover.1794227241.git.enzo.adriano.code@gmail.com
Changes in v4:
- 1/3: Carry Alexander Sverdlin's Reviewed-by.
- 2/3: Add a one-cluster CPU map and A55/A76 PMUs on PPI 7, using
GIC ppi-partitions. Change #interrupt-cells from 3 to 4 and add a
fourth cell to every GIC interrupt specifier. Drop Vinicius Pedrosa's
Tested-by because of the interrupt encoding change.
- 3/3: Sort root nodes and put status last. Move boot history below ---.
Runtime dependencies in application order:
[1] AXP318W PMIC v8
https://lore.kernel.org/r/20260910-axp318-regulator-v8-0-e906a61a7f3d@baylibre.com
[2] Pinctrl IRQ-bank v3
https://lore.kernel.org/r/20261025142412.112216-1-pmazzini@gmail.com
[3] A733 8250_dw v2, patches 1-4
https://lore.kernel.org/r/cover.1792439398.git.vinicius.eduardo.pedrosa@gmail.com
[4] Firmware-clock v2 for vendor-firmware warm reboot
https://lore.kernel.org/r/20261112-a733-fwclk-v2@gmail.com
[5] Pinctrl voltage-mode v3
https://lore.kernel.org/r/20261109-a733-pinctrl-v3@gmail.com
A7S DTB/schema checks need [1] 3/5, [2] 2/3 and [3] 3/4 before v4.
Validation: clean git am, arm64 defconfig Image, arm/sunxi.yaml binding
check and warning-free A7S W=2 CHECK_DTBS=y. The compiled DTB has one
eight-core cluster and two disjoint PMU partitions.
A November 18 RAM boot on Cubie A7S with vendor firmware used the base
and runtime dependencies above. Two context-only adaptations were needed:
PMIC v8 regulator allocation context and pinctrl voltage-mode v3 IRQ-bank
map context. CPUs 0-7 came online in one cluster. The A55 PMU covered
CPUs 0-5 and the A76 PMU CPUs 6-7; cycles and instructions counted and
PPI 7 overflow samples were observed on each CPU. The timer, console,
AXP318W probe and MMC0 read-only transfers worked; warm reboot returned
to vendor Linux unaided.
Untested: PMIC/NMI interrupt delivery, card writes, hotplug, suspend,
power-off, CPU capacity, 1.8 V switching, other UART/I2C and storage
instances, RTC alarms, EL2/ITS/MSI, and physical BLDO2 voltage.
Enzo Adriano (3):
dt-bindings: arm: sunxi: document Radxa Cubie A7S
arm64: dts: allwinner: add A733 SoC description
arm64: dts: allwinner: add Radxa Cubie A7S board
.../devicetree/bindings/arm/sunxi.yaml | 5 +
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun60i-a733-cubie-a7s.dts | 287 ++++++++
.../arm64/boot/dts/allwinner/sun60i-a733.dtsi | 657 ++++++++++++++++++
4 files changed, 950 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun60i-a733-cubie-a7s.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun60i-a733.dtsi
base-commit: 03b3355ed7a39b4416f0d0a39061479b1aa13196
next reply other threads:[~2026-11-19 18:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 18:09 Enzo Adriano [this message]
2026-11-19 18:09 ` [PATCH v4 1/3] dt-bindings: arm: sunxi: document Radxa Cubie A7S Enzo Adriano
2026-11-19 18:09 ` [PATCH v4 2/3] arm64: dts: allwinner: add A733 SoC description Enzo Adriano
2026-11-19 18:30 ` sashiko-bot
2026-11-19 18:09 ` [PATCH v4 3/3] arm64: dts: allwinner: add Radxa Cubie A7S board Enzo Adriano
2026-11-19 18:26 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1795034153.git.enzo.adriano.code@gmail.com \
--to=enzo.adriano.code@gmail.com \
--cc=alex@sverdlin.org \
--cc=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=jernej.skrabec@gmail.com \
--cc=jerrysteve1101@gmail.com \
--cc=junhui.liu@pigmoral.tech \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=lukas.schmid@netcube.li \
--cc=mripard@kernel.org \
--cc=pmazzini@gmail.com \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=vinicius.eduardo.pedrosa@gmail.com \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox