* Re: [PATCH v4 1/2] memory: ti-aemif: introduce AEMIF driver
From: Greg KH @ 2014-02-19 14:34 UTC (permalink / raw)
To: Ivan Khoronzhuk
Cc: santosh.shilimkar-l0cyMroinI0, rob-VoJi6FS/r0vR7s880joybQ,
linux-lFZ/pmaqli7XmaaqVzeoHQ,
galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
swarren-3lzwWm7+Weoh9ZMKESR00Q,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
grygorii.strashko-l0cyMroinI0, dwmw2-wEGCiKHe2LqWVfeAwA7xHQ,
nsekhar-l0cyMroinI0, [initial author] Murali Karicheri
In-Reply-To: <53048822.2080307-l0cyMroinI0@public.gmane.org>
On Wed, Feb 19, 2014 at 12:32:02PM +0200, Ivan Khoronzhuk wrote:
> >> + aemif->clk = devm_clk_get(dev, NULL);
> >> + if (IS_ERR(aemif->clk)) {
> >> + dev_err(dev, "cannot get clock 'aemif'\n");
> >> + return PTR_ERR(aemif->clk);
> > No freeing memory?
>
> There is no need to free memory explicitly.
> devm_kzalloc is used instead of kzalloc.
Yes, but where does the device on the error path get removed?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC
From: Arnd Bergmann @ 2014-02-19 14:38 UTC (permalink / raw)
To: Philipp Zabel
Cc: Mark Rutland, devicetree, Kukjin Kim, Tomasz Figa, Kyungmin Park,
Rob Herring, Thomas Abraham, kernel, Shawn Guo, linux-arm-kernel
In-Reply-To: <1392802255.3445.18.camel@pizza.hi.pengutronix.de>
On Wednesday 19 February 2014, Philipp Zabel wrote:
> Am Dienstag, den 18.02.2014, 19:10 +0100 schrieb Arnd Bergmann:
> > On Tuesday 18 February 2014 16:34:41 Philipp Zabel wrote:
> > > +
> > > +Example of a device that is part of a power domain:
> > > +
> > > + vpu: vpu@02040000 {
> > > + reg = <0x02040000 0x3c000>;
> > > + /* ... */
> > > + fsl,power-domain = <&pd_pu>;
> > > + /* ... */
> > > + };
> > > +
> >
> > I'm really not too happy about platforms starting to add random
> > bindings for power domains. Unfortunately I didn't catch exynos
> > doing this first, but I don't want to see another platform like
> > that.
> >
> > Can we please come up with a proper generic power domain binding
> > first and then add platform specific users?
>
> what is the process here? I've seen the samsung bindings and copied the
> pattern. I guess the Exynos bindings are set in stone, and the i.MX
> power domains can be handled using the same bindings.
* First of all, get the pm domain maintainers into the loop, then make
sure all other users of pm domains are aware of what you are doing.
* Come up with a way to describe a pm_domain in a sufficiently generic
way. It's possible you just need a phandle, but experience on other
subsystems suggests that it helps to allow arguments, as we do for
clocks, dmas, mailboxes, etc.
* Draft a generic binding that can work on all platforms
* Implement support for the generic binding in the platform independent
code.
* Add a specific binding for your hardware.
* Implement support for your hardware binding on top of the generic
code.
* Get everyone involved to Ack the generic binding and implementation.
Arnd
^ permalink raw reply
* Re: [PATCH v6 01/18] libahci: Allow drivers to override start_engine
From: Tejun Heo @ 2014-02-19 14:42 UTC (permalink / raw)
To: Hans de Goede
Cc: Maxime Ripard, Oliver Schinagl, Richard Zhu, Roger Quadros,
Lee Jones, linux-ide, linux-arm-kernel, devicetree, linux-sunxi
In-Reply-To: <1392811320-3132-2-git-send-email-hdegoede@redhat.com>
Hello,
On Wed, Feb 19, 2014 at 01:01:43PM +0100, Hans de Goede wrote:
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index 2289efd..2c04211 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -323,6 +323,8 @@ struct ahci_host_priv {
> u32 em_msg_type; /* EM message type */
> struct clk *clk; /* Only for platforms supporting clk */
> void *plat_data; /* Other platform data */
> + /* Optional ahci_start_engine override */
> + void (*start_engine)(struct ata_port *ap);
Can you please add that this gets initialized to the default during
save_initial_config and can be overridden anytime before the host is
activated?
> @@ -500,6 +501,9 @@ void ahci_save_initial_config(struct device *dev,
> hpriv->cap = cap;
> hpriv->cap2 = cap2;
> hpriv->port_map = port_map;
> +
> + if (!hpriv->start_engine)
> + hpriv->start_engine = ahci_start_engine;
Please update the function comment accordingly.
> -void ahci_start_engine(struct ata_port *ap)
> +static void ahci_start_engine(struct ata_port *ap)
> {
> void __iomem *port_mmio = ahci_port_base(ap);
> u32 tmp;
> @@ -576,7 +580,6 @@ void ahci_start_engine(struct ata_port *ap)
> writel(tmp, port_mmio + PORT_CMD);
> readl(port_mmio + PORT_CMD); /* flush */
> }
> -EXPORT_SYMBOL_GPL(ahci_start_engine);
Why are we making ahci_start_engine() static? Wouldn't there likely
be users who would do more things before or after ahci_start_engine()?
Also, why is there no explanation of this change in the patch
description?
Thanks.
--
tejun
^ permalink raw reply
* Re: [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC
From: Tomasz Figa @ 2014-02-19 14:51 UTC (permalink / raw)
To: Arnd Bergmann, Philipp Zabel
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Shawn Guo,
Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ, Rob Herring, Thomas Abraham,
Kyungmin Park, Kukjin Kim
In-Reply-To: <201402191538.08507.arnd-r2nGTMty4D4@public.gmane.org>
On 19.02.2014 15:38, Arnd Bergmann wrote:
> On Wednesday 19 February 2014, Philipp Zabel wrote:
>
>> Am Dienstag, den 18.02.2014, 19:10 +0100 schrieb Arnd Bergmann:
>>> On Tuesday 18 February 2014 16:34:41 Philipp Zabel wrote:
>>>> +
>>>> +Example of a device that is part of a power domain:
>>>> +
>>>> + vpu: vpu@02040000 {
>>>> + reg = <0x02040000 0x3c000>;
>>>> + /* ... */
>>>> + fsl,power-domain = <&pd_pu>;
>>>> + /* ... */
>>>> + };
>>>> +
>>>
>>> I'm really not too happy about platforms starting to add random
>>> bindings for power domains. Unfortunately I didn't catch exynos
>>> doing this first, but I don't want to see another platform like
>>> that.
>>>
>>> Can we please come up with a proper generic power domain binding
>>> first and then add platform specific users?
>>
>> what is the process here? I've seen the samsung bindings and copied the
>> pattern. I guess the Exynos bindings are set in stone, and the i.MX
>> power domains can be handled using the same bindings.
>
> * First of all, get the pm domain maintainers into the loop, then make
> sure all other users of pm domains are aware of what you are doing.
>
> * Come up with a way to describe a pm_domain in a sufficiently generic
> way. It's possible you just need a phandle, but experience on other
> subsystems suggests that it helps to allow arguments, as we do for
> clocks, dmas, mailboxes, etc.
>
> * Draft a generic binding that can work on all platforms
>
> * Implement support for the generic binding in the platform independent
> code.
>
> * Add a specific binding for your hardware.
>
> * Implement support for your hardware binding on top of the generic
> code.
>
> * Get everyone involved to Ack the generic binding and implementation.
>
> Arnd
>
Just wanted to share a link with you. ;)
http://www.spinics.net/lists/devicetree/msg18051.html
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v6 04/18] ahci-platform: Add support for devices with more then 1 clock
From: Tejun Heo @ 2014-02-19 14:52 UTC (permalink / raw)
To: Hans de Goede
Cc: Maxime Ripard, Oliver Schinagl, Richard Zhu, Roger Quadros,
Lee Jones, linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
In-Reply-To: <1392811320-3132-5-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On Wed, Feb 19, 2014 at 01:01:46PM +0100, Hans de Goede wrote:
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 434ab89..aaa0c08 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -87,6 +87,44 @@ static struct scsi_host_template ahci_platform_sht = {
> AHCI_SHT("ahci_platform"),
> };
>
> +
> +int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
Throughout the series, there are mixtures of one and two blank lines
in front of functions, let's just do one consistently. Also, can you
please add proper function comments on top of the exported functions?
> +{
> + int c, rc;
> +
> + for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
> + rc = clk_prepare_enable(hpriv->clks[c]);
> + if (rc)
> + goto disable_unprepare_clk;
> + }
> + return 0;
> +
> +disable_unprepare_clk:
> + while (--c >= 0)
> + clk_disable_unprepare(hpriv->clks[c]);
> + return rc;
> +}
> +EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
> +
> +void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
> +{
> + int c;
> +
> + for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
> + if (hpriv->clks[c])
> + clk_disable_unprepare(hpriv->clks[c]);
> +}
> +EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
> +
> +
> +static void ahci_put_clks(struct ahci_host_priv *hpriv)
> +{
> + int c;
> +
> + for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
> + clk_put(hpriv->clks[c]);
> +}
Urgh, clk can't do devm? ahci_platform itself should be able to build
devmized interface using devres_alloc() or devm_add_action().
Eh.... maybe later.
> @@ -131,17 +167,26 @@ static int ahci_probe(struct platform_device *pdev)
> return -ENOMEM;
> }
>
> - hpriv->clk = clk_get(dev, NULL);
> - if (IS_ERR(hpriv->clk)) {
> - dev_err(dev, "can't get clock\n");
> - } else {
> - rc = clk_prepare_enable(hpriv->clk);
> - if (rc) {
> - dev_err(dev, "clock prepare enable failed");
> - goto free_clk;
> + max_clk = dev->of_node ? AHCI_MAX_CLKS : 1;
> + for (i = 0; i < max_clk; i++) {
> + if (i == 0)
> + clk = clk_get(dev, NULL); /* For old platform init */
> + else
> + clk = of_clk_get(dev->of_node, i);
> +
> + if (IS_ERR(clk)) {
> + rc = PTR_ERR(clk);
> + if (rc == -EPROBE_DEFER)
> + goto free_clk;
> + break;
> }
> + hpriv->clks[i] = clk;
> }
Wouldn't it be nice to have some eplanation on why clk init path
diverges depending on whether dev->of_node is NULL or not? In
general, the patchset seems dearth on comment side.
Thanks.
--
tejun
^ permalink raw reply
* Re: [PATCH v6 05/18] ahci-platform: Add support for an optional regulator for sata-target power
From: Tejun Heo @ 2014-02-19 14:53 UTC (permalink / raw)
To: Hans de Goede
Cc: Maxime Ripard, Oliver Schinagl, Richard Zhu, Roger Quadros,
Lee Jones, linux-ide, linux-arm-kernel, devicetree, linux-sunxi
In-Reply-To: <1392811320-3132-6-git-send-email-hdegoede@redhat.com>
On Wed, Feb 19, 2014 at 01:01:47PM +0100, Hans de Goede wrote:
> @@ -268,6 +281,9 @@ pdata_exit:
> pdata->exit(dev);
> disable_unprepare_clk:
> ahci_disable_clks(hpriv);
> +disable_regulator:
> + if (hpriv->target_pwr)
> + regulator_disable(hpriv->target_pwr);
The same thing with clks, I'd much prefer to see ahci_platform doing
devres wrapping so that its consumers wouldn't have to worry about
tearing stuff down.
Thanks.
--
tejun
^ permalink raw reply
* Re: [PATCH v4 2/4] of: reimplement the matching method for __of_match_node()
From: Rob Herring @ 2014-02-19 14:54 UTC (permalink / raw)
To: Grant Likely
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Kevin Hao, Rob Herring, Sebastian Hesselbarth
In-Reply-To: <1392819290-1044-3-git-send-email-grant.likely@linaro.org>
On Wed, Feb 19, 2014 at 8:14 AM, Grant Likely <grant.likely@linaro.org> wrote:
> From: Kevin Hao <haokexin@gmail.com>
>
> In the current implementation of __of_match_node(), it will compare
> each given match entry against all the node's compatible strings
> with of_device_is_compatible().
>
> To achieve multiple compatible strings per node with ordering from
> specific to generic, this requires given matches to be ordered from
> specific to generic. For most of the drivers this is not true and
> also an alphabetical ordering is more sane there.
>
> Therefore, we define a following priority order for the match, and
> then scan all the entries to find the best match.
> 1. specific compatible && type && name
> 2. specific compatible && type
> 3. specific compatible && name
> 4. specific compatible
> 5. general compatible && type && name
> 6. general compatible && type
> 7. general compatible && name
> 8. general compatible
> 9. type && name
> 10. type
> 11. name
While I agree this should be the right order, I worry that this may be
changing the matching in some case as all previous attempts have done.
>
> v4: Short-circuit failure cases instead of mucking with score, and
> remove extra __of_device_is_compatible() wrapper stub.
> Move scoring logic directly into __of_device_is_compatible()
>
> v3: Also need to bail out when there does have a compatible member in match
> entry, but it doesn't match with the device node's compatible.
>
> v2: Fix the bug such as we get the same score for the following two match
> entries with the empty node 'name2 { };'
> struct of_device_id matches[] = {
> {.name = "name2", },
> {.name = "name2", .type = "type1", },
> {}
> };
>
> Signed-off-by: Kevin Hao <haokexin@gmail.com>
> [grant.likely: added v4 changes]
> Signed-off-by: Grant Likely <grant.likely@linaro.org>
> ---
> drivers/of/base.c | 108 +++++++++++++++++++++++++++++++++++++-----------------
> 1 file changed, 74 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/of/base.c b/drivers/of/base.c
> index ba195fbce4c6..30ffc291d0a0 100644
> --- a/drivers/of/base.c
> +++ b/drivers/of/base.c
> @@ -342,27 +342,73 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
> }
> EXPORT_SYMBOL(of_get_cpu_node);
>
> -/** Checks if the given "compat" string matches one of the strings in
> - * the device's "compatible" property
> +/**
> + * __of_device_is_compatible() - Check if the node matches given constraints
> + * @device: pointer to node
> + * @compat: required compatible string, NULL or "" for any match
> + * @type: required device_type value, NULL or "" for any match
> + * @name: required node name, NULL or "" for any match
> + *
> + * Checks if the given @compat, @type and @name strings match the
> + * properties of the given @device. A constraints can be skipped by
> + * passing NULL or an empty string as the constraint.
> + *
> + * Returns 0 for no match, and a positive integer on match. The return
> + * value is a relative score with larger values indicating better
> + * matches. The score is weighted for the most specific compatible value
> + * to get the highest score. Matching type is next, followed by matching
> + * name. Practically speaking, this results in the following priority
> + * order for matches:
> + *
> + * 1. specific compatible && type && name
> + * 2. specific compatible && type
> + * 3. specific compatible && name
> + * 4. specific compatible
> + * 5. general compatible && type && name
> + * 6. general compatible && type
> + * 7. general compatible && name
> + * 8. general compatible
> + * 9. type && name
> + * 10. type
> + * 11. name
> */
> static int __of_device_is_compatible(const struct device_node *device,
> - const char *compat)
> + const char *compat, const char *type, const char *name)
> {
> const char* cp;
> - int cplen, l;
> + int cplen, l, index, score = 0;
>
> - cp = __of_get_property(device, "compatible", &cplen);
> - if (cp == NULL)
> - return 0;
> - while (cplen > 0) {
> - if (of_compat_cmp(cp, compat, strlen(compat)) == 0)
> - return 1;
> - l = strlen(cp) + 1;
> - cp += l;
> - cplen -= l;
> + /* Compatible match has highest priority */
> + if (compat && compat[0]) {
> + cp = __of_get_property(device, "compatible", &cplen);
> + if (!cp)
> + return 0;
> + for (index = 0; cplen > 0; index++, cp += l, cplen -= l) {
> + l = strlen(cp) + 1;
This could use of_property_for_each_string.
> + if (of_compat_cmp(cp, compat, strlen(compat)) == 0) {
> + score = INT_MAX/2 - (index << 2);
> + break;
> + }
> + }
> + if (!score)
> + return 0;
> }
>
> - return 0;
> + /* Matching type is better than matching name */
> + if (type && type[0]) {
> + if (!device->type || of_node_cmp(type, device->type))
> + return 0;
> + score += 2;
> + }
> +
> + /* Matching name is a bit better than not */
> + if (name && name[0]) {
> + if (!device->name || of_node_cmp(name, device->name))
> + return 0;
> + score++;
> + }
> +
> + return score;
> }
>
> /** Checks if the given "compat" string matches one of the strings in
> @@ -375,7 +421,7 @@ int of_device_is_compatible(const struct device_node *device,
> int res;
>
> raw_spin_lock_irqsave(&devtree_lock, flags);
> - res = __of_device_is_compatible(device, compat);
> + res = __of_device_is_compatible(device, compat, NULL, NULL);
> raw_spin_unlock_irqrestore(&devtree_lock, flags);
> return res;
> }
> @@ -681,10 +727,7 @@ struct device_node *of_find_compatible_node(struct device_node *from,
> raw_spin_lock_irqsave(&devtree_lock, flags);
> np = from ? from->allnext : of_allnodes;
> for (; np; np = np->allnext) {
> - if (type
> - && !(np->type && (of_node_cmp(np->type, type) == 0)))
> - continue;
> - if (__of_device_is_compatible(np, compatible) &&
> + if (__of_device_is_compatible(np, compatible, type, NULL) &&
> of_node_get(np))
> break;
> }
> @@ -734,25 +777,22 @@ static
> const struct of_device_id *__of_match_node(const struct of_device_id *matches,
> const struct device_node *node)
> {
> + const struct of_device_id *best_match = NULL;
> + int score, best_score = 0;
> +
> if (!matches)
> return NULL;
>
> - while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
> - int match = 1;
> - if (matches->name[0])
> - match &= node->name
> - && !strcmp(matches->name, node->name);
> - if (matches->type[0])
> - match &= node->type
> - && !strcmp(matches->type, node->type);
> - if (matches->compatible[0])
> - match &= __of_device_is_compatible(node,
> - matches->compatible);
> - if (match)
> - return matches;
> - matches++;
> + for (; matches->name[0] || matches->type[0] || matches->compatible[0]; matches++) {
> + score = __of_device_is_compatible(node, matches->compatible,
> + matches->type, matches->name);
> + if (score > best_score) {
> + best_match = matches;
> + best_score = score;
> + }
> }
> - return NULL;
> +
> + return best_match;
> }
>
> /**
> --
> 1.8.3.2
>
^ permalink raw reply
* Re: [PATCH v6 06/18] ahci-platform: Add enable_ / disable_resources helper functions
From: Tejun Heo @ 2014-02-19 14:55 UTC (permalink / raw)
To: Hans de Goede
Cc: Maxime Ripard, Oliver Schinagl, Richard Zhu, Roger Quadros,
Lee Jones, linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
In-Reply-To: <1392811320-3132-7-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On Wed, Feb 19, 2014 at 01:01:48PM +0100, Hans de Goede wrote:
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
> drivers/ata/ahci_platform.c | 83 ++++++++++++++++++++++++-------------------
> include/linux/ahci_platform.h | 2 ++
> 2 files changed, 48 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 2f319e9..1cce7a2 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -117,6 +117,39 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
> EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
>
>
> +int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
> +{
> + int rc;
> +
> + if (hpriv->target_pwr) {
> + rc = regulator_enable(hpriv->target_pwr);
> + if (rc)
> + return rc;
> + }
> +
> + rc = ahci_platform_enable_clks(hpriv);
> + if (rc)
> + goto disable_regulator;
> +
> + return 0;
> +
> +disable_regulator:
> + if (hpriv->target_pwr)
> + regulator_disable(hpriv->target_pwr);
> + return rc;
> +}
> +EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
> +
> +void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
> +{
> + ahci_platform_disable_clks(hpriv);
> +
> + if (hpriv->target_pwr)
> + regulator_disable(hpriv->target_pwr);
> +}
> +EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
> +
> +
Ditto with comments, double blank lines and devres wrapping.
Thanks.
--
tejun
^ permalink raw reply
* Re: [PATCH v4 1/7] Documentation: Add device tree bindings for Freescale i.MX GPC
From: Arnd Bergmann @ 2014-02-19 14:56 UTC (permalink / raw)
To: Tomasz Figa
Cc: Mark Rutland, devicetree, Kukjin Kim, kernel, Kyungmin Park,
Rob Herring, Thomas Abraham, Philipp Zabel, Shawn Guo,
linux-arm-kernel
In-Reply-To: <5304C4E9.6090505@samsung.com>
On Wednesday 19 February 2014 15:51:21 Tomasz Figa wrote:
>
> Just wanted to share a link with you.
>
> http://www.spinics.net/lists/devicetree/msg18051.html
Excellent, thanks for the heads-up.
Philipp, please review that patch and see if you can build on top of that
for your work.
Arnd
^ permalink raw reply
* [PATCH RESEND v10 0/7] mmc: omap_hsmmc: pbias dt and cleanup
From: Balaji T K @ 2014-02-19 14:56 UTC (permalink / raw)
To: linux-omap, bcousson, devicetree, linux-mmc, chris, tony
Cc: broonie, Balaji T K
In-Reply-To: <1389627375-9107-1-git-send-email-balajitk@ti.com>
Few cleanups to reduce code indent,
Add pbias_regulator support and adapt omap_hsmmc to use pbias regulator
to configure required voltage on mmc1 pad(SD card) i/o rails on OMAP SoCs.
Balaji T K (7):
mmc: omap_hsmmc: use devm_regulator API
mmc: omap_hsmmc: handle vcc and vcc_aux independently
regulator: add pbias regulator support
mmc: omap_hsmmc: adapt hsmmc to use pbias regulator
ARM: dts: add pbias dt node
ARM: OMAP: enable SYSCON and REGULATOR_PBIAS in omap2plus_defconfig
mmc: omap_hsmmc: remove pbias workaround
.../bindings/regulator/pbias-regulator.txt | 27 ++
arch/arm/boot/dts/dra7.dtsi | 17 ++
arch/arm/boot/dts/omap2430.dtsi | 17 ++
arch/arm/boot/dts/omap3.dtsi | 17 ++
arch/arm/boot/dts/omap4.dtsi | 17 ++
arch/arm/boot/dts/omap5.dtsi | 17 ++
arch/arm/configs/omap2plus_defconfig | 2 +
drivers/mmc/host/omap_hsmmc.c | 111 +++++----
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pbias-regulator.c | 255 ++++++++++++++++++++
11 files changed, 441 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/pbias-regulator.txt
create mode 100644 drivers/regulator/pbias-regulator.c
--
1.7.5.4
^ permalink raw reply
* [PATCH RESEND v11 1/7] mmc: omap_hsmmc: use devm_regulator API
From: Balaji T K @ 2014-02-19 14:56 UTC (permalink / raw)
To: linux-omap, bcousson, devicetree, linux-mmc, chris, tony
Cc: broonie, Balaji T K
In-Reply-To: <1392821801-29673-1-git-send-email-balajitk@ti.com>
Use devm_regulator API, while at it use
devm_regulator_get_optional for optional vmmc_aux supply
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
drivers/mmc/host/omap_hsmmc.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index dbd32ad..1eb4350 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -316,7 +316,7 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
struct regulator *reg;
int ocr_value = 0;
- reg = regulator_get(host->dev, "vmmc");
+ reg = devm_regulator_get(host->dev, "vmmc");
if (IS_ERR(reg)) {
dev_err(host->dev, "vmmc regulator missing\n");
return PTR_ERR(reg);
@@ -336,7 +336,7 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
}
/* Allow an aux regulator */
- reg = regulator_get(host->dev, "vmmc_aux");
+ reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
host->vcc_aux = IS_ERR(reg) ? NULL : reg;
/* For eMMC do not power off when not in sleep state */
@@ -366,8 +366,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
{
- regulator_put(host->vcc);
- regulator_put(host->vcc_aux);
mmc_slot(host).set_power = NULL;
}
--
1.7.5.4
^ permalink raw reply related
* [PATCH RESEND v11 2/7] mmc: omap_hsmmc: handle vcc and vcc_aux independently
From: Balaji T K @ 2014-02-19 14:56 UTC (permalink / raw)
To: linux-omap, bcousson, devicetree, linux-mmc, chris, tony
Cc: broonie, Balaji T K
In-Reply-To: <1392821801-29673-1-git-send-email-balajitk@ti.com>
handle vcc and vcc_aux independently to reduce indent.
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
drivers/mmc/host/omap_hsmmc.c | 54 +++++++++++++++++++----------------------
1 files changed, 25 insertions(+), 29 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 1eb4350..342be25 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -286,11 +286,12 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
- ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
+ if (host->vcc)
+ ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
/* Enable interface voltage rail, if needed */
if (ret == 0 && host->vcc_aux) {
ret = regulator_enable(host->vcc_aux);
- if (ret < 0)
+ if (ret < 0 && host->vcc)
ret = mmc_regulator_set_ocr(host->mmc,
host->vcc, 0);
}
@@ -298,7 +299,7 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
/* Shut down the rail */
if (host->vcc_aux)
ret = regulator_disable(host->vcc_aux);
- if (!ret) {
+ if (host->vcc) {
/* Then proceed to shut down the local regulator */
ret = mmc_regulator_set_ocr(host->mmc,
host->vcc, 0);
@@ -318,10 +319,10 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
reg = devm_regulator_get(host->dev, "vmmc");
if (IS_ERR(reg)) {
- dev_err(host->dev, "vmmc regulator missing\n");
+ dev_err(host->dev, "unable to get vmmc regulator %ld\n",
+ PTR_ERR(reg));
return PTR_ERR(reg);
} else {
- mmc_slot(host).set_power = omap_hsmmc_set_power;
host->vcc = reg;
ocr_value = mmc_regulator_get_ocrmask(reg);
if (!mmc_slot(host).ocr_mask) {
@@ -334,31 +335,26 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
return -EINVAL;
}
}
+ }
+ mmc_slot(host).set_power = omap_hsmmc_set_power;
- /* Allow an aux regulator */
- reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
- host->vcc_aux = IS_ERR(reg) ? NULL : reg;
+ /* Allow an aux regulator */
+ reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
+ host->vcc_aux = IS_ERR(reg) ? NULL : reg;
- /* For eMMC do not power off when not in sleep state */
- if (mmc_slot(host).no_regulator_off_init)
- return 0;
- /*
- * UGLY HACK: workaround regulator framework bugs.
- * When the bootloader leaves a supply active, it's
- * initialized with zero usecount ... and we can't
- * disable it without first enabling it. Until the
- * framework is fixed, we need a workaround like this
- * (which is safe for MMC, but not in general).
- */
- if (regulator_is_enabled(host->vcc) > 0 ||
- (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
- int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+ /* For eMMC do not power off when not in sleep state */
+ if (mmc_slot(host).no_regulator_off_init)
+ return 0;
+ /*
+ * To disable boot_on regulator, enable regulator
+ * to increase usecount and then disable it.
+ */
+ if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
+ (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
+ int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 1, vdd);
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 0, 0);
- }
+ mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+ mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
}
return 0;
--
1.7.5.4
^ permalink raw reply related
* [PATCH RESEND v11 3/7] regulator: add pbias regulator support
From: Balaji T K @ 2014-02-19 14:56 UTC (permalink / raw)
To: linux-omap, bcousson, devicetree, linux-mmc, chris, tony
Cc: broonie, Balaji T K
In-Reply-To: <1392821801-29673-1-git-send-email-balajitk@ti.com>
pbias register controls internal power supply to sd card i/o pads
in most OMAPs (OMAP2-5, DRA7).
Control bits for selecting voltage level and
enabling/disabling are in the same PBIAS register.
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Mark Brown <broonie@linaro.org>
---
.../bindings/regulator/pbias-regulator.txt | 27 ++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pbias-regulator.c | 255 ++++++++++++++++++++
4 files changed, 292 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/pbias-regulator.txt
create mode 100644 drivers/regulator/pbias-regulator.c
diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
new file mode 100644
index 0000000..32aa26f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
@@ -0,0 +1,27 @@
+PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+ - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7.
+- reg: pbias register offset from syscon base and size of pbias register.
+- syscon : phandle of the system control module
+- regulator-name : should be
+ pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs
+ pbias_sim_omap3 for OMAP3 SoCs
+ pbias_mmc_omap4 for OMAP4 SoCs
+ pbias_mmc_omap5 for OMAP5 and DRA7 SoC
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0 0x4>;
+ syscon = <&omap5_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6a79328..58f08d1 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -384,6 +384,15 @@ config REGULATOR_PALMAS
on the muxing. This is handled automatically in the driver by
reading the mux info from OTP.
+config REGULATOR_PBIAS
+ tristate "PBIAS OMAP regulator driver"
+ depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
+ help
+ Say y here to support pbias regulator for mmc1:SD card i/o
+ on OMAP SoCs.
+ This driver provides support for OMAP pbias modelled
+ regulators.
+
config REGULATOR_PCAP
tristate "Motorola PCAP2 regulator driver"
depends on EZX_PCAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 979f9dd..001712e 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
+obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c
new file mode 100644
index 0000000..ded3b35
--- /dev/null
+++ b/drivers/regulator/pbias-regulator.c
@@ -0,0 +1,255 @@
+/*
+ * pbias-regulator.c
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Balaji T K <balajitk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct pbias_reg_info {
+ u32 enable;
+ u32 enable_mask;
+ u32 vmode;
+ unsigned int enable_time;
+ char *name;
+};
+
+struct pbias_regulator_data {
+ struct regulator_desc desc;
+ void __iomem *pbias_addr;
+ unsigned int pbias_reg;
+ struct regulator_dev *dev;
+ struct regmap *syscon;
+ const struct pbias_reg_info *info;
+ int voltage;
+};
+
+static int pbias_regulator_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV, unsigned *selector)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(dev);
+ const struct pbias_reg_info *info = data->info;
+ int ret, vmode;
+
+ if (min_uV <= 1800000)
+ vmode = 0;
+ else if (min_uV > 1800000)
+ vmode = info->vmode;
+
+ ret = regmap_update_bits(data->syscon, data->pbias_reg,
+ info->vmode, vmode);
+
+ return ret;
+}
+
+static int pbias_regulator_get_voltage(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int value, voltage;
+
+ regmap_read(data->syscon, data->pbias_reg, &value);
+ value &= info->vmode;
+
+ voltage = value ? 3000000 : 1800000;
+
+ return voltage;
+}
+
+static int pbias_regulator_enable(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int ret;
+
+ ret = regmap_update_bits(data->syscon, data->pbias_reg,
+ info->enable_mask, info->enable);
+
+ return ret;
+}
+
+static int pbias_regulator_disable(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int ret;
+
+ ret = regmap_update_bits(data->syscon, data->pbias_reg,
+ info->enable_mask, 0);
+ return ret;
+}
+
+static int pbias_regulator_is_enable(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int value;
+
+ regmap_read(data->syscon, data->pbias_reg, &value);
+
+ return (value & info->enable_mask) == info->enable_mask;
+}
+
+static struct regulator_ops pbias_regulator_voltage_ops = {
+ .set_voltage = pbias_regulator_set_voltage,
+ .get_voltage = pbias_regulator_get_voltage,
+ .enable = pbias_regulator_enable,
+ .disable = pbias_regulator_disable,
+ .is_enabled = pbias_regulator_is_enable,
+};
+
+static const struct pbias_reg_info pbias_mmc_omap2430 = {
+ .enable = BIT(1),
+ .enable_mask = BIT(1),
+ .vmode = BIT(0),
+ .enable_time = 100,
+ .name = "pbias_mmc_omap2430"
+};
+
+static const struct pbias_reg_info pbias_sim_omap3 = {
+ .enable = BIT(9),
+ .enable_mask = BIT(9),
+ .vmode = BIT(8),
+ .enable_time = 100,
+ .name = "pbias_sim_omap3"
+};
+
+static const struct pbias_reg_info pbias_mmc_omap4 = {
+ .enable = BIT(26) | BIT(22),
+ .enable_mask = BIT(26) | BIT(25) | BIT(22),
+ .vmode = BIT(21),
+ .enable_time = 100,
+ .name = "pbias_mmc_omap4"
+};
+
+static const struct pbias_reg_info pbias_mmc_omap5 = {
+ .enable = BIT(27) | BIT(26),
+ .enable_mask = BIT(27) | BIT(25) | BIT(26),
+ .vmode = BIT(21),
+ .enable_time = 100,
+ .name = "pbias_mmc_omap5"
+};
+
+static struct of_regulator_match pbias_matches[] = {
+ { .name = "pbias_mmc_omap2430", .driver_data = (void *)&pbias_mmc_omap2430},
+ { .name = "pbias_sim_omap3", .driver_data = (void *)&pbias_sim_omap3},
+ { .name = "pbias_mmc_omap4", .driver_data = (void *)&pbias_mmc_omap4},
+ { .name = "pbias_mmc_omap5", .driver_data = (void *)&pbias_mmc_omap5},
+};
+#define PBIAS_NUM_REGS ARRAY_SIZE(pbias_matches)
+
+static const struct of_device_id pbias_of_match[] = {
+ { .compatible = "ti,pbias-omap", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pbias_of_match);
+
+static int pbias_regulator_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct pbias_regulator_data *drvdata;
+ struct resource *res;
+ struct regulator_config cfg = { };
+ struct regmap *syscon;
+ const struct pbias_reg_info *info;
+ int ret = 0;
+ int count, idx, data_idx = 0;
+
+ count = of_regulator_match(&pdev->dev, np, pbias_matches,
+ PBIAS_NUM_REGS);
+ if (count < 0)
+ return count;
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data)
+ * count, GFP_KERNEL);
+ if (drvdata == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate device data\n");
+ return -ENOMEM;
+ }
+
+ syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(syscon))
+ return PTR_ERR(syscon);
+
+ cfg.dev = &pdev->dev;
+
+ for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) {
+ if (!pbias_matches[idx].init_data ||
+ !pbias_matches[idx].of_node)
+ continue;
+
+ info = pbias_matches[idx].driver_data;
+ if (!info)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ drvdata[data_idx].pbias_reg = res->start;
+ drvdata[data_idx].syscon = syscon;
+ drvdata[data_idx].info = info;
+ drvdata[data_idx].desc.name = info->name;
+ drvdata[data_idx].desc.owner = THIS_MODULE;
+ drvdata[data_idx].desc.type = REGULATOR_VOLTAGE;
+ drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops;
+ drvdata[data_idx].desc.n_voltages = 2;
+ drvdata[data_idx].desc.enable_time = info->enable_time;
+
+ cfg.init_data = pbias_matches[idx].init_data;
+ cfg.driver_data = &drvdata[data_idx];
+ cfg.of_node = pbias_matches[idx].of_node;
+
+ drvdata[data_idx].dev = devm_regulator_register(&pdev->dev,
+ &drvdata[data_idx].desc, &cfg);
+ if (IS_ERR(drvdata[data_idx].dev)) {
+ ret = PTR_ERR(drvdata[data_idx].dev);
+ dev_err(&pdev->dev,
+ "Failed to register regulator: %d\n", ret);
+ goto err_regulator;
+ }
+ data_idx++;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+err_regulator:
+ return ret;
+}
+
+static struct platform_driver pbias_regulator_driver = {
+ .probe = pbias_regulator_probe,
+ .driver = {
+ .name = "pbias-regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pbias_of_match),
+ },
+};
+
+module_platform_driver(pbias_regulator_driver);
+
+MODULE_AUTHOR("Balaji T K <balajitk@ti.com>");
+MODULE_DESCRIPTION("pbias voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pbias-regulator");
--
1.7.5.4
^ permalink raw reply related
* [PATCH RESEND v11 4/7] mmc: omap_hsmmc: adapt hsmmc to use pbias regulator
From: Balaji T K @ 2014-02-19 14:56 UTC (permalink / raw)
To: linux-omap, bcousson, devicetree, linux-mmc, chris, tony
Cc: broonie, Balaji T K
In-Reply-To: <1392821801-29673-1-git-send-email-balajitk@ti.com>
In DT case, PBAIS registers are programmed via regulator,
use regulator APIs to control PBIAS.
Signed-off-by: Balaji T K <balajitk@ti.com>
---
drivers/mmc/host/omap_hsmmc.c | 37 +++++++++++++++++++++++++++++++++++++
1 files changed, 37 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 342be25..2287bda 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -126,6 +126,10 @@
#define OMAP_MMC_MAX_CLOCK 52000000
#define DRIVER_NAME "omap_hsmmc"
+#define VDD_1V8 1800000 /* 180000 uV */
+#define VDD_3V0 3000000 /* 300000 uV */
+#define VDD_165_195 (ffs(MMC_VDD_165_195) - 1)
+
/*
* One controller can have multiple slots, like on some omap boards using
* omap.c controller driver. Luckily this is not currently done on any known
@@ -164,6 +168,8 @@ struct omap_hsmmc_host {
*/
struct regulator *vcc;
struct regulator *vcc_aux;
+ struct regulator *pbias;
+ bool pbias_enabled;
int pbias_disable;
void __iomem *base;
resource_size_t mapbase;
@@ -272,6 +278,15 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
if (mmc_slot(host).before_set_reg)
mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
+ if (host->pbias) {
+ if (host->pbias_enabled == 1) {
+ ret = regulator_disable(host->pbias);
+ if (!ret)
+ host->pbias_enabled = 0;
+ }
+ regulator_set_voltage(host->pbias, VDD_3V0, VDD_3V0);
+ }
+
/*
* Assume Vcc regulator is used only to power the card ... OMAP
* VDDS is used to power the pins, optionally with a transceiver to
@@ -306,9 +321,27 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
}
}
+ if (host->pbias) {
+ if (vdd <= VDD_165_195)
+ ret = regulator_set_voltage(host->pbias, VDD_1V8,
+ VDD_1V8);
+ else
+ ret = regulator_set_voltage(host->pbias, VDD_3V0,
+ VDD_3V0);
+ if (ret < 0)
+ goto error_set_power;
+
+ if (host->pbias_enabled == 0) {
+ ret = regulator_enable(host->pbias);
+ if (!ret)
+ host->pbias_enabled = 1;
+ }
+ }
+
if (mmc_slot(host).after_set_reg)
mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
+error_set_power:
return ret;
}
@@ -342,6 +375,9 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
host->vcc_aux = IS_ERR(reg) ? NULL : reg;
+ reg = devm_regulator_get_optional(host->dev, "pbias");
+ host->pbias = IS_ERR(reg) ? NULL : reg;
+
/* For eMMC do not power off when not in sleep state */
if (mmc_slot(host).no_regulator_off_init)
return 0;
@@ -1808,6 +1844,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
host->base = ioremap(host->mapbase, SZ_4K);
host->power_mode = MMC_POWER_OFF;
host->next_data.cookie = 1;
+ host->pbias_enabled = 0;
platform_set_drvdata(pdev, host);
--
1.7.5.4
^ permalink raw reply related
* [PATCH RESEND v11 5/7] ARM: dts: add pbias dt node
From: Balaji T K @ 2014-02-19 14:56 UTC (permalink / raw)
To: linux-omap, bcousson, devicetree, linux-mmc, chris, tony
Cc: broonie, Balaji T K
In-Reply-To: <1392821801-29673-1-git-send-email-balajitk@ti.com>
Add pbias regulator node as a child of system control
module - syscon.
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/dra7.dtsi | 17 +++++++++++++++++
arch/arm/boot/dts/omap2430.dtsi | 17 +++++++++++++++++
arch/arm/boot/dts/omap3.dtsi | 17 +++++++++++++++++
arch/arm/boot/dts/omap4.dtsi | 17 +++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 17 +++++++++++++++++
5 files changed, 85 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 1fd75aa..63750d9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -149,6 +149,22 @@
ti,hwmods = "counter_32k";
};
+ dra7_ctrl_general: tisyscon@4a002e00 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x4a002e00 0x7c>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0 0x4>;
+ syscon = <&dra7_ctrl_general>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
dra7_pmx_core: pinmux@4a003400 {
compatible = "pinctrl-single";
reg = <0x4a003400 0x0464>;
@@ -524,6 +540,7 @@
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
status = "disabled";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index d624345..af71eb0 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -29,6 +29,22 @@
pinctrl-single,function-mask = <0x3f>;
};
+ omap2_scm_general: tisyscon@49002270 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x49002270 0x240>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x230 0x4>;
+ syscon = <&omap2_scm_general>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
gpio1: gpio@4900c000 {
compatible = "ti,omap2-gpio";
reg = <0x4900c000 0x200>;
@@ -183,6 +199,7 @@
ti,dual-volt;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index a5fc83b..3726a64 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -176,6 +176,22 @@
pinctrl-single,function-mask = <0xff1f>;
};
+ omap3_scm_general: tisyscon@48002270 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x48002270 0x2f0>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x2b0 0x4>;
+ syscon = <&omap3_scm_general>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
reg = <0x48310000 0x200>;
@@ -390,6 +406,7 @@
ti,dual-volt;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index d3f8a6e..8e79064 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -186,6 +186,22 @@
pinctrl-single,function-mask = <0x7fff>;
};
+ omap4_padconf_global: tisyscon@4a1005a0 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x4a1005a0 0x170>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap4_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap4 {
+ regulator-name = "pbias_mmc_omap4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
@@ -419,6 +435,7 @@
ti,needs-special-reset;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a72813a..1f328ad 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -192,6 +192,22 @@
pinctrl-single,function-mask = <0x7fff>;
};
+ omap5_padconf_global: tisyscon@4a002da0 {
+ compatible = "syscon";
+ reg = <0x4A002da0 0xec>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap5_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
@@ -471,6 +487,7 @@
ti,needs-special-reset;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
--
1.7.5.4
^ permalink raw reply related
* [PATCH RESEND v11 6/7] ARM: OMAP: enable SYSCON and REGULATOR_PBIAS in omap2plus_defconfig
From: Balaji T K @ 2014-02-19 14:56 UTC (permalink / raw)
To: linux-omap, bcousson, devicetree, linux-mmc, chris, tony
Cc: broonie, Balaji T K
In-Reply-To: <1392821801-29673-1-git-send-email-balajitk@ti.com>
Enable REGULATOR_PBIAS needed for SD card on most OMAPs.
Signed-off-by: Balaji T K <balajitk@ti.com>
---
arch/arm/configs/omap2plus_defconfig | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 3a0b53d..e4fec1c 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -169,6 +169,7 @@ CONFIG_DRA752_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
@@ -180,6 +181,7 @@ CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_PBIAS=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
--
1.7.5.4
^ permalink raw reply related
* [PATCH RESEND v11 7/7] mmc: omap_hsmmc: remove pbias workaround
From: Balaji T K @ 2014-02-19 14:56 UTC (permalink / raw)
To: linux-omap, bcousson, devicetree, linux-mmc, chris, tony
Cc: broonie, Balaji T K
In-Reply-To: <1392821801-29673-1-git-send-email-balajitk@ti.com>
remove pbias workaround
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
drivers/mmc/host/omap_hsmmc.c | 20 +-------------------
1 files changed, 1 insertions(+), 19 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 2287bda..014bfe5 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -170,7 +170,6 @@ struct omap_hsmmc_host {
struct regulator *vcc_aux;
struct regulator *pbias;
bool pbias_enabled;
- int pbias_disable;
void __iomem *base;
resource_size_t mapbase;
spinlock_t irq_lock; /* Prevent races with irq handler */
@@ -267,13 +266,6 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
*/
if (!host->vcc)
return 0;
- /*
- * With DT, never turn OFF the regulator for MMC1. This is because
- * the pbias cell programming support is still missing when
- * booting with Device tree
- */
- if (host->pbias_disable && !vdd)
- return 0;
if (mmc_slot(host).before_set_reg)
mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
@@ -1539,13 +1531,7 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
* of external transceiver; but they all handle 1.8V.
*/
if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
- (ios->vdd == DUAL_VOLT_OCR_BIT) &&
- /*
- * With pbias cell programming missing, this
- * can't be allowed on MMC1 when booting with device
- * tree.
- */
- !host->pbias_disable) {
+ (ios->vdd == DUAL_VOLT_OCR_BIT)) {
/*
* The mmc_select_voltage fn of the core does
* not seem to set the power_mode to
@@ -1878,10 +1864,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
omap_hsmmc_context_save(host);
- /* This can be removed once we support PBIAS with DT */
- if (host->dev->of_node && res->start == 0x4809c000)
- host->pbias_disable = 1;
-
host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
/*
* MMC can still work without debounce clock.
--
1.7.5.4
^ permalink raw reply related
* Re: [PATCH v2 0/3] usb: chipidea: msm: Clean and fix glue layer driver
From: Ivan T. Ivanov @ 2014-02-19 14:58 UTC (permalink / raw)
To: Tim Bird
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Rob Landley, Peter Chen, Grant Likely, Greg Kroah-Hartman,
David Brown, devicetree@vger.kernel.org,
Linux Kernel Mailing List, linux-usb, linux-arm-msm
In-Reply-To: <CA+bK7J7D1bgehNMaMtWWggZ5KDBfZ8LK0bEYUARmc8OD3wa89Q@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2895 bytes --]
Hi Tim,
On Tue, 2014-02-18 at 22:21 -0800, Tim Bird wrote:
> Ivan,
>
> I'm having tremendous problems getting this driver to initialize. For
> some reason, I can't get the driver to actually transition the
> hardware into peripheral mode. At first I was getting a lot of probe
> deferrals, based on not finding the regulators early enough in the
> boot, and I thought it was an issue with the gadget drivers loading
> before the driver could complete its setup. However, I switched
> everything to loading via modules, and now have less probe deferrals,
> but I still can't get the driver to activate.
My understanding for gadget drivers is that you can have only one
of them active in particular time. When compiled in kernel you can
chose only one of them, also you can have only one module (function)
loaded.
> I see zero interrupts.
Right, I think that we will not see interrupts until we have
SPMI drivers which could control PMIC chip, PMIC is responsible
to do ID line detection and generate IRQ to APQ/MSM chip.
> In particular the routine hw_device_state (which turns on interrupts
> in the controller) is never called, because I can't get
> msm_otg_start_peripheral to actually kick the hardware.
>
OTG state machine is not used at all. This phy-"otg" driver is
working only in "peripheral" mode, because of missing PMIC
communication.
The only callback which you could see to be executed is
struct usb_otg::set_peripheral(), when you load gadget driver.
<snip>
(Would you mind sharing your config?).
Sure. Attached.
> I tried configuring the qcom,otg-control for user controlled mode
> setting (via debugfs),
Never testes this. It was there before.
>
> My kernel is based on an internal Sony 3.13-rc6 kernel with clock and
> regulator patches applied, as well as your phy-msm-usb.c patches from
> November and your chipidea patches from yesterday.
You will need also 4th chipidea patch[1]. I have dropped it, because
I will like to upstream PHY driver changes first. They are depended
anyway.
To reduce dependency to other drivers, I could recommend you to
use Zero gadget driver. It should be enough to test USB stack,
where APQ device will be peripheral and development workstation
will be a host[2].
# cat zero.sh
#!/bin/sh
cd /lib/modules/$(uname -r)/kernel/drivers/usb/gadget
insmod ./libcomposite.ko
insmod ./usb_f_ss_lb.ko
insmod ./g_zero.ko
> [ 22.454287] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
> [<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
> [ 22.463060] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
> [<bf005024>] (msm_otg_probe+0x24/0x904 [phy_msm_usb])
> [ 22.472703] [<bf005024>] (msm_otg_probe+0x24/0x904 [phy_msm_usb])
This is know non-fatal issue. I will try to see how to fix it.
Regards,
Ivan
[1] usb: chipidea: msm: Use USB PHY API to control PHY state
[2] http://www.linux-usb.org/usbtest/
[-- Attachment #2: config-usb2 --]
[-- Type: text/plain, Size: 53561 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.14.0-rc3 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM_NODT is not set
# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
#
# Multiple platform selection
#
#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HI3xxx is not set
# CONFIG_ARCH_KEYSTONE is not set
CONFIG_ARCH_MSM=y
CONFIG_ARCH_MSM_DT=y
#
# Qualcomm MSM SoC Selection
#
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
# CONFIG_MSM_SMD_PKG3 is not set
CONFIG_MSM_SMD=y
CONFIG_MSM_SCM=y
CONFIG_MSM_TIMER=y
CONFIG_MSM_SMD_PKG4=y
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_OMAP3 is not set
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set
#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
CONFIG_SWP_EMULATE=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_NR_BANKS=8
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_643719 is not set
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_764369 is not set
# CONFIG_ARM_ERRATA_775420 is not set
# CONFIG_ARM_ERRATA_798181 is not set
# CONFIG_ARM_ERRATA_773022 is not set
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not set
CONFIG_HAVE_ARM_ARCH_TIMER=y
# CONFIG_MCPM is not set
# CONFIG_BIG_LITTLE is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_XEN is not set
#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_CMDLINE=""
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
#
# CPU Power Management
#
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
# CONFIG_DMA_SHARED_BUFFER is not set
#
# Bus devices
#
# CONFIG_ARM_CCI is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_SPMI=y
# CONFIG_PARPORT is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_NETDEVICES is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_MSM_SMD is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_ATMEL is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
CONFIG_HW_RANDOM_MSM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_MSM_SMD_PKT is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_MSM_QPNP_INT=y
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_CAPRI is not set
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_MSM8X74=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_MSM_V2=y
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_GRGPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_BCM_KONA is not set
#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_GPIO is not set
CONFIG_POWER_RESET_MSM=y
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_VEXPRESS_CONFIG is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_QPNP=y
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MSM is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_DEBUG=y
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_MSM_OTG=y
# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_ULPI is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_S3C_HSOTG is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
CONFIG_USB_ZERO=m
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
CONFIG_USB_G_HID=m
# CONFIG_USB_G_DBGP is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_SDHCI_OF_ARASAN is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_SDHCI_MSM=y
# CONFIG_MMC_DW is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI570 is not set
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_GCC_8960=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_GCC_8974=y
CONFIG_MSM_MMCC_8974=y
CONFIG_HWSPINLOCK=y
#
# Hardware Spinlock drivers
#
CONFIG_HWSPINLOCK_MSM=y
CONFIG_CLKSRC_OF=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
CONFIG_MSM_IOMMU=y
CONFIG_IOMMU_PGTABLES_L2=y
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_FMC is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_POWERCAP is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SMB2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU_DELAY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_MODULE is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARM_PTDUMP is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_UART_PL01X is not set
# CONFIG_DEBUG_UART_8250 is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_ARM_KPROBES_TEST is not set
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_OID_REGISTRY=y
# CONFIG_VIRTUALIZATION is not set
^ permalink raw reply
* Re: [PATCH v6 07/18] ahci-platform: "Library-ise" ahci_probe functionality
From: Tejun Heo @ 2014-02-19 14:58 UTC (permalink / raw)
To: Hans de Goede
Cc: Maxime Ripard, Oliver Schinagl, Richard Zhu, Roger Quadros,
Lee Jones, linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
In-Reply-To: <1392811320-3132-8-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On Wed, Feb 19, 2014 at 01:01:49PM +0100, Hans de Goede wrote:
> ahci_probe consists of 3 steps:
> 1) Get resources (get mmio, clks, regulator)
> 2) Enable resources, handled by ahci_platform_enable_resouces
> 3) The more or less standard ahci-host controller init sequence
>
> This commit refactors step 1 and 3 into separate functions, so the platform
> drivers for AHCI implementations which need a specific order in step 2,
> and / or need to do some custom register poking at some time, can re-use
> ahci-platform.c code without needing to copy and paste it.
>
> Note that ahci_platform_init_host's prototype takes the 3 non function
> members of ahci_platform_data as arguments, the idea is that drivers using
> the new exported utility functions will not use ahci_platform_data at all,
> and hopefully in the future ahci_platform_data can go away entirely.
>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Heh, the lack of comments is getting kinda impressive. :)
Thanks.
--
tejun
^ permalink raw reply
* Re: [RFC 1/1] Device Tree Schema Source format description
From: David Gibson @ 2014-02-19 15:01 UTC (permalink / raw)
To: Grant Likely
Cc: Tomasz Figa, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Benoit Cousson,
olof-nZhT3qVonbNeoWH0uzbU5w, swarren-3lzwWm7+Weoh9ZMKESR00Q,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
khilman-QSEj5FYQhm4dnm+yROfE0A, fparent-rdvid1DuHRBWk0Htik3J/w,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mark.rutland-5wv7dgnIgG8,
a.hajda-Sze3O3UU22JBDgjK7y7TUQ, s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
pawel.moll-5wv7dgnIgG8, Jon Loeliger, Chaiken, Alison
In-Reply-To: <20140128144959.8A532C40C84-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 10582 bytes --]
On Tue, Jan 28, 2014 at 02:49:59PM +0000, Grant Likely wrote:
> Some random thoughts ahead of meeting today...
>
> On Fri, 18 Oct 2013 16:57:36 +0200, Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:
> > /*
> > * schema.dtss - Sample Device Tree schema file.
> > *
> > * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> > * Author: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> > *
> > * This program is free software; you can redistribute it and/or
> > * modify it under the terms of the GNU General Public License as
> > * published by the Free Software Foundation version 2.
> > *
> > * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> > * kind, whether express or implied; without even the implied warranty
> > * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > * GNU General Public License for more details.
> > */
> >
> > /dtss-v1/;
>
> In general I'm concerned about the creation of a new language, even if
> it is based on the DTS syntax. It forces us to define grammer that by
> necessity will be simple at first just to get things working, but then
> need to be extended to handle complex stuff. I've been researching ASN.1
> and similar schema languages to see if we can adopt the structure if not
> the syntax when writing schema files.
I share your concerns. Let me know what you find in your researches.
My current guess is that a new schema language will be the right
solution in the long term. But I'd think of it more as "inspired by"
dts syntax.
> In the mean time I'm now feeling that we should go ahead with the
> C-implementation of schema checking just to make some progress and then
> migrate the logic out into separately parsed schema files when we have
> something better. The low hanging fruit of course is the core bindings.
> Interrupts, gpios, regs, clocks, common busses like spi, i2c & pci.
I agree. There's also a whole bunch of stuff we can (gradually) add
to dtc that will be useful on its own, but also more-or-less necessary
to implement a schema language.
The most obvious is richer expression support - first because schema
patterns are likely to want to use expressions, and also because I
think we'll need basically the same datastructures for tracking schema
patterns as we do for richer expressions.
> I think the most important thing to get settled now is determining how
> we trigger schema checks. For example, given a random node in the tree,
> how does the checker know to apply the interrupts and regs tests?
Right. So I think there basically need to be two ways of applying a
schema to a node. First one schema needs to be able to assert that
another applies - that covers inheritance and common patterns used in
device schemas. Second, we need a database of rules asserting that
various schemas apply based on compatible, path or other
characteristics of a node.
Possibly you could combine those two by treating the overall set of
rules as a sort of meta-schema. Not sure if that's a useful way to
think about it or not though.
> > * Special keywords:
> > *
> > * /template/
> > * Defines schema template that can be used to represent generic bindings
> > * which may be then included in device bindings by /use/ keyword.
> > * A template can take a set of required or optional parameters.
> > * Optional parameters need to have default value specified, which is
> > * used when the parameter is omited from parameters of /use/ clause.
> > *
> > * Template declaration uses following syntax:
> > * /template/ template-name {
> > * /arg/ argument-name-1; // Required argument
> > * /arg/ argument-name-2 = <1>; // Optional argument
> > * // Here follows binding specification described further
> > * // in this document.
> > * };
>
> I'm wary of the template approach. I think schemas should be schemas,
> and it should alwasy be possible for a schema to derive from any other
> schema. For instance, a device binding will pull in the interrupt
> consumer and reg core schemas. Also, a special purpose UART device
> may use a simple extension of the ns16550 binding.
I'm not entirely sure what distinction you're drawing between a
template and a schema here.
My feeling is that a schema should essentially be a bundle of
assertions about the node.
> I guess my point is that templates shouldn't be a special case. All
> bindings should be derivable, but what we do need is a mechanism to
> constrain bindings. For example, the interrupts binding would describe
> one or more interrupts in a list, but a given device may need to
> constrain a minimum of 2 interrupts. For an initial C implementation that
> could merely be a argument when invoking the binding test.
One way I've been thinking about this is for schemas to (optionally)
have several named outputs in addition to just pass/fail. e.g. the
interrupts schema as well as doing the basic validation provides a
"number-of-interrupts" output / variable. A device scheme which
implies the interrupts schema could make a further assertion about
that number-of-interrupts output.
> > * A template argument is dereferenced by its name prefixed with
> > * a dollar ($) sign. An arbitrary property specified in parsed
> > * tree can be dereferenced by its absolute or relative path or
> > * by a lookup up the tree (interrupt-parent like).
> > *
> > * /arg/
> > * Marks following property declaration as a template argument.
> > * Can be used only inside a template declaration, to declare template
> > * arguments, as described above in /template/ keyword description.
> > *
> > * /use/
> > * Instantiates binding template. Causes the specified template to be
> > * included as a part of the binding specified by current node.
> > *
> > * Syntax used to instatiate templates:
> > * /use/ template-name {
> > * // List of template arguments and their values, e.g.
> > * argument-name-1 = <int-value>;
> > * argument-name-2 = "string-value";
> > * // etc.
> > * };
>
> On the syntax, this feels very verbose. If we were to draw inspiration
> from the ASN.1 syntax, we might do somehting like this:
>
> FdtDevice ::= SET {
> interrupts FdtInterrupt (SIZE(1))
> reg FdtReg
> }
>
> FdtDevice is a type that makes use of the FdtReg and FdtInterrupt types.
>
> > *
> > * /incomplete/
> > * Tells the validator that the schema is not complete, i.e.
> > * only specified properties and subnodes should be validated,
> > * without complaining about ones not specified in the schema.
> > *
> > * Example of use:
> > * {
> > * compatible = "simple-bus";
> > * #address-cells = <1>;
> > * #size-cells = <1>;
> > *
> > * *.* { // Zero or more subnodes
> > * /incomplete/; // of unspecified contents
> > * };
> > * };
> > *
> > * /inheritable/
> > * Marks property as inheritable by subnodes of node in which
> > * it is defined. An example of such property is interrupt-parent,
> > * which, if not specified in the same node as interrupts property,
> > * is assumed to be the same as the closest interrupt-parent property
> > * found when walking up the tree.
> > *
> > * This is purely a helper construct to allow referencing to
> > * a property from inside of a DTSS, even if it is not specified
> > * in referred node explicitly.
> > *
> > * Example of use:
> > * {
> > * /inheritable/ interrupt-parent = phandle;
> > *
> > * .* {
> > * // interrupt-parent is defined for this node
> > * // implicitly, even if not specified explicitly
> > * };
> > * };
>
> Some bindings are just core, like interrupts. It would probablay be
> better to just leave those in C even when we're happy with a schema
> language.
>
> > * Binding description
> > *
> > * A binding starts with a top level node that must be described using at
> > * least one of the key node attributes specified below. The top level node
> > * can contains a set of properties and subnodes that describe the binding.
> > * They can be specified using the DTS Schema syntax, which is basically
> > * the standard DTS syntax modified to convey information about the schema,
> > * not contents.
>
> It seems to me that what you're getting at is that a binding needs to
> describe how it is matched (key attributes) and then the set of
> constraints. That is a good start, but it feels to me like the matching
> isn't very well defined yet. We need some pretty firm rules about how
> the checker know when it can apply rules, and those rules will change
> depending on where in the tree you are. For example, the cpus schema
> only is applicable under the /cpus node, and device nodes with
> compatible properties should only match on nodes that are under bus
> nodes. (there's another issue of checking for nodes placed where they
> shouldn't be, but I'll leave that aside for now).
So, I still think the right approach is to think in terms of
"patterns" that a node can match. A schema will then typically be an
assertion that if pattern A matches (usually a simple pattern matching
just 'compatible') then pattern B matches as well (a complex pattern
giving all the constraints that this type of node should satisfy)
> Also the key properties or matching criteria will not be present for
> some bindings because they are only ever directly instantiated. ie. the
> interrupts binding doesn't stand on its own, it is only ever called out
> to by another binding. (I know, you've addressed some of this above, but
> I'm working through a though process).
>
> As we talked about on the call today, if we can hammer out how the
> schemas will get selected at test time, then we can start to implement a
> hybrid approach where core stuff is implemented in C code and schema
> files can instantiate the core bindings as needed.
To start on this I think we want to do some cleanup of the current
"checks" infrastructure. Such as:
* Add a concept of relevance - rather than a single check function,
there's a "does_this_apply" function and the check is only called if
that returns true.
* Look at making prerequisite handling be handled on a per-node
rather than global basis.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply
* Re: [PATCH v6 01/19] clocksource: orion: Use atomic access for shared registers
From: Ezequiel Garcia @ 2014-02-19 15:01 UTC (permalink / raw)
To: Daniel Lezcano
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-watchdog-u79uwXL29TY76Z2rM5mHXA, Wim Van Sebroeck,
Jason Cooper, Thomas Petazzoni, Gregory Clement, Lior Amsalem,
Sebastian Hesselbarth, Andrew Lunn
In-Reply-To: <20140211094730.GG3687@localhost>
On Tue, Feb 11, 2014 at 06:47:30AM -0300, Ezequiel Garcia wrote:
> On Tue, Feb 11, 2014 at 10:11:35AM +0100, Daniel Lezcano wrote:
> > On 02/11/2014 09:30 AM, Ezequiel Garcia wrote:
> > > On Tue, Feb 11, 2014 at 01:06:43AM +0100, Daniel Lezcano wrote:
> > >> On 02/06/2014 06:20 PM, Ezequiel Garcia wrote:
> > >>> Replace the driver-specific thread-safe shared register API
> > >>> by the recently introduced atomic_io_clear_set().
> > >>>
> > >>> Cc: Daniel Lezcano <daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > >>> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> > >>> Tested-by: Willy Tarreau <w@1wt.eu>
> > >>> Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
> > >>> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
> > >>
> > >> The patch looks good for me.
> > >>
> > >> Acked-by: Daniel Lezcano <daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > >>
> > >
> > > Daniel,
> > >
> > > Jason acked this patch for you to take it. Or do you prefer that we
> > > merge it with the rest of the watchdog series?
> >
> > I can pick it, but doesn't the watchdog series depend on it ?
> >
>
> Nope. It's indepedent of it.
Daniel,
Ping? This patch is independent of the watchdog series, and there won't
be any conflicts with it, so I think it's safe for you to take it.
--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v6 00/18] ahci: library-ise ahci_platform, add sunxi driver and cleanup imx driver
From: Tejun Heo @ 2014-02-19 15:02 UTC (permalink / raw)
To: Hans de Goede
Cc: Maxime Ripard, Oliver Schinagl, Richard Zhu, Roger Quadros,
Lee Jones, linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
In-Reply-To: <1392811320-3132-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Hello,
On Wed, Feb 19, 2014 at 01:01:42PM +0100, Hans de Goede wrote:
> Here is v6 of my patchset for adding ahci-sunxi support. This has been
> tested with Allwinner A10, Allwinner A20 and Freeware imx6x SoCs, including
> suspend / resume. Note that since my last revision the ahci_imx driver has
> also grown imx53 sata support, it would be good if some-one could test that
> with this series.
Stopping review here. I really like where it's headed in general and
most review points, except for lack of devres usage, are rather
cosmetic. I'm not completely decided yet whether we can defer devres
until later or should go for it in the first round.
Thanks.
--
tejun
^ permalink raw reply
* Re: [PATCH v3 15/15] mfd: max14577: Add device tree bindings document
From: Tomasz Figa @ 2014-02-19 15:12 UTC (permalink / raw)
To: Krzysztof Kozlowski, MyungJoo Ham, Chanwoo Choi, Samuel Ortiz,
Lee Jones, Mark Brown, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Kyungmin Park,
Dmitry Eremin-Solenikov, David Woodhouse,
devicetree-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Pawel Moll,
Mark Rutland
In-Reply-To: <1392627950-26927-16-git-send-email-k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Hi,
On 17.02.2014 10:05, Krzysztof Kozlowski wrote:
> Add document describing device tree bindings for MAX14577 MFD
> drivers: MFD core, extcon, regulator and charger.
>
> Both MAX14577 and MAX77836 chipsets are documented.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Cc: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Cc: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Cc: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> ---
> Documentation/devicetree/bindings/mfd/max14577.txt | 149 ++++++++++++++++++++
> 1 file changed, 149 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
Reviewed-by: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* HI
From: Aminata Conteh @ 2014-02-19 15:13 UTC (permalink / raw)
Hello dear
My name is Aminata Conteh, am 26 years of age, and I will like to build a
relationship with you that will lead us for a better tomorrow to enable us
share many feelings with each other as soul mate because it would be my
pleasure to receive your positive respond towards my proposal through this e-
mail (aminata.conteh1-9uewiaClKEY@public.gmane.org) of acceptance with my friendship and sincerity is
the strength of a good relationship.
Yours Always,
Aminata.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v3 15/15] mfd: max14577: Add device tree bindings document
From: Tomasz Figa @ 2014-02-19 15:17 UTC (permalink / raw)
To: Krzysztof Kozlowski, MyungJoo Ham, Chanwoo Choi, Samuel Ortiz,
Lee Jones, Mark Brown, linux-kernel, linux-arm-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Kyungmin Park,
Dmitry Eremin-Solenikov, David Woodhouse, devicetree, Rob Herring,
Pawel Moll, Mark Rutland
In-Reply-To: <1392627950-26927-16-git-send-email-k.kozlowski@samsung.com>
Hi,
On 17.02.2014 10:05, Krzysztof Kozlowski wrote:
> Add document describing device tree bindings for MAX14577 MFD
> drivers: MFD core, extcon, regulator and charger.
>
> Both MAX14577 and MAX77836 chipsets are documented.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Tomasz Figa <t.figa@samsung.com>
> Cc: Marek Szyprowski <m.szyprowski@samsung.com>
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> ---
> Documentation/devicetree/bindings/mfd/max14577.txt | 149 ++++++++++++++++++++
> 1 file changed, 149 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
OK, so the "maxim,max14577" compatible string somehow showed up in the
kernel without any documentation, interesting...
Anyway:
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox