* Re: [PATCH v10 01/11] remoteproc: st_slim_rproc: add a slimcore rproc driver
From: Vinod Koul @ 2016-11-17 9:52 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Peter Griffin, linux-arm-kernel, linux-kernel, kernel, ohad,
patrice.chotard, lee.jones, dmaengine, devicetree,
linux-remoteproc
In-Reply-To: <20161117063646.GE28340@tuxbot>
On Wed, Nov 16, 2016 at 10:36:46PM -0800, Bjorn Andersson wrote:
> On Sun 13 Nov 21:18 PST 2016, Vinod Koul wrote:
>
> > On Mon, Nov 07, 2016 at 01:57:35PM +0000, Peter Griffin wrote:
> > > >
> > > > As you now make changes to the entire remoteproc Kconfig file, rather
> > > > than simply add a Kconfig symbol we can't bring this in via Vinod's tree
> > > > without providing Linus with a messy merge conflict.
> > > >
> > > > So the remoteproc parts now has to go through my tree.
> > >
> > > OK, I think the best approach is for Vinod to create an immutable
> > > branch with the entire fdma series on, and then both of you merge that branch into
> > > your respective trees.
> >
> > my topic/st_fdma is immutable branch. You cna merge it, if you need a signed
> > tag, please do let me know
> >
>
> Hi Vinod,
>
> It looks like you reverted the wrong Kconfig fix, the one I objected to
> was the change in drivers/remoteproc, not the one in drivers/dma.
>
> The ST_FMDA depends on functions exposed by REMOTEPROC and
> ST_SLIM_REMOTEPROC, the latter in turn depends on REMOTEPROC, which you
> guys made user selectable - and as such should not be selected - but I
> think we should move forward and get everything merged and then we can
> go back and figure out how this should be addressed (or left alone?).
>
> I have merged "topic/st_fdma" into rproc-next, so that I can fix up the
> now broken drivers/remoteproc/Kconfig.
>
> We do however both need to revert the revert or there will be link
> errors if you build the dma driver with remoteproc=n. If you do this I
> can merge the topic once more and we'll keep the set of changes in sync.
Oops my bad, thanks for letting me know. I have reverted this now and
pushing out. Please do let me know if this was fine
Thanks
--
~Vinod
^ permalink raw reply
* Re: [PATCH V8 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
From: Martin Sperl @ 2016-11-17 9:51 UTC (permalink / raw)
To: Eduardo Valentin
Cc: Zhang Rui, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren,
Lee Jones, Eric Anholt, Russell King, Florian Fainelli,
Catalin Marinas, Will Deacon, linux-pm, devicetree,
linux-rpi-kernel, linux-arm-kernel
In-Reply-To: <20161117021107.GA2647@localhost.localdomain>
On 17.11.2016 03:11, Eduardo Valentin wrote:
> Hey Martin,
>
> Very sorry for the late feedback. Not so sure if this one got queued
> already or not. Anyways, just minor questions as follows:
>
> On Wed, Nov 02, 2016 at 10:18:22AM +0000, kernel@martin.sperl.org wrote:
>> From: Martin Sperl <kernel@martin.sperl.org>
>>
>> Add basic thermal driver for bcm2835 SOC.
>>
>> This driver currently relies on the firmware setting up the
>> tsense HW block and does not set it up itself.
>>
>> Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
>> Acked-by: Eric Anholt <eric@anholt.net>
>> Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
>>
...
>> +static int bcm2835_thermal_adc2temp(
>> + const struct bcm2835_thermal_info *info, u32 adc)
>> +{
>> + return info->offset + (adc * info->slope);
>
> Any specific reason we cannot use thermal_zone_params->slope and
> thermal_zone_params->offset?
You could - the patch was just rebased to 4.9 and those slope and
offset just got merged during this cycle.
Do we really need to modify it - the patch has been around since 4.6.
>> +
>> +static int bcm2835_thermal_get_trip_temp(
>> + struct thermal_zone_device *tz, int trip, int *temp)
>> +{
>> + struct bcm2835_thermal_data *data = tz->devdata;
>> + u32 val = readl(data->regs + BCM2835_TS_TSENSCTL);
>> +
>> + /* get the THOLD bits */
>> + val &= BCM2835_TS_TSENSCTL_THOLD_MASK;
>> + val >>= BCM2835_TS_TSENSCTL_THOLD_SHIFT;
>> +
>> + /* if it is zero then use the info value */
>> + if (val)
>
> Is this a read only register or is this driver supposed to program it?
> In which scenario it would be 0? Can this be added as comments?
It is RW, but the Firmware typically sets up the thermal device with the
correct values already - this is just a fallback.
>> +static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz,
>> + int *temp)
>> +{
>> + struct bcm2835_thermal_data *data = tz->devdata;
>> + u32 val = readl(data->regs + BCM2835_TS_TSENSSTAT);
>> +
>> + if (!(val & BCM2835_TS_TSENSSTAT_VALID))
>
> What cases you would get the valid bit not set? Do you need to wait for
> the conversion to finish?
I guess: if you have just enabled the HW-block (which the FW does much
in advance) and start to read the value immediately (before the first
sample period has finished), then this will not be valid.
So do you need another version of the patchset that uses that new API?
Thanks,
Martin
^ permalink raw reply
* Re: [PATCH v2 2/3] drm/bridge: Add ti-tfp410 DVI transmitter driver
From: Laurent Pinchart @ 2016-11-17 9:45 UTC (permalink / raw)
To: Jyri Sarha
Cc: Rob Herring, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
devicetree-u79uwXL29TY76Z2rM5mHXA, airlied-cv59FeDIM0c,
daniel-/w4YWyX8dFk, tomi.valkeinen-l0cyMroinI0,
robdclark-Re5JQEeQqe8AvxtiuMwx3w,
bgolaszewski-rdvid1DuHRBWk0Htik3J/w,
khilman-rdvid1DuHRBWk0Htik3J/w, bcousson-rdvid1DuHRBWk0Htik3J/w
In-Reply-To: <506ba969-d753-d026-5357-3329a750ceaf-l0cyMroinI0@public.gmane.org>
Hi Jyri,
On Wednesday 16 Nov 2016 16:39:28 Jyri Sarha wrote:
> On 11/16/16 15:33, Rob Herring wrote:
> >> +Optional properties
> >>
> >>> + - reg: I2C address. If and only if present the driver node
I assume you meant device node, not driver node ?
> >>> + should be placed into the i2c controller node where the
> >>> + tfp410 i2c is connected to (the current implementation does
> >>> + not yet support this).
> >
> > So this chip can work without programming I guess?
>
> Yes. Just powering it up is enough for most application.
>
> > reg should only be not present if I2C is not connected in the design. It
> > can't be a function of what the driver supports. In otherwords, you
> > can't be moving this node around based on when you add I2C control.
>
> Ok, I'll try to implement a dummy i2c driver at the same time too. I can
> not test anything related to it because I do not have a piece of HW with
> tfp410 i2c wires connected, but it should not matter as long as I am
> able to probe it as a i2c client.
I think that Rob's point was that whether the current implementation supports
this or not is irrelevant from a DT bindings point of view. It should not be
mentioned in the bindings document.
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH] ARM: dts: sunxi: Explicitly enable pull-ups for MMC pins
From: Chen-Yu Tsai @ 2016-11-17 9:34 UTC (permalink / raw)
To: Maxime Ripard
Cc: Chen-Yu Tsai, Linus Walleij, Klaus Goger,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
In the past, all the MMC pins had
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
which was actually a no-op. We were relying on U-boot to set the bias
pull up for us. These properties were removed as part of the fix up to
actually support no bias on the pins. During the transition some boards
experienced regular MMC time-outs during normal operation, while others
completely failed to initialize the SD card.
Given that MMC starts in open-drain mode and the pull-ups are required,
it's best to enable it for all the pin settings.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 1 +
arch/arm/boot/dts/sun5i.dtsi | 1 +
arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++++
arch/arm/boot/dts/sun7i-a20.dtsi | 2 ++
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 3 +++
arch/arm/boot/dts/sun8i-a83t.dtsi | 1 +
arch/arm/boot/dts/sun8i-h3.dtsi | 3 +++
arch/arm/boot/dts/sun9i-a80.dtsi | 3 +++
8 files changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index dae838e4dd9e..ba20b48c0702 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -1023,6 +1023,7 @@
"PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
+ bias-pull-up;
};
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 7ab6b336533e..54170147040f 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -582,6 +582,7 @@
"PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
+ bias-pull-up;
};
mmc2_pins_a: mmc2@0 {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 7ea1116c7c88..20a0331ddfb5 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -547,6 +547,7 @@
"PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
+ bias-pull-up;
};
mmc1_pins_a: mmc1@0 {
@@ -554,6 +555,7 @@
"PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
+ bias-pull-up;
};
mmc2_pins_a: mmc2@0 {
@@ -571,6 +573,7 @@
"PC24";
function = "mmc2";
drive-strength = <30>;
+ bias-pull-up;
};
mmc3_8bit_emmc_pins: mmc3@1 {
@@ -580,6 +583,7 @@
"PC24";
function = "mmc3";
drive-strength = <40>;
+ bias-pull-up;
};
uart0_pins_a: uart0@0 {
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 34d613b0dd73..a1ee4197129a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1179,6 +1179,7 @@
"PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
+ bias-pull-up;
};
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
@@ -1200,6 +1201,7 @@
"PI7", "PI8", "PI9";
function = "mmc3";
drive-strength = <30>;
+ bias-pull-up;
};
ps20_pins_a: ps20@0 {
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index ecb49a5a7615..bc3e936edfcf 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -293,6 +293,7 @@
"PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
+ bias-pull-up;
};
mmc1_pins_a: mmc1@0 {
@@ -300,6 +301,7 @@
"PG3", "PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
+ bias-pull-up;
};
mmc2_8bit_pins: mmc2_8bit {
@@ -309,6 +311,7 @@
"PC15", "PC16";
function = "mmc2";
drive-strength = <30>;
+ bias-pull-up;
};
pwm0_pins: pwm0 {
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 656cdb5f7a88..79eaa7139f43 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -171,6 +171,7 @@
"PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
+ bias-pull-up;
};
uart0_pins_a: uart0@0 {
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 416b825ddb9f..fca66bf2dec5 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -348,6 +348,7 @@
"PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
+ bias-pull-up;
};
mmc0_cd_pin: mmc0_cd_pin@0 {
@@ -361,6 +362,7 @@
"PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
+ bias-pull-up;
};
mmc2_8bit_pins: mmc2_8bit {
@@ -370,6 +372,7 @@
"PC15", "PC16";
function = "mmc2";
drive-strength = <30>;
+ bias-pull-up;
};
spi0_pins: spi0 {
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index b97db1df0803..7231d2c90dde 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -696,6 +696,7 @@
"PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
+ bias-pull-up;
};
mmc1_pins: mmc1 {
@@ -703,6 +704,7 @@
"PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
+ bias-pull-up;
};
mmc2_8bit_pins: mmc2_8bit {
@@ -712,6 +714,7 @@
"PC16";
function = "mmc2";
drive-strength = <30>;
+ bias-pull-up;
};
uart0_pins_a: uart0@0 {
--
2.10.2
^ permalink raw reply related
* Re: [RFC PATCH 0/7] mux controller astraction and iio/i2c muxes
From: Peter Rosin @ 2016-11-17 9:33 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Wolfram Sang, Rob Herring, Mark Rutland, Jonathan Cameron,
Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler,
Arnd Bergmann, Greg Kroah-Hartman,
linux-i2c-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-iio-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1479340111-1259-1-git-send-email-peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
On 2016-11-17 00:48, Peter Rosin wrote:
> Hi!
>
> This is work in progress, I'm asking for early feedback.
Forgot to mention, sorry, but this series depends on some
stuff not in mainline yet (the _available work in iio [1]),
but it is in linux-next.
Cheers,
Peter
[1] Specifically these patches:
51239600074b "iio:core: add a callback to allow drivers to provide _available attributes"
00c5f80c2fad "iio: inkern: add helpers to query available values from channels"
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [RFC PATCH] mfd: dt: Add Aspeed LPC binding
From: Linus Walleij @ 2016-11-17 9:30 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Arnd Bergmann, Lee Jones, Benjamin Herrenschmidt, Joel Stanley,
Rob Herring,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
In-Reply-To: <20161117060633.3837-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
On Thu, Nov 17, 2016 at 7:06 AM, Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org> wrote:
> +* Device tree bindings for the Aspeed LPC Controller
We are going overboard with the lingo sometimes, to the point that we do not
understand how terse things become.
LPC = Low Pin Count, right?
Explain that right here: it is a slow external bus, right?
> +The Aspeed LPC controller contains registers for a variety of functions. Not
> +all registers for a function are contiguous, and some registers are referenced
> +by functions outside the LPC controller.
> +
> +Note that this is separate from the H8S/2168 compatible register set occupying
> +the start of the LPC controller address space.
> +
> +Some significant functions in the LPC controller:
> +
> +* LPC Host Controller
> +* Host Interface Controller
Host interface to what?
> +* iBT Controller
What is iBT?
> +* SuperIO Scratch registers
Again more context please.
With standards documents, either explain everything or provide
pointers for the information.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v4 1/2] drm/bridge: dumb-vga-dac: Support a VDD regulator supply
From: Archit Taneja @ 2016-11-17 9:17 UTC (permalink / raw)
To: Chen-Yu Tsai
Cc: devicetree, linux-kernel, dri-devel, linux-sunxi, Maxime Ripard,
linux-arm-kernel
In-Reply-To: <CAGb2v668A-hFnWy22_DarSSZ6TkvH5=WH-UvaXOFQJBqyKzPXw@mail.gmail.com>
On 11/17/2016 01:25 PM, Chen-Yu Tsai wrote:
> On Thu, Nov 17, 2016 at 3:48 PM, Archit Taneja <architt@codeaurora.org> wrote:
>> Hi,
>>
>> Thanks for the patch.
>>
>>
>> On 11/16/2016 09:12 PM, Chen-Yu Tsai wrote:
>>>
>>> Some dumb VGA DACs are active components which require external power.
>>> Add support for specifying a regulator as its power supply.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> Acked-by: Rob Herring <robh@kernel.org>
>>> ---
>>> .../bindings/display/bridge/dumb-vga-dac.txt | 2 ++
>>> drivers/gpu/drm/bridge/dumb-vga-dac.c | 35
>>> ++++++++++++++++++++++
>>> 2 files changed, 37 insertions(+)
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>> b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>> index 003bc246a270..164cbb15f04c 100644
>>> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>> @@ -16,6 +16,8 @@ graph bindings specified in
>>> Documentation/devicetree/bindings/graph.txt.
>>> - Video port 0 for RGB input
>>> - Video port 1 for VGA output
>>>
>>> +Optional properties:
>>> +- vdd-supply: Power supply for DAC
>>>
>>> Example
>>> -------
>>> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>> b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>> index afec232185a7..15b549f94307 100644
>>> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>> @@ -12,6 +12,7 @@
>>>
>>> #include <linux/module.h>
>>> #include <linux/of_graph.h>
>>> +#include <linux/regulator/consumer.h>
>>>
>>> #include <drm/drmP.h>
>>> #include <drm/drm_atomic_helper.h>
>>> @@ -23,6 +24,7 @@ struct dumb_vga {
>>> struct drm_connector connector;
>>>
>>> struct i2c_adapter *ddc;
>>> + struct regulator *vdd;
>>> };
>>>
>>> static inline struct dumb_vga *
>>> @@ -124,8 +126,32 @@ static int dumb_vga_attach(struct drm_bridge *bridge)
>>> return 0;
>>> }
>>>
>>> +static void dumb_vga_enable(struct drm_bridge *bridge)
>>> +{
>>> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>>> + int ret = 0;
>>> +
>>> + if (vga->vdd)
>>> + ret = regulator_enable(vga->vdd);
>>> +
>>> + if (ret) {
>>> + DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
>>> + return;
>>
>>
>> We don't need this return for now. If you're okay with it, can I fix this
>> and queue to misc?
>
> Yes, please!
pushed to drm-misc.
Thanks,
Archit
>
> Thanks
> ChenYu
>
>>
>> Thanks,
>> Archit
>>
>>
>>> + }
>>> +}
>>> +
>>> +static void dumb_vga_disable(struct drm_bridge *bridge)
>>> +{
>>> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>>> +
>>> + if (vga->vdd)
>>> + regulator_disable(vga->vdd);
>>> +}
>>> +
>>> static const struct drm_bridge_funcs dumb_vga_bridge_funcs = {
>>> .attach = dumb_vga_attach,
>>> + .enable = dumb_vga_enable,
>>> + .disable = dumb_vga_disable,
>>> };
>>>
>>> static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev)
>>> @@ -169,6 +195,15 @@ static int dumb_vga_probe(struct platform_device
>>> *pdev)
>>> return -ENOMEM;
>>> platform_set_drvdata(pdev, vga);
>>>
>>> + vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
>>> + if (IS_ERR(vga->vdd)) {
>>> + ret = PTR_ERR(vga->vdd);
>>> + if (ret == -EPROBE_DEFER)
>>> + return -EPROBE_DEFER;
>>> + vga->vdd = NULL;
>>> + dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
>>> + }
>>> +
>>> vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev);
>>> if (IS_ERR(vga->ddc)) {
>>> if (PTR_ERR(vga->ddc) == -ENODEV) {
>>>
>>
>> --
>> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
>> a Linux Foundation Collaborative Project
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [RFC PATCH] mfd: dt: Add Aspeed LPC binding
From: Arnd Bergmann @ 2016-11-17 9:16 UTC (permalink / raw)
To: Andrew Jeffery
Cc: devicetree, Benjamin Herrenschmidt, Linus Walleij, linux-kernel,
Rob Herring, Joel Stanley, Lee Jones, linux-arm-kernel
In-Reply-To: <20161117060633.3837-1-andrew@aj.id.au>
On Thursday, November 17, 2016 4:36:33 PM CET Andrew Jeffery wrote:
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
>
> I'd like to start a discussion about how to handle the LPC register space in
> the Aspeed SoC. There are a number of issues, largely concerned with the layout
> of the registers but also with the fact that LPC register state is used by the
> pinmux to determine some pin functionality.
...
>
> What is the recommended approach to managing such hardware?
Can you clarify which side of the LPC bus this is? We are currently having
a discussion for how to integrate the LPC master on an ARM64 server that
uses LPC to access an Aspeed LPC slave. For this one we want to use the
traditional ISA DT binding.
I'm guessing that you are interesting in the other side here, for mapping
the registers of the LPC slave on the Aspeed BMC, but that's not clear from
your email, as I'm assuming that the same chip has both master and slave
interfaces.
Arnd
^ permalink raw reply
* Re: [PATCH v2 3/3] remoteproc: qcom: add Venus video core firmware loader driver
From: Stanimir Varbanov @ 2016-11-17 9:08 UTC (permalink / raw)
To: Stephen Boyd, Stanimir Varbanov
Cc: Ohad Ben-Cohen, Bjorn Andersson, Andy Gross, Rob Herring,
Mark Rutland, Srinivas Kandagatla, linux-remoteproc, linux-kernel,
linux-arm-msm, linux-soc, devicetree
In-Reply-To: <20161114191641.GH5177@codeaurora.org>
Hi,
On 11/14/2016 09:16 PM, Stephen Boyd wrote:
> On 11/07, Stanimir Varbanov wrote:
>> +#include <linux/module.h>
>> +#include <linux/of_reserved_mem.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/qcom_scm.h>
>> +#include <linux/remoteproc.h>
>> +
>> +#include "qcom_mdt_loader.h"
>> +#include "remoteproc_internal.h"
>> +
>> +#define VENUS_CRASH_REASON_SMEM 425
>
> This is unused. Is there going to be some common smem API to get
> the crash reason?
This is leftover and never used, so I will delete it. About smem maybe
Bjorn have some idea?
>> +
>> +static const struct of_device_id venus_of_match[] = {
>> + { .compatible = "qcom,venus-pil" },
>> + { },
>> +};
>
> Add a MODULE_DEVICE_TABLE?
>
OK.
--
regards,
Stan
^ permalink raw reply
* [PATCH 2/2] arm64: dts: updated sata node on ls1046a dts
From: yuantian.tang @ 2016-11-17 7:59 UTC (permalink / raw)
To: tj
Cc: robh+dt, mark.rutland, catalin.marinas, will.deacon, shawnguo,
linux-ide, devicetree, linux-kernel, linux-arm-kernel,
Tang Yuantian, Tang Yuantian
In-Reply-To: <1479369560-9188-1-git-send-email-yuantian.tang@nxp.com>
From: Tang Yuantian <Yuantian.Tang@nxp.com>
On ls1046a soc, sata ecc should be disabled. So added sata ecc
register address so that driver can get this information.
Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 38806ca..88aaaf1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -507,7 +507,9 @@
sata: sata@3200000 {
compatible = "fsl,ls1046a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000>;
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20140520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
};
--
2.1.0.27.g96db324
^ permalink raw reply related
* [PATCH 1/2] dt-bindings: ahci-fsl-qoriq: added explanation for reg-names
From: yuantian.tang @ 2016-11-17 7:59 UTC (permalink / raw)
To: tj
Cc: robh+dt, mark.rutland, catalin.marinas, will.deacon, shawnguo,
linux-ide, devicetree, linux-kernel, linux-arm-kernel,
Tang Yuantian, Tang Yuantian
From: Tang Yuantian <Yuantian.Tang@nxp.com>
Added explanation for reg-names to make it more clear.
Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
---
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
index fc33ca0..80cf10c 100644
--- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
@@ -10,6 +10,8 @@ Required properties:
Optional properties:
- dma-coherent: Enable AHCI coherent DMA operation.
- reg-names: register area names when there are more than 1 register area.
+ example: 'ahci' is for sata controller register.
+ 'sata-ecc' is for sata ecc register.
Examples:
sata@3200000 {
--
2.1.0.27.g96db324
^ permalink raw reply related
* Re: [PATCH v4 1/2] drm/bridge: dumb-vga-dac: Support a VDD regulator supply
From: Chen-Yu Tsai @ 2016-11-17 7:55 UTC (permalink / raw)
To: Archit Taneja
Cc: Chen-Yu Tsai, Maxime Ripard, David Airlie, dri-devel,
linux-arm-kernel, linux-kernel, devicetree, linux-sunxi
In-Reply-To: <31b8b5b9-9621-286a-7649-cc999ab020da-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
On Thu, Nov 17, 2016 at 3:48 PM, Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> wrote:
> Hi,
>
> Thanks for the patch.
>
>
> On 11/16/2016 09:12 PM, Chen-Yu Tsai wrote:
>>
>> Some dumb VGA DACs are active components which require external power.
>> Add support for specifying a regulator as its power supply.
>>
>> Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
>> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> ---
>> .../bindings/display/bridge/dumb-vga-dac.txt | 2 ++
>> drivers/gpu/drm/bridge/dumb-vga-dac.c | 35
>> ++++++++++++++++++++++
>> 2 files changed, 37 insertions(+)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>> b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>> index 003bc246a270..164cbb15f04c 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>> @@ -16,6 +16,8 @@ graph bindings specified in
>> Documentation/devicetree/bindings/graph.txt.
>> - Video port 0 for RGB input
>> - Video port 1 for VGA output
>>
>> +Optional properties:
>> +- vdd-supply: Power supply for DAC
>>
>> Example
>> -------
>> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c
>> b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>> index afec232185a7..15b549f94307 100644
>> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
>> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>> @@ -12,6 +12,7 @@
>>
>> #include <linux/module.h>
>> #include <linux/of_graph.h>
>> +#include <linux/regulator/consumer.h>
>>
>> #include <drm/drmP.h>
>> #include <drm/drm_atomic_helper.h>
>> @@ -23,6 +24,7 @@ struct dumb_vga {
>> struct drm_connector connector;
>>
>> struct i2c_adapter *ddc;
>> + struct regulator *vdd;
>> };
>>
>> static inline struct dumb_vga *
>> @@ -124,8 +126,32 @@ static int dumb_vga_attach(struct drm_bridge *bridge)
>> return 0;
>> }
>>
>> +static void dumb_vga_enable(struct drm_bridge *bridge)
>> +{
>> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>> + int ret = 0;
>> +
>> + if (vga->vdd)
>> + ret = regulator_enable(vga->vdd);
>> +
>> + if (ret) {
>> + DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
>> + return;
>
>
> We don't need this return for now. If you're okay with it, can I fix this
> and queue to misc?
Yes, please!
Thanks
ChenYu
>
> Thanks,
> Archit
>
>
>> + }
>> +}
>> +
>> +static void dumb_vga_disable(struct drm_bridge *bridge)
>> +{
>> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>> +
>> + if (vga->vdd)
>> + regulator_disable(vga->vdd);
>> +}
>> +
>> static const struct drm_bridge_funcs dumb_vga_bridge_funcs = {
>> .attach = dumb_vga_attach,
>> + .enable = dumb_vga_enable,
>> + .disable = dumb_vga_disable,
>> };
>>
>> static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev)
>> @@ -169,6 +195,15 @@ static int dumb_vga_probe(struct platform_device
>> *pdev)
>> return -ENOMEM;
>> platform_set_drvdata(pdev, vga);
>>
>> + vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
>> + if (IS_ERR(vga->vdd)) {
>> + ret = PTR_ERR(vga->vdd);
>> + if (ret == -EPROBE_DEFER)
>> + return -EPROBE_DEFER;
>> + vga->vdd = NULL;
>> + dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
>> + }
>> +
>> vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev);
>> if (IS_ERR(vga->ddc)) {
>> if (PTR_ERR(vga->ddc) == -ENODEV) {
>>
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
^ permalink raw reply
* Re: [PATCHv2 05/10] mmc: dw_mmc: call the dw_mci_prep_stop_abort() by default
From: Shawn Lin @ 2016-11-17 7:49 UTC (permalink / raw)
To: Jaehoon Chung, linux-mmc-u79uwXL29TY76Z2rM5mHXA
Cc: shawn.lin-TNX95d0MmH7DzftRWevZcw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
ulf.hansson-QSEj5FYQhm4dnm+yROfE0A, heiko-4mtYJXux2i+zQB+pC5nmwQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A
In-Reply-To: <868dbb62-4b0d-3492-0b13-093ce63c5cde-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
在 2016/11/17 13:05, Jaehoon Chung 写道:
> On 11/16/2016 06:16 PM, Shawn Lin wrote:
>> 在 2016/11/15 18:12, Jaehoon Chung 写道:
>>> stop_cmdr should be set to values relevant to stop command.
>>> It migth be assigned to values whatever there is mrq->stop or not.
>>> Then it doesn't need to use dw_mci_prepare_command().
>>> It's enough to use the prep_stop_abort for preparing stop command.
>>>
>>
>> Have you considered to clean up the logic of preparing abort cmd
>> within dw_mci_prepare_command?
>
> I have considered this..but i didn't check fully for this logic.
> I think it's possible to clean and make more simpler than now.
>
> how about thinking more after applying these patch-set? :)
it's okay :)
>
> Best Regards,
> Jaehoon Chung
>
>>
>>
>> if (cmd->opcode == MMC_STOP_TRANSMISSION ||
>> cmd->opcode == MMC_GO_IDLE_STATE ||
>> cmd->opcode == MMC_GO_INACTIVE_STATE ||
>> (cmd->opcode == SD_IO_RW_DIRECT &&
>> ((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT))
>> cmdr |= SDMMC_CMD_STOP;
>>
>>
>>> Signed-off-by: Jaehoon Chung <jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>>> Tested-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
>>> ---
>>> drivers/mmc/host/dw_mmc.c | 15 +++++----------
>>> 1 file changed, 5 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>> index 3cda68c..12e1107 100644
>>> --- a/drivers/mmc/host/dw_mmc.c
>>> +++ b/drivers/mmc/host/dw_mmc.c
>>> @@ -385,7 +385,7 @@ static void dw_mci_start_command(struct dw_mci *host,
>>>
>>> static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
>>> {
>>> - struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort;
>>> + struct mmc_command *stop = &host->stop_abort;
>>>
>>> dw_mci_start_command(host, stop, host->stop_cmdr);
>>> }
>>> @@ -1277,10 +1277,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
>>> spin_unlock_irqrestore(&host->irq_lock, irqflags);
>>> }
>>>
>>> - if (mrq->stop)
>>> - host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
>>> - else
>>> - host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
>>> + host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
>>> }
>>>
>>> static void dw_mci_start_request(struct dw_mci *host,
>>> @@ -1890,8 +1887,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
>>> if (test_and_clear_bit(EVENT_DATA_ERROR,
>>> &host->pending_events)) {
>>> dw_mci_stop_dma(host);
>>> - if (data->stop ||
>>> - !(host->data_status & (SDMMC_INT_DRTO |
>>> + if (!(host->data_status & (SDMMC_INT_DRTO |
>>> SDMMC_INT_EBE)))
>>> send_stop_abort(host, data);
>>> state = STATE_DATA_ERROR;
>>> @@ -1927,8 +1923,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
>>> if (test_and_clear_bit(EVENT_DATA_ERROR,
>>> &host->pending_events)) {
>>> dw_mci_stop_dma(host);
>>> - if (data->stop ||
>>> - !(host->data_status & (SDMMC_INT_DRTO |
>>> + if (!(host->data_status & (SDMMC_INT_DRTO |
>>> SDMMC_INT_EBE)))
>>> send_stop_abort(host, data);
>>> state = STATE_DATA_ERROR;
>>> @@ -2004,7 +1999,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
>>> host->cmd = NULL;
>>> host->data = NULL;
>>>
>>> - if (mrq->stop)
>>> + if (!mrq->sbc && mrq->stop)
>>> dw_mci_command_complete(host, mrq->stop);
>>> else
>>> host->cmd_status = 0;
>>>
>>
>>
>
>
>
>
--
Best Regards
Shawn Lin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v4 1/2] drm/bridge: dumb-vga-dac: Support a VDD regulator supply
From: Archit Taneja @ 2016-11-17 7:48 UTC (permalink / raw)
To: Chen-Yu Tsai, Maxime Ripard, David Airlie
Cc: devicetree, linux-sunxi, linux-arm-kernel, dri-devel,
linux-kernel
In-Reply-To: <20161116154232.872-2-wens@csie.org>
Hi,
Thanks for the patch.
On 11/16/2016 09:12 PM, Chen-Yu Tsai wrote:
> Some dumb VGA DACs are active components which require external power.
> Add support for specifying a regulator as its power supply.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> .../bindings/display/bridge/dumb-vga-dac.txt | 2 ++
> drivers/gpu/drm/bridge/dumb-vga-dac.c | 35 ++++++++++++++++++++++
> 2 files changed, 37 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
> index 003bc246a270..164cbb15f04c 100644
> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
> @@ -16,6 +16,8 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> - Video port 0 for RGB input
> - Video port 1 for VGA output
>
> +Optional properties:
> +- vdd-supply: Power supply for DAC
>
> Example
> -------
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index afec232185a7..15b549f94307 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -12,6 +12,7 @@
>
> #include <linux/module.h>
> #include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
>
> #include <drm/drmP.h>
> #include <drm/drm_atomic_helper.h>
> @@ -23,6 +24,7 @@ struct dumb_vga {
> struct drm_connector connector;
>
> struct i2c_adapter *ddc;
> + struct regulator *vdd;
> };
>
> static inline struct dumb_vga *
> @@ -124,8 +126,32 @@ static int dumb_vga_attach(struct drm_bridge *bridge)
> return 0;
> }
>
> +static void dumb_vga_enable(struct drm_bridge *bridge)
> +{
> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
> + int ret = 0;
> +
> + if (vga->vdd)
> + ret = regulator_enable(vga->vdd);
> +
> + if (ret) {
> + DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
> + return;
We don't need this return for now. If you're okay with it, can I fix this
and queue to misc?
Thanks,
Archit
> + }
> +}
> +
> +static void dumb_vga_disable(struct drm_bridge *bridge)
> +{
> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
> +
> + if (vga->vdd)
> + regulator_disable(vga->vdd);
> +}
> +
> static const struct drm_bridge_funcs dumb_vga_bridge_funcs = {
> .attach = dumb_vga_attach,
> + .enable = dumb_vga_enable,
> + .disable = dumb_vga_disable,
> };
>
> static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev)
> @@ -169,6 +195,15 @@ static int dumb_vga_probe(struct platform_device *pdev)
> return -ENOMEM;
> platform_set_drvdata(pdev, vga);
>
> + vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
> + if (IS_ERR(vga->vdd)) {
> + ret = PTR_ERR(vga->vdd);
> + if (ret == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + vga->vdd = NULL;
> + dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
> + }
> +
> vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev);
> if (IS_ERR(vga->ddc)) {
> if (PTR_ERR(vga->ddc) == -ENODEV) {
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* [PATCH v8 3/3] clocksource: Add clockevent support to NPS400 driver
From: Noam Camus @ 2016-11-17 7:12 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A
Cc: tglx-hfZtesqFncYOwBW4kG4KsQ, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Vineet.Gupta1-HKixBCOQz3hWk0Htik3J/w,
Alexey.Brodkin-HKixBCOQz3hWk0Htik3J/w, Noam Camus
From: Noam Camus <noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Till now we used clockevent from generic ARC driver.
This was enough as long as we worked with simple multicore SoC.
When we are working with multithread SoC each HW thread can be
scheduled to receive timer interrupt using timer mask register.
This patch will provide a way to control clock events per HW thread.
The design idea is that for each core there is dedicated register
(TSI) serving all 16 HW threads.
The register is a bitmask with one bit for each HW thread.
When HW thread wants that next expiration of timer interrupt will
hit it then the proper bit should be set in this dedicated register.
When timer expires all HW threads within this core which their bit
is set at the TSI register will be interrupted.
Driver can be used from device tree by:
compatible = "ezchip,nps400-timer0" <-- for clocksource
compatible = "ezchip,nps400-timer1" <-- for clockevent
Note that name convention for timer0/timer1 was taken from legacy
ARC design. This design is our base before adding HW threads.
For backward compatibility we keep "ezchip,nps400-timer" for clocksource
Signed-off-by: Noam Camus <noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Acked-by: Daniel Lezcano <daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../bindings/timer/ezchip,nps400-timer.txt | 15 --
.../bindings/timer/ezchip,nps400-timer0.txt | 17 ++
.../bindings/timer/ezchip,nps400-timer1.txt | 15 ++
drivers/clocksource/timer-nps.c | 170 ++++++++++++++++++++
4 files changed, 202 insertions(+), 15 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt
create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt
diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
deleted file mode 100644
index c8c03d7..0000000
--- a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-NPS Network Processor
-
-Required properties:
-
-- compatible : should be "ezchip,nps400-timer"
-
-Clocks required for compatible = "ezchip,nps400-timer":
-- clocks : Must contain a single entry describing the clock input
-
-Example:
-
-timer {
- compatible = "ezchip,nps400-timer";
- clocks = <&sysclk>;
-};
diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt
new file mode 100644
index 0000000..e3cfce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt
@@ -0,0 +1,17 @@
+NPS Network Processor
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-timer0"
+
+Clocks required for compatible = "ezchip,nps400-timer0":
+- interrupts : The interrupt of the first timer
+- clocks : Must contain a single entry describing the clock input
+
+Example:
+
+timer {
+ compatible = "ezchip,nps400-timer0";
+ interrupts = <3>;
+ clocks = <&sysclk>;
+};
diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt
new file mode 100644
index 0000000..c0ab419
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt
@@ -0,0 +1,15 @@
+NPS Network Processor
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-timer1"
+
+Clocks required for compatible = "ezchip,nps400-timer1":
+- clocks : Must contain a single entry describing the clock input
+
+Example:
+
+timer {
+ compatible = "ezchip,nps400-timer1";
+ clocks = <&sysclk>;
+};
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
index 0c8e21f..b4c8a02 100644
--- a/drivers/clocksource/timer-nps.c
+++ b/drivers/clocksource/timer-nps.c
@@ -111,3 +111,173 @@ static int __init nps_setup_clocksource(struct device_node *node)
CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
nps_setup_clocksource);
+CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1",
+ nps_setup_clocksource);
+
+#ifdef CONFIG_EZNPS_MTM_EXT
+#include <soc/nps/mtm.h>
+
+/* Timer related Aux registers */
+#define NPS_REG_TIMER0_TSI 0xFFFFF850
+#define NPS_REG_TIMER0_LIMIT 0x23
+#define NPS_REG_TIMER0_CTRL 0x22
+#define NPS_REG_TIMER0_CNT 0x21
+
+/*
+ * Interrupt Enabled (IE) - re-arm the timer
+ * Not Halted (NH) - is cleared when working with JTAG (for debug)
+ */
+#define TIMER0_CTRL_IE BIT(0)
+#define TIMER0_CTRL_NH BIT(1)
+
+static unsigned long nps_timer0_freq;
+static unsigned long nps_timer0_irq;
+
+static void nps_clkevent_rm_thread(void)
+{
+ int thread;
+ unsigned int cflags, enabled_threads;
+
+ hw_schd_save(&cflags);
+
+ enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
+
+ /* remove thread from TSI1 */
+ thread = read_aux_reg(CTOP_AUX_THREAD_ID);
+ enabled_threads &= ~(1 << thread);
+ write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
+
+ /* Acknowledge and if needed re-arm the timer */
+ if (!enabled_threads)
+ write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH);
+ else
+ write_aux_reg(NPS_REG_TIMER0_CTRL,
+ TIMER0_CTRL_IE | TIMER0_CTRL_NH);
+
+ hw_schd_restore(cflags);
+}
+
+static void nps_clkevent_add_thread(unsigned long delta)
+{
+ int thread;
+ unsigned int cflags, enabled_threads;
+
+ hw_schd_save(&cflags);
+
+ /* add thread to TSI1 */
+ thread = read_aux_reg(CTOP_AUX_THREAD_ID);
+ enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
+ enabled_threads |= (1 << thread);
+ write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
+
+ /* set next timer event */
+ write_aux_reg(NPS_REG_TIMER0_LIMIT, delta);
+ write_aux_reg(NPS_REG_TIMER0_CNT, 0);
+ write_aux_reg(NPS_REG_TIMER0_CTRL,
+ TIMER0_CTRL_IE | TIMER0_CTRL_NH);
+
+ hw_schd_restore(cflags);
+}
+
+/*
+ * Whenever anyone tries to change modes, we just mask interrupts
+ * and wait for the next event to get set.
+ */
+static int nps_clkevent_set_state(struct clock_event_device *dev)
+{
+ nps_clkevent_rm_thread();
+ disable_percpu_irq(nps_timer0_irq);
+
+ return 0;
+}
+
+static int nps_clkevent_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ nps_clkevent_add_thread(delta);
+ enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = {
+ .name = "NPS Timer0",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 300,
+ .set_next_event = nps_clkevent_set_next_event,
+ .set_state_oneshot = nps_clkevent_set_state,
+ .set_state_oneshot_stopped = nps_clkevent_set_state,
+ .set_state_shutdown = nps_clkevent_set_state,
+ .tick_resume = nps_clkevent_set_state,
+};
+
+static irqreturn_t timer_irq_handler(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ nps_clkevent_rm_thread();
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static int nps_timer_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device);
+
+ evt->cpumask = cpumask_of(smp_processor_id());
+
+ clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX);
+ enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static int nps_timer_dying_cpu(unsigned int cpu)
+{
+ disable_percpu_irq(nps_timer0_irq);
+ return 0;
+}
+
+static int __init nps_setup_clockevent(struct device_node *node)
+{
+ struct clk *clk;
+ int ret;
+
+ nps_timer0_irq = irq_of_parse_and_map(node, 0);
+ if (nps_timer0_irq <= 0) {
+ pr_err("clockevent: missing irq");
+ return -EINVAL;
+ }
+
+ ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk);
+ if (ret)
+ return ret;
+
+ /* Needs apriori irq_set_percpu_devid() done in intc map function */
+ ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler,
+ "Timer0 (per-cpu-tick)",
+ &nps_clockevent_device);
+ if (ret) {
+ pr_err("Couldn't request irq\n");
+ clk_disable_unprepare(clk);
+ return ret;
+ }
+
+ ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING,
+ "clockevents/nps:starting",
+ nps_timer_starting_cpu,
+ nps_timer_dying_cpu);
+ if (ret) {
+ pr_err("Failed to setup hotplug state");
+ clk_disable_unprepare(clk);
+ free_percpu_irq(nps_timer0_irq, &nps_clockevent_device);
+ return ret;
+ }
+
+ return 0;
+}
+
+CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0",
+ nps_setup_clockevent);
+#endif /* CONFIG_EZNPS_MTM_EXT */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* RE: [PATCH v7 3/3] clocksource: Add clockevent support to NPS400 driver
From: Noam Camus @ 2016-11-17 7:12 UTC (permalink / raw)
To: Rob Herring
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org,
daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
In-Reply-To: <20161116134455.dv2fmuh4ot7yjiyc@rob-hp-laptop>
>From: Rob Herring [mailto:robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org]
>Sent: Wednesday, November 16, 2016 3:45 PM
...
>Please add acks when reposting.
>Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Will post [PATCH v8 3/3] with your ack
Thanks
Noam
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v2 2/3] drm/bridge: Add ti-tfp410 DVI transmitter driver
From: Tomi Valkeinen @ 2016-11-17 7:07 UTC (permalink / raw)
To: Jyri Sarha, Rob Herring
Cc: devicetree, bcousson, khilman, dri-devel, bgolaszewski,
laurent.pinchart
In-Reply-To: <506ba969-d753-d026-5357-3329a750ceaf@ti.com>
[-- Attachment #1.1.1: Type: text/plain, Size: 729 bytes --]
On 16/11/16 16:39, Jyri Sarha wrote:
> On 11/16/16 15:33, Rob Herring wrote:
>>> +Optional properties
>>>> + - reg: I2C address. If and only if present the driver node
>>>> + should be placed into the i2c controller node where the
>>>> + tfp410 i2c is connected to (the current implementation does
>>>> + not yet support this).
>> So this chip can work without programming I guess?
>>
>
> Yes. Just powering it up is enough for most application.
Right, and not only that, but in all the TI boards I have seen TFP410's
i2c pins are not even connected. The data sheet says "[TFP410] can be
controlled in two ways: 1) configuration and state pins or 2) the
programmable I2C serial interface".
Tomi
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH v10 01/11] remoteproc: st_slim_rproc: add a slimcore rproc driver
From: Bjorn Andersson @ 2016-11-17 6:36 UTC (permalink / raw)
To: Vinod Koul
Cc: Peter Griffin, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
kernel-F5mvAk5X5gdBDgjK7y7TUQ, ohad-Ix1uc/W3ht7QT0dZR+AlfA,
patrice.chotard-qxv4g6HH51o, lee.jones-QSEj5FYQhm4dnm+yROfE0A,
dmaengine-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-remoteproc-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161114051854.GW3000@localhost>
On Sun 13 Nov 21:18 PST 2016, Vinod Koul wrote:
> On Mon, Nov 07, 2016 at 01:57:35PM +0000, Peter Griffin wrote:
> > >
> > > As you now make changes to the entire remoteproc Kconfig file, rather
> > > than simply add a Kconfig symbol we can't bring this in via Vinod's tree
> > > without providing Linus with a messy merge conflict.
> > >
> > > So the remoteproc parts now has to go through my tree.
> >
> > OK, I think the best approach is for Vinod to create an immutable
> > branch with the entire fdma series on, and then both of you merge that branch into
> > your respective trees.
>
> my topic/st_fdma is immutable branch. You cna merge it, if you need a signed
> tag, please do let me know
>
Hi Vinod,
It looks like you reverted the wrong Kconfig fix, the one I objected to
was the change in drivers/remoteproc, not the one in drivers/dma.
The ST_FMDA depends on functions exposed by REMOTEPROC and
ST_SLIM_REMOTEPROC, the latter in turn depends on REMOTEPROC, which you
guys made user selectable - and as such should not be selected - but I
think we should move forward and get everything merged and then we can
go back and figure out how this should be addressed (or left alone?).
I have merged "topic/st_fdma" into rproc-next, so that I can fix up the
now broken drivers/remoteproc/Kconfig.
We do however both need to revert the revert or there will be link
errors if you build the dma driver with remoteproc=n. If you do this I
can merge the topic once more and we'll keep the set of changes in sync.
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [RFC PATCH] mfd: dt: Add Aspeed LPC binding
From: Andrew Jeffery @ 2016-11-17 6:06 UTC (permalink / raw)
To: Arnd Bergmann, Lee Jones, Linus Walleij
Cc: Benjamin Herrenschmidt, Joel Stanley, Rob Herring,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Andrew Jeffery
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
---
I'd like to start a discussion about how to handle the LPC register space in
the Aspeed SoC. There are a number of issues, largely concerned with the layout
of the registers but also with the fact that LPC register state is used by the
pinmux to determine some pin functionality.
So the register layout is problematic. Registers for what I think are coherent
pieces of functionality functionality are littered through the layout: Post
Code Control registers (PCCR) are interleaved with LPC Host Controller
registers (LHCR) which are interleaved with Host Interface Controller registers
(HICR) which are segmented by LPC Snoop registers. It seems appropriate that
the whole thing is represented as an MFD syscon, with the alternative being
writing several distinct drivers that map some number of resources to access
all of their registers.
The disadvantage of not representing the LPC space as a syscon is the LPC Host
Controller driver will need to provide accessor functions for the pinmux
driver. Pinmux also depends on bits in the Display Controller, and would need
similar accessors provided there. The idea of using syscon regmaps removes the
need to write these accessors. If the changes between the AST2400 and AST2500
are anything to go by, the pinmux complexity of the SoCs will only increase
which will likely lead to the spread of these accessor functions.
Yet another option would be to only expose the LPC Host Controller as a syscon
instead of the whole LPC register space. I feel this is a little distasteful
as the LHCRs are not in contiguous memory space; as mentioned above they are
separated (seemingly randomly) by a PCCR. We could specify the LPC Host
Controller as a syscon and provide multiple resources: The syscon
implementation consumes the first resource which is what we desire here for use
with pinmux, but the driver would be left to map any subsequent resources. That
feels odd to me, but I'm interested in arguments for it.
We could also map the LPC Host Controller syscon across the offending PCCR, but
then any driver developed for the Post Code Controller would have to take a
reference to the LPC Host Controller regmap. I feel like we might wind up with
a syscon phandle spaghetti across the LPC controller if we use that approach.
Finally, the LPC registers can be divided in two: one set for H8S/2168
compatible LPC functionality, and the rest for Aspeed-specific registers.
Division in two is required if we are going to throw a regmap over the LPC
space as the H8S/2168 registers are 1-byte wide, whilst the Aspeed LPC
registers are 4-bytes. As far as I can tell we can treat them as separate
functionality without any loss; if there is a cross-over in configuration we
can have each phandle the other in the devicetree.
The final complication is the iBT device sits in the Aspeed-specific part of
the LPC controller and has an upstream driver that isn't regmap-capable.
Describing the LPC controller as a syscon will require some changes there, but
I think we can make it work without too much trouble.
What is the recommended approach to managing such hardware?
Cheers,
Andrew
PS: I sent a devicetree binding document out for the LPC Host Controller as
part of a recent pinmux series[1]. As it stands the example in the document
doesn't cover the all the registers relevant to the LPC Host Controller, which
was a motivation for trying to sort the problem out properly.
[1] https://www.spinics.net/lists/arm-kernel/msg540084.html
.../devicetree/bindings/mfd/aspeed-lpc.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
new file mode 100644
index 000000000000..36c8a9e08dc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -0,0 +1,28 @@
+* Device tree bindings for the Aspeed LPC Controller
+
+The Aspeed LPC controller contains registers for a variety of functions. Not
+all registers for a function are contiguous, and some registers are referenced
+by functions outside the LPC controller.
+
+Note that this is separate from the H8S/2168 compatible register set occupying
+the start of the LPC controller address space.
+
+Some significant functions in the LPC controller:
+
+* LPC Host Controller
+* Host Interface Controller
+* iBT Controller
+* SuperIO Scratch registers
+
+Required properties:
+- compatible: "aspeed,ast2500-lpc", "syscon"
+- reg: contains offset/length value of the Aspeed-specific LPC
+ memory region.
+
+Example:
+
+lpc: lpc@1e7890a0 {
+ compatible = "aspeed,ast2500-lpc", "syscon";
+ reg = <0x1e789080 0x1e0>;
+};
+
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* Re: [PATCH v5] drm/mediatek: fixed the calc method of data rate per lane
From: CK Hu @ 2016-11-17 5:36 UTC (permalink / raw)
To: Jitao Shi
Cc: Philipp Zabel, Matthias Brugger, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Ajay Kumar, Inki Dae,
Rahul Sharma, Sean Paul, Vincent Palatin, Andy Yan, Russell King,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w
In-Reply-To: <1479266454-31892-1-git-send-email-jitao.shi-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Hi, Jitao:
On Wed, 2016-11-16 at 11:20 +0800, Jitao Shi wrote:
> Tune dsi frame rate by pixel clock, dsi add some extra signal (i.e.
> Tlpx, Ths-prepare, Ths-zero, Ths-trail,Ths-exit) when enter and exit LP
> mode, those signals will cause h-time larger than normal and reduce FPS.
> So need to multiply a coefficient to offset the extra signal's effect.
> coefficient = ((htotal*bpp/lane_number)+Tlpx+Ths_prep+Ths_zero+
> Ths_trail+Ths_exit)/(htotal*bpp/lane_number)
>
> Signed-off-by: Jitao Shi <jitao.shi-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
It looks good to me.
But this patch conflict with [1] which is one patch of MT2701 series. I
want to apply MT2701 patches first, so please help to refine this patch
based on MT2701 patches.
[1] https://patchwork.kernel.org/patch/9422821/
Regards,
CK
> ---
> Change since v4:
> - tune the calc comment more clear.
> - define the phy timings as constants.
>
> Chnage since v3:
> - wrapp the commit msg.
> - fix alignment of some lines.
>
> Change since v2:
> - move phy timing back to dsi_phy_timconfig.
>
> Change since v1:
> - phy_timing2 and phy_timing3 refer clock cycle time.
> - define values of LPX HS_PRPR HS_ZERO HS_TRAIL TA_GO TA_SURE TA_GET DA_HS_EXIT.
> ---
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCHv2 05/10] mmc: dw_mmc: call the dw_mci_prep_stop_abort() by default
From: Jaehoon Chung @ 2016-11-17 5:05 UTC (permalink / raw)
To: Shawn Lin, linux-mmc-u79uwXL29TY76Z2rM5mHXA
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
ulf.hansson-QSEj5FYQhm4dnm+yROfE0A, heiko-4mtYJXux2i+zQB+pC5nmwQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A
In-Reply-To: <6d7625c0-8588-5d11-7475-38fa611d8614-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
On 11/16/2016 06:16 PM, Shawn Lin wrote:
> 在 2016/11/15 18:12, Jaehoon Chung 写道:
>> stop_cmdr should be set to values relevant to stop command.
>> It migth be assigned to values whatever there is mrq->stop or not.
>> Then it doesn't need to use dw_mci_prepare_command().
>> It's enough to use the prep_stop_abort for preparing stop command.
>>
>
> Have you considered to clean up the logic of preparing abort cmd
> within dw_mci_prepare_command?
I have considered this..but i didn't check fully for this logic.
I think it's possible to clean and make more simpler than now.
how about thinking more after applying these patch-set? :)
Best Regards,
Jaehoon Chung
>
>
> if (cmd->opcode == MMC_STOP_TRANSMISSION ||
> cmd->opcode == MMC_GO_IDLE_STATE ||
> cmd->opcode == MMC_GO_INACTIVE_STATE ||
> (cmd->opcode == SD_IO_RW_DIRECT &&
> ((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT))
> cmdr |= SDMMC_CMD_STOP;
>
>
>> Signed-off-by: Jaehoon Chung <jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> Tested-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
>> ---
>> drivers/mmc/host/dw_mmc.c | 15 +++++----------
>> 1 file changed, 5 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 3cda68c..12e1107 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -385,7 +385,7 @@ static void dw_mci_start_command(struct dw_mci *host,
>>
>> static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
>> {
>> - struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort;
>> + struct mmc_command *stop = &host->stop_abort;
>>
>> dw_mci_start_command(host, stop, host->stop_cmdr);
>> }
>> @@ -1277,10 +1277,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
>> spin_unlock_irqrestore(&host->irq_lock, irqflags);
>> }
>>
>> - if (mrq->stop)
>> - host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
>> - else
>> - host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
>> + host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
>> }
>>
>> static void dw_mci_start_request(struct dw_mci *host,
>> @@ -1890,8 +1887,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
>> if (test_and_clear_bit(EVENT_DATA_ERROR,
>> &host->pending_events)) {
>> dw_mci_stop_dma(host);
>> - if (data->stop ||
>> - !(host->data_status & (SDMMC_INT_DRTO |
>> + if (!(host->data_status & (SDMMC_INT_DRTO |
>> SDMMC_INT_EBE)))
>> send_stop_abort(host, data);
>> state = STATE_DATA_ERROR;
>> @@ -1927,8 +1923,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
>> if (test_and_clear_bit(EVENT_DATA_ERROR,
>> &host->pending_events)) {
>> dw_mci_stop_dma(host);
>> - if (data->stop ||
>> - !(host->data_status & (SDMMC_INT_DRTO |
>> + if (!(host->data_status & (SDMMC_INT_DRTO |
>> SDMMC_INT_EBE)))
>> send_stop_abort(host, data);
>> state = STATE_DATA_ERROR;
>> @@ -2004,7 +1999,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
>> host->cmd = NULL;
>> host->data = NULL;
>>
>> - if (mrq->stop)
>> + if (!mrq->sbc && mrq->stop)
>> dw_mci_command_complete(host, mrq->stop);
>> else
>> host->cmd_status = 0;
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v1 2/4] mailbox: Add iProc mailbox controller driver
From: Jassi Brar @ 2016-11-17 3:40 UTC (permalink / raw)
To: Jonathan Richardson
Cc: Rob Herring, Mark Rutland, Ray Jui, Scott Branden, Jon Mason,
Russell King, Vikram Prakash, Devicetree List,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
BCM Kernel Feedback
In-Reply-To: <1476817238-1226-3-git-send-email-jonathan.richardson-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Hi Jonathan,
On Wed, Oct 19, 2016 at 12:30 AM, Jonathan Richardson
<jonathan.richardson-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote:
> The Broadcom iProc mailbox controller handles all communication with a
> Cortex-M0 MCU processor that provides support for power, clock, and
> reset management.
>
> Tested-by: Jonathan Richardson <jonathan.richardson-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Jonathan Richardson <jonathan.richardson-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Vikram Prakash <vikram.prakash-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Shreesha Rajashekar <shreesha.rajashekar-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Signed-off-by: Jonathan Richardson <jonathan.richardson-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> ---
> drivers/mailbox/Kconfig | 10 +
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/bcm-iproc-mailbox.c | 422 ++++++++++++++++++++++++++++++++++++
> include/linux/bcm_iproc_mailbox.h | 32 +++
>
This should be include/linux/mailbox/bcm_iproc_mailbox.h
> +++ b/drivers/mailbox/bcm-iproc-mailbox.c
> @@ -0,0 +1,422 @@
> +/*
> + * Copyright (C) 2016 Broadcom.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/notifier.h>
> +#include <linux/reboot.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/mailbox_client.h>
>
Need of mailbox_controller.h & client.h is a bad sign.
> +
> +static int iproc_mbox_send_data_m0_imp(struct iproc_mbox *mbox,
> + struct iproc_mbox_msg *msg, int max_retries, int poll_period_us)
> +{
> + unsigned long flags;
> + u32 val;
> + int err = 0;
> + int retries;
> +
> + spin_lock_irqsave(&mbox->lock, flags);
> +
> + dev_dbg(mbox->dev, "Send msg to M0: cmd=0x%x, param=0x%x, wait_ack=%d\n",
> + msg->cmd, msg->param, msg->wait_ack);
> +
> + writel(msg->cmd, mbox->base + IPROC_CRMU_MAILBOX0_OFFSET);
> + writel(msg->param, mbox->base + IPROC_CRMU_MAILBOX1_OFFSET);
> +
> + if (msg->wait_ack) {
> + err = msg->reply_code = -ETIMEDOUT;
> + for (retries = 0; retries < max_retries; retries++) {
> + val = readl(mbox->base + IPROC_CRMU_MAILBOX0_OFFSET);
> + if (val & M0_IPC_CMD_DONE_MASK) {
> + /*
> + * M0 replied - save reply code and
> + * clear error.
> + */
> + msg->reply_code = (val &
> + M0_IPC_CMD_REPLY_MASK) >>
> + M0_IPC_CMD_REPLY_SHIFT;
> + err = 0;
> + break;
> + }
> + udelay(poll_period_us);
> + }
> + }
> +
> + spin_unlock_irqrestore(&mbox->lock, flags);
> +
> + return err;
> +}
> +
OK, so this is the real message passing voodoo.
> +static void iproc_mbox_aon_gpio_forwarding_enable(struct iproc_mbox *mbox,
> + bool en)
> +{
> + struct iproc_mbox_msg msg;
> + const int max_retries = 5;
> + const int poll_period_us = 200;
> +
> + msg.cmd = M0_IPC_M0_CMD_AON_GPIO_FORWARDING_ENABLE;
> + msg.param = en ? 1 : 0;
> + msg.wait_ack = true;
> +
> + iproc_mbox_send_data_m0_imp(mbox, &msg, max_retries, poll_period_us);
> +}
> +
> +static void iproc_mbox_irq_unmask(struct irq_data *d)
> +{
> + struct iproc_mbox *iproc_mbox = irq_data_get_irq_chip_data(d);
> +
> + iproc_mbox_aon_gpio_forwarding_enable(iproc_mbox, true);
> +}
> +
> +static void iproc_mbox_irq_mask(struct irq_data *d)
> +{
> + /* Do nothing - Mask callback is not required, since upon GPIO event,
> + * M0 disables GPIO forwarding to A9. Hence, GPIO forwarding is already
> + * disabled when in mbox irq handler, and no other mbox events from M0
> + * to A9 are expected until GPIO forwarding is enabled following
> + * iproc_mbox_irq_unmask()
> + */
> +}
> +
> +static struct irq_chip iproc_mbox_irq_chip = {
> + .name = "bcm-iproc-mbox",
> + .irq_mask = iproc_mbox_irq_mask,
> + .irq_unmask = iproc_mbox_irq_unmask,
> +};
> +
.... these are simply using the mailbox controllers directly. So you
are actually clubbing a mailbox client (interrupt controller) with the
provider (mailbox) here.
I think you need move the IRQ controller part under drivers/irqchip/
that uses the mailbox api to manage its 'irq lines'.
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v6 3/3] arm: dts: mt2701: Add node for Mediatek JPEG Decoder
From: Rick Chang @ 2016-11-17 3:38 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang
In-Reply-To: <1479353915-5043-1-git-send-email-rick.chang@mediatek.com>
Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
---
This patch depends on:
CCF "Add clock support for Mediatek MT2701"[1]
iommu and smi "Add the dtsi node of iommu and smi for mt2701"[2]
[1] http://lists.infradead.org/pipermail/linux-mediatek/2016-October/007271.html
[2] https://patchwork.kernel.org/patch/9164013/
---
arch/arm/boot/dts/mt2701.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 8f13c70..4dd5048 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -298,6 +298,20 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
};
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt2701-vdecsys", "syscon";
reg = <0 0x16000000 0 0x1000>;
--
1.9.1
^ permalink raw reply related
* [PATCH v6 2/3] vcodec: mediatek: Add Mediatek JPEG Decoder Driver
From: Rick Chang @ 2016-11-17 3:38 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang
In-Reply-To: <1479353915-5043-1-git-send-email-rick.chang@mediatek.com>
Add v4l2 driver for Mediatek JPEG Decoder
Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
---
drivers/media/platform/Kconfig | 15 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/mtk-jpeg/Makefile | 2 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 1303 ++++++++++++++++++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 139 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c | 417 +++++++
drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h | 91 ++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c | 160 +++
drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h | 25 +
drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h | 58 +
10 files changed, 2212 insertions(+)
create mode 100644 drivers/media/platform/mtk-jpeg/Makefile
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 754edbf1..96c9887 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -162,6 +162,21 @@ config VIDEO_CODA
Coda is a range of video codec IPs that supports
H.264, MPEG-4, and other video formats.
+config VIDEO_MEDIATEK_JPEG
+ tristate "Mediatek JPEG Codec driver"
+ depends on MTK_IOMMU_V1 || COMPILE_TEST
+ depends on VIDEO_DEV && VIDEO_V4L2
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_DMA
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ ---help---
+ Mediatek jpeg codec driver provides HW capability to decode
+ JPEG format
+
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-jpeg
+
config VIDEO_MEDIATEK_VPU
tristate "Mediatek Video Processor Unit"
depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index f842933..cf701e3 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -68,3 +68,5 @@ obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/
obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec/
obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp/
+
+obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk-jpeg/
diff --git a/drivers/media/platform/mtk-jpeg/Makefile b/drivers/media/platform/mtk-jpeg/Makefile
new file mode 100644
index 0000000..b2e6069
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/Makefile
@@ -0,0 +1,2 @@
+mtk_jpeg-objs := mtk_jpeg_core.o mtk_jpeg_hw.o mtk_jpeg_parse.o
+obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk_jpeg.o
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
new file mode 100644
index 0000000..1101da8
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -0,0 +1,1303 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spinlock.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-dma-contig.h>
+#include <soc/mediatek/smi.h>
+#include <asm/dma-iommu.h>
+
+#include "mtk_jpeg_hw.h"
+#include "mtk_jpeg_core.h"
+#include "mtk_jpeg_parse.h"
+
+static struct mtk_jpeg_fmt mtk_jpeg_formats[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_JPEG,
+ .colplanes = 1,
+ .flags = MTK_JPEG_FMT_FLAG_DEC_OUTPUT,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV420M,
+ .h_sample = {4, 2, 2},
+ .v_sample = {4, 2, 2},
+ .colplanes = 3,
+ .h_align = 5,
+ .v_align = 4,
+ .flags = MTK_JPEG_FMT_FLAG_DEC_CAPTURE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV422M,
+ .h_sample = {4, 2, 2},
+ .v_sample = {4, 4, 4},
+ .colplanes = 3,
+ .h_align = 5,
+ .v_align = 3,
+ .flags = MTK_JPEG_FMT_FLAG_DEC_CAPTURE,
+ },
+};
+
+#define MTK_JPEG_NUM_FORMATS ARRAY_SIZE(mtk_jpeg_formats)
+
+enum {
+ MTK_JPEG_BUF_FLAGS_INIT = 0,
+ MTK_JPEG_BUF_FLAGS_LAST_FRAME = 1,
+};
+
+struct mtk_jpeg_src_buf {
+ struct vb2_v4l2_buffer b;
+ struct list_head list;
+ int flags;
+ struct mtk_jpeg_dec_param dec_param;
+};
+
+static int debug;
+module_param(debug, int, 0644);
+
+static inline struct mtk_jpeg_ctx *mtk_jpeg_fh_to_ctx(struct v4l2_fh *fh)
+{
+ return container_of(fh, struct mtk_jpeg_ctx, fh);
+}
+
+static inline struct mtk_jpeg_src_buf *mtk_jpeg_vb2_to_srcbuf(
+ struct vb2_buffer *vb)
+{
+ return container_of(to_vb2_v4l2_buffer(vb), struct mtk_jpeg_src_buf, b);
+}
+
+static int mtk_jpeg_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct mtk_jpeg_dev *jpeg = video_drvdata(file);
+
+ strlcpy(cap->driver, MTK_JPEG_NAME " decoder", sizeof(cap->driver));
+ strlcpy(cap->card, MTK_JPEG_NAME " decoder", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+ dev_name(jpeg->dev));
+
+ return 0;
+}
+
+static int mtk_jpeg_enum_fmt(struct mtk_jpeg_fmt *mtk_jpeg_formats, int n,
+ struct v4l2_fmtdesc *f, u32 type)
+{
+ int i, num = 0;
+
+ for (i = 0; i < n; ++i) {
+ if (mtk_jpeg_formats[i].flags & type) {
+ if (num == f->index)
+ break;
+ ++num;
+ }
+ }
+
+ if (i >= n)
+ return -EINVAL;
+
+ f->pixelformat = mtk_jpeg_formats[i].fourcc;
+
+ return 0;
+}
+
+static int mtk_jpeg_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f,
+ MTK_JPEG_FMT_FLAG_DEC_CAPTURE);
+}
+
+static int mtk_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f,
+ MTK_JPEG_FMT_FLAG_DEC_OUTPUT);
+}
+
+static struct mtk_jpeg_q_data *mtk_jpeg_get_q_data(struct mtk_jpeg_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ if (V4L2_TYPE_IS_OUTPUT(type))
+ return &ctx->out_q;
+ return &ctx->cap_q;
+}
+
+static struct mtk_jpeg_fmt *mtk_jpeg_find_format(struct mtk_jpeg_ctx *ctx,
+ u32 pixelformat,
+ unsigned int fmt_type)
+{
+ unsigned int k, fmt_flag;
+
+ fmt_flag = (fmt_type == MTK_JPEG_FMT_TYPE_OUTPUT) ?
+ MTK_JPEG_FMT_FLAG_DEC_OUTPUT :
+ MTK_JPEG_FMT_FLAG_DEC_CAPTURE;
+
+ for (k = 0; k < MTK_JPEG_NUM_FORMATS; k++) {
+ struct mtk_jpeg_fmt *fmt = &mtk_jpeg_formats[k];
+
+ if (fmt->fourcc == pixelformat && fmt->flags & fmt_flag)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static void mtk_jpeg_bound_align_image(u32 *w, unsigned int wmin,
+ unsigned int wmax, unsigned int walign,
+ u32 *h, unsigned int hmin,
+ unsigned int hmax, unsigned int halign)
+{
+ int width, height, w_step, h_step;
+
+ width = *w;
+ height = *h;
+ w_step = 1 << walign;
+ h_step = 1 << halign;
+
+ v4l_bound_align_image(w, wmin, wmax, walign, h, hmin, hmax, halign, 0);
+ if (*w < width && (*w + w_step) <= wmax)
+ *w += w_step;
+ if (*h < height && (*h + h_step) <= hmax)
+ *h += h_step;
+}
+
+static void mtk_jpeg_adjust_fmt_mplane(struct mtk_jpeg_ctx *ctx,
+ struct v4l2_format *f)
+{
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_q_data *q_data;
+ int i;
+
+ q_data = mtk_jpeg_get_q_data(ctx, f->type);
+
+ pix_mp->width = q_data->w;
+ pix_mp->height = q_data->h;
+ pix_mp->pixelformat = q_data->fmt->fourcc;
+ pix_mp->num_planes = q_data->fmt->colplanes;
+
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ pix_mp->plane_fmt[i].bytesperline = q_data->bytesperline[i];
+ pix_mp->plane_fmt[i].sizeimage = q_data->sizeimage[i];
+ }
+}
+
+static int mtk_jpeg_try_fmt_mplane(struct v4l2_format *f,
+ struct mtk_jpeg_fmt *fmt,
+ struct mtk_jpeg_ctx *ctx, int q_type)
+{
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ int i;
+
+ memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
+ pix_mp->field = V4L2_FIELD_NONE;
+
+ if (ctx->state != MTK_JPEG_INIT) {
+ mtk_jpeg_adjust_fmt_mplane(ctx, f);
+ goto end;
+ }
+
+ pix_mp->num_planes = fmt->colplanes;
+ pix_mp->pixelformat = fmt->fourcc;
+
+ if (q_type == MTK_JPEG_FMT_TYPE_OUTPUT) {
+ struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[0];
+
+ mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH,
+ MTK_JPEG_MAX_WIDTH, 0,
+ &pix_mp->height, MTK_JPEG_MIN_HEIGHT,
+ MTK_JPEG_MAX_HEIGHT, 0);
+
+ memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
+ pfmt->bytesperline = 0;
+ /* Source size must be aligned to 128 */
+ pfmt->sizeimage = mtk_jpeg_align(pfmt->sizeimage, 128);
+ if (pfmt->sizeimage == 0)
+ pfmt->sizeimage = MTK_JPEG_DEFAULT_SIZEIMAGE;
+ goto end;
+ }
+
+ /* type is MTK_JPEG_FMT_TYPE_CAPTURE */
+ mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH,
+ MTK_JPEG_MAX_WIDTH, fmt->h_align,
+ &pix_mp->height, MTK_JPEG_MIN_HEIGHT,
+ MTK_JPEG_MAX_HEIGHT, fmt->v_align);
+
+ for (i = 0; i < fmt->colplanes; i++) {
+ struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[i];
+ u32 stride = pix_mp->width * fmt->h_sample[i] / 4;
+ u32 h = pix_mp->height * fmt->v_sample[i] / 4;
+
+ memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
+ pfmt->bytesperline = stride;
+ pfmt->sizeimage = stride * h;
+ }
+end:
+ v4l2_dbg(2, debug, &jpeg->v4l2_dev, "wxh:%ux%u\n",
+ pix_mp->width, pix_mp->height);
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ v4l2_dbg(2, debug, &jpeg->v4l2_dev,
+ "plane[%d] bpl=%u, size=%u\n",
+ i,
+ pix_mp->plane_fmt[i].bytesperline,
+ pix_mp->plane_fmt[i].sizeimage);
+ }
+ return 0;
+}
+
+static int mtk_jpeg_g_fmt_vid_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct vb2_queue *vq;
+ struct mtk_jpeg_q_data *q_data = NULL;
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ int i;
+
+ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ q_data = mtk_jpeg_get_q_data(ctx, f->type);
+
+ memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
+ pix_mp->width = q_data->w;
+ pix_mp->height = q_data->h;
+ pix_mp->field = V4L2_FIELD_NONE;
+ pix_mp->pixelformat = q_data->fmt->fourcc;
+ pix_mp->num_planes = q_data->fmt->colplanes;
+ pix_mp->colorspace = ctx->colorspace;
+ pix_mp->ycbcr_enc = ctx->ycbcr_enc;
+ pix_mp->xfer_func = ctx->xfer_func;
+ pix_mp->quantization = ctx->quantization;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) g_fmt:%c%c%c%c wxh:%ux%u\n",
+ f->type,
+ (pix_mp->pixelformat & 0xff),
+ (pix_mp->pixelformat >> 8 & 0xff),
+ (pix_mp->pixelformat >> 16 & 0xff),
+ (pix_mp->pixelformat >> 24 & 0xff),
+ pix_mp->width, pix_mp->height);
+
+ for (i = 0; i < pix_mp->num_planes; i++) {
+ struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[i];
+
+ pfmt->bytesperline = q_data->bytesperline[i];
+ pfmt->sizeimage = q_data->sizeimage[i];
+ memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev,
+ "plane[%d] bpl=%u, size=%u\n",
+ i,
+ pfmt->bytesperline,
+ pfmt->sizeimage);
+ }
+ return 0;
+}
+
+static int mtk_jpeg_try_fmt_vid_cap_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct mtk_jpeg_fmt *fmt;
+
+ fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat,
+ MTK_JPEG_FMT_TYPE_CAPTURE);
+ if (!fmt)
+ fmt = ctx->cap_q.fmt;
+
+ v4l2_dbg(2, debug, &ctx->jpeg->v4l2_dev, "(%d) try_fmt:%c%c%c%c\n",
+ f->type,
+ (fmt->fourcc & 0xff),
+ (fmt->fourcc >> 8 & 0xff),
+ (fmt->fourcc >> 16 & 0xff),
+ (fmt->fourcc >> 24 & 0xff));
+
+ return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_CAPTURE);
+}
+
+static int mtk_jpeg_try_fmt_vid_out_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct mtk_jpeg_fmt *fmt;
+
+ fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat,
+ MTK_JPEG_FMT_TYPE_OUTPUT);
+ if (!fmt)
+ fmt = ctx->out_q.fmt;
+
+ v4l2_dbg(2, debug, &ctx->jpeg->v4l2_dev, "(%d) try_fmt:%c%c%c%c\n",
+ f->type,
+ (fmt->fourcc & 0xff),
+ (fmt->fourcc >> 8 & 0xff),
+ (fmt->fourcc >> 16 & 0xff),
+ (fmt->fourcc >> 24 & 0xff));
+
+ return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_OUTPUT);
+}
+
+static int mtk_jpeg_s_fmt_mplane(struct mtk_jpeg_ctx *ctx,
+ struct v4l2_format *f)
+{
+ struct vb2_queue *vq;
+ struct mtk_jpeg_q_data *q_data = NULL;
+ struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ unsigned int f_type;
+ int i;
+
+ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ q_data = mtk_jpeg_get_q_data(ctx, f->type);
+
+ if (vb2_is_busy(vq)) {
+ v4l2_err(&jpeg->v4l2_dev, "queue busy\n");
+ return -EBUSY;
+ }
+
+ f_type = V4L2_TYPE_IS_OUTPUT(f->type) ?
+ MTK_JPEG_FMT_TYPE_OUTPUT : MTK_JPEG_FMT_TYPE_CAPTURE;
+
+ q_data->fmt = mtk_jpeg_find_format(ctx, pix_mp->pixelformat, f_type);
+ q_data->w = pix_mp->width;
+ q_data->h = pix_mp->height;
+ ctx->colorspace = pix_mp->colorspace;
+ ctx->ycbcr_enc = pix_mp->ycbcr_enc;
+ ctx->xfer_func = pix_mp->xfer_func;
+ ctx->quantization = pix_mp->quantization;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) s_fmt:%c%c%c%c wxh:%ux%u\n",
+ f->type,
+ (q_data->fmt->fourcc & 0xff),
+ (q_data->fmt->fourcc >> 8 & 0xff),
+ (q_data->fmt->fourcc >> 16 & 0xff),
+ (q_data->fmt->fourcc >> 24 & 0xff),
+ q_data->w, q_data->h);
+
+ for (i = 0; i < q_data->fmt->colplanes; i++) {
+ q_data->bytesperline[i] = pix_mp->plane_fmt[i].bytesperline;
+ q_data->sizeimage[i] = pix_mp->plane_fmt[i].sizeimage;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev,
+ "plane[%d] bpl=%u, size=%u\n",
+ i, q_data->bytesperline[i], q_data->sizeimage[i]);
+ }
+
+ return 0;
+}
+
+static int mtk_jpeg_s_fmt_vid_out_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ int ret;
+
+ ret = mtk_jpeg_try_fmt_vid_out_mplane(file, priv, f);
+ if (ret)
+ return ret;
+
+ return mtk_jpeg_s_fmt_mplane(mtk_jpeg_fh_to_ctx(priv), f);
+}
+
+static int mtk_jpeg_s_fmt_vid_cap_mplane(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ int ret;
+
+ ret = mtk_jpeg_try_fmt_vid_cap_mplane(file, priv, f);
+ if (ret)
+ return ret;
+
+ return mtk_jpeg_s_fmt_mplane(mtk_jpeg_fh_to_ctx(priv), f);
+}
+
+static void mtk_jpeg_queue_src_chg_event(struct mtk_jpeg_ctx *ctx)
+{
+ static const struct v4l2_event ev_src_ch = {
+ .type = V4L2_EVENT_SOURCE_CHANGE,
+ .u.src_change.changes =
+ V4L2_EVENT_SRC_CH_RESOLUTION,
+ };
+
+ v4l2_event_queue_fh(&ctx->fh, &ev_src_ch);
+}
+
+static int mtk_jpeg_subscribe_event(struct v4l2_fh *fh,
+ const struct v4l2_event_subscription *sub)
+{
+ switch (sub->type) {
+ case V4L2_EVENT_SOURCE_CHANGE:
+ return v4l2_src_change_event_subscribe(fh, sub);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mtk_jpeg_g_selection(struct file *file, void *priv,
+ struct v4l2_selection *s)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+
+ if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_COMPOSE:
+ case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+ s->r.width = ctx->out_q.w;
+ s->r.height = ctx->out_q.h;
+ s->r.left = 0;
+ s->r.top = 0;
+ break;
+ case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+ case V4L2_SEL_TGT_COMPOSE_PADDED:
+ s->r.width = ctx->cap_q.w;
+ s->r.height = ctx->cap_q.h;
+ s->r.left = 0;
+ s->r.top = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int mtk_jpeg_s_selection(struct file *file, void *priv,
+ struct v4l2_selection *s)
+{
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+
+ if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_COMPOSE:
+ s->r.left = 0;
+ s->r.top = 0;
+ s->r.width = ctx->out_q.w;
+ s->r.height = ctx->out_q.h;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int mtk_jpeg_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+ struct v4l2_fh *fh = file->private_data;
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
+ struct vb2_queue *vq;
+ struct vb2_buffer *vb;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+
+ if (buf->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+ goto end;
+
+ vq = v4l2_m2m_get_vq(fh->m2m_ctx, buf->type);
+ if (buf->index >= vq->num_buffers) {
+ dev_err(ctx->jpeg->dev, "buffer index out of range\n");
+ return -EINVAL;
+ }
+
+ vb = vq->bufs[buf->index];
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ jpeg_src_buf->flags = (buf->m.planes[0].bytesused == 0) ?
+ MTK_JPEG_BUF_FLAGS_LAST_FRAME : MTK_JPEG_BUF_FLAGS_INIT;
+end:
+ return v4l2_m2m_qbuf(file, fh->m2m_ctx, buf);
+}
+
+static const struct v4l2_ioctl_ops mtk_jpeg_ioctl_ops = {
+ .vidioc_querycap = mtk_jpeg_querycap,
+ .vidioc_enum_fmt_vid_cap_mplane = mtk_jpeg_enum_fmt_vid_cap,
+ .vidioc_enum_fmt_vid_out_mplane = mtk_jpeg_enum_fmt_vid_out,
+ .vidioc_try_fmt_vid_cap_mplane = mtk_jpeg_try_fmt_vid_cap_mplane,
+ .vidioc_try_fmt_vid_out_mplane = mtk_jpeg_try_fmt_vid_out_mplane,
+ .vidioc_g_fmt_vid_cap_mplane = mtk_jpeg_g_fmt_vid_mplane,
+ .vidioc_g_fmt_vid_out_mplane = mtk_jpeg_g_fmt_vid_mplane,
+ .vidioc_s_fmt_vid_cap_mplane = mtk_jpeg_s_fmt_vid_cap_mplane,
+ .vidioc_s_fmt_vid_out_mplane = mtk_jpeg_s_fmt_vid_out_mplane,
+ .vidioc_qbuf = mtk_jpeg_qbuf,
+ .vidioc_subscribe_event = mtk_jpeg_subscribe_event,
+ .vidioc_g_selection = mtk_jpeg_g_selection,
+ .vidioc_s_selection = mtk_jpeg_s_selection,
+
+ .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
+ .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf,
+ .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs,
+ .vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
+ .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
+ .vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
+ .vidioc_streamon = v4l2_m2m_ioctl_streamon,
+ .vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
+
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static int mtk_jpeg_queue_setup(struct vb2_queue *q,
+ unsigned int *num_buffers,
+ unsigned int *num_planes,
+ unsigned int sizes[],
+ struct device *alloc_ctxs[])
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
+ struct mtk_jpeg_q_data *q_data = NULL;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ int i;
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) buf_req count=%u\n",
+ q->type, *num_buffers);
+
+ q_data = mtk_jpeg_get_q_data(ctx, q->type);
+ if (!q_data)
+ return -EINVAL;
+
+ *num_planes = q_data->fmt->colplanes;
+ for (i = 0; i < q_data->fmt->colplanes; i++) {
+ sizes[i] = q_data->sizeimage[i];
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "sizeimage[%d]=%u\n",
+ i, sizes[i]);
+ }
+
+ return 0;
+}
+
+static int mtk_jpeg_buf_prepare(struct vb2_buffer *vb)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct mtk_jpeg_q_data *q_data = NULL;
+ int i;
+
+ q_data = mtk_jpeg_get_q_data(ctx, vb->vb2_queue->type);
+ if (!q_data)
+ return -EINVAL;
+
+ for (i = 0; i < q_data->fmt->colplanes; i++)
+ vb2_set_plane_payload(vb, i, q_data->sizeimage[i]);
+
+ return 0;
+}
+
+static bool mtk_jpeg_check_resolution_change(struct mtk_jpeg_ctx *ctx,
+ struct mtk_jpeg_dec_param *param)
+{
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct mtk_jpeg_q_data *q_data;
+
+ q_data = &ctx->out_q;
+ if (q_data->w != param->pic_w || q_data->h != param->pic_h) {
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Picture size change\n");
+ return true;
+ }
+
+ q_data = &ctx->cap_q;
+ if (q_data->fmt != mtk_jpeg_find_format(ctx, param->dst_fourcc,
+ MTK_JPEG_FMT_TYPE_CAPTURE)) {
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "format change\n");
+ return true;
+ }
+ return false;
+}
+
+static void mtk_jpeg_set_queue_data(struct mtk_jpeg_ctx *ctx,
+ struct mtk_jpeg_dec_param *param)
+{
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct mtk_jpeg_q_data *q_data;
+ int i;
+
+ q_data = &ctx->out_q;
+ q_data->w = param->pic_w;
+ q_data->h = param->pic_h;
+
+ q_data = &ctx->cap_q;
+ q_data->w = param->dec_w;
+ q_data->h = param->dec_h;
+ q_data->fmt = mtk_jpeg_find_format(ctx,
+ param->dst_fourcc,
+ MTK_JPEG_FMT_TYPE_CAPTURE);
+
+ for (i = 0; i < q_data->fmt->colplanes; i++) {
+ q_data->bytesperline[i] = param->mem_stride[i];
+ q_data->sizeimage[i] = param->comp_size[i];
+ }
+
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev,
+ "set_parse cap:%c%c%c%c pic(%u, %u), buf(%u, %u)\n",
+ (param->dst_fourcc & 0xff),
+ (param->dst_fourcc >> 8 & 0xff),
+ (param->dst_fourcc >> 16 & 0xff),
+ (param->dst_fourcc >> 24 & 0xff),
+ param->pic_w, param->pic_h,
+ param->dec_w, param->dec_h);
+}
+
+static void mtk_jpeg_buf_queue(struct vb2_buffer *vb)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct mtk_jpeg_dec_param *param;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+ bool header_valid;
+
+ v4l2_dbg(2, debug, &jpeg->v4l2_dev, "(%d) buf_q id=%d, vb=%p\n",
+ vb->vb2_queue->type, vb->index, vb);
+
+ if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+ goto end;
+
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ param = &jpeg_src_buf->dec_param;
+ memset(param, 0, sizeof(*param));
+
+ if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
+ v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Got eos\n");
+ goto end;
+ }
+ header_valid = mtk_jpeg_parse(param, (u8 *)vb2_plane_vaddr(vb, 0),
+ vb2_get_plane_payload(vb, 0));
+ if (!header_valid) {
+ v4l2_err(&jpeg->v4l2_dev, "Header invalid.\n");
+ vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+ return;
+ }
+
+ if (ctx->state == MTK_JPEG_INIT) {
+ mtk_jpeg_queue_src_chg_event(ctx);
+ mtk_jpeg_set_queue_data(ctx, param);
+ ctx->state = MTK_JPEG_RUNNING;
+ }
+end:
+ v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, to_vb2_v4l2_buffer(vb));
+}
+
+static void *mtk_jpeg_buf_remove(struct mtk_jpeg_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ if (V4L2_TYPE_IS_OUTPUT(type))
+ return v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ else
+ return v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+}
+
+static int mtk_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
+ struct vb2_buffer *vb;
+ int ret = 0;
+
+ ret = pm_runtime_get_sync(ctx->jpeg->dev);
+ if (ret < 0)
+ goto err;
+
+ return 0;
+err:
+ while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_QUEUED);
+ return ret;
+}
+
+static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
+{
+ struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
+ struct vb2_buffer *vb;
+
+ /*
+ * STREAMOFF is an acknowledgment for source change event.
+ * Before STREAMOFF, we still have to return the old resolution and
+ * subsampling. Update capture queue when the stream is off.
+ */
+ if (ctx->state == MTK_JPEG_SOURCE_CHANGE &&
+ !V4L2_TYPE_IS_OUTPUT(q->type)) {
+ struct mtk_jpeg_src_buf *src_buf;
+
+ vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ mtk_jpeg_set_queue_data(ctx, &src_buf->dec_param);
+ ctx->state = MTK_JPEG_RUNNING;
+ } else if (V4L2_TYPE_IS_OUTPUT(q->type)) {
+ ctx->state = MTK_JPEG_INIT;
+ }
+
+ while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_ERROR);
+
+ pm_runtime_put_sync(ctx->jpeg->dev);
+}
+
+static struct vb2_ops mtk_jpeg_qops = {
+ .queue_setup = mtk_jpeg_queue_setup,
+ .buf_prepare = mtk_jpeg_buf_prepare,
+ .buf_queue = mtk_jpeg_buf_queue,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .start_streaming = mtk_jpeg_start_streaming,
+ .stop_streaming = mtk_jpeg_stop_streaming,
+};
+
+static void mtk_jpeg_set_dec_src(struct mtk_jpeg_ctx *ctx,
+ struct vb2_buffer *src_buf,
+ struct mtk_jpeg_bs *bs)
+{
+ bs->str_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
+ bs->end_addr = bs->str_addr +
+ mtk_jpeg_align(vb2_get_plane_payload(src_buf, 0), 16);
+ bs->size = mtk_jpeg_align(vb2_plane_size(src_buf, 0), 128);
+}
+
+static int mtk_jpeg_set_dec_dst(struct mtk_jpeg_ctx *ctx,
+ struct mtk_jpeg_dec_param *param,
+ struct vb2_buffer *dst_buf,
+ struct mtk_jpeg_fb *fb)
+{
+ int i;
+
+ if (param->comp_num != dst_buf->num_planes) {
+ dev_err(ctx->jpeg->dev, "plane number mismatch (%u != %u)\n",
+ param->comp_num, dst_buf->num_planes);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < dst_buf->num_planes; i++) {
+ if (vb2_plane_size(dst_buf, i) < param->comp_size[i]) {
+ dev_err(ctx->jpeg->dev,
+ "buffer size is underflow (%lu < %u)\n",
+ vb2_plane_size(dst_buf, 0),
+ param->comp_size[i]);
+ return -EINVAL;
+ }
+ fb->plane_addr[i] = vb2_dma_contig_plane_dma_addr(dst_buf, i);
+ }
+
+ return 0;
+}
+
+static void mtk_jpeg_device_run(void *priv)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct vb2_buffer *src_buf, *dst_buf;
+ enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
+ unsigned long flags;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+ struct mtk_jpeg_bs bs;
+ struct mtk_jpeg_fb fb;
+ int i;
+
+ src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf);
+
+ if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
+ for (i = 0; i < dst_buf->num_planes; i++)
+ vb2_set_plane_payload(dst_buf, i, 0);
+ buf_state = VB2_BUF_STATE_DONE;
+ goto dec_end;
+ }
+
+ if (mtk_jpeg_check_resolution_change(ctx, &jpeg_src_buf->dec_param)) {
+ mtk_jpeg_queue_src_chg_event(ctx);
+ ctx->state = MTK_JPEG_SOURCE_CHANGE;
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+ return;
+ }
+
+ mtk_jpeg_set_dec_src(ctx, src_buf, &bs);
+ if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param, dst_buf, &fb))
+ goto dec_end;
+
+ spin_lock_irqsave(&jpeg->hw_lock, flags);
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+ mtk_jpeg_dec_set_config(jpeg->dec_reg_base,
+ &jpeg_src_buf->dec_param, &bs, &fb);
+
+ mtk_jpeg_dec_start(jpeg->dec_reg_base);
+ spin_unlock_irqrestore(&jpeg->hw_lock, flags);
+ return;
+
+dec_end:
+ v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state);
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+}
+
+static int mtk_jpeg_job_ready(void *priv)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+
+ return (ctx->state == MTK_JPEG_RUNNING) ? 1 : 0;
+}
+
+static void mtk_jpeg_job_abort(void *priv)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+ struct mtk_jpeg_dev *jpeg = ctx->jpeg;
+ struct vb2_buffer *src_buf, *dst_buf;
+
+ src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), VB2_BUF_STATE_ERROR);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), VB2_BUF_STATE_ERROR);
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+}
+
+static struct v4l2_m2m_ops mtk_jpeg_m2m_ops = {
+ .device_run = mtk_jpeg_device_run,
+ .job_ready = mtk_jpeg_job_ready,
+ .job_abort = mtk_jpeg_job_abort,
+};
+
+static int mtk_jpeg_queue_init(void *priv, struct vb2_queue *src_vq,
+ struct vb2_queue *dst_vq)
+{
+ struct mtk_jpeg_ctx *ctx = priv;
+ int ret;
+
+ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+ src_vq->io_modes = VB2_DMABUF | VB2_MMAP;
+ src_vq->drv_priv = ctx;
+ src_vq->buf_struct_size = sizeof(struct mtk_jpeg_src_buf);
+ src_vq->ops = &mtk_jpeg_qops;
+ src_vq->mem_ops = &vb2_dma_contig_memops;
+ src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+ src_vq->lock = &ctx->jpeg->lock;
+ src_vq->dev = ctx->jpeg->dev;
+ ret = vb2_queue_init(src_vq);
+ if (ret)
+ return ret;
+
+ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+ dst_vq->io_modes = VB2_DMABUF | VB2_MMAP;
+ dst_vq->drv_priv = ctx;
+ dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+ dst_vq->ops = &mtk_jpeg_qops;
+ dst_vq->mem_ops = &vb2_dma_contig_memops;
+ dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+ dst_vq->lock = &ctx->jpeg->lock;
+ dst_vq->dev = ctx->jpeg->dev;
+ ret = vb2_queue_init(dst_vq);
+
+ return ret;
+}
+
+static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
+{
+ int ret;
+
+ ret = mtk_smi_larb_get(jpeg->larb);
+ if (ret)
+ dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
+ clk_prepare_enable(jpeg->clk_jdec_smi);
+ clk_prepare_enable(jpeg->clk_jdec);
+}
+
+static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
+{
+ clk_disable_unprepare(jpeg->clk_jdec);
+ clk_disable_unprepare(jpeg->clk_jdec_smi);
+ mtk_smi_larb_put(jpeg->larb);
+}
+
+static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
+{
+ struct mtk_jpeg_dev *jpeg = priv;
+ struct mtk_jpeg_ctx *ctx;
+ struct vb2_buffer *src_buf, *dst_buf;
+ struct mtk_jpeg_src_buf *jpeg_src_buf;
+ enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
+ u32 dec_irq_ret;
+ u32 dec_ret;
+ int i;
+
+ ctx = v4l2_m2m_get_curr_priv(jpeg->m2m_dev);
+ if (!ctx) {
+ v4l2_err(&jpeg->v4l2_dev, "Context is NULL\n");
+ return IRQ_HANDLED;
+ }
+
+ src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+ dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf);
+
+ dec_ret = mtk_jpeg_dec_get_int_status(jpeg->dec_reg_base);
+ dec_irq_ret = mtk_jpeg_dec_enum_result(dec_ret);
+
+ if (dec_irq_ret >= MTK_JPEG_DEC_RESULT_UNDERFLOW)
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+
+ if (dec_irq_ret != MTK_JPEG_DEC_RESULT_EOF_DONE) {
+ dev_err(jpeg->dev, "decode failed\n");
+ goto dec_end;
+ }
+
+ for (i = 0; i < dst_buf->num_planes; i++)
+ vb2_set_plane_payload(dst_buf, i,
+ jpeg_src_buf->dec_param.comp_size[i]);
+
+ buf_state = VB2_BUF_STATE_DONE;
+
+dec_end:
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state);
+ v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state);
+ v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
+ return IRQ_HANDLED;
+}
+
+static void mtk_jpeg_set_default_params(struct mtk_jpeg_ctx *ctx)
+{
+ struct mtk_jpeg_q_data *q = &ctx->out_q;
+ int i;
+
+ ctx->colorspace = V4L2_COLORSPACE_JPEG,
+ ctx->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+ ctx->quantization = V4L2_QUANTIZATION_DEFAULT;
+ ctx->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+ q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_JPEG,
+ MTK_JPEG_FMT_TYPE_OUTPUT);
+ q->w = MTK_JPEG_MIN_WIDTH;
+ q->h = MTK_JPEG_MIN_HEIGHT;
+ q->bytesperline[0] = 0;
+ q->sizeimage[0] = MTK_JPEG_DEFAULT_SIZEIMAGE;
+
+ q = &ctx->cap_q;
+ q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_YUV420M,
+ MTK_JPEG_FMT_TYPE_CAPTURE);
+ q->w = MTK_JPEG_MIN_WIDTH;
+ q->h = MTK_JPEG_MIN_HEIGHT;
+
+ for (i = 0; i < q->fmt->colplanes; i++) {
+ u32 stride = q->w * q->fmt->h_sample[i] / 4;
+ u32 h = q->h * q->fmt->v_sample[i] / 4;
+
+ q->bytesperline[i] = stride;
+ q->sizeimage[i] = stride * h;
+ }
+}
+
+static int mtk_jpeg_open(struct file *file)
+{
+ struct mtk_jpeg_dev *jpeg = video_drvdata(file);
+ struct video_device *vfd = video_devdata(file);
+ struct mtk_jpeg_ctx *ctx;
+ int ret = 0;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ if (mutex_lock_interruptible(&jpeg->lock)) {
+ ret = -ERESTARTSYS;
+ goto free;
+ }
+
+ v4l2_fh_init(&ctx->fh, vfd);
+ file->private_data = &ctx->fh;
+ v4l2_fh_add(&ctx->fh);
+
+ ctx->jpeg = jpeg;
+ ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(jpeg->m2m_dev, ctx,
+ mtk_jpeg_queue_init);
+ if (IS_ERR(ctx->fh.m2m_ctx)) {
+ ret = PTR_ERR(ctx->fh.m2m_ctx);
+ goto error;
+ }
+
+ mtk_jpeg_set_default_params(ctx);
+ mutex_unlock(&jpeg->lock);
+ return 0;
+
+error:
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ mutex_unlock(&jpeg->lock);
+free:
+ kfree(ctx);
+ return ret;
+}
+
+static int mtk_jpeg_release(struct file *file)
+{
+ struct mtk_jpeg_dev *jpeg = video_drvdata(file);
+ struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(file->private_data);
+
+ mutex_lock(&jpeg->lock);
+ v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ kfree(ctx);
+ mutex_unlock(&jpeg->lock);
+ return 0;
+}
+
+static const struct v4l2_file_operations mtk_jpeg_fops = {
+ .owner = THIS_MODULE,
+ .open = mtk_jpeg_open,
+ .release = mtk_jpeg_release,
+ .poll = v4l2_m2m_fop_poll,
+ .unlocked_ioctl = video_ioctl2,
+ .mmap = v4l2_m2m_fop_mmap,
+};
+
+static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
+{
+ struct device_node *node;
+ struct platform_device *pdev;
+
+ node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
+ if (!node)
+ return -EINVAL;
+ pdev = of_find_device_by_node(node);
+ if (WARN_ON(!pdev)) {
+ of_node_put(node);
+ return -EINVAL;
+ }
+ of_node_put(node);
+
+ jpeg->larb = &pdev->dev;
+
+ jpeg->clk_jdec = devm_clk_get(jpeg->dev, "jpgdec");
+ if (IS_ERR(jpeg->clk_jdec))
+ return -EINVAL;
+
+ jpeg->clk_jdec_smi = devm_clk_get(jpeg->dev, "jpgdec-smi");
+ if (IS_ERR(jpeg->clk_jdec_smi))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int mtk_jpeg_probe(struct platform_device *pdev)
+{
+ struct mtk_jpeg_dev *jpeg;
+ struct resource *res;
+ int dec_irq;
+ int ret;
+
+ jpeg = devm_kzalloc(&pdev->dev, sizeof(*jpeg), GFP_KERNEL);
+ if (!jpeg)
+ return -ENOMEM;
+
+ mutex_init(&jpeg->lock);
+ spin_lock_init(&jpeg->hw_lock);
+ jpeg->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ jpeg->dec_reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(jpeg->dec_reg_base)) {
+ ret = PTR_ERR(jpeg->dec_reg_base);
+ return ret;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ dec_irq = platform_get_irq(pdev, 0);
+ if (!res || dec_irq < 0) {
+ dev_err(&pdev->dev, "Failed to get dec_irq %d.\n", dec_irq);
+ ret = -EINVAL;
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev, dec_irq, mtk_jpeg_dec_irq, 0,
+ pdev->name, jpeg);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request dec_irq %d (%d)\n",
+ dec_irq, ret);
+ ret = -EINVAL;
+ goto err_req_irq;
+ }
+
+ ret = mtk_jpeg_clk_init(jpeg);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
+ goto err_clk_init;
+ }
+
+ ret = v4l2_device_register(&pdev->dev, &jpeg->v4l2_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register v4l2 device\n");
+ ret = -EINVAL;
+ goto err_dev_register;
+ }
+
+ jpeg->m2m_dev = v4l2_m2m_init(&mtk_jpeg_m2m_ops);
+ if (IS_ERR(jpeg->m2m_dev)) {
+ v4l2_err(&jpeg->v4l2_dev, "Failed to init mem2mem device\n");
+ ret = PTR_ERR(jpeg->m2m_dev);
+ goto err_m2m_init;
+ }
+
+ jpeg->dec_vdev = video_device_alloc();
+ if (!jpeg->dec_vdev) {
+ ret = -ENOMEM;
+ goto err_dec_vdev_alloc;
+ }
+ snprintf(jpeg->dec_vdev->name, sizeof(jpeg->dec_vdev->name),
+ "%s-dec", MTK_JPEG_NAME);
+ jpeg->dec_vdev->fops = &mtk_jpeg_fops;
+ jpeg->dec_vdev->ioctl_ops = &mtk_jpeg_ioctl_ops;
+ jpeg->dec_vdev->minor = -1;
+ jpeg->dec_vdev->release = video_device_release;
+ jpeg->dec_vdev->lock = &jpeg->lock;
+ jpeg->dec_vdev->v4l2_dev = &jpeg->v4l2_dev;
+ jpeg->dec_vdev->vfl_dir = VFL_DIR_M2M;
+ jpeg->dec_vdev->device_caps = V4L2_CAP_STREAMING |
+ V4L2_CAP_VIDEO_M2M_MPLANE;
+
+ ret = video_register_device(jpeg->dec_vdev, VFL_TYPE_GRABBER, 3);
+ if (ret) {
+ v4l2_err(&jpeg->v4l2_dev, "Failed to register video device\n");
+ goto err_dec_vdev_register;
+ }
+
+ video_set_drvdata(jpeg->dec_vdev, jpeg);
+ v4l2_info(&jpeg->v4l2_dev,
+ "decoder device registered as /dev/video%d (%d,%d)\n",
+ jpeg->dec_vdev->num, VIDEO_MAJOR, jpeg->dec_vdev->minor);
+
+ platform_set_drvdata(pdev, jpeg);
+
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+err_dec_vdev_register:
+ video_device_release(jpeg->dec_vdev);
+
+err_dec_vdev_alloc:
+ v4l2_m2m_release(jpeg->m2m_dev);
+
+err_m2m_init:
+ v4l2_device_unregister(&jpeg->v4l2_dev);
+
+err_dev_register:
+
+err_clk_init:
+
+err_req_irq:
+
+ return ret;
+}
+
+static int mtk_jpeg_remove(struct platform_device *pdev)
+{
+ struct mtk_jpeg_dev *jpeg = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+ video_unregister_device(jpeg->dec_vdev);
+ video_device_release(jpeg->dec_vdev);
+ v4l2_m2m_release(jpeg->m2m_dev);
+ v4l2_device_unregister(&jpeg->v4l2_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mtk_jpeg_pm_suspend(struct device *dev)
+{
+ struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
+
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+ mtk_jpeg_clk_off(jpeg);
+
+ return 0;
+}
+
+static int mtk_jpeg_pm_resume(struct device *dev)
+{
+ struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
+
+ mtk_jpeg_clk_on(jpeg);
+ mtk_jpeg_dec_reset(jpeg->dec_reg_base);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_jpeg_suspend(struct device *dev)
+{
+ int ret;
+
+ if (pm_runtime_suspended(dev))
+ return 0;
+
+ ret = mtk_jpeg_pm_suspend(dev);
+ return ret;
+}
+
+static int mtk_jpeg_resume(struct device *dev)
+{
+ int ret;
+
+ if (pm_runtime_suspended(dev))
+ return 0;
+
+ ret = mtk_jpeg_pm_resume(dev);
+
+ return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops mtk_jpeg_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(mtk_jpeg_suspend, mtk_jpeg_resume)
+ SET_RUNTIME_PM_OPS(mtk_jpeg_pm_suspend, mtk_jpeg_pm_resume, NULL)
+};
+
+static const struct of_device_id mtk_jpeg_match[] = {
+ {
+ .compatible = "mediatek,mt8173-jpgdec",
+ .data = NULL,
+ },
+ {
+ .compatible = "mediatek,mt2701-jpgdec",
+ .data = NULL,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, mtk_jpeg_match);
+
+static struct platform_driver mtk_jpeg_driver = {
+ .probe = mtk_jpeg_probe,
+ .remove = mtk_jpeg_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = MTK_JPEG_NAME,
+ .of_match_table = mtk_jpeg_match,
+ .pm = &mtk_jpeg_pm_ops,
+ },
+};
+
+module_platform_driver(mtk_jpeg_driver);
+
+MODULE_DESCRIPTION("MediaTek JPEG codec driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
new file mode 100644
index 0000000..1a6cdfd
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_CORE_H
+#define _MTK_JPEG_CORE_H
+
+#include <linux/interrupt.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fh.h>
+
+#define MTK_JPEG_NAME "mtk-jpeg"
+
+#define MTK_JPEG_FMT_FLAG_DEC_OUTPUT BIT(0)
+#define MTK_JPEG_FMT_FLAG_DEC_CAPTURE BIT(1)
+
+#define MTK_JPEG_FMT_TYPE_OUTPUT 1
+#define MTK_JPEG_FMT_TYPE_CAPTURE 2
+
+#define MTK_JPEG_MIN_WIDTH 32
+#define MTK_JPEG_MIN_HEIGHT 32
+#define MTK_JPEG_MAX_WIDTH 8192
+#define MTK_JPEG_MAX_HEIGHT 8192
+
+#define MTK_JPEG_DEFAULT_SIZEIMAGE (1 * 1024 * 1024)
+
+enum mtk_jpeg_ctx_state {
+ MTK_JPEG_INIT = 0,
+ MTK_JPEG_RUNNING,
+ MTK_JPEG_SOURCE_CHANGE,
+};
+
+/**
+ * struct mt_jpeg - JPEG IP abstraction
+ * @lock: the mutex protecting this structure
+ * @hw_lock: spinlock protecting the hw device resource
+ * @workqueue: decode work queue
+ * @dev: JPEG device
+ * @v4l2_dev: v4l2 device for mem2mem mode
+ * @m2m_dev: v4l2 mem2mem device data
+ * @alloc_ctx: videobuf2 memory allocator's context
+ * @dec_vdev: video device node for decoder mem2mem mode
+ * @dec_reg_base: JPEG registers mapping
+ * @clk_jdec: JPEG hw working clock
+ * @clk_jdec_smi: JPEG SMI bus clock
+ * @larb: SMI device
+ */
+struct mtk_jpeg_dev {
+ struct mutex lock;
+ spinlock_t hw_lock;
+ struct workqueue_struct *workqueue;
+ struct device *dev;
+ struct v4l2_device v4l2_dev;
+ struct v4l2_m2m_dev *m2m_dev;
+ void *alloc_ctx;
+ struct video_device *dec_vdev;
+ void __iomem *dec_reg_base;
+ struct clk *clk_jdec;
+ struct clk *clk_jdec_smi;
+ struct device *larb;
+};
+
+/**
+ * struct jpeg_fmt - driver's internal color format data
+ * @fourcc: the fourcc code, 0 if not applicable
+ * @h_sample: horizontal sample count of plane in 4 * 4 pixel image
+ * @v_sample: vertical sample count of plane in 4 * 4 pixel image
+ * @colplanes: number of color planes (1 for packed formats)
+ * @h_align: horizontal alignment order (align to 2^h_align)
+ * @v_align: vertical alignment order (align to 2^v_align)
+ * @flags: flags describing format applicability
+ */
+struct mtk_jpeg_fmt {
+ u32 fourcc;
+ int h_sample[VIDEO_MAX_PLANES];
+ int v_sample[VIDEO_MAX_PLANES];
+ int colplanes;
+ int h_align;
+ int v_align;
+ u32 flags;
+};
+
+/**
+ * mtk_jpeg_q_data - parameters of one queue
+ * @fmt: driver-specific format of this queue
+ * @w: image width
+ * @h: image height
+ * @bytesperline: distance in bytes between the leftmost pixels in two adjacent
+ * lines
+ * @sizeimage: image buffer size in bytes
+ */
+struct mtk_jpeg_q_data {
+ struct mtk_jpeg_fmt *fmt;
+ u32 w;
+ u32 h;
+ u32 bytesperline[VIDEO_MAX_PLANES];
+ u32 sizeimage[VIDEO_MAX_PLANES];
+};
+
+/**
+ * mtk_jpeg_ctx - the device context data
+ * @jpeg: JPEG IP device for this context
+ * @out_q: source (output) queue information
+ * @cap_q: destination (capture) queue queue information
+ * @fh: V4L2 file handle
+ * @dec_param parameters for HW decoding
+ * @state: state of the context
+ * @header_valid: set if header has been parsed and valid
+ * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
+ * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
+ * @quantization: enum v4l2_quantization, colorspace quantization
+ * @xfer_func: enum v4l2_xfer_func, colorspace transfer function
+ */
+struct mtk_jpeg_ctx {
+ struct mtk_jpeg_dev *jpeg;
+ struct mtk_jpeg_q_data out_q;
+ struct mtk_jpeg_q_data cap_q;
+ struct v4l2_fh fh;
+ enum mtk_jpeg_ctx_state state;
+
+ enum v4l2_colorspace colorspace;
+ enum v4l2_ycbcr_encoding ycbcr_enc;
+ enum v4l2_quantization quantization;
+ enum v4l2_xfer_func xfer_func;
+};
+
+#endif /* _MTK_JPEG_CORE_H */
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
new file mode 100644
index 0000000..77b4cc6
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c
@@ -0,0 +1,417 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <media/videobuf2-core.h>
+
+#include "mtk_jpeg_hw.h"
+
+#define MTK_JPEG_DUNUM_MASK(val) (((val) - 1) & 0x3)
+
+enum mtk_jpeg_color {
+ MTK_JPEG_COLOR_420 = 0x00221111,
+ MTK_JPEG_COLOR_422 = 0x00211111,
+ MTK_JPEG_COLOR_444 = 0x00111111,
+ MTK_JPEG_COLOR_422V = 0x00121111,
+ MTK_JPEG_COLOR_422X2 = 0x00412121,
+ MTK_JPEG_COLOR_422VX2 = 0x00222121,
+ MTK_JPEG_COLOR_400 = 0x00110000
+};
+
+static inline int mtk_jpeg_verify_align(u32 val, int align, u32 reg)
+{
+ if (val & (align - 1)) {
+ pr_err("mtk-jpeg: write reg %x without %d align\n", reg, align);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mtk_jpeg_decide_format(struct mtk_jpeg_dec_param *param)
+{
+ param->src_color = (param->sampling_w[0] << 20) |
+ (param->sampling_h[0] << 16) |
+ (param->sampling_w[1] << 12) |
+ (param->sampling_h[1] << 8) |
+ (param->sampling_w[2] << 4) |
+ (param->sampling_h[2]);
+
+ param->uv_brz_w = 0;
+ switch (param->src_color) {
+ case MTK_JPEG_COLOR_444:
+ param->uv_brz_w = 1;
+ param->dst_fourcc = V4L2_PIX_FMT_YUV422M;
+ break;
+ case MTK_JPEG_COLOR_422X2:
+ case MTK_JPEG_COLOR_422:
+ param->dst_fourcc = V4L2_PIX_FMT_YUV422M;
+ break;
+ case MTK_JPEG_COLOR_422V:
+ case MTK_JPEG_COLOR_422VX2:
+ param->uv_brz_w = 1;
+ param->dst_fourcc = V4L2_PIX_FMT_YUV420M;
+ break;
+ case MTK_JPEG_COLOR_420:
+ param->dst_fourcc = V4L2_PIX_FMT_YUV420M;
+ break;
+ case MTK_JPEG_COLOR_400:
+ param->dst_fourcc = V4L2_PIX_FMT_GREY;
+ break;
+ default:
+ param->dst_fourcc = 0;
+ return -1;
+ }
+
+ return 0;
+}
+
+static void mtk_jpeg_calc_mcu(struct mtk_jpeg_dec_param *param)
+{
+ u32 factor_w, factor_h;
+ u32 i, comp, blk;
+
+ factor_w = 2 + param->sampling_w[0];
+ factor_h = 2 + param->sampling_h[0];
+ param->mcu_w = (param->pic_w + (1 << factor_w) - 1) >> factor_w;
+ param->mcu_h = (param->pic_h + (1 << factor_h) - 1) >> factor_h;
+ param->total_mcu = param->mcu_w * param->mcu_h;
+ param->unit_num = ((param->pic_w + 7) >> 3) * ((param->pic_h + 7) >> 3);
+ param->blk_num = 0;
+ for (i = 0; i < MTK_JPEG_COMP_MAX; i++) {
+ param->blk_comp[i] = 0;
+ if (i >= param->comp_num)
+ continue;
+ param->blk_comp[i] = param->sampling_w[i] *
+ param->sampling_h[i];
+ param->blk_num += param->blk_comp[i];
+ }
+
+ param->membership = 0;
+ for (i = 0, blk = 0, comp = 0; i < MTK_JPEG_BLOCK_MAX; i++) {
+ if (i < param->blk_num && comp < param->comp_num) {
+ u32 tmp;
+
+ tmp = (0x04 + (comp & 0x3));
+ param->membership |= tmp << (i * 3);
+ if (++blk == param->blk_comp[comp]) {
+ comp++;
+ blk = 0;
+ }
+ } else {
+ param->membership |= 7 << (i * 3);
+ }
+ }
+}
+
+static void mtk_jpeg_calc_dma_group(struct mtk_jpeg_dec_param *param)
+{
+ u32 factor_mcu = 3;
+
+ if (param->src_color == MTK_JPEG_COLOR_444 &&
+ param->dst_fourcc == V4L2_PIX_FMT_YUV422M)
+ factor_mcu = 4;
+ else if (param->src_color == MTK_JPEG_COLOR_422V &&
+ param->dst_fourcc == V4L2_PIX_FMT_YUV420M)
+ factor_mcu = 4;
+ else if (param->src_color == MTK_JPEG_COLOR_422X2 &&
+ param->dst_fourcc == V4L2_PIX_FMT_YUV422M)
+ factor_mcu = 2;
+ else if (param->src_color == MTK_JPEG_COLOR_400 ||
+ (param->src_color & 0x0FFFF) == 0)
+ factor_mcu = 4;
+
+ param->dma_mcu = 1 << factor_mcu;
+ param->dma_group = param->mcu_w / param->dma_mcu;
+ param->dma_last_mcu = param->mcu_w % param->dma_mcu;
+ if (param->dma_last_mcu)
+ param->dma_group++;
+ else
+ param->dma_last_mcu = param->dma_mcu;
+}
+
+static int mtk_jpeg_calc_dst_size(struct mtk_jpeg_dec_param *param)
+{
+ u32 i, padding_w;
+ u32 ds_row_h[3];
+ u32 brz_w[3];
+
+ brz_w[0] = 0;
+ brz_w[1] = param->uv_brz_w;
+ brz_w[2] = brz_w[1];
+
+ for (i = 0; i < param->comp_num; i++) {
+ if (brz_w[i] > 3)
+ return -1;
+
+ padding_w = param->mcu_w * MTK_JPEG_DCTSIZE *
+ param->sampling_w[i];
+ /* output format is 420/422 */
+ param->comp_w[i] = padding_w >> brz_w[i];
+ param->comp_w[i] = mtk_jpeg_align(param->comp_w[i],
+ MTK_JPEG_DCTSIZE);
+ param->img_stride[i] = i ? mtk_jpeg_align(param->comp_w[i], 16)
+ : mtk_jpeg_align(param->comp_w[i], 32);
+ ds_row_h[i] = (MTK_JPEG_DCTSIZE * param->sampling_h[i]);
+ }
+ param->dec_w = param->img_stride[0];
+ param->dec_h = ds_row_h[0] * param->mcu_h;
+
+ for (i = 0; i < MTK_JPEG_COMP_MAX; i++) {
+ /* They must be equal in frame mode. */
+ param->mem_stride[i] = param->img_stride[i];
+ param->comp_size[i] = param->mem_stride[i] * ds_row_h[i] *
+ param->mcu_h;
+ }
+
+ param->y_size = param->comp_size[0];
+ param->uv_size = param->comp_size[1];
+ param->dec_size = param->y_size + (param->uv_size << 1);
+
+ return 0;
+}
+
+int mtk_jpeg_dec_fill_param(struct mtk_jpeg_dec_param *param)
+{
+ if (mtk_jpeg_decide_format(param))
+ return -1;
+
+ mtk_jpeg_calc_mcu(param);
+ mtk_jpeg_calc_dma_group(param);
+ if (mtk_jpeg_calc_dst_size(param))
+ return -2;
+
+ return 0;
+}
+
+u32 mtk_jpeg_dec_get_int_status(void __iomem *base)
+{
+ u32 ret;
+
+ ret = readl(base + JPGDEC_REG_INTERRUPT_STATUS) & BIT_INQST_MASK_ALLIRQ;
+ if (ret)
+ writel(ret, base + JPGDEC_REG_INTERRUPT_STATUS);
+
+ return ret;
+}
+
+u32 mtk_jpeg_dec_enum_result(u32 irq_result)
+{
+ if (irq_result & BIT_INQST_MASK_EOF)
+ return MTK_JPEG_DEC_RESULT_EOF_DONE;
+ if (irq_result & BIT_INQST_MASK_PAUSE)
+ return MTK_JPEG_DEC_RESULT_PAUSE;
+ if (irq_result & BIT_INQST_MASK_UNDERFLOW)
+ return MTK_JPEG_DEC_RESULT_UNDERFLOW;
+ if (irq_result & BIT_INQST_MASK_OVERFLOW)
+ return MTK_JPEG_DEC_RESULT_OVERFLOW;
+ if (irq_result & BIT_INQST_MASK_ERROR_BS)
+ return MTK_JPEG_DEC_RESULT_ERROR_BS;
+
+ return MTK_JPEG_DEC_RESULT_ERROR_UNKNOWN;
+}
+
+void mtk_jpeg_dec_start(void __iomem *base)
+{
+ writel(0, base + JPGDEC_REG_TRIG);
+}
+
+static void mtk_jpeg_dec_soft_reset(void __iomem *base)
+{
+ writel(0x0000FFFF, base + JPGDEC_REG_INTERRUPT_STATUS);
+ writel(0x00, base + JPGDEC_REG_RESET);
+ writel(0x01, base + JPGDEC_REG_RESET);
+}
+
+static void mtk_jpeg_dec_hard_reset(void __iomem *base)
+{
+ writel(0x00, base + JPGDEC_REG_RESET);
+ writel(0x10, base + JPGDEC_REG_RESET);
+}
+
+void mtk_jpeg_dec_reset(void __iomem *base)
+{
+ mtk_jpeg_dec_soft_reset(base);
+ mtk_jpeg_dec_hard_reset(base);
+}
+
+static void mtk_jpeg_dec_set_brz_factor(void __iomem *base, u8 yscale_w,
+ u8 yscale_h, u8 uvscale_w, u8 uvscale_h)
+{
+ u32 val;
+
+ val = (uvscale_h << 12) | (uvscale_w << 8) |
+ (yscale_h << 4) | yscale_w;
+ writel(val, base + JPGDEC_REG_BRZ_FACTOR);
+}
+
+static void mtk_jpeg_dec_set_dst_bank0(void __iomem *base, u32 addr_y,
+ u32 addr_u, u32 addr_v)
+{
+ mtk_jpeg_verify_align(addr_y, 16, JPGDEC_REG_DEST_ADDR0_Y);
+ writel(addr_y, base + JPGDEC_REG_DEST_ADDR0_Y);
+ mtk_jpeg_verify_align(addr_u, 16, JPGDEC_REG_DEST_ADDR0_U);
+ writel(addr_u, base + JPGDEC_REG_DEST_ADDR0_U);
+ mtk_jpeg_verify_align(addr_v, 16, JPGDEC_REG_DEST_ADDR0_V);
+ writel(addr_v, base + JPGDEC_REG_DEST_ADDR0_V);
+}
+
+static void mtk_jpeg_dec_set_dst_bank1(void __iomem *base, u32 addr_y,
+ u32 addr_u, u32 addr_v)
+{
+ writel(addr_y, base + JPGDEC_REG_DEST_ADDR1_Y);
+ writel(addr_u, base + JPGDEC_REG_DEST_ADDR1_U);
+ writel(addr_v, base + JPGDEC_REG_DEST_ADDR1_V);
+}
+
+static void mtk_jpeg_dec_set_mem_stride(void __iomem *base, u32 stride_y,
+ u32 stride_uv)
+{
+ writel((stride_y & 0xFFFF), base + JPGDEC_REG_STRIDE_Y);
+ writel((stride_uv & 0xFFFF), base + JPGDEC_REG_STRIDE_UV);
+}
+
+static void mtk_jpeg_dec_set_img_stride(void __iomem *base, u32 stride_y,
+ u32 stride_uv)
+{
+ writel((stride_y & 0xFFFF), base + JPGDEC_REG_IMG_STRIDE_Y);
+ writel((stride_uv & 0xFFFF), base + JPGDEC_REG_IMG_STRIDE_UV);
+}
+
+static void mtk_jpeg_dec_set_pause_mcu_idx(void __iomem *base, u32 idx)
+{
+ writel(idx & 0x0003FFFFFF, base + JPGDEC_REG_PAUSE_MCU_NUM);
+}
+
+static void mtk_jpeg_dec_set_dec_mode(void __iomem *base, u32 mode)
+{
+ writel(mode & 0x03, base + JPGDEC_REG_OPERATION_MODE);
+}
+
+static void mtk_jpeg_dec_set_bs_write_ptr(void __iomem *base, u32 ptr)
+{
+ mtk_jpeg_verify_align(ptr, 16, JPGDEC_REG_FILE_BRP);
+ writel(ptr, base + JPGDEC_REG_FILE_BRP);
+}
+
+static void mtk_jpeg_dec_set_bs_info(void __iomem *base, u32 addr, u32 size)
+{
+ mtk_jpeg_verify_align(addr, 16, JPGDEC_REG_FILE_ADDR);
+ mtk_jpeg_verify_align(size, 128, JPGDEC_REG_FILE_TOTAL_SIZE);
+ writel(addr, base + JPGDEC_REG_FILE_ADDR);
+ writel(size, base + JPGDEC_REG_FILE_TOTAL_SIZE);
+}
+
+static void mtk_jpeg_dec_set_comp_id(void __iomem *base, u32 id_y, u32 id_u,
+ u32 id_v)
+{
+ u32 val;
+
+ val = ((id_y & 0x00FF) << 24) | ((id_u & 0x00FF) << 16) |
+ ((id_v & 0x00FF) << 8);
+ writel(val, base + JPGDEC_REG_COMP_ID);
+}
+
+static void mtk_jpeg_dec_set_total_mcu(void __iomem *base, u32 num)
+{
+ writel(num - 1, base + JPGDEC_REG_TOTAL_MCU_NUM);
+}
+
+static void mtk_jpeg_dec_set_comp0_du(void __iomem *base, u32 num)
+{
+ writel(num - 1, base + JPGDEC_REG_COMP0_DATA_UNIT_NUM);
+}
+
+static void mtk_jpeg_dec_set_du_membership(void __iomem *base, u32 member,
+ u32 gmc, u32 isgray)
+{
+ if (isgray)
+ member = 0x3FFFFFFC;
+ member |= (isgray << 31) | (gmc << 30);
+ writel(member, base + JPGDEC_REG_DU_CTRL);
+}
+
+static void mtk_jpeg_dec_set_q_table(void __iomem *base, u32 id0, u32 id1,
+ u32 id2)
+{
+ u32 val;
+
+ val = ((id0 & 0x0f) << 8) | ((id1 & 0x0f) << 4) | ((id2 & 0x0f) << 0);
+ writel(val, base + JPGDEC_REG_QT_ID);
+}
+
+static void mtk_jpeg_dec_set_dma_group(void __iomem *base, u32 mcu_group,
+ u32 group_num, u32 last_mcu)
+{
+ u32 val;
+
+ val = (((mcu_group - 1) & 0x00FF) << 16) |
+ (((group_num - 1) & 0x007F) << 8) |
+ ((last_mcu - 1) & 0x00FF);
+ writel(val, base + JPGDEC_REG_WDMA_CTRL);
+}
+
+static void mtk_jpeg_dec_set_sampling_factor(void __iomem *base, u32 comp_num,
+ u32 y_w, u32 y_h, u32 u_w,
+ u32 u_h, u32 v_w, u32 v_h)
+{
+ u32 val;
+ u32 y_wh = (MTK_JPEG_DUNUM_MASK(y_w) << 2) | MTK_JPEG_DUNUM_MASK(y_h);
+ u32 u_wh = (MTK_JPEG_DUNUM_MASK(u_w) << 2) | MTK_JPEG_DUNUM_MASK(u_h);
+ u32 v_wh = (MTK_JPEG_DUNUM_MASK(v_w) << 2) | MTK_JPEG_DUNUM_MASK(v_h);
+
+ if (comp_num == 1)
+ val = 0;
+ else
+ val = (y_wh << 8) | (u_wh << 4) | v_wh;
+ writel(val, base + JPGDEC_REG_DU_NUM);
+}
+
+void mtk_jpeg_dec_set_config(void __iomem *base,
+ struct mtk_jpeg_dec_param *config,
+ struct mtk_jpeg_bs *bs,
+ struct mtk_jpeg_fb *fb)
+{
+ mtk_jpeg_dec_set_brz_factor(base, 0, 0, config->uv_brz_w, 0);
+ mtk_jpeg_dec_set_dec_mode(base, 0);
+ mtk_jpeg_dec_set_comp0_du(base, config->unit_num);
+ mtk_jpeg_dec_set_total_mcu(base, config->total_mcu);
+ mtk_jpeg_dec_set_bs_info(base, bs->str_addr, bs->size);
+ mtk_jpeg_dec_set_bs_write_ptr(base, bs->end_addr);
+ mtk_jpeg_dec_set_du_membership(base, config->membership, 1,
+ (config->comp_num == 1) ? 1 : 0);
+ mtk_jpeg_dec_set_comp_id(base, config->comp_id[0], config->comp_id[1],
+ config->comp_id[2]);
+ mtk_jpeg_dec_set_q_table(base, config->qtbl_num[0],
+ config->qtbl_num[1], config->qtbl_num[2]);
+ mtk_jpeg_dec_set_sampling_factor(base, config->comp_num,
+ config->sampling_w[0],
+ config->sampling_h[0],
+ config->sampling_w[1],
+ config->sampling_h[1],
+ config->sampling_w[2],
+ config->sampling_h[2]);
+ mtk_jpeg_dec_set_mem_stride(base, config->mem_stride[0],
+ config->mem_stride[1]);
+ mtk_jpeg_dec_set_img_stride(base, config->img_stride[0],
+ config->img_stride[1]);
+ mtk_jpeg_dec_set_dst_bank0(base, fb->plane_addr[0],
+ fb->plane_addr[1], fb->plane_addr[2]);
+ mtk_jpeg_dec_set_dst_bank1(base, 0, 0, 0);
+ mtk_jpeg_dec_set_dma_group(base, config->dma_mcu, config->dma_group,
+ config->dma_last_mcu);
+ mtk_jpeg_dec_set_pause_mcu_idx(base, config->total_mcu);
+}
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
new file mode 100644
index 0000000..37152a6
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_HW_H
+#define _MTK_JPEG_HW_H
+
+#include <media/videobuf2-core.h>
+
+#include "mtk_jpeg_core.h"
+#include "mtk_jpeg_reg.h"
+
+enum {
+ MTK_JPEG_DEC_RESULT_EOF_DONE = 0,
+ MTK_JPEG_DEC_RESULT_PAUSE = 1,
+ MTK_JPEG_DEC_RESULT_UNDERFLOW = 2,
+ MTK_JPEG_DEC_RESULT_OVERFLOW = 3,
+ MTK_JPEG_DEC_RESULT_ERROR_BS = 4,
+ MTK_JPEG_DEC_RESULT_ERROR_UNKNOWN = 6
+};
+
+struct mtk_jpeg_dec_param {
+ u32 pic_w;
+ u32 pic_h;
+ u32 dec_w;
+ u32 dec_h;
+ u32 src_color;
+ u32 dst_fourcc;
+ u32 mcu_w;
+ u32 mcu_h;
+ u32 total_mcu;
+ u32 unit_num;
+ u32 comp_num;
+ u32 comp_id[MTK_JPEG_COMP_MAX];
+ u32 sampling_w[MTK_JPEG_COMP_MAX];
+ u32 sampling_h[MTK_JPEG_COMP_MAX];
+ u32 qtbl_num[MTK_JPEG_COMP_MAX];
+ u32 blk_num;
+ u32 blk_comp[MTK_JPEG_COMP_MAX];
+ u32 membership;
+ u32 dma_mcu;
+ u32 dma_group;
+ u32 dma_last_mcu;
+ u32 img_stride[MTK_JPEG_COMP_MAX];
+ u32 mem_stride[MTK_JPEG_COMP_MAX];
+ u32 comp_w[MTK_JPEG_COMP_MAX];
+ u32 comp_size[MTK_JPEG_COMP_MAX];
+ u32 y_size;
+ u32 uv_size;
+ u32 dec_size;
+ u8 uv_brz_w;
+};
+
+static inline u32 mtk_jpeg_align(u32 val, u32 align)
+{
+ return (val + align - 1) & ~(align - 1);
+}
+
+struct mtk_jpeg_bs {
+ dma_addr_t str_addr;
+ dma_addr_t end_addr;
+ size_t size;
+};
+
+struct mtk_jpeg_fb {
+ dma_addr_t plane_addr[MTK_JPEG_COMP_MAX];
+ size_t size;
+};
+
+int mtk_jpeg_dec_fill_param(struct mtk_jpeg_dec_param *param);
+u32 mtk_jpeg_dec_get_int_status(void __iomem *dec_reg_base);
+u32 mtk_jpeg_dec_enum_result(u32 irq_result);
+void mtk_jpeg_dec_set_config(void __iomem *base,
+ struct mtk_jpeg_dec_param *config,
+ struct mtk_jpeg_bs *bs,
+ struct mtk_jpeg_fb *fb);
+void mtk_jpeg_dec_reset(void __iomem *dec_reg_base);
+void mtk_jpeg_dec_start(void __iomem *dec_reg_base);
+
+#endif /* _MTK_JPEG_HW_H */
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
new file mode 100644
index 0000000..3886854
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/videodev2.h>
+
+#include "mtk_jpeg_parse.h"
+
+#define TEM 0x01
+#define SOF0 0xc0
+#define RST 0xd0
+#define SOI 0xd8
+#define EOI 0xd9
+
+struct mtk_jpeg_stream {
+ u8 *addr;
+ u32 size;
+ u32 curr;
+};
+
+static int read_byte(struct mtk_jpeg_stream *stream)
+{
+ if (stream->curr >= stream->size)
+ return -1;
+ return stream->addr[stream->curr++];
+}
+
+static int read_word_be(struct mtk_jpeg_stream *stream, u32 *word)
+{
+ u32 temp;
+ int byte;
+
+ byte = read_byte(stream);
+ if (byte == -1)
+ return -1;
+ temp = byte << 8;
+ byte = read_byte(stream);
+ if (byte == -1)
+ return -1;
+ *word = (u32)byte | temp;
+
+ return 0;
+}
+
+static void read_skip(struct mtk_jpeg_stream *stream, long len)
+{
+ if (len <= 0)
+ return;
+ while (len--)
+ read_byte(stream);
+}
+
+static bool mtk_jpeg_do_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va,
+ u32 src_size)
+{
+ bool notfound = true;
+ struct mtk_jpeg_stream stream;
+
+ stream.addr = src_addr_va;
+ stream.size = src_size;
+ stream.curr = 0;
+
+ while (notfound) {
+ int i, length, byte;
+ u32 word;
+
+ byte = read_byte(&stream);
+ if (byte == -1)
+ return false;
+ if (byte != 0xff)
+ continue;
+ do
+ byte = read_byte(&stream);
+ while (byte == 0xff);
+ if (byte == -1)
+ return false;
+ if (byte == 0)
+ continue;
+
+ length = 0;
+ switch (byte) {
+ case SOF0:
+ /* length */
+ if (read_word_be(&stream, &word))
+ break;
+
+ /* precision */
+ if (read_byte(&stream) == -1)
+ break;
+
+ if (read_word_be(&stream, &word))
+ break;
+ param->pic_h = word;
+
+ if (read_word_be(&stream, &word))
+ break;
+ param->pic_w = word;
+
+ param->comp_num = read_byte(&stream);
+ if (param->comp_num != 1 && param->comp_num != 3)
+ break;
+
+ for (i = 0; i < param->comp_num; i++) {
+ param->comp_id[i] = read_byte(&stream);
+ if (param->comp_id[i] == -1)
+ break;
+
+ /* sampling */
+ byte = read_byte(&stream);
+ if (byte == -1)
+ break;
+ param->sampling_w[i] = (byte >> 4) & 0x0F;
+ param->sampling_h[i] = byte & 0x0F;
+
+ param->qtbl_num[i] = read_byte(&stream);
+ if (param->qtbl_num[i] == -1)
+ break;
+ }
+
+ notfound = !(i == param->comp_num);
+ break;
+ case RST ... RST + 7:
+ case SOI:
+ case EOI:
+ case TEM:
+ break;
+ default:
+ if (read_word_be(&stream, &word))
+ break;
+ length = (long)word - 2;
+ read_skip(&stream, length);
+ break;
+ }
+ }
+
+ return !notfound;
+}
+
+bool mtk_jpeg_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va,
+ u32 src_size)
+{
+ if (!mtk_jpeg_do_parse(param, src_addr_va, src_size))
+ return false;
+ if (mtk_jpeg_dec_fill_param(param))
+ return false;
+
+ return true;
+}
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
new file mode 100644
index 0000000..5d92340
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_PARSE_H
+#define _MTK_JPEG_PARSE_H
+
+#include "mtk_jpeg_hw.h"
+
+bool mtk_jpeg_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va,
+ u32 src_size);
+
+#endif /* _MTK_JPEG_PARSE_H */
+
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
new file mode 100644
index 0000000..fc490d6
--- /dev/null
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
+ * Rick Chang <rick.chang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MTK_JPEG_REG_H
+#define _MTK_JPEG_REG_H
+
+#define MTK_JPEG_COMP_MAX 3
+#define MTK_JPEG_BLOCK_MAX 10
+#define MTK_JPEG_DCTSIZE 8
+
+#define BIT_INQST_MASK_ERROR_BS 0x20
+#define BIT_INQST_MASK_PAUSE 0x10
+#define BIT_INQST_MASK_OVERFLOW 0x04
+#define BIT_INQST_MASK_UNDERFLOW 0x02
+#define BIT_INQST_MASK_EOF 0x01
+#define BIT_INQST_MASK_ALLIRQ 0x37
+
+#define JPGDEC_REG_RESET 0x0090
+#define JPGDEC_REG_BRZ_FACTOR 0x00F8
+#define JPGDEC_REG_DU_NUM 0x00FC
+#define JPGDEC_REG_DEST_ADDR0_Y 0x0140
+#define JPGDEC_REG_DEST_ADDR0_U 0x0144
+#define JPGDEC_REG_DEST_ADDR0_V 0x0148
+#define JPGDEC_REG_DEST_ADDR1_Y 0x014C
+#define JPGDEC_REG_DEST_ADDR1_U 0x0150
+#define JPGDEC_REG_DEST_ADDR1_V 0x0154
+#define JPGDEC_REG_STRIDE_Y 0x0158
+#define JPGDEC_REG_STRIDE_UV 0x015C
+#define JPGDEC_REG_IMG_STRIDE_Y 0x0160
+#define JPGDEC_REG_IMG_STRIDE_UV 0x0164
+#define JPGDEC_REG_WDMA_CTRL 0x016C
+#define JPGDEC_REG_PAUSE_MCU_NUM 0x0170
+#define JPGDEC_REG_OPERATION_MODE 0x017C
+#define JPGDEC_REG_FILE_ADDR 0x0200
+#define JPGDEC_REG_COMP_ID 0x020C
+#define JPGDEC_REG_TOTAL_MCU_NUM 0x0210
+#define JPGDEC_REG_COMP0_DATA_UNIT_NUM 0x0224
+#define JPGDEC_REG_DU_CTRL 0x023C
+#define JPGDEC_REG_TRIG 0x0240
+#define JPGDEC_REG_FILE_BRP 0x0248
+#define JPGDEC_REG_FILE_TOTAL_SIZE 0x024C
+#define JPGDEC_REG_QT_ID 0x0270
+#define JPGDEC_REG_INTERRUPT_STATUS 0x0274
+#define JPGDEC_REG_STATUS 0x0278
+
+#endif /* _MTK_JPEG_REG_H */
--
1.9.1
^ permalink raw reply related
* [PATCH v6 1/3] dt-bindings: mediatek: Add a binding for Mediatek JPEG Decoder
From: Rick Chang @ 2016-11-17 3:38 UTC (permalink / raw)
To: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring
Cc: linux-kernel, linux-media, srv_heupstream, linux-mediatek,
linux-arm-kernel, devicetree, Minghsiu Tsai, Rick Chang
In-Reply-To: <1479353915-5043-1-git-send-email-rick.chang@mediatek.com>
Add a DT binding documentation for Mediatek JPEG Decoder of
MT2701 SoC.
Signed-off-by: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/media/mediatek-jpeg-decoder.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
new file mode 100644
index 0000000..3813947
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
@@ -0,0 +1,37 @@
+* Mediatek JPEG Decoder
+
+Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+Required properties:
+- compatible : must be one of the following string:
+ "mediatek,mt8173-jpgdec"
+ "mediatek,mt2701-jpgdec"
+- reg : physical base address of the jpeg decoder registers and length of
+ memory mapped region.
+- interrupts : interrupt number to the interrupt controller.
+- clocks: device clocks, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "jpgdec-smi" and "jpgdec".
+- power-domains: a phandle to the power domain, see
+ Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,larb: must contain the local arbiters in the current Socs, see
+ Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+ for details.
+- iommus: should point to the respective IOMMU block with master port as
+ argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+ for details.
+
+Example:
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
--
1.9.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox