* [PATCH v4 3/6] arm: dts: aspeed-g5: Add SoC Display Controller node
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161206035348.29948-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index dd94d9361fda..c7ff3ea4bf37 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -71,6 +71,12 @@
reg = <0x1e6e202c 0x4>;
};
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ };
+
sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x9000>; // 36K
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v4 2/6] arm: dts: aspeed-g4: Add gpio controller to devicetree
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206035348.29948-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b00dfc7a3bf7..20b75667286f 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -822,6 +822,16 @@
reg = <0x1e720000 0x8000>; // 32K
};
+ gpio: gpio@1e780000 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2400-gpio";
+ reg = <0x1e780000 0x1000>;
+ interrupts = <20>;
+ gpio-ranges = <&pinctrl 0 0 220>;
+ interrupt-controller;
+ };
+
timer: timer@1e782000 {
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
--
2.9.3
^ permalink raw reply related
* [PATCH v4 1/6] arm: dts: aspeed-g4: Add syscon and pin controller nodes
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206035348.29948-1-andrew@aj.id.au>
The pin controller's child nodes expose the functions currently
implemented in the the g4 pin controller driver.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 750 +++++++++++++++++++++++++++++++++++++++
1 file changed, 750 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 22dee5937d5c..b00dfc7a3bf7 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -54,6 +54,756 @@
clocks = <&clk_clkin>;
};
+ syscon: syscon@1e6e2000 {
+ compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g4-pinctrl";
+
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
+
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
+
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
+
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
+
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
+
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
+
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
+
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
+
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
+
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
+
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
+
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
+
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
+
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
+
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
+
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
+
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
+
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
+
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
+
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
+
+ pinctrl_extrst_default: extrst_default {
+ function = "EXTRST";
+ groups = "EXTRST";
+ };
+
+ pinctrl_flack_default: flack_default {
+ function = "FLACK";
+ groups = "FLACK";
+ };
+
+ pinctrl_flbusy_default: flbusy_default {
+ function = "FLBUSY";
+ groups = "FLBUSY";
+ };
+
+ pinctrl_flwp_default: flwp_default {
+ function = "FLWP";
+ groups = "FLWP";
+ };
+
+ pinctrl_gpid_default: gpid_default {
+ function = "GPID";
+ groups = "GPID";
+ };
+
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
+
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
+
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
+
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
+
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
+
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
+
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
+
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
+
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
+
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
+
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
+
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
+
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
+
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
+
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
+
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
+
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
+
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
+
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
+
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
+
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
+
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
+
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
+
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
+
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
+
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
+
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
+
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
+
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
+
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
+
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
+
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
+
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
+
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
+
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
+
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
+
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
+
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
+
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
+
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
+
+ pinctrl_ndts4_default: ndts4_default {
+ function = "NDTS4";
+ groups = "NDTS4";
+ };
+
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
+
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
+
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
+
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
+
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
+
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
+
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
+
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
+
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
+
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
+
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
+
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
+
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
+
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
+
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
+
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
+
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
+
+ pinctrl_rom16_default: rom16_default {
+ function = "ROM16";
+ groups = "ROM16";
+ };
+
+ pinctrl_rom8_default: rom8_default {
+ function = "ROM8";
+ groups = "ROM8";
+ };
+
+ pinctrl_romcs1_default: romcs1_default {
+ function = "ROMCS1";
+ groups = "ROMCS1";
+ };
+
+ pinctrl_romcs2_default: romcs2_default {
+ function = "ROMCS2";
+ groups = "ROMCS2";
+ };
+
+ pinctrl_romcs3_default: romcs3_default {
+ function = "ROMCS3";
+ groups = "ROMCS3";
+ };
+
+ pinctrl_romcs4_default: romcs4_default {
+ function = "ROMCS4";
+ groups = "ROMCS4";
+ };
+
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
+
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
+
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
+
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
+
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
+
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
+
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
+
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
+
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
+
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
+
+ pinctrl_sgpmck_default: sgpmck_default {
+ function = "SGPMCK";
+ groups = "SGPMCK";
+ };
+
+ pinctrl_sgpmi_default: sgpmi_default {
+ function = "SGPMI";
+ groups = "SGPMI";
+ };
+
+ pinctrl_sgpmld_default: sgpmld_default {
+ function = "SGPMLD";
+ groups = "SGPMLD";
+ };
+
+ pinctrl_sgpmo_default: sgpmo_default {
+ function = "SGPMO";
+ groups = "SGPMO";
+ };
+
+ pinctrl_sgpsck_default: sgpsck_default {
+ function = "SGPSCK";
+ groups = "SGPSCK";
+ };
+
+ pinctrl_sgpsi0_default: sgpsi0_default {
+ function = "SGPSI0";
+ groups = "SGPSI0";
+ };
+
+ pinctrl_sgpsi1_default: sgpsi1_default {
+ function = "SGPSI1";
+ groups = "SGPSI1";
+ };
+
+ pinctrl_sgpsld_default: sgpsld_default {
+ function = "SGPSLD";
+ groups = "SGPSLD";
+ };
+
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
+
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
+
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
+
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
+
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
+
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
+
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
+
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
+
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
+
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
+
+ pinctrl_spics1_default: spics1_default {
+ function = "SPICS1";
+ groups = "SPICS1";
+ };
+
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
+
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
+
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_vgabios_rom_default: vgabios_rom_default {
+ function = "VGABIOS_ROM";
+ groups = "VGABIOS_ROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi18_default: vpi18_default {
+ function = "VPI18";
+ groups = "VPI18";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpi30_default: vpi30_default {
+ function = "VPI30";
+ groups = "VPI30";
+ };
+
+ pinctrl_vpo12_default: vpo12_default {
+ function = "VPO12";
+ groups = "VPO12";
+ };
+
+ pinctrl_vpo24_default: vpo24_default {
+ function = "VPO24";
+ groups = "VPO24";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
+ };
+
+ };
+ };
+
clk_apb: clk_apb@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,g4-apb-clock";
--
2.9.3
^ permalink raw reply related
* [PATCH v4 0/6] aspeed: Integrate pinctrl and gpio drivers
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Hello,
This picks up some work from a while back that adds pinctrl and GPIO support to
the Aspeed devicetrees. See the previous series:
https://lkml.org/lkml/2016/8/30/74
Since v3 two new patches have been added, describing the Low Pin Count bus and
SoC Display Controller nodes. These are essential for the aspeed-g5 pinctrl.
Cheers,
Andrew
Andrew Jeffery (6):
arm: dts: aspeed-g4: Add syscon and pin controller nodes
arm: dts: aspeed-g4: Add gpio controller to devicetree
arm: dts: aspeed-g5: Add SoC Display Controller node
arm: dts: aspeed-g5: Add LPC Controller node
arm: dts: aspeed-g5: Add syscon and pin controller nodes
arm: dts: aspeed-g5: Add gpio controller to devicetree
arch/arm/boot/dts/aspeed-g4.dtsi | 760 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 863 +++++++++++++++++++++++++++++++++++++++
2 files changed, 1623 insertions(+)
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH V7 00/10] PM / OPP: Multiple regulator support
From: Viresh Kumar @ 2016-12-06 3:15 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Rafael Wysocki, Lists linaro-kernel,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Stephen Boyd,
Nishanth Menon, Vincent Guittot, Rob Herring, Dave Gerlach,
Mark Brown, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
In-Reply-To: <CAJZ5v0gykH+UwMvgU3SCVgxg9Ufe23zQ1o9bEvnjtafVqjLa8Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On 06-12-16, 02:34, Rafael J. Wysocki wrote:
> I've queued them up, but I'd feel more comfortable with an ACK or
> Reviewed-by on patch [6/10] too.
Sure. I would still encourage Stephen to do it. Seems he is very busy now a days
:)
Thanks.
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v3 4/4] pinctrl: aspeed: Fix kerneldoc return descriptions
From: Andrew Jeffery @ 2016-12-06 3:11 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Joel Stanley,
linux-gpio, devicetree, linux-kernel
In-Reply-To: <20161206031152.3004-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 782c5c97f853..76f62bd45f02 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -97,7 +97,7 @@ static inline void aspeed_sig_desc_print_val(
* @enabled: True to query the enabled state, false to query disabled state
* @regmap: The IP block's regmap instance
*
- * @return 1 if the descriptor's bitfield is configured to the state
+ * Return: 1 if the descriptor's bitfield is configured to the state
* selected by @enabled, 0 if not, and less than zero if an unrecoverable
* failure occurred
*
@@ -134,7 +134,7 @@ static int aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
* @enabled: True to query the enabled state, false to query disabled state
* @maps: The list of regmap instances
*
- * @return 1 if the expression composed by @enabled evaluates true, 0 if not,
+ * Return: 1 if the expression composed by @enabled evaluates true, 0 if not,
* and less than zero if an unrecoverable failure occurred.
*
* A mux function is enabled or disabled if the function's signal expression
@@ -175,7 +175,7 @@ static int aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
* expression, false to disable the function's signal
* @maps: The list of regmap instances for pinmux register access.
*
- * @return 0 if the expression is configured as requested and a negative error
+ * Return: 0 if the expression is configured as requested and a negative error
* code otherwise
*/
static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
@@ -256,7 +256,7 @@ static int aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
* @exprs: The list of signal expressions (from a priority level on a pin)
* @maps: The list of regmap instances for pinmux register access.
*
- * @return 0 if all expressions are disabled, otherwise a negative error code
+ * Return: 0 if all expressions are disabled, otherwise a negative error code
*/
static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
struct regmap * const *maps)
@@ -281,8 +281,8 @@ static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
* @exprs: List of signal expressions (haystack)
* @name: The name of the requested function (needle)
*
- * @return A pointer to the signal expression whose function tag matches the
- * provided name, otherwise NULL.
+ * Return: A pointer to the signal expression whose function tag matches the
+ * provided name, otherwise NULL.
*
*/
static const struct aspeed_sig_expr *aspeed_find_expr_by_name(
--
2.9.3
^ permalink raw reply related
* [PATCH v3 3/4] pinctrl: aspeed-g5: Add mux configuration for all pins
From: Andrew Jeffery @ 2016-12-06 3:11 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Joel Stanley,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161206031152.3004-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
The patch introducing the g5 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms and the AST2500 evaluation board.
Now, update the bindings document to reflect the complete functionality
and implement the necessary pin configuration tables in the driver.
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
Acked-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 17 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 1476 +++++++++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 1 +
3 files changed, 1487 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index f5c427d11337..f16be8fe6c76 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -53,10 +53,19 @@ VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
-GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
-I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
-TIMER7 TIMER8 VGABIOSROM
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4
+GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6
+I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME
+LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1
+NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2
+NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4
+PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10
+SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9
+SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0
+SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2
+TXD3 TXD4 UART6 USBCKI VGABIOSROM VGAHS VGAVS VPI24 VPO WDTRST1 WDTRST2
g4 Example:
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index c5c9a1b6fa1c..43221a3c7e23 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -25,14 +25,28 @@
#include "../pinctrl-utils.h"
#include "pinctrl-aspeed.h"
-#define ASPEED_G5_NR_PINS 228
+#define ASPEED_G5_NR_PINS 232
#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+/* LHCR0 is offset from the end of the H8S/2168-compatible registers */
+#define LHCR0 0x20
+#define GFX064 0x64
+
#define B14 0
SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+#define D14 1
+SSSF_PIN_DECL(D14, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
+#define D13 2
+SIG_EXPR_LIST_DECL_SINGLE(SPI1CS1, SPI1CS1, SIG_DESC_SET(SCU80, 15));
+SIG_EXPR_LIST_DECL_SINGLE(TIMER3, TIMER3, SIG_DESC_SET(SCU80, 2));
+MS_PIN_DECL(D13, GPIOA2, SPI1CS1, TIMER3);
+FUNC_GROUP_DECL(SPI1CS1, D13);
+FUNC_GROUP_DECL(TIMER3, D13);
+
#define E13 3
SSSF_PIN_DECL(E13, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
@@ -72,6 +86,32 @@ FUNC_GROUP_DECL(TIMER8, B13);
FUNC_GROUP_DECL(MDIO2, C13, B13);
+#define K19 8
+GPIO_PIN_DECL(K19, GPIOB0);
+
+#define L19 9
+GPIO_PIN_DECL(L19, GPIOB1);
+
+#define L18 10
+GPIO_PIN_DECL(L18, GPIOB2);
+
+#define K18 11
+GPIO_PIN_DECL(K18, GPIOB3);
+
+#define J20 12
+SSSF_PIN_DECL(J20, GPIOB4, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+
+#define H21 13
+#define H21_DESC SIG_DESC_SET(SCU80, 13)
+SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCSMI, LPCSMI, H21_DESC);
+MS_PIN_DECL(H21, GPIOB5, LPCPD, LPCSMI);
+FUNC_GROUP_DECL(LPCPD, H21);
+FUNC_GROUP_DECL(LPCSMI, H21);
+
+#define H22 14
+SSSF_PIN_DECL(H22, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+
#define H20 15
GPIO_PIN_DECL(H20, GPIOB7);
@@ -168,7 +208,44 @@ MS_PIN_DECL(D20, GPIOD3, SD2DAT1, GPID2OUT);
FUNC_GROUP_DECL(GPID2, F20, D20);
-#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 21)
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define D21 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(D21, GPIOD4, SD2DAT2, GPID4IN);
+
+#define E20 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(E20, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, D21, E20);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define G18 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(G18, GPIOD6, SD2CD, GPID6IN);
+
+#define C21 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(C21, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, G18, C21);
+FUNC_GROUP_DECL(SD2, F19, E21, F20, D20, D21, E20, G18, C21);
+
+#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define B20 32
@@ -177,6 +254,7 @@ SIG_EXPR_DECL(GPIE0IN, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0IN, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0IN, GPIE0, GPIE);
MS_PIN_DECL(B20, GPIOE0, NCTS3, GPIE0IN);
+FUNC_GROUP_DECL(NCTS3, B20);
#define C20 33
SIG_EXPR_LIST_DECL_SINGLE(NDCD3, NDCD3, SIG_DESC_SET(SCU80, 17));
@@ -184,9 +262,227 @@ SIG_EXPR_DECL(GPIE0OUT, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0OUT, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0OUT, GPIE0, GPIE);
MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
+FUNC_GROUP_DECL(NDCD3, C20);
FUNC_GROUP_DECL(GPIE0, B20, C20);
+#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
+
+#define F18 34
+SIG_EXPR_LIST_DECL_SINGLE(NDSR3, NDSR3, SIG_DESC_SET(SCU80, 18));
+SIG_EXPR_DECL(GPIE2IN, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2IN, GPIE2, GPIE);
+MS_PIN_DECL(F18, GPIOE2, NDSR3, GPIE2IN);
+FUNC_GROUP_DECL(NDSR3, F18);
+
+
+#define F17 35
+SIG_EXPR_LIST_DECL_SINGLE(NRI3, NRI3, SIG_DESC_SET(SCU80, 19));
+SIG_EXPR_DECL(GPIE2OUT, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2OUT, GPIE2, GPIE);
+MS_PIN_DECL(F17, GPIOE3, NRI3, GPIE2OUT);
+FUNC_GROUP_DECL(NRI3, F17);
+
+FUNC_GROUP_DECL(GPIE2, F18, F17);
+
+#define GPIE4_DESC SIG_DESC_SET(SCU8C, 14)
+
+#define E18 36
+SIG_EXPR_LIST_DECL_SINGLE(NDTR3, NDTR3, SIG_DESC_SET(SCU80, 20));
+SIG_EXPR_DECL(GPIE4IN, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4IN, GPIE4, GPIE);
+MS_PIN_DECL(E18, GPIOE4, NDTR3, GPIE4IN);
+FUNC_GROUP_DECL(NDTR3, E18);
+
+#define D19 37
+SIG_EXPR_LIST_DECL_SINGLE(NRTS3, NRTS3, SIG_DESC_SET(SCU80, 21));
+SIG_EXPR_DECL(GPIE4OUT, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4OUT, GPIE4, GPIE);
+MS_PIN_DECL(D19, GPIOE5, NRTS3, GPIE4OUT);
+FUNC_GROUP_DECL(NRTS3, D19);
+
+FUNC_GROUP_DECL(GPIE4, E18, D19);
+
+#define GPIE6_DESC SIG_DESC_SET(SCU8C, 15)
+
+#define A20 38
+SIG_EXPR_LIST_DECL_SINGLE(TXD3, TXD3, SIG_DESC_SET(SCU80, 22));
+SIG_EXPR_DECL(GPIE6IN, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6IN, GPIE6, GPIE);
+MS_PIN_DECL(A20, GPIOE6, TXD3, GPIE6IN);
+FUNC_GROUP_DECL(TXD3, A20);
+
+#define B19 39
+SIG_EXPR_LIST_DECL_SINGLE(RXD3, RXD3, SIG_DESC_SET(SCU80, 23));
+SIG_EXPR_DECL(GPIE6OUT, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6OUT, GPIE6, GPIE);
+MS_PIN_DECL(B19, GPIOE7, RXD3, GPIE6OUT);
+FUNC_GROUP_DECL(RXD3, B19);
+
+FUNC_GROUP_DECL(GPIE6, A20, B19);
+
+#define LPCHC_DESC SIG_DESC_IP_SET(ASPEED_IP_LPC, LHCR0, 0)
+#define LPCPLUS_DESC SIG_DESC_SET(SCU90, 30)
+
+#define J19 40
+SIG_EXPR_DECL(LHAD0, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD0, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD0, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS4, NCTS4, SIG_DESC_SET(SCU80, 24));
+MS_PIN_DECL(J19, GPIOF0, LHAD0, NCTS4);
+FUNC_GROUP_DECL(NCTS4, J19);
+
+#define J18 41
+SIG_EXPR_DECL(LHAD1, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD1, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD1, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD4, NDCD4, SIG_DESC_SET(SCU80, 25));
+MS_PIN_DECL(J18, GPIOF1, LHAD1, NDCD4);
+FUNC_GROUP_DECL(NDCD4, J18);
+
+#define B22 42
+SIG_EXPR_DECL(LHAD2, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD2, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD2, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+MS_PIN_DECL(B22, GPIOF2, LHAD2, NDSR4);
+FUNC_GROUP_DECL(NDSR4, B22);
+
+#define B21 43
+SIG_EXPR_DECL(LHAD3, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD3, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD3, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
+MS_PIN_DECL(B21, GPIOF3, LHAD3, NRI4);
+FUNC_GROUP_DECL(NRI4, B21);
+
+#define A21 44
+SIG_EXPR_DECL(LHCLK, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHCLK, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHCLK, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR4, NDTR4, SIG_DESC_SET(SCU80, 28));
+MS_PIN_DECL(A21, GPIOF4, LHCLK, NDTR4);
+FUNC_GROUP_DECL(NDTR4, A21);
+
+#define H19 45
+SIG_EXPR_DECL(LHFRAME, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHFRAME, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHFRAME, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS4, NRTS4, SIG_DESC_SET(SCU80, 29));
+MS_PIN_DECL(H19, GPIOF5, LHFRAME, NRTS4);
+FUNC_GROUP_DECL(NRTS4, H19);
+
+#define G17 46
+SIG_EXPR_LIST_DECL_SINGLE(LHSIRQ, LPCHC, LPCHC_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD4, TXD4, SIG_DESC_SET(SCU80, 30));
+MS_PIN_DECL(G17, GPIOF6, LHSIRQ, TXD4);
+FUNC_GROUP_DECL(TXD4, G17);
+
+#define H18 47
+SIG_EXPR_DECL(LHRST, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHRST, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHRST, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(RXD4, RXD4, SIG_DESC_SET(SCU80, 31));
+MS_PIN_DECL(H18, GPIOF7, LHRST, RXD4);
+FUNC_GROUP_DECL(RXD4, H18);
+
+FUNC_GROUP_DECL(LPCHC, J19, J18, B22, B21, A21, H19, G17, H18);
+FUNC_GROUP_DECL(LPCPLUS, J19, J18, B22, B21, A21, H19, H18);
+
+#define A19 48
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1CK, SGPS1, COND1, SIG_DESC_SET(SCU84, 0));
+SS_PIN_DECL(A19, GPIOG0, SGPS1CK);
+
+#define E19 49
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1LD, SGPS1, COND1, SIG_DESC_SET(SCU84, 1));
+SS_PIN_DECL(E19, GPIOG1, SGPS1LD);
+
+#define C19 50
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I0, SGPS1, COND1, SIG_DESC_SET(SCU84, 2));
+SS_PIN_DECL(C19, GPIOG2, SGPS1I0);
+
+#define E16 51
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I1, SGPS1, COND1, SIG_DESC_SET(SCU84, 3));
+SS_PIN_DECL(E16, GPIOG3, SGPS1I1);
+
+FUNC_GROUP_DECL(SGPS1, A19, E19, C19, E16);
+
+#define SGPS2_DESC SIG_DESC_SET(SCU94, 12)
+
+#define E17 52
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2CK, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT1, SALT1, COND1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(E17, GPIOG4, SGPS2CK, SALT1);
+FUNC_GROUP_DECL(SALT1, E17);
+
+#define D16 53
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2LD, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT2, SALT2, COND1, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(D16, GPIOG5, SGPS2LD, SALT2);
+FUNC_GROUP_DECL(SALT2, D16);
+
+#define D15 54
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I0, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT3, SALT3, COND1, SIG_DESC_SET(SCU84, 6));
+MS_PIN_DECL(D15, GPIOG6, SGPS2I0, SALT3);
+FUNC_GROUP_DECL(SALT3, D15);
+
+#define E14 55
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I1, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT4, SALT4, COND1, SIG_DESC_SET(SCU84, 7));
+MS_PIN_DECL(E14, GPIOG7, SGPS2I1, SALT4);
+FUNC_GROUP_DECL(SALT4, E14);
+
+FUNC_GROUP_DECL(SGPS2, E17, D16, D15, E14);
+
+#define UART6_DESC SIG_DESC_SET(SCU90, 7)
+
+#define A18 56
+SIG_EXPR_LIST_DECL_SINGLE(DASHA18, DASHA18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A18, GPIOH0, DASHA18, NCTS6);
+
+#define B18 57
+SIG_EXPR_LIST_DECL_SINGLE(DASHB18, DASHB18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B18, GPIOH1, DASHB18, NDCD6);
+
+#define D17 58
+SIG_EXPR_LIST_DECL_SINGLE(DASHD17, DASHD17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(D17, GPIOH2, DASHD17, NDSR6);
+
+#define C17 59
+SIG_EXPR_LIST_DECL_SINGLE(DASHC17, DASHC17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NRI6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(C17, GPIOH3, DASHC17, NRI6);
+
+#define A17 60
+SIG_EXPR_LIST_DECL_SINGLE(DASHA17, DASHA17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A17, GPIOH4, DASHA17, NDTR6);
+
+#define B17 61
+SIG_EXPR_LIST_DECL_SINGLE(DASHB17, DASHB17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B17, GPIOH5, DASHB17, NRTS6);
+
+#define A16 62
+SIG_EXPR_LIST_DECL_SINGLE(TXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(A16, GPIOH6, TXD6);
+
+#define D18 63
+SIG_EXPR_LIST_DECL_SINGLE(RXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(D18, GPIOH7, RXD6);
+
+FUNC_GROUP_DECL(UART6, A18, B18, D17, C17, A17, B17, A16, D18);
+
#define SPI1_DESC \
{ ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
#define SPI1DEBUG_DESC \
@@ -281,6 +577,30 @@ SS_PIN_DECL(N3, GPIOJ2, SGPMO);
SIG_EXPR_LIST_DECL_SINGLE(SGPMI, SGPM, SIG_DESC_SET(SCU84, 11));
SS_PIN_DECL(N4, GPIOJ3, SGPMI);
+#define N5 76
+SIG_EXPR_LIST_DECL_SINGLE(VGAHS, VGAHS, SIG_DESC_SET(SCU84, 12));
+SIG_EXPR_LIST_DECL_SINGLE(DASHN5, DASHN5, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(N5, GPIOJ4, VGAHS, DASHN5);
+FUNC_GROUP_DECL(VGAHS, N5);
+
+#define R4 77
+SIG_EXPR_LIST_DECL_SINGLE(VGAVS, VGAVS, SIG_DESC_SET(SCU84, 13));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR4, DASHR4, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(R4, GPIOJ5, VGAVS, DASHR4);
+FUNC_GROUP_DECL(VGAVS, R4);
+
+#define R3 78
+SIG_EXPR_LIST_DECL_SINGLE(DDCCLK, DDCCLK, SIG_DESC_SET(SCU84, 14));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR3, DASHR3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(R3, GPIOJ6, DDCCLK, DASHR3);
+FUNC_GROUP_DECL(DDCCLK, R3);
+
+#define T3 79
+SIG_EXPR_LIST_DECL_SINGLE(DDCDAT, DDCDAT, SIG_DESC_SET(SCU84, 15));
+SIG_EXPR_LIST_DECL_SINGLE(DASHT3, DASHT3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(T3, GPIOJ7, DDCDAT, DASHT3);
+FUNC_GROUP_DECL(DDCDAT, T3);
+
#define I2C5_DESC SIG_DESC_SET(SCU90, 18)
#define L3 80
@@ -329,11 +649,119 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
FUNC_GROUP_DECL(I2C8, P2, R1);
+#define T2 88
+SSSF_PIN_DECL(T2, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
+
#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
+#define VPI_24_RSVD_DESC SIG_DESC_SET(SCU90, 5)
+#define T1 89
+#define T1_DESC SIG_DESC_SET(SCU84, 17)
+SIG_EXPR_LIST_DECL_SINGLE(VPIDE, VPI24, VPI_24_RSVD_DESC, T1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD1, NDCD1, T1_DESC, COND2);
+MS_PIN_DECL(T1, GPIOL1, VPIDE, NDCD1);
+FUNC_GROUP_DECL(NDCD1, T1);
+
+#define U1 90
+#define U1_DESC SIG_DESC_SET(SCU84, 18)
+SIG_EXPR_LIST_DECL_SINGLE(DASHU1, VPI24, VPI_24_RSVD_DESC, U1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR1, NDSR1, U1_DESC);
+MS_PIN_DECL(U1, GPIOL2, DASHU1, NDSR1);
+FUNC_GROUP_DECL(NDSR1, U1);
+
+#define U2 91
+#define U2_DESC SIG_DESC_SET(SCU84, 19)
+SIG_EXPR_LIST_DECL_SINGLE(VPIHS, VPI24, VPI_24_RSVD_DESC, U2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI1, NRI1, U2_DESC, COND2);
+MS_PIN_DECL(U2, GPIOL3, VPIHS, NRI1);
+FUNC_GROUP_DECL(NRI1, U2);
+
+#define P4 92
+#define P4_DESC SIG_DESC_SET(SCU84, 20)
+SIG_EXPR_LIST_DECL_SINGLE(VPIVS, VPI24, VPI_24_RSVD_DESC, P4_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR1, NDTR1, P4_DESC, COND2);
+MS_PIN_DECL(P4, GPIOL4, VPIVS, NDTR1);
+FUNC_GROUP_DECL(NDTR1, P4);
+
+#define P3 93
+#define P3_DESC SIG_DESC_SET(SCU84, 21)
+SIG_EXPR_LIST_DECL_SINGLE(VPICLK, VPI24, VPI_24_RSVD_DESC, P3_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS1, NRTS1, P3_DESC, COND2);
+MS_PIN_DECL(P3, GPIOL5, VPICLK, NRTS1);
+FUNC_GROUP_DECL(NRTS1, P3);
+
+#define V1 94
+#define V1_DESC SIG_DESC_SET(SCU84, 22)
+SIG_EXPR_LIST_DECL_SINGLE(DASHV1, DASHV1, VPIRSVD_DESC, V1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD1, TXD1, V1_DESC, COND2);
+MS_PIN_DECL(V1, GPIOL6, DASHV1, TXD1);
+FUNC_GROUP_DECL(TXD1, V1);
+
+#define W1 95
+#define W1_DESC SIG_DESC_SET(SCU84, 23)
+SIG_EXPR_LIST_DECL_SINGLE(DASHW1, DASHW1, VPIRSVD_DESC, W1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, W1_DESC, COND2);
+MS_PIN_DECL(W1, GPIOL7, DASHW1, RXD1);
+FUNC_GROUP_DECL(RXD1, W1);
+
+#define Y1 96
+#define Y1_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB2, VPI24, VPI_24_RSVD_DESC, Y1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, Y1_DESC, COND2);
+MS_PIN_DECL(Y1, GPIOM0, VPIB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, Y1);
+
+#define AB2 97
+#define AB2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB3, VPI24, VPI_24_RSVD_DESC, AB2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, AB2_DESC, COND2);
+MS_PIN_DECL(AB2, GPIOM1, VPIB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, AB2);
+
+#define AA1 98
+#define AA1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB4, VPI24, VPI_24_RSVD_DESC, AA1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, AA1_DESC, COND2);
+MS_PIN_DECL(AA1, GPIOM2, VPIB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, AA1);
+
+#define Y2 99
+#define Y2_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB5, VPI24, VPI_24_RSVD_DESC, Y2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, Y2_DESC, COND2);
+MS_PIN_DECL(Y2, GPIOM3, VPIB5, NRI2);
+FUNC_GROUP_DECL(NRI2, Y2);
+
+#define AA2 100
+#define AA2_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB6, VPI24, VPI_24_RSVD_DESC, AA2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, AA2_DESC, COND2);
+MS_PIN_DECL(AA2, GPIOM4, VPIB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, AA2);
+
+#define P5 101
+#define P5_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB7, VPI24, VPI_24_RSVD_DESC, P5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, P5_DESC, COND2);
+MS_PIN_DECL(P5, GPIOM5, VPIB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, P5);
+
+#define R5 102
+#define R5_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB8, VPI24, VPI_24_RSVD_DESC, R5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, R5_DESC, COND2);
+MS_PIN_DECL(R5, GPIOM6, VPIB8, TXD2);
+FUNC_GROUP_DECL(TXD2, R5);
+
+#define T5 103
+#define T5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB9, VPI24, VPI_24_RSVD_DESC, T5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, T5_DESC, COND2);
+MS_PIN_DECL(T5, GPIOM7, VPIB9, RXD2);
+FUNC_GROUP_DECL(RXD2, T5);
#define V2 104
#define V2_DESC SIG_DESC_SET(SCU88, 0)
@@ -399,9 +827,88 @@ SIG_EXPR_LIST_DECL_SINGLE(PWM7, PWM7, T4_DESC, COND2);
MS_PIN_DECL(T4, GPION7, VPIG7, PWM7);
FUNC_GROUP_DECL(PWM7, T4);
+#define U5 112
+SIG_EXPR_LIST_DECL_SINGLE(VPIG8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 8),
+ COND2);
+SS_PIN_DECL(U5, GPIOO0, VPIG8);
+
+#define U4 113
+SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9),
+ COND2);
+SS_PIN_DECL(U4, GPIOO1, VPIG9);
+
+#define V5 114
+SIG_EXPR_LIST_DECL_SINGLE(DASHV5, DASHV5, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(V5, GPIOO2, DASHV5);
+
+#define AB4 115
+SIG_EXPR_LIST_DECL_SINGLE(DASHAB4, DASHAB4, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB4, GPIOO3, DASHAB4);
+
+#define AB3 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12),
+ COND2);
+SS_PIN_DECL(AB3, GPIOO4, VPIR2);
+
+#define Y4 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13),
+ COND2);
+SS_PIN_DECL(Y4, GPIOO5, VPIR3);
+
+#define AA4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14),
+ COND2);
+SS_PIN_DECL(AA4, GPIOO6, VPIR4);
+
+#define W4 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15),
+ COND2);
+SS_PIN_DECL(W4, GPIOO7, VPIR5);
+
+#define V4 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16),
+ COND2);
+SS_PIN_DECL(V4, GPIOP0, VPIR6);
+
+#define W5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17),
+ COND2);
+SS_PIN_DECL(W5, GPIOP1, VPIR7);
+
+#define AA5 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18),
+ COND2);
+SS_PIN_DECL(AA5, GPIOP2, VPIR8);
+
+#define AB5 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19),
+ COND2);
+SS_PIN_DECL(AB5, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI24, T1, U2, P4, P3, Y1, AB2, AA1, Y2, AA2, P5, R5, T5, V3,
+ U3, W3, AA3, Y3, T4, U5, U4, AB3, Y4, AA4, W4, V4, W5, AA5,
+ AB5);
+
+#define Y6 124
+SIG_EXPR_LIST_DECL_SINGLE(DASHY6, DASHY6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 20));
+SS_PIN_DECL(Y6, GPIOP4, DASHY6);
+
+#define Y5 125
+SIG_EXPR_LIST_DECL_SINGLE(DASHY5, DASHY5, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 21));
+SS_PIN_DECL(Y5, GPIOP5, DASHY5);
+
+#define W6 126
+SIG_EXPR_LIST_DECL_SINGLE(DASHW6, DASHW6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 22));
+SS_PIN_DECL(W6, GPIOP6, DASHW6);
+
#define V6 127
SIG_EXPR_LIST_DECL_SINGLE(DASHV6, DASHV6, SIG_DESC_SET(SCU90, 28),
- SIG_DESC_SET(SCU88, 23));
+ SIG_DESC_SET(SCU88, 23));
SS_PIN_DECL(V6, GPIOP7, DASHV6);
#define I2C3_DESC SIG_DESC_SET(SCU90, 16)
@@ -446,6 +953,24 @@ SSSF_PIN_DECL(B10, GPIOQ6, OSCCLK, SIG_DESC_SET(SCU2C, 1));
#define N20 135
SSSF_PIN_DECL(N20, GPIOQ7, PEWAKE, SIG_DESC_SET(SCU2C, 29));
+#define AA19 136
+SSSF_PIN_DECL(AA19, GPIOR0, FWSPICS1, SIG_DESC_SET(SCU88, 24), COND2);
+
+#define T19 137
+SSSF_PIN_DECL(T19, GPIOR1, FWSPICS2, SIG_DESC_SET(SCU88, 25), COND2);
+
+#define T17 138
+SSSF_PIN_DECL(T17, GPIOR2, SPI2CS0, SIG_DESC_SET(SCU88, 26), COND2);
+
+#define Y19 139
+SSSF_PIN_DECL(Y19, GPIOR3, SPI2CK, SIG_DESC_SET(SCU88, 27), COND2);
+
+#define W19 140
+SSSF_PIN_DECL(W19, GPIOR4, SPI2MOSI, SIG_DESC_SET(SCU88, 28), COND2);
+
+#define V19 141
+SSSF_PIN_DECL(V19, GPIOR5, SPI2MISO, SIG_DESC_SET(SCU88, 29), COND2);
+
#define D8 142
SIG_EXPR_LIST_DECL_SINGLE(MDC1, MDIO1, SIG_DESC_SET(SCU88, 30));
SS_PIN_DECL(D8, GPIOR6, MDC1);
@@ -456,6 +981,93 @@ SS_PIN_DECL(E10, GPIOR7, MDIO1);
FUNC_GROUP_DECL(MDIO1, D8, E10);
+#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define VPO_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
+#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
+#define VPOOFF2_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
+
+#define CRT_DVO_EN_DESC SIG_DESC_IP_SET(ASPEED_IP_GFX, GFX064, 7)
+
+#define V20 144
+#define V20_DESC SIG_DESC_SET(SCU8C, 0)
+SIG_EXPR_DECL(VPOB2, VPO, V20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, V20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF2, V20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO),
+ SIG_EXPR_PTR(VPOB2, VPOOFF1), SIG_EXPR_PTR(VPOB2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SPI2CS1, SPI2CS1, V20_DESC);
+MS_PIN_DECL(V20, GPIOS0, VPOB2, SPI2CS1);
+FUNC_GROUP_DECL(SPI2CS1, V20);
+
+#define U19 145
+#define U19_DESC SIG_DESC_SET(SCU8C, 1)
+SIG_EXPR_DECL(VPOB3, VPO, U19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, U19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF2, U19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO),
+ SIG_EXPR_PTR(VPOB3, VPOOFF1), SIG_EXPR_PTR(VPOB3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(BMCINT, BMCINT, U19_DESC);
+MS_PIN_DECL(U19, GPIOS1, VPOB3, BMCINT);
+FUNC_GROUP_DECL(BMCINT, U19);
+
+#define R18 146
+#define R18_DESC SIG_DESC_SET(SCU8C, 2)
+SIG_EXPR_DECL(VPOB4, VPO, R18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, R18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF2, R18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO),
+ SIG_EXPR_PTR(VPOB4, VPOOFF1), SIG_EXPR_PTR(VPOB4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT5, SALT5, R18_DESC);
+MS_PIN_DECL(R18, GPIOS2, VPOB4, SALT5);
+FUNC_GROUP_DECL(SALT5, R18);
+
+#define P18 147
+#define P18_DESC SIG_DESC_SET(SCU8C, 3)
+SIG_EXPR_DECL(VPOB5, VPO, P18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF2, P18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO),
+ SIG_EXPR_PTR(VPOB5, VPOOFF1), SIG_EXPR_PTR(VPOB5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT6, SALT6, P18_DESC);
+MS_PIN_DECL(P18, GPIOS3, VPOB5, SALT6);
+FUNC_GROUP_DECL(SALT6, P18);
+
+#define R19 148
+#define R19_DESC SIG_DESC_SET(SCU8C, 4)
+SIG_EXPR_DECL(VPOB6, VPO, R19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, R19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF2, R19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO),
+ SIG_EXPR_PTR(VPOB6, VPOOFF1), SIG_EXPR_PTR(VPOB6, VPOOFF2));
+SS_PIN_DECL(R19, GPIOS4, VPOB6);
+
+#define W20 149
+#define W20_DESC SIG_DESC_SET(SCU8C, 5)
+SIG_EXPR_DECL(VPOB7, VPO, W20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, W20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF2, W20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO),
+ SIG_EXPR_PTR(VPOB7, VPOOFF1), SIG_EXPR_PTR(VPOB7, VPOOFF2));
+SS_PIN_DECL(W20, GPIOS5, VPOB7);
+
+#define U20 150
+#define U20_DESC SIG_DESC_SET(SCU8C, 6)
+SIG_EXPR_DECL(VPOB8, VPO, U20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF1, U20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF2, U20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB8, SIG_EXPR_PTR(VPOB8, VPO),
+ SIG_EXPR_PTR(VPOB8, VPOOFF1), SIG_EXPR_PTR(VPOB8, VPOOFF2));
+SS_PIN_DECL(U20, GPIOS6, VPOB8);
+
+#define AA20 151
+#define AA20_DESC SIG_DESC_SET(SCU8C, 7)
+SIG_EXPR_DECL(VPOB9, VPO, AA20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF1, AA20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF2, AA20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB9, SIG_EXPR_PTR(VPOB9, VPO),
+ SIG_EXPR_PTR(VPOB9, VPOOFF1), SIG_EXPR_PTR(VPOB9, VPOOFF2));
+SS_PIN_DECL(AA20, GPIOS7, VPOB9);
+
/* RGMII1/RMII1 */
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
@@ -637,6 +1249,481 @@ MS_PIN_DECL_(E6, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
FUNC_GROUP_DECL(RGMII2, B2, B1, A2, B3, D5, D4, C2, C1, C3, D1, D2, E6);
FUNC_GROUP_DECL(RMII2, B2, B1, A2, B3, C2, C3, D1, D2, E6);
+#define F4 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(F4, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, F4);
+
+#define F5 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(F5, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, F5);
+
+#define E2 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(E2, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, E2);
+
+#define E1 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(E1, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, E1);
+
+#define F3 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(F3, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, F3);
+
+#define E3 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(E3, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, E3);
+
+#define G5 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(G5, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, G5);
+
+#define G4 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(G4, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, G4);
+
+#define F2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(F2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, F2);
+
+#define G3 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(G3, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, G3);
+
+#define G2 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(G2, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, G2);
+
+#define F1 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(F1, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, F1);
+
+#define H5 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(H5, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, H5);
+
+#define G1 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(G1, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, G1);
+
+#define H3 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(H3, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, H3);
+
+#define H4 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(H4, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, H4);
+
+#define ACPI_DESC SIG_DESC_SET(HW_STRAP1, 19)
+
+#define R22 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR22, DASHR22, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R22, GPIOY0, SIOS3, DASHR22);
+FUNC_GROUP_DECL(SIOS3, R22);
+
+#define R21 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR21, DASHR21, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R21, GPIOY1, SIOS5, DASHR21);
+FUNC_GROUP_DECL(SIOS5, R21);
+
+#define P22 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP22, DASHP22, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P22, GPIOY2, SIOPWREQ, DASHP22);
+FUNC_GROUP_DECL(SIOPWREQ, P22);
+
+#define P21 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP21, DASHP21, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P21, GPIOY3, SIOONCTRL, DASHP21);
+FUNC_GROUP_DECL(SIOONCTRL, P21);
+
+#define M18 196
+SSSF_PIN_DECL(M18, GPIOY4, SCL1, SIG_DESC_SET(SCUA4, 12));
+
+#define M19 197
+SSSF_PIN_DECL(M19, GPIOY5, SDA1, SIG_DESC_SET(SCUA4, 13));
+
+#define M20 198
+SSSF_PIN_DECL(M20, GPIOY6, SCL2, SIG_DESC_SET(SCUA4, 14));
+
+#define P20 199
+SSSF_PIN_DECL(P20, GPIOY7, SDA2, SIG_DESC_SET(SCUA4, 15));
+
+#define PNOR_DESC SIG_DESC_SET(SCU90, 31)
+
+#define Y20 200
+#define Y20_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(VPOG2, VPO, Y20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, Y20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF2, Y20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO),
+ SIG_EXPR_PTR(VPOG2, VPOOFF1), SIG_EXPR_PTR(VPOG2, VPOOFF2));
+SIG_EXPR_DECL(SIOPBI, SIOPBI, Y20_DESC);
+SIG_EXPR_DECL(SIOPBI, ACPI, Y20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBI, SIOPBI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ0, GPIOZ0);
+MS_PIN_DECL_(Y20, SIG_EXPR_LIST_PTR(VPOG2), SIG_EXPR_LIST_PTR(SIOPBI),
+ SIG_EXPR_LIST_PTR(NORA0), SIG_EXPR_LIST_PTR(GPIOZ0));
+FUNC_GROUP_DECL(SIOPBI, Y20);
+
+#define AB20 201
+#define AB20_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(VPOG3, VPO, AB20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, AB20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF2, AB20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO),
+ SIG_EXPR_PTR(VPOG3, VPOOFF1), SIG_EXPR_PTR(VPOG3, VPOOFF2));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, AB20_DESC);
+SIG_EXPR_DECL(SIOPWRGD, ACPI, AB20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ1, GPIOZ1);
+MS_PIN_DECL_(AB20, SIG_EXPR_LIST_PTR(VPOG3), SIG_EXPR_LIST_PTR(SIOPWRGD),
+ SIG_EXPR_LIST_PTR(NORA1), SIG_EXPR_LIST_PTR(GPIOZ1));
+FUNC_GROUP_DECL(SIOPWRGD, AB20);
+
+#define AB21 202
+#define AB21_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(VPOG4, VPO, AB21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, AB21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF2, AB21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG4, SIG_EXPR_PTR(VPOG4, VPO),
+ SIG_EXPR_PTR(VPOG4, VPOOFF1), SIG_EXPR_PTR(VPOG4, VPOOFF2));
+SIG_EXPR_DECL(SIOPBO, SIOPBO, AB21_DESC);
+SIG_EXPR_DECL(SIOPBO, ACPI, AB21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBO, SIOPBO, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ2, GPIOZ2);
+MS_PIN_DECL_(AB21, SIG_EXPR_LIST_PTR(VPOG4), SIG_EXPR_LIST_PTR(SIOPBO),
+ SIG_EXPR_LIST_PTR(NORA2), SIG_EXPR_LIST_PTR(GPIOZ2));
+FUNC_GROUP_DECL(SIOPBO, AB21);
+
+#define AA21 203
+#define AA21_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(VPOG5, VPO, AA21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, AA21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF2, AA21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG5, SIG_EXPR_PTR(VPOG5, VPO),
+ SIG_EXPR_PTR(VPOG5, VPOOFF1), SIG_EXPR_PTR(VPOG5, VPOOFF2));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, AA21_DESC);
+SIG_EXPR_DECL(SIOSCI, ACPI, AA21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ3, GPIOZ3);
+MS_PIN_DECL_(AA21, SIG_EXPR_LIST_PTR(VPOG5), SIG_EXPR_LIST_PTR(SIOSCI),
+ SIG_EXPR_LIST_PTR(NORA3), SIG_EXPR_LIST_PTR(GPIOZ3));
+FUNC_GROUP_DECL(SIOSCI, AA21);
+
+FUNC_GROUP_DECL(ACPI, R22, R21, P22, P21, Y20, AB20, AB21, AA21);
+
+/* CRT DVO disabled, configured for single-edge mode */
+#define CRT_DVO_DS_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 0, 0 }
+
+/* CRT DVO disabled, configured for dual-edge mode */
+#define CRT_DVO_DD_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 1, 1 }
+
+/* CRT DVO enabled, configured for single-edge mode */
+#define CRT_DVO_ES_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 2, 2 }
+
+/* CRT DVO enabled, configured for dual-edge mode */
+#define CRT_DVO_ED_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 3, 3 }
+
+#define U21 204
+#define U21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(VPOG6, VPO, U21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, U21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF2, U21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG6, SIG_EXPR_PTR(VPOG6, VPO),
+ SIG_EXPR_PTR(VPOG6, VPOOFF1), SIG_EXPR_PTR(VPOG6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA4, PNOR, PNOR_DESC);
+MS_PIN_DECL(U21, GPIOZ4, VPOG6, NORA4);
+
+#define W22 205
+#define W22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(VPOG7, VPO, W22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, W22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF2, W22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG7, SIG_EXPR_PTR(VPOG7, VPO),
+ SIG_EXPR_PTR(VPOG7, VPOOFF1), SIG_EXPR_PTR(VPOG7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA5, PNOR, PNOR_DESC);
+MS_PIN_DECL(W22, GPIOZ5, VPOG7, NORA5);
+
+#define V22 206
+#define V22_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(VPOG8, VPO, V22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF1, V22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF2, V22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG8, SIG_EXPR_PTR(VPOG8, VPO),
+ SIG_EXPR_PTR(VPOG8, VPOOFF1), SIG_EXPR_PTR(VPOG8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA6, PNOR, PNOR_DESC);
+MS_PIN_DECL(V22, GPIOZ6, VPOG8, NORA6);
+
+#define W21 207
+#define W21_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(VPOG9, VPO, W21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF1, W21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF2, W21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG9, SIG_EXPR_PTR(VPOG9, VPO),
+ SIG_EXPR_PTR(VPOG9, VPOOFF1), SIG_EXPR_PTR(VPOG9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA7, PNOR, PNOR_DESC);
+MS_PIN_DECL(W21, GPIOZ7, VPOG9, NORA7);
+
+#define Y21 208
+#define Y21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(VPOR2, VPO, Y21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, Y21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF2, Y21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR2, SIG_EXPR_PTR(VPOR2, VPO),
+ SIG_EXPR_PTR(VPOR2, VPOOFF1), SIG_EXPR_PTR(VPOR2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT7, SALT7, Y21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA0, GPIOAA0);
+MS_PIN_DECL_(Y21, SIG_EXPR_LIST_PTR(VPOR2), SIG_EXPR_LIST_PTR(SALT7),
+ SIG_EXPR_LIST_PTR(NORD0), SIG_EXPR_LIST_PTR(GPIOAA0));
+FUNC_GROUP_DECL(SALT7, Y21);
+
+#define V21 209
+#define V21_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(VPOR3, VPO, V21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, V21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF2, V21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR3, SIG_EXPR_PTR(VPOR3, VPO),
+ SIG_EXPR_PTR(VPOR3, VPOOFF1), SIG_EXPR_PTR(VPOR3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT8, SALT8, V21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA1, GPIOAA1);
+MS_PIN_DECL_(V21, SIG_EXPR_LIST_PTR(VPOR3), SIG_EXPR_LIST_PTR(SALT8),
+ SIG_EXPR_LIST_PTR(NORD1), SIG_EXPR_LIST_PTR(GPIOAA1));
+FUNC_GROUP_DECL(SALT8, V21);
+
+#define Y22 210
+#define Y22_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(VPOR4, VPO, Y22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF1, Y22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF2, Y22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR4, SIG_EXPR_PTR(VPOR4, VPO),
+ SIG_EXPR_PTR(VPOR4, VPOOFF1), SIG_EXPR_PTR(VPOR4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT9, SALT9, Y22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA2, GPIOAA2);
+MS_PIN_DECL_(Y22, SIG_EXPR_LIST_PTR(VPOR4), SIG_EXPR_LIST_PTR(SALT9),
+ SIG_EXPR_LIST_PTR(NORD2), SIG_EXPR_LIST_PTR(GPIOAA2));
+FUNC_GROUP_DECL(SALT9, Y22);
+
+#define AA22 211
+#define AA22_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(VPOR5, VPO, AA22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF1, AA22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF2, AA22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR5, SIG_EXPR_PTR(VPOR5, VPO),
+ SIG_EXPR_PTR(VPOR5, VPOOFF1), SIG_EXPR_PTR(VPOR5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT10, SALT10, AA22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA3, GPIOAA3);
+MS_PIN_DECL_(AA22, SIG_EXPR_LIST_PTR(VPOR5), SIG_EXPR_LIST_PTR(SALT10),
+ SIG_EXPR_LIST_PTR(NORD3), SIG_EXPR_LIST_PTR(GPIOAA3));
+FUNC_GROUP_DECL(SALT10, AA22);
+
+#define U22 212
+#define U22_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(VPOR6, VPO, U22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF1, U22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF2, U22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR6, SIG_EXPR_PTR(VPOR6, VPO),
+ SIG_EXPR_PTR(VPOR6, VPOOFF1), SIG_EXPR_PTR(VPOR6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT11, SALT11, U22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD4, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA4, GPIOAA4);
+MS_PIN_DECL_(U22, SIG_EXPR_LIST_PTR(VPOR6), SIG_EXPR_LIST_PTR(SALT11),
+ SIG_EXPR_LIST_PTR(NORD4), SIG_EXPR_LIST_PTR(GPIOAA4));
+FUNC_GROUP_DECL(SALT11, U22);
+
+#define T20 213
+#define T20_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(VPOR7, VPO, T20_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF1, T20_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF2, T20_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR7, SIG_EXPR_PTR(VPOR7, VPO),
+ SIG_EXPR_PTR(VPOR7, VPOOFF1), SIG_EXPR_PTR(VPOR7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT12, SALT12, T20_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD5, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA5, GPIOAA5);
+MS_PIN_DECL_(T20, SIG_EXPR_LIST_PTR(VPOR7), SIG_EXPR_LIST_PTR(SALT12),
+ SIG_EXPR_LIST_PTR(NORD5), SIG_EXPR_LIST_PTR(GPIOAA5));
+FUNC_GROUP_DECL(SALT12, T20);
+
+#define N18 214
+#define N18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(VPOR8, VPO, N18_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF1, N18_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF2, N18_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR8, SIG_EXPR_PTR(VPOR8, VPO),
+ SIG_EXPR_PTR(VPOR8, VPOOFF1), SIG_EXPR_PTR(VPOR8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT13, SALT13, N18_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD6, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA6, GPIOAA6);
+MS_PIN_DECL_(N18, SIG_EXPR_LIST_PTR(VPOR8), SIG_EXPR_LIST_PTR(SALT13),
+ SIG_EXPR_LIST_PTR(NORD6), SIG_EXPR_LIST_PTR(GPIOAA6));
+FUNC_GROUP_DECL(SALT13, N18);
+
+#define P19 215
+#define P19_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(VPOR9, VPO, P19_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF1, P19_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF2, P19_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR9, SIG_EXPR_PTR(VPOR9, VPO),
+ SIG_EXPR_PTR(VPOR9, VPOOFF1), SIG_EXPR_PTR(VPOR9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT14, SALT14, P19_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD7, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA7, GPIOAA7);
+MS_PIN_DECL_(P19, SIG_EXPR_LIST_PTR(VPOR9), SIG_EXPR_LIST_PTR(SALT14),
+ SIG_EXPR_LIST_PTR(NORD7), SIG_EXPR_LIST_PTR(GPIOAA7));
+FUNC_GROUP_DECL(SALT14, P19);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(VPODE, VPO, N19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF1, N19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF2, N19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPODE, SIG_EXPR_PTR(VPODE, VPO),
+ SIG_EXPR_PTR(VPODE, VPOOFF1), SIG_EXPR_PTR(VPODE, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NOROE, PNOR, PNOR_DESC);
+MS_PIN_DECL(N19, GPIOAB0, VPODE, NOROE);
+
+#define T21 217
+#define T21_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(VPOHS, VPO, T21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF1, T21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF2, T21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOHS, SIG_EXPR_PTR(VPOHS, VPO),
+ SIG_EXPR_PTR(VPOHS, VPOOFF1), SIG_EXPR_PTR(VPOHS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORWE, PNOR, PNOR_DESC);
+MS_PIN_DECL(T21, GPIOAB1, VPOHS, NORWE);
+
+FUNC_GROUP_DECL(PNOR, Y20, AB20, AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22,
+ AA22, U22, T20, N18, P19, N19, T21);
+
+#define T22 218
+#define T22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(VPOVS, VPO, T22_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF1, T22_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF2, T22_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOVS, SIG_EXPR_PTR(VPOVS, VPO),
+ SIG_EXPR_PTR(VPOVS, VPOOFF1), SIG_EXPR_PTR(VPOVS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, T22_DESC);
+MS_PIN_DECL(T22, GPIOAB2, VPOVS, WDTRST1);
+FUNC_GROUP_DECL(WDTRST1, T22);
+
+#define R20 219
+#define R20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(VPOCLK, VPO, R20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF1, R20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF2, R20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOCLK, SIG_EXPR_PTR(VPOCLK, VPO),
+ SIG_EXPR_PTR(VPOCLK, VPOOFF1), SIG_EXPR_PTR(VPOCLK, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, R20_DESC);
+MS_PIN_DECL(R20, GPIOAB3, VPOCLK, WDTRST2);
+FUNC_GROUP_DECL(WDTRST2, R20);
+
+FUNC_GROUP_DECL(VPO, V20, U19, R18, P18, R19, W20, U20, AA20, Y20, AB20,
+ AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22, AA22, U22, T20,
+ N18, P19, N19, T21, T22, R20);
+
+#define ESPI_DESC SIG_DESC_SET(HW_STRAP1, 25)
+
+#define G21 224
+SIG_EXPR_LIST_DECL_SINGLE(ESPID0, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD0, LAD0, SIG_DESC_SET(SCUAC, 0));
+MS_PIN_DECL(G21, GPIOAC0, ESPID0, LAD0);
+FUNC_GROUP_DECL(LAD0, G21);
+
+#define G20 225
+SIG_EXPR_LIST_DECL_SINGLE(ESPID1, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD1, LAD1, SIG_DESC_SET(SCUAC, 1));
+MS_PIN_DECL(G20, GPIOAC1, ESPID1, LAD1);
+FUNC_GROUP_DECL(LAD1, G20);
+
+#define D22 226
+SIG_EXPR_LIST_DECL_SINGLE(ESPID2, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD2, LAD2, SIG_DESC_SET(SCUAC, 2));
+MS_PIN_DECL(D22, GPIOAC2, ESPID2, LAD2);
+FUNC_GROUP_DECL(LAD2, D22);
+
+#define E22 227
+SIG_EXPR_LIST_DECL_SINGLE(ESPID3, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD3, LAD3, SIG_DESC_SET(SCUAC, 3));
+MS_PIN_DECL(E22, GPIOAC3, ESPID3, LAD3);
+FUNC_GROUP_DECL(LAD3, E22);
+
+#define C22 228
+SIG_EXPR_LIST_DECL_SINGLE(ESPICK, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LCLK, LCLK, SIG_DESC_SET(SCUAC, 4));
+MS_PIN_DECL(C22, GPIOAC4, ESPICK, LCLK);
+FUNC_GROUP_DECL(LCLK, C22);
+
+#define F21 229
+SIG_EXPR_LIST_DECL_SINGLE(ESPICS, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LFRAME, LFRAME, SIG_DESC_SET(SCUAC, 5));
+MS_PIN_DECL(F21, GPIOAC5, ESPICS, LFRAME);
+FUNC_GROUP_DECL(LFRAME, F21);
+
+#define F22 230
+SIG_EXPR_LIST_DECL_SINGLE(ESPIALT, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LSIRQ, LSIRQ, SIG_DESC_SET(SCUAC, 6));
+MS_PIN_DECL(F22, GPIOAC6, ESPIALT, LSIRQ);
+FUNC_GROUP_DECL(LSIRQ, F22);
+
+#define G22 231
+SIG_EXPR_LIST_DECL_SINGLE(ESPIRST, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCRST, LPCRST, SIG_DESC_SET(SCUAC, 7));
+MS_PIN_DECL(G22, GPIOAC7, ESPIRST, LPCRST);
+FUNC_GROUP_DECL(LPCRST, G22);
+
+FUNC_GROUP_DECL(ESPI, G21, G20, D22, E22, C22, F21, F22, G22);
+
/* Pins, groups and functions are sort(1):ed alphabetically for sanity */
static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
@@ -646,12 +1733,32 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(A13),
ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
+ ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
+ ASPEED_PINCTRL_PIN(A21),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
+ ASPEED_PINCTRL_PIN(AA19),
+ ASPEED_PINCTRL_PIN(AA2),
+ ASPEED_PINCTRL_PIN(AA20),
+ ASPEED_PINCTRL_PIN(AA21),
+ ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB20),
+ ASPEED_PINCTRL_PIN(AB21),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
ASPEED_PINCTRL_PIN(B1),
ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
@@ -660,8 +1767,13 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
+ ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
ASPEED_PINCTRL_PIN(B20),
+ ASPEED_PINCTRL_PIN(B21),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
ASPEED_PINCTRL_PIN(B5),
@@ -673,62 +1785,210 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
ASPEED_PINCTRL_PIN(C16),
+ ASPEED_PINCTRL_PIN(C17),
ASPEED_PINCTRL_PIN(C18),
+ ASPEED_PINCTRL_PIN(C19),
ASPEED_PINCTRL_PIN(C2),
ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(D1),
ASPEED_PINCTRL_PIN(D10),
+ ASPEED_PINCTRL_PIN(D13),
+ ASPEED_PINCTRL_PIN(D14),
+ ASPEED_PINCTRL_PIN(D15),
+ ASPEED_PINCTRL_PIN(D16),
+ ASPEED_PINCTRL_PIN(D17),
+ ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D20),
+ ASPEED_PINCTRL_PIN(D21),
+ ASPEED_PINCTRL_PIN(D22),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
ASPEED_PINCTRL_PIN(D8),
ASPEED_PINCTRL_PIN(D9),
+ ASPEED_PINCTRL_PIN(E1),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E12),
ASPEED_PINCTRL_PIN(E13),
+ ASPEED_PINCTRL_PIN(E14),
ASPEED_PINCTRL_PIN(E15),
+ ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E17),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
+ ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E21),
+ ASPEED_PINCTRL_PIN(E22),
+ ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F1),
+ ASPEED_PINCTRL_PIN(F17),
+ ASPEED_PINCTRL_PIN(F18),
ASPEED_PINCTRL_PIN(F19),
+ ASPEED_PINCTRL_PIN(F2),
ASPEED_PINCTRL_PIN(F20),
+ ASPEED_PINCTRL_PIN(F21),
+ ASPEED_PINCTRL_PIN(F22),
+ ASPEED_PINCTRL_PIN(F3),
+ ASPEED_PINCTRL_PIN(F4),
+ ASPEED_PINCTRL_PIN(F5),
ASPEED_PINCTRL_PIN(F9),
+ ASPEED_PINCTRL_PIN(G1),
+ ASPEED_PINCTRL_PIN(G17),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G2),
+ ASPEED_PINCTRL_PIN(G20),
+ ASPEED_PINCTRL_PIN(G21),
+ ASPEED_PINCTRL_PIN(G22),
+ ASPEED_PINCTRL_PIN(G3),
+ ASPEED_PINCTRL_PIN(G4),
+ ASPEED_PINCTRL_PIN(G5),
+ ASPEED_PINCTRL_PIN(H18),
+ ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H21),
+ ASPEED_PINCTRL_PIN(H22),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(H5),
+ ASPEED_PINCTRL_PIN(J18),
+ ASPEED_PINCTRL_PIN(J19),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K19),
ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
ASPEED_PINCTRL_PIN(L2),
ASPEED_PINCTRL_PIN(L3),
ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M20),
ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
ASPEED_PINCTRL_PIN(N2),
ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
ASPEED_PINCTRL_PIN(N22),
ASPEED_PINCTRL_PIN(N3),
ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
ASPEED_PINCTRL_PIN(P1),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
ASPEED_PINCTRL_PIN(P2),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P3),
+ ASPEED_PINCTRL_PIN(P4),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R1),
+ ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R19),
+ ASPEED_PINCTRL_PIN(R2),
+ ASPEED_PINCTRL_PIN(R20),
+ ASPEED_PINCTRL_PIN(R21),
+ ASPEED_PINCTRL_PIN(R22),
+ ASPEED_PINCTRL_PIN(R3),
+ ASPEED_PINCTRL_PIN(R4),
+ ASPEED_PINCTRL_PIN(R5),
+ ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T17),
+ ASPEED_PINCTRL_PIN(T19),
+ ASPEED_PINCTRL_PIN(T2),
+ ASPEED_PINCTRL_PIN(T20),
+ ASPEED_PINCTRL_PIN(T21),
+ ASPEED_PINCTRL_PIN(T22),
+ ASPEED_PINCTRL_PIN(T3),
ASPEED_PINCTRL_PIN(T4),
+ ASPEED_PINCTRL_PIN(T5),
+ ASPEED_PINCTRL_PIN(U1),
+ ASPEED_PINCTRL_PIN(U19),
+ ASPEED_PINCTRL_PIN(U2),
+ ASPEED_PINCTRL_PIN(U20),
+ ASPEED_PINCTRL_PIN(U21),
+ ASPEED_PINCTRL_PIN(U22),
ASPEED_PINCTRL_PIN(U3),
+ ASPEED_PINCTRL_PIN(U4),
+ ASPEED_PINCTRL_PIN(U5),
+ ASPEED_PINCTRL_PIN(V1),
+ ASPEED_PINCTRL_PIN(V19),
ASPEED_PINCTRL_PIN(V2),
+ ASPEED_PINCTRL_PIN(V20),
+ ASPEED_PINCTRL_PIN(V21),
+ ASPEED_PINCTRL_PIN(V22),
ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W19),
ASPEED_PINCTRL_PIN(W2),
+ ASPEED_PINCTRL_PIN(W20),
+ ASPEED_PINCTRL_PIN(W21),
+ ASPEED_PINCTRL_PIN(W22),
ASPEED_PINCTRL_PIN(W3),
+ ASPEED_PINCTRL_PIN(W4),
+ ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y19),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y20),
+ ASPEED_PINCTRL_PIN(Y21),
+ ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
+ ASPEED_PINCTRL_PIN(Y4),
+ ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
};
static const struct aspeed_pin_group aspeed_g5_groups[] = {
+ ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
+ ASPEED_PINCTRL_GROUP(BMCINT),
+ ASPEED_PINCTRL_GROUP(DDCCLK),
+ ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(ESPI),
+ ASPEED_PINCTRL_GROUP(FWSPICS1),
+ ASPEED_PINCTRL_GROUP(FWSPICS2),
ASPEED_PINCTRL_GROUP(GPID0),
ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
+ ASPEED_PINCTRL_GROUP(GPIE2),
+ ASPEED_PINCTRL_GROUP(GPIE4),
+ ASPEED_PINCTRL_GROUP(GPIE6),
ASPEED_PINCTRL_GROUP(I2C10),
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
@@ -741,11 +2001,50 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(I2C7),
ASPEED_PINCTRL_GROUP(I2C8),
ASPEED_PINCTRL_GROUP(I2C9),
+ ASPEED_PINCTRL_GROUP(LAD0),
+ ASPEED_PINCTRL_GROUP(LAD1),
+ ASPEED_PINCTRL_GROUP(LAD2),
+ ASPEED_PINCTRL_GROUP(LAD3),
+ ASPEED_PINCTRL_GROUP(LCLK),
+ ASPEED_PINCTRL_GROUP(LFRAME),
+ ASPEED_PINCTRL_GROUP(LPCHC),
+ ASPEED_PINCTRL_GROUP(LPCPD),
+ ASPEED_PINCTRL_GROUP(LPCPLUS),
+ ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
+ ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(LSIRQ),
ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
+ ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
+ ASPEED_PINCTRL_GROUP(NCTS3),
+ ASPEED_PINCTRL_GROUP(NCTS4),
+ ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
+ ASPEED_PINCTRL_GROUP(NDCD3),
+ ASPEED_PINCTRL_GROUP(NDCD4),
+ ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
+ ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
+ ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
+ ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
+ ASPEED_PINCTRL_GROUP(NRI3),
+ ASPEED_PINCTRL_GROUP(NRI4),
+ ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
+ ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(NRTS4),
ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PEWAKE),
+ ASPEED_PINCTRL_GROUP(PNOR),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -758,22 +2057,102 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
ASPEED_PINCTRL_GROUP(RMII2),
+ ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
+ ASPEED_PINCTRL_GROUP(RXD3),
+ ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT10),
+ ASPEED_PINCTRL_GROUP(SALT11),
+ ASPEED_PINCTRL_GROUP(SALT12),
+ ASPEED_PINCTRL_GROUP(SALT13),
+ ASPEED_PINCTRL_GROUP(SALT14),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
+ ASPEED_PINCTRL_GROUP(SALT5),
+ ASPEED_PINCTRL_GROUP(SALT6),
+ ASPEED_PINCTRL_GROUP(SALT7),
+ ASPEED_PINCTRL_GROUP(SALT8),
+ ASPEED_PINCTRL_GROUP(SALT9),
+ ASPEED_PINCTRL_GROUP(SCL1),
+ ASPEED_PINCTRL_GROUP(SCL2),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SDA1),
+ ASPEED_PINCTRL_GROUP(SDA2),
+ ASPEED_PINCTRL_GROUP(SGPS1),
+ ASPEED_PINCTRL_GROUP(SGPS2),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
+ ASPEED_PINCTRL_GROUP(SIOPBI),
+ ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1CS1),
ASPEED_PINCTRL_GROUP(SPI1DEBUG),
ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPI2CK),
+ ASPEED_PINCTRL_GROUP(SPI2CS0),
+ ASPEED_PINCTRL_GROUP(SPI2CS1),
+ ASPEED_PINCTRL_GROUP(SPI2MISO),
+ ASPEED_PINCTRL_GROUP(SPI2MOSI),
+ ASPEED_PINCTRL_GROUP(TIMER3),
ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
+ ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
+ ASPEED_PINCTRL_GROUP(TXD3),
+ ASPEED_PINCTRL_GROUP(TXD4),
+ ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
ASPEED_PINCTRL_GROUP(VGABIOSROM),
+ ASPEED_PINCTRL_GROUP(VGAHS),
+ ASPEED_PINCTRL_GROUP(VGAVS),
+ ASPEED_PINCTRL_GROUP(VPI24),
+ ASPEED_PINCTRL_GROUP(VPO),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g5_functions[] = {
+ ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
+ ASPEED_PINCTRL_FUNC(BMCINT),
+ ASPEED_PINCTRL_FUNC(DDCCLK),
+ ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(ESPI),
+ ASPEED_PINCTRL_FUNC(FWSPICS1),
+ ASPEED_PINCTRL_FUNC(FWSPICS2),
ASPEED_PINCTRL_FUNC(GPID0),
ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
+ ASPEED_PINCTRL_FUNC(GPIE2),
+ ASPEED_PINCTRL_FUNC(GPIE4),
+ ASPEED_PINCTRL_FUNC(GPIE6),
ASPEED_PINCTRL_FUNC(I2C10),
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
@@ -786,11 +2165,50 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(I2C7),
ASPEED_PINCTRL_FUNC(I2C8),
ASPEED_PINCTRL_FUNC(I2C9),
+ ASPEED_PINCTRL_FUNC(LAD0),
+ ASPEED_PINCTRL_FUNC(LAD1),
+ ASPEED_PINCTRL_FUNC(LAD2),
+ ASPEED_PINCTRL_FUNC(LAD3),
+ ASPEED_PINCTRL_FUNC(LCLK),
+ ASPEED_PINCTRL_FUNC(LFRAME),
+ ASPEED_PINCTRL_FUNC(LPCHC),
+ ASPEED_PINCTRL_FUNC(LPCPD),
+ ASPEED_PINCTRL_FUNC(LPCPLUS),
+ ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
+ ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(LSIRQ),
ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
+ ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
+ ASPEED_PINCTRL_FUNC(NCTS3),
+ ASPEED_PINCTRL_FUNC(NCTS4),
+ ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
+ ASPEED_PINCTRL_FUNC(NDCD3),
+ ASPEED_PINCTRL_FUNC(NDCD4),
+ ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
+ ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
+ ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
+ ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
+ ASPEED_PINCTRL_FUNC(NRI3),
+ ASPEED_PINCTRL_FUNC(NRI4),
+ ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
+ ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(NRTS4),
ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PEWAKE),
+ ASPEED_PINCTRL_FUNC(PNOR),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -803,16 +2221,68 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
ASPEED_PINCTRL_FUNC(RMII2),
+ ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
+ ASPEED_PINCTRL_FUNC(RXD3),
+ ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT10),
+ ASPEED_PINCTRL_FUNC(SALT11),
+ ASPEED_PINCTRL_FUNC(SALT12),
+ ASPEED_PINCTRL_FUNC(SALT13),
+ ASPEED_PINCTRL_FUNC(SALT14),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
+ ASPEED_PINCTRL_FUNC(SALT5),
+ ASPEED_PINCTRL_FUNC(SALT6),
+ ASPEED_PINCTRL_FUNC(SALT7),
+ ASPEED_PINCTRL_FUNC(SALT8),
+ ASPEED_PINCTRL_FUNC(SALT9),
+ ASPEED_PINCTRL_FUNC(SCL1),
+ ASPEED_PINCTRL_FUNC(SCL2),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SDA1),
+ ASPEED_PINCTRL_FUNC(SDA2),
+ ASPEED_PINCTRL_FUNC(SGPS1),
+ ASPEED_PINCTRL_FUNC(SGPS2),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
+ ASPEED_PINCTRL_FUNC(SIOPBI),
+ ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1CS1),
ASPEED_PINCTRL_FUNC(SPI1DEBUG),
ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPI2CK),
+ ASPEED_PINCTRL_FUNC(SPI2CS0),
+ ASPEED_PINCTRL_FUNC(SPI2CS1),
+ ASPEED_PINCTRL_FUNC(SPI2MISO),
+ ASPEED_PINCTRL_FUNC(SPI2MOSI),
+ ASPEED_PINCTRL_FUNC(TIMER3),
ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
+ ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
+ ASPEED_PINCTRL_FUNC(TXD3),
+ ASPEED_PINCTRL_FUNC(TXD4),
+ ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
ASPEED_PINCTRL_FUNC(VGABIOSROM),
+ ASPEED_PINCTRL_FUNC(VGAHS),
+ ASPEED_PINCTRL_FUNC(VGAVS),
+ ASPEED_PINCTRL_FUNC(VPI24),
+ ASPEED_PINCTRL_FUNC(VPO),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g5_pinctrl_data = {
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 0e93cbf2ff33..08a10d4db229 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -260,6 +260,7 @@
#define SCUA0 0xA0 /* Multi-function Pin Control #7 */
#define SCUA4 0xA4 /* Multi-function Pin Control #8 */
#define SCUA8 0xA8 /* Multi-function Pin Control #9 */
+#define SCUAC 0xAC /* Multi-function Pin Control #10 */
#define HW_STRAP2 0xD0 /* Strapping */
/**
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v3 2/4] pinctrl: aspeed-g4: Add mux configuration for all pins
From: Andrew Jeffery @ 2016-12-06 3:11 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Joel Stanley,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Timothy Pearson
In-Reply-To: <20161206031152.3004-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
The patch introducing the g4 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms. Now, update the bindings document
to reflect the complete functionality and implement the necessary pin
configuration tables in the driver.
Cc: Timothy Pearson <tpearson-z0qzliK6Om0mgXJStvpl+vpXobYPEAuW@public.gmane.org>
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
Acked-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 19 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1097 +++++++++++++++++++-
2 files changed, 1096 insertions(+), 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 115b0cce6c1c..f5c427d11337 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -38,13 +38,18 @@ supported:
aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:
-ACPI BMCINT DDCCLK DDCDAT FLACK FLBUSY FLWP GPID0 GPIE0 GPIE2 GPIE4 GPIE6 I2C10
-I2C11 I2C12 I2C13 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCSMI MDIO1
-MDIO2 NCTS1 NCTS3 NCTS4 NDCD1 NDCD3 NDCD4 NDSR1 NDSR3 NDTR1 NDTR3 NRI1 NRI3
-NRI4 NRTS1 NRTS3 PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RMII1 ROM16
-ROM8 ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD3 RXD4 SD1 SGPMI SIOPBI SIOPBO TIMER3
-TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD3 TXD4 UART6 VGAHS VGAVS VPI18 VPI24 VPI30
-VPO12 VPO24
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
+GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
+I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
+MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
+NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0
+PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
+ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
+SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
+TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS
+VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index 558bd102416c..09b668415c56 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -43,9 +43,18 @@
* Not all pins have their signals defined (yet).
*/
+#define D6 0
+SSSF_PIN_DECL(D6, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+
+#define B5 1
+SSSF_PIN_DECL(B5, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
#define A4 2
SSSF_PIN_DECL(A4, GPIOA2, TIMER3, SIG_DESC_SET(SCU80, 2));
+#define E6 3
+SSSF_PIN_DECL(E6, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
+
#define I2C9_DESC SIG_DESC_SET(SCU90, 22)
#define C5 4
@@ -80,6 +89,26 @@ MS_PIN_DECL(D5, GPIOA7, MDIO2, TIMER8);
FUNC_GROUP_DECL(TIMER8, D5);
FUNC_GROUP_DECL(MDIO2, A3, D5);
+#define J21 8
+SSSF_PIN_DECL(J21, GPIOB0, SALT1, SIG_DESC_SET(SCU80, 8));
+
+#define J20 9
+SSSF_PIN_DECL(J20, GPIOB1, SALT2, SIG_DESC_SET(SCU80, 9));
+
+#define H18 10
+SSSF_PIN_DECL(H18, GPIOB2, SALT3, SIG_DESC_SET(SCU80, 10));
+
+#define F18 11
+SSSF_PIN_DECL(F18, GPIOB3, SALT4, SIG_DESC_SET(SCU80, 11));
+
+#define E19 12
+SIG_EXPR_DECL(LPCRST, LPCRST, SIG_DESC_SET(SCU80, 12));
+SIG_EXPR_DECL(LPCRST, LPCRSTS, SIG_DESC_SET(HW_STRAP1, 14));
+SIG_EXPR_LIST_DECL_DUAL(LPCRST, LPCRST, LPCRSTS);
+SS_PIN_DECL(E19, GPIOB4, LPCRST);
+
+FUNC_GROUP_DECL(LPCRST, E19);
+
#define H19 13
#define H19_DESC SIG_DESC_SET(SCU80, 13)
SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H19_DESC);
@@ -92,6 +121,19 @@ FUNC_GROUP_DECL(LPCSMI, H19);
#define H20 14
SSSF_PIN_DECL(H20, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+#define E18 15
+SIG_EXPR_LIST_DECL_SINGLE(EXTRST, EXTRST,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_BIT(SCU90, 31, 0),
+ SIG_DESC_SET(SCU3C, 3));
+SIG_EXPR_LIST_DECL_SINGLE(SPICS1, SPICS1,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_SET(SCU90, 31));
+MS_PIN_DECL(E18, GPIOB7, EXTRST, SPICS1);
+
+FUNC_GROUP_DECL(EXTRST, E18);
+FUNC_GROUP_DECL(SPICS1, E18);
+
#define SD1_DESC SIG_DESC_SET(SCU90, 0)
#define I2C10_DESC SIG_DESC_SET(SCU90, 23)
@@ -170,6 +212,62 @@ MS_PIN_DECL(D16, GPIOD1, SD2CMD, GPID0OUT);
FUNC_GROUP_DECL(GPID0, A18, D16);
+#define GPID2_DESC SIG_DESC_SET(SCU8C, 9)
+
+#define B17 26
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT0, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2IN, GPID2, GPID);
+MS_PIN_DECL(B17, GPIOD2, SD2DAT0, GPID2IN);
+
+#define A17 27
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT1, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2OUT, GPID2, GPID);
+MS_PIN_DECL(A17, GPIOD3, SD2DAT1, GPID2OUT);
+
+FUNC_GROUP_DECL(GPID2, B17, A17);
+
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define C16 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(C16, GPIOD4, SD2DAT2, GPID4IN);
+
+#define B16 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(B16, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, C16, B16);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define A16 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(A16, GPIOD6, SD2CD, GPID6IN);
+
+#define E15 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(E15, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, A16, E15);
+FUNC_GROUP_DECL(SD2, A18, D16, B17, A17, C16, B16, A16, E15);
+FUNC_GROUP_DECL(GPID, A18, D16, B17, A17, C16, B16, A16, E15);
+
#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
@@ -266,6 +364,15 @@ MS_PIN_DECL(B19, GPIOF1, NDCD4, SIOPBI);
FUNC_GROUP_DECL(NDCD4, B19);
FUNC_GROUP_DECL(SIOPBI, B19);
+#define A20 42
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, SIG_DESC_SET(SCUA4, 12));
+SIG_EXPR_DECL(SIOPWRGD, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+MS_PIN_DECL(A20, GPIOF2, NDSR4, SIOPWRGD);
+FUNC_GROUP_DECL(NDSR4, A20);
+FUNC_GROUP_DECL(SIOPWRGD, A20);
+
#define D17 43
SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
SIG_EXPR_DECL(SIOPBO, SIOPBO, SIG_DESC_SET(SCUA4, 14));
@@ -275,7 +382,17 @@ MS_PIN_DECL(D17, GPIOF3, NRI4, SIOPBO);
FUNC_GROUP_DECL(NRI4, D17);
FUNC_GROUP_DECL(SIOPBO, D17);
-FUNC_GROUP_DECL(ACPI, B19, D17);
+#define B18 44
+SSSF_PIN_DECL(B18, GPIOF4, NDTR4, SIG_DESC_SET(SCU80, 28));
+
+#define A19 45
+SIG_EXPR_LIST_DECL_SINGLE(NDTS4, NDTS4, SIG_DESC_SET(SCU80, 29));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, SIG_DESC_SET(SCUA4, 15));
+SIG_EXPR_DECL(SIOSCI, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+MS_PIN_DECL(A19, GPIOF5, NDTS4, SIOSCI);
+FUNC_GROUP_DECL(NDTS4, A19);
+FUNC_GROUP_DECL(SIOSCI, A19);
#define E16 46
SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
@@ -283,6 +400,34 @@ SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
#define C17 47
SSSF_PIN_DECL(C17, GPIOF7, RXD4, SIG_DESC_SET(SCU80, 31));
+#define A14 48
+SSSF_PIN_DECL(A14, GPIOG0, SGPSCK, SIG_DESC_SET(SCU84, 0));
+
+#define E13 49
+SSSF_PIN_DECL(E13, GPIOG1, SGPSLD, SIG_DESC_SET(SCU84, 1));
+
+#define D13 50
+SSSF_PIN_DECL(D13, GPIOG2, SGPSI0, SIG_DESC_SET(SCU84, 2));
+
+#define C13 51
+SSSF_PIN_DECL(C13, GPIOG3, SGPSI1, SIG_DESC_SET(SCU84, 3));
+
+#define B13 52
+SIG_EXPR_LIST_DECL_SINGLE(OSCCLK, OSCCLK, SIG_DESC_SET(SCU2C, 1));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(B13, GPIOG4, OSCCLK, WDTRST1);
+
+FUNC_GROUP_DECL(OSCCLK, B13);
+FUNC_GROUP_DECL(WDTRST1, B13);
+
+#define Y21 53
+SIG_EXPR_LIST_DECL_SINGLE(USBCKI, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(Y21, GPIOG5, USBCKI, WDTRST2);
+
+FUNC_GROUP_DECL(USBCKI, Y21);
+FUNC_GROUP_DECL(WDTRST2, Y21);
+
#define AA22 54
SSSF_PIN_DECL(AA22, GPIOG6, FLBUSY, SIG_DESC_SET(SCU84, 6));
@@ -352,6 +497,93 @@ MS_PIN_DECL(E7, GPIOH7, ROMD15, RXD6);
FUNC_GROUP_DECL(UART6, A8, C7, B7, A7, D7, B6, A6, E7);
+#define SPI1_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
+
+#define C22 64
+SIG_EXPR_DECL(SYSCS, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCS, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCS, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C22, GPIOI0, SYSCS);
+
+#define G18 65
+SIG_EXPR_DECL(SYSCK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCK, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(G18, GPIOI1, SYSCK);
+
+#define D19 66
+SIG_EXPR_DECL(SYSDO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDO, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(D19, GPIOI2, SYSDO);
+
+#define C20 67
+SIG_EXPR_DECL(SYSDI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDI, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C20, GPIOI3, SYSDI);
+
+#define VB_DESC SIG_DESC_SET(HW_STRAP1, 5)
+
+#define B22 68
+SIG_EXPR_DECL(SPI1CS0, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CS0, SIG_EXPR_PTR(SPI1CS0, SPI1),
+ SIG_EXPR_PTR(SPI1CS0, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CS0, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCS, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(B22, GPIOI4, SPI1CS0, VBCS);
+
+#define G19 69
+SIG_EXPR_DECL(SPI1CK, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CK, SIG_EXPR_PTR(SPI1CK, SPI1),
+ SIG_EXPR_PTR(SPI1CK, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CK, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCK, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(G19, GPIOI5, SPI1CK, VBCK);
+
+#define C18 70
+SIG_EXPR_DECL(SPI1DO, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DO, SIG_EXPR_PTR(SPI1DO, SPI1),
+ SIG_EXPR_PTR(SPI1DO, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DO, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDO, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(C18, GPIOI6, SPI1DO, VBDO);
+
+#define E20 71
+SIG_EXPR_DECL(SPI1DI, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DI, SIG_EXPR_PTR(SPI1DI, SPI1),
+ SIG_EXPR_PTR(SPI1DI, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DI, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDI, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(E20, GPIOI7, SPI1DI, VBDI);
+
+FUNC_GROUP_DECL(SPI1, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1DEBUG, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1PASSTHRU, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(VGABIOS_ROM, B22, G19, C18, E20);
+
+#define J5 72
+SSSF_PIN_DECL(J5, GPIOJ0, SGPMCK, SIG_DESC_SET(SCU84, 8));
+
+#define J4 73
+SSSF_PIN_DECL(J4, GPIOJ1, SGPMLD, SIG_DESC_SET(SCU84, 9));
+
+#define K5 74
+SSSF_PIN_DECL(K5, GPIOJ2, SGPMO, SIG_DESC_SET(SCU84, 10));
+
#define J3 75
SSSF_PIN_DECL(J3, GPIOJ3, SGPMI, SIG_DESC_SET(SCU84, 11));
@@ -496,6 +728,102 @@ SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, U5_DESC);
MS_PIN_DECL(U5, GPIOL7, VPIB1, RXD1);
FUNC_GROUP_DECL(RXD1, U5);
+#define V3 96
+#define V3_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_DECL(VPIOB2, VPI18, VPI18_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI24, VPI24_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI30, VPI30_DESC, V3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB2, SIG_EXPR_PTR(VPIOB2, VPI18),
+ SIG_EXPR_PTR(VPIOB2, VPI24),
+ SIG_EXPR_PTR(VPIOB2, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, V3_DESC);
+MS_PIN_DECL(V3, GPIOM0, VPIOB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, V3);
+
+#define W2 97
+#define W2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_DECL(VPIOB3, VPI18, VPI18_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI24, VPI24_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI30, VPI30_DESC, W2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB3, SIG_EXPR_PTR(VPIOB3, VPI18),
+ SIG_EXPR_PTR(VPIOB3, VPI24),
+ SIG_EXPR_PTR(VPIOB3, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, W2_DESC);
+MS_PIN_DECL(W2, GPIOM1, VPIOB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, W2);
+
+#define Y1 98
+#define Y1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_DECL(VPIOB4, VPI18, VPI18_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI24, VPI24_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI30, VPI30_DESC, Y1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB4, SIG_EXPR_PTR(VPIOB4, VPI18),
+ SIG_EXPR_PTR(VPIOB4, VPI24),
+ SIG_EXPR_PTR(VPIOB4, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, Y1_DESC);
+MS_PIN_DECL(Y1, GPIOM2, VPIOB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, Y1);
+
+#define V4 99
+#define V4_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_DECL(VPIOB5, VPI18, VPI18_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI24, VPI24_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI30, VPI30_DESC, V4_DESC);
+SIG_EXPR_LIST_DECL(VPIOB5, SIG_EXPR_PTR(VPIOB5, VPI18),
+ SIG_EXPR_PTR(VPIOB5, VPI24),
+ SIG_EXPR_PTR(VPIOB5, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, V4_DESC);
+MS_PIN_DECL(V4, GPIOM3, VPIOB5, NRI2);
+FUNC_GROUP_DECL(NRI2, V4);
+
+#define W3 100
+#define W3_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_DECL(VPIOB6, VPI18, VPI18_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI24, VPI24_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI30, VPI30_DESC, W3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB6, SIG_EXPR_PTR(VPIOB6, VPI18),
+ SIG_EXPR_PTR(VPIOB6, VPI24),
+ SIG_EXPR_PTR(VPIOB6, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, W3_DESC);
+MS_PIN_DECL(W3, GPIOM4, VPIOB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, W3);
+
+#define Y2 101
+#define Y2_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_DECL(VPIOB7, VPI18, VPI18_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI24, VPI24_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI30, VPI30_DESC, Y2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB7, SIG_EXPR_PTR(VPIOB7, VPI18),
+ SIG_EXPR_PTR(VPIOB7, VPI24),
+ SIG_EXPR_PTR(VPIOB7, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, Y2_DESC);
+MS_PIN_DECL(Y2, GPIOM5, VPIOB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, Y2);
+
+#define AA1 102
+#define AA1_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_DECL(VPIOB8, VPI18, VPI18_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI24, VPI24_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI30, VPI30_DESC, AA1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB8, SIG_EXPR_PTR(VPIOB8, VPI18),
+ SIG_EXPR_PTR(VPIOB8, VPI24),
+ SIG_EXPR_PTR(VPIOB8, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, AA1_DESC);
+MS_PIN_DECL(AA1, GPIOM6, VPIOB8, TXD2);
+FUNC_GROUP_DECL(TXD2, AA1);
+
+#define V5 103
+#define V5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_DECL(VPIOB9, VPI18, VPI18_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI24, VPI24_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI30, VPI30_DESC, V5_DESC);
+SIG_EXPR_LIST_DECL(VPIOB9, SIG_EXPR_PTR(VPIOB9, VPI18),
+ SIG_EXPR_PTR(VPIOB9, VPI24),
+ SIG_EXPR_PTR(VPIOB9, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, V5_DESC);
+MS_PIN_DECL(V5, GPIOM7, VPIOB9, RXD2);
+FUNC_GROUP_DECL(RXD2, V5);
+
#define W4 104
#define W4_DESC SIG_DESC_SET(SCU88, 0)
SIG_EXPR_LIST_DECL_SINGLE(VPIG0, VPI30, VPI30_DESC, W4_DESC);
@@ -580,10 +908,57 @@ SS_PIN_DECL(V6, GPIOO0, VPIG8);
SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9));
SS_PIN_DECL(Y5, GPIOO1, VPIG9);
-FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2);
-FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2, V6, Y5);
-FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, W4, Y3, AA22, W5, Y4, AA3,
- AB2);
+#define AA4 114
+SIG_EXPR_LIST_DECL_SINGLE(VPIR0, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(AA4, GPIOO2, VPIR0);
+
+#define AB3 115
+SIG_EXPR_LIST_DECL_SINGLE(VPIR1, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB3, GPIOO3, VPIR1);
+
+#define W6 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12));
+SS_PIN_DECL(W6, GPIOO4, VPIR2);
+
+#define AA5 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13));
+SS_PIN_DECL(AA5, GPIOO5, VPIR3);
+
+#define AB4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14));
+SS_PIN_DECL(AB4, GPIOO6, VPIR4);
+
+#define V7 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15));
+SS_PIN_DECL(V7, GPIOO7, VPIR5);
+
+#define Y6 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16));
+SS_PIN_DECL(Y6, GPIOP0, VPIR6);
+
+#define AB5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17));
+SS_PIN_DECL(AB5, GPIOP1, VPIR7);
+
+#define W7 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18));
+SS_PIN_DECL(W7, GPIOP2, VPIR8);
+
+#define AA6 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19));
+SS_PIN_DECL(AA6, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2);
+FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2, V6, Y5, W6, AA5, AB4, V7, Y6, AB5, W7,
+ AA6);
+FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, V3, W2, Y1, V4, W3, Y2, AA1,
+ V5, W4, Y3, AA22, W5, Y4, AA3, AB2, AA4, AB3);
+
+#define AB6 124
+SIG_EXPR_LIST_DECL_SINGLE(GPIOP4, GPIOP4);
+MS_PIN_DECL_(AB6, SIG_EXPR_LIST_PTR(GPIOP4));
#define Y7 125
SIG_EXPR_LIST_DECL_SINGLE(GPIOP5, GPIOP5);
@@ -619,6 +994,18 @@ SS_PIN_DECL(F5, GPIOQ3, SDA4);
FUNC_GROUP_DECL(I2C4, B1, F5);
+#define I2C14_DESC SIG_DESC_SET(SCU90, 27)
+
+#define H4 132
+SIG_EXPR_LIST_DECL_SINGLE(SCL14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H4, GPIOQ4, SCL14);
+
+#define H3 133
+SIG_EXPR_LIST_DECL_SINGLE(SDA14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H3, GPIOQ5, SDA14);
+
+FUNC_GROUP_DECL(I2C14, H4, H3);
+
#define DASH9028_DESC SIG_DESC_SET(SCU90, 28)
#define H2 134
@@ -776,13 +1163,6 @@ SIG_EXPR_LIST_DECL(ROMA23, SIG_EXPR_PTR(ROMA23, ROM8),
SIG_EXPR_LIST_DECL_SINGLE(VPOR5, VPO24, K18_DESC, VPO_24_OFF);
MS_PIN_DECL(K18, GPIOS7, ROMA23, VPOR5);
-FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
- U19);
-FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
- A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19);
-FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20);
-FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22);
-
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
#define A12 152
@@ -827,6 +1207,50 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1TXD3, RGMII1);
MS_PIN_DECL_(A13, SIG_EXPR_LIST_PTR(GPIOT5), SIG_EXPR_LIST_PTR(DASHA13),
SIG_EXPR_LIST_PTR(RGMII1TXD3));
+#define RMII2_DESC SIG_DESC_BIT(HW_STRAP1, 7, 0)
+
+#define D9 158
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT6, GPIOT6, SIG_DESC_SET(SCUA0, 6));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXEN, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCK, RGMII2);
+MS_PIN_DECL_(D9, SIG_EXPR_LIST_PTR(GPIOT6), SIG_EXPR_LIST_PTR(RMII2TXEN),
+ SIG_EXPR_LIST_PTR(RGMII2TXCK));
+
+#define E9 159
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT7, GPIOT7, SIG_DESC_SET(SCUA0, 7));
+SIG_EXPR_LIST_DECL_SINGLE(DASHE9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCTL, RGMII2);
+MS_PIN_DECL_(E9, SIG_EXPR_LIST_PTR(GPIOT7), SIG_EXPR_LIST_PTR(DASHE9),
+ SIG_EXPR_LIST_PTR(RGMII2TXCTL));
+
+#define A10 160
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU0, GPIOU0, SIG_DESC_SET(SCUA0, 8));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD0, RGMII2);
+MS_PIN_DECL_(A10, SIG_EXPR_LIST_PTR(GPIOU0), SIG_EXPR_LIST_PTR(RMII2TXD0),
+ SIG_EXPR_LIST_PTR(RGMII2TXD0));
+
+#define B10 161
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU1, GPIOU1, SIG_DESC_SET(SCUA0, 9));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD1, RGMII2);
+MS_PIN_DECL_(B10, SIG_EXPR_LIST_PTR(GPIOU1), SIG_EXPR_LIST_PTR(RMII2TXD1),
+ SIG_EXPR_LIST_PTR(RGMII2TXD1));
+
+#define C10 162
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU2, GPIOU2, SIG_DESC_SET(SCUA0, 10));
+SIG_EXPR_LIST_DECL_SINGLE(DASHC10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD2, RGMII2);
+MS_PIN_DECL_(C10, SIG_EXPR_LIST_PTR(GPIOU2), SIG_EXPR_LIST_PTR(DASHC10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD2));
+
+#define D10 163
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU3, GPIOU3, SIG_DESC_SET(SCUA0, 11));
+SIG_EXPR_LIST_DECL_SINGLE(DASHD10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD3, RGMII2);
+MS_PIN_DECL_(D10, SIG_EXPR_LIST_PTR(GPIOU3), SIG_EXPR_LIST_PTR(DASHD10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD3));
+
#define E11 164
SIG_EXPR_LIST_DECL_SINGLE(GPIOU4, GPIOU4, SIG_DESC_SET(SCUA0, 12));
SIG_EXPR_LIST_DECL_SINGLE(RMII1RCLK, RMII1, RMII1_DESC);
@@ -869,11 +1293,419 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1RXD3, RGMII1);
MS_PIN_DECL_(E10, SIG_EXPR_LIST_PTR(GPIOV1), SIG_EXPR_LIST_PTR(RMII1RXER),
SIG_EXPR_LIST_PTR(RGMII1RXD3));
+#define C9 170
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV2, GPIOV2, SIG_DESC_SET(SCUA0, 18));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RCLK, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCK, RGMII2);
+MS_PIN_DECL_(C9, SIG_EXPR_LIST_PTR(GPIOV2), SIG_EXPR_LIST_PTR(RMII2RCLK),
+ SIG_EXPR_LIST_PTR(RGMII2RXCK));
+
+#define B9 171
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV3, GPIOV3, SIG_DESC_SET(SCUA0, 19));
+SIG_EXPR_LIST_DECL_SINGLE(DASHB9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCTL, RGMII2);
+MS_PIN_DECL_(B9, SIG_EXPR_LIST_PTR(GPIOV3), SIG_EXPR_LIST_PTR(DASHB9),
+ SIG_EXPR_LIST_PTR(RGMII2RXCTL));
+
+#define A9 172
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV4, GPIOV4, SIG_DESC_SET(SCUA0, 20));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD0, RGMII2);
+MS_PIN_DECL_(A9, SIG_EXPR_LIST_PTR(GPIOV4), SIG_EXPR_LIST_PTR(RMII2RXD0),
+ SIG_EXPR_LIST_PTR(RGMII2RXD0));
+
+#define E8 173
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV5, GPIOV5, SIG_DESC_SET(SCUA0, 21));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD1, RGMII2);
+MS_PIN_DECL_(E8, SIG_EXPR_LIST_PTR(GPIOV5), SIG_EXPR_LIST_PTR(RMII2RXD1),
+ SIG_EXPR_LIST_PTR(RGMII2RXD1));
+
+#define D8 174
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV6, GPIOV6, SIG_DESC_SET(SCUA0, 22));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2CRSDV, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD2, RGMII2);
+MS_PIN_DECL_(D8, SIG_EXPR_LIST_PTR(GPIOV6), SIG_EXPR_LIST_PTR(RMII2CRSDV),
+ SIG_EXPR_LIST_PTR(RGMII2RXD2));
+
+#define C8 175
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV7, GPIOV7, SIG_DESC_SET(SCUA0, 23));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXER, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD3, RGMII2);
+MS_PIN_DECL_(C8, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
+ SIG_EXPR_LIST_PTR(RGMII2RXD3));
+
FUNC_GROUP_DECL(RMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
+FUNC_GROUP_DECL(RMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+FUNC_GROUP_DECL(RGMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+
+#define L5 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(L5, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, L5);
+
+#define L4 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(L4, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, L4);
+
+#define L3 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(L3, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, L3);
+
+#define L2 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(L2, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, L2);
+
+#define L1 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(L1, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, L1);
+
+#define M5 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(M5, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, M5);
+
+#define M4 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(M4, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, M4);
+
+#define M3 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(M3, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, M3);
+
+#define M2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(M2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, M2);
+
+#define M1 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(M1, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, M1);
+
+#define N5 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(N5, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, N5);
+
+#define N4 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(N4, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, N4);
+
+#define N3 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(N3, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, N3);
+
+#define N2 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(N2, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, N2);
+
+#define N1 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(N1, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, N1);
+
+#define P5 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(P5, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, P5);
+
+#define C21 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SS_PIN_DECL(C21, GPIOY0, SIOS3);
+FUNC_GROUP_DECL(SIOS3, C21);
+
+#define F20 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SS_PIN_DECL(F20, GPIOY1, SIOS5);
+FUNC_GROUP_DECL(SIOS5, F20);
+
+#define G20 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SS_PIN_DECL(G20, GPIOY2, SIOPWREQ);
+FUNC_GROUP_DECL(SIOPWREQ, G20);
+
+#define K20 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SS_PIN_DECL(K20, GPIOY3, SIOONCTRL);
+FUNC_GROUP_DECL(SIOONCTRL, K20);
+
+FUNC_GROUP_DECL(ACPI, B19, A20, D17, A19, C21, F20, G20, K20);
+
+#define R22 200
+#define R22_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(ROMA2, ROM8, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA2, ROM16, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA2, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB0, VPO12, R22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB0, VPO24, R22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB0, VPOOFF1, R22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB0, SIG_EXPR_PTR(VPOB0, VPO12),
+ SIG_EXPR_PTR(VPOB0, VPO24), SIG_EXPR_PTR(VPOB0, VPOOFF1));
+MS_PIN_DECL(R22, GPIOZ0, ROMA2, VPOB0);
+
+#define P18 201
+#define P18_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(ROMA3, ROM8, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA3, ROM16, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA3, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB1, VPO12, P18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB1, VPO24, P18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB1, VPOOFF1, P18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB1, SIG_EXPR_PTR(VPOB1, VPO12),
+ SIG_EXPR_PTR(VPOB1, VPO24), SIG_EXPR_PTR(VPOB1, VPOOFF1));
+MS_PIN_DECL(P18, GPIOZ1, ROMA3, VPOB1);
+
+#define P19 202
+#define P19_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(ROMA4, ROM8, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA4, ROM16, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA4, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB2, VPO12, P19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB2, VPO24, P19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, P19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO12),
+ SIG_EXPR_PTR(VPOB2, VPO24), SIG_EXPR_PTR(VPOB2, VPOOFF1));
+MS_PIN_DECL(P19, GPIOZ2, ROMA4, VPOB2);
+
+#define P20 203
+#define P20_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(ROMA5, ROM8, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA5, ROM16, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA5, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB3, VPO12, P20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB3, VPO24, P20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, P20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO12),
+ SIG_EXPR_PTR(VPOB3, VPO24), SIG_EXPR_PTR(VPOB3, VPOOFF1));
+MS_PIN_DECL(P20, GPIOZ3, ROMA5, VPOB3);
+
+#define P21 204
+#define P21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(ROMA6, ROM8, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA6, ROM16, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA6, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB4, VPO12, P21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB4, VPO24, P21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, P21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO12),
+ SIG_EXPR_PTR(VPOB4, VPO24), SIG_EXPR_PTR(VPOB4, VPOOFF1));
+MS_PIN_DECL(P21, GPIOZ4, ROMA6, VPOB4);
+
+#define P22 205
+#define P22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(ROMA7, ROM8, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA7, ROM16, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA7, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB5, VPO12, P22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB5, VPO24, P22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO12),
+ SIG_EXPR_PTR(VPOB5, VPO24), SIG_EXPR_PTR(VPOB5, VPOOFF1));
+MS_PIN_DECL(P22, GPIOZ5, ROMA7, VPOB5);
+
+#define M19 206
+#define M19_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(ROMA8, ROM8, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA8, ROM16, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA8, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB6, VPO12, M19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB6, VPO24, M19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, M19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO12),
+ SIG_EXPR_PTR(VPOB6, VPO24), SIG_EXPR_PTR(VPOB6, VPOOFF1));
+MS_PIN_DECL(M19, GPIOZ6, ROMA8, VPOB6);
+
+#define M20 207
+#define M20_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(ROMA9, ROM8, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA9, ROM16, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA9, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB7, VPO12, M20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB7, VPO24, M20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, M20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO12),
+ SIG_EXPR_PTR(VPOB7, VPO24), SIG_EXPR_PTR(VPOB7, VPOOFF1));
+MS_PIN_DECL(M20, GPIOZ7, ROMA9, VPOB7);
+
+#define M21 208
+#define M21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(ROMA10, ROM8, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA10, ROM16, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA10, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG0, VPO12, M21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG0, VPO24, M21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG0, VPOOFF1, M21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG0, SIG_EXPR_PTR(VPOG0, VPO12),
+ SIG_EXPR_PTR(VPOG0, VPO24), SIG_EXPR_PTR(VPOG0, VPOOFF1));
+MS_PIN_DECL(M21, GPIOAA0, ROMA10, VPOG0);
+
+#define M22 209
+#define M22_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(ROMA11, ROM8, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA11, ROM16, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA11, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG1, VPO12, M22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG1, VPO24, M22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG1, VPOOFF1, M22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG1, SIG_EXPR_PTR(VPOG1, VPO12),
+ SIG_EXPR_PTR(VPOG1, VPO24), SIG_EXPR_PTR(VPOG1, VPOOFF1));
+MS_PIN_DECL(M22, GPIOAA1, ROMA11, VPOG1);
+
+#define L18 210
+#define L18_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(ROMA12, ROM8, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA12, ROM16, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA12, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG2, VPO12, L18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG2, VPO24, L18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, L18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO12),
+ SIG_EXPR_PTR(VPOG2, VPO24), SIG_EXPR_PTR(VPOG2, VPOOFF1));
+MS_PIN_DECL(L18, GPIOAA2, ROMA12, VPOG2);
+
+#define L19 211
+#define L19_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(ROMA13, ROM8, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA13, ROM16, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA13, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG3, VPO12, L19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG3, VPO24, L19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, L19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO12),
+ SIG_EXPR_PTR(VPOG3, VPO24), SIG_EXPR_PTR(VPOG3, VPOOFF1));
+MS_PIN_DECL(L19, GPIOAA3, ROMA13, VPOG3);
+
+#define L20 212
+#define L20_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(ROMA14, ROM8, L20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA14, ROM16, L20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA14, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG4, VPO24, L20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, L20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG4, VPO24, VPOOFF1);
+MS_PIN_DECL(L20, GPIOAA4, ROMA14, VPOG4);
+
+#define L21 213
+#define L21_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(ROMA15, ROM8, L21_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA15, ROM16, L21_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA15, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG5, VPO24, L21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, L21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG5, VPO24, VPOOFF1);
+MS_PIN_DECL(L21, GPIOAA5, ROMA15, VPOG5);
+
+#define T18 214
+#define T18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(ROMA16, ROM8, T18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA16, ROM16, T18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA16, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG6, VPO24, T18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, T18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG6, VPO24, VPOOFF1);
+MS_PIN_DECL(T18, GPIOAA6, ROMA16, VPOG6);
+
+#define N18 215
+#define N18_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(ROMA17, ROM8, N18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA17, ROM16, N18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA17, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG7, VPO24, N18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, N18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG7, VPO24, VPOOFF1);
+MS_PIN_DECL(N18, GPIOAA7, ROMA17, VPOG7);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(ROMA18, ROM8, N19_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA18, ROM16, N19_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA18, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR0, VPO24, N19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR0, VPOOFF1, N19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR0, VPO24, VPOOFF1);
+MS_PIN_DECL(N19, GPIOAB0, ROMA18, VPOR0);
+
+#define M18 217
+#define M18_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(ROMA19, ROM8, M18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA19, ROM16, M18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA19, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR1, VPO24, M18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR1, VPOOFF1, M18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR1, VPO24, VPOOFF1);
+MS_PIN_DECL(M18, GPIOAB1, ROMA19, VPOR1);
+
+#define N22 218
+#define N22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(ROMA20, ROM8, N22_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA20, ROM16, N22_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA20, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR2, VPO24, N22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, N22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR2, VPO24, VPOOFF1);
+MS_PIN_DECL(N22, GPIOAB2, ROMA20, VPOR2);
+
+#define N20 219
+#define N20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(ROMA21, ROM8, N20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA21, ROM16, N20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA21, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR3, VPO24, N20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, N20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR3, VPO24, VPOOFF1);
+MS_PIN_DECL(N20, GPIOAB3, ROMA21, VPOR3);
+
+FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
+ U19, R22, P18, P19, P20, P21, P22, M19, M20, M21, M22, L18,
+ L19, L20, L21, T18, N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
+ A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19, L20, L21, T18,
+ N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20, R22, P18, P19, P20, P21, P22, M19,
+ M20, M21, M22, L18, L19, L20, L21, T18, N18, N19, M18, N22,
+ N20);
+FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19);
+
/* Note we account for GPIOY4-GPIOY7 even though they're not valid, thus 216
* pins becomes 220.
*/
@@ -883,84 +1715,180 @@ FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(A1),
+ ASPEED_PINCTRL_PIN(A10),
ASPEED_PINCTRL_PIN(A11),
ASPEED_PINCTRL_PIN(A12),
ASPEED_PINCTRL_PIN(A13),
+ ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A6),
ASPEED_PINCTRL_PIN(A7),
ASPEED_PINCTRL_PIN(A8),
+ ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
ASPEED_PINCTRL_PIN(AA2),
ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AA6),
ASPEED_PINCTRL_PIN(AA7),
ASPEED_PINCTRL_PIN(AB1),
ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
+ ASPEED_PINCTRL_PIN(AB6),
ASPEED_PINCTRL_PIN(AB7),
ASPEED_PINCTRL_PIN(B1),
+ ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
ASPEED_PINCTRL_PIN(B12),
+ ASPEED_PINCTRL_PIN(B13),
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
+ ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
+ ASPEED_PINCTRL_PIN(B5),
ASPEED_PINCTRL_PIN(B6),
ASPEED_PINCTRL_PIN(B7),
+ ASPEED_PINCTRL_PIN(B9),
ASPEED_PINCTRL_PIN(C1),
+ ASPEED_PINCTRL_PIN(C10),
ASPEED_PINCTRL_PIN(C11),
ASPEED_PINCTRL_PIN(C12),
+ ASPEED_PINCTRL_PIN(C13),
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
+ ASPEED_PINCTRL_PIN(C16),
ASPEED_PINCTRL_PIN(C17),
+ ASPEED_PINCTRL_PIN(C18),
ASPEED_PINCTRL_PIN(C2),
+ ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(C6),
ASPEED_PINCTRL_PIN(C7),
+ ASPEED_PINCTRL_PIN(C8),
+ ASPEED_PINCTRL_PIN(C9),
ASPEED_PINCTRL_PIN(D1),
+ ASPEED_PINCTRL_PIN(D10),
ASPEED_PINCTRL_PIN(D11),
ASPEED_PINCTRL_PIN(D12),
+ ASPEED_PINCTRL_PIN(D13),
ASPEED_PINCTRL_PIN(D14),
ASPEED_PINCTRL_PIN(D15),
ASPEED_PINCTRL_PIN(D16),
ASPEED_PINCTRL_PIN(D17),
ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D3),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
+ ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
+ ASPEED_PINCTRL_PIN(D8),
+ ASPEED_PINCTRL_PIN(D9),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E11),
ASPEED_PINCTRL_PIN(E12),
+ ASPEED_PINCTRL_PIN(E13),
ASPEED_PINCTRL_PIN(E14),
+ ASPEED_PINCTRL_PIN(E15),
ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E5),
+ ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
+ ASPEED_PINCTRL_PIN(E8),
+ ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F18),
+ ASPEED_PINCTRL_PIN(F20),
ASPEED_PINCTRL_PIN(F3),
ASPEED_PINCTRL_PIN(F4),
ASPEED_PINCTRL_PIN(F5),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G19),
+ ASPEED_PINCTRL_PIN(G20),
ASPEED_PINCTRL_PIN(G5),
ASPEED_PINCTRL_PIN(H1),
+ ASPEED_PINCTRL_PIN(H18),
ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H2),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(J21),
ASPEED_PINCTRL_PIN(J3),
+ ASPEED_PINCTRL_PIN(J4),
+ ASPEED_PINCTRL_PIN(J5),
ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K20),
+ ASPEED_PINCTRL_PIN(K5),
+ ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
+ ASPEED_PINCTRL_PIN(L2),
+ ASPEED_PINCTRL_PIN(L20),
+ ASPEED_PINCTRL_PIN(L21),
ASPEED_PINCTRL_PIN(L22),
+ ASPEED_PINCTRL_PIN(L3),
+ ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(L5),
+ ASPEED_PINCTRL_PIN(M1),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M2),
+ ASPEED_PINCTRL_PIN(M20),
+ ASPEED_PINCTRL_PIN(M21),
+ ASPEED_PINCTRL_PIN(M22),
+ ASPEED_PINCTRL_PIN(M3),
+ ASPEED_PINCTRL_PIN(M4),
+ ASPEED_PINCTRL_PIN(M5),
+ ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
+ ASPEED_PINCTRL_PIN(N2),
+ ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
+ ASPEED_PINCTRL_PIN(N22),
+ ASPEED_PINCTRL_PIN(N3),
+ ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R22),
ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T18),
ASPEED_PINCTRL_PIN(T19),
ASPEED_PINCTRL_PIN(T2),
ASPEED_PINCTRL_PIN(T4),
@@ -979,28 +1907,61 @@ static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(V20),
ASPEED_PINCTRL_PIN(V21),
ASPEED_PINCTRL_PIN(V22),
+ ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(V7),
ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W2),
ASPEED_PINCTRL_PIN(W21),
ASPEED_PINCTRL_PIN(W22),
+ ASPEED_PINCTRL_PIN(W3),
ASPEED_PINCTRL_PIN(W4),
ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(W7),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y21),
ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
ASPEED_PINCTRL_PIN(Y4),
ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
ASPEED_PINCTRL_PIN(Y7),
};
static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
ASPEED_PINCTRL_GROUP(BMCINT),
ASPEED_PINCTRL_GROUP(DDCCLK),
ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(EXTRST),
ASPEED_PINCTRL_GROUP(FLACK),
ASPEED_PINCTRL_GROUP(FLBUSY),
ASPEED_PINCTRL_GROUP(FLWP),
+ ASPEED_PINCTRL_GROUP(GPID),
ASPEED_PINCTRL_GROUP(GPID0),
+ ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
ASPEED_PINCTRL_GROUP(GPIE2),
ASPEED_PINCTRL_GROUP(GPIE4),
@@ -1009,6 +1970,7 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
ASPEED_PINCTRL_GROUP(I2C13),
+ ASPEED_PINCTRL_GROUP(I2C14),
ASPEED_PINCTRL_GROUP(I2C3),
ASPEED_PINCTRL_GROUP(I2C4),
ASPEED_PINCTRL_GROUP(I2C5),
@@ -1018,25 +1980,37 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C9),
ASPEED_PINCTRL_GROUP(LPCPD),
ASPEED_PINCTRL_GROUP(LPCPME),
- ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
ASPEED_PINCTRL_GROUP(NCTS3),
ASPEED_PINCTRL_GROUP(NCTS4),
ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
ASPEED_PINCTRL_GROUP(NDCD3),
ASPEED_PINCTRL_GROUP(NDCD4),
ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NDTS4),
ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
ASPEED_PINCTRL_GROUP(NRI3),
ASPEED_PINCTRL_GROUP(NRI4),
ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -1046,7 +2020,9 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(PWM6),
ASPEED_PINCTRL_GROUP(PWM7),
ASPEED_PINCTRL_GROUP(RGMII1),
+ ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
+ ASPEED_PINCTRL_GROUP(RMII2),
ASPEED_PINCTRL_GROUP(ROM16),
ASPEED_PINCTRL_GROUP(ROM8),
ASPEED_PINCTRL_GROUP(ROMCS1),
@@ -1054,21 +2030,48 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ROMCS3),
ASPEED_PINCTRL_GROUP(ROMCS4),
ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
ASPEED_PINCTRL_GROUP(RXD3),
ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SGPMCK),
ASPEED_PINCTRL_GROUP(SGPMI),
+ ASPEED_PINCTRL_GROUP(SGPMLD),
+ ASPEED_PINCTRL_GROUP(SGPMO),
+ ASPEED_PINCTRL_GROUP(SGPSCK),
+ ASPEED_PINCTRL_GROUP(SGPSI0),
+ ASPEED_PINCTRL_GROUP(SGPSI1),
+ ASPEED_PINCTRL_GROUP(SGPSLD),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
ASPEED_PINCTRL_GROUP(SIOPBI),
ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
+ ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1DEBUG),
+ ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPICS1),
ASPEED_PINCTRL_GROUP(TIMER3),
+ ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
ASPEED_PINCTRL_GROUP(TXD3),
ASPEED_PINCTRL_GROUP(TXD4),
ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
+ ASPEED_PINCTRL_GROUP(VGABIOS_ROM),
ASPEED_PINCTRL_GROUP(VGAHS),
ASPEED_PINCTRL_GROUP(VGAVS),
ASPEED_PINCTRL_GROUP(VPI18),
@@ -1076,17 +2079,40 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(VPI30),
ASPEED_PINCTRL_GROUP(VPO12),
ASPEED_PINCTRL_GROUP(VPO24),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
ASPEED_PINCTRL_FUNC(BMCINT),
ASPEED_PINCTRL_FUNC(DDCCLK),
ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(EXTRST),
ASPEED_PINCTRL_FUNC(FLACK),
ASPEED_PINCTRL_FUNC(FLBUSY),
ASPEED_PINCTRL_FUNC(FLWP),
+ ASPEED_PINCTRL_FUNC(GPID),
ASPEED_PINCTRL_FUNC(GPID0),
+ ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
ASPEED_PINCTRL_FUNC(GPIE2),
ASPEED_PINCTRL_FUNC(GPIE4),
@@ -1095,6 +2121,7 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
ASPEED_PINCTRL_FUNC(I2C13),
+ ASPEED_PINCTRL_FUNC(I2C14),
ASPEED_PINCTRL_FUNC(I2C3),
ASPEED_PINCTRL_FUNC(I2C4),
ASPEED_PINCTRL_FUNC(I2C5),
@@ -1104,24 +2131,37 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C9),
ASPEED_PINCTRL_FUNC(LPCPD),
ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
ASPEED_PINCTRL_FUNC(NCTS3),
ASPEED_PINCTRL_FUNC(NCTS4),
ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
ASPEED_PINCTRL_FUNC(NDCD3),
ASPEED_PINCTRL_FUNC(NDCD4),
ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NDTS4),
ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
ASPEED_PINCTRL_FUNC(NRI3),
ASPEED_PINCTRL_FUNC(NRI4),
ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -1131,7 +2171,9 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(PWM6),
ASPEED_PINCTRL_FUNC(PWM7),
ASPEED_PINCTRL_FUNC(RGMII1),
+ ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
+ ASPEED_PINCTRL_FUNC(RMII2),
ASPEED_PINCTRL_FUNC(ROM16),
ASPEED_PINCTRL_FUNC(ROM8),
ASPEED_PINCTRL_FUNC(ROMCS1),
@@ -1139,21 +2181,48 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ROMCS3),
ASPEED_PINCTRL_FUNC(ROMCS4),
ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
ASPEED_PINCTRL_FUNC(RXD3),
ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SGPMCK),
ASPEED_PINCTRL_FUNC(SGPMI),
+ ASPEED_PINCTRL_FUNC(SGPMLD),
+ ASPEED_PINCTRL_FUNC(SGPMO),
+ ASPEED_PINCTRL_FUNC(SGPSCK),
+ ASPEED_PINCTRL_FUNC(SGPSI0),
+ ASPEED_PINCTRL_FUNC(SGPSI1),
+ ASPEED_PINCTRL_FUNC(SGPSLD),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
ASPEED_PINCTRL_FUNC(SIOPBI),
ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
+ ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1DEBUG),
+ ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPICS1),
ASPEED_PINCTRL_FUNC(TIMER3),
+ ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
ASPEED_PINCTRL_FUNC(TXD3),
ASPEED_PINCTRL_FUNC(TXD4),
ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
+ ASPEED_PINCTRL_FUNC(VGABIOS_ROM),
ASPEED_PINCTRL_FUNC(VGAHS),
ASPEED_PINCTRL_FUNC(VGAVS),
ASPEED_PINCTRL_FUNC(VPI18),
@@ -1161,6 +2230,8 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(VPI30),
ASPEED_PINCTRL_FUNC(VPO12),
ASPEED_PINCTRL_FUNC(VPO24),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g4_pinctrl_data = {
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v3 1/4] pinctrl: aspeed: Read and write bits in LPC and GFX controllers
From: Andrew Jeffery @ 2016-12-06 3:11 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Joel Stanley,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161206031152.3004-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
The System Control Unit IP block in the Aspeed SoCs is typically where
the pinmux configuration is found, but not always. A number of pins
depend on state in one of LPC Host Control (LHC) or SoC Display
Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the
means to adjust these as necessary.
We use syscon to cast a regmap over the GFX and LPC blocks, which is
used as an arbitration layer between the relevant driver and the pinctrl
subsystem. The regmaps are then exposed to the SoC-specific pinctrl
drivers by phandles in the devicetree, and are selected during a mux
request by querying a new 'ip' member in struct aspeed_sig_desc.
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
---
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 50 ++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 18 +--
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 48 ++++--
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 161 +++++++++++++--------
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 32 ++--
5 files changed, 214 insertions(+), 95 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 2ad18c4ea55c..115b0cce6c1c 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -4,12 +4,19 @@ Aspeed Pin Controllers
The Aspeed SoCs vary in functionality inside a generation but have a common mux
device register layout.
-Required properties:
-- compatible : Should be any one of the following:
- "aspeed,ast2400-pinctrl"
- "aspeed,g4-pinctrl"
- "aspeed,ast2500-pinctrl"
- "aspeed,g5-pinctrl"
+Required properties for g4:
+- compatible : Should be any one of the following:
+ "aspeed,ast2400-pinctrl"
+ "aspeed,g4-pinctrl"
+
+Required properties for g5:
+- compatible : Should be any one of the following:
+ "aspeed,ast2500-pinctrl"
+ "aspeed,g5-pinctrl"
+
+- aspeed,external-nodes: A cell of phandles to external controller nodes:
+ 0: compatible with "aspeed,ast2500-gfx", "syscon"
+ 1: compatible with "aspeed,ast2500-lpchc", "syscon"
The pin controller node should be a child of a syscon node with the required
property:
@@ -47,7 +54,7 @@ RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
TIMER7 TIMER8 VGABIOSROM
-Examples:
+g4 Example:
syscon: scu@1e6e2000 {
compatible = "syscon", "simple-mfd";
@@ -63,5 +70,34 @@ syscon: scu@1e6e2000 {
};
};
+g5 Example:
+
+apb {
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ };
+
+ lpchc: lpchc@1e7890a0 {
+ compatible = "aspeed,ast2500-lpchc", "syscon";
+ reg = <0x1e7890a0 0xc4>;
+ };
+
+ syscon: scu@1e6e2000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g5-pinctrl";
+ aspeed,external-nodes = <&gfx, &lpchc>;
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+ };
+ };
+};
+
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices.
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index a21b071ff290..558bd102416c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -292,7 +292,7 @@ SSSF_PIN_DECL(U18, GPIOG7, FLWP, SIG_DESC_SET(SCU84, 7));
#define UART6_DESC SIG_DESC_SET(SCU90, 7)
#define ROM16_DESC SIG_DESC_SET(SCU90, 6)
#define FLASH_WIDE SIG_DESC_SET(HW_STRAP1, 4)
-#define BOOT_SRC_NOR { HW_STRAP1, GENMASK(1, 0), 0, 0 }
+#define BOOT_SRC_NOR { ASPEED_IP_SCU, HW_STRAP1, GENMASK(1, 0), 0, 0 }
#define A8 56
SIG_EXPR_DECL(ROMD8, ROM16, ROM16_DESC);
@@ -418,9 +418,9 @@ FUNC_GROUP_DECL(I2C8, G5, F3);
#define U1 88
SSSF_PIN_DECL(U1, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
-#define VPI18_DESC { SCU90, GENMASK(5, 4), 1, 0 }
-#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
-#define VPI30_DESC { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPI18_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
+#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
+#define VPI30_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
#define T5 89
#define T5_DESC SIG_DESC_SET(SCU84, 17)
@@ -641,11 +641,11 @@ SSSF_PIN_DECL(Y22, GPIOR2, ROMCS3, SIG_DESC_SET(SCU88, 26));
#define U19 139
SSSF_PIN_DECL(U19, GPIOR3, ROMCS4, SIG_DESC_SET(SCU88, 27));
-#define VPOOFF0_DESC { SCU94, GENMASK(1, 0), 0, 0 }
-#define VPO12_DESC { SCU94, GENMASK(1, 0), 1, 0 }
-#define VPO24_DESC { SCU94, GENMASK(1, 0), 2, 0 }
-#define VPOOFF1_DESC { SCU94, GENMASK(1, 0), 3, 0 }
-#define VPO_OFF_12 { SCU94, 0x2, 0, 0 }
+#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define VPO12_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
+#define VPO24_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
+#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
+#define VPO_OFF_12 { ASPEED_IP_SCU, SCU94, 0x2, 0, 0 }
#define VPO_24_OFF SIG_DESC_SET(SCU94, 1)
#define V21 140
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 87b46390b695..c5c9a1b6fa1c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -26,8 +27,8 @@
#define ASPEED_G5_NR_PINS 228
-#define COND1 { SCU90, BIT(6), 0, 0 }
-#define COND2 { SCU94, GENMASK(1, 0), 0, 0 }
+#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
+#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
#define B14 0
SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
@@ -186,9 +187,12 @@ MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
FUNC_GROUP_DECL(GPIE0, B20, C20);
-#define SPI1_DESC { HW_STRAP1, GENMASK(13, 12), 1, 0 }
-#define SPI1DEBUG_DESC { HW_STRAP1, GENMASK(13, 12), 2, 0 }
-#define SPI1PASSTHRU_DESC { HW_STRAP1, GENMASK(13, 12), 3, 0 }
+#define SPI1_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
#define C18 64
SIG_EXPR_DECL(SYSCS, SPI1DEBUG, COND1, SPI1DEBUG_DESC);
@@ -325,10 +329,11 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
FUNC_GROUP_DECL(I2C8, P2, R1);
-#define VPIOFF0_DESC { SCU90, GENMASK(5, 4), 0, 0 }
-#define VPIOFF1_DESC { SCU90, GENMASK(5, 4), 1, 0 }
-#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
-#define VPIRSVD_DESC { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
+#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
+#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
+#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
+
#define V2 104
#define V2_DESC SIG_DESC_SET(SCU88, 0)
@@ -848,10 +853,35 @@ static struct pinctrl_desc aspeed_g5_pinctrl_desc = {
static int aspeed_g5_pinctrl_probe(struct platform_device *pdev)
{
int i;
+ struct regmap *map;
+ struct device_node *node;
for (i = 0; i < ARRAY_SIZE(aspeed_g5_pins); i++)
aspeed_g5_pins[i].number = i;
+ node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 0);
+ map = syscon_node_to_regmap(node);
+ of_node_put(node);
+ if (IS_ERR(map)) {
+ dev_warn(&pdev->dev, "No GFX phandle found, some mux configurations may fail\n");
+ map = NULL;
+ }
+ aspeed_g5_pinctrl_data.maps[ASPEED_IP_GFX] = map;
+
+ node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 1);
+ if (node) {
+ map = syscon_node_to_regmap(node->parent);
+ if (IS_ERR(map)) {
+ dev_warn(&pdev->dev, "LHC parent is not a syscon, some mux configurations may fail\n");
+ map = NULL;
+ }
+ } else {
+ dev_warn(&pdev->dev, "No LHC phandle found, some mux configurations may fail\n");
+ map = NULL;
+ }
+ of_node_put(node);
+ aspeed_g5_pinctrl_data.maps[ASPEED_IP_LPC] = map;
+
return aspeed_pinctrl_probe(pdev, &aspeed_g5_pinctrl_desc,
&aspeed_g5_pinctrl_data);
}
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 49aeba912531..782c5c97f853 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -14,6 +14,12 @@
#include "../core.h"
#include "pinctrl-aspeed.h"
+static const char *const aspeed_pinmux_ips[] = {
+ [ASPEED_IP_SCU] = "SCU",
+ [ASPEED_IP_GFX] = "GFX",
+ [ASPEED_IP_LPC] = "LPC",
+};
+
int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -78,7 +84,8 @@ int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
static inline void aspeed_sig_desc_print_val(
const struct aspeed_sig_desc *desc, bool enable, u32 rv)
{
- pr_debug("SCU%x[0x%08x]=0x%x, got 0x%x from 0x%08x\n", desc->reg,
+ pr_debug("Want %s%X[0x%08X]=0x%X, got 0x%X from 0x%08X\n",
+ aspeed_pinmux_ips[desc->ip], desc->reg,
desc->mask, enable ? desc->enable : desc->disable,
(rv & desc->mask) >> __ffs(desc->mask), rv);
}
@@ -88,10 +95,11 @@ static inline void aspeed_sig_desc_print_val(
*
* @desc: The signal descriptor of interest
* @enabled: True to query the enabled state, false to query disabled state
- * @regmap: The SCU regmap instance
+ * @regmap: The IP block's regmap instance
*
- * @return True if the descriptor's bitfield is configured to the state
- * selected by @enabled, false otherwise
+ * @return 1 if the descriptor's bitfield is configured to the state
+ * selected by @enabled, 0 if not, and less than zero if an unrecoverable
+ * failure occurred
*
* Evaluation of descriptor state is non-trivial in that it is not a binary
* outcome: The bitfields can be greater than one bit in size and thus can take
@@ -99,14 +107,19 @@ static inline void aspeed_sig_desc_print_val(
* descriptor (typically this means a different function to the one of interest
* is enabled). Thus we must explicitly test for either condition as required.
*/
-static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
+static int aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
bool enabled, struct regmap *map)
{
+ int ret;
unsigned int raw;
u32 want;
- if (regmap_read(map, desc->reg, &raw) < 0)
- return false;
+ if (!map)
+ return -ENODEV;
+
+ ret = regmap_read(map, desc->reg, &raw);
+ if (ret)
+ return ret;
aspeed_sig_desc_print_val(desc, enabled, raw);
want = enabled ? desc->enable : desc->disable;
@@ -119,10 +132,10 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
*
* @expr: An expression controlling the signal for a mux function on a pin
* @enabled: True to query the enabled state, false to query disabled state
- * @regmap: The SCU regmap instance
+ * @maps: The list of regmap instances
*
- * @return True if the expression composed by @enabled evaluates true, false
- * otherwise
+ * @return 1 if the expression composed by @enabled evaluates true, 0 if not,
+ * and less than zero if an unrecoverable failure occurred.
*
* A mux function is enabled or disabled if the function's signal expression
* for each pin in the function's pin group evaluates true for the desired
@@ -135,19 +148,21 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
* neither the enabled nor disabled state. Thus we must explicitly test for
* either condition as required.
*/
-static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
- bool enabled, struct regmap *map)
+static int aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
+ bool enabled, struct regmap * const *maps)
{
int i;
+ int ret;
for (i = 0; i < expr->ndescs; i++) {
const struct aspeed_sig_desc *desc = &expr->descs[i];
- if (!aspeed_sig_desc_eval(desc, enabled, map))
- return false;
+ ret = aspeed_sig_desc_eval(desc, enabled, maps[desc->ip]);
+ if (ret <= 0)
+ return ret;
}
- return true;
+ return 1;
}
/**
@@ -158,19 +173,24 @@ static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
* configured
* @enable: true to enable an function's signal through a pin's signal
* expression, false to disable the function's signal
- * @map: The SCU's regmap instance for pinmux register access.
+ * @maps: The list of regmap instances for pinmux register access.
*
- * @return true if the expression is configured as requested, false otherwise
+ * @return 0 if the expression is configured as requested and a negative error
+ * code otherwise
*/
-static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
- bool enable, struct regmap *map)
+static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
+ bool enable, struct regmap * const *maps)
{
+ int ret;
int i;
for (i = 0; i < expr->ndescs; i++) {
- bool ret;
const struct aspeed_sig_desc *desc = &expr->descs[i];
u32 pattern = enable ? desc->enable : desc->disable;
+ u32 val = (pattern << __ffs(desc->mask));
+
+ if (!maps[desc->ip])
+ return -ENODEV;
/*
* Strap registers are configured in hardware or by early-boot
@@ -179,64 +199,79 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
* deconfigured and is the reason we re-evaluate after writing
* all descriptor bits.
*/
- if (desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2)
+ if ((desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2) &&
+ desc->ip == ASPEED_IP_SCU)
continue;
- ret = regmap_update_bits(map, desc->reg, desc->mask,
- pattern << __ffs(desc->mask)) == 0;
+ ret = regmap_update_bits(maps[desc->ip], desc->reg,
+ desc->mask, val);
- if (!ret)
+ if (ret)
return ret;
}
- return aspeed_sig_expr_eval(expr, enable, map);
+ ret = aspeed_sig_expr_eval(expr, enable, maps);
+ if (ret < 0)
+ return ret;
+
+ if (!ret)
+ return -EPERM;
+
+ return 0;
}
-static bool aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
- struct regmap *map)
+static int aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
+ struct regmap * const *maps)
{
- if (aspeed_sig_expr_eval(expr, true, map))
- return true;
+ int ret;
+
+ ret = aspeed_sig_expr_eval(expr, true, maps);
+ if (ret < 0)
+ return ret;
- return aspeed_sig_expr_set(expr, true, map);
+ if (!ret)
+ return aspeed_sig_expr_set(expr, true, maps);
+
+ return 0;
}
-static bool aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
- struct regmap *map)
+static int aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
+ struct regmap * const *maps)
{
- if (!aspeed_sig_expr_eval(expr, true, map))
- return true;
+ int ret;
+
+ ret = aspeed_sig_expr_eval(expr, true, maps);
+ if (ret < 0)
+ return ret;
+
+ if (ret)
+ return aspeed_sig_expr_set(expr, false, maps);
- return aspeed_sig_expr_set(expr, false, map);
+ return 0;
}
/**
* Disable a signal on a pin by disabling all provided signal expressions.
*
* @exprs: The list of signal expressions (from a priority level on a pin)
- * @map: The SCU's regmap instance for pinmux register access.
+ * @maps: The list of regmap instances for pinmux register access.
*
- * @return true if all expressions in the list are successfully disabled, false
- * otherwise
+ * @return 0 if all expressions are disabled, otherwise a negative error code
*/
-static bool aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
- struct regmap *map)
+static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
+ struct regmap * const *maps)
{
- bool disabled = true;
+ int ret = 0;
if (!exprs)
return true;
- while (*exprs) {
- bool ret;
-
- ret = aspeed_sig_expr_disable(*exprs, map);
- disabled = disabled && ret;
-
+ while (*exprs && !ret) {
+ ret = aspeed_sig_expr_disable(*exprs, maps);
exprs++;
}
- return disabled;
+ return ret;
}
/**
@@ -330,6 +365,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
unsigned int group)
{
int i;
+ int ret;
const struct aspeed_pinctrl_data *pdata =
pinctrl_dev_get_drvdata(pctldev);
const struct aspeed_pin_group *pgroup = &pdata->groups[group];
@@ -343,6 +379,8 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
const struct aspeed_sig_expr **funcs;
const struct aspeed_sig_expr ***prios;
+ pr_debug("Muxing pin %d for %s\n", pin, pfunc->name);
+
if (!pdesc)
return -EINVAL;
@@ -358,8 +396,9 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
if (expr)
break;
- if (!aspeed_disable_sig(funcs, pdata->map))
- return -EPERM;
+ ret = aspeed_disable_sig(funcs, pdata->maps);
+ if (ret)
+ return ret;
prios++;
}
@@ -377,8 +416,9 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
return -ENXIO;
}
- if (!aspeed_sig_expr_enable(expr, pdata->map))
- return -EPERM;
+ ret = aspeed_sig_expr_enable(expr, pdata->maps);
+ if (ret)
+ return ret;
}
return 0;
@@ -414,6 +454,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
+ int ret;
const struct aspeed_pinctrl_data *pdata =
pinctrl_dev_get_drvdata(pctldev);
const struct aspeed_pin_desc *pdesc = pdata->pins[offset].drv_data;
@@ -432,8 +473,9 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
if (aspeed_gpio_in_exprs(funcs))
break;
- if (!aspeed_disable_sig(funcs, pdata->map))
- return -EPERM;
+ ret = aspeed_disable_sig(funcs, pdata->maps);
+ if (ret)
+ return ret;
prios++;
}
@@ -462,10 +504,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
* If GPIO is not the lowest priority signal type, assume there is only
* one expression defined to enable the GPIO function
*/
- if (!aspeed_sig_expr_enable(expr, pdata->map))
- return -EPERM;
-
- return 0;
+ return aspeed_sig_expr_enable(expr, pdata->maps);
}
int aspeed_pinctrl_probe(struct platform_device *pdev,
@@ -481,10 +520,10 @@ int aspeed_pinctrl_probe(struct platform_device *pdev,
return -ENODEV;
}
- pdata->map = syscon_node_to_regmap(parent->of_node);
- if (IS_ERR(pdata->map)) {
+ pdata->maps[ASPEED_IP_SCU] = syscon_node_to_regmap(parent->of_node);
+ if (IS_ERR(pdata->maps[ASPEED_IP_SCU])) {
dev_err(&pdev->dev, "No regmap for syscon pincontroller parent\n");
- return PTR_ERR(pdata->map);
+ return PTR_ERR(pdata->maps[ASPEED_IP_SCU]);
}
pctl = pinctrl_register(pdesc, &pdev->dev, pdata);
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 3e72ef8c54bf..0e93cbf2ff33 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -232,6 +232,11 @@
* group.
*/
+#define ASPEED_IP_SCU 0
+#define ASPEED_IP_GFX 1
+#define ASPEED_IP_LPC 2
+#define ASPEED_NR_PINMUX_IPS 3
+
/*
* The "Multi-function Pins Mapping and Control" table in the SoC datasheet
* references registers by the device/offset mnemonic. The register macros
@@ -261,7 +266,9 @@
* A signal descriptor, which describes the register, bits and the
* enable/disable values that should be compared or written.
*
- * @reg: The register offset from base in bytes
+ * @ip: The IP block identifier, used as an index into the regmap array in
+ * struct aspeed_pinctrl_data
+ * @reg: The register offset with respect to the base address of the IP block
* @mask: The mask to apply to the register. The lowest set bit of the mask is
* used to derive the shift value.
* @enable: The value that enables the function. Value should be in the LSBs,
@@ -270,6 +277,7 @@
* LSBs, not at the position of the mask.
*/
struct aspeed_sig_desc {
+ unsigned int ip;
unsigned int reg;
u32 mask;
u32 enable;
@@ -313,24 +321,30 @@ struct aspeed_pin_desc {
/* Macro hell */
+#define SIG_DESC_IP_BIT(ip, reg, idx, val) \
+ { ip, reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
+
/**
- * Short-hand macro for describing a configuration enabled by the state of one
- * bit. The disable value is derived.
+ * Short-hand macro for describing an SCU descriptor enabled by the state of
+ * one bit. The disable value is derived.
*
* @reg: The signal's associated register, offset from base
* @idx: The signal's bit index in the register
* @val: The value (0 or 1) that enables the function
*/
#define SIG_DESC_BIT(reg, idx, val) \
- { reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
+ SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, val)
+
+#define SIG_DESC_IP_SET(ip, reg, idx) SIG_DESC_IP_BIT(ip, reg, idx, 1)
/**
- * A further short-hand macro describing a configuration enabled with a set bit.
+ * A further short-hand macro expanding to an SCU descriptor enabled by a set
+ * bit.
*
- * @reg: The configuration's associated register, offset from base
- * @idx: The configuration's bit index in the register
+ * @reg: The register, offset from base
+ * @idx: The bit index in the register
*/
-#define SIG_DESC_SET(reg, idx) SIG_DESC_BIT(reg, idx, 1)
+#define SIG_DESC_SET(reg, idx) SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, 1)
#define SIG_DESC_LIST_SYM(sig, func) sig_descs_ ## sig ## _ ## func
#define SIG_DESC_LIST_DECL(sig, func, ...) \
@@ -500,7 +514,7 @@ struct aspeed_pin_desc {
MS_PIN_DECL_(pin, SIG_EXPR_LIST_PTR(gpio))
struct aspeed_pinctrl_data {
- struct regmap *map;
+ struct regmap *maps[ASPEED_NR_PINMUX_IPS];
const struct pinctrl_pin_desc *pins;
const unsigned int npins;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v3 0/4] pinctrl: aspeed: Implement remaining pins
From: Andrew Jeffery @ 2016-12-06 3:11 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, linux-gpio, devicetree, linux-kernel
Hi all,
This is v3 of the series implementing the remainder of the pinmux tables for
the AST2400 and AST2500 SoCs. v2 of the series can be found here:
https://lkml.org/lkml/2016/11/2/263
Cheers,
Andrew
Significant changes since v2:
* The fix for touching bit SCU90[6] has been applied, so the patch has been
dropped.
* The MFD devicetree bindings patches have been split out into their own
series: https://lkml.org/lkml/2016/12/5/835
* Rework the "Read and write bits in LPC and GFX controllers" patch so that the
changes are backwards compatible with existing devicetrees. This will lead to
limited functionality, but no more limited than what systems with those
devicetrees already experience.
* A fix for the kerneldoc return value descriptions
Significant changes since v1:
* Fixes from v1 have been applied, so have been dropped for v2
* A new fix has appeared, "pinctrl-aspeed-g5: Never set SCU90[6]", as noted
above
* New bindings documents for the SoC Display and LPC Host Controllers, driven
by the patch "pinctrl: aspeed: Read and write bits in LPCHC and GFX
controllers"
* The v1 patch "pinctrl: aspeed: Enable capture of off-SCU pinmux state" has
been significantly reworked and is now titled "pinctrl: aspeed: Read and
write bits in LPCHC and GFX controllers"
Andrew Jeffery (4):
pinctrl: aspeed: Read and write bits in LPC and GFX controllers
pinctrl: aspeed-g4: Add mux configuration for all pins
pinctrl: aspeed-g5: Add mux configuration for all pins
pinctrl: aspeed: Fix kerneldoc return descriptions
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 86 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1115 +++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 1524 +++++++++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 165 ++-
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 33 +-
5 files changed, 2799 insertions(+), 124 deletions(-)
--
2.9.3
^ permalink raw reply
* Re: [PATCH v3 2/2] mtd: spi-nor: add rockchip serial flash controller driver
From: Marek Vasut @ 2016-12-06 3:08 UTC (permalink / raw)
To: Shawn Lin, David Woodhouse, Brian Norris
Cc: Cyrille Pitchen, Rob Herring, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Heiko Stuebner
In-Reply-To: <8cac8489-3fd1-bfc3-9a25-a3fbda74e03e-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
On 12/06/2016 03:56 AM, Shawn Lin wrote:
[...]
>>> +static inline void rockchip_sfc_setup_transfer(struct spi_nor *nor,
>>> + loff_t from_to,
>>> + size_t len, u8 op_type)
>>> +{
>>> + struct rockchip_sfc_chip_priv *priv = nor->priv;
>>> + struct rockchip_sfc *sfc = priv->sfc;
>>> + u32 reg;
>>> + u8 if_type = 0;
>>> +
>>> + if_type = get_if_type(sfc, nor->flash_read);
>>> + writel_relaxed((if_type << SFC_CTRL_DATA_BITS_SHIFT) |
>>> + (if_type << SFC_CTRL_ADDR_BITS_SHIFT) |
>>> + (if_type << SFC_CTRL_CMD_BITS_SHIFT) |
>>
>> Hm, looking at this, does the controller only support n-n-n mode (1-1-1,
>> 2-2-2, 4-4-4) ? Or why don't you allow 1-1-n/1-n-n/2-n-n ?
>
> No, it also could support 1-1-n, etc.
> By looking at the cadence-quadspi.c, it only allows
> CQSPI_INST_TYPE_SINGLE for f_pdata->addr_width and f_pdata->inst_width,
> so finally it only supports 1-1-1, 1-1-2, 1-1-4?
>
>> I would like to hear some input from Cyrille on this one.
The CQSPI driver indeed does only 1-1-x read thus far.
I am not sure whether support for the other modes in the SPI NOR
subsystem landed already, which is why I'd like to hear from
Cyrille here.
[...]
>>> +#ifdef CONFIG_PM
>>> +int rockchip_sfc_runtime_suspend(struct device *dev)
>>> +{
>>> + struct rockchip_sfc *sfc = dev_get_drvdata(dev);
>>> +
>>> + clk_disable_unprepare(sfc->hclk);
>>> + return 0;
>>> +}
>>
>> Was the suspend ever really tested with this block ? Is disabling clock
>> really enough ?
>
> It was tested and we could do more, for instance power off the genpd,
> but disabling clcok should be enough.
What about putting the controller into some reset state , is that possible?
>>> +int rockchip_sfc_runtime_resume(struct device *dev)
>>> +{
>>> + struct rockchip_sfc *sfc = dev_get_drvdata(dev);
>>> +
>>> + clk_prepare_enable(sfc->hclk);
>>> + return 0;
>>> +}
>>> +#endif /* CONFIG_PM */
>>
>> [...]
>>
>
>
--
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v3 2/2] mtd: spi-nor: add rockchip serial flash controller driver
From: Shawn Lin @ 2016-12-06 2:56 UTC (permalink / raw)
To: Marek Vasut, David Woodhouse, Brian Norris
Cc: shawn.lin-TNX95d0MmH7DzftRWevZcw, Cyrille Pitchen, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Heiko Stuebner
In-Reply-To: <852b11c2-daf3-75dc-a5c6-576109a974a9-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On 2016/12/5 11:40, Marek Vasut wrote:
> On 12/05/2016 03:56 AM, Shawn Lin wrote:
>> Add rockchip serial flash controller driver
>>
>> Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>>
>
> Looks good, a few nits below.
>
> [...]
>
>> +static int get_if_type(struct rockchip_sfc *sfc, enum read_mode flash_read)
>> +{
>> + enum rockchip_sfc_iftype if_type;
>
> Wouldn't it be shorter if you used if-return below ?
> Example
>
> if (flash_read == SPI_NOR_QUAD)
> return IF_TYPE_QUAD;
>
> if (flash_read == SPI_NOR_DUAL)
> return IF_TYPE_DUAL;
> ...
ok, will improve.
>
> dev_err(sfc->dev, "unsupported SPI read mode\n");
> return -EINVAL;
>
>> + switch (flash_read) {
>> + case SPI_NOR_DUAL:
>> + if_type = IF_TYPE_DUAL;
>> + break;
>> + case SPI_NOR_QUAD:
>> + if_type = IF_TYPE_QUAD;
>> + break;
>> + case SPI_NOR_NORMAL:
>> + case SPI_NOR_FAST:
>> + if_type = IF_TYPE_STD;
>> + break;
>> + default:
>> + dev_err(sfc->dev, "unsupported SPI read mode\n");
>> + return -EINVAL;
>> + }
>> +
>> + return if_type;
>> +}
>
> [...]
>
>> +static inline void rockchip_sfc_setup_transfer(struct spi_nor *nor,
>> + loff_t from_to,
>> + size_t len, u8 op_type)
>> +{
>> + struct rockchip_sfc_chip_priv *priv = nor->priv;
>> + struct rockchip_sfc *sfc = priv->sfc;
>> + u32 reg;
>> + u8 if_type = 0;
>> +
>> + if_type = get_if_type(sfc, nor->flash_read);
>> + writel_relaxed((if_type << SFC_CTRL_DATA_BITS_SHIFT) |
>> + (if_type << SFC_CTRL_ADDR_BITS_SHIFT) |
>> + (if_type << SFC_CTRL_CMD_BITS_SHIFT) |
>
> Hm, looking at this, does the controller only support n-n-n mode (1-1-1,
> 2-2-2, 4-4-4) ? Or why don't you allow 1-1-n/1-n-n/2-n-n ?
No, it also could support 1-1-n, etc.
By looking at the cadence-quadspi.c, it only allows
CQSPI_INST_TYPE_SINGLE for f_pdata->addr_width and f_pdata->inst_width,
so finally it only supports 1-1-1, 1-1-2, 1-1-4?
> I would like to hear some input from Cyrille on this one.
>
>> + (sfc->negative_edge ? SFC_CTRL_PHASE_SEL_NEGETIVE : 0),
>> + sfc->regbase + SFC_CTRL);
>> +
>> + if (op_type == SFC_CMD_DIR_WR)
>> + reg = nor->program_opcode << SFC_CMD_IDX_SHIFT;
>> + else
>> + reg = nor->read_opcode << SFC_CMD_IDX_SHIFT;
>> +
>> + reg |= op_type << SFC_CMD_DIR_SHIFT;
>> + reg |= (nor->addr_width == 4) ?
>> + SFC_CMD_ADDR_32BITS : SFC_CMD_ADDR_24BITS;
>> +
>> + reg |= priv->cs << SFC_CMD_CS_SHIFT;
>> + reg |= len << SFC_CMD_TRAN_BYTES_SHIFT;
>> +
>> + if (op_type == SFC_CMD_DIR_RD)
>> + reg |= SFC_CMD_DUMMY(nor->read_dummy);
>> +
>> + /* Should minus one as 0x0 means 1 bit flash address */
>> + writel_relaxed(nor->addr_width * 8 - 1, sfc->regbase + SFC_ABIT);
>> + writel_relaxed(reg, sfc->regbase + SFC_CMD);
>> + writel_relaxed(from_to, sfc->regbase + SFC_ADDR);
>> +}
>
>
> [...]
>
>> +static int rockchip_sfc_dma_transfer(struct spi_nor *nor, loff_t from_to,
>> + size_t len, u_char *buf, u8 op_type)
>> +{
>> + struct rockchip_sfc_chip_priv *priv = nor->priv;
>> + struct rockchip_sfc *sfc = priv->sfc;
>> + size_t offset;
>> + int ret;
>> + dma_addr_t dma_addr = 0;
>
> Nit, you can precalculate the DMA_TO/FROM_DEVICE and store it to
> variable here, ie.
>
> dma_dir = (op_type == SFC_CMD_DIR_RD) ? DMA_FROM_DEVICE : DMA_TO_DEVICE.
>
>> + for (offset = 0; offset < len; offset += SFC_DMA_MAX_LEN) {
>> + size_t trans = min_t(size_t, SFC_DMA_MAX_LEN, len - offset);
>> +
>> + if (SFC_CMD_DIR_RD)
>
> if (op_type == is missing, but you can drop this, see above.
okay
>
>> + dma_addr = dma_map_single(NULL, (void *)buf,
>> + trans, DMA_FROM_DEVICE);
>> + else
>> + dma_addr = dma_map_single(NULL, (void *)buf,
>> + trans, DMA_TO_DEVICE);
>
> You can use dma_dir here ^ and drop the condition.
sure
>
>> + if (dma_mapping_error(sfc->dev, dma_addr)) {
>> + /*
>> + * If we use pre-allocated dma_buffer, we need to
>> + * do a copy here.
>> + */
>> + if (op_type == SFC_CMD_DIR_WR)
>> + memcpy(sfc->buffer, buf + offset, trans);
>> +
>> + dma_addr = 0;
>> + }
>> +
>> + if (op_type == SFC_CMD_DIR_WR)
>> + /*
>> + * Flush the write data from write_buf to dma_addr
>> + * if using dynamic allocated dma buffer before dma
>> + * moves data from dma_addr to fifo.
>> + */
>> + dma_sync_single_for_device(sfc->dev, dma_addr,
>> + trans, DMA_TO_DEVICE);
>> +
>> +
>> + /* If failing to map dma, use pre-allocated area instead */
>> + ret = rockchip_sfc_do_dma_transfer(nor, from_to + offset,
>> + dma_addr ? dma_addr :
>> + sfc->dma_buffer,
>> + trans, op_type);
>> +
>> + if (dma_addr) {
>> + /*
>> + * Invalidate the read data from dma_addr if using
>> + * dynamic allocated dma buffer after dma moves data
>> + * from fifo to dma_addr.
>> + */
>> + if (op_type == SFC_CMD_DIR_RD) {
>> + dma_sync_single_for_cpu(sfc->dev, dma_addr,
>> + trans, DMA_FROM_DEVICE);
>> + dma_unmap_single(NULL, dma_addr,
>> + trans, DMA_FROM_DEVICE);
>> + } else {
>> + dma_unmap_single(NULL, dma_addr,
>> + trans, DMA_TO_DEVICE);
>
> Here as well and it'd be reduced to
>
> if (...)
> dma_sync_single...()
> dma_unmap( ... , dma_dir);
sure.
>
>> + }
>> + }
>> +
>> + if (ret) {
>> + dev_warn(nor->dev, "DMA read timeout\n");
>> + return ret;
>> + }
>> + /*
>> + * If we use pre-allocated dma_buffer for read, we need to
>> + * do a copy here.
>> + */
>> + if (!dma_addr && (op_type == SFC_CMD_DIR_RD))
>> + memcpy(buf + offset, sfc->buffer, trans);
>> + }
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t rockchip_sfc_do_rd_wr(struct spi_nor *nor, loff_t from_to,
>> + size_t len, u_char *buf, u32 op_type)
>> +{
>> + struct rockchip_sfc_chip_priv *priv = nor->priv;
>> + struct rockchip_sfc *sfc = priv->sfc;
>> + int ret;
>> +
>> + if (!sfc->use_dma)
>> + goto no_dma;
>> +
>> + return rockchip_sfc_dma_transfer(nor, from_to, len,
>> + buf, op_type);
>
> if (likely(sfc->use_dma))
> return rockchip_sfc_dma...();
>
> /* Comment saying that we fall back to PIO */
> ... pio code ...
>
sure.
>> +no_dma:
>> + ret = rockchip_sfc_pio_transfer(nor, from_to, len,
>> + (u_char *)buf, op_type);
>> + if (ret) {
>> + if (op_type == SFC_CMD_DIR_RD)
>> + dev_warn(nor->dev, "PIO read timeout\n");
>> + else
>> + dev_warn(nor->dev, "PIO write timeout\n");
>> + return ret;
>> + }
>> +
>> + return len;
>> +}
>
> [...]
>
>> +/**
>
> Drop this asterisk unless you document the driver in kerneldoc.
okay
>
>> + * Get spi flash device information and register it as a mtd device.
>> + */
>> +static int rockchip_sfc_register(struct device_node *np,
>> + struct rockchip_sfc *sfc)
>> +{
>> + struct device *dev = sfc->dev;
>> + struct mtd_info *mtd;
>> + struct spi_nor *nor;
>> + int ret;
>> +
>> + nor = &(sfc->flash[sfc->num_chip].nor);
>
> Parenthesis not needed.
sure.
>
>> + nor->dev = dev;
>> + spi_nor_set_flash_node(nor, np);
>> +
>> + ret = of_property_read_u8(np, "reg", &sfc->flash[sfc->num_chip].cs);
>> + if (ret) {
>> + dev_err(dev, "No reg property for %s\n",
>> + np->full_name);
>> + return ret;
>> + }
>> +
>> + ret = of_property_read_u32(np, "spi-max-frequency",
>> + &sfc->flash[sfc->num_chip].clk_rate);
>> + if (ret) {
>> + dev_err(dev, "No spi-max-frequency property for %s\n",
>> + np->full_name);
>> + return ret;
>> + }
>> +
>> + sfc->flash[sfc->num_chip].sfc = sfc;
>> + nor->priv = &(sfc->flash[sfc->num_chip]);
>> +
>> + nor->prepare = rockchip_sfc_prep;
>> + nor->unprepare = rockchip_sfc_unprep;
>> + nor->read_reg = rockchip_sfc_read_reg;
>> + nor->write_reg = rockchip_sfc_write_reg;
>> + nor->read = rockchip_sfc_read;
>> + nor->write = rockchip_sfc_write;
>> + nor->erase = NULL;
>> + ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
>> + if (ret)
>> + return ret;
>> +
>> + mtd = &(nor->mtd);
>> + mtd->name = np->name;
>> + ret = mtd_device_register(mtd, NULL, 0);
>> + if (ret)
>> + return ret;
>> +
>> + sfc->num_chip++;
>> + return 0;
>> +}
>> +
>> +static void rockchip_sfc_unregister_all(struct rockchip_sfc *sfc)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < sfc->num_chip; i++)
>> + mtd_device_unregister(&(sfc->flash[i].nor.mtd));
>
> Inner parenthesis not needed IMO
okay.
>
>> +}
>> +
>> +static int rockchip_sfc_register_all(struct rockchip_sfc *sfc)
>> +{
>> + struct device *dev = sfc->dev;
>> + struct device_node *np;
>> + int ret;
>> +
>> + for_each_available_child_of_node(dev->of_node, np) {
>> + ret = rockchip_sfc_register(np, sfc);
>> + if (ret)
>> + goto fail;
>> +
>> + if (sfc->num_chip == SFC_MAX_CHIPSELECT_NUM) {
>> + dev_warn(dev, "Exceeds the max cs limitation\n");
>> + break;
>> + }
>> + }
>> +
>> + return 0;
>> +
>> +fail:
>> + dev_err(dev, "Failed to register all chips\n");
>> + /* Unregister all the _registered_ nor flash */
>> + rockchip_sfc_unregister_all(sfc);
>> + return ret;
>> +}
>
>
> [...]
>
>> +#ifdef CONFIG_PM
>> +int rockchip_sfc_runtime_suspend(struct device *dev)
>> +{
>> + struct rockchip_sfc *sfc = dev_get_drvdata(dev);
>> +
>> + clk_disable_unprepare(sfc->hclk);
>> + return 0;
>> +}
>
> Was the suspend ever really tested with this block ? Is disabling clock
> really enough ?
It was tested and we could do more, for instance power off the genpd,
but disabling clcok should be enough.
>
>> +int rockchip_sfc_runtime_resume(struct device *dev)
>> +{
>> + struct rockchip_sfc *sfc = dev_get_drvdata(dev);
>> +
>> + clk_prepare_enable(sfc->hclk);
>> + return 0;
>> +}
>> +#endif /* CONFIG_PM */
>
> [...]
>
--
Best Regards
Shawn Lin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v3 6/6] mfd: dt: Move syscon bindings to syscon subdirectory
From: Andrew Jeffery @ 2016-12-06 2:53 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206025321.1792-1-andrew@aj.id.au>
The use of syscons is growing, lets collate them in their own part of
the bindings tree.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Documentation/devicetree/bindings/mfd/{ => syscon}/aspeed-scu.txt | 0
Documentation/devicetree/bindings/mfd/{ => syscon}/atmel-gpbr.txt | 0
Documentation/devicetree/bindings/mfd/{ => syscon}/atmel-matrix.txt | 0
Documentation/devicetree/bindings/mfd/{ => syscon}/atmel-smc.txt | 0
Documentation/devicetree/bindings/mfd/{ => syscon}/qcom,tcsr.txt | 0
Documentation/devicetree/bindings/mfd/{ => syscon}/syscon.txt | 0
.../devicetree/bindings/mfd/{ => syscon}/ti-keystone-devctrl.txt | 0
7 files changed, 0 insertions(+), 0 deletions(-)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/aspeed-scu.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/atmel-gpbr.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/atmel-matrix.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/atmel-smc.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/qcom,tcsr.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/syscon.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/ti-keystone-devctrl.txt (100%)
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/syscon/aspeed-scu.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mfd/aspeed-scu.txt
rename to Documentation/devicetree/bindings/mfd/syscon/aspeed-scu.txt
diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/syscon/atmel-gpbr.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
rename to Documentation/devicetree/bindings/mfd/syscon/atmel-gpbr.txt
diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/syscon/atmel-matrix.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mfd/atmel-matrix.txt
rename to Documentation/devicetree/bindings/mfd/syscon/atmel-matrix.txt
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/syscon/atmel-smc.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mfd/atmel-smc.txt
rename to Documentation/devicetree/bindings/mfd/syscon/atmel-smc.txt
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt b/Documentation/devicetree/bindings/mfd/syscon/qcom,tcsr.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
rename to Documentation/devicetree/bindings/mfd/syscon/qcom,tcsr.txt
diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon/syscon.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mfd/syscon.txt
rename to Documentation/devicetree/bindings/mfd/syscon/syscon.txt
diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/syscon/ti-keystone-devctrl.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
rename to Documentation/devicetree/bindings/mfd/syscon/ti-keystone-devctrl.txt
--
2.9.3
^ permalink raw reply
* [PATCH v3 5/6] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
From: Andrew Jeffery @ 2016-12-06 2:53 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206025321.1792-1-andrew@aj.id.au>
The Aspeed SoC Display Controller is presented as a syscon device to
arbitrate access by display and pinmux drivers. Video pinmux
configuration on fifth generation SoCs depends on bits in both the
System Control Unit and the Display Controller.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/mfd/syscon/aspeed-gfx.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/syscon/aspeed-gfx.txt
diff --git a/Documentation/devicetree/bindings/mfd/syscon/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/syscon/aspeed-gfx.txt
new file mode 100644
index 000000000000..aea5370efd97
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/syscon/aspeed-gfx.txt
@@ -0,0 +1,17 @@
+* Device tree bindings for Aspeed SoC Display Controller (GFX)
+
+The Aspeed SoC Display Controller primarily does as its name suggests, but also
+participates in pinmux requests on the g5 SoCs. It is therefore considered a
+syscon device.
+
+Required properties:
+- compatible: "aspeed,ast2500-gfx", "syscon"
+- reg: contains offset/length value of the GFX memory
+ region.
+
+Example:
+
+gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v3 4/6] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LHC)
From: Andrew Jeffery @ 2016-12-06 2:53 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206025321.1792-1-andrew@aj.id.au>
The LPC bus pinmux configuration on fifth generation Aspeed SoCs depends
on bits in both the System Control Unit and the LPC Host Controller.
The Aspeed LPC Host Controller is described as a child node of the
LPC host-range syscon device for arbitration of access by the host
controller and pinmux drivers.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
.../devicetree/bindings/mfd/aspeed-lpc.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
index a97131aba446..9de318ef72da 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -109,3 +109,25 @@ lpc: lpc@1e789000 {
};
};
+Host Node Children
+==================
+
+LPC Host Controller
+-------------------
+
+The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
+between the host and the baseboard management controller. The registers exist
+in the "host" portion of the Aspeed LPC controller, which must be the parent of
+the LPC host controller node.
+
+Required properties:
+- compatible: "aspeed,ast2500-lhc";
+- reg: contains offset/length value of the LHC memory
+ region.
+
+Example:
+
+lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v3 3/6] mfd: dt: Add Aspeed Low Pin Count Controller bindings
From: Andrew Jeffery @ 2016-12-06 2:53 UTC (permalink / raw)
To: Lee Jones
Cc: Mark Rutland, devicetree, Corey Minyard, Andrew Jeffery,
Linus Walleij, linux-kernel, Rob Herring, Cédric Le Goater,
linux-arm-kernel, Joel Stanley
In-Reply-To: <20161206025321.1792-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
.../devicetree/bindings/mfd/aspeed-lpc.txt | 111 +++++++++++++++++++++
1 file changed, 111 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
new file mode 100644
index 000000000000..a97131aba446
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -0,0 +1,111 @@
+======================================================================
+Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller
+======================================================================
+
+The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
+peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
+primary use case of the Aspeed LPC controller is as a slave on the bus
+(typically in a Baseboard Management Controller SoC), but under certain
+conditions it can also take the role of bus master.
+
+The LPC controller is represented as a multi-function device to account for the
+mix of functionality it provides. The principle split is between the register
+layout at the start of the I/O space which is, to quote the Aspeed datasheet,
+"basically compatible with the [LPC registers from the] popular BMC controller
+H8S/2168[1]", and everything else, where everything else is an eclectic
+collection of functions with a esoteric register layout. "Everything else",
+here labeled the "host" portion of the controller, includes, but is not limited
+to:
+
+* An IPMI Block Transfer[2] Controller
+
+* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the
+ physical properties of some LPC pins, configuration of serial IRQs, and
+ APB-to-LPC bridging amonst other functions.
+
+* An LPC Host Interface Controller: Manages functions exposed to the host such
+ as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
+ management and bus snoop configuration.
+
+* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom
+ hardware management protocols for handover between the host and baseboard
+ management controller.
+
+Additionally the state of the LPC controller influences the pinmux
+configuration, therefore the host portion of the controller is exposed as a
+syscon as a means to arbitrate access.
+
+[0] http://www.intel.com/design/chipsets/industry/25128901.pdf
+[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4
+[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
+[3] https://en.wikipedia.org/wiki/Super_I/O
+
+Required properties
+===================
+
+- compatible: One of:
+ "aspeed,ast2400-lpc", "simple-mfd"
+ "aspeed,ast2500-lpc", "simple-mfd"
+
+- reg: contains the physical address and length values of the Aspeed
+ LPC memory region.
+
+- #address-cells: <1>
+- #size-cells: <1>
+- ranges: Maps 0 to the physical address and length of the LPC memory
+ region
+
+Required LPC Child nodes
+========================
+
+BMC Node
+--------
+
+- compatible: One of:
+ "aspeed,ast2400-lpc-bmc"
+ "aspeed,ast2500-lpc-bmc"
+
+- reg: contains the physical address and length values of the
+ H8S/2168-compatible LPC controller memory region
+
+Host Node
+---------
+
+- compatible: One of:
+ "aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
+ "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
+
+- reg: contains the address and length values of the host-related
+ register space for the Aspeed LPC controller
+
+- #address-cells: <1>
+- #size-cells: <1>
+- ranges: Maps 0 to the address and length of the host-related LPC memory
+ region
+
+Example:
+
+lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2500-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e789000 0x1000>;
+
+ lpc_bmc: lpc-bmc@0 {
+ compatible = "aspeed,ast2500-lpc-bmc";
+ reg = <0x0 0x80>;
+ };
+
+ lpc_host: lpc-host@80 {
+ compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
+ reg-io-width = <4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80 0x1e0>;
+ };
+};
+
--
2.9.3
^ permalink raw reply related
* [PATCH v3 2/6] mfd: dt: ranges, #address-cells and #size-cells as optional properties
From: Andrew Jeffery @ 2016-12-06 2:53 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206025321.1792-1-andrew@aj.id.au>
Whilst describing a device and not a bus, simple-mfd is modelled on
simple-bus where child nodes are iterated and registered as platform
devices. Some complex devices, e.g. the Aspeed LPC controller, can
benefit from address space mapping such that child nodes can use the
regs property to describe their resources within the multi-function
device.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Documentation/devicetree/bindings/mfd/mfd.txt | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
index f1fceeda12f1..bcb6abb9d413 100644
--- a/Documentation/devicetree/bindings/mfd/mfd.txt
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -25,6 +25,16 @@ Optional properties:
be used. In the latter case the child devices will be determined by the
operating system.
+- ranges: Describes the address mapping relationship to the parent. Should set
+ the child's base address to 0, the physical address within parent's address
+ space, and the length of the address map.
+
+- #address-cells: Specifies the number of cells used to represent physical base
+ addresses. Must be present if ranges is used.
+
+- #size-cells: Specifies the number of cells used to represent the size of an
+ address. Must be present if ranges is used.
+
Example:
foo@1000 {
--
2.9.3
^ permalink raw reply related
* [PATCH v3 1/6] mfd: dt: Fix "indicates" typo in mfd bindings document
From: Andrew Jeffery @ 2016-12-06 2:53 UTC (permalink / raw)
To: Lee Jones
Cc: Mark Rutland, devicetree, Corey Minyard, Andrew Jeffery,
Linus Walleij, linux-kernel, Rob Herring, Cédric Le Goater,
linux-arm-kernel, Joel Stanley
In-Reply-To: <20161206025321.1792-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Documentation/devicetree/bindings/mfd/mfd.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
index af9d6931a1a2..f1fceeda12f1 100644
--- a/Documentation/devicetree/bindings/mfd/mfd.txt
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -19,7 +19,7 @@ Optional properties:
- compatible : "simple-mfd" - this signifies that the operating system should
consider all subnodes of the MFD device as separate devices akin to how
- "simple-bus" inidicates when to see subnodes as children for a simple
+ "simple-bus" indicates when to see subnodes as children for a simple
memory-mapped bus. For more complex devices, when the nexus driver has to
probe registers to figure out what child devices exist etc, this should not
be used. In the latter case the child devices will be determined by the
--
2.9.3
^ permalink raw reply related
* [PATCH v3 0/6] mfd: dt: Add bindings for the Aspeed MFDs
From: Andrew Jeffery @ 2016-12-06 2:53 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Hi Lee,
Here's a series describing the bindings for some MFDs in the Aspeed SoCs. I
expect there will be discussion about how I've gone about this with adding a
ranges property to the MFD bindings: The motivation here is to allow re-use of
the standard regs property to describe resources used inside the MFD. This is
partly driven by wanting to avoid modifying the existing IPMI Block Transfer
bindings which were written prior to sorting out how we were going to represent
the Aspeed LPC controller, but also because the register layout for sub-devices
of the LPC controller is quite esoteric. Further, the pinmux state depends on
bits in the Low Pin Count (LPC) bus controller, which is the motivation for
exposing a part of the LPC space as a syscon.
These issues were described in the comments of a small RFC patch, and the
implementation provided here is an extension of those thoughts:
https://lkml.org/lkml/2016/11/17/24
Some of the patches in this MFD series has been split from the v2 of Aspeed
pinmux patches posted below:
https://lkml.org/lkml/2016/11/2/263
and to address your comments on relevant patches in the v2 above I've created a
syscon directory under mfd. The Aspeed SoC Display Controller is the first
bindings document to live there (and is otherwise unchanged), and a subsequent
patch moves all documents whose compatible contains "syscon" but not
"simple-mfd".
Andrew Jeffery (6):
mfd: dt: Fix "indicates" typo in mfd bindings document
mfd: dt: ranges, #address-cells and #size-cells as optional properties
mfd: dt: Add Aspeed Low Pin Count Controller bindings
mfd: dt: Add bindings for the Aspeed LPC Host Controller (LHC)
mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
mfd: dt: Move syscon bindings to syscon subdirectory
.../devicetree/bindings/mfd/aspeed-lpc.txt | 133 +++++++++++++++++++++
Documentation/devicetree/bindings/mfd/mfd.txt | 12 +-
.../devicetree/bindings/mfd/syscon/aspeed-gfx.txt | 17 +++
.../bindings/mfd/{ => syscon}/aspeed-scu.txt | 0
.../bindings/mfd/{ => syscon}/atmel-gpbr.txt | 0
.../bindings/mfd/{ => syscon}/atmel-matrix.txt | 0
.../bindings/mfd/{ => syscon}/atmel-smc.txt | 0
.../bindings/mfd/{ => syscon}/qcom,tcsr.txt | 0
.../bindings/mfd/{ => syscon}/syscon.txt | 0
.../mfd/{ => syscon}/ti-keystone-devctrl.txt | 0
10 files changed, 161 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
create mode 100644 Documentation/devicetree/bindings/mfd/syscon/aspeed-gfx.txt
rename Documentation/devicetree/bindings/mfd/{ => syscon}/aspeed-scu.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/atmel-gpbr.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/atmel-matrix.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/atmel-smc.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/qcom,tcsr.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/syscon.txt (100%)
rename Documentation/devicetree/bindings/mfd/{ => syscon}/ti-keystone-devctrl.txt (100%)
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v3 1/2] mtd: spi-nor: Bindings for Rockchip serial flash controller
From: Shawn Lin @ 2016-12-06 2:34 UTC (permalink / raw)
To: Marek Vasut, David Woodhouse, Brian Norris
Cc: shawn.lin-TNX95d0MmH7DzftRWevZcw, Cyrille Pitchen, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Heiko Stuebner
In-Reply-To: <40cb2739-f58d-2e35-5b87-6b46e93e422e-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On 2016/12/5 11:24, Marek Vasut wrote:
> On 12/05/2016 03:56 AM, Shawn Lin wrote:
>> Add binding document for the Rockchip serial flash controller.
>>
>> Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>>
>> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> ---
>>
>> Changes in v3:
>> - rename sfc-no-dma to sfc-no-DMA
>>
>> Changes in v2: None
>>
>> .../devicetree/bindings/mtd/rockchip-sfc.txt | 31 ++++++++++++++++++++++
>> 1 file changed, 31 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mtd/rockchip-sfc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt
>> new file mode 100644
>> index 0000000..c6b4f58
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/rockchip-sfc.txt
>> @@ -0,0 +1,31 @@
>> +Rockchip Serial Flash Controller
>> +
>> +Required properties:
>> +- compatible : Should be
>> + "rockchip,rk1108-sfc", "rockchip,sfc" for ROCKCHIP RK1108.
>> +- address-cells : Should be 1.
>> +- size-cells : Should be 0.
>> +- clocks: Must contain two entries for each entry in clock-names.
>> +- clock-names: Shall be "sfc" for the transfer-clock, and "hsfc" for
>> + the peripheral clock.
>> +- interrupts : Should contain the interrupt for the device.
>> +- reg: Physical base address of the controller and length of memory mapped.
>> +
>> +Optional properties:
>
> Uhhh, I apologize for the miscommunication.
>
>> +- rockchip,sfc-no-DMA: Indicate the controller doesn't support dma transfer.
> I didn't mean this ^^^ DMA, that should be lowercase. I meant ^^^
> this one. The property should be lowercase, the description
> should be uppercase.
Ah, got it.
>
>> +
>> +Example:
>> +nor_flash: sfc@301c0000 {
>> + compatible = "rockchip,rk1108-sfc", "rockchip,sfc";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
>> + clock-names = "sfc", "hsfc";
>> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x301c0000 0x1000>;
>> + spi-nor@0 {
>> + compatible = "jedec,spi-nor";
>> + spi-max-frequency = <12000000>;
>> + reg = <0>;
>> + };
>> +};
>>
>
>
--
Best Regards
Shawn Lin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v3 -next 1/2] ARM: sunxi: add support for H2+ SoC
From: Alexey Kardashevskiy @ 2016-12-06 2:01 UTC (permalink / raw)
To: Maxime Ripard, Icenowy Zheng
Cc: devicetree, Vishnu Patekar, Arnd Bergmann, linux-doc,
Andre Przywara, linux-sunxi, Russell King, linux-kernel,
Hans de Goede, Chen-Yu Tsai, Rob Herring, linux-arm-kernel
In-Reply-To: <20161205091955.zkffyktw5trfocnx@lukather>
[-- Attachment #1.1.1: Type: text/plain, Size: 504 bytes --]
On 05/12/16 20:19, Maxime Ripard wrote:
> On Fri, Dec 02, 2016 at 11:05:12PM +0800, Icenowy Zheng wrote:
>> Allwinner H2+ is a quad-core Cortex-A7 SoC.
>>
>> It is very like H3, that they share the same SoC ID (0x1680), and H3
>> memory maps as well as drivers works well on the SoC.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>
> Fixed the alphabetical order in the bindings doc, and applied.
Where is that resulting tree, with these ones and EMAC? Thanks.
--
Alexey
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 839 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH v3 -next 2/2] ARM: dts: sunxi: add support for Orange Pi Zero board
From: Alexey Kardashevskiy @ 2016-12-06 1:51 UTC (permalink / raw)
To: Icenowy Zheng, Maxime Ripard, Chen-Yu Tsai, Rob Herring,
Russell King, Andre Przywara, Hans de Goede, Arnd Bergmann,
Vishnu Patekar
Cc: devicetree, linux-sunxi, linux-kernel, linux-arm-kernel,
linux-doc
In-Reply-To: <20161202150513.34691-2-icenowy@aosc.xyz>
On 03/12/16 02:05, Icenowy Zheng wrote:
> Orange Pi Zero is a board that came with the new Allwinner H2+ SoC and a
> SDIO Wi-Fi chip by Allwinner (XR819).
>
> Add a device tree file for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
> Changes since v2:
> - Merged SDIO Wi-Fi patch into it.
> - SDIO Wi-Fi: add a ethernet1 alias to it, as it has no internal NVRAM.
> - SDIO Wi-Fi: changed pinctrl binding to generic pinconf
> - removed all gpio pinctrl nodes
> - changed h2plus to h2-plus
> Changes since v1:
> - Convert to generic pinconf bindings.
> - SDIO Wi-Fi: add patch.
>
> Some notes:
> - The uart1 and uart2 is available on the unsoldered gpio header.
> - The onboard USB connector has its Vbus directly connected to DCIN-5V (the
> power jack)
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 159 ++++++++++++++++++++++
> 2 files changed, 160 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6447abc..59f6e86 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -844,6 +844,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> sun8i-a33-sinlinx-sina33.dtb \
> sun8i-a83t-allwinner-h8homlet-v2.dtb \
> sun8i-a83t-cubietruck-plus.dtb \
> + sun8i-h2-plus-orangepi-zero.dtb \
> sun8i-h3-bananapi-m2-plus.dtb \
> sun8i-h3-nanopi-neo.dtb \
> sun8i-h3-orangepi-2.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
> new file mode 100644
> index 0000000..d18807f
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
> @@ -0,0 +1,159 @@
> +/*
> + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
> + *
> + * Based on sun8i-h3-orangepi-one.dts, which is:
> + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun8i-h3.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
> +
> +/ {
> + model = "Xunlong Orange Pi Zero";
> + compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus";
> +
> + aliases {
> + serial0 = &uart0;
> + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
It is not defined there as for:
cef87e9 (tag: next-20161205) 20 hours ago Stephen Rothwell Add linux-next
specific files for 20161205
> + ethernet1 = &xr819;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + pwr_led {
> + label = "orangepi:green:pwr";
> + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };
> +
> + status_led {
> + label = "orangepi:red:status";
> + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + reg_vcc_wifi: reg_vcc_wifi {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-wifi";
> + enable-active-high;
> + gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
> + };
> +
> + wifi_pwrseq: wifi_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins_a>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
> + cd-inverted;
> + status = "okay";
> +};
> +
> +&mmc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc1_pins_a>;
> + vmmc-supply = <®_vcc_wifi>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +
> + /*
> + * Explicitly define the sdio device, so that we can add an ethernet
> + * alias for it (which e.g. makes u-boot set a mac-address).
> + */
> + xr819: sdio_wifi@1 {
> + reg = <1>;
> + };
> +};
> +
> +&mmc1_pins_a {
> + bias-pull-up;
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>;
> + status = "disabled";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2_pins>;
> + status = "disabled";
> +};
> +
> +&usbphy {
> + /* USB VBUS is always on */
> + status = "okay";
> +};
>
--
Alexey
^ permalink raw reply
* [PATCH v3 2/2] reset: hisilicon: add reset-hi3660
From: Zhangfei Gao @ 2016-12-06 1:51 UTC (permalink / raw)
To: Rob Herring, Philipp Zabel, Arnd Bergmann, haojian.zhuang
Cc: devicetree, linux-arm-kernel, Zhangfei Gao
In-Reply-To: <1480989092-31847-1-git-send-email-zhangfei.gao@linaro.org>
Add hi3660 reset driver
Example of dts usage:
iomcu_rst: iomcu_rst_controller {
compatible = "hisilicon,hi3660-reset";
hisi,rst-syscon = <&iomcu>;
#reset-cells = <2>;
};
i2c0: i2c@..... {
...
resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */
...
};
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
drivers/reset/hisilicon/Kconfig | 7 ++
drivers/reset/hisilicon/Makefile | 1 +
drivers/reset/hisilicon/reset-hi3660.c | 126 +++++++++++++++++++++++++++++++++
3 files changed, 134 insertions(+)
create mode 100644 drivers/reset/hisilicon/reset-hi3660.c
diff --git a/drivers/reset/hisilicon/Kconfig b/drivers/reset/hisilicon/Kconfig
index 1ff8b0c..10134dc 100644
--- a/drivers/reset/hisilicon/Kconfig
+++ b/drivers/reset/hisilicon/Kconfig
@@ -1,3 +1,10 @@
+config COMMON_RESET_HI3660
+ tristate "Hi3660 Reset Driver"
+ depends on ARCH_HISI || COMPILE_TEST
+ default ARCH_HISI
+ help
+ Build the Hisilicon Hi3660 reset driver.
+
config COMMON_RESET_HI6220
tristate "Hi6220 Reset Driver"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/reset/hisilicon/Makefile b/drivers/reset/hisilicon/Makefile
index c932f86..ab8a7bf 100644
--- a/drivers/reset/hisilicon/Makefile
+++ b/drivers/reset/hisilicon/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_COMMON_RESET_HI6220) += hi6220_reset.o
+obj-$(CONFIG_COMMON_RESET_HI3660) += reset-hi3660.o
diff --git a/drivers/reset/hisilicon/reset-hi3660.c b/drivers/reset/hisilicon/reset-hi3660.c
new file mode 100644
index 0000000..17d8bb12
--- /dev/null
+++ b/drivers/reset/hisilicon/reset-hi3660.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2016-2017 Linaro Ltd.
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+struct hi3660_reset_controller {
+ struct reset_controller_dev rst;
+ struct regmap *map;
+};
+
+#define to_hi3660_reset_controller(_rst) \
+ container_of(_rst, struct hi3660_reset_controller, rst)
+
+static int hi3660_reset_program_hw(struct reset_controller_dev *rcdev,
+ unsigned long idx, bool assert)
+{
+ struct hi3660_reset_controller *rc = to_hi3660_reset_controller(rcdev);
+ unsigned int offset = idx >> 8;
+ unsigned int mask = BIT(idx & 0x1f);
+
+ if (assert)
+ return regmap_write(rc->map, offset, mask);
+ else
+ return regmap_write(rc->map, offset + 4, mask);
+}
+
+static int hi3660_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ return hi3660_reset_program_hw(rcdev, idx, true);
+}
+
+static int hi3660_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ return hi3660_reset_program_hw(rcdev, idx, false);
+}
+
+static int hi3660_reset_dev(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ int err;
+
+ err = hi3660_reset_assert(rcdev, idx);
+ if (err)
+ return err;
+
+ return hi3660_reset_deassert(rcdev, idx);
+}
+
+static struct reset_control_ops hi3660_reset_ops = {
+ .reset = hi3660_reset_dev,
+ .assert = hi3660_reset_assert,
+ .deassert = hi3660_reset_deassert,
+};
+
+static int hi3660_reset_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ unsigned int offset, bit;
+
+ offset = reset_spec->args[0];
+ bit = reset_spec->args[1];
+
+ return (offset << 8) | bit;
+}
+
+static int hi3660_reset_probe(struct platform_device *pdev)
+{
+ struct hi3660_reset_controller *rc;
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+
+ rc = devm_kzalloc(dev, sizeof(*rc), GFP_KERNEL);
+ if (!rc)
+ return -ENOMEM;
+
+ rc->map = syscon_regmap_lookup_by_phandle(np, "hisi,rst-syscon");
+ if (IS_ERR(rc->map)) {
+ dev_err(dev, "failed to get hi3660,rst-syscon\n");
+ return PTR_ERR(rc->map);
+ }
+
+ rc->rst.ops = &hi3660_reset_ops,
+ rc->rst.of_node = np;
+ rc->rst.of_reset_n_cells = 2;
+ rc->rst.of_xlate = hi3660_reset_xlate;
+
+ return reset_controller_register(&rc->rst);
+}
+
+static const struct of_device_id hi3660_reset_match[] = {
+ { .compatible = "hisilicon,hi3660-reset", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, hi3660_reset_match);
+
+static struct platform_driver hi3660_reset_driver = {
+ .probe = hi3660_reset_probe,
+ .driver = {
+ .name = "hi3660-reset",
+ .of_match_table = hi3660_reset_match,
+ },
+};
+
+static int __init hi3660_reset_init(void)
+{
+ return platform_driver_register(&hi3660_reset_driver);
+}
+arch_initcall(hi3660_reset_init);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:hi3660-reset");
+MODULE_DESCRIPTION("HiSilicon Hi3660 Reset Driver");
--
2.7.4
^ permalink raw reply related
* [PATCH v3 1/2] dt-bindings: Document the hi3660 reset bindings
From: Zhangfei Gao @ 2016-12-06 1:51 UTC (permalink / raw)
To: Rob Herring, Philipp Zabel, Arnd Bergmann, haojian.zhuang
Cc: devicetree, linux-arm-kernel, Zhangfei Gao
In-Reply-To: <1480989092-31847-1-git-send-email-zhangfei.gao@linaro.org>
Add DT bindings documentation for hi3660 SoC reset controller.
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
.../bindings/reset/hisilicon,hi3660-reset.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
new file mode 100644
index 0000000..178e478
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
@@ -0,0 +1,36 @@
+Hisilicon System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller registers are part of the system-ctl block on
+hi3660 SoC.
+
+Required properties:
+- compatible: should be
+ "hisilicon,hi3660-reset"
+- #reset-cells: 2, see below
+- hisi,rst-syscon: phandle of the reset's syscon.
+
+Example:
+ iomcu: iomcu@ffd7e000 {
+ compatible = "hisilicon,hi3660-iomcu", "syscon";
+ reg = <0x0 0xffd7e000 0x0 0x1000>;
+ };
+
+ iomcu_rst: iomcu_rst_controller {
+ compatible = "hisilicon,hi3660-reset";
+ hisi,rst-syscon = <&iomcu>;
+ #reset-cells = <2>;
+ };
+
+Specifying reset lines connected to IP modules
+==============================================
+example:
+
+ i2c0: i2c@..... {
+ ...
+ resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */
+ ...
+ };
--
2.7.4
^ permalink raw reply related
* [PATCH v3 0/2] add reset-hi3660
From: Zhangfei Gao @ 2016-12-06 1:51 UTC (permalink / raw)
To: Rob Herring, Philipp Zabel, Arnd Bergmann, haojian.zhuang
Cc: devicetree, linux-arm-kernel, Zhangfei Gao
v3:
change dts usage suggested by Arnd
from
resets = <&iomcu_rst 0>;
to
resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */
v2:
Considering Arnd and Philipp suggestions,
move reset register to dts as table instead of dts header in case of ABI issue
Zhangfei Gao (2):
dt-bindings: Document the hi3660 reset bindings
reset: hisilicon: add reset-hi3660
.../bindings/reset/hisilicon,hi3660-reset.txt | 36 ++++++
drivers/reset/hisilicon/Kconfig | 7 ++
drivers/reset/hisilicon/Makefile | 1 +
drivers/reset/hisilicon/reset-hi3660.c | 126 +++++++++++++++++++++
4 files changed, 170 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
create mode 100644 drivers/reset/hisilicon/reset-hi3660.c
--
2.7.4
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox