* Re: [PATCH v12 0/4] dtc: Dynamic DT support
From: Maxime Ripard @ 2016-12-06 7:48 UTC (permalink / raw)
To: Pantelis Antoniou
Cc: David Gibson, Jon Loeliger, Grant Likely, Frank Rowand,
Rob Herring, Jan Luebbe, Sascha Hauer, Phil Elwell, Simon Glass,
Thomas Petazzoni, Boris Brezillon, Antoine Tenart, Stephen Boyd,
Devicetree Compiler, devicetree-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1480957528-8367-1-git-send-email-pantelis.antoniou-OWPKS81ov/FWk0Htik3J/w@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 949 bytes --]
On Mon, Dec 05, 2016 at 07:05:21PM +0200, Pantelis Antoniou wrote:
> This patchset adds Dynamic DT support in the DTC compiler
> as used in a number of boards like the beaglebone/rpi/chip and others.
>
> The first patch documents the internals of overlay generation, while
> the second one adds dynamic object/overlay support proper.
>
> The third patch adds a test method that can is used by the subsequent
> patch which adds a few overlay tests verifying operation.
>
> The following 3 patches add support for the syntactic sugar version
> of &foo { }; in a similar manner.
>
> This patchset is against DTC mainline and is also available for a pull
> request from https://github.com/pantoniou/dtc/tree/overlays
Tested-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
* Re: [PATCH v3 -next 2/2] ARM: dts: sunxi: add support for Orange Pi Zero board
From: Icenowy Zheng @ 2016-12-06 7:43 UTC (permalink / raw)
To: Alexey Kardashevskiy
Cc: Vishnu Patekar, Rob Herring, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
Andre Przywara, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-doc-u79uwXL29TY76Z2rM5mHXA, Hans de Goede, Arnd Bergmann,
Russell King, Maxime Ripard,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Chen-Yu Tsai
2016年12月6日 09:51于 Alexey Kardashevskiy <aik@ozlabs.ru>写道：
>
> On 03/12/16 02:05, Icenowy Zheng wrote:
> > Orange Pi Zero is a board that came with the new Allwinner H2+ SoC and a
> > SDIO Wi-Fi chip by Allwinner (XR819).
> >
> > Add a device tree file for it.
> >
> > Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
> > ---
> > Changes since v2:
> > - Merged SDIO Wi-Fi patch into it.
> > - SDIO Wi-Fi: add a ethernet1 alias to it, as it has no internal NVRAM.
> > - SDIO Wi-Fi: changed pinctrl binding to generic pinconf
> > - removed all gpio pinctrl nodes
> > - changed h2plus to h2-plus
> > Changes since v1:
> > - Convert to generic pinconf bindings.
> > - SDIO Wi-Fi: add patch.
> >
> > Some notes:
> > - The uart1 and uart2 is available on the unsoldered gpio header.
> > - The onboard USB connector has its Vbus directly connected to DCIN-5V (the
> > power jack)
> >
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 159 ++++++++++++++++++++++
> > 2 files changed, 160 insertions(+)
> > create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 6447abc..59f6e86 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -844,6 +844,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> > sun8i-a33-sinlinx-sina33.dtb \
> > sun8i-a83t-allwinner-h8homlet-v2.dtb \
> > sun8i-a83t-cubietruck-plus.dtb \
> > + sun8i-h2-plus-orangepi-zero.dtb \
> > sun8i-h3-bananapi-m2-plus.dtb \
> > sun8i-h3-nanopi-neo.dtb \
> > sun8i-h3-orangepi-2.dtb \
> > diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
> > new file mode 100644
> > index 0000000..d18807f
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
> > @@ -0,0 +1,159 @@
> > +/*
> > + * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
> > + *
> > + * Based on sun8i-h3-orangepi-one.dts, which is:
> > + * Copyright (C) 2016 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include "sun8i-h3.dtsi"
> > +#include "sunxi-common-regulators.dtsi"
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/pinctrl/sun4i-a10.h>
> > +
> > +/ {
> > + model = "Xunlong Orange Pi Zero";
> > + compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus";
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
>
>
> It is not defined there as for:
>
> cef87e9 (tag: next-20161205) 20 hours ago Stephen Rothwell Add linux-next
> specific files for 20161205
The driver of H3's obfuscated DesignWare MAC is not yet mainlined, so there won't be one ethernet0 now.
But it's reserved for the onboard Ethernet.
>
>
>
>
>
> > + ethernet1 = &xr819;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + leds {
> > + compatible = "gpio-leds";
> > +
> > + pwr_led {
> > + label = "orangepi:green:pwr";
> > + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
> > + default-state = "on";
> > + };
> > +
> > + status_led {
> > + label = "orangepi:red:status";
> > + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
> > + };
> > + };
> > +
> > + reg_vcc_wifi: reg_vcc_wifi {
> > + compatible = "regulator-fixed";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-name = "vcc-wifi";
> > + enable-active-high;
> > + gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + wifi_pwrseq: wifi_pwrseq {
> > + compatible = "mmc-pwrseq-simple";
> > + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
> > + };
> > +};
> > +
> > +&ehci1 {
> > + status = "okay";
> > +};
> > +
> > +&mmc0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&mmc0_pins_a>;
> > + vmmc-supply = <®_vcc3v3>;
> > + bus-width = <4>;
> > + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
> > + cd-inverted;
> > + status = "okay";
> > +};
> > +
> > +&mmc1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&mmc1_pins_a>;
> > + vmmc-supply = <®_vcc_wifi>;
> > + mmc-pwrseq = <&wifi_pwrseq>;
> > + bus-width = <4>;
> > + non-removable;
> > + status = "okay";
> > +
> > + /*
> > + * Explicitly define the sdio device, so that we can add an ethernet
> > + * alias for it (which e.g. makes u-boot set a mac-address).
> > + */
> > + xr819: sdio_wifi@1 {
> > + reg = <1>;
> > + };
> > +};
> > +
> > +&mmc1_pins_a {
> > + bias-pull-up;
> > +};
> > +
> > +&ohci1 {
> > + status = "okay";
> > +};
> > +
> > +&uart0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&uart0_pins_a>;
> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&uart1_pins>;
> > + status = "disabled";
> > +};
> > +
> > +&uart2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&uart2_pins>;
> > + status = "disabled";
> > +};
> > +
> > +&usbphy {
> > + /* USB VBUS is always on */
> > + status = "okay";
> > +};
> >
>
>
> --
> Alexey
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply
* Re: [PATCH 1/2] ARM: dts: sun8i: Specify memblock for Nano Pi M1
From: Milo Kim @ 2016-12-06 7:23 UTC (permalink / raw)
To: Maxime Ripard
Cc: Chen-Yu Tsai, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161205080932.xaqyl2httgxgso67@lukather>
On 12/05/2016 05:09 PM, Maxime Ripard wrote:
> On Mon, Dec 05, 2016 at 11:00:31AM +0900, Milo Kim wrote:
>> The board has DDR3 512MB. This patch helps scanning the memory and
>> adding memblock through the DT.
>>
>> Signed-off-by: Milo Kim <woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> ---
>> arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
>> index ec63d10..be3668f 100644
>> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
>> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
>> @@ -45,6 +45,11 @@
>> / {
>> model = "FriendlyArm NanoPi M1";
>> compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
>> +
>> + memory@40000000 {
>> + device_type = "memory";
>> + reg = <0x40000000 0x20000000>;
>> + };
>
> U-boot will fill that up, so there's no need to put it there.
Right, my intention was adding memblock through the DT whether the
bootload does or not. However I'm not sure the situation (missing
memblock in u-boot) could really happen.
Best regards,
Milo
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v3 2/2] mtd: spi-nor: add rockchip serial flash controller driver
From: Shawn Lin @ 2016-12-06 7:15 UTC (permalink / raw)
To: Marek Vasut, Brian Norris
Cc: David Woodhouse, shawn.lin-TNX95d0MmH7DzftRWevZcw,
devicetree-u79uwXL29TY76Z2rM5mHXA, Heiko Stuebner,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Rob Herring,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Cyrille Pitchen
In-Reply-To: <cdc8647b-77c5-5d74-931c-46bcebafae65-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On 2016/12/6 11:08, Marek Vasut wrote:
> On 12/06/2016 03:56 AM, Shawn Lin wrote:
>
> [...]
>
>>>> +static inline void rockchip_sfc_setup_transfer(struct spi_nor *nor,
>>>> + loff_t from_to,
>>>> + size_t len, u8 op_type)
>>>> +{
>>>> + struct rockchip_sfc_chip_priv *priv = nor->priv;
>>>> + struct rockchip_sfc *sfc = priv->sfc;
>>>> + u32 reg;
>>>> + u8 if_type = 0;
>>>> +
>>>> + if_type = get_if_type(sfc, nor->flash_read);
>>>> + writel_relaxed((if_type << SFC_CTRL_DATA_BITS_SHIFT) |
>>>> + (if_type << SFC_CTRL_ADDR_BITS_SHIFT) |
>>>> + (if_type << SFC_CTRL_CMD_BITS_SHIFT) |
>>>
>>> Hm, looking at this, does the controller only support n-n-n mode (1-1-1,
>>> 2-2-2, 4-4-4) ? Or why don't you allow 1-1-n/1-n-n/2-n-n ?
>>
>> No, it also could support 1-1-n, etc.
>> By looking at the cadence-quadspi.c, it only allows
>> CQSPI_INST_TYPE_SINGLE for f_pdata->addr_width and f_pdata->inst_width,
>> so finally it only supports 1-1-1, 1-1-2, 1-1-4?
>>
>>> I would like to hear some input from Cyrille on this one.
>
> The CQSPI driver indeed does only 1-1-x read thus far.
> I am not sure whether support for the other modes in the SPI NOR
> subsystem landed already, which is why I'd like to hear from
> Cyrille here.
>
> [...]
>
>>>> +#ifdef CONFIG_PM
>>>> +int rockchip_sfc_runtime_suspend(struct device *dev)
>>>> +{
>>>> + struct rockchip_sfc *sfc = dev_get_drvdata(dev);
>>>> +
>>>> + clk_disable_unprepare(sfc->hclk);
>>>> + return 0;
>>>> +}
>>>
>>> Was the suspend ever really tested with this block ? Is disabling clock
>>> really enough ?
>>
>> It was tested and we could do more, for instance power off the genpd,
>> but disabling clcok should be enough.
>
> What about putting the controller into some reset state , is that possible?
yup, there are two reset control for sfc for some Socs.
I will include them as optional properties to put the controller
into reset state.
>
>>>> +int rockchip_sfc_runtime_resume(struct device *dev)
>>>> +{
>>>> + struct rockchip_sfc *sfc = dev_get_drvdata(dev);
>>>> +
>>>> + clk_prepare_enable(sfc->hclk);
>>>> + return 0;
>>>> +}
>>>> +#endif /* CONFIG_PM */
>>>
>>> [...]
>>>
>>
>>
>
>
--
Best Regards
Shawn Lin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 1/3] ARM: dts: imx6: Add Savageboard common file
From: Milo Kim @ 2016-12-06 7:11 UTC (permalink / raw)
To: Fabio Estevam
Cc: Shawn Guo, Sascha Hauer, Fabio Estevam,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel
In-Reply-To: <CAOMZO5BzLc7Xr9G0hLP1O4aYx+7J5gy0VHdQ3Kz0GFq=WdQ1gw@mail.gmail.com>
On 12/05/2016 08:36 PM, Fabio Estevam wrote:
> On Sun, Dec 4, 2016 at 11:07 PM, Milo Kim <woogyom.kim@gmail.com> wrote:
>
>> + regulators {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + reg_3p3v: regulator@0 {
>> + compatible = "regulator-fixed";
>> + reg = <0>;
>> + regulator-name = "3P3V";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-always-on;
>> + };
>
> Please remove the regulators container and put the regulator node
> directly as follows:
>
> reg_3p3v: regulator-3p3v {
> compatible = "regulator-fixed";
> regulator-name = "3P3V";
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> regulator-always-on;
> }
>
>> + };
>> +};
>> +
>> +&clks {
>> + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
>> + <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
>> + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
>> + <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
>> +};
>> +
>> +&fec {
>> + phy-mode = "rgmii";
>> + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
>
> I think you meant
> phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
>
>> +&iomuxc {
>> + savageboard {
>> + pinctrl_emmc: emmcgrp {
>> + fsl,pins = <
>> + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
>> + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
>> + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
>> + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
>> + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
>> + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
>> + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
>> + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
>> + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
>> + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>> + >;
>> + };
>
> You can remove the savegeboard level. Please check
> arch/arm/boot/dts/imx6q-tbs2910.dts.
>
> iomux usually go as the last node of the dts file.
Thanks a lot for all your feedback. I just submitted the v2.
Best regards,
Milo
^ permalink raw reply
* [PATCH v2 3/3] ARM: dts: imx6: Support Savageboard quad
From: Milo Kim @ 2016-12-06 7:08 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer
Cc: Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Milo Kim
In-Reply-To: <20161206070829.24098-1-woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Use common board file and support SATA interface additionally.
Signed-off-by: Milo Kim <woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/imx6q-savageboard.dts | 54 +++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-savageboard.dts
diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/imx6q-savageboard.dts
new file mode 100644
index 0000000..8d74002
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-savageboard.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+ model = "Poslab SavageBoard Quad";
+ compatible = "poslab,imx6q-savageboard", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v2 2/3] ARM: dts: imx6: Support Savageboard dual
From: Milo Kim @ 2016-12-06 7:08 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer
Cc: Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Milo Kim
In-Reply-To: <20161206070829.24098-1-woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Common savageboard DT file is used for board support.
Signed-off-by: Milo Kim <woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/imx6dl-savageboard.dts | 50 ++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-savageboard.dts
diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts
new file mode 100644
index 0000000..2cac30d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-savageboard.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+ model = "Poslab SavageBoard Dual";
+ compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";
+};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v2 1/3] ARM: dts: imx6: Add Savageboard common file
From: Milo Kim @ 2016-12-06 7:08 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer
Cc: Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel,
Milo Kim
In-Reply-To: <20161206070829.24098-1-woogyom.kim@gmail.com>
* Memory
memblock for DDR3 1GB
* Regulator
3.3V for panel and backlight.
* Display
Enable HDMI and LVDS panel. Savageboard supports AVIC TM097TDH02 panel
which is compatible with Hannstar HSD100PXN1, so reuse it.
* Clock
The commit d28be499c45e6 is applied to support LVDS and HDMI output
simultaneously.
* Pinmux
eMMC, ethernet, HDMI, I2C, power button, PWM, SD card and UART.
* Others
Enable ethernet, UART1 debug, USB host, USDHC3 for microSD card and
USDHC4 for built-in eMMC storage.
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 262 +++++++++++++++++++++++++++++
1 file changed, 262 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qdl-savageboard.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
new file mode 100644
index 0000000..a7a7e1d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+
+ backlight: panel_bl {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <4>;
+ power-supply = <®_3p3v>;
+ pwms = <&pwm1 0 10000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ panel {
+ compatible = "avic, tm097tdh02", "hannstar,hsd100pxn1";
+ backlight = <&backlight>;
+ power-supply = <®_3p3v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_tx_cec>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ reg = <0>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+/* SD card */
+&usdhc3 {
+ bus-width = <4>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc4 {
+ bus-width = <8>;
+ keep-power-in-suspend;
+ no-1-8-v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_emmc: emmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ /* PHY reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+ >;
+ };
+
+ pinctrl_hdmi_tx_cec: hdmitxcecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_sd: sdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ /* CD pin */
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v2 0/3] ARM: dts: imx6: Support Poslab Savageboard dual & quad
From: Milo Kim @ 2016-12-06 7:08 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer
Cc: Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Milo Kim
Poslab Savageboard is i.MX6 SoC base, but BSP code from the vendor is
not mainline u-boot and kernel. Personal reason of using this board is
testing etnaviv user-space driver, so I re-write device tree files based on
mainline kernel for the first step.
This patchset includes common DT file, dual and quad board files.
Supported components are
- Display: HDMI and LVDS panel
- eMMC and SD card
- Ethernet
- Pinmux configuration
- SATA: only for Savageboard quad
- UART1 for debug console
- USB host
Missing features are
- Audio (WM8903)
- USB OTG
- PMIC WM8326: default settings are used so no issue to bring-up the system
- MIPI DSI, CSI
Patches are tested on the Savageboard quad but the dual version should work
because the only difference between dual and quad is SATA support.
More information in http://www.savageboard.org
v2:
Fix DT node for regulator, phy-reset-gpios and iomuxc node.
Milo Kim (3):
ARM: dts: imx6: Add Savageboard common file
ARM: dts: imx6: Support Savageboard dual
ARM: dts: imx6: Support Savageboard quad
arch/arm/boot/dts/imx6dl-savageboard.dts | 50 ++++++
arch/arm/boot/dts/imx6q-savageboard.dts | 54 ++++++
arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 262 +++++++++++++++++++++++++++++
3 files changed, 366 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-savageboard.dts
create mode 100644 arch/arm/boot/dts/imx6q-savageboard.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-savageboard.dtsi
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: usb:xhci: support disable usb2 LPM Remote Wakeup
From: Greg Kroah-Hartman @ 2016-12-06 7:06 UTC (permalink / raw)
To: Thang Q. Nguyen
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Mathias Nyman, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA, Phong Vo, Loc Ho, Vu Nguyen,
patches
In-Reply-To: <CAKrQpSvyYKSAXurDkQXkASd9ELOUUEQmd6VF5TOKPkitRTTmOw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Tue, Dec 06, 2016 at 01:59:00PM +0700, Thang Q. Nguyen wrote:
> Hi,
> Do you have any feedback on this?
>
> Thanks,
> Thang Q. Nguyen
>
> On Sun, Dec 4, 2016 at 7:42 PM, Thang Q. Nguyen <tqnguyen-qTEPVZfXA3Y@public.gmane.org> wrote:
It has been 1 day, please relax, wait, and be patient. If after 2 weeks
there has not been a response, then feel free to resend, but not after
just 1 day...
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: usb:xhci: support disable usb2 LPM Remote Wakeup
From: Thang Q. Nguyen @ 2016-12-06 6:59 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Mathias Nyman, Greg Kroah-Hartman,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA
Cc: Thang Nguyen, Phong Vo, Loc Ho, Vu Nguyen, patches
In-Reply-To: <1480855321-5047-1-git-send-email-tqnguyen-qTEPVZfXA3Y@public.gmane.org>
Hi,
Do you have any feedback on this?
Thanks,
Thang Q. Nguyen
On Sun, Dec 4, 2016 at 7:42 PM, Thang Q. Nguyen <tqnguyen-qTEPVZfXA3Y@public.gmane.org> wrote:
> From: Thang Nguyen <tqnguyen-qTEPVZfXA3Y@public.gmane.org>
>
> As per USB 2.0 link power management addendum ECN, table 1-2, page 4,
> device or host initiated via resume signaling; device-initiated resumes
> can be optionally enabled/disabled by software. This patch adds support
> to control enabling the USB2 RWE feature via DT/ACPI attribute.
>
> Signed-off-by: Vu Nguyen <vnguyen-qTEPVZfXA3Y@public.gmane.org>
> Signed-off-by: Thang Nguyen <tqnguyen-qTEPVZfXA3Y@public.gmane.org>
> ---
> Documentation/devicetree/bindings/usb/usb-xhci.txt | 1 +
> drivers/usb/host/xhci-plat.c | 3 +++
> drivers/usb/host/xhci.c | 5 ++++-
> drivers/usb/host/xhci.h | 1 +
> 4 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> index 966885c..9b4cd14 100644
> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
> @@ -25,6 +25,7 @@ Required properties:
>
> Optional properties:
> - clocks: reference to a clock
> + - usb2-rwe-disable: disable USB2 LPM Remote Wakeup capable
> - usb3-lpm-capable: determines if platform is USB3 LPM capable
>
> Example:
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index ed56bf9..15c540d 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -220,6 +220,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
> goto disable_clk;
> }
>
> + if (device_property_read_bool(&pdev->dev, "usb2-rwe-disable"))
> + xhci->quirks |= XHCI_RWE_DISABLE;
> +
> if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable"))
> xhci->quirks |= XHCI_LPM_SUPPORT;
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 1a4ca02..f804868 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -4183,7 +4183,10 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
> }
>
> pm_val &= ~PORT_HIRD_MASK;
> - pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
> + if ((xhci->quirks & XHCI_RWE_DISABLE) && (xhci->hci_version <= 0x100))
> + pm_val |= PORT_HIRD(hird) | PORT_L1DS(udev->slot_id);
> + else
> + pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
> writel(pm_val, pm_addr);
> pm_val = readl(pm_addr);
> pm_val |= PORT_HLE;
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index f945380..2b9bc33 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1656,6 +1656,7 @@ struct xhci_hcd {
> #define XHCI_SSIC_PORT_UNUSED (1 << 22)
> #define XHCI_NO_64BIT_SUPPORT (1 << 23)
> #define XHCI_MISSING_CAS (1 << 24)
> +#define XHCI_RWE_DISABLE (1 << 25)
> unsigned int num_active_eps;
> unsigned int limit_active_eps;
> /* There are two roothubs to keep track of bus suspend info for */
> --
> 2.7.4
>
--
Thang Q. Nguyen | Staff SW Eng.
C: +849.7684.7606 | O: +848.3770.0640
F: +848.3770.0641 | tqnguyen-qTEPVZfXA3Y@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v5 13/14] ASoC: add simple-graph-scu-card document
From: Kuninori Morimoto @ 2016-12-06 6:33 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Brown, Linux-ALSA, Liam Girdwood, Simon, Laurent, Guennadi,
Grant Likely, Frank Rowand, Linux-DT, Linux-Kernel
In-Reply-To: <20161205224038.obcrqcvsruaajexy@rob-hp-laptop>
Hi Rob
> > +Simple-Graph-SCU-Card:
> > +
> > +Simple-Graph-SCU-Card specifies audio DAI connections of SoC <-> codec.
> > +It is based on common bindings for device graphs.
> > +see ${LINUX}/Documentation/devicetree/bindings/graph.txt
> > +
> > +Basically, Simple-Graph-SCU-Card property is same as Simple-Card / Simple-Graph-Card.
> > +see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
> > + ${LINUX}/Documentation/devicetree/bindings/sound/simple-graph-card.txt
> > +
> > +Main difference between Simple-Graph-Card and Simple-Graph-SCU-Card is that
> > +Simple-Graph-SCU-Card can use multi CPU.
>
> So it can have more that 1 port? At least for the bindings, I think you
> should combine these 2 bindings. Whether the driver should be combined
> is separate question. I imagine you have 2 compatible strings because
> you have 2 drivers, but that isn't really a reason to have 2.
The difference these 2 are, 1) compatible name 2) single port / multi port.
From ALSA SoC point of view, they are using different feature,
but from DT point of view, they are almost same.
Combine these are OK, but my question is can we use different "compatible" ?
Or same "compatible" but switch single/multi somehow ?
Best regards
---
Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [RESEND PATCH V3 4/4] gpio: pv88080: Add GPIO function support
From: Eric Jeong @ 2016-12-06 5:33 UTC (permalink / raw)
To: Alexandre Courbot, LINUX-GPIO, LINUX-KERNEL, Linus Walleij
Cc: DEVICETREE, Lee Jones, Liam Girdwood, Mark Brown, Mark Rutland,
Rob Herring, Support Opensource
In-Reply-To: <cover.1481002393.git.eric.jeong@diasemi.com>
From: Eric Jeong <eric.jeong.opensource@diasemi.com>
This patch adds support for PV88080 PMIC GPIOs.
PV88080 has two configurable GPIOs.
Kconfig and Makefile are updated to reflect support
for PV88080 PMIC GPIO.
Signed-off-by: Eric Jeong <eric.jeong.opensource@diasemi.com>
---
This patch applies against linux-next and next-20161117
Hi,
Change since PATCH V2
- Add the set_single_ended function
- Add property reading function
- Simplify and clarfy the funcion of gpio_chip
Change since PATCH V1
- Patch separated from PATCH V1
Regards,
Eric Jeong, Dialog Semiconductor Ltd.
drivers/gpio/Kconfig | 11 +++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-pv88080.c | 213 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 225 insertions(+)
create mode 100644 drivers/gpio/gpio-pv88080.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a9a1c8a..cb11686 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -949,6 +949,17 @@ config GPIO_PALMAS
Select this option to enable GPIO driver for the TI PALMAS
series chip family.
+config GPIO_PV88080
+ tristate "Powerventure Semiconductor PV88080 GPIO"
+ depends on MFD_PV88080
+ help
+ Support for GPIO pins on PV88080 PMIC.
+
+ Say yes here to enable the GPIO driver for the PV88080 chip.
+
+ The Powerventure PMIC chip has 2 GPIO pins that can be
+ controlled by this driver.
+
config GPIO_RC5T583
bool "RICOH RC5T583 GPIO"
depends on MFD_RC5T583
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 8043a95..2a2311e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+obj-$(CONFIG_GPIO_PV88080) += gpio-pv88080.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
diff --git a/drivers/gpio/gpio-pv88080.c b/drivers/gpio/gpio-pv88080.c
new file mode 100644
index 0000000..6f4734f
--- /dev/null
+++ b/drivers/gpio/gpio-pv88080.c
@@ -0,0 +1,213 @@
+/*
+ * gpio-pv88080.c - GPIO device driver for PV88080
+ * Copyright (C) 2016 Powerventure Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/pv88080.h>
+
+#define PV88080_PORT_DIRECTION_INPUT 0
+#define PV88080_PORT_DIRECTION_OUTPUT 1
+
+struct pv88080_gpio {
+ struct pv88080 *chip;
+ struct gpio_chip gpio_chip;
+ unsigned int input_reg;
+ unsigned int output_reg;
+ unsigned int gpio_base_reg;
+};
+
+static int pv88080_gpio_get_direction(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ struct pv88080_gpio *priv = gpiochip_get_data(gc);
+ struct pv88080 *chip = priv->chip;
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(chip->regmap, priv->gpio_base_reg + offset, &value);
+ if (ret)
+ return ret;
+
+ value = !(value & PV88080_GPIO_DIRECTION_MASK);
+
+ return value;
+}
+
+static int pv88080_gpio_direction_input(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ struct pv88080_gpio *priv = gpiochip_get_data(gc);
+ struct pv88080 *chip = priv->chip;
+
+ return regmap_update_bits(chip->regmap, priv->gpio_base_reg + offset,
+ PV88080_GPIO_DIRECTION_MASK, 0);
+}
+
+static int pv88080_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ struct pv88080_gpio *priv = gpiochip_get_data(gc);
+ struct pv88080 *chip = priv->chip;
+
+ return regmap_update_bits(chip->regmap, priv->gpio_base_reg + offset,
+ PV88080_GPIO_DIRECTION_MASK, 1);
+}
+
+static int pv88080_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ struct pv88080_gpio *priv = gpiochip_get_data(gc);
+ struct pv88080 *chip = priv->chip;
+ unsigned int reg, value;
+ int ret;
+
+ ret = regmap_read(chip->regmap, priv->gpio_base_reg + offset, &value);
+ if (ret < 0)
+ return ret;
+
+ if (value & PV88080_GPIO_DIRECTION_MASK)
+ reg = priv->output_reg;
+ else
+ reg = priv->input_reg;
+
+ ret = regmap_read(chip->regmap, reg, &value);
+ if (ret < 0)
+ return ret;
+
+ value = !!(value & BIT(offset));
+
+ return value;
+}
+
+static void pv88080_gpio_set(struct gpio_chip *gc, unsigned int offset,
+ int value)
+{
+ struct pv88080_gpio *priv = gpiochip_get_data(gc);
+ struct pv88080 *chip = priv->chip;
+ int ret;
+
+ ret = regmap_update_bits(chip->regmap, priv->output_reg,
+ BIT(offset), (value << offset));
+ if (ret < 0)
+ dev_err(chip->dev, "Failed to update gpio\n");
+}
+
+static int pv88080_set_single_ended(struct gpio_chip *gc,
+ unsigned int offset,
+ enum single_ended_mode mode)
+{
+ struct pv88080_gpio *priv = gpiochip_get_data(gc);
+ struct pv88080 *chip = priv->chip;
+ int ret;
+
+ switch (mode) {
+ case LINE_MODE_OPEN_DRAIN:
+ ret = regmap_update_bits(chip->regmap,
+ priv->gpio_base_reg + offset,
+ PV88080_GPIO_SINGLE_ENDED_MASK, 0);
+ break;
+ case LINE_MODE_PUSH_PULL:
+ ret = regmap_update_bits(chip->regmap,
+ priv->gpio_base_reg + offset,
+ PV88080_GPIO_SINGLE_ENDED_MASK, 1 << 1);
+ break;
+ default:
+ ret = -ENOTSUPP;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct gpio_chip template_gpio = {
+ .label = "pv88080-gpio",
+ .owner = THIS_MODULE,
+ .get_direction = pv88080_gpio_get_direction,
+ .direction_input = pv88080_gpio_direction_input,
+ .direction_output = pv88080_gpio_direction_output,
+ .get = pv88080_gpio_get,
+ .set = pv88080_gpio_set,
+ .set_single_ended = pv88080_set_single_ended,
+ .base = -1,
+ .ngpio = 2,
+};
+
+static const struct of_device_id pv88080_gpio_of_match[] = {
+ { .compatible = "pvs,pv88080-gpio", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, pv88080_gpio_of_match);
+
+static int pv88080_gpio_probe(struct platform_device *pdev)
+{
+ struct pv88080 *chip = dev_get_drvdata(pdev->dev.parent);
+ struct pv88080_gpio *priv;
+ struct device_node *np = pdev->dev.of_node;
+ u32 ngpios;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev,
+ sizeof(struct pv88080_gpio), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->chip = chip;
+ priv->gpio_chip = template_gpio;
+ priv->gpio_chip.parent = &pdev->dev;
+
+ switch (chip->type) {
+ case TYPE_PV88080_AA:
+ priv->input_reg = PV88080AA_REG_GPIO_INPUT;
+ priv->output_reg = PV88080AA_REG_GPIO_OUTPUT;
+ priv->gpio_base_reg = PV88080AA_REG_GPIO_GPIO0;
+ break;
+ case TYPE_PV88080_BA:
+ priv->input_reg = PV88080BA_REG_GPIO_INPUT;
+ priv->output_reg = PV88080BA_REG_GPIO_OUTPUT;
+ priv->gpio_base_reg = PV88080BA_REG_GPIO_GPIO0;
+ break;
+ }
+
+ if (!of_property_read_u32(np, "ngpios", &ngpios))
+ priv->gpio_chip.ngpio = ngpios;
+
+ ret = devm_gpiochip_add_data(&pdev->dev, &priv->gpio_chip, priv);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to register gpiochip\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static struct platform_driver pv88080_gpio_driver = {
+ .driver = {
+ .name = "pv88080-gpio",
+ .of_match_table = of_match_ptr(pv88080_gpio_of_match),
+ },
+ .probe = pv88080_gpio_probe,
+};
+module_platform_driver(pv88080_gpio_driver);
+
+MODULE_AUTHOR("Eric Jeong <eric.jeong.opensource@diasemi.com>");
+MODULE_DESCRIPTION("GPIO device driver for Powerventure PV88080");
+MODULE_LICENSE("GPL");
+
--
end-of-patch for RESEND PATCH V3
^ permalink raw reply related
* [PATCH v4 6/6] arm: dts: aspeed-g5: Add gpio controller to devicetree
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161206035348.29948-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 6ccabdb90e95..a95c1b08a816 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -898,6 +898,16 @@
reg = <0x1e720000 0x9000>; // 36K
};
+ gpio: gpio@1e780000 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2500-gpio";
+ reg = <0x1e780000 0x1000>;
+ interrupts = <20>;
+ gpio-ranges = <&pinctrl 0 0 220>;
+ interrupt-controller;
+ };
+
timer: timer@1e782000 {
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v4 5/6] arm: dts: aspeed-g5: Add syscon and pin controller nodes
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206035348.29948-1-andrew@aj.id.au>
The pin controller's child nodes expose the functions currently
implemented in the g5 pin controller driver.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 816 +++++++++++++++++++++++++++++++++++++++
1 file changed, 816 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1968607326dd..6ccabdb90e95 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -44,6 +44,822 @@
reg = <0x1e6e2070 0x04>;
};
+ syscon: syscon@1e6e2000 {
+ compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g5-pinctrl";
+ aspeed,external-nodes = <&gfx &lhc>;
+
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
+
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
+
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
+
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
+
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
+
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
+
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
+
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
+
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
+
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
+
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
+
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
+
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
+
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
+
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
+
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
+
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
+
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
+
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
+
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
+
+ pinctrl_espi_default: espi_default {
+ function = "ESPI";
+ groups = "ESPI";
+ };
+
+ pinctrl_fwspics1_default: fwspics1_default {
+ function = "FWSPICS1";
+ groups = "FWSPICS1";
+ };
+
+ pinctrl_fwspics2_default: fwspics2_default {
+ function = "FWSPICS2";
+ groups = "FWSPICS2";
+ };
+
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
+
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
+
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
+
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
+
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
+
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
+
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
+
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
+
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
+
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
+
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
+
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
+
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
+
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
+
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
+
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
+
+ pinctrl_lad0_default: lad0_default {
+ function = "LAD0";
+ groups = "LAD0";
+ };
+
+ pinctrl_lad1_default: lad1_default {
+ function = "LAD1";
+ groups = "LAD1";
+ };
+
+ pinctrl_lad2_default: lad2_default {
+ function = "LAD2";
+ groups = "LAD2";
+ };
+
+ pinctrl_lad3_default: lad3_default {
+ function = "LAD3";
+ groups = "LAD3";
+ };
+
+ pinctrl_lclk_default: lclk_default {
+ function = "LCLK";
+ groups = "LCLK";
+ };
+
+ pinctrl_lframe_default: lframe_default {
+ function = "LFRAME";
+ groups = "LFRAME";
+ };
+
+ pinctrl_lpchc_default: lpchc_default {
+ function = "LPCHC";
+ groups = "LPCHC";
+ };
+
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
+
+ pinctrl_lpcplus_default: lpcplus_default {
+ function = "LPCPLUS";
+ groups = "LPCPLUS";
+ };
+
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
+
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
+
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
+
+ pinctrl_lsirq_default: lsirq_default {
+ function = "LSIRQ";
+ groups = "LSIRQ";
+ };
+
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
+
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
+
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
+
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
+
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
+
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
+
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
+
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
+
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
+
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
+
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
+
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
+
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
+
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
+
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
+
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
+
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
+
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
+
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
+
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
+
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
+
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
+
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
+
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
+
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
+
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
+
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
+
+ pinctrl_nrts4_default: nrts4_default {
+ function = "NRTS4";
+ groups = "NRTS4";
+ };
+
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
+
+ pinctrl_pewake_default: pewake_default {
+ function = "PEWAKE";
+ groups = "PEWAKE";
+ };
+
+ pinctrl_pnor_default: pnor_default {
+ function = "PNOR";
+ groups = "PNOR";
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
+
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
+
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
+
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
+
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
+
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
+
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
+
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
+
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
+
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
+
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
+
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
+
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
+
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
+
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
+
+ pinctrl_salt10_default: salt10_default {
+ function = "SALT10";
+ groups = "SALT10";
+ };
+
+ pinctrl_salt11_default: salt11_default {
+ function = "SALT11";
+ groups = "SALT11";
+ };
+
+ pinctrl_salt12_default: salt12_default {
+ function = "SALT12";
+ groups = "SALT12";
+ };
+
+ pinctrl_salt13_default: salt13_default {
+ function = "SALT13";
+ groups = "SALT13";
+ };
+
+ pinctrl_salt14_default: salt14_default {
+ function = "SALT14";
+ groups = "SALT14";
+ };
+
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
+
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
+
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
+
+ pinctrl_salt5_default: salt5_default {
+ function = "SALT5";
+ groups = "SALT5";
+ };
+
+ pinctrl_salt6_default: salt6_default {
+ function = "SALT6";
+ groups = "SALT6";
+ };
+
+ pinctrl_salt7_default: salt7_default {
+ function = "SALT7";
+ groups = "SALT7";
+ };
+
+ pinctrl_salt8_default: salt8_default {
+ function = "SALT8";
+ groups = "SALT8";
+ };
+
+ pinctrl_salt9_default: salt9_default {
+ function = "SALT9";
+ groups = "SALT9";
+ };
+
+ pinctrl_scl1_default: scl1_default {
+ function = "SCL1";
+ groups = "SCL1";
+ };
+
+ pinctrl_scl2_default: scl2_default {
+ function = "SCL2";
+ groups = "SCL2";
+ };
+
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
+
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
+
+ pinctrl_sda1_default: sda1_default {
+ function = "SDA1";
+ groups = "SDA1";
+ };
+
+ pinctrl_sda2_default: sda2_default {
+ function = "SDA2";
+ groups = "SDA2";
+ };
+
+ pinctrl_sgps1_default: sgps1_default {
+ function = "SGPS1";
+ groups = "SGPS1";
+ };
+
+ pinctrl_sgps2_default: sgps2_default {
+ function = "SGPS2";
+ groups = "SGPS2";
+ };
+
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
+
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
+
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
+
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
+
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
+
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
+
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
+
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
+
+ pinctrl_spi1cs1_default: spi1cs1_default {
+ function = "SPI1CS1";
+ groups = "SPI1CS1";
+ };
+
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
+
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
+
+ pinctrl_spi2ck_default: spi2ck_default {
+ function = "SPI2CK";
+ groups = "SPI2CK";
+ };
+
+ pinctrl_spi2cs0_default: spi2cs0_default {
+ function = "SPI2CS0";
+ groups = "SPI2CS0";
+ };
+
+ pinctrl_spi2cs1_default: spi2cs1_default {
+ function = "SPI2CS1";
+ groups = "SPI2CS1";
+ };
+
+ pinctrl_spi2miso_default: spi2miso_default {
+ function = "SPI2MISO";
+ groups = "SPI2MISO";
+ };
+
+ pinctrl_spi2mosi_default: spi2mosi_default {
+ function = "SPI2MOSI";
+ groups = "SPI2MOSI";
+ };
+
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
+
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
+
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_vgabiosrom_default: vgabiosrom_default {
+ function = "VGABIOSROM";
+ groups = "VGABIOSROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpo_default: vpo_default {
+ function = "VPO";
+ groups = "VPO";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
+ };
+
+ };
+ };
+
clk_hpll: clk_hpll@1e6e2024 {
#clock-cells = <0>;
compatible = "aspeed,g5-hpll-clock";
--
2.9.3
^ permalink raw reply related
* [PATCH v4 4/6] arm: dts: aspeed-g5: Add LPC Controller node
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206035348.29948-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index c7ff3ea4bf37..1968607326dd 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -92,6 +92,7 @@
clocks = <&clk_apb>;
};
+
wdt1: wdt@1e785000 {
compatible = "aspeed,wdt";
reg = <0x1e785000 0x1c>;
@@ -121,6 +122,36 @@
status = "disabled";
};
+ lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2500-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e789000 0x1000>;
+
+ lpc_bmc: lpc-bmc@0 {
+ compatible = "aspeed,ast2500-lpc-bmc";
+ reg = <0x0 0x80>;
+ };
+
+ lpc_host: lpc-host@80 {
+ compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80 0x1e0>;
+
+ reg-io-width = <4>;
+
+ lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
+ };
+ };
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x1000>;
--
2.9.3
^ permalink raw reply related
* [PATCH v4 3/6] arm: dts: aspeed-g5: Add SoC Display Controller node
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161206035348.29948-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index dd94d9361fda..c7ff3ea4bf37 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -71,6 +71,12 @@
reg = <0x1e6e202c 0x4>;
};
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ };
+
sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x9000>; // 36K
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v4 2/6] arm: dts: aspeed-g4: Add gpio controller to devicetree
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206035348.29948-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b00dfc7a3bf7..20b75667286f 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -822,6 +822,16 @@
reg = <0x1e720000 0x8000>; // 32K
};
+ gpio: gpio@1e780000 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2400-gpio";
+ reg = <0x1e780000 0x1000>;
+ interrupts = <20>;
+ gpio-ranges = <&pinctrl 0 0 220>;
+ interrupt-controller;
+ };
+
timer: timer@1e782000 {
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
--
2.9.3
^ permalink raw reply related
* [PATCH v4 1/6] arm: dts: aspeed-g4: Add syscon and pin controller nodes
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161206035348.29948-1-andrew@aj.id.au>
The pin controller's child nodes expose the functions currently
implemented in the the g4 pin controller driver.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 750 +++++++++++++++++++++++++++++++++++++++
1 file changed, 750 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 22dee5937d5c..b00dfc7a3bf7 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -54,6 +54,756 @@
clocks = <&clk_clkin>;
};
+ syscon: syscon@1e6e2000 {
+ compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g4-pinctrl";
+
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
+
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
+
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
+
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
+
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
+
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
+
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
+
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
+
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
+
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
+
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
+
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
+
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
+
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
+
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
+
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
+
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
+
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
+
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
+
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
+
+ pinctrl_extrst_default: extrst_default {
+ function = "EXTRST";
+ groups = "EXTRST";
+ };
+
+ pinctrl_flack_default: flack_default {
+ function = "FLACK";
+ groups = "FLACK";
+ };
+
+ pinctrl_flbusy_default: flbusy_default {
+ function = "FLBUSY";
+ groups = "FLBUSY";
+ };
+
+ pinctrl_flwp_default: flwp_default {
+ function = "FLWP";
+ groups = "FLWP";
+ };
+
+ pinctrl_gpid_default: gpid_default {
+ function = "GPID";
+ groups = "GPID";
+ };
+
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
+
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
+
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
+
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
+
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
+
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
+
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
+
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
+
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
+
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
+
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
+
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
+
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
+
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
+
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
+
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
+
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
+
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
+
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
+
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
+
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
+
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
+
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
+
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
+
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
+
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
+
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
+
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
+
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
+
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
+
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
+
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
+
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
+
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
+
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
+
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
+
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
+
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
+
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
+
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
+
+ pinctrl_ndts4_default: ndts4_default {
+ function = "NDTS4";
+ groups = "NDTS4";
+ };
+
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
+
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
+
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
+
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
+
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
+
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
+
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
+
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
+
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
+
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
+
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
+
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
+
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
+
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
+
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
+
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
+
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
+
+ pinctrl_rom16_default: rom16_default {
+ function = "ROM16";
+ groups = "ROM16";
+ };
+
+ pinctrl_rom8_default: rom8_default {
+ function = "ROM8";
+ groups = "ROM8";
+ };
+
+ pinctrl_romcs1_default: romcs1_default {
+ function = "ROMCS1";
+ groups = "ROMCS1";
+ };
+
+ pinctrl_romcs2_default: romcs2_default {
+ function = "ROMCS2";
+ groups = "ROMCS2";
+ };
+
+ pinctrl_romcs3_default: romcs3_default {
+ function = "ROMCS3";
+ groups = "ROMCS3";
+ };
+
+ pinctrl_romcs4_default: romcs4_default {
+ function = "ROMCS4";
+ groups = "ROMCS4";
+ };
+
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
+
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
+
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
+
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
+
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
+
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
+
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
+
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
+
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
+
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
+
+ pinctrl_sgpmck_default: sgpmck_default {
+ function = "SGPMCK";
+ groups = "SGPMCK";
+ };
+
+ pinctrl_sgpmi_default: sgpmi_default {
+ function = "SGPMI";
+ groups = "SGPMI";
+ };
+
+ pinctrl_sgpmld_default: sgpmld_default {
+ function = "SGPMLD";
+ groups = "SGPMLD";
+ };
+
+ pinctrl_sgpmo_default: sgpmo_default {
+ function = "SGPMO";
+ groups = "SGPMO";
+ };
+
+ pinctrl_sgpsck_default: sgpsck_default {
+ function = "SGPSCK";
+ groups = "SGPSCK";
+ };
+
+ pinctrl_sgpsi0_default: sgpsi0_default {
+ function = "SGPSI0";
+ groups = "SGPSI0";
+ };
+
+ pinctrl_sgpsi1_default: sgpsi1_default {
+ function = "SGPSI1";
+ groups = "SGPSI1";
+ };
+
+ pinctrl_sgpsld_default: sgpsld_default {
+ function = "SGPSLD";
+ groups = "SGPSLD";
+ };
+
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
+
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
+
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
+
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
+
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
+
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
+
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
+
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
+
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
+
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
+
+ pinctrl_spics1_default: spics1_default {
+ function = "SPICS1";
+ groups = "SPICS1";
+ };
+
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
+
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
+
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_vgabios_rom_default: vgabios_rom_default {
+ function = "VGABIOS_ROM";
+ groups = "VGABIOS_ROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi18_default: vpi18_default {
+ function = "VPI18";
+ groups = "VPI18";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpi30_default: vpi30_default {
+ function = "VPI30";
+ groups = "VPI30";
+ };
+
+ pinctrl_vpo12_default: vpo12_default {
+ function = "VPO12";
+ groups = "VPO12";
+ };
+
+ pinctrl_vpo24_default: vpo24_default {
+ function = "VPO24";
+ groups = "VPO24";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
+ };
+
+ };
+ };
+
clk_apb: clk_apb@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,g4-apb-clock";
--
2.9.3
^ permalink raw reply related
* [PATCH v4 0/6] aspeed: Integrate pinctrl and gpio drivers
From: Andrew Jeffery @ 2016-12-06 3:53 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Hello,
This picks up some work from a while back that adds pinctrl and GPIO support to
the Aspeed devicetrees. See the previous series:
https://lkml.org/lkml/2016/8/30/74
Since v3 two new patches have been added, describing the Low Pin Count bus and
SoC Display Controller nodes. These are essential for the aspeed-g5 pinctrl.
Cheers,
Andrew
Andrew Jeffery (6):
arm: dts: aspeed-g4: Add syscon and pin controller nodes
arm: dts: aspeed-g4: Add gpio controller to devicetree
arm: dts: aspeed-g5: Add SoC Display Controller node
arm: dts: aspeed-g5: Add LPC Controller node
arm: dts: aspeed-g5: Add syscon and pin controller nodes
arm: dts: aspeed-g5: Add gpio controller to devicetree
arch/arm/boot/dts/aspeed-g4.dtsi | 760 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 863 +++++++++++++++++++++++++++++++++++++++
2 files changed, 1623 insertions(+)
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH V7 00/10] PM / OPP: Multiple regulator support
From: Viresh Kumar @ 2016-12-06 3:15 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Rafael Wysocki, Lists linaro-kernel,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Stephen Boyd,
Nishanth Menon, Vincent Guittot, Rob Herring, Dave Gerlach,
Mark Brown, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
In-Reply-To: <CAJZ5v0gykH+UwMvgU3SCVgxg9Ufe23zQ1o9bEvnjtafVqjLa8Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On 06-12-16, 02:34, Rafael J. Wysocki wrote:
> I've queued them up, but I'd feel more comfortable with an ACK or
> Reviewed-by on patch [6/10] too.
Sure. I would still encourage Stephen to do it. Seems he is very busy now a days
:)
Thanks.
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v3 4/4] pinctrl: aspeed: Fix kerneldoc return descriptions
From: Andrew Jeffery @ 2016-12-06 3:11 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Joel Stanley,
linux-gpio, devicetree, linux-kernel
In-Reply-To: <20161206031152.3004-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 782c5c97f853..76f62bd45f02 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -97,7 +97,7 @@ static inline void aspeed_sig_desc_print_val(
* @enabled: True to query the enabled state, false to query disabled state
* @regmap: The IP block's regmap instance
*
- * @return 1 if the descriptor's bitfield is configured to the state
+ * Return: 1 if the descriptor's bitfield is configured to the state
* selected by @enabled, 0 if not, and less than zero if an unrecoverable
* failure occurred
*
@@ -134,7 +134,7 @@ static int aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
* @enabled: True to query the enabled state, false to query disabled state
* @maps: The list of regmap instances
*
- * @return 1 if the expression composed by @enabled evaluates true, 0 if not,
+ * Return: 1 if the expression composed by @enabled evaluates true, 0 if not,
* and less than zero if an unrecoverable failure occurred.
*
* A mux function is enabled or disabled if the function's signal expression
@@ -175,7 +175,7 @@ static int aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
* expression, false to disable the function's signal
* @maps: The list of regmap instances for pinmux register access.
*
- * @return 0 if the expression is configured as requested and a negative error
+ * Return: 0 if the expression is configured as requested and a negative error
* code otherwise
*/
static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
@@ -256,7 +256,7 @@ static int aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
* @exprs: The list of signal expressions (from a priority level on a pin)
* @maps: The list of regmap instances for pinmux register access.
*
- * @return 0 if all expressions are disabled, otherwise a negative error code
+ * Return: 0 if all expressions are disabled, otherwise a negative error code
*/
static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
struct regmap * const *maps)
@@ -281,8 +281,8 @@ static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
* @exprs: List of signal expressions (haystack)
* @name: The name of the requested function (needle)
*
- * @return A pointer to the signal expression whose function tag matches the
- * provided name, otherwise NULL.
+ * Return: A pointer to the signal expression whose function tag matches the
+ * provided name, otherwise NULL.
*
*/
static const struct aspeed_sig_expr *aspeed_find_expr_by_name(
--
2.9.3
^ permalink raw reply related
* [PATCH v3 3/4] pinctrl: aspeed-g5: Add mux configuration for all pins
From: Andrew Jeffery @ 2016-12-06 3:11 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Joel Stanley,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161206031152.3004-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
The patch introducing the g5 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms and the AST2500 evaluation board.
Now, update the bindings document to reflect the complete functionality
and implement the necessary pin configuration tables in the driver.
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
Acked-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 17 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 1476 +++++++++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 1 +
3 files changed, 1487 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index f5c427d11337..f16be8fe6c76 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -53,10 +53,19 @@ VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
-GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
-I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
-TIMER7 TIMER8 VGABIOSROM
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4
+GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6
+I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME
+LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1
+NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2
+NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4
+PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10
+SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9
+SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0
+SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2
+TXD3 TXD4 UART6 USBCKI VGABIOSROM VGAHS VGAVS VPI24 VPO WDTRST1 WDTRST2
g4 Example:
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index c5c9a1b6fa1c..43221a3c7e23 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -25,14 +25,28 @@
#include "../pinctrl-utils.h"
#include "pinctrl-aspeed.h"
-#define ASPEED_G5_NR_PINS 228
+#define ASPEED_G5_NR_PINS 232
#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+/* LHCR0 is offset from the end of the H8S/2168-compatible registers */
+#define LHCR0 0x20
+#define GFX064 0x64
+
#define B14 0
SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+#define D14 1
+SSSF_PIN_DECL(D14, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
+#define D13 2
+SIG_EXPR_LIST_DECL_SINGLE(SPI1CS1, SPI1CS1, SIG_DESC_SET(SCU80, 15));
+SIG_EXPR_LIST_DECL_SINGLE(TIMER3, TIMER3, SIG_DESC_SET(SCU80, 2));
+MS_PIN_DECL(D13, GPIOA2, SPI1CS1, TIMER3);
+FUNC_GROUP_DECL(SPI1CS1, D13);
+FUNC_GROUP_DECL(TIMER3, D13);
+
#define E13 3
SSSF_PIN_DECL(E13, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
@@ -72,6 +86,32 @@ FUNC_GROUP_DECL(TIMER8, B13);
FUNC_GROUP_DECL(MDIO2, C13, B13);
+#define K19 8
+GPIO_PIN_DECL(K19, GPIOB0);
+
+#define L19 9
+GPIO_PIN_DECL(L19, GPIOB1);
+
+#define L18 10
+GPIO_PIN_DECL(L18, GPIOB2);
+
+#define K18 11
+GPIO_PIN_DECL(K18, GPIOB3);
+
+#define J20 12
+SSSF_PIN_DECL(J20, GPIOB4, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+
+#define H21 13
+#define H21_DESC SIG_DESC_SET(SCU80, 13)
+SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCSMI, LPCSMI, H21_DESC);
+MS_PIN_DECL(H21, GPIOB5, LPCPD, LPCSMI);
+FUNC_GROUP_DECL(LPCPD, H21);
+FUNC_GROUP_DECL(LPCSMI, H21);
+
+#define H22 14
+SSSF_PIN_DECL(H22, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+
#define H20 15
GPIO_PIN_DECL(H20, GPIOB7);
@@ -168,7 +208,44 @@ MS_PIN_DECL(D20, GPIOD3, SD2DAT1, GPID2OUT);
FUNC_GROUP_DECL(GPID2, F20, D20);
-#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 21)
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define D21 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(D21, GPIOD4, SD2DAT2, GPID4IN);
+
+#define E20 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(E20, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, D21, E20);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define G18 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(G18, GPIOD6, SD2CD, GPID6IN);
+
+#define C21 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(C21, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, G18, C21);
+FUNC_GROUP_DECL(SD2, F19, E21, F20, D20, D21, E20, G18, C21);
+
+#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define B20 32
@@ -177,6 +254,7 @@ SIG_EXPR_DECL(GPIE0IN, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0IN, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0IN, GPIE0, GPIE);
MS_PIN_DECL(B20, GPIOE0, NCTS3, GPIE0IN);
+FUNC_GROUP_DECL(NCTS3, B20);
#define C20 33
SIG_EXPR_LIST_DECL_SINGLE(NDCD3, NDCD3, SIG_DESC_SET(SCU80, 17));
@@ -184,9 +262,227 @@ SIG_EXPR_DECL(GPIE0OUT, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0OUT, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0OUT, GPIE0, GPIE);
MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
+FUNC_GROUP_DECL(NDCD3, C20);
FUNC_GROUP_DECL(GPIE0, B20, C20);
+#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
+
+#define F18 34
+SIG_EXPR_LIST_DECL_SINGLE(NDSR3, NDSR3, SIG_DESC_SET(SCU80, 18));
+SIG_EXPR_DECL(GPIE2IN, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2IN, GPIE2, GPIE);
+MS_PIN_DECL(F18, GPIOE2, NDSR3, GPIE2IN);
+FUNC_GROUP_DECL(NDSR3, F18);
+
+
+#define F17 35
+SIG_EXPR_LIST_DECL_SINGLE(NRI3, NRI3, SIG_DESC_SET(SCU80, 19));
+SIG_EXPR_DECL(GPIE2OUT, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2OUT, GPIE2, GPIE);
+MS_PIN_DECL(F17, GPIOE3, NRI3, GPIE2OUT);
+FUNC_GROUP_DECL(NRI3, F17);
+
+FUNC_GROUP_DECL(GPIE2, F18, F17);
+
+#define GPIE4_DESC SIG_DESC_SET(SCU8C, 14)
+
+#define E18 36
+SIG_EXPR_LIST_DECL_SINGLE(NDTR3, NDTR3, SIG_DESC_SET(SCU80, 20));
+SIG_EXPR_DECL(GPIE4IN, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4IN, GPIE4, GPIE);
+MS_PIN_DECL(E18, GPIOE4, NDTR3, GPIE4IN);
+FUNC_GROUP_DECL(NDTR3, E18);
+
+#define D19 37
+SIG_EXPR_LIST_DECL_SINGLE(NRTS3, NRTS3, SIG_DESC_SET(SCU80, 21));
+SIG_EXPR_DECL(GPIE4OUT, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4OUT, GPIE4, GPIE);
+MS_PIN_DECL(D19, GPIOE5, NRTS3, GPIE4OUT);
+FUNC_GROUP_DECL(NRTS3, D19);
+
+FUNC_GROUP_DECL(GPIE4, E18, D19);
+
+#define GPIE6_DESC SIG_DESC_SET(SCU8C, 15)
+
+#define A20 38
+SIG_EXPR_LIST_DECL_SINGLE(TXD3, TXD3, SIG_DESC_SET(SCU80, 22));
+SIG_EXPR_DECL(GPIE6IN, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6IN, GPIE6, GPIE);
+MS_PIN_DECL(A20, GPIOE6, TXD3, GPIE6IN);
+FUNC_GROUP_DECL(TXD3, A20);
+
+#define B19 39
+SIG_EXPR_LIST_DECL_SINGLE(RXD3, RXD3, SIG_DESC_SET(SCU80, 23));
+SIG_EXPR_DECL(GPIE6OUT, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6OUT, GPIE6, GPIE);
+MS_PIN_DECL(B19, GPIOE7, RXD3, GPIE6OUT);
+FUNC_GROUP_DECL(RXD3, B19);
+
+FUNC_GROUP_DECL(GPIE6, A20, B19);
+
+#define LPCHC_DESC SIG_DESC_IP_SET(ASPEED_IP_LPC, LHCR0, 0)
+#define LPCPLUS_DESC SIG_DESC_SET(SCU90, 30)
+
+#define J19 40
+SIG_EXPR_DECL(LHAD0, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD0, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD0, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS4, NCTS4, SIG_DESC_SET(SCU80, 24));
+MS_PIN_DECL(J19, GPIOF0, LHAD0, NCTS4);
+FUNC_GROUP_DECL(NCTS4, J19);
+
+#define J18 41
+SIG_EXPR_DECL(LHAD1, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD1, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD1, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD4, NDCD4, SIG_DESC_SET(SCU80, 25));
+MS_PIN_DECL(J18, GPIOF1, LHAD1, NDCD4);
+FUNC_GROUP_DECL(NDCD4, J18);
+
+#define B22 42
+SIG_EXPR_DECL(LHAD2, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD2, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD2, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+MS_PIN_DECL(B22, GPIOF2, LHAD2, NDSR4);
+FUNC_GROUP_DECL(NDSR4, B22);
+
+#define B21 43
+SIG_EXPR_DECL(LHAD3, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD3, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD3, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
+MS_PIN_DECL(B21, GPIOF3, LHAD3, NRI4);
+FUNC_GROUP_DECL(NRI4, B21);
+
+#define A21 44
+SIG_EXPR_DECL(LHCLK, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHCLK, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHCLK, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR4, NDTR4, SIG_DESC_SET(SCU80, 28));
+MS_PIN_DECL(A21, GPIOF4, LHCLK, NDTR4);
+FUNC_GROUP_DECL(NDTR4, A21);
+
+#define H19 45
+SIG_EXPR_DECL(LHFRAME, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHFRAME, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHFRAME, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS4, NRTS4, SIG_DESC_SET(SCU80, 29));
+MS_PIN_DECL(H19, GPIOF5, LHFRAME, NRTS4);
+FUNC_GROUP_DECL(NRTS4, H19);
+
+#define G17 46
+SIG_EXPR_LIST_DECL_SINGLE(LHSIRQ, LPCHC, LPCHC_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD4, TXD4, SIG_DESC_SET(SCU80, 30));
+MS_PIN_DECL(G17, GPIOF6, LHSIRQ, TXD4);
+FUNC_GROUP_DECL(TXD4, G17);
+
+#define H18 47
+SIG_EXPR_DECL(LHRST, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHRST, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHRST, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(RXD4, RXD4, SIG_DESC_SET(SCU80, 31));
+MS_PIN_DECL(H18, GPIOF7, LHRST, RXD4);
+FUNC_GROUP_DECL(RXD4, H18);
+
+FUNC_GROUP_DECL(LPCHC, J19, J18, B22, B21, A21, H19, G17, H18);
+FUNC_GROUP_DECL(LPCPLUS, J19, J18, B22, B21, A21, H19, H18);
+
+#define A19 48
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1CK, SGPS1, COND1, SIG_DESC_SET(SCU84, 0));
+SS_PIN_DECL(A19, GPIOG0, SGPS1CK);
+
+#define E19 49
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1LD, SGPS1, COND1, SIG_DESC_SET(SCU84, 1));
+SS_PIN_DECL(E19, GPIOG1, SGPS1LD);
+
+#define C19 50
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I0, SGPS1, COND1, SIG_DESC_SET(SCU84, 2));
+SS_PIN_DECL(C19, GPIOG2, SGPS1I0);
+
+#define E16 51
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I1, SGPS1, COND1, SIG_DESC_SET(SCU84, 3));
+SS_PIN_DECL(E16, GPIOG3, SGPS1I1);
+
+FUNC_GROUP_DECL(SGPS1, A19, E19, C19, E16);
+
+#define SGPS2_DESC SIG_DESC_SET(SCU94, 12)
+
+#define E17 52
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2CK, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT1, SALT1, COND1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(E17, GPIOG4, SGPS2CK, SALT1);
+FUNC_GROUP_DECL(SALT1, E17);
+
+#define D16 53
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2LD, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT2, SALT2, COND1, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(D16, GPIOG5, SGPS2LD, SALT2);
+FUNC_GROUP_DECL(SALT2, D16);
+
+#define D15 54
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I0, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT3, SALT3, COND1, SIG_DESC_SET(SCU84, 6));
+MS_PIN_DECL(D15, GPIOG6, SGPS2I0, SALT3);
+FUNC_GROUP_DECL(SALT3, D15);
+
+#define E14 55
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I1, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT4, SALT4, COND1, SIG_DESC_SET(SCU84, 7));
+MS_PIN_DECL(E14, GPIOG7, SGPS2I1, SALT4);
+FUNC_GROUP_DECL(SALT4, E14);
+
+FUNC_GROUP_DECL(SGPS2, E17, D16, D15, E14);
+
+#define UART6_DESC SIG_DESC_SET(SCU90, 7)
+
+#define A18 56
+SIG_EXPR_LIST_DECL_SINGLE(DASHA18, DASHA18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A18, GPIOH0, DASHA18, NCTS6);
+
+#define B18 57
+SIG_EXPR_LIST_DECL_SINGLE(DASHB18, DASHB18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B18, GPIOH1, DASHB18, NDCD6);
+
+#define D17 58
+SIG_EXPR_LIST_DECL_SINGLE(DASHD17, DASHD17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(D17, GPIOH2, DASHD17, NDSR6);
+
+#define C17 59
+SIG_EXPR_LIST_DECL_SINGLE(DASHC17, DASHC17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NRI6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(C17, GPIOH3, DASHC17, NRI6);
+
+#define A17 60
+SIG_EXPR_LIST_DECL_SINGLE(DASHA17, DASHA17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A17, GPIOH4, DASHA17, NDTR6);
+
+#define B17 61
+SIG_EXPR_LIST_DECL_SINGLE(DASHB17, DASHB17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B17, GPIOH5, DASHB17, NRTS6);
+
+#define A16 62
+SIG_EXPR_LIST_DECL_SINGLE(TXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(A16, GPIOH6, TXD6);
+
+#define D18 63
+SIG_EXPR_LIST_DECL_SINGLE(RXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(D18, GPIOH7, RXD6);
+
+FUNC_GROUP_DECL(UART6, A18, B18, D17, C17, A17, B17, A16, D18);
+
#define SPI1_DESC \
{ ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
#define SPI1DEBUG_DESC \
@@ -281,6 +577,30 @@ SS_PIN_DECL(N3, GPIOJ2, SGPMO);
SIG_EXPR_LIST_DECL_SINGLE(SGPMI, SGPM, SIG_DESC_SET(SCU84, 11));
SS_PIN_DECL(N4, GPIOJ3, SGPMI);
+#define N5 76
+SIG_EXPR_LIST_DECL_SINGLE(VGAHS, VGAHS, SIG_DESC_SET(SCU84, 12));
+SIG_EXPR_LIST_DECL_SINGLE(DASHN5, DASHN5, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(N5, GPIOJ4, VGAHS, DASHN5);
+FUNC_GROUP_DECL(VGAHS, N5);
+
+#define R4 77
+SIG_EXPR_LIST_DECL_SINGLE(VGAVS, VGAVS, SIG_DESC_SET(SCU84, 13));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR4, DASHR4, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(R4, GPIOJ5, VGAVS, DASHR4);
+FUNC_GROUP_DECL(VGAVS, R4);
+
+#define R3 78
+SIG_EXPR_LIST_DECL_SINGLE(DDCCLK, DDCCLK, SIG_DESC_SET(SCU84, 14));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR3, DASHR3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(R3, GPIOJ6, DDCCLK, DASHR3);
+FUNC_GROUP_DECL(DDCCLK, R3);
+
+#define T3 79
+SIG_EXPR_LIST_DECL_SINGLE(DDCDAT, DDCDAT, SIG_DESC_SET(SCU84, 15));
+SIG_EXPR_LIST_DECL_SINGLE(DASHT3, DASHT3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(T3, GPIOJ7, DDCDAT, DASHT3);
+FUNC_GROUP_DECL(DDCDAT, T3);
+
#define I2C5_DESC SIG_DESC_SET(SCU90, 18)
#define L3 80
@@ -329,11 +649,119 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
FUNC_GROUP_DECL(I2C8, P2, R1);
+#define T2 88
+SSSF_PIN_DECL(T2, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
+
#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
+#define VPI_24_RSVD_DESC SIG_DESC_SET(SCU90, 5)
+#define T1 89
+#define T1_DESC SIG_DESC_SET(SCU84, 17)
+SIG_EXPR_LIST_DECL_SINGLE(VPIDE, VPI24, VPI_24_RSVD_DESC, T1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD1, NDCD1, T1_DESC, COND2);
+MS_PIN_DECL(T1, GPIOL1, VPIDE, NDCD1);
+FUNC_GROUP_DECL(NDCD1, T1);
+
+#define U1 90
+#define U1_DESC SIG_DESC_SET(SCU84, 18)
+SIG_EXPR_LIST_DECL_SINGLE(DASHU1, VPI24, VPI_24_RSVD_DESC, U1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR1, NDSR1, U1_DESC);
+MS_PIN_DECL(U1, GPIOL2, DASHU1, NDSR1);
+FUNC_GROUP_DECL(NDSR1, U1);
+
+#define U2 91
+#define U2_DESC SIG_DESC_SET(SCU84, 19)
+SIG_EXPR_LIST_DECL_SINGLE(VPIHS, VPI24, VPI_24_RSVD_DESC, U2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI1, NRI1, U2_DESC, COND2);
+MS_PIN_DECL(U2, GPIOL3, VPIHS, NRI1);
+FUNC_GROUP_DECL(NRI1, U2);
+
+#define P4 92
+#define P4_DESC SIG_DESC_SET(SCU84, 20)
+SIG_EXPR_LIST_DECL_SINGLE(VPIVS, VPI24, VPI_24_RSVD_DESC, P4_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR1, NDTR1, P4_DESC, COND2);
+MS_PIN_DECL(P4, GPIOL4, VPIVS, NDTR1);
+FUNC_GROUP_DECL(NDTR1, P4);
+
+#define P3 93
+#define P3_DESC SIG_DESC_SET(SCU84, 21)
+SIG_EXPR_LIST_DECL_SINGLE(VPICLK, VPI24, VPI_24_RSVD_DESC, P3_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS1, NRTS1, P3_DESC, COND2);
+MS_PIN_DECL(P3, GPIOL5, VPICLK, NRTS1);
+FUNC_GROUP_DECL(NRTS1, P3);
+
+#define V1 94
+#define V1_DESC SIG_DESC_SET(SCU84, 22)
+SIG_EXPR_LIST_DECL_SINGLE(DASHV1, DASHV1, VPIRSVD_DESC, V1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD1, TXD1, V1_DESC, COND2);
+MS_PIN_DECL(V1, GPIOL6, DASHV1, TXD1);
+FUNC_GROUP_DECL(TXD1, V1);
+
+#define W1 95
+#define W1_DESC SIG_DESC_SET(SCU84, 23)
+SIG_EXPR_LIST_DECL_SINGLE(DASHW1, DASHW1, VPIRSVD_DESC, W1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, W1_DESC, COND2);
+MS_PIN_DECL(W1, GPIOL7, DASHW1, RXD1);
+FUNC_GROUP_DECL(RXD1, W1);
+
+#define Y1 96
+#define Y1_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB2, VPI24, VPI_24_RSVD_DESC, Y1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, Y1_DESC, COND2);
+MS_PIN_DECL(Y1, GPIOM0, VPIB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, Y1);
+
+#define AB2 97
+#define AB2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB3, VPI24, VPI_24_RSVD_DESC, AB2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, AB2_DESC, COND2);
+MS_PIN_DECL(AB2, GPIOM1, VPIB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, AB2);
+
+#define AA1 98
+#define AA1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB4, VPI24, VPI_24_RSVD_DESC, AA1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, AA1_DESC, COND2);
+MS_PIN_DECL(AA1, GPIOM2, VPIB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, AA1);
+
+#define Y2 99
+#define Y2_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB5, VPI24, VPI_24_RSVD_DESC, Y2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, Y2_DESC, COND2);
+MS_PIN_DECL(Y2, GPIOM3, VPIB5, NRI2);
+FUNC_GROUP_DECL(NRI2, Y2);
+
+#define AA2 100
+#define AA2_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB6, VPI24, VPI_24_RSVD_DESC, AA2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, AA2_DESC, COND2);
+MS_PIN_DECL(AA2, GPIOM4, VPIB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, AA2);
+
+#define P5 101
+#define P5_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB7, VPI24, VPI_24_RSVD_DESC, P5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, P5_DESC, COND2);
+MS_PIN_DECL(P5, GPIOM5, VPIB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, P5);
+
+#define R5 102
+#define R5_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB8, VPI24, VPI_24_RSVD_DESC, R5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, R5_DESC, COND2);
+MS_PIN_DECL(R5, GPIOM6, VPIB8, TXD2);
+FUNC_GROUP_DECL(TXD2, R5);
+
+#define T5 103
+#define T5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB9, VPI24, VPI_24_RSVD_DESC, T5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, T5_DESC, COND2);
+MS_PIN_DECL(T5, GPIOM7, VPIB9, RXD2);
+FUNC_GROUP_DECL(RXD2, T5);
#define V2 104
#define V2_DESC SIG_DESC_SET(SCU88, 0)
@@ -399,9 +827,88 @@ SIG_EXPR_LIST_DECL_SINGLE(PWM7, PWM7, T4_DESC, COND2);
MS_PIN_DECL(T4, GPION7, VPIG7, PWM7);
FUNC_GROUP_DECL(PWM7, T4);
+#define U5 112
+SIG_EXPR_LIST_DECL_SINGLE(VPIG8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 8),
+ COND2);
+SS_PIN_DECL(U5, GPIOO0, VPIG8);
+
+#define U4 113
+SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9),
+ COND2);
+SS_PIN_DECL(U4, GPIOO1, VPIG9);
+
+#define V5 114
+SIG_EXPR_LIST_DECL_SINGLE(DASHV5, DASHV5, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(V5, GPIOO2, DASHV5);
+
+#define AB4 115
+SIG_EXPR_LIST_DECL_SINGLE(DASHAB4, DASHAB4, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB4, GPIOO3, DASHAB4);
+
+#define AB3 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12),
+ COND2);
+SS_PIN_DECL(AB3, GPIOO4, VPIR2);
+
+#define Y4 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13),
+ COND2);
+SS_PIN_DECL(Y4, GPIOO5, VPIR3);
+
+#define AA4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14),
+ COND2);
+SS_PIN_DECL(AA4, GPIOO6, VPIR4);
+
+#define W4 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15),
+ COND2);
+SS_PIN_DECL(W4, GPIOO7, VPIR5);
+
+#define V4 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16),
+ COND2);
+SS_PIN_DECL(V4, GPIOP0, VPIR6);
+
+#define W5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17),
+ COND2);
+SS_PIN_DECL(W5, GPIOP1, VPIR7);
+
+#define AA5 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18),
+ COND2);
+SS_PIN_DECL(AA5, GPIOP2, VPIR8);
+
+#define AB5 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19),
+ COND2);
+SS_PIN_DECL(AB5, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI24, T1, U2, P4, P3, Y1, AB2, AA1, Y2, AA2, P5, R5, T5, V3,
+ U3, W3, AA3, Y3, T4, U5, U4, AB3, Y4, AA4, W4, V4, W5, AA5,
+ AB5);
+
+#define Y6 124
+SIG_EXPR_LIST_DECL_SINGLE(DASHY6, DASHY6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 20));
+SS_PIN_DECL(Y6, GPIOP4, DASHY6);
+
+#define Y5 125
+SIG_EXPR_LIST_DECL_SINGLE(DASHY5, DASHY5, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 21));
+SS_PIN_DECL(Y5, GPIOP5, DASHY5);
+
+#define W6 126
+SIG_EXPR_LIST_DECL_SINGLE(DASHW6, DASHW6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 22));
+SS_PIN_DECL(W6, GPIOP6, DASHW6);
+
#define V6 127
SIG_EXPR_LIST_DECL_SINGLE(DASHV6, DASHV6, SIG_DESC_SET(SCU90, 28),
- SIG_DESC_SET(SCU88, 23));
+ SIG_DESC_SET(SCU88, 23));
SS_PIN_DECL(V6, GPIOP7, DASHV6);
#define I2C3_DESC SIG_DESC_SET(SCU90, 16)
@@ -446,6 +953,24 @@ SSSF_PIN_DECL(B10, GPIOQ6, OSCCLK, SIG_DESC_SET(SCU2C, 1));
#define N20 135
SSSF_PIN_DECL(N20, GPIOQ7, PEWAKE, SIG_DESC_SET(SCU2C, 29));
+#define AA19 136
+SSSF_PIN_DECL(AA19, GPIOR0, FWSPICS1, SIG_DESC_SET(SCU88, 24), COND2);
+
+#define T19 137
+SSSF_PIN_DECL(T19, GPIOR1, FWSPICS2, SIG_DESC_SET(SCU88, 25), COND2);
+
+#define T17 138
+SSSF_PIN_DECL(T17, GPIOR2, SPI2CS0, SIG_DESC_SET(SCU88, 26), COND2);
+
+#define Y19 139
+SSSF_PIN_DECL(Y19, GPIOR3, SPI2CK, SIG_DESC_SET(SCU88, 27), COND2);
+
+#define W19 140
+SSSF_PIN_DECL(W19, GPIOR4, SPI2MOSI, SIG_DESC_SET(SCU88, 28), COND2);
+
+#define V19 141
+SSSF_PIN_DECL(V19, GPIOR5, SPI2MISO, SIG_DESC_SET(SCU88, 29), COND2);
+
#define D8 142
SIG_EXPR_LIST_DECL_SINGLE(MDC1, MDIO1, SIG_DESC_SET(SCU88, 30));
SS_PIN_DECL(D8, GPIOR6, MDC1);
@@ -456,6 +981,93 @@ SS_PIN_DECL(E10, GPIOR7, MDIO1);
FUNC_GROUP_DECL(MDIO1, D8, E10);
+#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define VPO_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
+#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
+#define VPOOFF2_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
+
+#define CRT_DVO_EN_DESC SIG_DESC_IP_SET(ASPEED_IP_GFX, GFX064, 7)
+
+#define V20 144
+#define V20_DESC SIG_DESC_SET(SCU8C, 0)
+SIG_EXPR_DECL(VPOB2, VPO, V20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, V20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF2, V20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO),
+ SIG_EXPR_PTR(VPOB2, VPOOFF1), SIG_EXPR_PTR(VPOB2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SPI2CS1, SPI2CS1, V20_DESC);
+MS_PIN_DECL(V20, GPIOS0, VPOB2, SPI2CS1);
+FUNC_GROUP_DECL(SPI2CS1, V20);
+
+#define U19 145
+#define U19_DESC SIG_DESC_SET(SCU8C, 1)
+SIG_EXPR_DECL(VPOB3, VPO, U19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, U19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF2, U19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO),
+ SIG_EXPR_PTR(VPOB3, VPOOFF1), SIG_EXPR_PTR(VPOB3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(BMCINT, BMCINT, U19_DESC);
+MS_PIN_DECL(U19, GPIOS1, VPOB3, BMCINT);
+FUNC_GROUP_DECL(BMCINT, U19);
+
+#define R18 146
+#define R18_DESC SIG_DESC_SET(SCU8C, 2)
+SIG_EXPR_DECL(VPOB4, VPO, R18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, R18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF2, R18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO),
+ SIG_EXPR_PTR(VPOB4, VPOOFF1), SIG_EXPR_PTR(VPOB4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT5, SALT5, R18_DESC);
+MS_PIN_DECL(R18, GPIOS2, VPOB4, SALT5);
+FUNC_GROUP_DECL(SALT5, R18);
+
+#define P18 147
+#define P18_DESC SIG_DESC_SET(SCU8C, 3)
+SIG_EXPR_DECL(VPOB5, VPO, P18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF2, P18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO),
+ SIG_EXPR_PTR(VPOB5, VPOOFF1), SIG_EXPR_PTR(VPOB5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT6, SALT6, P18_DESC);
+MS_PIN_DECL(P18, GPIOS3, VPOB5, SALT6);
+FUNC_GROUP_DECL(SALT6, P18);
+
+#define R19 148
+#define R19_DESC SIG_DESC_SET(SCU8C, 4)
+SIG_EXPR_DECL(VPOB6, VPO, R19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, R19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF2, R19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO),
+ SIG_EXPR_PTR(VPOB6, VPOOFF1), SIG_EXPR_PTR(VPOB6, VPOOFF2));
+SS_PIN_DECL(R19, GPIOS4, VPOB6);
+
+#define W20 149
+#define W20_DESC SIG_DESC_SET(SCU8C, 5)
+SIG_EXPR_DECL(VPOB7, VPO, W20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, W20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF2, W20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO),
+ SIG_EXPR_PTR(VPOB7, VPOOFF1), SIG_EXPR_PTR(VPOB7, VPOOFF2));
+SS_PIN_DECL(W20, GPIOS5, VPOB7);
+
+#define U20 150
+#define U20_DESC SIG_DESC_SET(SCU8C, 6)
+SIG_EXPR_DECL(VPOB8, VPO, U20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF1, U20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF2, U20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB8, SIG_EXPR_PTR(VPOB8, VPO),
+ SIG_EXPR_PTR(VPOB8, VPOOFF1), SIG_EXPR_PTR(VPOB8, VPOOFF2));
+SS_PIN_DECL(U20, GPIOS6, VPOB8);
+
+#define AA20 151
+#define AA20_DESC SIG_DESC_SET(SCU8C, 7)
+SIG_EXPR_DECL(VPOB9, VPO, AA20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF1, AA20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF2, AA20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB9, SIG_EXPR_PTR(VPOB9, VPO),
+ SIG_EXPR_PTR(VPOB9, VPOOFF1), SIG_EXPR_PTR(VPOB9, VPOOFF2));
+SS_PIN_DECL(AA20, GPIOS7, VPOB9);
+
/* RGMII1/RMII1 */
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
@@ -637,6 +1249,481 @@ MS_PIN_DECL_(E6, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
FUNC_GROUP_DECL(RGMII2, B2, B1, A2, B3, D5, D4, C2, C1, C3, D1, D2, E6);
FUNC_GROUP_DECL(RMII2, B2, B1, A2, B3, C2, C3, D1, D2, E6);
+#define F4 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(F4, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, F4);
+
+#define F5 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(F5, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, F5);
+
+#define E2 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(E2, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, E2);
+
+#define E1 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(E1, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, E1);
+
+#define F3 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(F3, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, F3);
+
+#define E3 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(E3, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, E3);
+
+#define G5 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(G5, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, G5);
+
+#define G4 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(G4, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, G4);
+
+#define F2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(F2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, F2);
+
+#define G3 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(G3, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, G3);
+
+#define G2 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(G2, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, G2);
+
+#define F1 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(F1, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, F1);
+
+#define H5 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(H5, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, H5);
+
+#define G1 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(G1, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, G1);
+
+#define H3 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(H3, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, H3);
+
+#define H4 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(H4, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, H4);
+
+#define ACPI_DESC SIG_DESC_SET(HW_STRAP1, 19)
+
+#define R22 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR22, DASHR22, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R22, GPIOY0, SIOS3, DASHR22);
+FUNC_GROUP_DECL(SIOS3, R22);
+
+#define R21 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR21, DASHR21, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R21, GPIOY1, SIOS5, DASHR21);
+FUNC_GROUP_DECL(SIOS5, R21);
+
+#define P22 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP22, DASHP22, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P22, GPIOY2, SIOPWREQ, DASHP22);
+FUNC_GROUP_DECL(SIOPWREQ, P22);
+
+#define P21 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP21, DASHP21, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P21, GPIOY3, SIOONCTRL, DASHP21);
+FUNC_GROUP_DECL(SIOONCTRL, P21);
+
+#define M18 196
+SSSF_PIN_DECL(M18, GPIOY4, SCL1, SIG_DESC_SET(SCUA4, 12));
+
+#define M19 197
+SSSF_PIN_DECL(M19, GPIOY5, SDA1, SIG_DESC_SET(SCUA4, 13));
+
+#define M20 198
+SSSF_PIN_DECL(M20, GPIOY6, SCL2, SIG_DESC_SET(SCUA4, 14));
+
+#define P20 199
+SSSF_PIN_DECL(P20, GPIOY7, SDA2, SIG_DESC_SET(SCUA4, 15));
+
+#define PNOR_DESC SIG_DESC_SET(SCU90, 31)
+
+#define Y20 200
+#define Y20_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(VPOG2, VPO, Y20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, Y20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF2, Y20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO),
+ SIG_EXPR_PTR(VPOG2, VPOOFF1), SIG_EXPR_PTR(VPOG2, VPOOFF2));
+SIG_EXPR_DECL(SIOPBI, SIOPBI, Y20_DESC);
+SIG_EXPR_DECL(SIOPBI, ACPI, Y20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBI, SIOPBI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ0, GPIOZ0);
+MS_PIN_DECL_(Y20, SIG_EXPR_LIST_PTR(VPOG2), SIG_EXPR_LIST_PTR(SIOPBI),
+ SIG_EXPR_LIST_PTR(NORA0), SIG_EXPR_LIST_PTR(GPIOZ0));
+FUNC_GROUP_DECL(SIOPBI, Y20);
+
+#define AB20 201
+#define AB20_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(VPOG3, VPO, AB20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, AB20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF2, AB20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO),
+ SIG_EXPR_PTR(VPOG3, VPOOFF1), SIG_EXPR_PTR(VPOG3, VPOOFF2));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, AB20_DESC);
+SIG_EXPR_DECL(SIOPWRGD, ACPI, AB20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ1, GPIOZ1);
+MS_PIN_DECL_(AB20, SIG_EXPR_LIST_PTR(VPOG3), SIG_EXPR_LIST_PTR(SIOPWRGD),
+ SIG_EXPR_LIST_PTR(NORA1), SIG_EXPR_LIST_PTR(GPIOZ1));
+FUNC_GROUP_DECL(SIOPWRGD, AB20);
+
+#define AB21 202
+#define AB21_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(VPOG4, VPO, AB21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, AB21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF2, AB21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG4, SIG_EXPR_PTR(VPOG4, VPO),
+ SIG_EXPR_PTR(VPOG4, VPOOFF1), SIG_EXPR_PTR(VPOG4, VPOOFF2));
+SIG_EXPR_DECL(SIOPBO, SIOPBO, AB21_DESC);
+SIG_EXPR_DECL(SIOPBO, ACPI, AB21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBO, SIOPBO, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ2, GPIOZ2);
+MS_PIN_DECL_(AB21, SIG_EXPR_LIST_PTR(VPOG4), SIG_EXPR_LIST_PTR(SIOPBO),
+ SIG_EXPR_LIST_PTR(NORA2), SIG_EXPR_LIST_PTR(GPIOZ2));
+FUNC_GROUP_DECL(SIOPBO, AB21);
+
+#define AA21 203
+#define AA21_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(VPOG5, VPO, AA21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, AA21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF2, AA21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG5, SIG_EXPR_PTR(VPOG5, VPO),
+ SIG_EXPR_PTR(VPOG5, VPOOFF1), SIG_EXPR_PTR(VPOG5, VPOOFF2));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, AA21_DESC);
+SIG_EXPR_DECL(SIOSCI, ACPI, AA21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ3, GPIOZ3);
+MS_PIN_DECL_(AA21, SIG_EXPR_LIST_PTR(VPOG5), SIG_EXPR_LIST_PTR(SIOSCI),
+ SIG_EXPR_LIST_PTR(NORA3), SIG_EXPR_LIST_PTR(GPIOZ3));
+FUNC_GROUP_DECL(SIOSCI, AA21);
+
+FUNC_GROUP_DECL(ACPI, R22, R21, P22, P21, Y20, AB20, AB21, AA21);
+
+/* CRT DVO disabled, configured for single-edge mode */
+#define CRT_DVO_DS_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 0, 0 }
+
+/* CRT DVO disabled, configured for dual-edge mode */
+#define CRT_DVO_DD_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 1, 1 }
+
+/* CRT DVO enabled, configured for single-edge mode */
+#define CRT_DVO_ES_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 2, 2 }
+
+/* CRT DVO enabled, configured for dual-edge mode */
+#define CRT_DVO_ED_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 3, 3 }
+
+#define U21 204
+#define U21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(VPOG6, VPO, U21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, U21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF2, U21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG6, SIG_EXPR_PTR(VPOG6, VPO),
+ SIG_EXPR_PTR(VPOG6, VPOOFF1), SIG_EXPR_PTR(VPOG6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA4, PNOR, PNOR_DESC);
+MS_PIN_DECL(U21, GPIOZ4, VPOG6, NORA4);
+
+#define W22 205
+#define W22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(VPOG7, VPO, W22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, W22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF2, W22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG7, SIG_EXPR_PTR(VPOG7, VPO),
+ SIG_EXPR_PTR(VPOG7, VPOOFF1), SIG_EXPR_PTR(VPOG7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA5, PNOR, PNOR_DESC);
+MS_PIN_DECL(W22, GPIOZ5, VPOG7, NORA5);
+
+#define V22 206
+#define V22_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(VPOG8, VPO, V22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF1, V22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF2, V22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG8, SIG_EXPR_PTR(VPOG8, VPO),
+ SIG_EXPR_PTR(VPOG8, VPOOFF1), SIG_EXPR_PTR(VPOG8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA6, PNOR, PNOR_DESC);
+MS_PIN_DECL(V22, GPIOZ6, VPOG8, NORA6);
+
+#define W21 207
+#define W21_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(VPOG9, VPO, W21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF1, W21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF2, W21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG9, SIG_EXPR_PTR(VPOG9, VPO),
+ SIG_EXPR_PTR(VPOG9, VPOOFF1), SIG_EXPR_PTR(VPOG9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA7, PNOR, PNOR_DESC);
+MS_PIN_DECL(W21, GPIOZ7, VPOG9, NORA7);
+
+#define Y21 208
+#define Y21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(VPOR2, VPO, Y21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, Y21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF2, Y21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR2, SIG_EXPR_PTR(VPOR2, VPO),
+ SIG_EXPR_PTR(VPOR2, VPOOFF1), SIG_EXPR_PTR(VPOR2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT7, SALT7, Y21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA0, GPIOAA0);
+MS_PIN_DECL_(Y21, SIG_EXPR_LIST_PTR(VPOR2), SIG_EXPR_LIST_PTR(SALT7),
+ SIG_EXPR_LIST_PTR(NORD0), SIG_EXPR_LIST_PTR(GPIOAA0));
+FUNC_GROUP_DECL(SALT7, Y21);
+
+#define V21 209
+#define V21_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(VPOR3, VPO, V21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, V21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF2, V21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR3, SIG_EXPR_PTR(VPOR3, VPO),
+ SIG_EXPR_PTR(VPOR3, VPOOFF1), SIG_EXPR_PTR(VPOR3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT8, SALT8, V21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA1, GPIOAA1);
+MS_PIN_DECL_(V21, SIG_EXPR_LIST_PTR(VPOR3), SIG_EXPR_LIST_PTR(SALT8),
+ SIG_EXPR_LIST_PTR(NORD1), SIG_EXPR_LIST_PTR(GPIOAA1));
+FUNC_GROUP_DECL(SALT8, V21);
+
+#define Y22 210
+#define Y22_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(VPOR4, VPO, Y22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF1, Y22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF2, Y22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR4, SIG_EXPR_PTR(VPOR4, VPO),
+ SIG_EXPR_PTR(VPOR4, VPOOFF1), SIG_EXPR_PTR(VPOR4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT9, SALT9, Y22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA2, GPIOAA2);
+MS_PIN_DECL_(Y22, SIG_EXPR_LIST_PTR(VPOR4), SIG_EXPR_LIST_PTR(SALT9),
+ SIG_EXPR_LIST_PTR(NORD2), SIG_EXPR_LIST_PTR(GPIOAA2));
+FUNC_GROUP_DECL(SALT9, Y22);
+
+#define AA22 211
+#define AA22_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(VPOR5, VPO, AA22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF1, AA22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF2, AA22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR5, SIG_EXPR_PTR(VPOR5, VPO),
+ SIG_EXPR_PTR(VPOR5, VPOOFF1), SIG_EXPR_PTR(VPOR5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT10, SALT10, AA22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA3, GPIOAA3);
+MS_PIN_DECL_(AA22, SIG_EXPR_LIST_PTR(VPOR5), SIG_EXPR_LIST_PTR(SALT10),
+ SIG_EXPR_LIST_PTR(NORD3), SIG_EXPR_LIST_PTR(GPIOAA3));
+FUNC_GROUP_DECL(SALT10, AA22);
+
+#define U22 212
+#define U22_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(VPOR6, VPO, U22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF1, U22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF2, U22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR6, SIG_EXPR_PTR(VPOR6, VPO),
+ SIG_EXPR_PTR(VPOR6, VPOOFF1), SIG_EXPR_PTR(VPOR6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT11, SALT11, U22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD4, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA4, GPIOAA4);
+MS_PIN_DECL_(U22, SIG_EXPR_LIST_PTR(VPOR6), SIG_EXPR_LIST_PTR(SALT11),
+ SIG_EXPR_LIST_PTR(NORD4), SIG_EXPR_LIST_PTR(GPIOAA4));
+FUNC_GROUP_DECL(SALT11, U22);
+
+#define T20 213
+#define T20_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(VPOR7, VPO, T20_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF1, T20_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF2, T20_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR7, SIG_EXPR_PTR(VPOR7, VPO),
+ SIG_EXPR_PTR(VPOR7, VPOOFF1), SIG_EXPR_PTR(VPOR7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT12, SALT12, T20_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD5, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA5, GPIOAA5);
+MS_PIN_DECL_(T20, SIG_EXPR_LIST_PTR(VPOR7), SIG_EXPR_LIST_PTR(SALT12),
+ SIG_EXPR_LIST_PTR(NORD5), SIG_EXPR_LIST_PTR(GPIOAA5));
+FUNC_GROUP_DECL(SALT12, T20);
+
+#define N18 214
+#define N18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(VPOR8, VPO, N18_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF1, N18_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF2, N18_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR8, SIG_EXPR_PTR(VPOR8, VPO),
+ SIG_EXPR_PTR(VPOR8, VPOOFF1), SIG_EXPR_PTR(VPOR8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT13, SALT13, N18_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD6, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA6, GPIOAA6);
+MS_PIN_DECL_(N18, SIG_EXPR_LIST_PTR(VPOR8), SIG_EXPR_LIST_PTR(SALT13),
+ SIG_EXPR_LIST_PTR(NORD6), SIG_EXPR_LIST_PTR(GPIOAA6));
+FUNC_GROUP_DECL(SALT13, N18);
+
+#define P19 215
+#define P19_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(VPOR9, VPO, P19_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF1, P19_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF2, P19_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR9, SIG_EXPR_PTR(VPOR9, VPO),
+ SIG_EXPR_PTR(VPOR9, VPOOFF1), SIG_EXPR_PTR(VPOR9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT14, SALT14, P19_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD7, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA7, GPIOAA7);
+MS_PIN_DECL_(P19, SIG_EXPR_LIST_PTR(VPOR9), SIG_EXPR_LIST_PTR(SALT14),
+ SIG_EXPR_LIST_PTR(NORD7), SIG_EXPR_LIST_PTR(GPIOAA7));
+FUNC_GROUP_DECL(SALT14, P19);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(VPODE, VPO, N19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF1, N19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF2, N19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPODE, SIG_EXPR_PTR(VPODE, VPO),
+ SIG_EXPR_PTR(VPODE, VPOOFF1), SIG_EXPR_PTR(VPODE, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NOROE, PNOR, PNOR_DESC);
+MS_PIN_DECL(N19, GPIOAB0, VPODE, NOROE);
+
+#define T21 217
+#define T21_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(VPOHS, VPO, T21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF1, T21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF2, T21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOHS, SIG_EXPR_PTR(VPOHS, VPO),
+ SIG_EXPR_PTR(VPOHS, VPOOFF1), SIG_EXPR_PTR(VPOHS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORWE, PNOR, PNOR_DESC);
+MS_PIN_DECL(T21, GPIOAB1, VPOHS, NORWE);
+
+FUNC_GROUP_DECL(PNOR, Y20, AB20, AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22,
+ AA22, U22, T20, N18, P19, N19, T21);
+
+#define T22 218
+#define T22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(VPOVS, VPO, T22_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF1, T22_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF2, T22_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOVS, SIG_EXPR_PTR(VPOVS, VPO),
+ SIG_EXPR_PTR(VPOVS, VPOOFF1), SIG_EXPR_PTR(VPOVS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, T22_DESC);
+MS_PIN_DECL(T22, GPIOAB2, VPOVS, WDTRST1);
+FUNC_GROUP_DECL(WDTRST1, T22);
+
+#define R20 219
+#define R20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(VPOCLK, VPO, R20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF1, R20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF2, R20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOCLK, SIG_EXPR_PTR(VPOCLK, VPO),
+ SIG_EXPR_PTR(VPOCLK, VPOOFF1), SIG_EXPR_PTR(VPOCLK, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, R20_DESC);
+MS_PIN_DECL(R20, GPIOAB3, VPOCLK, WDTRST2);
+FUNC_GROUP_DECL(WDTRST2, R20);
+
+FUNC_GROUP_DECL(VPO, V20, U19, R18, P18, R19, W20, U20, AA20, Y20, AB20,
+ AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22, AA22, U22, T20,
+ N18, P19, N19, T21, T22, R20);
+
+#define ESPI_DESC SIG_DESC_SET(HW_STRAP1, 25)
+
+#define G21 224
+SIG_EXPR_LIST_DECL_SINGLE(ESPID0, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD0, LAD0, SIG_DESC_SET(SCUAC, 0));
+MS_PIN_DECL(G21, GPIOAC0, ESPID0, LAD0);
+FUNC_GROUP_DECL(LAD0, G21);
+
+#define G20 225
+SIG_EXPR_LIST_DECL_SINGLE(ESPID1, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD1, LAD1, SIG_DESC_SET(SCUAC, 1));
+MS_PIN_DECL(G20, GPIOAC1, ESPID1, LAD1);
+FUNC_GROUP_DECL(LAD1, G20);
+
+#define D22 226
+SIG_EXPR_LIST_DECL_SINGLE(ESPID2, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD2, LAD2, SIG_DESC_SET(SCUAC, 2));
+MS_PIN_DECL(D22, GPIOAC2, ESPID2, LAD2);
+FUNC_GROUP_DECL(LAD2, D22);
+
+#define E22 227
+SIG_EXPR_LIST_DECL_SINGLE(ESPID3, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD3, LAD3, SIG_DESC_SET(SCUAC, 3));
+MS_PIN_DECL(E22, GPIOAC3, ESPID3, LAD3);
+FUNC_GROUP_DECL(LAD3, E22);
+
+#define C22 228
+SIG_EXPR_LIST_DECL_SINGLE(ESPICK, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LCLK, LCLK, SIG_DESC_SET(SCUAC, 4));
+MS_PIN_DECL(C22, GPIOAC4, ESPICK, LCLK);
+FUNC_GROUP_DECL(LCLK, C22);
+
+#define F21 229
+SIG_EXPR_LIST_DECL_SINGLE(ESPICS, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LFRAME, LFRAME, SIG_DESC_SET(SCUAC, 5));
+MS_PIN_DECL(F21, GPIOAC5, ESPICS, LFRAME);
+FUNC_GROUP_DECL(LFRAME, F21);
+
+#define F22 230
+SIG_EXPR_LIST_DECL_SINGLE(ESPIALT, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LSIRQ, LSIRQ, SIG_DESC_SET(SCUAC, 6));
+MS_PIN_DECL(F22, GPIOAC6, ESPIALT, LSIRQ);
+FUNC_GROUP_DECL(LSIRQ, F22);
+
+#define G22 231
+SIG_EXPR_LIST_DECL_SINGLE(ESPIRST, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCRST, LPCRST, SIG_DESC_SET(SCUAC, 7));
+MS_PIN_DECL(G22, GPIOAC7, ESPIRST, LPCRST);
+FUNC_GROUP_DECL(LPCRST, G22);
+
+FUNC_GROUP_DECL(ESPI, G21, G20, D22, E22, C22, F21, F22, G22);
+
/* Pins, groups and functions are sort(1):ed alphabetically for sanity */
static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
@@ -646,12 +1733,32 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(A13),
ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
+ ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
+ ASPEED_PINCTRL_PIN(A21),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
+ ASPEED_PINCTRL_PIN(AA19),
+ ASPEED_PINCTRL_PIN(AA2),
+ ASPEED_PINCTRL_PIN(AA20),
+ ASPEED_PINCTRL_PIN(AA21),
+ ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB20),
+ ASPEED_PINCTRL_PIN(AB21),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
ASPEED_PINCTRL_PIN(B1),
ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
@@ -660,8 +1767,13 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
+ ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
ASPEED_PINCTRL_PIN(B20),
+ ASPEED_PINCTRL_PIN(B21),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
ASPEED_PINCTRL_PIN(B5),
@@ -673,62 +1785,210 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
ASPEED_PINCTRL_PIN(C16),
+ ASPEED_PINCTRL_PIN(C17),
ASPEED_PINCTRL_PIN(C18),
+ ASPEED_PINCTRL_PIN(C19),
ASPEED_PINCTRL_PIN(C2),
ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(D1),
ASPEED_PINCTRL_PIN(D10),
+ ASPEED_PINCTRL_PIN(D13),
+ ASPEED_PINCTRL_PIN(D14),
+ ASPEED_PINCTRL_PIN(D15),
+ ASPEED_PINCTRL_PIN(D16),
+ ASPEED_PINCTRL_PIN(D17),
+ ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D20),
+ ASPEED_PINCTRL_PIN(D21),
+ ASPEED_PINCTRL_PIN(D22),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
ASPEED_PINCTRL_PIN(D8),
ASPEED_PINCTRL_PIN(D9),
+ ASPEED_PINCTRL_PIN(E1),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E12),
ASPEED_PINCTRL_PIN(E13),
+ ASPEED_PINCTRL_PIN(E14),
ASPEED_PINCTRL_PIN(E15),
+ ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E17),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
+ ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E21),
+ ASPEED_PINCTRL_PIN(E22),
+ ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F1),
+ ASPEED_PINCTRL_PIN(F17),
+ ASPEED_PINCTRL_PIN(F18),
ASPEED_PINCTRL_PIN(F19),
+ ASPEED_PINCTRL_PIN(F2),
ASPEED_PINCTRL_PIN(F20),
+ ASPEED_PINCTRL_PIN(F21),
+ ASPEED_PINCTRL_PIN(F22),
+ ASPEED_PINCTRL_PIN(F3),
+ ASPEED_PINCTRL_PIN(F4),
+ ASPEED_PINCTRL_PIN(F5),
ASPEED_PINCTRL_PIN(F9),
+ ASPEED_PINCTRL_PIN(G1),
+ ASPEED_PINCTRL_PIN(G17),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G2),
+ ASPEED_PINCTRL_PIN(G20),
+ ASPEED_PINCTRL_PIN(G21),
+ ASPEED_PINCTRL_PIN(G22),
+ ASPEED_PINCTRL_PIN(G3),
+ ASPEED_PINCTRL_PIN(G4),
+ ASPEED_PINCTRL_PIN(G5),
+ ASPEED_PINCTRL_PIN(H18),
+ ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H21),
+ ASPEED_PINCTRL_PIN(H22),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(H5),
+ ASPEED_PINCTRL_PIN(J18),
+ ASPEED_PINCTRL_PIN(J19),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K19),
ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
ASPEED_PINCTRL_PIN(L2),
ASPEED_PINCTRL_PIN(L3),
ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M20),
ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
ASPEED_PINCTRL_PIN(N2),
ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
ASPEED_PINCTRL_PIN(N22),
ASPEED_PINCTRL_PIN(N3),
ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
ASPEED_PINCTRL_PIN(P1),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
ASPEED_PINCTRL_PIN(P2),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P3),
+ ASPEED_PINCTRL_PIN(P4),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R1),
+ ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R19),
+ ASPEED_PINCTRL_PIN(R2),
+ ASPEED_PINCTRL_PIN(R20),
+ ASPEED_PINCTRL_PIN(R21),
+ ASPEED_PINCTRL_PIN(R22),
+ ASPEED_PINCTRL_PIN(R3),
+ ASPEED_PINCTRL_PIN(R4),
+ ASPEED_PINCTRL_PIN(R5),
+ ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T17),
+ ASPEED_PINCTRL_PIN(T19),
+ ASPEED_PINCTRL_PIN(T2),
+ ASPEED_PINCTRL_PIN(T20),
+ ASPEED_PINCTRL_PIN(T21),
+ ASPEED_PINCTRL_PIN(T22),
+ ASPEED_PINCTRL_PIN(T3),
ASPEED_PINCTRL_PIN(T4),
+ ASPEED_PINCTRL_PIN(T5),
+ ASPEED_PINCTRL_PIN(U1),
+ ASPEED_PINCTRL_PIN(U19),
+ ASPEED_PINCTRL_PIN(U2),
+ ASPEED_PINCTRL_PIN(U20),
+ ASPEED_PINCTRL_PIN(U21),
+ ASPEED_PINCTRL_PIN(U22),
ASPEED_PINCTRL_PIN(U3),
+ ASPEED_PINCTRL_PIN(U4),
+ ASPEED_PINCTRL_PIN(U5),
+ ASPEED_PINCTRL_PIN(V1),
+ ASPEED_PINCTRL_PIN(V19),
ASPEED_PINCTRL_PIN(V2),
+ ASPEED_PINCTRL_PIN(V20),
+ ASPEED_PINCTRL_PIN(V21),
+ ASPEED_PINCTRL_PIN(V22),
ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W19),
ASPEED_PINCTRL_PIN(W2),
+ ASPEED_PINCTRL_PIN(W20),
+ ASPEED_PINCTRL_PIN(W21),
+ ASPEED_PINCTRL_PIN(W22),
ASPEED_PINCTRL_PIN(W3),
+ ASPEED_PINCTRL_PIN(W4),
+ ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y19),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y20),
+ ASPEED_PINCTRL_PIN(Y21),
+ ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
+ ASPEED_PINCTRL_PIN(Y4),
+ ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
};
static const struct aspeed_pin_group aspeed_g5_groups[] = {
+ ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
+ ASPEED_PINCTRL_GROUP(BMCINT),
+ ASPEED_PINCTRL_GROUP(DDCCLK),
+ ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(ESPI),
+ ASPEED_PINCTRL_GROUP(FWSPICS1),
+ ASPEED_PINCTRL_GROUP(FWSPICS2),
ASPEED_PINCTRL_GROUP(GPID0),
ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
+ ASPEED_PINCTRL_GROUP(GPIE2),
+ ASPEED_PINCTRL_GROUP(GPIE4),
+ ASPEED_PINCTRL_GROUP(GPIE6),
ASPEED_PINCTRL_GROUP(I2C10),
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
@@ -741,11 +2001,50 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(I2C7),
ASPEED_PINCTRL_GROUP(I2C8),
ASPEED_PINCTRL_GROUP(I2C9),
+ ASPEED_PINCTRL_GROUP(LAD0),
+ ASPEED_PINCTRL_GROUP(LAD1),
+ ASPEED_PINCTRL_GROUP(LAD2),
+ ASPEED_PINCTRL_GROUP(LAD3),
+ ASPEED_PINCTRL_GROUP(LCLK),
+ ASPEED_PINCTRL_GROUP(LFRAME),
+ ASPEED_PINCTRL_GROUP(LPCHC),
+ ASPEED_PINCTRL_GROUP(LPCPD),
+ ASPEED_PINCTRL_GROUP(LPCPLUS),
+ ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
+ ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(LSIRQ),
ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
+ ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
+ ASPEED_PINCTRL_GROUP(NCTS3),
+ ASPEED_PINCTRL_GROUP(NCTS4),
+ ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
+ ASPEED_PINCTRL_GROUP(NDCD3),
+ ASPEED_PINCTRL_GROUP(NDCD4),
+ ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
+ ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
+ ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
+ ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
+ ASPEED_PINCTRL_GROUP(NRI3),
+ ASPEED_PINCTRL_GROUP(NRI4),
+ ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
+ ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(NRTS4),
ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PEWAKE),
+ ASPEED_PINCTRL_GROUP(PNOR),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -758,22 +2057,102 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
ASPEED_PINCTRL_GROUP(RMII2),
+ ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
+ ASPEED_PINCTRL_GROUP(RXD3),
+ ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT10),
+ ASPEED_PINCTRL_GROUP(SALT11),
+ ASPEED_PINCTRL_GROUP(SALT12),
+ ASPEED_PINCTRL_GROUP(SALT13),
+ ASPEED_PINCTRL_GROUP(SALT14),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
+ ASPEED_PINCTRL_GROUP(SALT5),
+ ASPEED_PINCTRL_GROUP(SALT6),
+ ASPEED_PINCTRL_GROUP(SALT7),
+ ASPEED_PINCTRL_GROUP(SALT8),
+ ASPEED_PINCTRL_GROUP(SALT9),
+ ASPEED_PINCTRL_GROUP(SCL1),
+ ASPEED_PINCTRL_GROUP(SCL2),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SDA1),
+ ASPEED_PINCTRL_GROUP(SDA2),
+ ASPEED_PINCTRL_GROUP(SGPS1),
+ ASPEED_PINCTRL_GROUP(SGPS2),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
+ ASPEED_PINCTRL_GROUP(SIOPBI),
+ ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1CS1),
ASPEED_PINCTRL_GROUP(SPI1DEBUG),
ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPI2CK),
+ ASPEED_PINCTRL_GROUP(SPI2CS0),
+ ASPEED_PINCTRL_GROUP(SPI2CS1),
+ ASPEED_PINCTRL_GROUP(SPI2MISO),
+ ASPEED_PINCTRL_GROUP(SPI2MOSI),
+ ASPEED_PINCTRL_GROUP(TIMER3),
ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
+ ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
+ ASPEED_PINCTRL_GROUP(TXD3),
+ ASPEED_PINCTRL_GROUP(TXD4),
+ ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
ASPEED_PINCTRL_GROUP(VGABIOSROM),
+ ASPEED_PINCTRL_GROUP(VGAHS),
+ ASPEED_PINCTRL_GROUP(VGAVS),
+ ASPEED_PINCTRL_GROUP(VPI24),
+ ASPEED_PINCTRL_GROUP(VPO),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g5_functions[] = {
+ ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
+ ASPEED_PINCTRL_FUNC(BMCINT),
+ ASPEED_PINCTRL_FUNC(DDCCLK),
+ ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(ESPI),
+ ASPEED_PINCTRL_FUNC(FWSPICS1),
+ ASPEED_PINCTRL_FUNC(FWSPICS2),
ASPEED_PINCTRL_FUNC(GPID0),
ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
+ ASPEED_PINCTRL_FUNC(GPIE2),
+ ASPEED_PINCTRL_FUNC(GPIE4),
+ ASPEED_PINCTRL_FUNC(GPIE6),
ASPEED_PINCTRL_FUNC(I2C10),
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
@@ -786,11 +2165,50 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(I2C7),
ASPEED_PINCTRL_FUNC(I2C8),
ASPEED_PINCTRL_FUNC(I2C9),
+ ASPEED_PINCTRL_FUNC(LAD0),
+ ASPEED_PINCTRL_FUNC(LAD1),
+ ASPEED_PINCTRL_FUNC(LAD2),
+ ASPEED_PINCTRL_FUNC(LAD3),
+ ASPEED_PINCTRL_FUNC(LCLK),
+ ASPEED_PINCTRL_FUNC(LFRAME),
+ ASPEED_PINCTRL_FUNC(LPCHC),
+ ASPEED_PINCTRL_FUNC(LPCPD),
+ ASPEED_PINCTRL_FUNC(LPCPLUS),
+ ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
+ ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(LSIRQ),
ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
+ ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
+ ASPEED_PINCTRL_FUNC(NCTS3),
+ ASPEED_PINCTRL_FUNC(NCTS4),
+ ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
+ ASPEED_PINCTRL_FUNC(NDCD3),
+ ASPEED_PINCTRL_FUNC(NDCD4),
+ ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
+ ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
+ ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
+ ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
+ ASPEED_PINCTRL_FUNC(NRI3),
+ ASPEED_PINCTRL_FUNC(NRI4),
+ ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
+ ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(NRTS4),
ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PEWAKE),
+ ASPEED_PINCTRL_FUNC(PNOR),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -803,16 +2221,68 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
ASPEED_PINCTRL_FUNC(RMII2),
+ ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
+ ASPEED_PINCTRL_FUNC(RXD3),
+ ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT10),
+ ASPEED_PINCTRL_FUNC(SALT11),
+ ASPEED_PINCTRL_FUNC(SALT12),
+ ASPEED_PINCTRL_FUNC(SALT13),
+ ASPEED_PINCTRL_FUNC(SALT14),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
+ ASPEED_PINCTRL_FUNC(SALT5),
+ ASPEED_PINCTRL_FUNC(SALT6),
+ ASPEED_PINCTRL_FUNC(SALT7),
+ ASPEED_PINCTRL_FUNC(SALT8),
+ ASPEED_PINCTRL_FUNC(SALT9),
+ ASPEED_PINCTRL_FUNC(SCL1),
+ ASPEED_PINCTRL_FUNC(SCL2),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SDA1),
+ ASPEED_PINCTRL_FUNC(SDA2),
+ ASPEED_PINCTRL_FUNC(SGPS1),
+ ASPEED_PINCTRL_FUNC(SGPS2),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
+ ASPEED_PINCTRL_FUNC(SIOPBI),
+ ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1CS1),
ASPEED_PINCTRL_FUNC(SPI1DEBUG),
ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPI2CK),
+ ASPEED_PINCTRL_FUNC(SPI2CS0),
+ ASPEED_PINCTRL_FUNC(SPI2CS1),
+ ASPEED_PINCTRL_FUNC(SPI2MISO),
+ ASPEED_PINCTRL_FUNC(SPI2MOSI),
+ ASPEED_PINCTRL_FUNC(TIMER3),
ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
+ ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
+ ASPEED_PINCTRL_FUNC(TXD3),
+ ASPEED_PINCTRL_FUNC(TXD4),
+ ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
ASPEED_PINCTRL_FUNC(VGABIOSROM),
+ ASPEED_PINCTRL_FUNC(VGAHS),
+ ASPEED_PINCTRL_FUNC(VGAVS),
+ ASPEED_PINCTRL_FUNC(VPI24),
+ ASPEED_PINCTRL_FUNC(VPO),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g5_pinctrl_data = {
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 0e93cbf2ff33..08a10d4db229 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -260,6 +260,7 @@
#define SCUA0 0xA0 /* Multi-function Pin Control #7 */
#define SCUA4 0xA4 /* Multi-function Pin Control #8 */
#define SCUA8 0xA8 /* Multi-function Pin Control #9 */
+#define SCUAC 0xAC /* Multi-function Pin Control #10 */
#define HW_STRAP2 0xD0 /* Strapping */
/**
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v3 2/4] pinctrl: aspeed-g4: Add mux configuration for all pins
From: Andrew Jeffery @ 2016-12-06 3:11 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Joel Stanley,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Timothy Pearson
In-Reply-To: <20161206031152.3004-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
The patch introducing the g4 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms. Now, update the bindings document
to reflect the complete functionality and implement the necessary pin
configuration tables in the driver.
Cc: Timothy Pearson <tpearson-z0qzliK6Om0mgXJStvpl+vpXobYPEAuW@public.gmane.org>
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
Acked-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 19 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1097 +++++++++++++++++++-
2 files changed, 1096 insertions(+), 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 115b0cce6c1c..f5c427d11337 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -38,13 +38,18 @@ supported:
aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:
-ACPI BMCINT DDCCLK DDCDAT FLACK FLBUSY FLWP GPID0 GPIE0 GPIE2 GPIE4 GPIE6 I2C10
-I2C11 I2C12 I2C13 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCSMI MDIO1
-MDIO2 NCTS1 NCTS3 NCTS4 NDCD1 NDCD3 NDCD4 NDSR1 NDSR3 NDTR1 NDTR3 NRI1 NRI3
-NRI4 NRTS1 NRTS3 PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RMII1 ROM16
-ROM8 ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD3 RXD4 SD1 SGPMI SIOPBI SIOPBO TIMER3
-TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD3 TXD4 UART6 VGAHS VGAVS VPI18 VPI24 VPI30
-VPO12 VPO24
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
+GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
+I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
+MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
+NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0
+PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
+ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
+SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
+TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS
+VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index 558bd102416c..09b668415c56 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -43,9 +43,18 @@
* Not all pins have their signals defined (yet).
*/
+#define D6 0
+SSSF_PIN_DECL(D6, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+
+#define B5 1
+SSSF_PIN_DECL(B5, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
#define A4 2
SSSF_PIN_DECL(A4, GPIOA2, TIMER3, SIG_DESC_SET(SCU80, 2));
+#define E6 3
+SSSF_PIN_DECL(E6, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
+
#define I2C9_DESC SIG_DESC_SET(SCU90, 22)
#define C5 4
@@ -80,6 +89,26 @@ MS_PIN_DECL(D5, GPIOA7, MDIO2, TIMER8);
FUNC_GROUP_DECL(TIMER8, D5);
FUNC_GROUP_DECL(MDIO2, A3, D5);
+#define J21 8
+SSSF_PIN_DECL(J21, GPIOB0, SALT1, SIG_DESC_SET(SCU80, 8));
+
+#define J20 9
+SSSF_PIN_DECL(J20, GPIOB1, SALT2, SIG_DESC_SET(SCU80, 9));
+
+#define H18 10
+SSSF_PIN_DECL(H18, GPIOB2, SALT3, SIG_DESC_SET(SCU80, 10));
+
+#define F18 11
+SSSF_PIN_DECL(F18, GPIOB3, SALT4, SIG_DESC_SET(SCU80, 11));
+
+#define E19 12
+SIG_EXPR_DECL(LPCRST, LPCRST, SIG_DESC_SET(SCU80, 12));
+SIG_EXPR_DECL(LPCRST, LPCRSTS, SIG_DESC_SET(HW_STRAP1, 14));
+SIG_EXPR_LIST_DECL_DUAL(LPCRST, LPCRST, LPCRSTS);
+SS_PIN_DECL(E19, GPIOB4, LPCRST);
+
+FUNC_GROUP_DECL(LPCRST, E19);
+
#define H19 13
#define H19_DESC SIG_DESC_SET(SCU80, 13)
SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H19_DESC);
@@ -92,6 +121,19 @@ FUNC_GROUP_DECL(LPCSMI, H19);
#define H20 14
SSSF_PIN_DECL(H20, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+#define E18 15
+SIG_EXPR_LIST_DECL_SINGLE(EXTRST, EXTRST,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_BIT(SCU90, 31, 0),
+ SIG_DESC_SET(SCU3C, 3));
+SIG_EXPR_LIST_DECL_SINGLE(SPICS1, SPICS1,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_SET(SCU90, 31));
+MS_PIN_DECL(E18, GPIOB7, EXTRST, SPICS1);
+
+FUNC_GROUP_DECL(EXTRST, E18);
+FUNC_GROUP_DECL(SPICS1, E18);
+
#define SD1_DESC SIG_DESC_SET(SCU90, 0)
#define I2C10_DESC SIG_DESC_SET(SCU90, 23)
@@ -170,6 +212,62 @@ MS_PIN_DECL(D16, GPIOD1, SD2CMD, GPID0OUT);
FUNC_GROUP_DECL(GPID0, A18, D16);
+#define GPID2_DESC SIG_DESC_SET(SCU8C, 9)
+
+#define B17 26
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT0, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2IN, GPID2, GPID);
+MS_PIN_DECL(B17, GPIOD2, SD2DAT0, GPID2IN);
+
+#define A17 27
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT1, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2OUT, GPID2, GPID);
+MS_PIN_DECL(A17, GPIOD3, SD2DAT1, GPID2OUT);
+
+FUNC_GROUP_DECL(GPID2, B17, A17);
+
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define C16 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(C16, GPIOD4, SD2DAT2, GPID4IN);
+
+#define B16 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(B16, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, C16, B16);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define A16 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(A16, GPIOD6, SD2CD, GPID6IN);
+
+#define E15 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(E15, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, A16, E15);
+FUNC_GROUP_DECL(SD2, A18, D16, B17, A17, C16, B16, A16, E15);
+FUNC_GROUP_DECL(GPID, A18, D16, B17, A17, C16, B16, A16, E15);
+
#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
@@ -266,6 +364,15 @@ MS_PIN_DECL(B19, GPIOF1, NDCD4, SIOPBI);
FUNC_GROUP_DECL(NDCD4, B19);
FUNC_GROUP_DECL(SIOPBI, B19);
+#define A20 42
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, SIG_DESC_SET(SCUA4, 12));
+SIG_EXPR_DECL(SIOPWRGD, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+MS_PIN_DECL(A20, GPIOF2, NDSR4, SIOPWRGD);
+FUNC_GROUP_DECL(NDSR4, A20);
+FUNC_GROUP_DECL(SIOPWRGD, A20);
+
#define D17 43
SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
SIG_EXPR_DECL(SIOPBO, SIOPBO, SIG_DESC_SET(SCUA4, 14));
@@ -275,7 +382,17 @@ MS_PIN_DECL(D17, GPIOF3, NRI4, SIOPBO);
FUNC_GROUP_DECL(NRI4, D17);
FUNC_GROUP_DECL(SIOPBO, D17);
-FUNC_GROUP_DECL(ACPI, B19, D17);
+#define B18 44
+SSSF_PIN_DECL(B18, GPIOF4, NDTR4, SIG_DESC_SET(SCU80, 28));
+
+#define A19 45
+SIG_EXPR_LIST_DECL_SINGLE(NDTS4, NDTS4, SIG_DESC_SET(SCU80, 29));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, SIG_DESC_SET(SCUA4, 15));
+SIG_EXPR_DECL(SIOSCI, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+MS_PIN_DECL(A19, GPIOF5, NDTS4, SIOSCI);
+FUNC_GROUP_DECL(NDTS4, A19);
+FUNC_GROUP_DECL(SIOSCI, A19);
#define E16 46
SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
@@ -283,6 +400,34 @@ SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
#define C17 47
SSSF_PIN_DECL(C17, GPIOF7, RXD4, SIG_DESC_SET(SCU80, 31));
+#define A14 48
+SSSF_PIN_DECL(A14, GPIOG0, SGPSCK, SIG_DESC_SET(SCU84, 0));
+
+#define E13 49
+SSSF_PIN_DECL(E13, GPIOG1, SGPSLD, SIG_DESC_SET(SCU84, 1));
+
+#define D13 50
+SSSF_PIN_DECL(D13, GPIOG2, SGPSI0, SIG_DESC_SET(SCU84, 2));
+
+#define C13 51
+SSSF_PIN_DECL(C13, GPIOG3, SGPSI1, SIG_DESC_SET(SCU84, 3));
+
+#define B13 52
+SIG_EXPR_LIST_DECL_SINGLE(OSCCLK, OSCCLK, SIG_DESC_SET(SCU2C, 1));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(B13, GPIOG4, OSCCLK, WDTRST1);
+
+FUNC_GROUP_DECL(OSCCLK, B13);
+FUNC_GROUP_DECL(WDTRST1, B13);
+
+#define Y21 53
+SIG_EXPR_LIST_DECL_SINGLE(USBCKI, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(Y21, GPIOG5, USBCKI, WDTRST2);
+
+FUNC_GROUP_DECL(USBCKI, Y21);
+FUNC_GROUP_DECL(WDTRST2, Y21);
+
#define AA22 54
SSSF_PIN_DECL(AA22, GPIOG6, FLBUSY, SIG_DESC_SET(SCU84, 6));
@@ -352,6 +497,93 @@ MS_PIN_DECL(E7, GPIOH7, ROMD15, RXD6);
FUNC_GROUP_DECL(UART6, A8, C7, B7, A7, D7, B6, A6, E7);
+#define SPI1_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
+
+#define C22 64
+SIG_EXPR_DECL(SYSCS, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCS, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCS, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C22, GPIOI0, SYSCS);
+
+#define G18 65
+SIG_EXPR_DECL(SYSCK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCK, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(G18, GPIOI1, SYSCK);
+
+#define D19 66
+SIG_EXPR_DECL(SYSDO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDO, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(D19, GPIOI2, SYSDO);
+
+#define C20 67
+SIG_EXPR_DECL(SYSDI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDI, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C20, GPIOI3, SYSDI);
+
+#define VB_DESC SIG_DESC_SET(HW_STRAP1, 5)
+
+#define B22 68
+SIG_EXPR_DECL(SPI1CS0, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CS0, SIG_EXPR_PTR(SPI1CS0, SPI1),
+ SIG_EXPR_PTR(SPI1CS0, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CS0, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCS, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(B22, GPIOI4, SPI1CS0, VBCS);
+
+#define G19 69
+SIG_EXPR_DECL(SPI1CK, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CK, SIG_EXPR_PTR(SPI1CK, SPI1),
+ SIG_EXPR_PTR(SPI1CK, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CK, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCK, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(G19, GPIOI5, SPI1CK, VBCK);
+
+#define C18 70
+SIG_EXPR_DECL(SPI1DO, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DO, SIG_EXPR_PTR(SPI1DO, SPI1),
+ SIG_EXPR_PTR(SPI1DO, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DO, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDO, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(C18, GPIOI6, SPI1DO, VBDO);
+
+#define E20 71
+SIG_EXPR_DECL(SPI1DI, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DI, SIG_EXPR_PTR(SPI1DI, SPI1),
+ SIG_EXPR_PTR(SPI1DI, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DI, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDI, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(E20, GPIOI7, SPI1DI, VBDI);
+
+FUNC_GROUP_DECL(SPI1, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1DEBUG, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1PASSTHRU, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(VGABIOS_ROM, B22, G19, C18, E20);
+
+#define J5 72
+SSSF_PIN_DECL(J5, GPIOJ0, SGPMCK, SIG_DESC_SET(SCU84, 8));
+
+#define J4 73
+SSSF_PIN_DECL(J4, GPIOJ1, SGPMLD, SIG_DESC_SET(SCU84, 9));
+
+#define K5 74
+SSSF_PIN_DECL(K5, GPIOJ2, SGPMO, SIG_DESC_SET(SCU84, 10));
+
#define J3 75
SSSF_PIN_DECL(J3, GPIOJ3, SGPMI, SIG_DESC_SET(SCU84, 11));
@@ -496,6 +728,102 @@ SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, U5_DESC);
MS_PIN_DECL(U5, GPIOL7, VPIB1, RXD1);
FUNC_GROUP_DECL(RXD1, U5);
+#define V3 96
+#define V3_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_DECL(VPIOB2, VPI18, VPI18_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI24, VPI24_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI30, VPI30_DESC, V3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB2, SIG_EXPR_PTR(VPIOB2, VPI18),
+ SIG_EXPR_PTR(VPIOB2, VPI24),
+ SIG_EXPR_PTR(VPIOB2, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, V3_DESC);
+MS_PIN_DECL(V3, GPIOM0, VPIOB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, V3);
+
+#define W2 97
+#define W2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_DECL(VPIOB3, VPI18, VPI18_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI24, VPI24_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI30, VPI30_DESC, W2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB3, SIG_EXPR_PTR(VPIOB3, VPI18),
+ SIG_EXPR_PTR(VPIOB3, VPI24),
+ SIG_EXPR_PTR(VPIOB3, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, W2_DESC);
+MS_PIN_DECL(W2, GPIOM1, VPIOB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, W2);
+
+#define Y1 98
+#define Y1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_DECL(VPIOB4, VPI18, VPI18_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI24, VPI24_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI30, VPI30_DESC, Y1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB4, SIG_EXPR_PTR(VPIOB4, VPI18),
+ SIG_EXPR_PTR(VPIOB4, VPI24),
+ SIG_EXPR_PTR(VPIOB4, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, Y1_DESC);
+MS_PIN_DECL(Y1, GPIOM2, VPIOB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, Y1);
+
+#define V4 99
+#define V4_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_DECL(VPIOB5, VPI18, VPI18_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI24, VPI24_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI30, VPI30_DESC, V4_DESC);
+SIG_EXPR_LIST_DECL(VPIOB5, SIG_EXPR_PTR(VPIOB5, VPI18),
+ SIG_EXPR_PTR(VPIOB5, VPI24),
+ SIG_EXPR_PTR(VPIOB5, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, V4_DESC);
+MS_PIN_DECL(V4, GPIOM3, VPIOB5, NRI2);
+FUNC_GROUP_DECL(NRI2, V4);
+
+#define W3 100
+#define W3_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_DECL(VPIOB6, VPI18, VPI18_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI24, VPI24_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI30, VPI30_DESC, W3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB6, SIG_EXPR_PTR(VPIOB6, VPI18),
+ SIG_EXPR_PTR(VPIOB6, VPI24),
+ SIG_EXPR_PTR(VPIOB6, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, W3_DESC);
+MS_PIN_DECL(W3, GPIOM4, VPIOB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, W3);
+
+#define Y2 101
+#define Y2_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_DECL(VPIOB7, VPI18, VPI18_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI24, VPI24_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI30, VPI30_DESC, Y2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB7, SIG_EXPR_PTR(VPIOB7, VPI18),
+ SIG_EXPR_PTR(VPIOB7, VPI24),
+ SIG_EXPR_PTR(VPIOB7, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, Y2_DESC);
+MS_PIN_DECL(Y2, GPIOM5, VPIOB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, Y2);
+
+#define AA1 102
+#define AA1_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_DECL(VPIOB8, VPI18, VPI18_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI24, VPI24_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI30, VPI30_DESC, AA1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB8, SIG_EXPR_PTR(VPIOB8, VPI18),
+ SIG_EXPR_PTR(VPIOB8, VPI24),
+ SIG_EXPR_PTR(VPIOB8, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, AA1_DESC);
+MS_PIN_DECL(AA1, GPIOM6, VPIOB8, TXD2);
+FUNC_GROUP_DECL(TXD2, AA1);
+
+#define V5 103
+#define V5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_DECL(VPIOB9, VPI18, VPI18_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI24, VPI24_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI30, VPI30_DESC, V5_DESC);
+SIG_EXPR_LIST_DECL(VPIOB9, SIG_EXPR_PTR(VPIOB9, VPI18),
+ SIG_EXPR_PTR(VPIOB9, VPI24),
+ SIG_EXPR_PTR(VPIOB9, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, V5_DESC);
+MS_PIN_DECL(V5, GPIOM7, VPIOB9, RXD2);
+FUNC_GROUP_DECL(RXD2, V5);
+
#define W4 104
#define W4_DESC SIG_DESC_SET(SCU88, 0)
SIG_EXPR_LIST_DECL_SINGLE(VPIG0, VPI30, VPI30_DESC, W4_DESC);
@@ -580,10 +908,57 @@ SS_PIN_DECL(V6, GPIOO0, VPIG8);
SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9));
SS_PIN_DECL(Y5, GPIOO1, VPIG9);
-FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2);
-FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2, V6, Y5);
-FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, W4, Y3, AA22, W5, Y4, AA3,
- AB2);
+#define AA4 114
+SIG_EXPR_LIST_DECL_SINGLE(VPIR0, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(AA4, GPIOO2, VPIR0);
+
+#define AB3 115
+SIG_EXPR_LIST_DECL_SINGLE(VPIR1, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB3, GPIOO3, VPIR1);
+
+#define W6 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12));
+SS_PIN_DECL(W6, GPIOO4, VPIR2);
+
+#define AA5 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13));
+SS_PIN_DECL(AA5, GPIOO5, VPIR3);
+
+#define AB4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14));
+SS_PIN_DECL(AB4, GPIOO6, VPIR4);
+
+#define V7 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15));
+SS_PIN_DECL(V7, GPIOO7, VPIR5);
+
+#define Y6 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16));
+SS_PIN_DECL(Y6, GPIOP0, VPIR6);
+
+#define AB5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17));
+SS_PIN_DECL(AB5, GPIOP1, VPIR7);
+
+#define W7 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18));
+SS_PIN_DECL(W7, GPIOP2, VPIR8);
+
+#define AA6 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19));
+SS_PIN_DECL(AA6, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2);
+FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2, V6, Y5, W6, AA5, AB4, V7, Y6, AB5, W7,
+ AA6);
+FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, V3, W2, Y1, V4, W3, Y2, AA1,
+ V5, W4, Y3, AA22, W5, Y4, AA3, AB2, AA4, AB3);
+
+#define AB6 124
+SIG_EXPR_LIST_DECL_SINGLE(GPIOP4, GPIOP4);
+MS_PIN_DECL_(AB6, SIG_EXPR_LIST_PTR(GPIOP4));
#define Y7 125
SIG_EXPR_LIST_DECL_SINGLE(GPIOP5, GPIOP5);
@@ -619,6 +994,18 @@ SS_PIN_DECL(F5, GPIOQ3, SDA4);
FUNC_GROUP_DECL(I2C4, B1, F5);
+#define I2C14_DESC SIG_DESC_SET(SCU90, 27)
+
+#define H4 132
+SIG_EXPR_LIST_DECL_SINGLE(SCL14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H4, GPIOQ4, SCL14);
+
+#define H3 133
+SIG_EXPR_LIST_DECL_SINGLE(SDA14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H3, GPIOQ5, SDA14);
+
+FUNC_GROUP_DECL(I2C14, H4, H3);
+
#define DASH9028_DESC SIG_DESC_SET(SCU90, 28)
#define H2 134
@@ -776,13 +1163,6 @@ SIG_EXPR_LIST_DECL(ROMA23, SIG_EXPR_PTR(ROMA23, ROM8),
SIG_EXPR_LIST_DECL_SINGLE(VPOR5, VPO24, K18_DESC, VPO_24_OFF);
MS_PIN_DECL(K18, GPIOS7, ROMA23, VPOR5);
-FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
- U19);
-FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
- A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19);
-FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20);
-FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22);
-
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
#define A12 152
@@ -827,6 +1207,50 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1TXD3, RGMII1);
MS_PIN_DECL_(A13, SIG_EXPR_LIST_PTR(GPIOT5), SIG_EXPR_LIST_PTR(DASHA13),
SIG_EXPR_LIST_PTR(RGMII1TXD3));
+#define RMII2_DESC SIG_DESC_BIT(HW_STRAP1, 7, 0)
+
+#define D9 158
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT6, GPIOT6, SIG_DESC_SET(SCUA0, 6));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXEN, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCK, RGMII2);
+MS_PIN_DECL_(D9, SIG_EXPR_LIST_PTR(GPIOT6), SIG_EXPR_LIST_PTR(RMII2TXEN),
+ SIG_EXPR_LIST_PTR(RGMII2TXCK));
+
+#define E9 159
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT7, GPIOT7, SIG_DESC_SET(SCUA0, 7));
+SIG_EXPR_LIST_DECL_SINGLE(DASHE9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCTL, RGMII2);
+MS_PIN_DECL_(E9, SIG_EXPR_LIST_PTR(GPIOT7), SIG_EXPR_LIST_PTR(DASHE9),
+ SIG_EXPR_LIST_PTR(RGMII2TXCTL));
+
+#define A10 160
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU0, GPIOU0, SIG_DESC_SET(SCUA0, 8));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD0, RGMII2);
+MS_PIN_DECL_(A10, SIG_EXPR_LIST_PTR(GPIOU0), SIG_EXPR_LIST_PTR(RMII2TXD0),
+ SIG_EXPR_LIST_PTR(RGMII2TXD0));
+
+#define B10 161
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU1, GPIOU1, SIG_DESC_SET(SCUA0, 9));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD1, RGMII2);
+MS_PIN_DECL_(B10, SIG_EXPR_LIST_PTR(GPIOU1), SIG_EXPR_LIST_PTR(RMII2TXD1),
+ SIG_EXPR_LIST_PTR(RGMII2TXD1));
+
+#define C10 162
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU2, GPIOU2, SIG_DESC_SET(SCUA0, 10));
+SIG_EXPR_LIST_DECL_SINGLE(DASHC10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD2, RGMII2);
+MS_PIN_DECL_(C10, SIG_EXPR_LIST_PTR(GPIOU2), SIG_EXPR_LIST_PTR(DASHC10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD2));
+
+#define D10 163
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU3, GPIOU3, SIG_DESC_SET(SCUA0, 11));
+SIG_EXPR_LIST_DECL_SINGLE(DASHD10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD3, RGMII2);
+MS_PIN_DECL_(D10, SIG_EXPR_LIST_PTR(GPIOU3), SIG_EXPR_LIST_PTR(DASHD10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD3));
+
#define E11 164
SIG_EXPR_LIST_DECL_SINGLE(GPIOU4, GPIOU4, SIG_DESC_SET(SCUA0, 12));
SIG_EXPR_LIST_DECL_SINGLE(RMII1RCLK, RMII1, RMII1_DESC);
@@ -869,11 +1293,419 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1RXD3, RGMII1);
MS_PIN_DECL_(E10, SIG_EXPR_LIST_PTR(GPIOV1), SIG_EXPR_LIST_PTR(RMII1RXER),
SIG_EXPR_LIST_PTR(RGMII1RXD3));
+#define C9 170
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV2, GPIOV2, SIG_DESC_SET(SCUA0, 18));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RCLK, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCK, RGMII2);
+MS_PIN_DECL_(C9, SIG_EXPR_LIST_PTR(GPIOV2), SIG_EXPR_LIST_PTR(RMII2RCLK),
+ SIG_EXPR_LIST_PTR(RGMII2RXCK));
+
+#define B9 171
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV3, GPIOV3, SIG_DESC_SET(SCUA0, 19));
+SIG_EXPR_LIST_DECL_SINGLE(DASHB9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCTL, RGMII2);
+MS_PIN_DECL_(B9, SIG_EXPR_LIST_PTR(GPIOV3), SIG_EXPR_LIST_PTR(DASHB9),
+ SIG_EXPR_LIST_PTR(RGMII2RXCTL));
+
+#define A9 172
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV4, GPIOV4, SIG_DESC_SET(SCUA0, 20));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD0, RGMII2);
+MS_PIN_DECL_(A9, SIG_EXPR_LIST_PTR(GPIOV4), SIG_EXPR_LIST_PTR(RMII2RXD0),
+ SIG_EXPR_LIST_PTR(RGMII2RXD0));
+
+#define E8 173
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV5, GPIOV5, SIG_DESC_SET(SCUA0, 21));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD1, RGMII2);
+MS_PIN_DECL_(E8, SIG_EXPR_LIST_PTR(GPIOV5), SIG_EXPR_LIST_PTR(RMII2RXD1),
+ SIG_EXPR_LIST_PTR(RGMII2RXD1));
+
+#define D8 174
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV6, GPIOV6, SIG_DESC_SET(SCUA0, 22));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2CRSDV, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD2, RGMII2);
+MS_PIN_DECL_(D8, SIG_EXPR_LIST_PTR(GPIOV6), SIG_EXPR_LIST_PTR(RMII2CRSDV),
+ SIG_EXPR_LIST_PTR(RGMII2RXD2));
+
+#define C8 175
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV7, GPIOV7, SIG_DESC_SET(SCUA0, 23));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXER, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD3, RGMII2);
+MS_PIN_DECL_(C8, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
+ SIG_EXPR_LIST_PTR(RGMII2RXD3));
+
FUNC_GROUP_DECL(RMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
+FUNC_GROUP_DECL(RMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+FUNC_GROUP_DECL(RGMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+
+#define L5 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(L5, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, L5);
+
+#define L4 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(L4, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, L4);
+
+#define L3 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(L3, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, L3);
+
+#define L2 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(L2, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, L2);
+
+#define L1 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(L1, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, L1);
+
+#define M5 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(M5, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, M5);
+
+#define M4 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(M4, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, M4);
+
+#define M3 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(M3, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, M3);
+
+#define M2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(M2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, M2);
+
+#define M1 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(M1, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, M1);
+
+#define N5 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(N5, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, N5);
+
+#define N4 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(N4, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, N4);
+
+#define N3 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(N3, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, N3);
+
+#define N2 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(N2, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, N2);
+
+#define N1 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(N1, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, N1);
+
+#define P5 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(P5, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, P5);
+
+#define C21 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SS_PIN_DECL(C21, GPIOY0, SIOS3);
+FUNC_GROUP_DECL(SIOS3, C21);
+
+#define F20 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SS_PIN_DECL(F20, GPIOY1, SIOS5);
+FUNC_GROUP_DECL(SIOS5, F20);
+
+#define G20 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SS_PIN_DECL(G20, GPIOY2, SIOPWREQ);
+FUNC_GROUP_DECL(SIOPWREQ, G20);
+
+#define K20 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SS_PIN_DECL(K20, GPIOY3, SIOONCTRL);
+FUNC_GROUP_DECL(SIOONCTRL, K20);
+
+FUNC_GROUP_DECL(ACPI, B19, A20, D17, A19, C21, F20, G20, K20);
+
+#define R22 200
+#define R22_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(ROMA2, ROM8, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA2, ROM16, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA2, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB0, VPO12, R22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB0, VPO24, R22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB0, VPOOFF1, R22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB0, SIG_EXPR_PTR(VPOB0, VPO12),
+ SIG_EXPR_PTR(VPOB0, VPO24), SIG_EXPR_PTR(VPOB0, VPOOFF1));
+MS_PIN_DECL(R22, GPIOZ0, ROMA2, VPOB0);
+
+#define P18 201
+#define P18_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(ROMA3, ROM8, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA3, ROM16, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA3, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB1, VPO12, P18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB1, VPO24, P18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB1, VPOOFF1, P18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB1, SIG_EXPR_PTR(VPOB1, VPO12),
+ SIG_EXPR_PTR(VPOB1, VPO24), SIG_EXPR_PTR(VPOB1, VPOOFF1));
+MS_PIN_DECL(P18, GPIOZ1, ROMA3, VPOB1);
+
+#define P19 202
+#define P19_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(ROMA4, ROM8, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA4, ROM16, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA4, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB2, VPO12, P19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB2, VPO24, P19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, P19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO12),
+ SIG_EXPR_PTR(VPOB2, VPO24), SIG_EXPR_PTR(VPOB2, VPOOFF1));
+MS_PIN_DECL(P19, GPIOZ2, ROMA4, VPOB2);
+
+#define P20 203
+#define P20_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(ROMA5, ROM8, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA5, ROM16, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA5, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB3, VPO12, P20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB3, VPO24, P20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, P20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO12),
+ SIG_EXPR_PTR(VPOB3, VPO24), SIG_EXPR_PTR(VPOB3, VPOOFF1));
+MS_PIN_DECL(P20, GPIOZ3, ROMA5, VPOB3);
+
+#define P21 204
+#define P21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(ROMA6, ROM8, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA6, ROM16, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA6, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB4, VPO12, P21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB4, VPO24, P21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, P21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO12),
+ SIG_EXPR_PTR(VPOB4, VPO24), SIG_EXPR_PTR(VPOB4, VPOOFF1));
+MS_PIN_DECL(P21, GPIOZ4, ROMA6, VPOB4);
+
+#define P22 205
+#define P22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(ROMA7, ROM8, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA7, ROM16, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA7, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB5, VPO12, P22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB5, VPO24, P22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO12),
+ SIG_EXPR_PTR(VPOB5, VPO24), SIG_EXPR_PTR(VPOB5, VPOOFF1));
+MS_PIN_DECL(P22, GPIOZ5, ROMA7, VPOB5);
+
+#define M19 206
+#define M19_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(ROMA8, ROM8, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA8, ROM16, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA8, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB6, VPO12, M19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB6, VPO24, M19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, M19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO12),
+ SIG_EXPR_PTR(VPOB6, VPO24), SIG_EXPR_PTR(VPOB6, VPOOFF1));
+MS_PIN_DECL(M19, GPIOZ6, ROMA8, VPOB6);
+
+#define M20 207
+#define M20_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(ROMA9, ROM8, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA9, ROM16, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA9, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB7, VPO12, M20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB7, VPO24, M20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, M20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO12),
+ SIG_EXPR_PTR(VPOB7, VPO24), SIG_EXPR_PTR(VPOB7, VPOOFF1));
+MS_PIN_DECL(M20, GPIOZ7, ROMA9, VPOB7);
+
+#define M21 208
+#define M21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(ROMA10, ROM8, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA10, ROM16, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA10, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG0, VPO12, M21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG0, VPO24, M21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG0, VPOOFF1, M21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG0, SIG_EXPR_PTR(VPOG0, VPO12),
+ SIG_EXPR_PTR(VPOG0, VPO24), SIG_EXPR_PTR(VPOG0, VPOOFF1));
+MS_PIN_DECL(M21, GPIOAA0, ROMA10, VPOG0);
+
+#define M22 209
+#define M22_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(ROMA11, ROM8, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA11, ROM16, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA11, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG1, VPO12, M22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG1, VPO24, M22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG1, VPOOFF1, M22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG1, SIG_EXPR_PTR(VPOG1, VPO12),
+ SIG_EXPR_PTR(VPOG1, VPO24), SIG_EXPR_PTR(VPOG1, VPOOFF1));
+MS_PIN_DECL(M22, GPIOAA1, ROMA11, VPOG1);
+
+#define L18 210
+#define L18_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(ROMA12, ROM8, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA12, ROM16, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA12, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG2, VPO12, L18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG2, VPO24, L18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, L18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO12),
+ SIG_EXPR_PTR(VPOG2, VPO24), SIG_EXPR_PTR(VPOG2, VPOOFF1));
+MS_PIN_DECL(L18, GPIOAA2, ROMA12, VPOG2);
+
+#define L19 211
+#define L19_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(ROMA13, ROM8, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA13, ROM16, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA13, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG3, VPO12, L19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG3, VPO24, L19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, L19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO12),
+ SIG_EXPR_PTR(VPOG3, VPO24), SIG_EXPR_PTR(VPOG3, VPOOFF1));
+MS_PIN_DECL(L19, GPIOAA3, ROMA13, VPOG3);
+
+#define L20 212
+#define L20_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(ROMA14, ROM8, L20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA14, ROM16, L20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA14, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG4, VPO24, L20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, L20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG4, VPO24, VPOOFF1);
+MS_PIN_DECL(L20, GPIOAA4, ROMA14, VPOG4);
+
+#define L21 213
+#define L21_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(ROMA15, ROM8, L21_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA15, ROM16, L21_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA15, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG5, VPO24, L21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, L21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG5, VPO24, VPOOFF1);
+MS_PIN_DECL(L21, GPIOAA5, ROMA15, VPOG5);
+
+#define T18 214
+#define T18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(ROMA16, ROM8, T18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA16, ROM16, T18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA16, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG6, VPO24, T18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, T18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG6, VPO24, VPOOFF1);
+MS_PIN_DECL(T18, GPIOAA6, ROMA16, VPOG6);
+
+#define N18 215
+#define N18_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(ROMA17, ROM8, N18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA17, ROM16, N18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA17, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG7, VPO24, N18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, N18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG7, VPO24, VPOOFF1);
+MS_PIN_DECL(N18, GPIOAA7, ROMA17, VPOG7);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(ROMA18, ROM8, N19_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA18, ROM16, N19_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA18, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR0, VPO24, N19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR0, VPOOFF1, N19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR0, VPO24, VPOOFF1);
+MS_PIN_DECL(N19, GPIOAB0, ROMA18, VPOR0);
+
+#define M18 217
+#define M18_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(ROMA19, ROM8, M18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA19, ROM16, M18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA19, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR1, VPO24, M18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR1, VPOOFF1, M18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR1, VPO24, VPOOFF1);
+MS_PIN_DECL(M18, GPIOAB1, ROMA19, VPOR1);
+
+#define N22 218
+#define N22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(ROMA20, ROM8, N22_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA20, ROM16, N22_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA20, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR2, VPO24, N22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, N22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR2, VPO24, VPOOFF1);
+MS_PIN_DECL(N22, GPIOAB2, ROMA20, VPOR2);
+
+#define N20 219
+#define N20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(ROMA21, ROM8, N20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA21, ROM16, N20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA21, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR3, VPO24, N20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, N20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR3, VPO24, VPOOFF1);
+MS_PIN_DECL(N20, GPIOAB3, ROMA21, VPOR3);
+
+FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
+ U19, R22, P18, P19, P20, P21, P22, M19, M20, M21, M22, L18,
+ L19, L20, L21, T18, N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
+ A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19, L20, L21, T18,
+ N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20, R22, P18, P19, P20, P21, P22, M19,
+ M20, M21, M22, L18, L19, L20, L21, T18, N18, N19, M18, N22,
+ N20);
+FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19);
+
/* Note we account for GPIOY4-GPIOY7 even though they're not valid, thus 216
* pins becomes 220.
*/
@@ -883,84 +1715,180 @@ FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(A1),
+ ASPEED_PINCTRL_PIN(A10),
ASPEED_PINCTRL_PIN(A11),
ASPEED_PINCTRL_PIN(A12),
ASPEED_PINCTRL_PIN(A13),
+ ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A6),
ASPEED_PINCTRL_PIN(A7),
ASPEED_PINCTRL_PIN(A8),
+ ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
ASPEED_PINCTRL_PIN(AA2),
ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AA6),
ASPEED_PINCTRL_PIN(AA7),
ASPEED_PINCTRL_PIN(AB1),
ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
+ ASPEED_PINCTRL_PIN(AB6),
ASPEED_PINCTRL_PIN(AB7),
ASPEED_PINCTRL_PIN(B1),
+ ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
ASPEED_PINCTRL_PIN(B12),
+ ASPEED_PINCTRL_PIN(B13),
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
+ ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
+ ASPEED_PINCTRL_PIN(B5),
ASPEED_PINCTRL_PIN(B6),
ASPEED_PINCTRL_PIN(B7),
+ ASPEED_PINCTRL_PIN(B9),
ASPEED_PINCTRL_PIN(C1),
+ ASPEED_PINCTRL_PIN(C10),
ASPEED_PINCTRL_PIN(C11),
ASPEED_PINCTRL_PIN(C12),
+ ASPEED_PINCTRL_PIN(C13),
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
+ ASPEED_PINCTRL_PIN(C16),
ASPEED_PINCTRL_PIN(C17),
+ ASPEED_PINCTRL_PIN(C18),
ASPEED_PINCTRL_PIN(C2),
+ ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(C6),
ASPEED_PINCTRL_PIN(C7),
+ ASPEED_PINCTRL_PIN(C8),
+ ASPEED_PINCTRL_PIN(C9),
ASPEED_PINCTRL_PIN(D1),
+ ASPEED_PINCTRL_PIN(D10),
ASPEED_PINCTRL_PIN(D11),
ASPEED_PINCTRL_PIN(D12),
+ ASPEED_PINCTRL_PIN(D13),
ASPEED_PINCTRL_PIN(D14),
ASPEED_PINCTRL_PIN(D15),
ASPEED_PINCTRL_PIN(D16),
ASPEED_PINCTRL_PIN(D17),
ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D3),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
+ ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
+ ASPEED_PINCTRL_PIN(D8),
+ ASPEED_PINCTRL_PIN(D9),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E11),
ASPEED_PINCTRL_PIN(E12),
+ ASPEED_PINCTRL_PIN(E13),
ASPEED_PINCTRL_PIN(E14),
+ ASPEED_PINCTRL_PIN(E15),
ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E5),
+ ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
+ ASPEED_PINCTRL_PIN(E8),
+ ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F18),
+ ASPEED_PINCTRL_PIN(F20),
ASPEED_PINCTRL_PIN(F3),
ASPEED_PINCTRL_PIN(F4),
ASPEED_PINCTRL_PIN(F5),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G19),
+ ASPEED_PINCTRL_PIN(G20),
ASPEED_PINCTRL_PIN(G5),
ASPEED_PINCTRL_PIN(H1),
+ ASPEED_PINCTRL_PIN(H18),
ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H2),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(J21),
ASPEED_PINCTRL_PIN(J3),
+ ASPEED_PINCTRL_PIN(J4),
+ ASPEED_PINCTRL_PIN(J5),
ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K20),
+ ASPEED_PINCTRL_PIN(K5),
+ ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
+ ASPEED_PINCTRL_PIN(L2),
+ ASPEED_PINCTRL_PIN(L20),
+ ASPEED_PINCTRL_PIN(L21),
ASPEED_PINCTRL_PIN(L22),
+ ASPEED_PINCTRL_PIN(L3),
+ ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(L5),
+ ASPEED_PINCTRL_PIN(M1),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M2),
+ ASPEED_PINCTRL_PIN(M20),
+ ASPEED_PINCTRL_PIN(M21),
+ ASPEED_PINCTRL_PIN(M22),
+ ASPEED_PINCTRL_PIN(M3),
+ ASPEED_PINCTRL_PIN(M4),
+ ASPEED_PINCTRL_PIN(M5),
+ ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
+ ASPEED_PINCTRL_PIN(N2),
+ ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
+ ASPEED_PINCTRL_PIN(N22),
+ ASPEED_PINCTRL_PIN(N3),
+ ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R22),
ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T18),
ASPEED_PINCTRL_PIN(T19),
ASPEED_PINCTRL_PIN(T2),
ASPEED_PINCTRL_PIN(T4),
@@ -979,28 +1907,61 @@ static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(V20),
ASPEED_PINCTRL_PIN(V21),
ASPEED_PINCTRL_PIN(V22),
+ ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(V7),
ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W2),
ASPEED_PINCTRL_PIN(W21),
ASPEED_PINCTRL_PIN(W22),
+ ASPEED_PINCTRL_PIN(W3),
ASPEED_PINCTRL_PIN(W4),
ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(W7),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y21),
ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
ASPEED_PINCTRL_PIN(Y4),
ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
ASPEED_PINCTRL_PIN(Y7),
};
static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
ASPEED_PINCTRL_GROUP(BMCINT),
ASPEED_PINCTRL_GROUP(DDCCLK),
ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(EXTRST),
ASPEED_PINCTRL_GROUP(FLACK),
ASPEED_PINCTRL_GROUP(FLBUSY),
ASPEED_PINCTRL_GROUP(FLWP),
+ ASPEED_PINCTRL_GROUP(GPID),
ASPEED_PINCTRL_GROUP(GPID0),
+ ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
ASPEED_PINCTRL_GROUP(GPIE2),
ASPEED_PINCTRL_GROUP(GPIE4),
@@ -1009,6 +1970,7 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
ASPEED_PINCTRL_GROUP(I2C13),
+ ASPEED_PINCTRL_GROUP(I2C14),
ASPEED_PINCTRL_GROUP(I2C3),
ASPEED_PINCTRL_GROUP(I2C4),
ASPEED_PINCTRL_GROUP(I2C5),
@@ -1018,25 +1980,37 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C9),
ASPEED_PINCTRL_GROUP(LPCPD),
ASPEED_PINCTRL_GROUP(LPCPME),
- ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
ASPEED_PINCTRL_GROUP(NCTS3),
ASPEED_PINCTRL_GROUP(NCTS4),
ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
ASPEED_PINCTRL_GROUP(NDCD3),
ASPEED_PINCTRL_GROUP(NDCD4),
ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NDTS4),
ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
ASPEED_PINCTRL_GROUP(NRI3),
ASPEED_PINCTRL_GROUP(NRI4),
ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -1046,7 +2020,9 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(PWM6),
ASPEED_PINCTRL_GROUP(PWM7),
ASPEED_PINCTRL_GROUP(RGMII1),
+ ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
+ ASPEED_PINCTRL_GROUP(RMII2),
ASPEED_PINCTRL_GROUP(ROM16),
ASPEED_PINCTRL_GROUP(ROM8),
ASPEED_PINCTRL_GROUP(ROMCS1),
@@ -1054,21 +2030,48 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ROMCS3),
ASPEED_PINCTRL_GROUP(ROMCS4),
ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
ASPEED_PINCTRL_GROUP(RXD3),
ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SGPMCK),
ASPEED_PINCTRL_GROUP(SGPMI),
+ ASPEED_PINCTRL_GROUP(SGPMLD),
+ ASPEED_PINCTRL_GROUP(SGPMO),
+ ASPEED_PINCTRL_GROUP(SGPSCK),
+ ASPEED_PINCTRL_GROUP(SGPSI0),
+ ASPEED_PINCTRL_GROUP(SGPSI1),
+ ASPEED_PINCTRL_GROUP(SGPSLD),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
ASPEED_PINCTRL_GROUP(SIOPBI),
ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
+ ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1DEBUG),
+ ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPICS1),
ASPEED_PINCTRL_GROUP(TIMER3),
+ ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
ASPEED_PINCTRL_GROUP(TXD3),
ASPEED_PINCTRL_GROUP(TXD4),
ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
+ ASPEED_PINCTRL_GROUP(VGABIOS_ROM),
ASPEED_PINCTRL_GROUP(VGAHS),
ASPEED_PINCTRL_GROUP(VGAVS),
ASPEED_PINCTRL_GROUP(VPI18),
@@ -1076,17 +2079,40 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(VPI30),
ASPEED_PINCTRL_GROUP(VPO12),
ASPEED_PINCTRL_GROUP(VPO24),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
ASPEED_PINCTRL_FUNC(BMCINT),
ASPEED_PINCTRL_FUNC(DDCCLK),
ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(EXTRST),
ASPEED_PINCTRL_FUNC(FLACK),
ASPEED_PINCTRL_FUNC(FLBUSY),
ASPEED_PINCTRL_FUNC(FLWP),
+ ASPEED_PINCTRL_FUNC(GPID),
ASPEED_PINCTRL_FUNC(GPID0),
+ ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
ASPEED_PINCTRL_FUNC(GPIE2),
ASPEED_PINCTRL_FUNC(GPIE4),
@@ -1095,6 +2121,7 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
ASPEED_PINCTRL_FUNC(I2C13),
+ ASPEED_PINCTRL_FUNC(I2C14),
ASPEED_PINCTRL_FUNC(I2C3),
ASPEED_PINCTRL_FUNC(I2C4),
ASPEED_PINCTRL_FUNC(I2C5),
@@ -1104,24 +2131,37 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C9),
ASPEED_PINCTRL_FUNC(LPCPD),
ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
ASPEED_PINCTRL_FUNC(NCTS3),
ASPEED_PINCTRL_FUNC(NCTS4),
ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
ASPEED_PINCTRL_FUNC(NDCD3),
ASPEED_PINCTRL_FUNC(NDCD4),
ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NDTS4),
ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
ASPEED_PINCTRL_FUNC(NRI3),
ASPEED_PINCTRL_FUNC(NRI4),
ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -1131,7 +2171,9 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(PWM6),
ASPEED_PINCTRL_FUNC(PWM7),
ASPEED_PINCTRL_FUNC(RGMII1),
+ ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
+ ASPEED_PINCTRL_FUNC(RMII2),
ASPEED_PINCTRL_FUNC(ROM16),
ASPEED_PINCTRL_FUNC(ROM8),
ASPEED_PINCTRL_FUNC(ROMCS1),
@@ -1139,21 +2181,48 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ROMCS3),
ASPEED_PINCTRL_FUNC(ROMCS4),
ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
ASPEED_PINCTRL_FUNC(RXD3),
ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SGPMCK),
ASPEED_PINCTRL_FUNC(SGPMI),
+ ASPEED_PINCTRL_FUNC(SGPMLD),
+ ASPEED_PINCTRL_FUNC(SGPMO),
+ ASPEED_PINCTRL_FUNC(SGPSCK),
+ ASPEED_PINCTRL_FUNC(SGPSI0),
+ ASPEED_PINCTRL_FUNC(SGPSI1),
+ ASPEED_PINCTRL_FUNC(SGPSLD),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
ASPEED_PINCTRL_FUNC(SIOPBI),
ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
+ ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1DEBUG),
+ ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPICS1),
ASPEED_PINCTRL_FUNC(TIMER3),
+ ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
ASPEED_PINCTRL_FUNC(TXD3),
ASPEED_PINCTRL_FUNC(TXD4),
ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
+ ASPEED_PINCTRL_FUNC(VGABIOS_ROM),
ASPEED_PINCTRL_FUNC(VGAHS),
ASPEED_PINCTRL_FUNC(VGAVS),
ASPEED_PINCTRL_FUNC(VPI18),
@@ -1161,6 +2230,8 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(VPI30),
ASPEED_PINCTRL_FUNC(VPO12),
ASPEED_PINCTRL_FUNC(VPO24),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g4_pinctrl_data = {
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v3 1/4] pinctrl: aspeed: Read and write bits in LPC and GFX controllers
From: Andrew Jeffery @ 2016-12-06 3:11 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Joel Stanley,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20161206031152.3004-1-andrew-zrmu5oMJ5Fs@public.gmane.org>
The System Control Unit IP block in the Aspeed SoCs is typically where
the pinmux configuration is found, but not always. A number of pins
depend on state in one of LPC Host Control (LHC) or SoC Display
Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the
means to adjust these as necessary.
We use syscon to cast a regmap over the GFX and LPC blocks, which is
used as an arbitration layer between the relevant driver and the pinctrl
subsystem. The regmaps are then exposed to the SoC-specific pinctrl
drivers by phandles in the devicetree, and are selected during a mux
request by querying a new 'ip' member in struct aspeed_sig_desc.
Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
---
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 50 ++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 18 +--
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 48 ++++--
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 161 +++++++++++++--------
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 32 ++--
5 files changed, 214 insertions(+), 95 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 2ad18c4ea55c..115b0cce6c1c 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -4,12 +4,19 @@ Aspeed Pin Controllers
The Aspeed SoCs vary in functionality inside a generation but have a common mux
device register layout.
-Required properties:
-- compatible : Should be any one of the following:
- "aspeed,ast2400-pinctrl"
- "aspeed,g4-pinctrl"
- "aspeed,ast2500-pinctrl"
- "aspeed,g5-pinctrl"
+Required properties for g4:
+- compatible : Should be any one of the following:
+ "aspeed,ast2400-pinctrl"
+ "aspeed,g4-pinctrl"
+
+Required properties for g5:
+- compatible : Should be any one of the following:
+ "aspeed,ast2500-pinctrl"
+ "aspeed,g5-pinctrl"
+
+- aspeed,external-nodes: A cell of phandles to external controller nodes:
+ 0: compatible with "aspeed,ast2500-gfx", "syscon"
+ 1: compatible with "aspeed,ast2500-lpchc", "syscon"
The pin controller node should be a child of a syscon node with the required
property:
@@ -47,7 +54,7 @@ RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
TIMER7 TIMER8 VGABIOSROM
-Examples:
+g4 Example:
syscon: scu@1e6e2000 {
compatible = "syscon", "simple-mfd";
@@ -63,5 +70,34 @@ syscon: scu@1e6e2000 {
};
};
+g5 Example:
+
+apb {
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ };
+
+ lpchc: lpchc@1e7890a0 {
+ compatible = "aspeed,ast2500-lpchc", "syscon";
+ reg = <0x1e7890a0 0xc4>;
+ };
+
+ syscon: scu@1e6e2000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g5-pinctrl";
+ aspeed,external-nodes = <&gfx, &lpchc>;
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+ };
+ };
+};
+
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices.
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index a21b071ff290..558bd102416c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -292,7 +292,7 @@ SSSF_PIN_DECL(U18, GPIOG7, FLWP, SIG_DESC_SET(SCU84, 7));
#define UART6_DESC SIG_DESC_SET(SCU90, 7)
#define ROM16_DESC SIG_DESC_SET(SCU90, 6)
#define FLASH_WIDE SIG_DESC_SET(HW_STRAP1, 4)
-#define BOOT_SRC_NOR { HW_STRAP1, GENMASK(1, 0), 0, 0 }
+#define BOOT_SRC_NOR { ASPEED_IP_SCU, HW_STRAP1, GENMASK(1, 0), 0, 0 }
#define A8 56
SIG_EXPR_DECL(ROMD8, ROM16, ROM16_DESC);
@@ -418,9 +418,9 @@ FUNC_GROUP_DECL(I2C8, G5, F3);
#define U1 88
SSSF_PIN_DECL(U1, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
-#define VPI18_DESC { SCU90, GENMASK(5, 4), 1, 0 }
-#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
-#define VPI30_DESC { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPI18_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
+#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
+#define VPI30_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
#define T5 89
#define T5_DESC SIG_DESC_SET(SCU84, 17)
@@ -641,11 +641,11 @@ SSSF_PIN_DECL(Y22, GPIOR2, ROMCS3, SIG_DESC_SET(SCU88, 26));
#define U19 139
SSSF_PIN_DECL(U19, GPIOR3, ROMCS4, SIG_DESC_SET(SCU88, 27));
-#define VPOOFF0_DESC { SCU94, GENMASK(1, 0), 0, 0 }
-#define VPO12_DESC { SCU94, GENMASK(1, 0), 1, 0 }
-#define VPO24_DESC { SCU94, GENMASK(1, 0), 2, 0 }
-#define VPOOFF1_DESC { SCU94, GENMASK(1, 0), 3, 0 }
-#define VPO_OFF_12 { SCU94, 0x2, 0, 0 }
+#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define VPO12_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
+#define VPO24_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
+#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
+#define VPO_OFF_12 { ASPEED_IP_SCU, SCU94, 0x2, 0, 0 }
#define VPO_24_OFF SIG_DESC_SET(SCU94, 1)
#define V21 140
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 87b46390b695..c5c9a1b6fa1c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -26,8 +27,8 @@
#define ASPEED_G5_NR_PINS 228
-#define COND1 { SCU90, BIT(6), 0, 0 }
-#define COND2 { SCU94, GENMASK(1, 0), 0, 0 }
+#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
+#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
#define B14 0
SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
@@ -186,9 +187,12 @@ MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
FUNC_GROUP_DECL(GPIE0, B20, C20);
-#define SPI1_DESC { HW_STRAP1, GENMASK(13, 12), 1, 0 }
-#define SPI1DEBUG_DESC { HW_STRAP1, GENMASK(13, 12), 2, 0 }
-#define SPI1PASSTHRU_DESC { HW_STRAP1, GENMASK(13, 12), 3, 0 }
+#define SPI1_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
#define C18 64
SIG_EXPR_DECL(SYSCS, SPI1DEBUG, COND1, SPI1DEBUG_DESC);
@@ -325,10 +329,11 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
FUNC_GROUP_DECL(I2C8, P2, R1);
-#define VPIOFF0_DESC { SCU90, GENMASK(5, 4), 0, 0 }
-#define VPIOFF1_DESC { SCU90, GENMASK(5, 4), 1, 0 }
-#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
-#define VPIRSVD_DESC { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
+#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
+#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
+#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
+
#define V2 104
#define V2_DESC SIG_DESC_SET(SCU88, 0)
@@ -848,10 +853,35 @@ static struct pinctrl_desc aspeed_g5_pinctrl_desc = {
static int aspeed_g5_pinctrl_probe(struct platform_device *pdev)
{
int i;
+ struct regmap *map;
+ struct device_node *node;
for (i = 0; i < ARRAY_SIZE(aspeed_g5_pins); i++)
aspeed_g5_pins[i].number = i;
+ node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 0);
+ map = syscon_node_to_regmap(node);
+ of_node_put(node);
+ if (IS_ERR(map)) {
+ dev_warn(&pdev->dev, "No GFX phandle found, some mux configurations may fail\n");
+ map = NULL;
+ }
+ aspeed_g5_pinctrl_data.maps[ASPEED_IP_GFX] = map;
+
+ node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 1);
+ if (node) {
+ map = syscon_node_to_regmap(node->parent);
+ if (IS_ERR(map)) {
+ dev_warn(&pdev->dev, "LHC parent is not a syscon, some mux configurations may fail\n");
+ map = NULL;
+ }
+ } else {
+ dev_warn(&pdev->dev, "No LHC phandle found, some mux configurations may fail\n");
+ map = NULL;
+ }
+ of_node_put(node);
+ aspeed_g5_pinctrl_data.maps[ASPEED_IP_LPC] = map;
+
return aspeed_pinctrl_probe(pdev, &aspeed_g5_pinctrl_desc,
&aspeed_g5_pinctrl_data);
}
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 49aeba912531..782c5c97f853 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -14,6 +14,12 @@
#include "../core.h"
#include "pinctrl-aspeed.h"
+static const char *const aspeed_pinmux_ips[] = {
+ [ASPEED_IP_SCU] = "SCU",
+ [ASPEED_IP_GFX] = "GFX",
+ [ASPEED_IP_LPC] = "LPC",
+};
+
int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -78,7 +84,8 @@ int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
static inline void aspeed_sig_desc_print_val(
const struct aspeed_sig_desc *desc, bool enable, u32 rv)
{
- pr_debug("SCU%x[0x%08x]=0x%x, got 0x%x from 0x%08x\n", desc->reg,
+ pr_debug("Want %s%X[0x%08X]=0x%X, got 0x%X from 0x%08X\n",
+ aspeed_pinmux_ips[desc->ip], desc->reg,
desc->mask, enable ? desc->enable : desc->disable,
(rv & desc->mask) >> __ffs(desc->mask), rv);
}
@@ -88,10 +95,11 @@ static inline void aspeed_sig_desc_print_val(
*
* @desc: The signal descriptor of interest
* @enabled: True to query the enabled state, false to query disabled state
- * @regmap: The SCU regmap instance
+ * @regmap: The IP block's regmap instance
*
- * @return True if the descriptor's bitfield is configured to the state
- * selected by @enabled, false otherwise
+ * @return 1 if the descriptor's bitfield is configured to the state
+ * selected by @enabled, 0 if not, and less than zero if an unrecoverable
+ * failure occurred
*
* Evaluation of descriptor state is non-trivial in that it is not a binary
* outcome: The bitfields can be greater than one bit in size and thus can take
@@ -99,14 +107,19 @@ static inline void aspeed_sig_desc_print_val(
* descriptor (typically this means a different function to the one of interest
* is enabled). Thus we must explicitly test for either condition as required.
*/
-static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
+static int aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
bool enabled, struct regmap *map)
{
+ int ret;
unsigned int raw;
u32 want;
- if (regmap_read(map, desc->reg, &raw) < 0)
- return false;
+ if (!map)
+ return -ENODEV;
+
+ ret = regmap_read(map, desc->reg, &raw);
+ if (ret)
+ return ret;
aspeed_sig_desc_print_val(desc, enabled, raw);
want = enabled ? desc->enable : desc->disable;
@@ -119,10 +132,10 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
*
* @expr: An expression controlling the signal for a mux function on a pin
* @enabled: True to query the enabled state, false to query disabled state
- * @regmap: The SCU regmap instance
+ * @maps: The list of regmap instances
*
- * @return True if the expression composed by @enabled evaluates true, false
- * otherwise
+ * @return 1 if the expression composed by @enabled evaluates true, 0 if not,
+ * and less than zero if an unrecoverable failure occurred.
*
* A mux function is enabled or disabled if the function's signal expression
* for each pin in the function's pin group evaluates true for the desired
@@ -135,19 +148,21 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
* neither the enabled nor disabled state. Thus we must explicitly test for
* either condition as required.
*/
-static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
- bool enabled, struct regmap *map)
+static int aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
+ bool enabled, struct regmap * const *maps)
{
int i;
+ int ret;
for (i = 0; i < expr->ndescs; i++) {
const struct aspeed_sig_desc *desc = &expr->descs[i];
- if (!aspeed_sig_desc_eval(desc, enabled, map))
- return false;
+ ret = aspeed_sig_desc_eval(desc, enabled, maps[desc->ip]);
+ if (ret <= 0)
+ return ret;
}
- return true;
+ return 1;
}
/**
@@ -158,19 +173,24 @@ static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
* configured
* @enable: true to enable an function's signal through a pin's signal
* expression, false to disable the function's signal
- * @map: The SCU's regmap instance for pinmux register access.
+ * @maps: The list of regmap instances for pinmux register access.
*
- * @return true if the expression is configured as requested, false otherwise
+ * @return 0 if the expression is configured as requested and a negative error
+ * code otherwise
*/
-static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
- bool enable, struct regmap *map)
+static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
+ bool enable, struct regmap * const *maps)
{
+ int ret;
int i;
for (i = 0; i < expr->ndescs; i++) {
- bool ret;
const struct aspeed_sig_desc *desc = &expr->descs[i];
u32 pattern = enable ? desc->enable : desc->disable;
+ u32 val = (pattern << __ffs(desc->mask));
+
+ if (!maps[desc->ip])
+ return -ENODEV;
/*
* Strap registers are configured in hardware or by early-boot
@@ -179,64 +199,79 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
* deconfigured and is the reason we re-evaluate after writing
* all descriptor bits.
*/
- if (desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2)
+ if ((desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2) &&
+ desc->ip == ASPEED_IP_SCU)
continue;
- ret = regmap_update_bits(map, desc->reg, desc->mask,
- pattern << __ffs(desc->mask)) == 0;
+ ret = regmap_update_bits(maps[desc->ip], desc->reg,
+ desc->mask, val);
- if (!ret)
+ if (ret)
return ret;
}
- return aspeed_sig_expr_eval(expr, enable, map);
+ ret = aspeed_sig_expr_eval(expr, enable, maps);
+ if (ret < 0)
+ return ret;
+
+ if (!ret)
+ return -EPERM;
+
+ return 0;
}
-static bool aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
- struct regmap *map)
+static int aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
+ struct regmap * const *maps)
{
- if (aspeed_sig_expr_eval(expr, true, map))
- return true;
+ int ret;
+
+ ret = aspeed_sig_expr_eval(expr, true, maps);
+ if (ret < 0)
+ return ret;
- return aspeed_sig_expr_set(expr, true, map);
+ if (!ret)
+ return aspeed_sig_expr_set(expr, true, maps);
+
+ return 0;
}
-static bool aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
- struct regmap *map)
+static int aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
+ struct regmap * const *maps)
{
- if (!aspeed_sig_expr_eval(expr, true, map))
- return true;
+ int ret;
+
+ ret = aspeed_sig_expr_eval(expr, true, maps);
+ if (ret < 0)
+ return ret;
+
+ if (ret)
+ return aspeed_sig_expr_set(expr, false, maps);
- return aspeed_sig_expr_set(expr, false, map);
+ return 0;
}
/**
* Disable a signal on a pin by disabling all provided signal expressions.
*
* @exprs: The list of signal expressions (from a priority level on a pin)
- * @map: The SCU's regmap instance for pinmux register access.
+ * @maps: The list of regmap instances for pinmux register access.
*
- * @return true if all expressions in the list are successfully disabled, false
- * otherwise
+ * @return 0 if all expressions are disabled, otherwise a negative error code
*/
-static bool aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
- struct regmap *map)
+static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
+ struct regmap * const *maps)
{
- bool disabled = true;
+ int ret = 0;
if (!exprs)
return true;
- while (*exprs) {
- bool ret;
-
- ret = aspeed_sig_expr_disable(*exprs, map);
- disabled = disabled && ret;
-
+ while (*exprs && !ret) {
+ ret = aspeed_sig_expr_disable(*exprs, maps);
exprs++;
}
- return disabled;
+ return ret;
}
/**
@@ -330,6 +365,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
unsigned int group)
{
int i;
+ int ret;
const struct aspeed_pinctrl_data *pdata =
pinctrl_dev_get_drvdata(pctldev);
const struct aspeed_pin_group *pgroup = &pdata->groups[group];
@@ -343,6 +379,8 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
const struct aspeed_sig_expr **funcs;
const struct aspeed_sig_expr ***prios;
+ pr_debug("Muxing pin %d for %s\n", pin, pfunc->name);
+
if (!pdesc)
return -EINVAL;
@@ -358,8 +396,9 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
if (expr)
break;
- if (!aspeed_disable_sig(funcs, pdata->map))
- return -EPERM;
+ ret = aspeed_disable_sig(funcs, pdata->maps);
+ if (ret)
+ return ret;
prios++;
}
@@ -377,8 +416,9 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
return -ENXIO;
}
- if (!aspeed_sig_expr_enable(expr, pdata->map))
- return -EPERM;
+ ret = aspeed_sig_expr_enable(expr, pdata->maps);
+ if (ret)
+ return ret;
}
return 0;
@@ -414,6 +454,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
+ int ret;
const struct aspeed_pinctrl_data *pdata =
pinctrl_dev_get_drvdata(pctldev);
const struct aspeed_pin_desc *pdesc = pdata->pins[offset].drv_data;
@@ -432,8 +473,9 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
if (aspeed_gpio_in_exprs(funcs))
break;
- if (!aspeed_disable_sig(funcs, pdata->map))
- return -EPERM;
+ ret = aspeed_disable_sig(funcs, pdata->maps);
+ if (ret)
+ return ret;
prios++;
}
@@ -462,10 +504,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
* If GPIO is not the lowest priority signal type, assume there is only
* one expression defined to enable the GPIO function
*/
- if (!aspeed_sig_expr_enable(expr, pdata->map))
- return -EPERM;
-
- return 0;
+ return aspeed_sig_expr_enable(expr, pdata->maps);
}
int aspeed_pinctrl_probe(struct platform_device *pdev,
@@ -481,10 +520,10 @@ int aspeed_pinctrl_probe(struct platform_device *pdev,
return -ENODEV;
}
- pdata->map = syscon_node_to_regmap(parent->of_node);
- if (IS_ERR(pdata->map)) {
+ pdata->maps[ASPEED_IP_SCU] = syscon_node_to_regmap(parent->of_node);
+ if (IS_ERR(pdata->maps[ASPEED_IP_SCU])) {
dev_err(&pdev->dev, "No regmap for syscon pincontroller parent\n");
- return PTR_ERR(pdata->map);
+ return PTR_ERR(pdata->maps[ASPEED_IP_SCU]);
}
pctl = pinctrl_register(pdesc, &pdev->dev, pdata);
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 3e72ef8c54bf..0e93cbf2ff33 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -232,6 +232,11 @@
* group.
*/
+#define ASPEED_IP_SCU 0
+#define ASPEED_IP_GFX 1
+#define ASPEED_IP_LPC 2
+#define ASPEED_NR_PINMUX_IPS 3
+
/*
* The "Multi-function Pins Mapping and Control" table in the SoC datasheet
* references registers by the device/offset mnemonic. The register macros
@@ -261,7 +266,9 @@
* A signal descriptor, which describes the register, bits and the
* enable/disable values that should be compared or written.
*
- * @reg: The register offset from base in bytes
+ * @ip: The IP block identifier, used as an index into the regmap array in
+ * struct aspeed_pinctrl_data
+ * @reg: The register offset with respect to the base address of the IP block
* @mask: The mask to apply to the register. The lowest set bit of the mask is
* used to derive the shift value.
* @enable: The value that enables the function. Value should be in the LSBs,
@@ -270,6 +277,7 @@
* LSBs, not at the position of the mask.
*/
struct aspeed_sig_desc {
+ unsigned int ip;
unsigned int reg;
u32 mask;
u32 enable;
@@ -313,24 +321,30 @@ struct aspeed_pin_desc {
/* Macro hell */
+#define SIG_DESC_IP_BIT(ip, reg, idx, val) \
+ { ip, reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
+
/**
- * Short-hand macro for describing a configuration enabled by the state of one
- * bit. The disable value is derived.
+ * Short-hand macro for describing an SCU descriptor enabled by the state of
+ * one bit. The disable value is derived.
*
* @reg: The signal's associated register, offset from base
* @idx: The signal's bit index in the register
* @val: The value (0 or 1) that enables the function
*/
#define SIG_DESC_BIT(reg, idx, val) \
- { reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
+ SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, val)
+
+#define SIG_DESC_IP_SET(ip, reg, idx) SIG_DESC_IP_BIT(ip, reg, idx, 1)
/**
- * A further short-hand macro describing a configuration enabled with a set bit.
+ * A further short-hand macro expanding to an SCU descriptor enabled by a set
+ * bit.
*
- * @reg: The configuration's associated register, offset from base
- * @idx: The configuration's bit index in the register
+ * @reg: The register, offset from base
+ * @idx: The bit index in the register
*/
-#define SIG_DESC_SET(reg, idx) SIG_DESC_BIT(reg, idx, 1)
+#define SIG_DESC_SET(reg, idx) SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, 1)
#define SIG_DESC_LIST_SYM(sig, func) sig_descs_ ## sig ## _ ## func
#define SIG_DESC_LIST_DECL(sig, func, ...) \
@@ -500,7 +514,7 @@ struct aspeed_pin_desc {
MS_PIN_DECL_(pin, SIG_EXPR_LIST_PTR(gpio))
struct aspeed_pinctrl_data {
- struct regmap *map;
+ struct regmap *maps[ASPEED_NR_PINMUX_IPS];
const struct pinctrl_pin_desc *pins;
const unsigned int npins;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox