Re: [PATCH RFC 02/12] dt-bindings: usb: qcom,pmic-typec: Update example with vbus-supply

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

On 26/09/2026 13:40, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
> 
> The vdd-vbus-supply is deprecated, thus don't suggest deprecated usage in
> example.
> 
> Assisted-by: LLM
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>   Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> index ba790c4488b76..2c8b11e92fb28 100644
> --- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> @@ -163,29 +163,30 @@ examples:
>                                 "sig-rx",
>                                 "msg-tx",
>                                 "msg-rx",
>                                 "msg-tx-failed",
>                                 "msg-tx-discarded",
>                                 "msg-rx-discarded",
>                                 "fr-swap";
>   
> -            vdd-vbus-supply = <&pm8150b_vbus>;
>               vdd-pdphy-supply = <&vreg_l2a_3p1>;
>   
>               connector {
>                   compatible = "usb-c-connector";
>   
>                   power-role = "source";
>                   data-role = "dual";
>                   self-powered;
>   
>                   source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_DUAL_ROLE |
>                                  PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>;
>   
> +                vbus-supply = <&pm8150b_vbus>;
> +
>                   ports {
>                       #address-cells = <1>;
>                       #size-cells = <0>;
>   
>                       port@0 {
>                           reg = <0>;
>                           pmic_typec_hs_in: endpoint {
>                               remote-endpoint = <&usb_hs_out>;
> 
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>