Re: [PATCH v5 5/6] arm64: dts: qcom: ipq5018: add node required for Bluetooth support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 7/9/26 11:18 AM, George Moussalem via B4 Relay wrote:
> From: George Moussalem <george.moussalem@outlook.com>
> 
> Add node to enable Bluetooth support on the IPQ5018 platform.
> 
> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> Signed-off-by: George Moussalem <george.moussalem@outlook.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 6f8004a22a1f..8c252fa3ff5b 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -453,6 +453,22 @@ tcsr: syscon@1937000 {
>  			reg = <0x01937000 0x21000>;
>  		};
>  
> +		bluetooth: bluetooth@7000000 {
> +			compatible = "qcom,ipq5018-bt";
> +			reg = <0x07000000 0x58000>;
> +
> +			firmware-name = "qca/bt_fw_patch.mbn";
> +
> +			clocks = <&gcc GCC_BTSS_LPO_CLK>;
> +			clock-names = "lpo";
> +			resets = <&gcc GCC_BTSS_BCR>;
> +
> +			qcom,ipc = <&apcs_glb 8 23>;
> +			interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
> +
> +			status = "disabled";

Since the firmware is unsigned, I think it could make sense to
enable this by default

any which way

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad