* Re: [PATCH 14/17] ASoC: add simple-graph-card document
From: Mark Brown @ 2016-11-04 20:33 UTC (permalink / raw)
To: Kuninori Morimoto
Cc: Rob Herring, Linux-ALSA, Liam Girdwood, Simon, Laurent, Guennadi,
Grant Likely, Frank Rowand, Linux-DT, Linux-Kernel
In-Reply-To: <8760o9b9xm.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 827 bytes --]
On Mon, Oct 31, 2016 at 01:19:58AM +0000, Kuninori Morimoto wrote:
> +This Simple-Graph-Card should be located as CPU driver's port[s].
> +And then, CPU driver need to probe it by itself.
This document really needs quite a bit of fleshing out but I'm not sure
that should be a blocker for the series as a whole especially given that
English is not your native language - we can build out later. I think
based on what I'm understanding here I like what I'm seeing. It'd be
good to get some confirmation from the people with more of_graph
knowledge that this is a good usage.
One thing I'm not 100% clear on here is why it has to be a CPU DAI (I'm
guessing just one of them though the above says ports as an option?)
that creates the card? Is there a concrete reason for that or is it
just being defined as good pracctice?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
^ permalink raw reply
* Applied "ASoC: sun4i-codec: Add support for A31 board level audio routing" to the asoc tree
From: Mark Brown @ 2016-11-04 20:39 UTC (permalink / raw)
To: Chen-Yu Tsai; +Cc: Maxime Ripard, Mark Brown, Liam Girdwood
In-Reply-To: <20161103075556.29018-12-wens-jdAy2FN1RRM@public.gmane.org>
The patch
ASoC: sun4i-codec: Add support for A31 board level audio routing
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 300a18d13f7eaec789e79dc45bce026e098b45da Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Date: Thu, 3 Nov 2016 15:55:53 +0800
Subject: [PATCH] ASoC: sun4i-codec: Add support for A31 board level audio
routing
The A31 SoC's codec has various inputs, outputs and microphone bias
supplies. These can be routed on the board in different ways, such as:
- HPCOM may be connected to have the headphone DC coupled.
- Microphones all use the MBIAS main microphone supply or one mic may
use the HBIAS supply, which supports headset detection and buttons.
- Line Out may be routed to an audio jack, or an onboard speaker amp
with power controls.
Add support for specifying the audio routes in the device tree.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/sound/sun4i-codec.txt | 33 ++++++++++++++++++++++
sound/soc/sunxi/sun4i-codec.c | 21 ++++++++++++--
2 files changed, 52 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index bf480e9683a3..d91a95377f49 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -22,6 +22,31 @@ Optional properties:
Required properties for the following compatibles:
- "allwinner,sun6i-a31-codec"
- resets: phandle to the reset control for this device
+- allwinner,audio-routing: A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's
+ source. Valid names include:
+
+ Audio pins on the SoC:
+ "HP"
+ "HPCOM"
+ "LINEIN"
+ "LINEOUT"
+ "MIC1"
+ "MIC2"
+ "MIC3"
+
+ Microphone biases from the SoC:
+ "HBIAS"
+ "MBIAS"
+
+ Board connectors:
+ "Headphone"
+ "Headset Mic"
+ "Line In"
+ "Line Out"
+ "Mic"
+ "Speaker"
Example:
codec: codec@01c22c00 {
@@ -45,4 +70,12 @@ codec: codec@01c22c00 {
resets = <&ccu RST_APB1_CODEC>;
dmas = <&dma 15>, <&dma 15>;
dma-names = "rx", "tx";
+ allwinner,audio-routing =
+ "Headphone", "HP",
+ "Speaker", "LINEOUT",
+ "LINEIN", "Line In",
+ "MIC1", "MBIAS",
+ "MIC1", "Mic",
+ "MIC2", "HBIAS",
+ "MIC2", "Headset Mic";
};
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index f55718fe7c5b..1934db29b2b5 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -1104,9 +1104,19 @@ static struct snd_soc_card *sun4i_codec_create_card(struct device *dev)
return card;
};
+static const struct snd_soc_dapm_widget sun6i_codec_card_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_LINE("Line In", NULL),
+ SND_SOC_DAPM_LINE("Line Out", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_MIC("Mic", NULL),
+ SND_SOC_DAPM_SPK("Speaker", sun4i_codec_spk_event),
+};
+
static struct snd_soc_card *sun6i_codec_create_card(struct device *dev)
{
struct snd_soc_card *card;
+ int ret;
card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
if (!card)
@@ -1116,8 +1126,15 @@ static struct snd_soc_card *sun6i_codec_create_card(struct device *dev)
if (!card->dai_link)
return ERR_PTR(-ENOMEM);
- card->dev = dev;
- card->name = "A31 Audio Codec";
+ card->dev = dev;
+ card->name = "A31 Audio Codec";
+ card->dapm_widgets = sun6i_codec_card_dapm_widgets;
+ card->num_dapm_widgets = ARRAY_SIZE(sun6i_codec_card_dapm_widgets);
+ card->fully_routed = true;
+
+ ret = snd_soc_of_parse_audio_routing(card, "allwinner,audio-routing");
+ if (ret)
+ dev_warn(dev, "failed to parse audio-routing: %d\n", ret);
return card;
};
--
2.10.1
^ permalink raw reply related
* Applied "ASoC: sun4i-codec: Add support for A31 analog microphone inputs" to the asoc tree
From: Mark Brown @ 2016-11-04 20:40 UTC (permalink / raw)
To: Chen-Yu Tsai; +Cc: Mark Brown, Liam Girdwood
In-Reply-To: <20161103075556.29018-10-wens-jdAy2FN1RRM@public.gmane.org>
The patch
ASoC: sun4i-codec: Add support for A31 analog microphone inputs
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From ecd5cdb4fd818b1cec55863d5de3683dad1c2f53 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Date: Thu, 3 Nov 2016 15:55:51 +0800
Subject: [PATCH] ASoC: sun4i-codec: Add support for A31 analog microphone
inputs
The A31 internal codec has 3 microphone outputs, of which MIC2 and MIC3
are muxed internally. The resulting two microphone inputs have separate
gain controls and mixer inputs.
The codec also has 2 microphone bias pins. HBIAS is specifically for the
headphone jack, which also supports headphone detection and control
buttons. These extra functions are not supported yet. The other, MBIAS,
is for all other analog microphones.
There is also mention of digital microphone support, but documentation
is scarce, and no hardware with it is available.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
sound/soc/sunxi/sun4i-codec.c | 70 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index a10251f4932e..f55718fe7c5b 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -776,6 +776,14 @@ static const struct snd_kcontrol_new sun6i_codec_mixer_controls[] = {
SUN6I_CODEC_OM_DACA_CTRL,
SUN6I_CODEC_OM_DACA_CTRL_LMIX_LINEINL,
SUN6I_CODEC_OM_DACA_CTRL_RMIX_LINEINR, 1, 0),
+ SOC_DAPM_DOUBLE("Mic1 Playback Switch",
+ SUN6I_CODEC_OM_DACA_CTRL,
+ SUN6I_CODEC_OM_DACA_CTRL_LMIX_MIC1,
+ SUN6I_CODEC_OM_DACA_CTRL_RMIX_MIC1, 1, 0),
+ SOC_DAPM_DOUBLE("Mic2 Playback Switch",
+ SUN6I_CODEC_OM_DACA_CTRL,
+ SUN6I_CODEC_OM_DACA_CTRL_LMIX_MIC2,
+ SUN6I_CODEC_OM_DACA_CTRL_RMIX_MIC2, 1, 0),
};
/* headphone controls */
@@ -794,6 +802,21 @@ static const struct snd_kcontrol_new sun6i_codec_hp_src[] = {
sun6i_codec_hp_src_enum),
};
+/* microphone controls */
+static const char * const sun6i_codec_mic2_src_enum_text[] = {
+ "Mic2", "Mic3",
+};
+
+static SOC_ENUM_SINGLE_DECL(sun6i_codec_mic2_src_enum,
+ SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_MIC2SLT,
+ sun6i_codec_mic2_src_enum_text);
+
+static const struct snd_kcontrol_new sun6i_codec_mic2_src[] = {
+ SOC_DAPM_ENUM("Mic2 Amplifier Source Route",
+ sun6i_codec_mic2_src_enum),
+};
+
/* line out controls */
static const char * const sun6i_codec_lineout_src_enum_text[] = {
"Stereo", "Mono Differential",
@@ -819,6 +842,10 @@ static const DECLARE_TLV_DB_RANGE(sun6i_codec_lineout_vol_scale,
0, 1, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 1),
2, 31, TLV_DB_SCALE_ITEM(-4350, 150, 0),
);
+static const DECLARE_TLV_DB_RANGE(sun6i_codec_mic_gain_scale,
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 7, TLV_DB_SCALE_ITEM(2400, 300, 0),
+);
static const struct snd_kcontrol_new sun6i_codec_codec_widgets[] = {
SOC_SINGLE_TLV("DAC Playback Volume", SUN4I_CODEC_DAC_DPC,
@@ -844,9 +871,42 @@ static const struct snd_kcontrol_new sun6i_codec_codec_widgets[] = {
SOC_SINGLE_TLV("Line In Playback Volume",
SUN6I_CODEC_OM_PA_CTRL, SUN6I_CODEC_OM_PA_CTRL_LINEING,
0x7, 0, sun6i_codec_out_mixer_pregain_scale),
+ SOC_SINGLE_TLV("Mic1 Playback Volume",
+ SUN6I_CODEC_OM_PA_CTRL, SUN6I_CODEC_OM_PA_CTRL_MIC1G,
+ 0x7, 0, sun6i_codec_out_mixer_pregain_scale),
+ SOC_SINGLE_TLV("Mic2 Playback Volume",
+ SUN6I_CODEC_OM_PA_CTRL, SUN6I_CODEC_OM_PA_CTRL_MIC2G,
+ 0x7, 0, sun6i_codec_out_mixer_pregain_scale),
+
+ /* Microphone Amp boost gains */
+ SOC_SINGLE_TLV("Mic1 Boost Volume", SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_MIC1BOOST, 0x7, 0,
+ sun6i_codec_mic_gain_scale),
+ SOC_SINGLE_TLV("Mic2 Boost Volume", SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_MIC2BOOST, 0x7, 0,
+ sun6i_codec_mic_gain_scale),
};
static const struct snd_soc_dapm_widget sun6i_codec_codec_dapm_widgets[] = {
+ /* Microphone inputs */
+ SND_SOC_DAPM_INPUT("MIC1"),
+ SND_SOC_DAPM_INPUT("MIC2"),
+ SND_SOC_DAPM_INPUT("MIC3"),
+
+ /* Microphone Bias */
+ SND_SOC_DAPM_SUPPLY("HBIAS", SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_HBIASEN, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("MBIAS", SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_MBIASEN, 0, NULL, 0),
+
+ /* Mic input path */
+ SND_SOC_DAPM_MUX("Mic2 Amplifier Source Route",
+ SND_SOC_NOPM, 0, 0, sun6i_codec_mic2_src),
+ SND_SOC_DAPM_PGA("Mic1 Amplifier", SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_MIC1AMPEN, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("Mic2 Amplifier", SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_MIC2AMPEN, 0, NULL, 0),
+
/* Line In */
SND_SOC_DAPM_INPUT("LINEIN"),
@@ -893,15 +953,25 @@ static const struct snd_soc_dapm_route sun6i_codec_codec_dapm_routes[] = {
{ "Left DAC", NULL, "DAC Enable" },
{ "Right DAC", NULL, "DAC Enable" },
+ /* Microphone Routes */
+ { "Mic1 Amplifier", NULL, "MIC1"},
+ { "Mic2 Amplifier Source Route", "Mic2", "MIC2" },
+ { "Mic2 Amplifier Source Route", "Mic3", "MIC3" },
+ { "Mic2 Amplifier", NULL, "Mic2 Amplifier Source Route"},
+
/* Left Mixer Routes */
{ "Left Mixer", "DAC Playback Switch", "Left DAC" },
{ "Left Mixer", "DAC Reversed Playback Switch", "Right DAC" },
{ "Left Mixer", "Line In Playback Switch", "LINEIN" },
+ { "Left Mixer", "Mic1 Playback Switch", "Mic1 Amplifier" },
+ { "Left Mixer", "Mic2 Playback Switch", "Mic2 Amplifier" },
/* Right Mixer Routes */
{ "Right Mixer", "DAC Playback Switch", "Right DAC" },
{ "Right Mixer", "DAC Reversed Playback Switch", "Left DAC" },
{ "Right Mixer", "Line In Playback Switch", "LINEIN" },
+ { "Right Mixer", "Mic1 Playback Switch", "Mic1 Amplifier" },
+ { "Right Mixer", "Mic2 Playback Switch", "Mic2 Amplifier" },
/* Headphone Routes */
{ "Headphone Source Playback Route", "DAC", "Left DAC" },
--
2.10.1
^ permalink raw reply related
* Applied "ASoC: sun4i-codec: Add support for A31 Line Out playback" to the asoc tree
From: Mark Brown @ 2016-11-04 20:40 UTC (permalink / raw)
To: Chen-Yu Tsai; +Cc: Maxime Ripard, Mark Brown, Liam Girdwood
In-Reply-To: <20161103075556.29018-9-wens@csie.org>
The patch
ASoC: sun4i-codec: Add support for A31 Line Out playback
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 0f909f98d7cbabc3641a45da9c6891444b929a92 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Thu, 3 Nov 2016 15:55:50 +0800
Subject: [PATCH] ASoC: sun4i-codec: Add support for A31 Line Out playback
The A31 integrated codec has a second "Line Out" output which does not
include an integrated amplifier in its path. This path does have a
separate volume control.
This patch adds support for the playback path from the DAC to the Line
Out pins.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/sunxi/sun4i-codec.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 72a84f76aa57..a10251f4932e 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -794,11 +794,31 @@ static const struct snd_kcontrol_new sun6i_codec_hp_src[] = {
sun6i_codec_hp_src_enum),
};
+/* line out controls */
+static const char * const sun6i_codec_lineout_src_enum_text[] = {
+ "Stereo", "Mono Differential",
+};
+
+static SOC_ENUM_DOUBLE_DECL(sun6i_codec_lineout_src_enum,
+ SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_LINEOUTLSRC,
+ SUN6I_CODEC_MIC_CTRL_LINEOUTRSRC,
+ sun6i_codec_lineout_src_enum_text);
+
+static const struct snd_kcontrol_new sun6i_codec_lineout_src[] = {
+ SOC_DAPM_ENUM("Line Out Source Playback Route",
+ sun6i_codec_lineout_src_enum),
+};
+
/* volume / mute controls */
static const DECLARE_TLV_DB_SCALE(sun6i_codec_dvol_scale, -7308, 116, 0);
static const DECLARE_TLV_DB_SCALE(sun6i_codec_hp_vol_scale, -6300, 100, 1);
static const DECLARE_TLV_DB_SCALE(sun6i_codec_out_mixer_pregain_scale,
-450, 150, 0);
+static const DECLARE_TLV_DB_RANGE(sun6i_codec_lineout_vol_scale,
+ 0, 1, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 1),
+ 2, 31, TLV_DB_SCALE_ITEM(-4350, 150, 0),
+);
static const struct snd_kcontrol_new sun6i_codec_codec_widgets[] = {
SOC_SINGLE_TLV("DAC Playback Volume", SUN4I_CODEC_DAC_DPC,
@@ -808,10 +828,18 @@ static const struct snd_kcontrol_new sun6i_codec_codec_widgets[] = {
SUN6I_CODEC_OM_DACA_CTRL,
SUN6I_CODEC_OM_DACA_CTRL_HPVOL, 0x3f, 0,
sun6i_codec_hp_vol_scale),
+ SOC_SINGLE_TLV("Line Out Playback Volume",
+ SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_LINEOUTVC, 0x1f, 0,
+ sun6i_codec_lineout_vol_scale),
SOC_DOUBLE("Headphone Playback Switch",
SUN6I_CODEC_OM_DACA_CTRL,
SUN6I_CODEC_OM_DACA_CTRL_LHPPAMUTE,
SUN6I_CODEC_OM_DACA_CTRL_RHPPAMUTE, 1, 0),
+ SOC_DOUBLE("Line Out Playback Switch",
+ SUN6I_CODEC_MIC_CTRL,
+ SUN6I_CODEC_MIC_CTRL_LINEOUTLEN,
+ SUN6I_CODEC_MIC_CTRL_LINEOUTREN, 1, 0),
/* Mixer pre-gains */
SOC_SINGLE_TLV("Line In Playback Volume",
SUN6I_CODEC_OM_PA_CTRL, SUN6I_CODEC_OM_PA_CTRL_LINEING,
@@ -853,6 +881,11 @@ static const struct snd_soc_dapm_widget sun6i_codec_codec_dapm_widgets[] = {
SND_SOC_DAPM_REG(snd_soc_dapm_supply, "HPCOM", SUN6I_CODEC_OM_PA_CTRL,
SUN6I_CODEC_OM_PA_CTRL_HPCOM_CTL, 0x3, 0x3, 0),
SND_SOC_DAPM_OUTPUT("HP"),
+
+ /* Line Out path */
+ SND_SOC_DAPM_MUX("Line Out Source Playback Route",
+ SND_SOC_NOPM, 0, 0, sun6i_codec_lineout_src),
+ SND_SOC_DAPM_OUTPUT("LINEOUT"),
};
static const struct snd_soc_dapm_route sun6i_codec_codec_dapm_routes[] = {
@@ -878,6 +911,12 @@ static const struct snd_soc_dapm_route sun6i_codec_codec_dapm_routes[] = {
{ "Headphone Amp", NULL, "Headphone Source Playback Route" },
{ "HP", NULL, "Headphone Amp" },
{ "HPCOM", NULL, "HPCOM Protection" },
+
+ /* Line Out Routes */
+ { "Line Out Source Playback Route", "Stereo", "Left Mixer" },
+ { "Line Out Source Playback Route", "Stereo", "Right Mixer" },
+ { "Line Out Source Playback Route", "Mono Differential", "Left Mixer" },
+ { "LINEOUT", NULL, "Line Out Source Playback Route" },
};
static struct snd_soc_codec_driver sun6i_codec_codec = {
--
2.10.1
^ permalink raw reply related
* Re: [PATCH v2 1/5] ARM: memory: da8xx-ddrctl: new driver
From: Kevin Hilman @ 2016-11-04 20:41 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Mark Rutland, linux-devicetree, Tomi Valkeinen, Michael Turquette,
Sekhar Nori, Russell King, linux-drm, LKML, Peter Ujfalusi,
Rob Herring, Jyri Sarha, Frank Rowand, arm-soc, Laurent Pinchart
In-Reply-To: <1477925138-23457-2-git-send-email-bgolaszewski@baylibre.com>
Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:
> Create a new driver for the da8xx DDR2/mDDR controller and implement
> support for writing to the Peripheral Bus Burst Priority Register.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH v2 2/5] ARM: bus: da8xx-mstpri: new driver
From: Kevin Hilman @ 2016-11-04 20:42 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Mark Rutland, linux-devicetree, Tomi Valkeinen, Michael Turquette,
Sekhar Nori, Russell King, linux-drm, LKML, Peter Ujfalusi,
Rob Herring, Jyri Sarha, Frank Rowand, arm-soc, Laurent Pinchart
In-Reply-To: <1477925138-23457-3-git-send-email-bgolaszewski@baylibre.com>
Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:
> Create the driver for the da8xx master peripheral priority
> configuration and implement support for writing to the three
> Master Priority registers on da850 SoCs.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH] ARM: dts: imx6: Add imx-weim parameters to dtsi's
From: Fabio Estevam @ 2016-11-04 20:48 UTC (permalink / raw)
To: Joshua Clayton
Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, Rob Herring, Mark Rutland,
Russell King,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
In-Reply-To: <1478044305-5666-1-git-send-email-stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Tue, Nov 1, 2016 at 9:51 PM, Joshua Clayton <stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> imx-weim should always set address-cells to 2,
> and size_cells to 1.
> On imx6, fsl,weim-cs-gpr will always be &gpr
>
> Set these common parameters in the dtsi file,
> rather than in a downstream dts.
>
> Signed-off-by: Joshua Clayton <stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Reviewed-by: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v5 02/23] of: device: Export of_device_{get_modalias, uvent_modalias} to modules
From: Stephen Boyd @ 2016-11-04 20:51 UTC (permalink / raw)
To: Peter Chen, robh
Cc: Chen-Yu Tsai, Felipe Balbi, Arnd Bergmann, Neil Armstrong,
linux-arm-msm, linux-usb, linux-kernel, Bjorn Andersson,
devicetree, Peter Chen, Andy Gross, linux-arm-kernel
In-Reply-To: <20161025011632.GA23876@b29397-desktop>
Quoting Peter Chen (2016-10-24 18:16:32)
> On Mon, Oct 24, 2016 at 12:48:24PM -0700, Stephen Boyd wrote:
> > Quoting Chen-Yu Tsai (2016-10-24 05:19:05)
> > > Hi,
> > >
> > > On Tue, Oct 18, 2016 at 9:56 AM, Stephen Boyd <stephen.boyd@linaro.org> wrote:
> > > > The ULPI bus can be built as a module, and it will soon be
> > > > calling these functions when it supports probing devices from DT.
> > > > Export them so they can be used by the ULPI module.
> > > >
> > > > Acked-by: Rob Herring <robh@kernel.org>
> > > > Cc: <devicetree@vger.kernel.org>
> > > > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
> > > > ---
> > > > drivers/of/device.c | 2 ++
> > > > 1 file changed, 2 insertions(+)
> > > >
> > > > diff --git a/drivers/of/device.c b/drivers/of/device.c
> > > > index 8a22a253a830..6719ab35b62e 100644
> > > > --- a/drivers/of/device.c
> > > > +++ b/drivers/of/device.c
> > > > @@ -225,6 +225,7 @@ ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len)
> > > >
> > > > return tsize;
> > > > }
> > > > +EXPORT_SYMBOL_GPL(of_device_get_modalias);
> > > >
> > > > int of_device_request_module(struct device *dev)
> > > > {
> > > > @@ -290,6 +291,7 @@ void of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
> > > > }
> > > > mutex_unlock(&of_mutex);
> > > > }
> > > > +EXPORT_SYMBOL_GPL(of_device_uevent_modalias);
> > >
> > > This is trailing the wrong function.
> > >
> >
> > Good catch. Must have been some bad rebase.
> >
> > Peter, can you fix it while applying or should I resend this patch?
> >
>
> But, this is device tree patch. I can only get chipidea part and other
> USB patches if Greg agrees.
>
Were you expecting Rob to take the drivers/of/* patches? Sorry I thought
Rob acked them so they could go through usb with the other changes.
^ permalink raw reply
* [PATCH V6 0/6] msm8992/msm8994: Google Nexus 5X/6P initial board support
From: Jeremy McNicoll @ 2016-11-04 20:56 UTC (permalink / raw)
To: linux-arm-msm, linux-soc, devicetree
Cc: robh, andy.gross, sboyd, mail, arnd, bjorn.andersson,
mark.rutland, michael.scott, jeremymc
This series provides basic support for the Nexus 5X / 6P with the goal of
getting as much of the phone running a mainline kernel. (wishful thinking...)
Ideally we will be able to leverage most / significant portion of the great
work being done by Linaro mainlining effort. A selection of various
bits 'n pieces will be leveraged and re-used. If nothing else, this provides
yet another platform to break / test / re-verify the MSM code base as it gets
mainlined.
-RFC in the subject was dropped when sending V5 so too was the V5 part as I
wasn't sure if one needs to drop the V[x] part when dropping the RFC part. ;-(
Here is V6 which based on feedback and discussion with folks at LPC it is
now ready to be merged.
V1:
[http://lists.infradead.org/pipermail/linux-arm-kernel/2016-July/442069.html]
V2:
[http://www.spinics.net/lists/linux-soc/msg01059.html]
V3:
[http://www.spinics.net/lists/linux-soc/msg01089.html]
V4:
[http://www.spinics.net/lists/linux-arm-msm/msg23849.html]
V5:
[ http://www.spinics.net/lists/devicetree/msg147476.html ]
V5->V6:
- tested on the Nexus 5X and 6P using V4 of Michael Scotts pin ctrl code.
- using V5 of the 8994 pin ctrl driver from here: https://patchwork.kernel.org/patch/9405773/
- clock controller name and compatible string updates, moved under soc
- removed clock-output-names in DTS’s
- v2 references in GCC deleted as V1 hardware never shipped therefor its
not needed
- model and compatible strings updated for both 5X and 6P
- minor label update / removal for ‘soc’
- removal of the 8994 - v2 DTS file as its the only version that has shipped.
- global clock for 8994 / 8992: format hex to lower case
As explicitly stated in V1 this is just a starting point and the plan is to
continue adding updating support for more peripherals / components. Ideally
this starting point will allow others to help in the forward porting effort.
Again, thank you everyone for your feedback thus far it is greatly appreciated.
Bastian Köcher (2):
msm8994 clocks: global clock support for msm8994 SOC.
arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support
Jeremy McNicoll (4):
arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support
dt-bindings: qcom: clocks: Add msm8994 clock bindings
dt-bindings: qcom: Add msm899(2/4) bindings
arm64: configs: enable configs for msm899(2/4) basic support
Documentation/devicetree/bindings/arm/qcom.txt | 2 +
.../devicetree/bindings/clock/qcom,gcc.txt | 1 +
arch/arm64/boot/dts/qcom/Makefile | 7 +-
.../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 41 +
arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 38 +
arch/arm64/boot/dts/qcom/msm8992.dtsi | 184 ++
.../arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 40 +
arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 38 +
arch/arm64/boot/dts/qcom/msm8994.dtsi | 216 ++
arch/arm64/configs/defconfig | 2 +
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-msm8994.c | 2301 ++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-msm8994.h | 145 ++
14 files changed, 3021 insertions(+), 2 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8992.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8994.dtsi
create mode 100644 drivers/clk/qcom/gcc-msm8994.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-msm8994.h
--
2.9.2
^ permalink raw reply
* [PATCH V6 1/6] arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support
From: Jeremy McNicoll @ 2016-11-04 20:56 UTC (permalink / raw)
To: linux-arm-msm, linux-soc, devicetree
Cc: robh, andy.gross, sboyd, mail, arnd, bjorn.andersson,
mark.rutland, michael.scott, jeremymc
In-Reply-To: <1478292996-29559-1-git-send-email-jeremymc@redhat.com>
From: Jeremy McNicoll <jmcnicol@redhat.com>
Initial device tree support for Qualcomm MSM8992 SoC and
LG Bullhead / Google Nexus 5X support.
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
---
arch/arm64/boot/dts/qcom/Makefile | 6 +-
.../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 41 +++++
arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 38 +++++
arch/arm64/boot/dts/qcom/msm8992.dtsi | 184 +++++++++++++++++++++
4 files changed, 267 insertions(+), 2 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8992.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5dd05de..439e40e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,6 +1,8 @@
-dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
new file mode 100644
index 0000000..4542133
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -0,0 +1,41 @@
+/* Copyright (c) 2015, LGE Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+
+/ {
+ model = "LG Nexus 5X";
+ compatible = "lg,bullhead", "qcom,msm8992";
+ /* required for bootloader to select correct board */
+ qcom,board-id = <0xb64 0>;
+ qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ serial@f991e000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
new file mode 100644
index 0000000..d2a26f0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+ blsp1_uart2_default: blsp1_uart2_default {
+ pinmux {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart2_sleep: blsp1_uart2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
new file mode 100644
index 0000000..44b2d37
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -0,0 +1,184 @@
+/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. MSM 8992";
+ compatible = "qcom,msm8992";
+ // msm-id needed by bootloader for selecting correct blob
+ qcom,msm-id = <251 0>, <252 0>;
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@f9000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xf9000000 0x1000>,
+ <0xf9002000 0x1000>;
+ };
+
+ timer@f9020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xf9020000 0x1000>;
+
+ frame@f9021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9021000 0x1000>,
+ <0xf9022000 0x1000>;
+ };
+
+ frame@f9023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9028000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
+
+ msmgpio: pinctrl@fd510000 {
+ compatible = "qcom,msm8994-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ blsp1_uart2: serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
+ status = "disabled";
+ clock-names = "core", "iface";
+ clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&clock_gcc GCC_BLSP1_AHB_CLK>;
+ };
+
+ clock_gcc: clock-controller@fc400000 {
+ compatible = "qcom,gcc-msm8994";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0xfc400000 0x2000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0 0>; // bootloader will update
+ };
+};
+
+
+#include "msm8992-pins.dtsi"
--
2.9.2
^ permalink raw reply related
* [PATCH V6 2/6] dt-bindings: qcom: clocks: Add msm8994 clock bindings
From: Jeremy McNicoll @ 2016-11-04 20:56 UTC (permalink / raw)
To: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: robh-DgEjT+Ai2ygdnm+yROfE0A, andy.gross-QSEj5FYQhm4dnm+yROfE0A,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ, mail-LJ92rlH3Dns, arnd-r2nGTMty4D4,
bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
michael.scott-QSEj5FYQhm4dnm+yROfE0A,
jeremymc-H+wXaHxf7aLQT0dZR+AlfA
In-Reply-To: <1478292996-29559-1-git-send-email-jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Jeremy McNicoll <jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
.../devicetree/bindings/clock/qcom,gcc.txt | 1 +
include/dt-bindings/clock/qcom,gcc-msm8994.h | 145 +++++++++++++++++++++
2 files changed, 146 insertions(+)
create mode 100644 include/dt-bindings/clock/qcom,gcc-msm8994.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 3cf4421..5b4dfc1 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -14,6 +14,7 @@ Required properties :
"qcom,gcc-msm8974"
"qcom,gcc-msm8974pro"
"qcom,gcc-msm8974pro-ac"
+ "qcom,gcc-msm8994"
"qcom,gcc-msm8996"
"qcom,gcc-mdm9615"
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8994.h b/include/dt-bindings/clock/qcom,gcc-msm8994.h
new file mode 100644
index 0000000..0ae494b
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-msm8994.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef _DT_BINDINGS_CLK_MSM_GCC_8994_H
+#define _DT_BINDINGS_CLK_MSM_GCC_8994_H
+
+#define GPLL0_EARLY 0
+#define GPLL0 1
+#define GPLL4_EARLY 2
+#define GPLL4 3
+#define UFS_AXI_CLK_SRC 4
+#define USB30_MASTER_CLK_SRC 5
+#define BLSP1_QUP1_I2C_APPS_CLK_SRC 6
+#define BLSP1_QUP1_SPI_APPS_CLK_SRC 7
+#define BLSP1_QUP2_I2C_APPS_CLK_SRC 8
+#define BLSP1_QUP2_SPI_APPS_CLK_SRC 9
+#define BLSP1_QUP3_I2C_APPS_CLK_SRC 10
+#define BLSP1_QUP3_SPI_APPS_CLK_SRC 11
+#define BLSP1_QUP4_I2C_APPS_CLK_SRC 12
+#define BLSP1_QUP4_SPI_APPS_CLK_SRC 13
+#define BLSP1_QUP5_I2C_APPS_CLK_SRC 14
+#define BLSP1_QUP5_SPI_APPS_CLK_SRC 15
+#define BLSP1_QUP6_I2C_APPS_CLK_SRC 16
+#define BLSP1_QUP6_SPI_APPS_CLK_SRC 17
+#define BLSP1_UART1_APPS_CLK_SRC 18
+#define BLSP1_UART2_APPS_CLK_SRC 19
+#define BLSP1_UART3_APPS_CLK_SRC 20
+#define BLSP1_UART4_APPS_CLK_SRC 21
+#define BLSP1_UART5_APPS_CLK_SRC 22
+#define BLSP1_UART6_APPS_CLK_SRC 23
+#define BLSP2_QUP1_I2C_APPS_CLK_SRC 24
+#define BLSP2_QUP1_SPI_APPS_CLK_SRC 25
+#define BLSP2_QUP2_I2C_APPS_CLK_SRC 26
+#define BLSP2_QUP2_SPI_APPS_CLK_SRC 27
+#define BLSP2_QUP3_I2C_APPS_CLK_SRC 28
+#define BLSP2_QUP3_SPI_APPS_CLK_SRC 29
+#define BLSP2_QUP4_I2C_APPS_CLK_SRC 30
+#define BLSP2_QUP4_SPI_APPS_CLK_SRC 31
+#define BLSP2_QUP5_I2C_APPS_CLK_SRC 32
+#define BLSP2_QUP5_SPI_APPS_CLK_SRC 33
+#define BLSP2_QUP6_I2C_APPS_CLK_SRC 34
+#define BLSP2_QUP6_SPI_APPS_CLK_SRC 35
+#define BLSP2_UART1_APPS_CLK_SRC 36
+#define BLSP2_UART2_APPS_CLK_SRC 37
+#define BLSP2_UART3_APPS_CLK_SRC 38
+#define BLSP2_UART4_APPS_CLK_SRC 39
+#define BLSP2_UART5_APPS_CLK_SRC 40
+#define BLSP2_UART6_APPS_CLK_SRC 41
+#define GP1_CLK_SRC 42
+#define GP2_CLK_SRC 43
+#define GP3_CLK_SRC 44
+#define PCIE_0_AUX_CLK_SRC 45
+#define PCIE_0_PIPE_CLK_SRC 46
+#define PCIE_1_AUX_CLK_SRC 47
+#define PCIE_1_PIPE_CLK_SRC 48
+#define PDM2_CLK_SRC 49
+#define SDCC1_APPS_CLK_SRC 50
+#define SDCC2_APPS_CLK_SRC 51
+#define SDCC3_APPS_CLK_SRC 52
+#define SDCC4_APPS_CLK_SRC 53
+#define TSIF_REF_CLK_SRC 54
+#define USB30_MOCK_UTMI_CLK_SRC 55
+#define USB3_PHY_AUX_CLK_SRC 56
+#define USB_HS_SYSTEM_CLK_SRC 57
+#define GCC_BLSP1_AHB_CLK 58
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK 59
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK 60
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK 61
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK 62
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK 63
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK 64
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK 65
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK 66
+#define GCC_BLSP1_QUP5_I2C_APPS_CLK 67
+#define GCC_BLSP1_QUP5_SPI_APPS_CLK 68
+#define GCC_BLSP1_QUP6_I2C_APPS_CLK 69
+#define GCC_BLSP1_QUP6_SPI_APPS_CLK 70
+#define GCC_BLSP1_UART1_APPS_CLK 71
+#define GCC_BLSP1_UART2_APPS_CLK 72
+#define GCC_BLSP1_UART3_APPS_CLK 73
+#define GCC_BLSP1_UART4_APPS_CLK 74
+#define GCC_BLSP1_UART5_APPS_CLK 75
+#define GCC_BLSP1_UART6_APPS_CLK 76
+#define GCC_BLSP2_AHB_CLK 77
+#define GCC_BLSP2_QUP1_I2C_APPS_CLK 78
+#define GCC_BLSP2_QUP1_SPI_APPS_CLK 79
+#define GCC_BLSP2_QUP2_I2C_APPS_CLK 80
+#define GCC_BLSP2_QUP2_SPI_APPS_CLK 81
+#define GCC_BLSP2_QUP3_I2C_APPS_CLK 82
+#define GCC_BLSP2_QUP3_SPI_APPS_CLK 83
+#define GCC_BLSP2_QUP4_I2C_APPS_CLK 84
+#define GCC_BLSP2_QUP4_SPI_APPS_CLK 85
+#define GCC_BLSP2_QUP5_I2C_APPS_CLK 86
+#define GCC_BLSP2_QUP5_SPI_APPS_CLK 87
+#define GCC_BLSP2_QUP6_I2C_APPS_CLK 88
+#define GCC_BLSP2_QUP6_SPI_APPS_CLK 89
+#define GCC_BLSP2_UART1_APPS_CLK 90
+#define GCC_BLSP2_UART2_APPS_CLK 91
+#define GCC_BLSP2_UART3_APPS_CLK 92
+#define GCC_BLSP2_UART4_APPS_CLK 93
+#define GCC_BLSP2_UART5_APPS_CLK 94
+#define GCC_BLSP2_UART6_APPS_CLK 95
+#define GCC_GP1_CLK 96
+#define GCC_GP2_CLK 97
+#define GCC_GP3_CLK 98
+#define GCC_PCIE_0_AUX_CLK 99
+#define GCC_PCIE_0_PIPE_CLK 100
+#define GCC_PCIE_1_AUX_CLK 101
+#define GCC_PCIE_1_PIPE_CLK 102
+#define GCC_PDM2_CLK 103
+#define GCC_SDCC1_APPS_CLK 104
+#define GCC_SDCC2_APPS_CLK 105
+#define GCC_SDCC3_APPS_CLK 106
+#define GCC_SDCC4_APPS_CLK 107
+#define GCC_SYS_NOC_UFS_AXI_CLK 108
+#define GCC_SYS_NOC_USB3_AXI_CLK 109
+#define GCC_TSIF_REF_CLK 110
+#define GCC_UFS_AXI_CLK 111
+#define GCC_UFS_RX_CFG_CLK 112
+#define GCC_UFS_TX_CFG_CLK 113
+#define GCC_USB30_MASTER_CLK 114
+#define GCC_USB30_MOCK_UTMI_CLK 115
+#define GCC_USB3_PHY_AUX_CLK 116
+#define GCC_USB_HS_SYSTEM_CLK 117
+
+/* Indexes for GDSCs */
+#define BIMC_GDSC 0
+#define VENUS_GDSC 1
+#define MDSS_GDSC 2
+#define JPEG_GDSC 3
+#define VFE_GDSC 4
+#define OXILI_GDSC 5
+
+#endif
--
2.9.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH V6 3/6] dt-bindings: qcom: Add msm899(2/4) bindings
From: Jeremy McNicoll @ 2016-11-04 20:56 UTC (permalink / raw)
To: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: robh-DgEjT+Ai2ygdnm+yROfE0A, andy.gross-QSEj5FYQhm4dnm+yROfE0A,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ, mail-LJ92rlH3Dns, arnd-r2nGTMty4D4,
bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
michael.scott-QSEj5FYQhm4dnm+yROfE0A,
jeremymc-H+wXaHxf7aLQT0dZR+AlfA
In-Reply-To: <1478292996-29559-1-git-send-email-jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
From: Jeremy McNicoll <jmcnicol-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Jeremy McNicoll <jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Documentation/devicetree/bindings/arm/qcom.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.txt b/Documentation/devicetree/bindings/arm/qcom.txt
index 3e24518..eb4057e 100644
--- a/Documentation/devicetree/bindings/arm/qcom.txt
+++ b/Documentation/devicetree/bindings/arm/qcom.txt
@@ -21,6 +21,8 @@ The 'SoC' element must be one of the following strings:
apq8096
msm8916
msm8974
+ msm8992
+ msm8994
msm8996
The 'board' element must be one of the following strings:
--
2.9.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH V6 4/6] arm64: configs: enable configs for msm899(2/4) basic support
From: Jeremy McNicoll @ 2016-11-04 20:56 UTC (permalink / raw)
To: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: robh-DgEjT+Ai2ygdnm+yROfE0A, andy.gross-QSEj5FYQhm4dnm+yROfE0A,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ, mail-LJ92rlH3Dns, arnd-r2nGTMty4D4,
bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
michael.scott-QSEj5FYQhm4dnm+yROfE0A,
jeremymc-H+wXaHxf7aLQT0dZR+AlfA
In-Reply-To: <1478292996-29559-1-git-send-email-jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
From: Jeremy McNicoll <jmcnicol-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Given the mimimal hardware support for msm899(2/4) currently.
A few config options are needed to allow for continued
development and booting.
The following are needed for continued development and
booting:
-8994 pinctrl for serial support
-Enable Global Glock Controller (gcc)
Signed-off-by: Jeremy McNicoll <jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index dab2cb0..a71bb7a 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -249,6 +249,7 @@ CONFIG_SPMI=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8994=y
CONFIG_PINCTRL_MSM8996=y
CONFIG_PINCTRL_QDF2XXX=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
@@ -390,6 +391,7 @@ CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_QORIQ=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_GCC_8994=y
CONFIG_MSM_MMCC_8996=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_MAILBOX=y
--
2.9.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH V6 5/6] msm8994 clocks: global clock support for msm8994 SOC.
From: Jeremy McNicoll @ 2016-11-04 20:56 UTC (permalink / raw)
To: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: robh-DgEjT+Ai2ygdnm+yROfE0A, andy.gross-QSEj5FYQhm4dnm+yROfE0A,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ, mail-LJ92rlH3Dns, arnd-r2nGTMty4D4,
bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
michael.scott-QSEj5FYQhm4dnm+yROfE0A,
jeremymc-H+wXaHxf7aLQT0dZR+AlfA
In-Reply-To: <1478292996-29559-1-git-send-email-jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
From: Bastian Köcher <mail-LJ92rlH3Dns@public.gmane.org>
The clock definition was ported from the Google 3.10 kernel tree to
work with the latest kernel.
Signed-off-by: Bastian Köcher <mail-LJ92rlH3Dns@public.gmane.org>
[jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org: created new commit of just dt-bindings]
Signed-off-by: Jeremy McNicoll <jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-msm8994.c | 2301 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 2309 insertions(+)
create mode 100644 drivers/clk/qcom/gcc-msm8994.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0146d3c..e0e19a3 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -132,6 +132,13 @@ config MSM_MMCC_8974
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
+config MSM_GCC_8994
+ tristate "MSM8994 Global Clock Controller"
+ depends on COMMON_CLK_QCOM
+ help
+ Support for the global clock controller on msm8994 devices.
+ Say Y if you want to use peripheral devices such as UART, USB, etc.
+
config MSM_GCC_8996
tristate "MSM8996 Global Clock Controller"
select QCOM_GDSC
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 1fb1f54..9f14927 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o
obj-$(CONFIG_MSM_GCC_8916) += gcc-msm8916.o
obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
+obj-$(CONFIG_MSM_GCC_8994) += gcc-msm8994.o
obj-$(CONFIG_MSM_GCC_8996) += gcc-msm8996.o
obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
new file mode 100644
index 0000000..e3d15e4
--- /dev/null
+++ b/drivers/clk/qcom/gcc-msm8994.c
@@ -0,0 +1,2301 @@
+/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+
+#include "common.h"
+#include "clk-regmap.h"
+#include "clk-alpha-pll.h"
+#include "clk-rcg.h"
+#include "clk-branch.h"
+#include "reset.h"
+
+enum {
+ P_XO,
+ P_GPLL0,
+ P_GPLL4,
+};
+
+static const struct parent_map gcc_xo_gpll0_map[] = {
+ { P_XO, 0 },
+ { P_GPLL0, 1 },
+};
+
+static const char * const gcc_xo_gpll0[] = {
+ "xo",
+ "gpll0",
+};
+
+static const struct parent_map gcc_xo_gpll0_gpll4_map[] = {
+ { P_XO, 0 },
+ { P_GPLL0, 1 },
+ { P_GPLL4, 5 },
+};
+
+static const char * const gcc_xo_gpll0_gpll4[] = {
+ "xo",
+ "gpll0",
+ "gpll4",
+};
+
+#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
+
+static struct clk_fixed_factor xo = {
+ .mult = 1,
+ .div = 1,
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "xo",
+ .parent_names = (const char *[]) { "xo_board" },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ },
+};
+
+static struct clk_alpha_pll gpll0_early = {
+ .offset = 0x00000,
+ .clkr = {
+ .enable_reg = 0x1480,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gpll0_early",
+ .parent_names = (const char *[]) { "xo" },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll0 = {
+ .offset = 0x00000,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "gpll0",
+ .parent_names = (const char *[]) { "gpll0_early" },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ops,
+ },
+};
+
+static struct clk_alpha_pll gpll4_early = {
+ .offset = 0x1dc0,
+ .clkr = {
+ .enable_reg = 0x1480,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gpll4_early",
+ .parent_names = (const char *[]) { "xo" },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll4 = {
+ .offset = 0x1dc0,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "gpll4",
+ .parent_names = (const char *[]) { "gpll4_early" },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ops,
+ },
+};
+
+static struct freq_tbl ftbl_ufs_axi_clk_src[] = {
+ F(50000000, P_GPLL0, 12, 0, 0),
+ F(100000000, P_GPLL0, 6, 0, 0),
+ F(150000000, P_GPLL0, 4, 0, 0),
+ F(171430000, P_GPLL0, 3.5, 0, 0),
+ F(200000000, P_GPLL0, 3, 0, 0),
+ F(240000000, P_GPLL0, 2.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 ufs_axi_clk_src = {
+ .cmd_rcgr = 0x1d68,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_ufs_axi_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "ufs_axi_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_usb30_master_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ F(125000000, P_GPLL0, 1, 5, 24),
+ { }
+};
+
+static struct clk_rcg2 usb30_master_clk_src = {
+ .cmd_rcgr = 0x03d4,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_usb30_master_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "usb30_master_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_blsp_i2c_apps_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ F(50000000, P_GPLL0, 12, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 blsp1_qup1_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x0660,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup1_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_blspqup_spi_apps_clk_src[] = {
+ F(960000, P_XO, 10, 1, 2),
+ F(4800000, P_XO, 4, 0, 0),
+ F(9600000, P_XO, 2, 0, 0),
+ F(15000000, P_GPLL0, 10, 1, 4),
+ F(19200000, P_XO, 1, 0, 0),
+ F(24000000, P_GPLL0, 12.5, 1, 2),
+ F(25000000, P_GPLL0, 12, 1, 2),
+ F(48000000, P_GPLL0, 12.5, 0, 0),
+ F(50000000, P_GPLL0, 12, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 blsp1_qup1_spi_apps_clk_src = {
+ .cmd_rcgr = 0x064c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup1_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup2_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x06e0,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup2_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup2_spi_apps_clk_src = {
+ .cmd_rcgr = 0x06cc,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup2_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup3_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x0760,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup3_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup3_spi_apps_clk_src = {
+ .cmd_rcgr = 0x074c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup3_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup4_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x07e0,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup4_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup4_spi_apps_clk_src = {
+ .cmd_rcgr = 0x07cc,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup4_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup5_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x0860,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup5_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup5_spi_apps_clk_src = {
+ .cmd_rcgr = 0x084c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup5_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup6_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x08e0,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup6_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_qup6_spi_apps_clk_src = {
+ .cmd_rcgr = 0x08cc,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_qup6_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_blsp_uart_apps_clk_src[] = {
+ F(3686400, P_GPLL0, 1, 96, 15625),
+ F(7372800, P_GPLL0, 1, 192, 15625),
+ F(14745600, P_GPLL0, 1, 384, 15625),
+ F(16000000, P_GPLL0, 5, 2, 15),
+ F(19200000, P_XO, 1, 0, 0),
+ F(24000000, P_GPLL0, 5, 1, 5),
+ F(32000000, P_GPLL0, 1, 4, 75),
+ F(40000000, P_GPLL0, 15, 0, 0),
+ F(46400000, P_GPLL0, 1, 29, 375),
+ F(48000000, P_GPLL0, 12.5, 0, 0),
+ F(51200000, P_GPLL0, 1, 32, 375),
+ F(56000000, P_GPLL0, 1, 7, 75),
+ F(58982400, P_GPLL0, 1, 1536, 15625),
+ F(60000000, P_GPLL0, 10, 0, 0),
+ F(63160000, P_GPLL0, 9.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 blsp1_uart1_apps_clk_src = {
+ .cmd_rcgr = 0x068c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_uart1_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_uart2_apps_clk_src = {
+ .cmd_rcgr = 0x070c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_uart2_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_uart3_apps_clk_src = {
+ .cmd_rcgr = 0x078c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_uart3_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_uart4_apps_clk_src = {
+ .cmd_rcgr = 0x080c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_uart4_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_uart5_apps_clk_src = {
+ .cmd_rcgr = 0x088c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_uart5_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp1_uart6_apps_clk_src = {
+ .cmd_rcgr = 0x090c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp1_uart6_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup1_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x09a0,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup1_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup1_spi_apps_clk_src = {
+ .cmd_rcgr = 0x098c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup1_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup2_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x0a20,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup2_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup2_spi_apps_clk_src = {
+ .cmd_rcgr = 0x0a0c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup2_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup3_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x0aa0,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup3_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup3_spi_apps_clk_src = {
+ .cmd_rcgr = 0x0a8c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup3_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup4_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x0b20,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup4_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup4_spi_apps_clk_src = {
+ .cmd_rcgr = 0x0b0c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup4_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup5_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x0ba0,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup5_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup5_spi_apps_clk_src = {
+ .cmd_rcgr = 0x0b8c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup5_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup6_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x0c20,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup6_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_qup6_spi_apps_clk_src = {
+ .cmd_rcgr = 0x0c0c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blspqup_spi_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_qup6_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_uart1_apps_clk_src = {
+ .cmd_rcgr = 0x09cc,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_uart1_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_uart2_apps_clk_src = {
+ .cmd_rcgr = 0x0a4c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_uart2_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_uart3_apps_clk_src = {
+ .cmd_rcgr = 0x0acc,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_uart3_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_uart4_apps_clk_src = {
+ .cmd_rcgr = 0x0b4c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_uart4_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_uart5_apps_clk_src = {
+ .cmd_rcgr = 0x0bcc,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_uart5_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 blsp2_uart6_apps_clk_src = {
+ .cmd_rcgr = 0x0c4c,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_blsp_uart_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "blsp2_uart6_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_gp1_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ F(100000000, P_GPLL0, 6, 0, 0),
+ F(200000000, P_GPLL0, 3, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gp1_clk_src = {
+ .cmd_rcgr = 0x1904,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_gp1_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "gp1_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_gp2_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ F(100000000, P_GPLL0, 6, 0, 0),
+ F(200000000, P_GPLL0, 3, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gp2_clk_src = {
+ .cmd_rcgr = 0x1944,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_gp2_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "gp2_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_gp3_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ F(100000000, P_GPLL0, 6, 0, 0),
+ F(200000000, P_GPLL0, 3, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gp3_clk_src = {
+ .cmd_rcgr = 0x1984,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_gp3_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "gp3_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_pcie_0_aux_clk_src[] = {
+ F(1011000, P_XO, 1, 1, 19),
+ { }
+};
+
+static struct clk_rcg2 pcie_0_aux_clk_src = {
+ .cmd_rcgr = 0x1b00,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .freq_tbl = ftbl_pcie_0_aux_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "pcie_0_aux_clk_src",
+ .parent_names = (const char *[]) { "xo" },
+ .num_parents = 1,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_pcie_pipe_clk_src[] = {
+ F(125000000, P_XO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 pcie_0_pipe_clk_src = {
+ .cmd_rcgr = 0x1adc,
+ .hid_width = 5,
+ .freq_tbl = ftbl_pcie_pipe_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "pcie_0_pipe_clk_src",
+ .parent_names = (const char *[]) { "xo" },
+ .num_parents = 1,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_pcie_1_aux_clk_src[] = {
+ F(1011000, P_XO, 1, 1, 19),
+ { }
+};
+
+static struct clk_rcg2 pcie_1_aux_clk_src = {
+ .cmd_rcgr = 0x1b80,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .freq_tbl = ftbl_pcie_1_aux_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "pcie_1_aux_clk_src",
+ .parent_names = (const char *[]) { "xo" },
+ .num_parents = 1,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 pcie_1_pipe_clk_src = {
+ .cmd_rcgr = 0x1b5c,
+ .hid_width = 5,
+ .freq_tbl = ftbl_pcie_pipe_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "pcie_1_pipe_clk_src",
+ .parent_names = (const char *[]) { "xo" },
+ .num_parents = 1,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_pdm2_clk_src[] = {
+ F(60000000, P_GPLL0, 10, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 pdm2_clk_src = {
+ .cmd_rcgr = 0x0cd0,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_pdm2_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "pdm2_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_sdcc1_apps_clk_src[] = {
+ F(144000, P_XO, 16, 3, 25),
+ F(400000, P_XO, 12, 1, 4),
+ F(20000000, P_GPLL0, 15, 1, 2),
+ F(25000000, P_GPLL0, 12, 1, 2),
+ F(50000000, P_GPLL0, 12, 0, 0),
+ F(100000000, P_GPLL0, 6, 0, 0),
+ F(192000000, P_GPLL4, 2, 0, 0),
+ F(384000000, P_GPLL4, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 sdcc1_apps_clk_src = {
+ .cmd_rcgr = 0x04d0,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll4_map,
+ .freq_tbl = ftbl_sdcc1_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "sdcc1_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll4,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_sdcc2_4_apps_clk_src[] = {
+ F(144000, P_XO, 16, 3, 25),
+ F(400000, P_XO, 12, 1, 4),
+ F(20000000, P_GPLL0, 15, 1, 2),
+ F(25000000, P_GPLL0, 12, 1, 2),
+ F(50000000, P_GPLL0, 12, 0, 0),
+ F(100000000, P_GPLL0, 6, 0, 0),
+ F(200000000, P_GPLL0, 3, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 sdcc2_apps_clk_src = {
+ .cmd_rcgr = 0x0510,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_sdcc2_4_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "sdcc2_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 sdcc3_apps_clk_src = {
+ .cmd_rcgr = 0x0550,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_sdcc2_4_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "sdcc3_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 sdcc4_apps_clk_src = {
+ .cmd_rcgr = 0x0590,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_sdcc2_4_apps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "sdcc4_apps_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_tsif_ref_clk_src[] = {
+ F(105500, P_XO, 1, 1, 182),
+ { }
+};
+
+static struct clk_rcg2 tsif_ref_clk_src = {
+ .cmd_rcgr = 0x0d90,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .freq_tbl = ftbl_tsif_ref_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "tsif_ref_clk_src",
+ .parent_names = (const char *[]) { "xo" },
+ .num_parents = 1,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_usb30_mock_utmi_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ F(60000000, P_GPLL0, 10, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 usb30_mock_utmi_clk_src = {
+ .cmd_rcgr = 0x03e8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_usb30_mock_utmi_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "usb30_mock_utmi_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_usb3_phy_aux_clk_src[] = {
+ F(1200000, P_XO, 16, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 usb3_phy_aux_clk_src = {
+ .cmd_rcgr = 0x1414,
+ .hid_width = 5,
+ .freq_tbl = ftbl_usb3_phy_aux_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "usb3_phy_aux_clk_src",
+ .parent_names = (const char *[]) { "xo" },
+ .num_parents = 1,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct freq_tbl ftbl_usb_hs_system_clk_src[] = {
+ F(75000000, P_GPLL0, 8, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 usb_hs_system_clk_src = {
+ .cmd_rcgr = 0x0490,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_map,
+ .freq_tbl = ftbl_usb_hs_system_clk_src,
+ .clkr.hw.init = &(struct clk_init_data)
+ {
+ .name = "usb_hs_system_clk_src",
+ .parent_names = gcc_xo_gpll0,
+ .num_parents = 2,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gcc_blsp1_ahb_clk = {
+ .halt_reg = 0x05c4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1484,
+ .enable_mask = BIT(17),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup1_i2c_apps_clk = {
+ .halt_reg = 0x0648,
+ .clkr = {
+ .enable_reg = 0x0648,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup1_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup1_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup1_spi_apps_clk = {
+ .halt_reg = 0x0644,
+ .clkr = {
+ .enable_reg = 0x0644,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup1_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup1_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup2_i2c_apps_clk = {
+ .halt_reg = 0x06c8,
+ .clkr = {
+ .enable_reg = 0x06c8,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup2_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup2_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup2_spi_apps_clk = {
+ .halt_reg = 0x06c4,
+ .clkr = {
+ .enable_reg = 0x06c4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup2_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup2_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup3_i2c_apps_clk = {
+ .halt_reg = 0x0748,
+ .clkr = {
+ .enable_reg = 0x0748,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup3_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup3_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup3_spi_apps_clk = {
+ .halt_reg = 0x0744,
+ .clkr = {
+ .enable_reg = 0x0744,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup3_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup3_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup4_i2c_apps_clk = {
+ .halt_reg = 0x07c8,
+ .clkr = {
+ .enable_reg = 0x07c8,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup4_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup4_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup4_spi_apps_clk = {
+ .halt_reg = 0x07c4,
+ .clkr = {
+ .enable_reg = 0x07c4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup4_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup4_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup5_i2c_apps_clk = {
+ .halt_reg = 0x0848,
+ .clkr = {
+ .enable_reg = 0x0848,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup5_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup5_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup5_spi_apps_clk = {
+ .halt_reg = 0x0844,
+ .clkr = {
+ .enable_reg = 0x0844,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup5_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup5_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup6_i2c_apps_clk = {
+ .halt_reg = 0x08c8,
+ .clkr = {
+ .enable_reg = 0x08c8,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup6_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup6_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup6_spi_apps_clk = {
+ .halt_reg = 0x08c4,
+ .clkr = {
+ .enable_reg = 0x08c4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_qup6_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_qup6_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart1_apps_clk = {
+ .halt_reg = 0x0684,
+ .clkr = {
+ .enable_reg = 0x0684,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_uart1_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_uart1_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart2_apps_clk = {
+ .halt_reg = 0x0704,
+ .clkr = {
+ .enable_reg = 0x0704,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_uart2_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_uart2_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart3_apps_clk = {
+ .halt_reg = 0x0784,
+ .clkr = {
+ .enable_reg = 0x0784,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_uart3_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_uart3_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart4_apps_clk = {
+ .halt_reg = 0x0804,
+ .clkr = {
+ .enable_reg = 0x0804,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_uart4_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_uart4_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart5_apps_clk = {
+ .halt_reg = 0x0884,
+ .clkr = {
+ .enable_reg = 0x0884,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_uart5_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_uart5_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart6_apps_clk = {
+ .halt_reg = 0x0904,
+ .clkr = {
+ .enable_reg = 0x0904,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp1_uart6_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp1_uart6_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_ahb_clk = {
+ .halt_reg = 0x0944,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1484,
+ .enable_mask = BIT(15),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup1_i2c_apps_clk = {
+ .halt_reg = 0x0988,
+ .clkr = {
+ .enable_reg = 0x0988,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup1_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup1_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup1_spi_apps_clk = {
+ .halt_reg = 0x0984,
+ .clkr = {
+ .enable_reg = 0x0984,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup1_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup1_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup2_i2c_apps_clk = {
+ .halt_reg = 0x0a08,
+ .clkr = {
+ .enable_reg = 0x0a08,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup2_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup2_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup2_spi_apps_clk = {
+ .halt_reg = 0x0a04,
+ .clkr = {
+ .enable_reg = 0x0a04,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup2_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup2_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup3_i2c_apps_clk = {
+ .halt_reg = 0x0a88,
+ .clkr = {
+ .enable_reg = 0x0a88,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup3_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup3_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup3_spi_apps_clk = {
+ .halt_reg = 0x0a84,
+ .clkr = {
+ .enable_reg = 0x0a84,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup3_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup3_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup4_i2c_apps_clk = {
+ .halt_reg = 0x0b08,
+ .clkr = {
+ .enable_reg = 0x0b08,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup4_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup4_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup4_spi_apps_clk = {
+ .halt_reg = 0x0b04,
+ .clkr = {
+ .enable_reg = 0x0b04,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup4_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup4_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup5_i2c_apps_clk = {
+ .halt_reg = 0x0b88,
+ .clkr = {
+ .enable_reg = 0x0b88,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup5_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup5_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup5_spi_apps_clk = {
+ .halt_reg = 0x0b84,
+ .clkr = {
+ .enable_reg = 0x0b84,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup5_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup5_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup6_i2c_apps_clk = {
+ .halt_reg = 0x0c08,
+ .clkr = {
+ .enable_reg = 0x0c08,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup6_i2c_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup6_i2c_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_qup6_spi_apps_clk = {
+ .halt_reg = 0x0c04,
+ .clkr = {
+ .enable_reg = 0x0c04,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_qup6_spi_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_qup6_spi_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_uart1_apps_clk = {
+ .halt_reg = 0x09c4,
+ .clkr = {
+ .enable_reg = 0x09c4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_uart1_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_uart1_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_uart2_apps_clk = {
+ .halt_reg = 0x0a44,
+ .clkr = {
+ .enable_reg = 0x0a44,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_uart2_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_uart2_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_uart3_apps_clk = {
+ .halt_reg = 0x0ac4,
+ .clkr = {
+ .enable_reg = 0x0ac4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_uart3_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_uart3_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_uart4_apps_clk = {
+ .halt_reg = 0x0b44,
+ .clkr = {
+ .enable_reg = 0x0b44,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_uart4_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_uart4_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_uart5_apps_clk = {
+ .halt_reg = 0x0bc4,
+ .clkr = {
+ .enable_reg = 0x0bc4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_uart5_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_uart5_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp2_uart6_apps_clk = {
+ .halt_reg = 0x0c44,
+ .clkr = {
+ .enable_reg = 0x0c44,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_blsp2_uart6_apps_clk",
+ .parent_names = (const char *[]) {
+ "blsp2_uart6_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp1_clk = {
+ .halt_reg = 0x1900,
+ .clkr = {
+ .enable_reg = 0x1900,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_gp1_clk",
+ .parent_names = (const char *[]) {
+ "gp1_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp2_clk = {
+ .halt_reg = 0x1940,
+ .clkr = {
+ .enable_reg = 0x1940,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_gp2_clk",
+ .parent_names = (const char *[]) {
+ "gp2_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_gp3_clk = {
+ .halt_reg = 0x1980,
+ .clkr = {
+ .enable_reg = 0x1980,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_gp3_clk",
+ .parent_names = (const char *[]) {
+ "gp3_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_0_aux_clk = {
+ .halt_reg = 0x1ad4,
+ .clkr = {
+ .enable_reg = 0x1ad4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_0_aux_clk",
+ .parent_names = (const char *[]) {
+ "pcie_0_aux_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_0_pipe_clk = {
+ .halt_reg = 0x1ad8,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1ad8,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_0_pipe_clk",
+ .parent_names = (const char *[]) {
+ "pcie_0_pipe_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_1_aux_clk = {
+ .halt_reg = 0x1b54,
+ .clkr = {
+ .enable_reg = 0x1b54,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_1_aux_clk",
+ .parent_names = (const char *[]) {
+ "pcie_1_aux_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_1_pipe_clk = {
+ .halt_reg = 0x1b58,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1b58,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_1_pipe_clk",
+ .parent_names = (const char *[]) {
+ "pcie_1_pipe_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pdm2_clk = {
+ .halt_reg = 0x0ccc,
+ .clkr = {
+ .enable_reg = 0x0ccc,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pdm2_clk",
+ .parent_names = (const char *[]) {
+ "pdm2_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc1_apps_clk = {
+ .halt_reg = 0x04c4,
+ .clkr = {
+ .enable_reg = 0x04c4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_sdcc1_apps_clk",
+ .parent_names = (const char *[]) {
+ "sdcc1_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc2_apps_clk = {
+ .halt_reg = 0x0504,
+ .clkr = {
+ .enable_reg = 0x0504,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_sdcc2_apps_clk",
+ .parent_names = (const char *[]) {
+ "sdcc2_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc3_apps_clk = {
+ .halt_reg = 0x0544,
+ .clkr = {
+ .enable_reg = 0x0544,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_sdcc3_apps_clk",
+ .parent_names = (const char *[]) {
+ "sdcc3_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sdcc4_apps_clk = {
+ .halt_reg = 0x0584,
+ .clkr = {
+ .enable_reg = 0x0584,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_sdcc4_apps_clk",
+ .parent_names = (const char *[]) {
+ "sdcc4_apps_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sys_noc_ufs_axi_clk = {
+ .halt_reg = 0x1d7c,
+ .clkr = {
+ .enable_reg = 0x1d7c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_sys_noc_ufs_axi_clk",
+ .parent_names = (const char *[]) {
+ "ufs_axi_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_sys_noc_usb3_axi_clk = {
+ .halt_reg = 0x03fc,
+ .clkr = {
+ .enable_reg = 0x03fc,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_sys_noc_usb3_axi_clk",
+ .parent_names = (const char *[]) {
+ "usb30_master_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_tsif_ref_clk = {
+ .halt_reg = 0x0d88,
+ .clkr = {
+ .enable_reg = 0x0d88,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_tsif_ref_clk",
+ .parent_names = (const char *[]) {
+ "tsif_ref_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_axi_clk = {
+ .halt_reg = 0x1d48,
+ .clkr = {
+ .enable_reg = 0x1d48,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_ufs_axi_clk",
+ .parent_names = (const char *[]) {
+ "ufs_axi_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_rx_cfg_clk = {
+ .halt_reg = 0x1d54,
+ .clkr = {
+ .enable_reg = 0x1d54,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_ufs_rx_cfg_clk",
+ .parent_names = (const char *[]) {
+ "ufs_axi_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_tx_cfg_clk = {
+ .halt_reg = 0x1d50,
+ .clkr = {
+ .enable_reg = 0x1d50,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_ufs_tx_cfg_clk",
+ .parent_names = (const char *[]) {
+ "ufs_axi_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb30_master_clk = {
+ .halt_reg = 0x03c8,
+ .clkr = {
+ .enable_reg = 0x03c8,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_usb30_master_clk",
+ .parent_names = (const char *[]) {
+ "usb30_master_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb30_mock_utmi_clk = {
+ .halt_reg = 0x03d0,
+ .clkr = {
+ .enable_reg = 0x03d0,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_usb30_mock_utmi_clk",
+ .parent_names = (const char *[]) {
+ "usb30_mock_utmi_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb3_phy_aux_clk = {
+ .halt_reg = 0x1408,
+ .clkr = {
+ .enable_reg = 0x1408,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_usb3_phy_aux_clk",
+ .parent_names = (const char *[]) {
+ "usb3_phy_aux_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb_hs_system_clk = {
+ .halt_reg = 0x0484,
+ .clkr = {
+ .enable_reg = 0x0484,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_usb_hs_system_clk",
+ .parent_names = (const char *[]) {
+ "usb_hs_system_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_regmap *gcc_msm8994_clocks[] = {
+ [GPLL0_EARLY] = &gpll0_early.clkr,
+ [GPLL0] = &gpll0.clkr,
+ [GPLL4_EARLY] = &gpll4_early.clkr,
+ [GPLL4] = &gpll4.clkr,
+ [UFS_AXI_CLK_SRC] = &ufs_axi_clk_src.clkr,
+ [USB30_MASTER_CLK_SRC] = &usb30_master_clk_src.clkr,
+ [BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr,
+ [BLSP1_QUP2_I2C_APPS_CLK_SRC] = &blsp1_qup2_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP2_SPI_APPS_CLK_SRC] = &blsp1_qup2_spi_apps_clk_src.clkr,
+ [BLSP1_QUP3_I2C_APPS_CLK_SRC] = &blsp1_qup3_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP3_SPI_APPS_CLK_SRC] = &blsp1_qup3_spi_apps_clk_src.clkr,
+ [BLSP1_QUP4_I2C_APPS_CLK_SRC] = &blsp1_qup4_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP4_SPI_APPS_CLK_SRC] = &blsp1_qup4_spi_apps_clk_src.clkr,
+ [BLSP1_QUP5_I2C_APPS_CLK_SRC] = &blsp1_qup5_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP5_SPI_APPS_CLK_SRC] = &blsp1_qup5_spi_apps_clk_src.clkr,
+ [BLSP1_QUP6_I2C_APPS_CLK_SRC] = &blsp1_qup6_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP6_SPI_APPS_CLK_SRC] = &blsp1_qup6_spi_apps_clk_src.clkr,
+ [BLSP1_UART1_APPS_CLK_SRC] = &blsp1_uart1_apps_clk_src.clkr,
+ [BLSP1_UART2_APPS_CLK_SRC] = &blsp1_uart2_apps_clk_src.clkr,
+ [BLSP1_UART3_APPS_CLK_SRC] = &blsp1_uart3_apps_clk_src.clkr,
+ [BLSP1_UART4_APPS_CLK_SRC] = &blsp1_uart4_apps_clk_src.clkr,
+ [BLSP1_UART5_APPS_CLK_SRC] = &blsp1_uart5_apps_clk_src.clkr,
+ [BLSP1_UART6_APPS_CLK_SRC] = &blsp1_uart6_apps_clk_src.clkr,
+ [BLSP2_QUP1_I2C_APPS_CLK_SRC] = &blsp2_qup1_i2c_apps_clk_src.clkr,
+ [BLSP2_QUP1_SPI_APPS_CLK_SRC] = &blsp2_qup1_spi_apps_clk_src.clkr,
+ [BLSP2_QUP2_I2C_APPS_CLK_SRC] = &blsp2_qup2_i2c_apps_clk_src.clkr,
+ [BLSP2_QUP2_SPI_APPS_CLK_SRC] = &blsp2_qup2_spi_apps_clk_src.clkr,
+ [BLSP2_QUP3_I2C_APPS_CLK_SRC] = &blsp2_qup3_i2c_apps_clk_src.clkr,
+ [BLSP2_QUP3_SPI_APPS_CLK_SRC] = &blsp2_qup3_spi_apps_clk_src.clkr,
+ [BLSP2_QUP4_I2C_APPS_CLK_SRC] = &blsp2_qup4_i2c_apps_clk_src.clkr,
+ [BLSP2_QUP4_SPI_APPS_CLK_SRC] = &blsp2_qup4_spi_apps_clk_src.clkr,
+ [BLSP2_QUP5_I2C_APPS_CLK_SRC] = &blsp2_qup5_i2c_apps_clk_src.clkr,
+ [BLSP2_QUP5_SPI_APPS_CLK_SRC] = &blsp2_qup5_spi_apps_clk_src.clkr,
+ [BLSP2_QUP6_I2C_APPS_CLK_SRC] = &blsp2_qup6_i2c_apps_clk_src.clkr,
+ [BLSP2_QUP6_SPI_APPS_CLK_SRC] = &blsp2_qup6_spi_apps_clk_src.clkr,
+ [BLSP2_UART1_APPS_CLK_SRC] = &blsp2_uart1_apps_clk_src.clkr,
+ [BLSP2_UART2_APPS_CLK_SRC] = &blsp2_uart2_apps_clk_src.clkr,
+ [BLSP2_UART3_APPS_CLK_SRC] = &blsp2_uart3_apps_clk_src.clkr,
+ [BLSP2_UART4_APPS_CLK_SRC] = &blsp2_uart4_apps_clk_src.clkr,
+ [BLSP2_UART5_APPS_CLK_SRC] = &blsp2_uart5_apps_clk_src.clkr,
+ [BLSP2_UART6_APPS_CLK_SRC] = &blsp2_uart6_apps_clk_src.clkr,
+ [GP1_CLK_SRC] = &gp1_clk_src.clkr,
+ [GP2_CLK_SRC] = &gp2_clk_src.clkr,
+ [GP3_CLK_SRC] = &gp3_clk_src.clkr,
+ [PCIE_0_AUX_CLK_SRC] = &pcie_0_aux_clk_src.clkr,
+ [PCIE_0_PIPE_CLK_SRC] = &pcie_0_pipe_clk_src.clkr,
+ [PCIE_1_AUX_CLK_SRC] = &pcie_1_aux_clk_src.clkr,
+ [PCIE_1_PIPE_CLK_SRC] = &pcie_1_pipe_clk_src.clkr,
+ [PDM2_CLK_SRC] = &pdm2_clk_src.clkr,
+ [SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr,
+ [SDCC2_APPS_CLK_SRC] = &sdcc2_apps_clk_src.clkr,
+ [SDCC3_APPS_CLK_SRC] = &sdcc3_apps_clk_src.clkr,
+ [SDCC4_APPS_CLK_SRC] = &sdcc4_apps_clk_src.clkr,
+ [TSIF_REF_CLK_SRC] = &tsif_ref_clk_src.clkr,
+ [USB30_MOCK_UTMI_CLK_SRC] = &usb30_mock_utmi_clk_src.clkr,
+ [USB3_PHY_AUX_CLK_SRC] = &usb3_phy_aux_clk_src.clkr,
+ [USB_HS_SYSTEM_CLK_SRC] = &usb_hs_system_clk_src.clkr,
+ [GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
+ [GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP4_I2C_APPS_CLK] = &gcc_blsp1_qup4_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP5_I2C_APPS_CLK] = &gcc_blsp1_qup5_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP5_SPI_APPS_CLK] = &gcc_blsp1_qup5_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP6_I2C_APPS_CLK] = &gcc_blsp1_qup6_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP6_SPI_APPS_CLK] = &gcc_blsp1_qup6_spi_apps_clk.clkr,
+ [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
+ [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
+ [GCC_BLSP1_UART3_APPS_CLK] = &gcc_blsp1_uart3_apps_clk.clkr,
+ [GCC_BLSP1_UART4_APPS_CLK] = &gcc_blsp1_uart4_apps_clk.clkr,
+ [GCC_BLSP1_UART5_APPS_CLK] = &gcc_blsp1_uart5_apps_clk.clkr,
+ [GCC_BLSP1_UART6_APPS_CLK] = &gcc_blsp1_uart6_apps_clk.clkr,
+ [GCC_BLSP2_AHB_CLK] = &gcc_blsp2_ahb_clk.clkr,
+ [GCC_BLSP2_QUP1_I2C_APPS_CLK] = &gcc_blsp2_qup1_i2c_apps_clk.clkr,
+ [GCC_BLSP2_QUP1_SPI_APPS_CLK] = &gcc_blsp2_qup1_spi_apps_clk.clkr,
+ [GCC_BLSP2_QUP2_I2C_APPS_CLK] = &gcc_blsp2_qup2_i2c_apps_clk.clkr,
+ [GCC_BLSP2_QUP2_SPI_APPS_CLK] = &gcc_blsp2_qup2_spi_apps_clk.clkr,
+ [GCC_BLSP2_QUP3_I2C_APPS_CLK] = &gcc_blsp2_qup3_i2c_apps_clk.clkr,
+ [GCC_BLSP2_QUP3_SPI_APPS_CLK] = &gcc_blsp2_qup3_spi_apps_clk.clkr,
+ [GCC_BLSP2_QUP4_I2C_APPS_CLK] = &gcc_blsp2_qup4_i2c_apps_clk.clkr,
+ [GCC_BLSP2_QUP4_SPI_APPS_CLK] = &gcc_blsp2_qup4_spi_apps_clk.clkr,
+ [GCC_BLSP2_QUP5_I2C_APPS_CLK] = &gcc_blsp2_qup5_i2c_apps_clk.clkr,
+ [GCC_BLSP2_QUP5_SPI_APPS_CLK] = &gcc_blsp2_qup5_spi_apps_clk.clkr,
+ [GCC_BLSP2_QUP6_I2C_APPS_CLK] = &gcc_blsp2_qup6_i2c_apps_clk.clkr,
+ [GCC_BLSP2_QUP6_SPI_APPS_CLK] = &gcc_blsp2_qup6_spi_apps_clk.clkr,
+ [GCC_BLSP2_UART1_APPS_CLK] = &gcc_blsp2_uart1_apps_clk.clkr,
+ [GCC_BLSP2_UART2_APPS_CLK] = &gcc_blsp2_uart2_apps_clk.clkr,
+ [GCC_BLSP2_UART3_APPS_CLK] = &gcc_blsp2_uart3_apps_clk.clkr,
+ [GCC_BLSP2_UART4_APPS_CLK] = &gcc_blsp2_uart4_apps_clk.clkr,
+ [GCC_BLSP2_UART5_APPS_CLK] = &gcc_blsp2_uart5_apps_clk.clkr,
+ [GCC_BLSP2_UART6_APPS_CLK] = &gcc_blsp2_uart6_apps_clk.clkr,
+ [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+ [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+ [GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+ [GCC_PCIE_0_AUX_CLK] = &gcc_pcie_0_aux_clk.clkr,
+ [GCC_PCIE_0_PIPE_CLK] = &gcc_pcie_0_pipe_clk.clkr,
+ [GCC_PCIE_1_AUX_CLK] = &gcc_pcie_1_aux_clk.clkr,
+ [GCC_PCIE_1_PIPE_CLK] = &gcc_pcie_1_pipe_clk.clkr,
+ [GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr,
+ [GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
+ [GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
+ [GCC_SDCC3_APPS_CLK] = &gcc_sdcc3_apps_clk.clkr,
+ [GCC_SDCC4_APPS_CLK] = &gcc_sdcc4_apps_clk.clkr,
+ [GCC_SYS_NOC_UFS_AXI_CLK] = &gcc_sys_noc_ufs_axi_clk.clkr,
+ [GCC_SYS_NOC_USB3_AXI_CLK] = &gcc_sys_noc_usb3_axi_clk.clkr,
+ [GCC_TSIF_REF_CLK] = &gcc_tsif_ref_clk.clkr,
+ [GCC_UFS_AXI_CLK] = &gcc_ufs_axi_clk.clkr,
+ [GCC_UFS_RX_CFG_CLK] = &gcc_ufs_rx_cfg_clk.clkr,
+ [GCC_UFS_TX_CFG_CLK] = &gcc_ufs_tx_cfg_clk.clkr,
+ [GCC_USB30_MASTER_CLK] = &gcc_usb30_master_clk.clkr,
+ [GCC_USB30_MOCK_UTMI_CLK] = &gcc_usb30_mock_utmi_clk.clkr,
+ [GCC_USB3_PHY_AUX_CLK] = &gcc_usb3_phy_aux_clk.clkr,
+ [GCC_USB_HS_SYSTEM_CLK] = &gcc_usb_hs_system_clk.clkr,
+};
+
+static const struct regmap_config gcc_msm8994_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x2000,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc gcc_msm8994_desc = {
+ .config = &gcc_msm8994_regmap_config,
+ .clks = gcc_msm8994_clocks,
+ .num_clks = ARRAY_SIZE(gcc_msm8994_clocks),
+};
+
+static const struct of_device_id gcc_msm8994_match_table[] = {
+ { .compatible = "qcom,gcc-msm8994" },
+ {}
+}
+
+MODULE_DEVICE_TABLE(of, gcc_msm8994_match_table);
+
+static int gcc_msm8994_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct clk *clk;
+
+ clk = devm_clk_register(dev, &xo.hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ return qcom_cc_probe(pdev, &gcc_msm8994_desc);
+}
+
+static struct platform_driver gcc_msm8994_driver = {
+ .probe = gcc_msm8994_probe,
+ .driver = {
+ .name = "gcc-msm8994",
+ .of_match_table = gcc_msm8994_match_table,
+ },
+};
+
+static int __init gcc_msm8994_init(void)
+{
+ return platform_driver_register(&gcc_msm8994_driver);
+}
+core_initcall(gcc_msm8994_init);
+
+static void __exit gcc_msm8994_exit(void)
+{
+ platform_driver_unregister(&gcc_msm8994_driver);
+}
+module_exit(gcc_msm8994_exit);
+
+MODULE_DESCRIPTION("Qualcomm GCC MSM8994 Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:gcc-msm8994");
--
2.9.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH V6 6/6] arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support
From: Jeremy McNicoll @ 2016-11-04 20:56 UTC (permalink / raw)
To: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: robh-DgEjT+Ai2ygdnm+yROfE0A, andy.gross-QSEj5FYQhm4dnm+yROfE0A,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ, mail-LJ92rlH3Dns, arnd-r2nGTMty4D4,
bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
michael.scott-QSEj5FYQhm4dnm+yROfE0A,
jeremymc-H+wXaHxf7aLQT0dZR+AlfA
In-Reply-To: <1478292996-29559-1-git-send-email-jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
From: Bastian Köcher <git-LJ92rlH3Dns@public.gmane.org>
Initial device tree support for Qualcomm MSM8994 SoC and
Huawei Angler / Google Nexus 6P support.
The device tree is based on the Google 3.10 kernel tree.
The device can be booted into the initrd with only one CPU running.
Signed-off-by: Bastian Köcher <mail-LJ92rlH3Dns@public.gmane.org>
[jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org: removed Kconfig, defconfig, move from Huawei to qcom dir]
Signed-off-by: Jeremy McNicoll <jeremymc-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Tested-by: Michael Scott <michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 40 ++++
arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 38 ++++
arch/arm64/boot/dts/qcom/msm8994.dtsi | 216 +++++++++++++++++++++
4 files changed, 295 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8994.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 439e40e..cc0f02d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
new file mode 100644
index 0000000..dfa08f5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -0,0 +1,40 @@
+/* Copyright (c) 2015, Huawei Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+
+/ {
+ model = "Huawei Nexus 6P";
+ compatible = "huawei,angler", "qcom,msm8994";
+ /* required for bootloader to select correct board */
+ qcom,board-id = <8026 0>;
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ serial@f991e000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
new file mode 100644
index 0000000..0e4eea0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+ blsp1_uart2_default: blsp1_uart2_default {
+ pinmux {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart2_sleep: blsp1_uart2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio4", "gpio5";
+ };
+ pinconf {
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
new file mode 100644
index 0000000..f33c41d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -0,0 +1,216 @@
+/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. MSM 8994";
+ compatible = "qcom,msm8994";
+ // msm-id and pmic-id are required by bootloader for
+ // proper selection of dt blob
+ qcom,msm-id = <207 0x20000>;
+ qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 2 0xff08>,
+ <1 3 0xff08>,
+ <1 4 0xff08>,
+ <1 1 0xff08>;
+ };
+
+ soc: soc {
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@f9000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xf9000000 0x1000>,
+ <0xf9002000 0x1000>;
+ };
+
+ timer@f9020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xf9020000 0x1000>;
+
+ frame@f9021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9021000 0x1000>,
+ <0xf9022000 0x1000>;
+ };
+
+ frame@f9023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf9028000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
+
+ msmgpio: pinctrl@fd510000 {
+ compatible = "qcom,msm8994-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ blsp1_uart2: serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clock-names = "core", "iface";
+ clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&clock_gcc GCC_BLSP1_AHB_CLK>;
+ };
+
+ tcsr_mutex_regs: syscon@fd484000 {
+ compatible = "syscon";
+ reg = <0xfd484000 0x2000>;
+ };
+
+ clock_gcc: clock-controller@fc400000 {
+ compatible = "qcom,gcc-msm8994";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0xfc400000 0x2000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ // We expect the bootloader to fill in the reg
+ reg = <0 0 0 0>;
+ };
+
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ smem_mem: smem_region@6a00000 {
+ reg = <0x0 0x6a00000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x80>;
+ #hwlock-cells = <1>;
+ };
+
+ qcom,smem@6a00000 {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+};
+
+
+#include "msm8994-pins.dtsi"
--
2.9.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* Re: device tree verification tools
From: Julia Lawall @ 2016-11-04 21:08 UTC (permalink / raw)
To: Grant Likely
Cc: Frank Rowand, Matt Porter, Behan Webster, Rob Herring,
David Gibson, Pantelis Antoniou,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-spec-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <CACxGe6vFmHRtE+=rJnsWrm7BGqqXBXq8FJq_T0r5deGP5pnCYw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Fri, 4 Nov 2016, Grant Likely wrote:
> On Fri, Nov 4, 2016 at 2:03 PM, Frank Rowand <frowand.list-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > On 07/26/16 13:43, Julia Lawall wrote:
> >> I saw that there will be a microconference on device trees at Linux
> >> Plumbers. Unfortunately, I won't be able to attend, due to another event
> >> at the same time, but I was wondering what is the status of verification
> >> tools for device tree specifications?
> >>
> >> thanks,
> >> julia
> >>
> >
> > Hi Julia,
> >
> > Grant Likely is breathing new life into the verification effort.
>
> Hey Julia,
>
> The status is: there are no verification tools for dt. :-)
>
> I'm /hoping/ to fix that. I've started experimenting with a grammar
> for DT schema and writing a schema validation tool, but this isn't my
> domain of expertise. I could certainly use your insight. You can see
> some of what I've been playing with in this git tree:
>
> https://github.com/glikely/dtgendoc
>
> It is little more than prototype code, and nothing has been formalized
> yet. I'm open to taking other approaches.
Thanks for the pointer. I haven't had a chance to look into it, but I
hope to get to it soon.
julia
>
> Cheers,
> g.
>
>
> >
> > -Frank
>
^ permalink raw reply
* [PATCH v3 1/2] regulator: fixed: dt: Allow an optional over current pin
From: Axel Haslam @ 2016-11-04 21:35 UTC (permalink / raw)
To: broonie-DgEjT+Ai2ygdnm+yROfE0A, girdwood-Re5JQEeQqe8AvxtiuMwx3w,
khilman-rdvid1DuHRBWk0Htik3J/w, nsekhar-l0cyMroinI0,
david-nq/r/kbU++upp/zk7JDF2g, robh+dt-DgEjT+Ai2ygdnm+yROfE0A
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, Axel Haslam,
devicetree-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161104213536.28496-1-ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Add support for an optional over current input pin which
can be used to send an over current event to the regulator
consumer.
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Axel Haslam <ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
Documentation/devicetree/bindings/regulator/fixed-regulator.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 4fae41d..b145abb 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -11,6 +11,7 @@ If this property is missing, the default assumed is Active low.
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
-vin-supply: Input supply name.
+- over-current-gpios: Input gpio that signal an over current condition.
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
@@ -26,6 +27,7 @@ Example:
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 16 0>;
+ over-current-gpios = <&gpio1 18 0>;
startup-delay-us = <70000>;
enable-active-high;
regulator-boot-on;
--
2.10.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
From: Linus Walleij @ 2016-11-04 21:36 UTC (permalink / raw)
To: Tony Lindgren
Cc: Rob Herring, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Jon Hunter, Mark Rutland, Grygorii Strashko, Nishanth Menon,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Linux-OMAP
In-Reply-To: <20161028165338.y5fyavbw5xfxweg3-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
On Fri, Oct 28, 2016 at 6:53 PM, Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> wrote:
> From tony Mon Sep 17 00:00:00 2001
> From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> Date: Tue, 25 Oct 2016 08:33:34 -0700
> Subject: [PATCH] pinctrl: Introduce generic #pinctrl-cells and
> pinctrl_parse_index_with_args
>
> Introduce #pinctrl-cells helper binding and generic helper functions
> pinctrl_count_index_with_args() and pinctrl_parse_index_with_args().
>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
This updated version applied with Rob's ACK.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 2/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,pins
From: Linus Walleij @ 2016-11-04 21:41 UTC (permalink / raw)
To: Tony Lindgren
Cc: Jon Hunter, Mark Rutland, Rob Herring, Grygorii Strashko,
Nishanth Menon, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Linux-OMAP
In-Reply-To: <20161025164538.453-3-tony@atomide.com>
On Tue, Oct 25, 2016 at 6:45 PM, Tony Lindgren <tony@atomide.com> wrote:
> We can now use generic parser. To support the legacy binding without
> #pinctrl-cells, add pcs_quirk_missing_pinctrl_cells() and warn about
> missing #pinctrl-cells.
>
> Let's also update the documentation for struct pcs_soc_data while at it
> as that seems to be out of date.
>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
Patch applied.
> Looking at some make randconfig results, looks like we don't have
> of_add_property() and of_remove_property() exported. Is there some
> reason not to export them?
If there is too much fuzz from the builders we need to think of something.
Yours,
Linus Walleij
^ permalink raw reply
* [PATCH v2 0/11] Add R8A7745/SK-RZG1E board support
From: Sergei Shtylyov @ 2016-11-04 21:42 UTC (permalink / raw)
To: horms, linux-renesas-soc, robh+dt, mark.rutland, devicetree
Cc: magnus.damm, linux, linux-arm-kernel
Hello.
Here's the set of 11 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-201611104-v4.9-rc3' tag plus the R8A7743/SK-RZG1M patch series
posted earlier. I'm adding the device tree support for the R8A7745-based
SK-RZG1E board. The SoC is close to R8A7794 and the board seems identical to the
R8A7794/SILK board. The device tree patches depend on the R8A7745 CPG/MSSR
driver series in order to compile and work.
[01/11] ARM: shmobile: r8a7745: add power domain index macros
[02/11] soc: renesas: rcar-sysc: add R8A7745 support
[03/11] ARM: shmobile: r8a7745: basic SoC support
[04/11] ARM: dts: r8a7745: initial SoC device tree
[05/11] ARM: dts: r8a7745: add SYS-DMAC support
[06/11] ARM: dts: r8a7745: add [H]SCIF{|A|B} support
[07/11] ARM: dts: r8a7745: add Ether support
[08/11] ARM: dts: r8a7745: add IRQC support
[09/11] ARM: shmobile: document SK-RZG1E board
[10/11] ARM: dts: sk-rzg1e: initial device tree
[11/11] ARM: dts: sk-rzg1e: add Ether support
WBR, Sergei
^ permalink raw reply
* [PATCH v2 01/11] ARM: shmobile: r8a7745: add power domain index macros
From: Sergei Shtylyov @ 2016-11-04 21:44 UTC (permalink / raw)
To: horms-/R6kz+dDXgpPR4JQBCEnsQ,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <2368353.xfo5beGC5E-gHKXc3Y1Z8zGSmamagVegGFoWSdPRAKMAL8bYrjMMd8@public.gmane.org>
Add macros usable by the device tree sources to reference R8A7745 SYSC power
domains by index.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
Changes in version 2:
- added Geert's tag.
include/dt-bindings/power/r8a7745-sysc.h | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
Index: renesas/include/dt-bindings/power/r8a7745-sysc.h
===================================================================
--- /dev/null
+++ renesas/include/dt-bindings/power/r8a7745-sysc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7745_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7745_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7745_PD_CA7_CPU0 5
+#define R8A7745_PD_CA7_CPU1 6
+#define R8A7745_PD_SGX 20
+#define R8A7745_PD_CA7_SCU 21
+
+/* Always-on power area */
+#define R8A7745_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A7745_SYSC_H__ */
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v2 02/11] soc: renesas: rcar-sysc: add R8A7745 support
From: Sergei Shtylyov @ 2016-11-04 21:46 UTC (permalink / raw)
To: horms, linux-renesas-soc, robh+dt, mark.rutland, devicetree
In-Reply-To: <2368353.xfo5beGC5E@wasted.cogentembedded.com>
Add support for RZ/G1E (R8A7745) SoC power areas to the R-Car SYSC driver.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 2:
- added Geert's tag.
Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt | 1
drivers/soc/renesas/Makefile | 1
drivers/soc/renesas/r8a7745-sysc.c | 32 ++++++++++
drivers/soc/renesas/rcar-sysc.c | 3
drivers/soc/renesas/rcar-sysc.h | 1
5 files changed, 38 insertions(+)
Index: renesas/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
===================================================================
--- renesas.orig/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ renesas/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -8,6 +8,7 @@ and various coprocessors.
Required properties:
- compatible: Must contain exactly one of the following:
- "renesas,r8a7743-sysc" (RZ/G1M)
+ - "renesas,r8a7745-sysc" (RZ/G1E)
- "renesas,r8a7779-sysc" (R-Car H1)
- "renesas,r8a7790-sysc" (R-Car H2)
- "renesas,r8a7791-sysc" (R-Car M2-W)
Index: renesas/drivers/soc/renesas/Makefile
===================================================================
--- renesas.orig/drivers/soc/renesas/Makefile
+++ renesas/drivers/soc/renesas/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_R8A7795) += rcar-rst.o
obj-$(CONFIG_ARCH_R8A7796) += rcar-rst.o
obj-$(CONFIG_ARCH_R8A7743) += rcar-sysc.o r8a7743-sysc.o
+obj-$(CONFIG_ARCH_R8A7745) += rcar-sysc.o r8a7745-sysc.o
obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o
obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o
obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o
Index: renesas/drivers/soc/renesas/r8a7745-sysc.c
===================================================================
--- /dev/null
+++ renesas/drivers/soc/renesas/r8a7745-sysc.c
@@ -0,0 +1,32 @@
+/*
+ * Renesas RZ/G1E System Controller
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation; of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a7745-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a7745_areas[] __initconst = {
+ { "always-on", 0, 0, R8A7745_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "ca7-scu", 0x100, 0, R8A7745_PD_CA7_SCU, R8A7745_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca7-cpu0", 0x1c0, 0, R8A7745_PD_CA7_CPU0, R8A7745_PD_CA7_SCU,
+ PD_CPU_NOCR },
+ { "ca7-cpu1", 0x1c0, 1, R8A7745_PD_CA7_CPU1, R8A7745_PD_CA7_SCU,
+ PD_CPU_NOCR },
+ { "sgx", 0xc0, 0, R8A7745_PD_SGX, R8A7745_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a7745_sysc_info __initconst = {
+ .areas = r8a7745_areas,
+ .num_areas = ARRAY_SIZE(r8a7745_areas),
+};
Index: renesas/drivers/soc/renesas/rcar-sysc.c
===================================================================
--- renesas.orig/drivers/soc/renesas/rcar-sysc.c
+++ renesas/drivers/soc/renesas/rcar-sysc.c
@@ -278,6 +278,9 @@ static const struct of_device_id rcar_sy
#ifdef CONFIG_ARCH_R8A7743
{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
#endif
+#ifdef CONFIG_ARCH_R8A7745
+ { .compatible = "renesas,r8a7745-sysc", .data = &r8a7745_sysc_info },
+#endif
#ifdef CONFIG_ARCH_R8A7779
{ .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info },
#endif
Index: renesas/drivers/soc/renesas/rcar-sysc.h
===================================================================
--- renesas.orig/drivers/soc/renesas/rcar-sysc.h
+++ renesas/drivers/soc/renesas/rcar-sysc.h
@@ -51,6 +51,7 @@ struct rcar_sysc_info {
};
extern const struct rcar_sysc_info r8a7743_sysc_info;
+extern const struct rcar_sysc_info r8a7745_sysc_info;
extern const struct rcar_sysc_info r8a7779_sysc_info;
extern const struct rcar_sysc_info r8a7790_sysc_info;
extern const struct rcar_sysc_info r8a7791_sysc_info;
^ permalink raw reply
* [PATCH v2 03/11] ARM: shmobile: r8a7745: basic SoC support
From: Sergei Shtylyov @ 2016-11-04 21:49 UTC (permalink / raw)
To: horms-/R6kz+dDXgpPR4JQBCEnsQ,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: magnus.damm-Re5JQEeQqe8AvxtiuMwx3w, linux-lFZ/pmaqli7XmaaqVzeoHQ,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <2368353.xfo5beGC5E-gHKXc3Y1Z8zGSmamagVegGFoWSdPRAKMAL8bYrjMMd8@public.gmane.org>
Add minimal support for the RZ/G1E (R8A7745) SoC.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
Changes in version 2:
- added Geert's tag;
- refreshed the patch.
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
arch/arm/mach-shmobile/Kconfig | 4 ++++
arch/arm/mach-shmobile/setup-rcar-gen2.c | 1 +
3 files changed, 7 insertions(+)
Index: renesas/Documentation/devicetree/bindings/arm/shmobile.txt
===================================================================
--- renesas.orig/Documentation/devicetree/bindings/arm/shmobile.txt
+++ renesas/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -15,6 +15,8 @@ SoCs:
compatible = "renesas,r8a7740"
- RZ/G1M (R8A77430)
compatible = "renesas,r8a7743"
+ - RZ/G1E (R8A77450)
+ compatible = "renesas,r8a7745"
- R-Car M1A (R8A77781)
compatible = "renesas,r8a7778"
- R-Car H1 (R8A77790)
Index: renesas/arch/arm/mach-shmobile/Kconfig
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/Kconfig
+++ renesas/arch/arm/mach-shmobile/Kconfig
@@ -73,6 +73,10 @@ config ARCH_R8A7743
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
+config ARCH_R8A7745
+ bool "RZ/G1E (R8A77450)"
+ select ARCH_RCAR_GEN2
+
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
select ARCH_RCAR_GEN1
Index: renesas/arch/arm/mach-shmobile/setup-rcar-gen2.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ renesas/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -227,6 +227,7 @@ MACHINE_END
static const char * const rz_g1_boards_compat_dt[] __initconst = {
"renesas,r8a7743",
+ "renesas,r8a7745",
NULL,
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 1/4] pinctrl: Introduce generic #pinctrl-cells and pinctrl_parse_index_with_args
From: Linus Walleij @ 2016-11-04 21:50 UTC (permalink / raw)
To: Tony Lindgren
Cc: Jon Hunter, Mark Rutland, Rob Herring, Grygorii Strashko,
Nishanth Menon,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Linux-OMAP
In-Reply-To: <20161103163550.27330-2-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
On Thu, Nov 3, 2016 at 5:35 PM, Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> wrote:
> Introduce #pinctrl-cells helper binding and generic helper functions
> pinctrl_count_index_with_args() and pinctrl_parse_index_with_args().
>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Ooops applied this v2 version instead of the v1.
* kbuild test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> [161103 13:29]:
> In file included from drivers/pinctrl/core.c:36:0:
> >> drivers/pinctrl/devicetree.h:29:14: warning: 'struct of_phandle_args' declared inside parameter list will not be visible outside of this
definition or declaratio
> Hmm maybe we should just include of.h in core.c?
Nah. I just did this:
diff --git a/drivers/pinctrl/devicetree.h b/drivers/pinctrl/devicetree.h
index 7f0a5c4e15ad..c2d1a5505850 100644
--- a/drivers/pinctrl/devicetree.h
+++ b/drivers/pinctrl/devicetree.h
@@ -16,6 +16,8 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+struct of_phandle_args;
+
#ifdef CONFIG_OF
Let's see if it works!
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* Re: [PATCH 2/4] pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,pins
From: Linus Walleij @ 2016-11-04 21:52 UTC (permalink / raw)
To: Tony Lindgren
Cc: Jon Hunter, Mark Rutland, Rob Herring, Grygorii Strashko,
Nishanth Menon, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Linux-OMAP
In-Reply-To: <20161103163550.27330-3-tony@atomide.com>
On Thu, Nov 3, 2016 at 5:35 PM, Tony Lindgren <tony@atomide.com> wrote:
> We can now use generic parser. To support the legacy binding without
> #pinctrl-cells, add pcs_quirk_missing_pinctrl_cells() and warn about
> missing #pinctrl-cells.
>
> Let's also update the documentation for struct pcs_soc_data while at it
> as that seems to be out of date.
>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
This v2 patch applied.
Yours,
Linus Walleij
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox