* Re: [PATCH net-next v3 0/4] Fix OdroidC2 Gigabit Tx link issue
From: Martin Blumenstingl @ 2016-12-18 13:37 UTC (permalink / raw)
To: Florian Fainelli, jbrunet
Cc: David Miller, netdev, devicetree, carlo, khilman, peppe.cavallaro,
alexandre.torgue, neolynx, andrew, narmstrong, linux-amlogic,
linux-arm-kernel, linux-kernel
In-Reply-To: <162595c2-d403-0070-3399-de03c1653065@gmail.com>
Hi Florian, Hi Jerome,
On Wed, Nov 30, 2016 at 2:15 AM, Florian Fainelli <f.fainelli@gmail.com> wrote:
> On 11/29/2016 05:13 PM, David Miller wrote:
>> From: Florian Fainelli <f.fainelli@gmail.com>
>> Date: Tue, 29 Nov 2016 16:43:20 -0800
>>
>>> On 11/29/2016 04:38 PM, David Miller wrote:
>>>> From: Jerome Brunet <jbrunet@baylibre.com>
>>>> Date: Mon, 28 Nov 2016 10:46:45 +0100
>>>>
>>>>> This patchset fixes an issue with the OdroidC2 board (DWMAC + RTL8211F).
>>>>> The platform seems to enter LPI on the Rx path too often while performing
>>>>> relatively high TX transfer. This eventually break the link (both Tx and
>>>>> Rx), and require to bring the interface down and up again to get the Rx
>>>>> path working again.
>>>>>
>>>>> The root cause of this issue is not fully understood yet but disabling EEE
>>>>> advertisement on the PHY prevent this feature to be negotiated.
>>>>> With this change, the link is stable and reliable, with the expected
>>>>> throughput performance.
>>>>>
>>>>> The patchset adds options in the generic phy driver to disable EEE
>>>>> advertisement, through device tree. The way it is done is very similar
>>>>> to the handling of the max-speed property.
>>>>
>>>> Patches 1-3 applied to net-next, thanks.
>>>
>>> Meh, there was a v4 submitted shortly after, and I objected to the whole
>>> idea of using that kind of Device Tree properties to disable EEE, we can
>>> send reverts though..
>>
>> Sorry, I lost this in all the discussion, I can revert.
>
> Yeah, I can understand why, these freaking PHYs tend to generate a lot
> of noise and discussion...
>
>>
>> Just send me a revert of the entire merge commit
>> a152c91889556df17ca6d8ea134fb2cb4ac9f893 with a short
>> description of why and I'll apply it.
>
> OK, I will talk with Jerome first to make sure that we are in agreement
> with the solution to deploy to fix the OdroidC2 problem first.
simply because I'm curious: what was the outcome of your discussion?
can we stay with the current solution or are any changes required?
Regards,
Martin
^ permalink raw reply
* [PATCH pci/next] PCI: rcar: Add compatible string for r8a7796
From: Yoshihiro Kaneko @ 2016-12-18 12:27 UTC (permalink / raw)
To: linux-pci
Cc: Bjorn Helgaas, Simon Horman, Magnus Damm, linux-renesas-soc,
devicetree
From: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
This patch adds support for r8a7796.
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
This patch is based on the next branch of the pci tree.
Documentation/devicetree/bindings/pci/rcar-pci.txt | 1 +
drivers/pci/host/pcie-rcar.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index eee518d..34712d6 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -6,6 +6,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
"renesas,pcie-r8a7791" for the R8A7791 SoC;
"renesas,pcie-r8a7793" for the R8A7793 SoC;
"renesas,pcie-r8a7795" for the R8A7795 SoC;
+ "renesas,pcie-r8a7796" for the R8A7796 SoC;
"renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
"renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index aca85be..02e5777 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -1078,6 +1078,7 @@ static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie,
{ .compatible = "renesas,pcie-rcar-gen2",
.data = rcar_pcie_hw_init_gen2 },
{ .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init },
+ { .compatible = "renesas,pcie-r8a7796", .data = rcar_pcie_hw_init },
{ .compatible = "renesas,pcie-rcar-gen3", .data = rcar_pcie_hw_init },
{},
};
--
1.9.1
^ permalink raw reply related
* Re: [PATCH v4 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings
From: Archit Taneja @ 2016-12-18 11:17 UTC (permalink / raw)
To: Rob Herring; +Cc: laurent.pinchart, linux-arm-msm, dri-devel, devicetree
In-Reply-To: <20161209221124.rkntcdbgj36hlgul@rob-hp-laptop>
On 12/10/2016 3:41 AM, Rob Herring wrote:
> On Mon, Dec 05, 2016 at 01:23:54PM +0530, Archit Taneja wrote:
>> Add the regulator supply properties needed by ADV7511 and ADV7533.
>>
>> Cc: devicetree@vger.kernel.org
>> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> Signed-off-by: Archit Taneja <architt@codeaurora.org>
>> ---
>> Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>
> Didn't I ack this already? Anyway,
You had Acked it before. This set moved the regulator bindings from
optional to mandatory, so I thought it may need you review again.
Mark Brown insisted that we have a regulator supply per pin even if
the chip's specs recommend using a common supply for them, so I'm
going to bring that back again. I'll keep your Ack for the next
revision since that's something you'd originally recommended.
Thanks,
Archit
>
> Acked-by: Rob Herring <robh@kernel.org>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply
* [PATCH v6 6/6] [media] rc: add support for IR LEDs driven through SPI
From: Andi Shyti @ 2016-12-18 11:11 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Sean Young, Rob Herring, Mark Rutland,
Richard Purdie, Jacek Anaszewski, Heiner Kallweit
Cc: linux-media, devicetree, linux-leds, linux-kernel, Andi Shyti,
Andi Shyti
In-Reply-To: <20161218111138.12831-1-andi.shyti@samsung.com>
The ir-spi is a simple device driver which supports the
connection between an IR LED and the MOSI line of an SPI device.
The driver, indeed, uses the SPI framework to stream the raw data
provided by userspace through an rc character device. The chardev
is handled by the LIRC framework and its functionality basically
provides:
- write: the driver gets a pulse/space signal and translates it
to a binary signal that will be streamed to the IR led through
the SPI framework.
- set frequency: sets the frequency whith which the data should
be sent. This is handle with ioctl with the
LIRC_SET_SEND_CARRIER flag (as per lirc documentation)
- set duty cycle: this is also handled with ioctl with the
LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles
of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data.
The character device is created under /dev/lircX name, where X is
and ID assigned by the LIRC framework.
Example of usage:
fd = open("/dev/lirc0", O_RDWR);
if (fd < 0)
return -1;
val = 608000;
ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val);
if (ret < 0)
return -1;
val = 60;
ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val);
if (ret < 0)
return -1;
n = write(fd, buffer, BUF_LEN);
if (n < 0 || n != BUF_LEN)
ret = -1;
close(fd);
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Sean Young <sean@mess.org>
---
drivers/media/rc/Kconfig | 9 +++
drivers/media/rc/Makefile | 1 +
drivers/media/rc/ir-spi.c | 199 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 209 insertions(+)
create mode 100644 drivers/media/rc/ir-spi.c
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 629e8ca15ab3..3351e25d6176 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -261,6 +261,15 @@ config IR_REDRAT3
To compile this driver as a module, choose M here: the
module will be called redrat3.
+config IR_SPI
+ tristate "SPI connected IR LED"
+ depends on SPI && LIRC
+ ---help---
+ Say Y if you want to use an IR LED connected through SPI bus.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ir-spi.
+
config IR_STREAMZAP
tristate "Streamzap PC Remote IR Receiver"
depends on USB_ARCH_HAS_HCD
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 3a984ee301e2..938c98b82b22 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
obj-$(CONFIG_IR_ENE) += ene_ir.o
obj-$(CONFIG_IR_REDRAT3) += redrat3.o
obj-$(CONFIG_IR_RX51) += ir-rx51.o
+obj-$(CONFIG_IR_SPI) += ir-spi.o
obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
diff --git a/drivers/media/rc/ir-spi.c b/drivers/media/rc/ir-spi.c
new file mode 100644
index 000000000000..d45c60352093
--- /dev/null
+++ b/drivers/media/rc/ir-spi.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Author: Andi Shyti <andi.shyti@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * SPI driven IR LED device driver
+ */
+
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <media/rc-core.h>
+
+#define IR_SPI_DRIVER_NAME "ir-spi"
+
+/* pulse value for different duty cycles */
+#define IR_SPI_PULSE_DC_50 0xff00
+#define IR_SPI_PULSE_DC_60 0xfc00
+#define IR_SPI_PULSE_DC_70 0xf800
+#define IR_SPI_PULSE_DC_75 0xf000
+#define IR_SPI_PULSE_DC_80 0xc000
+#define IR_SPI_PULSE_DC_90 0x8000
+
+#define IR_SPI_DEFAULT_FREQUENCY 38000
+#define IR_SPI_BIT_PER_WORD 8
+#define IR_SPI_MAX_BUFSIZE 4096
+
+struct ir_spi_data {
+ u32 freq;
+ u8 duty_cycle;
+ bool negated;
+
+ u16 tx_buf[IR_SPI_MAX_BUFSIZE];
+ u16 pulse;
+ u16 space;
+
+ struct rc_dev *rc;
+ struct spi_device *spi;
+ struct regulator *regulator;
+};
+
+static int ir_spi_tx(struct rc_dev *dev,
+ unsigned int *buffer, unsigned int count)
+{
+ int i;
+ int ret;
+ unsigned int len = 0;
+ struct ir_spi_data *idata = dev->priv;
+ struct spi_transfer xfer;
+
+ /* convert the pulse/space signal to raw binary signal */
+ for (i = 0; i < count; i++) {
+ int j;
+ u16 val = ((i+1) % 2) ? idata->pulse : idata->space;
+
+ if (len + buffer[i] >= IR_SPI_MAX_BUFSIZE)
+ return -EINVAL;
+
+ /*
+ * the first value in buffer is a pulse, so that 0, 2, 4, ...
+ * contain a pulse duration. On the contrary, 1, 3, 5, ...
+ * contain a space duration.
+ */
+ val = (i % 2) ? idata->space : idata->pulse;
+ for (j = 0; j < buffer[i]; j++)
+ idata->tx_buf[len++] = val;
+ }
+
+ memset(&xfer, 0, sizeof(xfer));
+
+ xfer.speed_hz = idata->freq;
+ xfer.len = len * sizeof(*idata->tx_buf);
+ xfer.tx_buf = idata->tx_buf;
+
+ ret = regulator_enable(idata->regulator);
+ if (ret)
+ return ret;
+
+ ret = spi_sync_transfer(idata->spi, &xfer, 1);
+ if (ret)
+ dev_err(&idata->spi->dev, "unable to deliver the signal\n");
+
+ regulator_disable(idata->regulator);
+
+ return ret ? ret : count;
+}
+
+static int ir_spi_set_tx_carrier(struct rc_dev *dev, u32 carrier)
+{
+ struct ir_spi_data *idata = dev->priv;
+
+ if (!carrier)
+ return -EINVAL;
+
+ idata->freq = carrier;
+
+ return 0;
+}
+
+static int ir_spi_set_duty_cycle(struct rc_dev *dev, u32 duty_cycle)
+{
+ struct ir_spi_data *idata = dev->priv;
+
+ if (duty_cycle >= 90)
+ idata->pulse = IR_SPI_PULSE_DC_90;
+ else if (duty_cycle >= 80)
+ idata->pulse = IR_SPI_PULSE_DC_80;
+ else if (duty_cycle >= 75)
+ idata->pulse = IR_SPI_PULSE_DC_75;
+ else if (duty_cycle >= 70)
+ idata->pulse = IR_SPI_PULSE_DC_70;
+ else if (duty_cycle >= 60)
+ idata->pulse = IR_SPI_PULSE_DC_60;
+ else
+ idata->pulse = IR_SPI_PULSE_DC_50;
+
+ if (idata->negated) {
+ idata->pulse = ~idata->pulse;
+ idata->space = 0xffff;
+ } else {
+ idata->space = 0;
+ }
+
+ return 0;
+}
+
+static int ir_spi_probe(struct spi_device *spi)
+{
+ int ret;
+ u8 dc;
+ struct ir_spi_data *idata;
+
+ idata = devm_kzalloc(&spi->dev, sizeof(*idata), GFP_KERNEL);
+ if (!idata)
+ return -ENOMEM;
+
+ idata->regulator = devm_regulator_get(&spi->dev, "irda_regulator");
+ if (IS_ERR(idata->regulator))
+ return PTR_ERR(idata->regulator);
+
+ idata->rc = devm_rc_allocate_device(&spi->dev, RC_DRIVER_IR_RAW_TX);
+ if (!idata->rc)
+ return -ENOMEM;
+
+ idata->rc->tx_ir = ir_spi_tx;
+ idata->rc->s_tx_carrier = ir_spi_set_tx_carrier;
+ idata->rc->s_tx_duty_cycle = ir_spi_set_duty_cycle;
+ idata->rc->driver_name = IR_SPI_DRIVER_NAME;
+ idata->rc->priv = idata;
+ idata->spi = spi;
+
+ idata->negated = of_property_read_bool(spi->dev.of_node,
+ "led-active-low");
+ ret = of_property_read_u8(spi->dev.of_node, "duty-cycle", &dc);
+ if (ret)
+ dc = 50;
+
+ /* ir_spi_set_duty_cycle cannot fail,
+ * it returns int to be compatible with the
+ * rc->s_tx_duty_cycle function
+ */
+ ir_spi_set_duty_cycle(idata->rc, dc);
+
+ idata->freq = IR_SPI_DEFAULT_FREQUENCY;
+
+ return devm_rc_register_device(&spi->dev, idata->rc);
+}
+
+static int ir_spi_remove(struct spi_device *spi)
+{
+ return 0;
+}
+
+static const struct of_device_id ir_spi_of_match[] = {
+ { .compatible = "ir-spi-led" },
+ {},
+};
+
+static struct spi_driver ir_spi_driver = {
+ .probe = ir_spi_probe,
+ .remove = ir_spi_remove,
+ .driver = {
+ .name = IR_SPI_DRIVER_NAME,
+ .of_match_table = ir_spi_of_match,
+ },
+};
+
+module_spi_driver(ir_spi_driver);
+
+MODULE_AUTHOR("Andi Shyti <andi.shyti@samsung.com>");
+MODULE_DESCRIPTION("SPI IR LED");
+MODULE_LICENSE("GPL v2");
--
2.11.0
^ permalink raw reply related
* [PATCH v6 5/6] Documentation: bindings: add documentation for ir-spi device driver
From: Andi Shyti @ 2016-12-18 11:11 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Sean Young, Rob Herring, Mark Rutland,
Richard Purdie, Jacek Anaszewski, Heiner Kallweit
Cc: linux-media, devicetree, linux-leds, linux-kernel, Andi Shyti,
Andi Shyti
In-Reply-To: <20161218111138.12831-1-andi.shyti@samsung.com>
Document the ir-spi driver's binding which is a IR led driven
through the SPI line.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Sean Young <sean@mess.org>
---
.../devicetree/bindings/leds/irled/spi-ir-led.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
new file mode 100644
index 000000000000..896b6997cf30
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
@@ -0,0 +1,29 @@
+Device tree bindings for IR LED connected through SPI bus which is used as
+remote controller.
+
+The IR LED switch is connected to the MOSI line of the SPI device and the data
+are delivered thourgh that.
+
+Required properties:
+ - compatible: should be "ir-spi-led".
+
+Optional properties:
+ - duty-cycle: 8 bit balue that represents the percentage of one period
+ in which the signal is active. It can be 50, 60, 70, 75, 80 or 90.
+ - led-active-low: boolean value that specifies whether the output is
+ negated with a NOT gate.
+ - power-supply: specifies the power source. It can either be a regulator
+ or a gpio which enables a regulator, i.e. a regulator-fixed as
+ described in
+ Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+
+Example:
+
+ irled@0 {
+ compatible = "ir-spi-led";
+ reg = <0x0>;
+ spi-max-frequency = <5000000>;
+ power-supply = <&vdd_led>;
+ led-active-low;
+ duty-cycle = /bits/ 8 <60>;
+ };
--
2.11.0
^ permalink raw reply related
* [PATCH v6 4/6] [media] rc-ir-raw: do not generate any receiving thread for raw transmitters
From: Andi Shyti @ 2016-12-18 11:11 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Sean Young, Rob Herring, Mark Rutland,
Richard Purdie, Jacek Anaszewski, Heiner Kallweit
Cc: linux-media, devicetree, linux-leds, linux-kernel, Andi Shyti,
Andi Shyti
In-Reply-To: <20161218111138.12831-1-andi.shyti@samsung.com>
Raw IR transmitters do not need any thread listening for
occurring events. Check the driver type before running the
thread.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Sean Young <sean@mess.org>
---
drivers/media/rc/rc-ir-raw.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
index 1c42a9f2f290..9938e42e0c0b 100644
--- a/drivers/media/rc/rc-ir-raw.c
+++ b/drivers/media/rc/rc-ir-raw.c
@@ -270,12 +270,19 @@ int ir_raw_event_register(struct rc_dev *dev)
INIT_KFIFO(dev->raw->kfifo);
spin_lock_init(&dev->raw->lock);
- dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw,
- "rc%u", dev->minor);
- if (IS_ERR(dev->raw->thread)) {
- rc = PTR_ERR(dev->raw->thread);
- goto out;
+ /*
+ * raw transmitters do not need any event registration
+ * because the event is coming from userspace
+ */
+ if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
+ dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw,
+ "rc%u", dev->minor);
+
+ if (IS_ERR(dev->raw->thread)) {
+ rc = PTR_ERR(dev->raw->thread);
+ goto out;
+ }
}
mutex_lock(&ir_raw_handler_lock);
--
2.11.0
^ permalink raw reply related
* [PATCH v6 3/6] [media] rc-core: add support for IR raw transmitters
From: Andi Shyti @ 2016-12-18 11:11 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Sean Young, Rob Herring, Mark Rutland,
Richard Purdie, Jacek Anaszewski, Heiner Kallweit
Cc: linux-media, devicetree, linux-leds, linux-kernel, Andi Shyti,
Andi Shyti
In-Reply-To: <20161218111138.12831-1-andi.shyti@samsung.com>
IR raw transmitter driver type is specified in the enum
rc_driver_type as RC_DRIVER_IR_RAW_TX which includes all those
devices that transmit raw stream of bit to a receiver.
The data are provided by userspace applications, therefore they
don't need any input device allocation, but still they need to be
registered as raw devices.
Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Sean Young <sean@mess.org>
---
drivers/media/rc/rc-main.c | 42 +++++++++++++++++++++++++-----------------
include/media/rc-core.h | 9 ++++++---
2 files changed, 31 insertions(+), 20 deletions(-)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 7c8411a40305..f527fe1f50ba 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1365,20 +1365,24 @@ struct rc_dev *rc_allocate_device(enum rc_driver_type type)
if (!dev)
return NULL;
- dev->input_dev = input_allocate_device();
- if (!dev->input_dev) {
- kfree(dev);
- return NULL;
- }
+ if (type != RC_DRIVER_IR_RAW_TX) {
+ dev->input_dev = input_allocate_device();
+ if (!dev->input_dev) {
+ kfree(dev);
+ return NULL;
+ }
+
+ dev->input_dev->getkeycode = ir_getkeycode;
+ dev->input_dev->setkeycode = ir_setkeycode;
+ input_set_drvdata(dev->input_dev, dev);
- dev->input_dev->getkeycode = ir_getkeycode;
- dev->input_dev->setkeycode = ir_setkeycode;
- input_set_drvdata(dev->input_dev, dev);
+ setup_timer(&dev->timer_keyup, ir_timer_keyup,
+ (unsigned long)dev);
- spin_lock_init(&dev->rc_map.lock);
- spin_lock_init(&dev->keylock);
+ spin_lock_init(&dev->rc_map.lock);
+ spin_lock_init(&dev->keylock);
+ }
mutex_init(&dev->lock);
- setup_timer(&dev->timer_keyup, ir_timer_keyup, (unsigned long)dev);
dev->dev.type = &rc_dev_type;
dev->dev.class = &rc_class;
@@ -1507,7 +1511,7 @@ static int rc_setup_rx_device(struct rc_dev *dev)
static void rc_free_rx_device(struct rc_dev *dev)
{
- if (!dev)
+ if (!dev || dev->driver_type == RC_DRIVER_IR_RAW_TX)
return;
ir_free_table(&dev->rc_map);
@@ -1537,7 +1541,8 @@ int rc_register_device(struct rc_dev *dev)
atomic_set(&dev->initialized, 0);
dev->dev.groups = dev->sysfs_groups;
- dev->sysfs_groups[attr++] = &rc_dev_protocol_attr_grp;
+ if (dev->driver_type != RC_DRIVER_IR_RAW_TX)
+ dev->sysfs_groups[attr++] = &rc_dev_protocol_attr_grp;
if (dev->s_filter)
dev->sysfs_groups[attr++] = &rc_dev_filter_attr_grp;
if (dev->s_wakeup_filter)
@@ -1555,11 +1560,14 @@ int rc_register_device(struct rc_dev *dev)
dev->input_name ?: "Unspecified device", path ?: "N/A");
kfree(path);
- rc = rc_setup_rx_device(dev);
- if (rc)
- goto out_dev;
+ if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
+ rc = rc_setup_rx_device(dev);
+ if (rc)
+ goto out_dev;
+ }
- if (dev->driver_type == RC_DRIVER_IR_RAW) {
+ if (dev->driver_type == RC_DRIVER_IR_RAW ||
+ dev->driver_type == RC_DRIVER_IR_RAW_TX) {
if (!raw_init) {
request_module_nowait("ir-lirc-codec");
raw_init = true;
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index ba92c86c47ff..e6cb336b4668 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -32,13 +32,16 @@ do { \
/**
* enum rc_driver_type - type of the RC output
*
- * @RC_DRIVER_SCANCODE: Driver or hardware generates a scancode
- * @RC_DRIVER_IR_RAW: Driver or hardware generates pulse/space sequences.
- * It needs a Infra-Red pulse/space decoder
+ * @RC_DRIVER_SCANCODE: Driver or hardware generates a scancode
+ * @RC_DRIVER_IR_RAW: Driver or hardware generates pulse/space sequences.
+ * It needs a Infra-Red pulse/space decoder
+ * @RC_DRIVER_IR_RAW_TX: Device transmitter only,
+ * driver requires pulse/space data sequence.
*/
enum rc_driver_type {
RC_DRIVER_SCANCODE = 0,
RC_DRIVER_IR_RAW,
+ RC_DRIVER_IR_RAW_TX,
};
/**
--
2.11.0
^ permalink raw reply related
* [PATCH v6 2/6] [media] rc-main: split setup and unregister functions
From: Andi Shyti @ 2016-12-18 11:11 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Sean Young, Rob Herring, Mark Rutland,
Richard Purdie, Jacek Anaszewski, Heiner Kallweit
Cc: linux-media, devicetree, linux-leds, linux-kernel, Andi Shyti,
Andi Shyti
In-Reply-To: <20161218111138.12831-1-andi.shyti@samsung.com>
Move the input device allocation, map and protocol handling to
different functions.
This patch fixes the following checkpatch error as well:
ERROR: do not initialise statics to false
#1438: FILE: drivers/media/rc/rc-main.c:1438:
+ static bool raw_init = false; /* raw decoders loaded? */
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Sean Young <sean@mess.org>
---
drivers/media/rc/rc-main.c | 143 +++++++++++++++++++++++++--------------------
1 file changed, 81 insertions(+), 62 deletions(-)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index a6bbceb7147f..7c8411a40305 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1436,16 +1436,12 @@ struct rc_dev *devm_rc_allocate_device(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_rc_allocate_device);
-int rc_register_device(struct rc_dev *dev)
+static int rc_setup_rx_device(struct rc_dev *dev)
{
- static bool raw_init = false; /* raw decoders loaded? */
- struct rc_map *rc_map;
- const char *path;
- int attr = 0;
- int minor;
int rc;
+ struct rc_map *rc_map;
- if (!dev || !dev->map_name)
+ if (!dev->map_name)
return -EINVAL;
rc_map = rc_map_get(dev->map_name);
@@ -1454,6 +1450,19 @@ int rc_register_device(struct rc_dev *dev)
if (!rc_map || !rc_map->scan || rc_map->size == 0)
return -EINVAL;
+ rc = ir_setkeytable(dev, rc_map);
+ if (rc)
+ return rc;
+
+ if (dev->change_protocol) {
+ u64 rc_type = (1ll << rc_map->rc_type);
+
+ rc = dev->change_protocol(dev, &rc_type);
+ if (rc < 0)
+ goto out_table;
+ dev->enabled_protocols = rc_type;
+ }
+
set_bit(EV_KEY, dev->input_dev->evbit);
set_bit(EV_REP, dev->input_dev->evbit);
set_bit(EV_MSC, dev->input_dev->evbit);
@@ -1463,6 +1472,61 @@ int rc_register_device(struct rc_dev *dev)
if (dev->close)
dev->input_dev->close = ir_close;
+ /*
+ * Default delay of 250ms is too short for some protocols, especially
+ * since the timeout is currently set to 250ms. Increase it to 500ms,
+ * to avoid wrong repetition of the keycodes. Note that this must be
+ * set after the call to input_register_device().
+ */
+ dev->input_dev->rep[REP_DELAY] = 500;
+
+ /*
+ * As a repeat event on protocols like RC-5 and NEC take as long as
+ * 110/114ms, using 33ms as a repeat period is not the right thing
+ * to do.
+ */
+ dev->input_dev->rep[REP_PERIOD] = 125;
+
+ dev->input_dev->dev.parent = &dev->dev;
+ memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
+ dev->input_dev->phys = dev->input_phys;
+ dev->input_dev->name = dev->input_name;
+
+ /* rc_open will be called here */
+ rc = input_register_device(dev->input_dev);
+ if (rc)
+ goto out_table;
+
+ return 0;
+
+out_table:
+ ir_free_table(&dev->rc_map);
+
+ return rc;
+}
+
+static void rc_free_rx_device(struct rc_dev *dev)
+{
+ if (!dev)
+ return;
+
+ ir_free_table(&dev->rc_map);
+
+ input_unregister_device(dev->input_dev);
+ dev->input_dev = NULL;
+}
+
+int rc_register_device(struct rc_dev *dev)
+{
+ static bool raw_init; /* 'false' default value, raw decoders loaded? */
+ const char *path;
+ int attr = 0;
+ int minor;
+ int rc;
+
+ if (!dev)
+ return -EINVAL;
+
minor = ida_simple_get(&rc_ida, 0, RC_DEV_MAX, GFP_KERNEL);
if (minor < 0)
return minor;
@@ -1486,39 +1550,15 @@ int rc_register_device(struct rc_dev *dev)
if (rc)
goto out_unlock;
- rc = ir_setkeytable(dev, rc_map);
- if (rc)
- goto out_dev;
-
- dev->input_dev->dev.parent = &dev->dev;
- memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
- dev->input_dev->phys = dev->input_phys;
- dev->input_dev->name = dev->input_name;
-
- rc = input_register_device(dev->input_dev);
- if (rc)
- goto out_table;
-
- /*
- * Default delay of 250ms is too short for some protocols, especially
- * since the timeout is currently set to 250ms. Increase it to 500ms,
- * to avoid wrong repetition of the keycodes. Note that this must be
- * set after the call to input_register_device().
- */
- dev->input_dev->rep[REP_DELAY] = 500;
-
- /*
- * As a repeat event on protocols like RC-5 and NEC take as long as
- * 110/114ms, using 33ms as a repeat period is not the right thing
- * to do.
- */
- dev->input_dev->rep[REP_PERIOD] = 125;
-
path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
dev_info(&dev->dev, "%s as %s\n",
dev->input_name ?: "Unspecified device", path ?: "N/A");
kfree(path);
+ rc = rc_setup_rx_device(dev);
+ if (rc)
+ goto out_dev;
+
if (dev->driver_type == RC_DRIVER_IR_RAW) {
if (!raw_init) {
request_module_nowait("ir-lirc-codec");
@@ -1526,36 +1566,20 @@ int rc_register_device(struct rc_dev *dev)
}
rc = ir_raw_event_register(dev);
if (rc < 0)
- goto out_input;
- }
-
- if (dev->change_protocol) {
- u64 rc_type = (1ll << rc_map->rc_type);
- rc = dev->change_protocol(dev, &rc_type);
- if (rc < 0)
- goto out_raw;
- dev->enabled_protocols = rc_type;
+ goto out_rx;
}
/* Allow the RC sysfs nodes to be accessible */
atomic_set(&dev->initialized, 1);
- IR_dprintk(1, "Registered rc%u (driver: %s, remote: %s, mode %s)\n",
+ IR_dprintk(1, "Registered rc%u (driver: %s)\n",
dev->minor,
- dev->driver_name ? dev->driver_name : "unknown",
- rc_map->name ? rc_map->name : "unknown",
- dev->driver_type == RC_DRIVER_IR_RAW ? "raw" : "cooked");
+ dev->driver_name ? dev->driver_name : "unknown");
return 0;
-out_raw:
- if (dev->driver_type == RC_DRIVER_IR_RAW)
- ir_raw_event_unregister(dev);
-out_input:
- input_unregister_device(dev->input_dev);
- dev->input_dev = NULL;
-out_table:
- ir_free_table(&dev->rc_map);
+out_rx:
+ rc_free_rx_device(dev);
out_dev:
device_del(&dev->dev);
out_unlock:
@@ -1601,12 +1625,7 @@ void rc_unregister_device(struct rc_dev *dev)
if (dev->driver_type == RC_DRIVER_IR_RAW)
ir_raw_event_unregister(dev);
- /* Freeing the table should also call the stop callback */
- ir_free_table(&dev->rc_map);
- IR_dprintk(1, "Freed keycode table\n");
-
- input_unregister_device(dev->input_dev);
- dev->input_dev = NULL;
+ rc_free_rx_device(dev);
device_del(&dev->dev);
--
2.11.0
^ permalink raw reply related
* [PATCH v6 1/6] [media] rc-main: assign driver type during allocation
From: Andi Shyti @ 2016-12-18 11:11 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Sean Young, Rob Herring, Mark Rutland,
Richard Purdie, Jacek Anaszewski, Heiner Kallweit
Cc: linux-media, devicetree, linux-leds, linux-kernel, Andi Shyti,
Andi Shyti
In-Reply-To: <20161218111138.12831-1-andi.shyti@samsung.com>
The driver type can be assigned immediately when an RC device
requests to the framework to allocate the device.
This is an 'enum rc_driver_type' data type and specifies whether
the device is a raw receiver or scancode receiver. The type will
be given as parameter to the rc_allocate_device device.
Change accordingly all the drivers calling rc_allocate_device()
so that the device type is specified during the rc device
allocation. Whenever the device type is not specified, it will be
set as RC_DRIVER_SCANCODE which was the default '0' value.
Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Sean Young <sean@mess.org>
---
drivers/hid/hid-picolcd_cir.c | 3 +--
drivers/media/cec/cec-core.c | 3 +--
drivers/media/common/siano/smsir.c | 3 +--
drivers/media/i2c/ir-kbd-i2c.c | 2 +-
drivers/media/pci/bt8xx/bttv-input.c | 2 +-
drivers/media/pci/cx23885/cx23885-input.c | 11 +----------
drivers/media/pci/cx88/cx88-input.c | 3 +--
drivers/media/pci/dm1105/dm1105.c | 3 +--
drivers/media/pci/mantis/mantis_input.c | 2 +-
drivers/media/pci/saa7134/saa7134-input.c | 2 +-
drivers/media/pci/smipcie/smipcie-ir.c | 3 +--
drivers/media/pci/ttpci/budget-ci.c | 2 +-
drivers/media/rc/ati_remote.c | 3 +--
drivers/media/rc/ene_ir.c | 3 +--
drivers/media/rc/fintek-cir.c | 3 +--
drivers/media/rc/gpio-ir-recv.c | 3 +--
drivers/media/rc/igorplugusb.c | 3 +--
drivers/media/rc/iguanair.c | 3 +--
drivers/media/rc/img-ir/img-ir-hw.c | 2 +-
drivers/media/rc/img-ir/img-ir-raw.c | 3 +--
drivers/media/rc/imon.c | 3 +--
drivers/media/rc/ir-hix5hd2.c | 3 +--
drivers/media/rc/ite-cir.c | 3 +--
drivers/media/rc/mceusb.c | 3 +--
drivers/media/rc/meson-ir.c | 3 +--
drivers/media/rc/nuvoton-cir.c | 3 +--
drivers/media/rc/rc-loopback.c | 3 +--
drivers/media/rc/rc-main.c | 9 ++++++---
drivers/media/rc/redrat3.c | 3 +--
drivers/media/rc/serial_ir.c | 3 +--
drivers/media/rc/st_rc.c | 3 +--
drivers/media/rc/streamzap.c | 3 +--
drivers/media/rc/sunxi-cir.c | 3 +--
drivers/media/rc/ttusbir.c | 3 +--
drivers/media/rc/winbond-cir.c | 3 +--
drivers/media/usb/au0828/au0828-input.c | 3 +--
drivers/media/usb/cx231xx/cx231xx-input.c | 2 +-
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 3 +--
drivers/media/usb/dvb-usb/dvb-usb-remote.c | 3 +--
drivers/media/usb/em28xx/em28xx-input.c | 2 +-
drivers/media/usb/tm6000/tm6000-input.c | 3 +--
include/media/rc-core.h | 6 ++++--
42 files changed, 50 insertions(+), 85 deletions(-)
diff --git a/drivers/hid/hid-picolcd_cir.c b/drivers/hid/hid-picolcd_cir.c
index 96286510f42e..38b0ea8d89e0 100644
--- a/drivers/hid/hid-picolcd_cir.c
+++ b/drivers/hid/hid-picolcd_cir.c
@@ -108,12 +108,11 @@ int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
struct rc_dev *rdev;
int ret = 0;
- rdev = rc_allocate_device();
+ rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rdev)
return -ENOMEM;
rdev->priv = data;
- rdev->driver_type = RC_DRIVER_IR_RAW;
rdev->allowed_protocols = RC_BIT_ALL;
rdev->open = picolcd_cir_open;
rdev->close = picolcd_cir_close;
diff --git a/drivers/media/cec/cec-core.c b/drivers/media/cec/cec-core.c
index aca3ab83a8a1..37217e205040 100644
--- a/drivers/media/cec/cec-core.c
+++ b/drivers/media/cec/cec-core.c
@@ -239,7 +239,7 @@ struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops,
#if IS_REACHABLE(CONFIG_RC_CORE)
/* Prepare the RC input device */
- adap->rc = rc_allocate_device();
+ adap->rc = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!adap->rc) {
pr_err("cec-%s: failed to allocate memory for rc_dev\n",
name);
@@ -259,7 +259,6 @@ struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops,
adap->rc->input_id.vendor = 0;
adap->rc->input_id.product = 0;
adap->rc->input_id.version = 1;
- adap->rc->driver_type = RC_DRIVER_SCANCODE;
adap->rc->driver_name = CEC_NAME;
adap->rc->allowed_protocols = RC_BIT_CEC;
adap->rc->priv = adap;
diff --git a/drivers/media/common/siano/smsir.c b/drivers/media/common/siano/smsir.c
index 41f2a3939979..ee30c7b8fb15 100644
--- a/drivers/media/common/siano/smsir.c
+++ b/drivers/media/common/siano/smsir.c
@@ -58,7 +58,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
struct rc_dev *dev;
pr_debug("Allocating rc device\n");
- dev = rc_allocate_device();
+ dev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!dev)
return -ENOMEM;
@@ -86,7 +86,6 @@ int sms_ir_init(struct smscore_device_t *coredev)
#endif
dev->priv = coredev;
- dev->driver_type = RC_DRIVER_IR_RAW;
dev->allowed_protocols = RC_BIT_ALL;
dev->map_name = sms_get_board(board_id)->rc_codes;
dev->driver_name = MODULE_NAME;
diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c
index cede3975d04b..5ad5167cf492 100644
--- a/drivers/media/i2c/ir-kbd-i2c.c
+++ b/drivers/media/i2c/ir-kbd-i2c.c
@@ -428,7 +428,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
* If platform_data doesn't specify rc_dev, initialize it
* internally
*/
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!rc)
return -ENOMEM;
}
diff --git a/drivers/media/pci/bt8xx/bttv-input.c b/drivers/media/pci/bt8xx/bttv-input.c
index 4da720e4867e..76daec7f0ccd 100644
--- a/drivers/media/pci/bt8xx/bttv-input.c
+++ b/drivers/media/pci/bt8xx/bttv-input.c
@@ -424,7 +424,7 @@ int bttv_input_init(struct bttv *btv)
return -ENODEV;
ir = kzalloc(sizeof(*ir),GFP_KERNEL);
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!ir || !rc)
goto err_out_free;
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
index 1f092febdbd1..c743317a6c3b 100644
--- a/drivers/media/pci/cx23885/cx23885-input.c
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -267,7 +267,6 @@ int cx23885_input_init(struct cx23885_dev *dev)
struct cx23885_kernel_ir *kernel_ir;
struct rc_dev *rc;
char *rc_map;
- enum rc_driver_type driver_type;
u64 allowed_protos;
int ret;
@@ -285,28 +284,24 @@ int cx23885_input_init(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Integrated CX2388[58] IR controller */
- driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
/* The grey Hauppauge RC-5 remote */
rc_map = RC_MAP_HAUPPAUGE;
break;
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
/* Integrated CX23885 IR controller */
- driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
/* The grey Terratec remote with orange buttons */
rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS;
break;
case CX23885_BOARD_TEVII_S470:
/* Integrated CX23885 IR controller */
- driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
/* A guess at the remote */
rc_map = RC_MAP_TEVII_NEC;
break;
case CX23885_BOARD_MYGICA_X8507:
/* Integrated CX23885 IR controller */
- driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
/* A guess at the remote */
rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02;
@@ -314,7 +309,6 @@ int cx23885_input_init(struct cx23885_dev *dev)
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
/* Integrated CX23885 IR controller */
- driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
/* A guess at the remote */
rc_map = RC_MAP_TBS_NEC;
@@ -326,13 +320,11 @@ int cx23885_input_init(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S952:
case CX23885_BOARD_DVBSKY_T982:
/* Integrated CX23885 IR controller */
- driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
rc_map = RC_MAP_DVBSKY;
break;
case CX23885_BOARD_TT_CT2_4500_CI:
/* Integrated CX23885 IR controller */
- driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
rc_map = RC_MAP_TT_1500;
break;
@@ -352,7 +344,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
pci_name(dev->pci));
/* input device */
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rc) {
ret = -ENOMEM;
goto err_out_free;
@@ -371,7 +363,6 @@ int cx23885_input_init(struct cx23885_dev *dev)
rc->input_id.product = dev->pci->device;
}
rc->dev.parent = &dev->pci->dev;
- rc->driver_type = driver_type;
rc->allowed_protocols = allowed_protos;
rc->priv = kernel_ir;
rc->open = cx23885_input_ir_open;
diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c
index dcfea3502e42..6e9f366eb85f 100644
--- a/drivers/media/pci/cx88/cx88-input.c
+++ b/drivers/media/pci/cx88/cx88-input.c
@@ -276,7 +276,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
*/
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- dev = rc_allocate_device();
+ dev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!ir || !dev)
goto err_out_free;
@@ -486,7 +486,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
dev->scancode_mask = hardware_mask;
if (ir->sampling) {
- dev->driver_type = RC_DRIVER_IR_RAW;
dev->timeout = 10 * 1000 * 1000; /* 10 ms */
} else {
dev->driver_type = RC_DRIVER_SCANCODE;
diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c
index a589aa78d1d9..76e07c7b3289 100644
--- a/drivers/media/pci/dm1105/dm1105.c
+++ b/drivers/media/pci/dm1105/dm1105.c
@@ -743,7 +743,7 @@ static int dm1105_ir_init(struct dm1105_dev *dm1105)
struct rc_dev *dev;
int err = -ENOMEM;
- dev = rc_allocate_device();
+ dev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!dev)
return -ENOMEM;
@@ -752,7 +752,6 @@ static int dm1105_ir_init(struct dm1105_dev *dm1105)
dev->driver_name = MODULE_NAME;
dev->map_name = RC_MAP_DM1105_NEC;
- dev->driver_type = RC_DRIVER_SCANCODE;
dev->input_name = "DVB on-card IR receiver";
dev->input_phys = dm1105->ir.input_phys;
dev->input_id.bustype = BUS_PCI;
diff --git a/drivers/media/pci/mantis/mantis_input.c b/drivers/media/pci/mantis/mantis_input.c
index 7f7f1d4d7bb1..50d10cb7d49d 100644
--- a/drivers/media/pci/mantis/mantis_input.c
+++ b/drivers/media/pci/mantis/mantis_input.c
@@ -39,7 +39,7 @@ int mantis_input_init(struct mantis_pci *mantis)
struct rc_dev *dev;
int err;
- dev = rc_allocate_device();
+ dev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!dev) {
dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
err = -ENOMEM;
diff --git a/drivers/media/pci/saa7134/saa7134-input.c b/drivers/media/pci/saa7134/saa7134-input.c
index 823b75ed47e1..509caa86a8c3 100644
--- a/drivers/media/pci/saa7134/saa7134-input.c
+++ b/drivers/media/pci/saa7134/saa7134-input.c
@@ -846,7 +846,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!ir || !rc) {
err = -ENOMEM;
goto err_out_free;
diff --git a/drivers/media/pci/smipcie/smipcie-ir.c b/drivers/media/pci/smipcie/smipcie-ir.c
index 826c7c75e64d..d2730c3fdbae 100644
--- a/drivers/media/pci/smipcie/smipcie-ir.c
+++ b/drivers/media/pci/smipcie/smipcie-ir.c
@@ -183,7 +183,7 @@ int smi_ir_init(struct smi_dev *dev)
struct rc_dev *rc_dev;
struct smi_rc *ir = &dev->ir;
- rc_dev = rc_allocate_device();
+ rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!rc_dev)
return -ENOMEM;
@@ -202,7 +202,6 @@ int smi_ir_init(struct smi_dev *dev)
rc_dev->input_id.product = dev->pci_dev->subsystem_device;
rc_dev->dev.parent = &dev->pci_dev->dev;
- rc_dev->driver_type = RC_DRIVER_SCANCODE;
rc_dev->map_name = dev->info->rc_map;
ir->rc_dev = rc_dev;
diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c
index 20ad93bf0f54..0c0b733649e2 100644
--- a/drivers/media/pci/ttpci/budget-ci.c
+++ b/drivers/media/pci/ttpci/budget-ci.c
@@ -177,7 +177,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
struct rc_dev *dev;
int error;
- dev = rc_allocate_device();
+ dev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!dev) {
printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
return -ENOMEM;
diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
index 0884b7dc0e71..7d0ee3d3e2ca 100644
--- a/drivers/media/rc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -764,7 +764,6 @@ static void ati_remote_rc_init(struct ati_remote *ati_remote)
struct rc_dev *rdev = ati_remote->rdev;
rdev->priv = ati_remote;
- rdev->driver_type = RC_DRIVER_SCANCODE;
rdev->allowed_protocols = RC_BIT_OTHER;
rdev->driver_name = "ati_remote";
@@ -851,7 +850,7 @@ static int ati_remote_probe(struct usb_interface *interface,
}
ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
- rc_dev = rc_allocate_device();
+ rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!ati_remote || !rc_dev)
goto exit_free_dev_rdev;
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index bd5512e64aea..3b7275fc4d91 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -1012,7 +1012,7 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
/* allocate memory */
dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
- rdev = rc_allocate_device();
+ rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!dev || !rdev)
goto exit_free_dev_rdev;
@@ -1058,7 +1058,6 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
if (!dev->hw_learning_and_tx_capable)
learning_mode_force = false;
- rdev->driver_type = RC_DRIVER_IR_RAW;
rdev->allowed_protocols = RC_BIT_ALL;
rdev->priv = dev;
rdev->open = ene_open;
diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c
index ecab69ea3d51..df125c28bc89 100644
--- a/drivers/media/rc/fintek-cir.c
+++ b/drivers/media/rc/fintek-cir.c
@@ -492,7 +492,7 @@ static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id
return ret;
/* input device for IR remote (and tx) */
- rdev = rc_allocate_device();
+ rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rdev)
goto exit_free_dev_rdev;
@@ -534,7 +534,6 @@ static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id
/* Set up the rc device */
rdev->priv = fintek;
- rdev->driver_type = RC_DRIVER_IR_RAW;
rdev->allowed_protocols = RC_BIT_ALL;
rdev->open = fintek_open;
rdev->close = fintek_close;
diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
index 5b63b1f15cb1..d5d2152443a2 100644
--- a/drivers/media/rc/gpio-ir-recv.c
+++ b/drivers/media/rc/gpio-ir-recv.c
@@ -143,14 +143,13 @@ static int gpio_ir_recv_probe(struct platform_device *pdev)
if (!gpio_dev)
return -ENOMEM;
- rcdev = rc_allocate_device();
+ rcdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rcdev) {
rc = -ENOMEM;
goto err_allocate_device;
}
rcdev->priv = gpio_dev;
- rcdev->driver_type = RC_DRIVER_IR_RAW;
rcdev->input_name = GPIO_IR_DEVICE_NAME;
rcdev->input_phys = GPIO_IR_DEVICE_NAME "/input0";
rcdev->input_id.bustype = BUS_HOST;
diff --git a/drivers/media/rc/igorplugusb.c b/drivers/media/rc/igorplugusb.c
index 5cf983be07a2..d770a6242e23 100644
--- a/drivers/media/rc/igorplugusb.c
+++ b/drivers/media/rc/igorplugusb.c
@@ -190,7 +190,7 @@ static int igorplugusb_probe(struct usb_interface *intf,
usb_make_path(udev, ir->phys, sizeof(ir->phys));
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rc)
goto fail;
@@ -198,7 +198,6 @@ static int igorplugusb_probe(struct usb_interface *intf,
rc->input_phys = ir->phys;
usb_to_input_id(udev, &rc->input_id);
rc->dev.parent = &intf->dev;
- rc->driver_type = RC_DRIVER_IR_RAW;
/*
* This device can only store 36 pulses + spaces, which is not enough
* for the NEC protocol and many others.
diff --git a/drivers/media/rc/iguanair.c b/drivers/media/rc/iguanair.c
index 5f634545ddd8..4cd1e6b2625a 100644
--- a/drivers/media/rc/iguanair.c
+++ b/drivers/media/rc/iguanair.c
@@ -431,7 +431,7 @@ static int iguanair_probe(struct usb_interface *intf,
struct usb_host_interface *idesc;
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!ir || !rc) {
ret = -ENOMEM;
goto out;
@@ -494,7 +494,6 @@ static int iguanair_probe(struct usb_interface *intf,
rc->input_phys = ir->phys;
usb_to_input_id(ir->udev, &rc->input_id);
rc->dev.parent = &intf->dev;
- rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protocols = RC_BIT_ALL;
rc->priv = ir;
rc->open = iguanair_open;
diff --git a/drivers/media/rc/img-ir/img-ir-hw.c b/drivers/media/rc/img-ir/img-ir-hw.c
index 7bb71bc9f534..c87ae03b3a38 100644
--- a/drivers/media/rc/img-ir/img-ir-hw.c
+++ b/drivers/media/rc/img-ir/img-ir-hw.c
@@ -1071,7 +1071,7 @@ int img_ir_probe_hw(struct img_ir_priv *priv)
}
/* Allocate hardware decoder */
- hw->rdev = rdev = rc_allocate_device();
+ hw->rdev = rdev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!rdev) {
dev_err(priv->dev, "cannot allocate input device\n");
error = -ENOMEM;
diff --git a/drivers/media/rc/img-ir/img-ir-raw.c b/drivers/media/rc/img-ir/img-ir-raw.c
index 33f37ed87ad2..8d2f8e2006e7 100644
--- a/drivers/media/rc/img-ir/img-ir-raw.c
+++ b/drivers/media/rc/img-ir/img-ir-raw.c
@@ -110,7 +110,7 @@ int img_ir_probe_raw(struct img_ir_priv *priv)
setup_timer(&raw->timer, img_ir_echo_timer, (unsigned long)priv);
/* Allocate raw decoder */
- raw->rdev = rdev = rc_allocate_device();
+ raw->rdev = rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rdev) {
dev_err(priv->dev, "cannot allocate raw input device\n");
return -ENOMEM;
@@ -118,7 +118,6 @@ int img_ir_probe_raw(struct img_ir_priv *priv)
rdev->priv = priv;
rdev->map_name = RC_MAP_EMPTY;
rdev->input_name = "IMG Infrared Decoder Raw";
- rdev->driver_type = RC_DRIVER_IR_RAW;
/* Register raw decoder */
error = rc_register_device(rdev);
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 0785a24af8fc..4234ae651ab0 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1939,7 +1939,7 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x88 };
- rdev = rc_allocate_device();
+ rdev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!rdev) {
dev_err(ictx->dev, "remote control dev allocation failed\n");
goto out;
@@ -1957,7 +1957,6 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
rdev->dev.parent = ictx->dev;
rdev->priv = ictx;
- rdev->driver_type = RC_DRIVER_SCANCODE;
rdev->allowed_protocols = RC_BIT_OTHER | RC_BIT_RC6_MCE; /* iMON PAD or MCE */
rdev->change_protocol = imon_ir_change_protocol;
rdev->driver_name = MOD_NAME;
diff --git a/drivers/media/rc/ir-hix5hd2.c b/drivers/media/rc/ir-hix5hd2.c
index d26907e684dc..dc3b9593f138 100644
--- a/drivers/media/rc/ir-hix5hd2.c
+++ b/drivers/media/rc/ir-hix5hd2.c
@@ -229,7 +229,7 @@ static int hix5hd2_ir_probe(struct platform_device *pdev)
return priv->irq;
}
- rdev = rc_allocate_device();
+ rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rdev)
return -ENOMEM;
@@ -242,7 +242,6 @@ static int hix5hd2_ir_probe(struct platform_device *pdev)
clk_prepare_enable(priv->clock);
priv->rate = clk_get_rate(priv->clock);
- rdev->driver_type = RC_DRIVER_IR_RAW;
rdev->allowed_protocols = RC_BIT_ALL;
rdev->priv = priv;
rdev->open = hix5hd2_ir_open;
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index 367b28bed627..92ed356415a4 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -1470,7 +1470,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
return ret;
/* input device for IR remote (and tx) */
- rdev = rc_allocate_device();
+ rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rdev)
goto exit_free_dev_rdev;
itdev->rdev = rdev;
@@ -1561,7 +1561,6 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
/* set up ir-core props */
rdev->priv = itdev;
- rdev->driver_type = RC_DRIVER_IR_RAW;
rdev->allowed_protocols = RC_BIT_ALL;
rdev->open = ite_open;
rdev->close = ite_close;
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 9bf69179eee0..ebcc82d1c068 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1181,7 +1181,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
struct rc_dev *rc;
int ret;
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rc) {
dev_err(dev, "remote dev allocation failed");
goto out;
@@ -1201,7 +1201,6 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
usb_to_input_id(ir->usbdev, &rc->input_id);
rc->dev.parent = dev;
rc->priv = ir;
- rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protocols = RC_BIT_ALL;
rc->timeout = MS_TO_NS(100);
if (!ir->flags.no_tx) {
diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
index 7eb3f4f1ddcd..8947dc6ae4a7 100644
--- a/drivers/media/rc/meson-ir.c
+++ b/drivers/media/rc/meson-ir.c
@@ -131,7 +131,7 @@ static int meson_ir_probe(struct platform_device *pdev)
return ir->irq;
}
- ir->rc = rc_allocate_device();
+ ir->rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!ir->rc) {
dev_err(dev, "failed to allocate rc device\n");
return -ENOMEM;
@@ -144,7 +144,6 @@ static int meson_ir_probe(struct platform_device *pdev)
map_name = of_get_property(node, "linux,rc-map-name", NULL);
ir->rc->map_name = map_name ? map_name : RC_MAP_EMPTY;
ir->rc->dev.parent = dev;
- ir->rc->driver_type = RC_DRIVER_IR_RAW;
ir->rc->allowed_protocols = RC_BIT_ALL;
ir->rc->rx_resolution = US_TO_NS(MESON_TRATE);
ir->rc->timeout = MS_TO_NS(200);
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index 4b78c891eb77..d4cc8804f11a 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -998,7 +998,7 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
return -ENOMEM;
/* input device for IR remote (and tx) */
- nvt->rdev = devm_rc_allocate_device(&pdev->dev);
+ nvt->rdev = devm_rc_allocate_device(&pdev->dev, RC_DRIVER_IR_RAW);
if (!nvt->rdev)
return -ENOMEM;
rdev = nvt->rdev;
@@ -1061,7 +1061,6 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
/* Set up the rc device */
rdev->priv = nvt;
- rdev->driver_type = RC_DRIVER_IR_RAW;
rdev->allowed_protocols = RC_BIT_ALL;
rdev->open = nvt_open;
rdev->close = nvt_close;
diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c
index 63dace8198b0..36192acb696b 100644
--- a/drivers/media/rc/rc-loopback.c
+++ b/drivers/media/rc/rc-loopback.c
@@ -181,7 +181,7 @@ static int __init loop_init(void)
struct rc_dev *rc;
int ret;
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rc) {
printk(KERN_ERR DRIVER_NAME ": rc_dev allocation failed\n");
return -ENOMEM;
@@ -194,7 +194,6 @@ static int __init loop_init(void)
rc->driver_name = DRIVER_NAME;
rc->map_name = RC_MAP_EMPTY;
rc->priv = &loopdev;
- rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protocols = RC_BIT_ALL;
rc->timeout = 100 * 1000 * 1000; /* 100 ms */
rc->min_timeout = 1;
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index dedaf38c5ff6..a6bbceb7147f 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1357,7 +1357,7 @@ static struct device_type rc_dev_type = {
.uevent = rc_dev_uevent,
};
-struct rc_dev *rc_allocate_device(void)
+struct rc_dev *rc_allocate_device(enum rc_driver_type type)
{
struct rc_dev *dev;
@@ -1384,6 +1384,8 @@ struct rc_dev *rc_allocate_device(void)
dev->dev.class = &rc_class;
device_initialize(&dev->dev);
+ dev->driver_type = type;
+
__module_get(THIS_MODULE);
return dev;
}
@@ -1410,7 +1412,8 @@ static void devm_rc_alloc_release(struct device *dev, void *res)
rc_free_device(*(struct rc_dev **)res);
}
-struct rc_dev *devm_rc_allocate_device(struct device *dev)
+struct rc_dev *devm_rc_allocate_device(struct device *dev,
+ enum rc_driver_type type)
{
struct rc_dev **dr, *rc;
@@ -1418,7 +1421,7 @@ struct rc_dev *devm_rc_allocate_device(struct device *dev)
if (!dr)
return NULL;
- rc = rc_allocate_device();
+ rc = rc_allocate_device(type);
if (!rc) {
devres_free(dr);
return NULL;
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 2784f5dae398..2b6f8287eee0 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -945,7 +945,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3)
int ret;
u16 prod = le16_to_cpu(rr3->udev->descriptor.idProduct);
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rc)
return NULL;
@@ -960,7 +960,6 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3)
usb_to_input_id(rr3->udev, &rc->input_id);
rc->dev.parent = dev;
rc->priv = rr3;
- rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protocols = RC_BIT_ALL;
rc->min_timeout = MS_TO_NS(RR3_RX_MIN_TIMEOUT);
rc->max_timeout = MS_TO_NS(RR3_RX_MAX_TIMEOUT);
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 436bd58b5f05..640acc619fd5 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -738,7 +738,7 @@ static int __init serial_ir_init_module(void)
if (result)
return result;
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev);
+ rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
if (!rcdev) {
result = -ENOMEM;
goto serial_cleanup;
@@ -777,7 +777,6 @@ static int __init serial_ir_init_module(void)
rcdev->open = serial_ir_open;
rcdev->close = serial_ir_close;
rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->driver_type = RC_DRIVER_IR_RAW;
rcdev->allowed_protocols = RC_BIT_ALL;
rcdev->driver_name = KBUILD_MODNAME;
rcdev->map_name = RC_MAP_RC6_MCE;
diff --git a/drivers/media/rc/st_rc.c b/drivers/media/rc/st_rc.c
index 1fa0c9d1c508..e6f673568ed6 100644
--- a/drivers/media/rc/st_rc.c
+++ b/drivers/media/rc/st_rc.c
@@ -235,7 +235,7 @@ static int st_rc_probe(struct platform_device *pdev)
if (!rc_dev)
return -ENOMEM;
- rdev = rc_allocate_device();
+ rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rdev)
return -ENOMEM;
@@ -290,7 +290,6 @@ static int st_rc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, rc_dev);
st_rc_hardware_init(rc_dev);
- rdev->driver_type = RC_DRIVER_IR_RAW;
rdev->allowed_protocols = RC_BIT_ALL;
/* rx sampling rate is 10Mhz */
rdev->rx_resolution = 100;
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index 53f9b0af358a..f434e45b0832 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -291,7 +291,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
struct device *dev = sz->dev;
int ret;
- rdev = rc_allocate_device();
+ rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!rdev) {
dev_err(dev, "remote dev allocation failed\n");
goto out;
@@ -308,7 +308,6 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
usb_to_input_id(sz->usbdev, &rdev->input_id);
rdev->dev.parent = dev;
rdev->priv = sz;
- rdev->driver_type = RC_DRIVER_IR_RAW;
rdev->allowed_protocols = RC_BIT_ALL;
rdev->driver_name = DRIVER_NAME;
rdev->map_name = RC_MAP_STREAMZAP;
diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
index eaadc081760a..5451f3d74142 100644
--- a/drivers/media/rc/sunxi-cir.c
+++ b/drivers/media/rc/sunxi-cir.c
@@ -212,7 +212,7 @@ static int sunxi_ir_probe(struct platform_device *pdev)
goto exit_clkdisable_clk;
}
- ir->rc = rc_allocate_device();
+ ir->rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!ir->rc) {
dev_err(dev, "failed to allocate device\n");
ret = -ENOMEM;
@@ -229,7 +229,6 @@ static int sunxi_ir_probe(struct platform_device *pdev)
ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
ir->rc->dev.parent = dev;
- ir->rc->driver_type = RC_DRIVER_IR_RAW;
ir->rc->allowed_protocols = RC_BIT_ALL;
ir->rc->rx_resolution = SUNXI_IR_SAMPLE;
ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
diff --git a/drivers/media/rc/ttusbir.c b/drivers/media/rc/ttusbir.c
index bc214e2b3a36..6ff2cefeda52 100644
--- a/drivers/media/rc/ttusbir.c
+++ b/drivers/media/rc/ttusbir.c
@@ -205,7 +205,7 @@ static int ttusbir_probe(struct usb_interface *intf,
int altsetting = -1;
tt = kzalloc(sizeof(*tt), GFP_KERNEL);
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!tt || !rc) {
ret = -ENOMEM;
goto out;
@@ -317,7 +317,6 @@ static int ttusbir_probe(struct usb_interface *intf,
rc->input_phys = tt->phys;
usb_to_input_id(tt->udev, &rc->input_id);
rc->dev.parent = &intf->dev;
- rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protocols = RC_BIT_ALL;
rc->priv = tt;
rc->driver_name = DRIVER_NAME;
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 78491ed48d92..bc95d2236322 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -1059,13 +1059,12 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
if (err)
goto exit_free_data;
- data->dev = rc_allocate_device();
+ data->dev = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!data->dev) {
err = -ENOMEM;
goto exit_unregister_led;
}
- data->dev->driver_type = RC_DRIVER_IR_RAW;
data->dev->driver_name = DRVNAME;
data->dev->input_name = WBCIR_NAME;
data->dev->input_phys = "wbcir/cir0";
diff --git a/drivers/media/usb/au0828/au0828-input.c b/drivers/media/usb/au0828/au0828-input.c
index 1e66e7828d8f..9ec919c68482 100644
--- a/drivers/media/usb/au0828/au0828-input.c
+++ b/drivers/media/usb/au0828/au0828-input.c
@@ -298,7 +298,7 @@ int au0828_rc_register(struct au0828_dev *dev)
return -ENODEV;
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_IR_RAW);
if (!ir || !rc)
goto error;
@@ -343,7 +343,6 @@ int au0828_rc_register(struct au0828_dev *dev)
rc->input_id.product = le16_to_cpu(dev->usbdev->descriptor.idProduct);
rc->dev.parent = &dev->usbdev->dev;
rc->driver_name = "au0828-input";
- rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protocols = RC_BIT_NEC | RC_BIT_NECX | RC_BIT_NEC32 |
RC_BIT_RC5;
diff --git a/drivers/media/usb/cx231xx/cx231xx-input.c b/drivers/media/usb/cx231xx/cx231xx-input.c
index 15d8d1b5f05c..6e80f3c573f3 100644
--- a/drivers/media/usb/cx231xx/cx231xx-input.c
+++ b/drivers/media/usb/cx231xx/cx231xx-input.c
@@ -72,7 +72,7 @@ int cx231xx_ir_init(struct cx231xx *dev)
memset(&info, 0, sizeof(struct i2c_board_info));
memset(&dev->init_data, 0, sizeof(dev->init_data));
- dev->init_data.rc_dev = rc_allocate_device();
+ dev->init_data.rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!dev->init_data.rc_dev)
return -ENOMEM;
diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
index a8e6624fbe83..298c91a6f1f9 100644
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
@@ -147,7 +147,7 @@ static int dvb_usbv2_remote_init(struct dvb_usb_device *d)
if (!d->rc.map_name)
return 0;
- dev = rc_allocate_device();
+ dev = rc_allocate_device(d->rc.driver_type);
if (!dev) {
ret = -ENOMEM;
goto err;
@@ -162,7 +162,6 @@ static int dvb_usbv2_remote_init(struct dvb_usb_device *d)
/* TODO: likely RC-core should took const char * */
dev->driver_name = (char *) d->props->driver_name;
dev->map_name = d->rc.map_name;
- dev->driver_type = d->rc.driver_type;
dev->allowed_protocols = d->rc.allowed_protos;
dev->change_protocol = d->rc.change_protocol;
dev->priv = d;
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-remote.c b/drivers/media/usb/dvb-usb/dvb-usb-remote.c
index c259f9e43542..059ded59208e 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-remote.c
@@ -265,7 +265,7 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
int err, rc_interval;
struct rc_dev *dev;
- dev = rc_allocate_device();
+ dev = rc_allocate_device(d->props.rc.core.driver_type);
if (!dev)
return -ENOMEM;
@@ -273,7 +273,6 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
dev->map_name = d->props.rc.core.rc_codes;
dev->change_protocol = d->props.rc.core.change_protocol;
dev->allowed_protocols = d->props.rc.core.allowed_protos;
- dev->driver_type = d->props.rc.core.driver_type;
usb_to_input_id(d->udev, &dev->input_id);
dev->input_name = "IR-receiver inside an USB DVB receiver";
dev->input_phys = d->rc_phys;
diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index 782ce095c8c5..aa24bba7b924 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -719,7 +719,7 @@ static int em28xx_ir_init(struct em28xx *dev)
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
if (!ir)
return -ENOMEM;
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!rc)
goto error;
diff --git a/drivers/media/usb/tm6000/tm6000-input.c b/drivers/media/usb/tm6000/tm6000-input.c
index 26b2ebb62547..377a69bf85fa 100644
--- a/drivers/media/usb/tm6000/tm6000-input.c
+++ b/drivers/media/usb/tm6000/tm6000-input.c
@@ -429,7 +429,7 @@ int tm6000_ir_init(struct tm6000_core *dev)
return 0;
ir = kzalloc(sizeof(*ir), GFP_ATOMIC);
- rc = rc_allocate_device();
+ rc = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!ir || !rc)
goto out;
@@ -456,7 +456,6 @@ int tm6000_ir_init(struct tm6000_core *dev)
ir->polling = 50;
INIT_DELAYED_WORK(&ir->work, tm6000_ir_handle_key);
}
- rc->driver_type = RC_DRIVER_SCANCODE;
snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
dev->name);
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index 55281b92105a..ba92c86c47ff 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -200,17 +200,19 @@ struct rc_dev {
/**
* rc_allocate_device - Allocates a RC device
*
+ * @rc_driver_type: specifies the type of the RC output to be allocated
* returns a pointer to struct rc_dev.
*/
-struct rc_dev *rc_allocate_device(void);
+struct rc_dev *rc_allocate_device(enum rc_driver_type);
/**
* devm_rc_allocate_device - Managed RC device allocation
*
* @dev: pointer to struct device
+ * @rc_driver_type: specifies the type of the RC output to be allocated
* returns a pointer to struct rc_dev.
*/
-struct rc_dev *devm_rc_allocate_device(struct device *dev);
+struct rc_dev *devm_rc_allocate_device(struct device *dev, enum rc_driver_type);
/**
* rc_free_device - Frees a RC device
--
2.11.0
^ permalink raw reply related
* [PATCH v6 0/6] Add support for IR transmitters
From: Andi Shyti @ 2016-12-18 11:11 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Sean Young, Rob Herring, Mark Rutland,
Richard Purdie, Jacek Anaszewski, Heiner Kallweit
Cc: linux-media-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-leds-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Andi Shyti, Andi Shyti
Hi,
The main goal is to add support in the rc framework for IR
transmitters, which currently is only supported by lirc but that
is not the preferred way.
The last patch adds support for an IR transmitter driven by
the MOSI line of an SPI controller, it's the case of the Samsung
TM2(e) board which support is currently ongoing.
The last patch adds support for an IR transmitter driven by
the MOSI line of an SPI controller, it's the case of the Samsung
TM2(e) board which support is currently ongoing.
The patchset is based on next-20161218, while the media directory
is a bit more outdated.
Thanks,
Andi
Changelog from version 5:
-------------------------
patch 1: fixed rebase conflict on drivers/media/cec/cec-core.c
patch 2: fixed checkpatch error
patch 3: restored a Kbuild Test Robot error fix which was lost
in v5
Changelog from version 4:
-------------------------
patch 2: fixed a slip on a copy/paste which caused the breakage
of the input interface for receivers. Thanks again Sean!
Changelog from version 3:
-------------------------
Added the patches Sean's review.
patch 1: commit ddbf7d5a has introduced the devm_* managed version
of rc_allocate_device and rc_register_device, this patch
has been rebased on top of it and adds the driver type
as a parameter of the devm_rc_allocate_device.
patch 3: fixes a warning from the kbuild test robot
patch 5: after a discussion with Rob, despite mine, Jacek's and
Mauro's objections [*] the binding has been placed under
leds/irled/spi-ir-led.txt
patch 6: uses the new devm_* allocation and registration rc
functions
[*] https://www.spinics.net/lists/linux-leds/msg07062.html
https://www.spinics.net/lists/linux-leds/msg07164.html
https://www.spinics.net/lists/linux-leds/msg07167.html
Changelog from version 2:
-------------------------
The original patch number 5 has been abandoned because it was not
bringing much benenfit.
patch 1: rebased on the new kernel.
patch 3: removed the sysfs attribute protocol for transmitters
patch 5: the binding has been moved to the leds section instead
of the media. Fixed all the comments from Rob
patch 6: fixed all the comments from Sean added also Sean's
review.
Changelog from version 1:
-------------------------
The RFC is now PATCH. The main difference is that this version
doesn't try to add the any bit streaming protocol and doesn't
modify any LIRC interface specification.
patch 1: updates all the drivers using rc_allocate_device
patch 2: fixed errors and warning reported from the kbuild test
robot
patch 5: this patch has been dropped and replaced with a new one
which avoids waiting for transmitters.
patch 6: added new properties to the dts specification
patch 7: the driver uses the pulse/space input and converts it to
a bit stream.
Andi Shyti (6):
[media] rc-main: assign driver type during allocation
[media] rc-main: split setup and unregister functions
[media] rc-core: add support for IR raw transmitters
[media] rc-ir-raw: do not generate any receiving thread for raw
transmitters
Documentation: bindings: add documentation for ir-spi device driver
[media] rc: add support for IR LEDs driven through SPI
.../devicetree/bindings/leds/irled/spi-ir-led.txt | 29 +++
drivers/hid/hid-picolcd_cir.c | 3 +-
drivers/media/cec/cec-core.c | 3 +-
drivers/media/common/siano/smsir.c | 3 +-
drivers/media/i2c/ir-kbd-i2c.c | 2 +-
drivers/media/pci/bt8xx/bttv-input.c | 2 +-
drivers/media/pci/cx23885/cx23885-input.c | 11 +-
drivers/media/pci/cx88/cx88-input.c | 3 +-
drivers/media/pci/dm1105/dm1105.c | 3 +-
drivers/media/pci/mantis/mantis_input.c | 2 +-
drivers/media/pci/saa7134/saa7134-input.c | 2 +-
drivers/media/pci/smipcie/smipcie-ir.c | 3 +-
drivers/media/pci/ttpci/budget-ci.c | 2 +-
drivers/media/rc/Kconfig | 9 +
drivers/media/rc/Makefile | 1 +
drivers/media/rc/ati_remote.c | 3 +-
drivers/media/rc/ene_ir.c | 3 +-
drivers/media/rc/fintek-cir.c | 3 +-
drivers/media/rc/gpio-ir-recv.c | 3 +-
drivers/media/rc/igorplugusb.c | 3 +-
drivers/media/rc/iguanair.c | 3 +-
drivers/media/rc/img-ir/img-ir-hw.c | 2 +-
drivers/media/rc/img-ir/img-ir-raw.c | 3 +-
drivers/media/rc/imon.c | 3 +-
drivers/media/rc/ir-hix5hd2.c | 3 +-
drivers/media/rc/ir-spi.c | 199 +++++++++++++++++++++
drivers/media/rc/ite-cir.c | 3 +-
drivers/media/rc/mceusb.c | 3 +-
drivers/media/rc/meson-ir.c | 3 +-
drivers/media/rc/nuvoton-cir.c | 3 +-
drivers/media/rc/rc-ir-raw.c | 17 +-
drivers/media/rc/rc-loopback.c | 3 +-
drivers/media/rc/rc-main.c | 186 +++++++++++--------
drivers/media/rc/redrat3.c | 3 +-
drivers/media/rc/serial_ir.c | 3 +-
drivers/media/rc/st_rc.c | 3 +-
drivers/media/rc/streamzap.c | 3 +-
drivers/media/rc/sunxi-cir.c | 3 +-
drivers/media/rc/ttusbir.c | 3 +-
drivers/media/rc/winbond-cir.c | 3 +-
drivers/media/usb/au0828/au0828-input.c | 3 +-
drivers/media/usb/cx231xx/cx231xx-input.c | 2 +-
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 3 +-
drivers/media/usb/dvb-usb/dvb-usb-remote.c | 3 +-
drivers/media/usb/em28xx/em28xx-input.c | 2 +-
drivers/media/usb/tm6000/tm6000-input.c | 3 +-
include/media/rc-core.h | 15 +-
47 files changed, 408 insertions(+), 168 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
create mode 100644 drivers/media/rc/ir-spi.c
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v5 2/6] [media] rc-main: split setup and unregister functions
From: Andi Shyti @ 2016-12-18 9:06 UTC (permalink / raw)
To: Sean Young
Cc: Mauro Carvalho Chehab, Rob Herring, Mark Rutland, Richard Purdie,
Jacek Anaszewski, Heiner Kallweit, linux-media, devicetree,
linux-leds, linux-kernel, Andi Shyti
In-Reply-To: <20161216141629.GA32757@gofer.mess.org>
Hi Sean,
> On Fri, Dec 16, 2016 at 12:10:26PM +0000, Sean Young wrote:
> > Sorry to add to your woes, but there are some checkpatch warnings and
> > errors. Please can you correct these. One is below.
>
> Actually, the changes are pretty minor, I can fix them up before sending
> them to Mauro. Sorry for bothering you.
yes, it's an error on the previous code:
ERROR: do not initialise statics to false
#109: FILE: drivers/media/rc/rc-main.c:1521:
+ static bool raw_init = false; /* raw decoders loaded? */
total: 1 errors, 0 warnings, 196 lines checked
I noticed this already before, but I preferred to leave it
in its original status.
No worries, if you want I will send the fix, it's indeed quite
an easy fix.
Thanks,
Andi
^ permalink raw reply
* Re: [PATCH] spi: rockchip: support "sleep" pin configuration
From: Caesar Wang @ 2016-12-18 7:41 UTC (permalink / raw)
To: Brian Norris, Mark Brown
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-spi-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Caesar Wang
In-Reply-To: <1481936356-76161-1-git-send-email-briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
在 2016年12月17日 08:59, Brian Norris 写道:
> In the pattern of many other devices, support a system-sleep pin
> configuration.
>
> Signed-off-by: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Tested-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
> Documentation/devicetree/bindings/spi/spi-rockchip.txt | 7 +++++++
> drivers/spi/spi-rockchip.c | 5 +++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> index d2ca153614f9..83da4931d832 100644
> --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
> @@ -31,6 +31,10 @@ Optional Properties:
> - rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
> Rx data (may need to be fine tuned for high capacitance lines).
> No delay (0) by default.
> +- pinctrl-names: Names for the pin configuration(s); may be "default" or
> + "sleep", where the "sleep" configuration may describe the state
> + the pins should be in during system suspend. See also
> + pinctrl/pinctrl-bindings.txt.
>
>
> Example:
> @@ -46,4 +50,7 @@ Example:
> interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
> clock-names = "spiclk", "apb_pclk";
> + pinctrl-0 = <&spi1_pins>;
> + pinctrl-1 = <&spi1_sleep>;
> + pinctrl-names = "default", "sleep";
> };
> diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
> index 0f89c2169c24..acf31f36b898 100644
> --- a/drivers/spi/spi-rockchip.c
> +++ b/drivers/spi/spi-rockchip.c
> @@ -17,6 +17,7 @@
> #include <linux/dmaengine.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> #include <linux/spi/spi.h>
> #include <linux/pm_runtime.h>
> @@ -843,6 +844,8 @@ static int rockchip_spi_suspend(struct device *dev)
> clk_disable_unprepare(rs->apb_pclk);
> }
>
> + pinctrl_pm_select_sleep_state(dev);
> +
> return ret;
> }
>
> @@ -852,6 +855,8 @@ static int rockchip_spi_resume(struct device *dev)
> struct spi_master *master = dev_get_drvdata(dev);
> struct rockchip_spi *rs = spi_master_get_devdata(master);
>
> + pinctrl_pm_select_default_state(dev);
> +
> if (!pm_runtime_suspended(dev)) {
> ret = clk_prepare_enable(rs->apb_pclk);
> if (ret < 0)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v9 2/4] vcodec: mediatek: Add Mediatek JPEG Decoder Driver
From: Ricky Liang @ 2016-12-18 6:53 UTC (permalink / raw)
To: Rick Chang
Cc: Hans Verkuil, Laurent Pinchart, Mauro Carvalho Chehab,
Matthias Brugger, Rob Herring, Bin Liu,
open list:OPEN FIRMWARE AND..., Minghsiu Tsai, srv_heupstream,
open list, moderated list:ARM/Mediatek SoC...,
moderated list:ARM/Mediatek SoC..., linux-media
In-Reply-To: <1481702690-10476-3-git-send-email-rick.chang@mediatek.com>
On Wed, Dec 14, 2016 at 4:04 PM, Rick Chang <rick.chang@mediatek.com> wrote:
> Add v4l2 driver for Mediatek JPEG Decoder
>
> Signed-off-by: Rick Chang <rick.chang@mediatek.com>
> Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
> ---
> drivers/media/platform/Kconfig | 15 +
> drivers/media/platform/Makefile | 2 +
> drivers/media/platform/mtk-jpeg/Makefile | 2 +
> drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 1306 ++++++++++++++++++++++
> drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 139 +++
> drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c | 417 +++++++
> drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h | 91 ++
> drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c | 160 +++
> drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h | 25 +
> drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h | 58 +
> 10 files changed, 2215 insertions(+)
Reviewed-by: Ricky Liang <jcliang@chromium.org>
Tested-by: Ricky Liang <jcliang@chromium.org>
^ permalink raw reply
* [PATCH v10 3/3] fpga: Add support for Lattice iCE40 FPGAs
From: Joel Holdsworth @ 2016-12-18 5:33 UTC (permalink / raw)
To: atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx,
moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w,
robh-DgEjT+Ai2ygdnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-spi-u79uwXL29TY76Z2rM5mHXA, marex-ynQEQJNshbs,
linux-fpga-u79uwXL29TY76Z2rM5mHXA
Cc: Joel Holdsworth
In-Reply-To: <1482039234-21335-1-git-send-email-joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
This patch adds support to the FPGA manager for configuring the SRAM of
iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40
UltraPlus devices, through slave SPI.
Signed-off-by: Joel Holdsworth <joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>
Reviewed-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Reviewed-by: Moritz Fischer <moritz.fischer-+aYTwkv1SeIAvxtiuMwx3w@public.gmane.org>
Acked-by: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
---
drivers/fpga/Kconfig | 6 ++
drivers/fpga/Makefile | 1 +
drivers/fpga/ice40-spi.c | 219 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 226 insertions(+)
create mode 100644 drivers/fpga/ice40-spi.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index ce861a2..967cda4 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -20,6 +20,12 @@ config FPGA_REGION
FPGA Regions allow loading FPGA images under control of
the Device Tree.
+config FPGA_MGR_ICE40_SPI
+ tristate "Lattice iCE40 SPI"
+ depends on OF && SPI
+ help
+ FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
+
config FPGA_MGR_SOCFPGA
tristate "Altera SOCFPGA FPGA Manager"
depends on ARCH_SOCFPGA || COMPILE_TEST
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 8df07bc..cc0d364 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_FPGA) += fpga-mgr.o
# FPGA Manager Drivers
+obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/ice40-spi.c
new file mode 100644
index 0000000..16ea2c6
--- /dev/null
+++ b/drivers/fpga/ice40-spi.c
@@ -0,0 +1,219 @@
+/*
+ * FPGA Manager Driver for Lattice iCE40.
+ *
+ * Copyright (c) 2016 Joel Holdsworth
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This driver adds support to the FPGA manager for configuring the SRAM of
+ * Lattice iCE40 FPGAs through slave SPI.
+ */
+
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/stringify.h>
+
+#define ICE40_SPI_MAX_SPEED 25000000 /* Hz */
+#define ICE40_SPI_MIN_SPEED 1000000 /* Hz */
+
+#define ICE40_SPI_RESET_DELAY 1 /* us (>200ns) */
+#define ICE40_SPI_HOUSEKEEPING_DELAY 1200 /* us */
+
+#define ICE40_SPI_NUM_ACTIVATION_BYTES DIV_ROUND_UP(49, 8)
+
+struct ice40_fpga_priv {
+ struct spi_device *dev;
+ struct gpio_desc *reset;
+ struct gpio_desc *cdone;
+};
+
+static enum fpga_mgr_states ice40_fpga_ops_state(struct fpga_manager *mgr)
+{
+ struct ice40_fpga_priv *priv = mgr->priv;
+
+ return gpiod_get_value(priv->cdone) ? FPGA_MGR_STATE_OPERATING :
+ FPGA_MGR_STATE_UNKNOWN;
+}
+
+static int ice40_fpga_ops_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
+ const char *buf, size_t count)
+{
+ struct ice40_fpga_priv *priv = mgr->priv;
+ struct spi_device *dev = priv->dev;
+ struct spi_message message;
+ struct spi_transfer assert_cs_then_reset_delay = {
+ .cs_change = 1,
+ .delay_usecs = ICE40_SPI_RESET_DELAY
+ };
+ struct spi_transfer housekeeping_delay_then_release_cs = {
+ .delay_usecs = ICE40_SPI_HOUSEKEEPING_DELAY
+ };
+ int ret;
+
+ if ((info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+ dev_err(&dev->dev,
+ "Partial reconfiguration is not supported\n");
+ return -ENOTSUPP;
+ }
+
+ /* Lock the bus, assert CRESET_B and SS_B and delay >200ns */
+ spi_bus_lock(dev->master);
+
+ gpiod_set_value(priv->reset, 1);
+
+ spi_message_init(&message);
+ spi_message_add_tail(&assert_cs_then_reset_delay, &message);
+ ret = spi_sync_locked(dev, &message);
+
+ /* Come out of reset */
+ gpiod_set_value(priv->reset, 0);
+
+ /* Abort if the chip-select failed */
+ if (ret)
+ goto fail;
+
+ /* Check CDONE is de-asserted i.e. the FPGA is reset */
+ if (gpiod_get_value(priv->cdone)) {
+ dev_err(&dev->dev, "Device reset failed, CDONE is asserted\n");
+ ret = -EIO;
+ goto fail;
+ }
+
+ /* Wait for the housekeeping to complete, and release SS_B */
+ spi_message_init(&message);
+ spi_message_add_tail(&housekeeping_delay_then_release_cs, &message);
+ ret = spi_sync_locked(dev, &message);
+
+fail:
+ spi_bus_unlock(dev->master);
+
+ return ret;
+}
+
+static int ice40_fpga_ops_write(struct fpga_manager *mgr,
+ const char *buf, size_t count)
+{
+ struct ice40_fpga_priv *priv = mgr->priv;
+
+ return spi_write(priv->dev, buf, count);
+}
+
+static int ice40_fpga_ops_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
+{
+ struct ice40_fpga_priv *priv = mgr->priv;
+ struct spi_device *dev = priv->dev;
+ const u8 padding[ICE40_SPI_NUM_ACTIVATION_BYTES] = {0};
+
+ /* Check CDONE is asserted */
+ if (!gpiod_get_value(priv->cdone)) {
+ dev_err(&dev->dev,
+ "CDONE was not asserted after firmware transfer\n");
+ return -EIO;
+ }
+
+ /* Send of zero-padding to activate the firmware */
+ return spi_write(dev, padding, sizeof(padding));
+}
+
+static const struct fpga_manager_ops ice40_fpga_ops = {
+ .state = ice40_fpga_ops_state,
+ .write_init = ice40_fpga_ops_write_init,
+ .write = ice40_fpga_ops_write,
+ .write_complete = ice40_fpga_ops_write_complete,
+};
+
+static int ice40_fpga_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct device_node *np = spi->dev.of_node;
+ struct ice40_fpga_priv *priv;
+ int ret;
+
+ if (!np) {
+ dev_err(dev, "No Device Tree entry\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = spi;
+
+ /* Check board setup data. */
+ if (spi->max_speed_hz > ICE40_SPI_MAX_SPEED) {
+ dev_err(dev, "SPI speed is too high, maximum speed is "
+ __stringify(ICE40_SPI_MAX_SPEED) "\n");
+ return -EINVAL;
+ }
+
+ if (spi->max_speed_hz < ICE40_SPI_MIN_SPEED) {
+ dev_err(dev, "SPI speed is too low, minimum speed is "
+ __stringify(ICE40_SPI_MIN_SPEED) "\n");
+ return -EINVAL;
+ }
+
+ if (spi->mode & SPI_CPHA) {
+ dev_err(dev, "Bad SPI mode, CPHA not supported\n");
+ return -EINVAL;
+ }
+
+ /* Set up the GPIOs */
+ priv->cdone = devm_gpiod_get(dev, "cdone", GPIOD_IN);
+ if (IS_ERR(priv->cdone)) {
+ dev_err(dev, "Failed to get CDONE GPIO: %ld\n",
+ PTR_ERR(priv->cdone));
+ return -EINVAL;
+ }
+
+ priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->reset)) {
+ dev_err(dev, "Failed to get CRESET_B GPIO: %ld\n",
+ PTR_ERR(priv->reset));
+ return -EINVAL;
+ }
+
+ /* Register with the FPGA manager */
+ ret = fpga_mgr_register(dev, "Lattice iCE40 FPGA Manager",
+ &ice40_fpga_ops, priv);
+ if (ret) {
+ dev_err(dev, "Unable to register FPGA manager");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ice40_fpga_remove(struct spi_device *spi)
+{
+ fpga_mgr_unregister(&spi->dev);
+ return 0;
+}
+
+static const struct of_device_id ice40_fpga_of_match[] = {
+ { .compatible = "lattice,ice40-fpga-mgr", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ice40_fpga_of_match);
+
+static struct spi_driver ice40_fpga_driver = {
+ .probe = ice40_fpga_probe,
+ .remove = ice40_fpga_remove,
+ .driver = {
+ .name = "ice40spi",
+ .of_match_table = of_match_ptr(ice40_fpga_of_match),
+ },
+};
+
+module_spi_driver(ice40_fpga_driver);
+
+MODULE_AUTHOR("Joel Holdsworth <joel-IJEoVVyKhCJXvIrf17iDB/XRex20P6io@public.gmane.org>");
+MODULE_DESCRIPTION("Lattice iCE40 FPGA Manager");
+MODULE_LICENSE("GPL v2");
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v10 2/3] Documentation: Add binding document for Lattice iCE40 FPGA manager
From: Joel Holdsworth @ 2016-12-18 5:33 UTC (permalink / raw)
To: atull, moritz.fischer, robh, devicetree, linux-kernel, linux-spi,
marex, linux-fpga
Cc: Joel Holdsworth
In-Reply-To: <1482039234-21335-1-git-send-email-joel@airwebreathe.org.uk>
This adds documentation of the device tree bindings of the Lattice iCE40
FPGA driver for the FPGA manager framework.
Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Acked-by: Marek Vasut <marex@denx.de>
---
.../bindings/fpga/lattice-ice40-fpga-mgr.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
new file mode 100644
index 0000000..7e7a78b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
@@ -0,0 +1,21 @@
+Lattice iCE40 FPGA Manager
+
+Required properties:
+- compatible: Should contain "lattice,ice40-fpga-mgr"
+- reg: SPI chip select
+- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000)
+- cdone-gpios: GPIO input connected to CDONE pin
+- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note
+ that unless the GPIO is held low during startup, the
+ FPGA will enter Master SPI mode and drive SCK with a
+ clock signal potentially jamming other devices on the
+ bus until the firmware is loaded.
+
+Example:
+ ice40: ice40@0 {
+ compatible = "lattice,ice40-fpga-mgr";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
--
2.7.4
^ permalink raw reply related
* [PATCH v10 1/3] of: Add vendor prefix for Lattice Semiconductor
From: Joel Holdsworth @ 2016-12-18 5:33 UTC (permalink / raw)
To: atull, moritz.fischer, robh, devicetree, linux-kernel, linux-spi,
marex, linux-fpga
Cc: Joel Holdsworth
Lattice Semiconductor Corporation is a manufacturer of integrated
circuits and IP products, including low-power FPGAs, video connectivity
devices and millimeter wave wireless products.
Website: http://latticesemi.com
Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 64fdc8c..7a87932 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -158,6 +158,7 @@ kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
lacie LaCie
lantiq Lantiq Semiconductor
+lattice Lattice Semiconductor
lenovo Lenovo Group Ltd.
lg LG Corporation
linux Linux-specific binding
--
2.7.4
^ permalink raw reply related
* RE: [RFC PATCH] iommu/arm-smmu: Add global SMR masking property
From: Nipun Gupta @ 2016-12-17 21:06 UTC (permalink / raw)
To: Robin Murphy,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org, Stuart Yoder
In-Reply-To: <ad6b6a4937b1fe183e6d48ccbaf4cb46db92fed4.1481893907.git.robin.murphy-5wv7dgnIgG8@public.gmane.org>
> -----Original Message-----
> From: iommu-bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org [mailto:iommu-
> bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org] On Behalf Of Robin Murphy
> Sent: Friday, December 16, 2016 18:49
> To: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-arm-
> kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org; will.deacon-5wv7dgnIgG8@public.gmane.org; Stuart Yoder
> <stuart.yoder-3arQi8VN3Tc@public.gmane.org>
> Subject: [RFC PATCH] iommu/arm-smmu: Add global SMR masking property
>
> The current SMR masking support using a 2-cell iommu-specifier is
> primarily intended to handle individual masters with large and/or
> complex Stream ID assignments; it quickly gets a bit clunky in other SMR
> use-cases where we just want to consistently mask out the same part of
> every Stream ID (e.g. for MMU-500 configurations where the appended TBU
> number gets in the way unnecessarily). Let's add a new property to allow
> a single global mask value to better fit the latter situation.
>
> CC: Stuart Yoder <stuart.yoder-3arQi8VN3Tc@public.gmane.org>
Tested-by: Nipun Gupta <nipun.gupta-3arQi8VN3Tc@public.gmane.org>
> Signed-off-by: Robin Murphy <robin.murphy-5wv7dgnIgG8@public.gmane.org>
> ---
>
> Compile-tested only...
>
> Documentation/devicetree/bindings/iommu/arm,smmu.txt | 8 ++++++++
> drivers/iommu/arm-smmu.c | 4 +++-
> 2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> index e862d1485205..98f5cbe5fdb4 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> @@ -60,6 +60,14 @@ conditions.
> aliases of secure registers have to be used during
> SMMU configuration.
>
> +- stream-match-mask : Specifies a fixed SMR mask value to combine with
> + the Stream ID value from every iommu-specifier. This
> + may be used instead of an "#iommu-cells" value of 2
> + when there is no need for per-master SMR masks, but
> + it is still desired to mask some portion of every
> + Stream ID (e.g. for certain MMU-500 configurations
> + given globally unique external IDs).
> +
> ** Deprecated properties:
>
> - mmu-masters (deprecated in favour of the generic "iommus" binding) :
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index 8f7281444551..f1abcb7dde36 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -1534,13 +1534,15 @@ static int arm_smmu_domain_set_attr(struct
> iommu_domain *domain,
>
> static int arm_smmu_of_xlate(struct device *dev, struct of_phandle_args *args)
> {
> - u32 fwid = 0;
> + u32 mask, fwid = 0;
>
> if (args->args_count > 0)
> fwid |= (u16)args->args[0];
>
> if (args->args_count > 1)
> fwid |= (u16)args->args[1] << SMR_MASK_SHIFT;
> + else if (!of_property_read_u32(args->np, "stream-match-mask",
> &mask))
> + fwid |= (u16)mask << SMR_MASK_SHIFT;
>
> return iommu_fwspec_add_ids(dev, &fwid, 1);
> }
> --
> 2.10.2.dirty
>
> _______________________________________________
> iommu mailing list
> iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply
* Re: [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay
From: Martin Blumenstingl @ 2016-12-17 20:36 UTC (permalink / raw)
To: khilman-rdvid1DuHRBWk0Htik3J/w
Cc: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
carlo-KA+7E9HrN00dnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, will.deacon-5wv7dgnIgG8,
catalin.marinas-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, Martin Blumenstingl
In-Reply-To: <20161202234739.22929-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Hi Kevin,
On Sat, Dec 3, 2016 at 12:47 AM, Martin Blumenstingl
<martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> wrote:
> This partially fixes the 1000Mbit/s ethernet TX throughput issues (on
> networks which are not affected by the EEE problem, as reported here:
> [1]).
> The actual problem for the TX throughput issues was that the TX delay
> was applied twice:
> - once "accidentally" by the PHY (this was fixed with [2])
> - once by the MAC because there was a hardcoded TX delay (of 2ns),
> this will be configurable with the changes from [0]
>
> These are the dts changes which belong to my other series (in v2
> these patches were part of the other series, upon request of the
> net maintainers I have split the .dts changes into their own series so
> we are able to take both through different trees):
> "[PATCH net-next v3 0/2] stmmac: dwmac-meson8b: configurable
> RGMII TX delay": [0].
> Thus this series depends on the ACK for the binding changes in the
> other series!
>
> I based these changes on my other series "[PATCH v2 0/2] GXL and GXM
> SCPI improvements": [3]
the DT binding changes for the meson8b-dwmac driver were ACK'ed by Rob
Herring, so you can proceed with this series once you applied the SCPI
patches.
Thank you!
Regards,
Martin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH] Documentation: dt: Explicitly mark Samsung Exynos SoC bindings as unstable
From: Krzysztof Kozlowski @ 2016-12-17 19:37 UTC (permalink / raw)
To: Marek Szyprowski
Cc: linux-samsung-soc, devicetree, linux-arm-kernel, Rob Herring,
Mark Rutland, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Javier Martinez Canillas, Kukjin Kim, Inki Dae, Seung-Woo Kim,
Chanwoo Choi, Sylwester Nawrocki
In-Reply-To: <1481897676-13578-1-git-send-email-m.szyprowski@samsung.com>
On Fri, Dec 16, 2016 at 03:14:36PM +0100, Marek Szyprowski wrote:
> Samsung Exynos SoCs and boards related bindings evolved since the initial
> introduction, but initially the bindings were minimal and a bit incomplete
> (they never described all the hardware modules available in the SoCs).
> Since then some significant (not fully compatible) changes have been
> already committed a few times (like gpio replaced by pinctrl, display ddc,
> mfc reserved memory, some core clocks added to various hardware modules,
> added more required nodes).
>
> On the other side there are no boards which have device tree embedded in
> the bootloader. Device tree blob is always compiled from the kernel tree
> and updated together with the kernel image.
>
> Thus to avoid further adding a bunch of workarounds for old/missing
> bindings and allow to make cleanup of the existing code and device tree
> files, lets mark Samsung Exynos SoC platform bindings as unstable. This
> means that bindings can may change at any time and users should use the
> dtb file compiled from the same kernel source tree as the kernel image.
I agree but please re-send it after merge window. This is not the best
time to start discussions about it.
Best regards,
Krzysztof
^ permalink raw reply
* [PATCH net-next v4 2/2] net: stmmac: dwmac-meson8b: make the RGMII TX delay configurable
From: Martin Blumenstingl @ 2016-12-17 18:21 UTC (permalink / raw)
To: davem, netdev, devicetree, linux-amlogic, robh+dt, mark.rutland,
carlo, khilman
Cc: peppe.cavallaro, alexandre.torgue, linux-arm-kernel,
Martin Blumenstingl
In-Reply-To: <20161217182119.4037-1-martin.blumenstingl@googlemail.com>
Prior to this patch we were using a hardcoded RGMII TX clock delay of
2ns (= 1/4 cycle of the 125MHz RGMII TX clock). This value works for
many boards, but unfortunately not for all (due to the way the actual
circuit is designed, sometimes because the TX delay is enabled in the
PHY, etc.). Making the TX delay on the MAC side configurable allows us
to support all possible hardware combinations.
This allows fixing a compatibility issue on some boards, where the
RTL8211F PHY is configured to generate the TX delay. We can now turn
off the TX delay in the MAC, because otherwise we would be applying the
delay twice (which results in non-working TX traffic).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index ffaed1f35efe..db970cd6600f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -35,10 +35,6 @@
#define PRG_ETH0_TXDLY_SHIFT 5
#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
-#define PRG_ETH0_TXDLY_OFF (0x0 << PRG_ETH0_TXDLY_SHIFT)
-#define PRG_ETH0_TXDLY_QUARTER (0x1 << PRG_ETH0_TXDLY_SHIFT)
-#define PRG_ETH0_TXDLY_HALF (0x2 << PRG_ETH0_TXDLY_SHIFT)
-#define PRG_ETH0_TXDLY_THREE_QUARTERS (0x3 << PRG_ETH0_TXDLY_SHIFT)
/* divider for the result of m250_sel */
#define PRG_ETH0_CLK_M250_DIV_SHIFT 7
@@ -69,6 +65,8 @@ struct meson8b_dwmac {
struct clk_divider m25_div;
struct clk *m25_div_clk;
+
+ u32 tx_delay_ns;
};
static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
@@ -179,6 +177,7 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
{
int ret;
unsigned long clk_rate;
+ u8 tx_dly_val;
switch (dwmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
@@ -196,9 +195,13 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_INVERTED_RMII_CLK, 0);
- /* TX clock delay - all known boards use a 1/4 cycle delay */
+ /* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
+ * 8ns are exactly one cycle of the 125MHz RGMII TX clock):
+ * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
+ */
+ tx_dly_val = dwmac->tx_delay_ns >> 1;
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
- PRG_ETH0_TXDLY_QUARTER);
+ tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
break;
case PHY_INTERFACE_MODE_RMII:
@@ -282,6 +285,12 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "missing phy-mode property\n");
ret = -EINVAL;
goto err_remove_config_dt;
+ } else if (dwmac->phy_mode != PHY_INTERFACE_MODE_RMII) {
+ /* ignore errors as this is an optional property - by default
+ * we assume a TX delay of 0ns.
+ */
+ of_property_read_u32(pdev->dev.of_node, "amlogic,tx-delay-ns",
+ &dwmac->tx_delay_ns);
}
ret = meson8b_init_clk(dwmac);
--
2.11.0
^ permalink raw reply related
* [PATCH net-next v4 1/2] net: dt-bindings: add RGMII TX delay configuration to meson8b-dwmac
From: Martin Blumenstingl @ 2016-12-17 18:21 UTC (permalink / raw)
To: davem, netdev, devicetree, linux-amlogic, robh+dt, mark.rutland,
carlo, khilman
Cc: peppe.cavallaro, alexandre.torgue, linux-arm-kernel,
Martin Blumenstingl
In-Reply-To: <20161217182119.4037-1-martin.blumenstingl@googlemail.com>
This allows configuring the RGMII TX clock delay. The RGMII clock is
generated by underlying hardware of the the Meson 8b / GXBB DWMAC glue.
The configuration depends on the actual hardware (no delay may be
needed due to the design of the actual circuit, the PHY might add this
delay, etc.).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/net/meson-dwmac.txt | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt
index 89e62ddc69ca..f8bc54094e3c 100644
--- a/Documentation/devicetree/bindings/net/meson-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt
@@ -25,6 +25,20 @@ Required properties on Meson8b and newer:
- "clkin0" - first parent clock of the internal mux
- "clkin1" - second parent clock of the internal mux
+Optional properties on Meson8b and newer:
+- amlogic,tx-delay-ns: The internal RGMII TX clock delay (provided
+ by this driver) in nanoseconds. Allowed values
+ are: 0ns, 2ns, 4ns, 6ns.
+ This must be configured when the phy-mode is
+ "rgmii" (typically a value of 2ns is used in
+ this case).
+ When phy-mode is set to "rgmii-id" or
+ "rgmii-txid" the TX clock delay is already
+ provided by the PHY. In that case this
+ property should be set to 0ns (which disables
+ the TX clock delay in the MAC to prevent the
+ clock from going off because both PHY and MAC
+ are adding a delay).
Example for Meson6:
--
2.11.0
^ permalink raw reply related
* [PATCH net-next v4 0/2] stmmac: dwmac-meson8b: configurable RGMII TX delay
From: Martin Blumenstingl @ 2016-12-17 18:21 UTC (permalink / raw)
To: davem-fT/PcQaiUtIeIZ0/mPfg9Q, netdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
carlo-KA+7E9HrN00dnm+yROfE0A, khilman-rdvid1DuHRBWk0Htik3J/w
Cc: peppe.cavallaro-qxv4g6HH51o, alexandre.torgue-qxv4g6HH51o,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Martin Blumenstingl
In-Reply-To: <20161202233238.17561-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Currently the dwmac-meson8b stmmac glue driver uses a hardcoded 1/4
cycle (= 2ns) TX clock delay. This seems to work fine for many boards
(for example Odroid-C2 or Amlogic's reference boards) but there are
some others where TX traffic is simply broken.
There are probably multiple reasons why it's working on some boards
while it's broken on others:
- some of Amlogic's reference boards are using a Micrel PHY
- hardware circuit design
- maybe more...
iperf3 results on my Mecool BB2 board (Meson GXM, RTL8211F PHY) with
TX clock delay disabled on the MAC (as it's enabled in the PHY driver).
TX throughput was virtually zero before:
$ iperf3 -c 192.168.1.100 -R
Connecting to host 192.168.1.100, port 5201
Reverse mode, remote host 192.168.1.100 is sending
[ 4] local 192.168.1.206 port 52828 connected to 192.168.1.100 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 108 MBytes 901 Mbits/sec
[ 4] 1.00-2.00 sec 94.2 MBytes 791 Mbits/sec
[ 4] 2.00-3.00 sec 96.5 MBytes 810 Mbits/sec
[ 4] 3.00-4.00 sec 96.2 MBytes 808 Mbits/sec
[ 4] 4.00-5.00 sec 96.6 MBytes 810 Mbits/sec
[ 4] 5.00-6.00 sec 96.5 MBytes 810 Mbits/sec
[ 4] 6.00-7.00 sec 96.6 MBytes 810 Mbits/sec
[ 4] 7.00-8.00 sec 96.5 MBytes 809 Mbits/sec
[ 4] 8.00-9.00 sec 105 MBytes 884 Mbits/sec
[ 4] 9.00-10.00 sec 111 MBytes 934 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 1000 MBytes 839 Mbits/sec 0 sender
[ 4] 0.00-10.00 sec 998 MBytes 837 Mbits/sec receiver
iperf Done.
$ iperf3 -c 192.168.1.100
Connecting to host 192.168.1.100, port 5201
[ 4] local 192.168.1.206 port 52832 connected to 192.168.1.100 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.01 sec 99.5 MBytes 829 Mbits/sec 117 139 KBytes
[ 4] 1.01-2.00 sec 105 MBytes 884 Mbits/sec 129 70.7 KBytes
[ 4] 2.00-3.01 sec 107 MBytes 889 Mbits/sec 106 187 KBytes
[ 4] 3.01-4.01 sec 105 MBytes 878 Mbits/sec 92 143 KBytes
[ 4] 4.01-5.00 sec 105 MBytes 882 Mbits/sec 140 129 KBytes
[ 4] 5.00-6.01 sec 106 MBytes 883 Mbits/sec 115 195 KBytes
[ 4] 6.01-7.00 sec 102 MBytes 863 Mbits/sec 133 70.7 KBytes
[ 4] 7.00-8.01 sec 106 MBytes 884 Mbits/sec 143 97.6 KBytes
[ 4] 8.01-9.01 sec 104 MBytes 875 Mbits/sec 124 107 KBytes
[ 4] 9.01-10.01 sec 105 MBytes 876 Mbits/sec 90 139 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.01 sec 1.02 GBytes 874 Mbits/sec 1189 sender
[ 4] 0.00-10.01 sec 1.02 GBytes 873 Mbits/sec receiver
iperf Done.
I get similar TX throughput on my Meson GXBB "MXQ Pro+" board when I
disable the PHY's TX-delay and configure a 4ms TX-delay on the MAC.
So changes to at least the RTL8211F PHY driver are needed to get it
working properly in all situations.
Changes since v3:
- rebased to apply against current net-next branch (fixes a conflict
with d2ed0a7755fe14c7 "net: ethernet: stmmac: fix of-node and
fixed-link-phydev leaks")
-
Changes since v2:
- moved all .dts patches (3-7) to a separate series
- removed the default 2ns TX delay when phy-mode RGMII is specified
- (rebased against current net-next)
Changes since v1:
- renamed the devicetree property "amlogic,tx-delay" to
"amlogic,tx-delay-ns", which makes the .dts easier to read as we can
simply specify human-readable values instead of having "preprocessor
defines and calculation in human brain". Thanks to Andrew Lunn for
the suggestion!
- improved documentation to indicate when the MAC TX-delay should be
configured and how to use the PHY's TX-delay
- changed the default TX-delay in the dwmac-meson8b driver from 2ns
to 0ms when any of the rgmii-*id modes are used (the 2ns default
value still applies for phy-mode "rgmii")
- added patches to properly reset the PHY on Meson GXBB devices and to
use a similar configuration than the one we use on Meson GXL devices
(by passing a phy-handle to stmmac and defining the PHY in the mdio0
bus - patch 3-6)
- add the "amlogic,tx-delay-ns" property to all boards which are using
the RGMII PHY (patch 7)
Martin Blumenstingl (2):
net: dt-bindings: add RGMII TX delay configuration to meson8b-dwmac
net: stmmac: dwmac-meson8b: make the RGMII TX delay configurable
.../devicetree/bindings/net/meson-dwmac.txt | 14 ++++++++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 21 +++++++++++++++------
2 files changed, 29 insertions(+), 6 deletions(-)
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v3 0/2] power: supply: add sbs-charger driver
From: Sebastian Reichel @ 2016-12-17 16:33 UTC (permalink / raw)
To: Nicolas Saenz Julienne; +Cc: mark.rutland, linux-kernel, devicetree, linux-pm
In-Reply-To: <dd0728de-822a-0aee-0aea-8256843b39d0@prodys.net>
[-- Attachment #1: Type: text/plain, Size: 1431 bytes --]
Hi,
On Tue, Dec 13, 2016 at 11:41:01AM +0100, Nicolas Saenz Julienne wrote:
> On 24/11/16 13:33, Nicolas Saenz Julienne wrote:
> > Hi,
> >
> > This series adds support for all SBS compatible battery chargers, as defined
> > here: http://sbs-forum.org/specs/sbc110.pdf.
> >
> > The first patch changes the sbs-battery device name in order to be able to
> > create a proper supplier/supplied relation between the two of them.
> >
> > The second introduces the driver.
> >
> > Regards,
> > Nicolas
> >
> > changes since v2:
> > - updated driver and dt-binding with Sebatian's comments
> >
> > changes since v1:
> > - added dt bindings
> > - updated driver with Sebastian's comments
> > - s/Nicola/Nicolas/ in commits
> >
> > Nicolas Saenz Julienne (2):
> > power: supply: add sbs-charger driver
> > dt-bindings: power: add bindings for sbs-charger
> >
> > .../bindings/power/supply/sbs_sbs-charger.txt | 24 ++
> > drivers/power/supply/Kconfig | 6 +
> > drivers/power/supply/Makefile | 1 +
> > drivers/power/supply/sbs-charger.c | 275 +++++++++++++++++++++
> > 4 files changed, 306 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> > create mode 100644 drivers/power/supply/sbs-charger.c
> >
> Hi,
> any update?
Sorry, I was busy.
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* Re: [PATCH v3 2/2] dt-bindings: power: add bindings for sbs-charger
From: Sebastian Reichel @ 2016-12-17 16:32 UTC (permalink / raw)
To: Nicolas Saenz Julienne
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-pm-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1479990823-25841-3-git-send-email-nicolas.saenz-gbiq2sxWoaasTnJN9+BGXg@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1987 bytes --]
Hi,
On Thu, Nov 24, 2016 at 01:33:43PM +0100, Nicolas Saenz Julienne wrote:
> Adds device tree documentation for SBS charger compilant devices as defined
> here: http://sbs-forum.org/specs/sbc110.pdf
>
> Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz-gbiq2sxWoaasTnJN9+BGXg@public.gmane.org>
> ---
> v2 -> v3:
> - add part number as compatible
>
> .../bindings/power/supply/sbs_sbs-charger.txt | 24 ++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
>
> diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> new file mode 100644
> index 0000000..f6b6027
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> @@ -0,0 +1,24 @@
> +SBS sbs-charger
> +~~~~~~~~~~
> +
> +Required properties:
> + - compatible: should contain one of the following:
> + - "lltc,ltc4100"
> + - "sbs,sbs-charger"
That's not what I meant. The idea is to specify "lltc,ltc4100" with
"sbs,sbs-charger" as fallback. Then the driver for now only handles
"sbs,sbs-charger", but if any vendor registers need to be supported
we have a more specific compatible value in DT, that can be used to
identify the device.
> +Optional properties:
> +- interrupt-parent: Should be the phandle for the interrupt controller. Use in
> + conjunction with "interrupts".
> +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
> + "interrupt-parent". If an interrupt is not provided the driver will switch
> + automatically to polling.
> +
> +Example:
> +
> + ltc4100@9 {
> + compatible = "sbs,sbs-charger";
> + reg = <0x9>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + };
So the example would look like
compatible = "lltc,ltc4100", "sbs,sbs-charger";
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* Re: [PATCH v2 00/11] add support for VBUS max current and min voltage limits AXP20X and AXP22X PMICs
From: Sebastian Reichel @ 2016-12-17 15:54 UTC (permalink / raw)
To: Quentin Schulz
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
wens-jdAy2FN1RRM, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
lee.jones-QSEj5FYQhm4dnm+yROfE0A, linux-pm-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
In-Reply-To: <20161209110419.28981-1-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 2263 bytes --]
Hi Quentin,
On Fri, Dec 09, 2016 at 12:04:08PM +0100, Quentin Schulz wrote:
> The X-Powers AXP209 and AXP20X PMICs are able to set a limit for the
> VBUS power supply for both max current and min voltage supplied. This
> series of patch adds the possibility to set these limits from sysfs.
>
> Also, the AXP223 PMIC shares most of its behaviour with the AXP221 but
> the former can set the VBUS power supply max current to 100mA, unlike
> the latter. The AXP223 VBUS power supply driver used to probe on the
> AXP221 compatible. This series of patch introduces a new compatible for
> the AXP223 to be able to set the current max limit to 100mA.
>
> With that new compatible, boards having the AXP223 see their DT updated
> to use the VBUS power supply driver with the correct compatible.
>
> This series of patch also migrates from of_device_is_compatible function
> to the data field of of_device_id to identify the compatible used to
> probe. This improves the code readability.
>
> Mostly cosmetic changes in v2 and adding volatile and writeable regs to
> AXP20X and AXP22X MFD cells for the VBUS power supply driver.
>
> Quentin Schulz (11):
> power: supply: axp20x_usb_power: use of_device_id data field instead
> of device_is_compatible
> mfd: axp20x: add volatile and writeable reg ranges for VBUS power
> supply driver
> power: supply: axp20x_usb_power: set min voltage and max current from
> sysfs
> Documentation: DT: binding: axp20x_usb_power: add axp223 compatible
> power: supply: axp20x_usb_power: add 100mA max current limit for
> AXP223
> mfd: axp20x: add separate MFD cell for AXP223
> ARM: dtsi: add DTSI for AXP223
> ARM: dts: sun8i-a33-olinuxino: use AXP223 DTSI
> ARM: dts: sun8i-a33-sinlinx-sina33: use AXP223 DTSI
> ARM: dts: sun8i-r16-parrot: use AXP223 DTSI
> ARM: dtsi: sun8i-reference-design-tablet: use AXP223 DTSI
Thanks for your patchset. We are currently in the merge
window and patches 1 & 3-5 will appear in linux-next once
4.10-rc1 has been tagged by Linus Torvalds.
Until then I queued them into this branch:
https://git.kernel.org/cgit/linux/kernel/git/sre/linux-power-supply.git/log/?h=for-next-next
-- Sebastian
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox