From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Cc: sre@kernel.org, Hans de Goede <hansg@kernel.org>,
linux@roeck-us.net, andersson@kernel.org,
konradybcio@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, bryan.odonoghue@linaro.org,
platform-driver-x86@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
linux-hwmon@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, neil.armstrong@linaro.org,
gaurav.kohli@oss.qualcomm.com,
manaf.pallikunhi@oss.qualcomm.com,
priyansh.jain@oss.qualcomm.com
Subject: Re: [PATCH v4 1/2] platform: arm64: lenovo-thinkpad-t14s-ec: Add hwmon support for temperatures
Date: Mon, 6 Jul 2026 19:12:13 +0300 (EEST) [thread overview]
Message-ID: <eb7ebc45-f76a-4d5d-31f5-46f95e6977e6@linux.intel.com> (raw)
In-Reply-To: <20260706160830.17698-2-daniel.lezcano@oss.qualcomm.com>
[-- Attachment #1: Type: text/plain, Size: 6748 bytes --]
On Mon, 6 Jul 2026, Daniel Lezcano wrote:
> Expose the Lenovo ThinkPad T14s EC environmental sensors through
> the hwmon subsystem.
>
> The driver now registers a hwmon device providing access to six EC
> temperature sensors corresponding to the SoC, keyboard area, base
> cover, PMIC/charging circuitry, QTM module and SSD. Sensor labels
> are exported to allow user space to identify each measurement.
>
> This allows standard monitoring tools such as lm-sensors to report
> platform temperatures.
>
> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on T14s OLED
> Signed-off-by: Daniel Lezcano daniel.lezcano@oss.qualcomm.com
> ---
> drivers/platform/arm64/Kconfig | 1 +
> drivers/platform/arm64/lenovo-thinkpad-t14s.c | 131 ++++++++++++++++++
> 2 files changed, 132 insertions(+)
>
> diff --git a/drivers/platform/arm64/Kconfig b/drivers/platform/arm64/Kconfig
> index 10f905d7d6bf..121043348740 100644
> --- a/drivers/platform/arm64/Kconfig
> +++ b/drivers/platform/arm64/Kconfig
> @@ -75,6 +75,7 @@ config EC_LENOVO_THINKPAD_T14S
> depends on ARCH_QCOM || COMPILE_TEST
> depends on I2C
> depends on INPUT
> + depends on HWMON
> select INPUT_SPARSEKMAP
> select LEDS_CLASS
> select NEW_LEDS
> diff --git a/drivers/platform/arm64/lenovo-thinkpad-t14s.c b/drivers/platform/arm64/lenovo-thinkpad-t14s.c
> index 5590302a5694..fc480f093238 100644
> --- a/drivers/platform/arm64/lenovo-thinkpad-t14s.c
> +++ b/drivers/platform/arm64/lenovo-thinkpad-t14s.c
> @@ -11,6 +11,7 @@
> #include <linux/delay.h>
> #include <linux/dev_printk.h>
> #include <linux/err.h>
> +#include <linux/hwmon.h>
> #include <linux/i2c.h>
> #include <linux/input.h>
> #include <linux/input/sparse-keymap.h>
> @@ -21,6 +22,7 @@
> #include <linux/regmap.h>
> #include <linux/slab.h>
> #include <linux/pm.h>
> +#include <linux/units.h>
>
> #define T14S_EC_CMD_ECRD 0x02
> #define T14S_EC_CMD_ECWR 0x03
> @@ -67,6 +69,13 @@
> #define T14S_EC_EVT_KEY_FN_F11 0x7a
> #define T14S_EC_EVT_KEY_FN_G 0x7e
>
> +#define T14S_EC_SYS_THERM0 0x78 /* SoC (CPU+GPU) */
> +#define T14S_EC_SYS_THERM1 0x79 /* Keyboard */
> +#define T14S_EC_SYS_THERM2 0x7a /* Back cover */
> +#define T14S_EC_SYS_THERM3 0x7b /* Charger / PMIC */
> +#define T14S_EC_SYS_THERM6 0x7c /* QTM West */
> +#define T14S_EC_SYS_THERM7 0x7d /* SSD */
> +
> /* Hardware LED blink rate is 1 Hz (500ms off, 500ms on) */
> #define T14S_EC_BLINK_RATE_ON_OFF_MS 500
>
> @@ -93,9 +102,19 @@ struct t14s_ec_led_classdev {
> struct t14s_ec *ec;
> };
>
> +struct t14s_ec_hwmon_sys_thermx {
> + const char *label;
> + int reg;
> +};
> +
> +struct t14s_ec_hwmon {
> + struct t14s_ec_hwmon_sys_thermx *sys_thermx;
> +};
> +
> struct t14s_ec {
> struct regmap *regmap;
> struct device *dev;
> + struct t14s_ec_hwmon ec_hwmon;
> struct t14s_ec_led_classdev led_pwr_btn;
> struct t14s_ec_led_classdev led_chrg_orange;
> struct t14s_ec_led_classdev led_chrg_white;
> @@ -555,6 +574,114 @@ static irqreturn_t t14s_ec_irq_handler(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> +static umode_t t14s_ec_hwmon_is_visible(const void *drvdata,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + switch (type) {
> + case hwmon_temp:
> + if (attr == hwmon_temp_input ||
> + attr == hwmon_temp_label)
> + return 0444;
> + break;
> + default:
> + return 0;
> + }
> +
> + return 0;
> +}
> +
> +static int t14s_ec_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, const char **str)
> +{
> + struct t14s_ec *ec = dev_get_drvdata(dev);
> +
> + switch (type) {
> + case hwmon_temp:
> + if (attr == hwmon_temp_label) {
> + *str = ec->ec_hwmon.sys_thermx[channel].label;
> + return 0;
> + }
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static int t14s_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct t14s_ec *ec = dev_get_drvdata(dev);
> + unsigned int value;
> + int ret;
> +
> + switch (type) {
> + case hwmon_temp:
> + if (attr == hwmon_temp_input) {
> + ret = t14s_ec_read(ec, ec->ec_hwmon.sys_thermx[channel].reg, &value);
> + if (ret)
> + return ret;
> + *val = value * MILLIDEGREE_PER_DEGREE;
> +
> + return 0;
> + }
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static const struct hwmon_ops t14s_ec_hwmon_ops = {
> + .is_visible = t14s_ec_hwmon_is_visible,
> + .read = t14s_ec_hwmon_read,
> + .read_string = t14s_ec_hwmon_read_string,
> +};
> +
> +static const struct hwmon_channel_info *t14s_ec_hwmon_info[] = {
> + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
> + HWMON_CHANNEL_INFO(temp,
> + HWMON_T_INPUT | HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_LABEL,
> + HWMON_T_INPUT | HWMON_T_LABEL),
> + NULL
> +};
> +
> +static const struct hwmon_chip_info t14s_ec_chip_info = {
> + .ops = &t14s_ec_hwmon_ops,
> + .info = t14s_ec_hwmon_info,
> +};
> +
> +static int t14s_ec_hwmon_probe(struct t14s_ec *ec)
> +{
> + struct device *dev;
> + struct t14s_ec_hwmon_sys_thermx sys_thermx[] = {
> + { .label = "soc", .reg = T14S_EC_SYS_THERM0 },
> + { .label = "keyboard", .reg = T14S_EC_SYS_THERM1 },
> + { .label = "base", .reg = T14S_EC_SYS_THERM2 },
> + { .label = "charging", .reg = T14S_EC_SYS_THERM3 },
> + { .label = "qtm", .reg = T14S_EC_SYS_THERM6 },
> + { .label = "ssd", .reg = T14S_EC_SYS_THERM7 },
> + };
> +
> + ec->ec_hwmon.sys_thermx = devm_kmemdup_array(ec->dev, sys_thermx,
> + ARRAY_SIZE(sys_thermx),
> + sizeof(sys_thermx[0]), GFP_KERNEL);
> + if (!ec->ec_hwmon.sys_thermx)
> + return -ENOMEM;
> +
> + dev = devm_hwmon_device_register_with_info(ec->dev, "t14s_ec", ec,
> + &t14s_ec_chip_info, NULL);
> +
> + return PTR_ERR_OR_ZERO(dev);
> +}
> +
> static int t14s_ec_probe(struct i2c_client *client)
> {
> struct device *dev = &client->dev;
> @@ -590,6 +717,10 @@ static int t14s_ec_probe(struct i2c_client *client)
> if (ret < 0)
> return ret;
>
> + ret = t14s_ec_hwmon_probe(ec);
> + if (ret < 0)
> + return ret;
> +
> ret = devm_request_threaded_irq(dev, client->irq, NULL,
> t14s_ec_irq_handler,
> IRQF_ONESHOT, dev_name(dev), ec);
>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
--
i.
next prev parent reply other threads:[~2026-07-06 16:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-06 16:08 [PATCH v4 0/2] Lenovo ThinkPad T14s EC thermal monitoring and thermal zone integration Daniel Lezcano
2026-07-06 16:08 ` [PATCH v4 1/2] platform: arm64: lenovo-thinkpad-t14s-ec: Add hwmon support for temperatures Daniel Lezcano
2026-07-06 16:12 ` Ilpo Järvinen [this message]
2026-07-06 16:14 ` sashiko-bot
2026-07-06 16:08 ` [PATCH v4 2/2] arm64: dts: qcom: x1e78100-t14s: Add thermal zones for keyboard skin and charging sensors Daniel Lezcano
2026-07-06 16:16 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eb7ebc45-f76a-4d5d-31f5-46f95e6977e6@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@oss.qualcomm.com \
--cc=devicetree@vger.kernel.org \
--cc=gaurav.kohli@oss.qualcomm.com \
--cc=hansg@kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=manaf.pallikunhi@oss.qualcomm.com \
--cc=neil.armstrong@linaro.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=priyansh.jain@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox