* [PATCH 3/7] iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
From: Quentin Schulz @ 2016-12-20 10:27 UTC (permalink / raw)
To: jic23, knaack.h, lars, pmeerw, robh+dt, mark.rutland,
maxime.ripard, wens, lee.jones, linux, stefan.mavrodiev
Cc: thomas.petazzoni, devicetree, linux-iio, linux-kernel,
Quentin Schulz, linux-arm-kernel
In-Reply-To: <20161220102709.9504-1-quentin.schulz@free-electrons.com>
This adds support for the Allwinner A33 thermal sensor.
Unlike the A10, A13 and A31, the Allwinner A33 only has one channel
which is dedicated to the thermal sensor. Moreover, its thermal sensor
does not generate interruptions, thus we only need to directly read the
register storing the temperature value.
The MFD used by the A10, A13 and A31, was created to avoid breaking the
DT binding, but since the nodes for the ADC weren't there for the A33,
it is not needed.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
---
drivers/iio/adc/Kconfig | 21 ++--
drivers/iio/adc/sun4i-gpadc-iio.c | 204 ++++++++++++++++++++++++++++----------
include/linux/mfd/sun4i-gpadc.h | 4 +
3 files changed, 172 insertions(+), 57 deletions(-)
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 6a6d369..06041ff 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -437,17 +437,24 @@ config STX104
config SUN4I_GPADC
tristate "Support for the Allwinner SoCs GPADC"
depends on IIO
- depends on MFD_SUN4I_GPADC
- help
- Say yes here to build support for Allwinner (A10, A13 and A31) SoCs
- GPADC. This ADC provides 4 channels which can be used as an ADC or as
- a touchscreen input and one channel for thermal sensor.
-
- The thermal sensor slows down ADC readings and can be disabled by
+# MFD_SUN4I_GPADC is needed for sun4i, sun5i and sun6i but not for sun8i
+ select MFD_SUN4I_GPADC if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I
+# THERMAL_OF can be disabled on sun4i, sun5i and sun6i to quicken ADC readings
+ depends on THERMAL_OF || MACH_SUN4I || MACH_SUN5I || MACH_SUN6I
+ depends on !TOUCHSCREEN_SUN4I
+ help
+ Say yes here to build support for Allwinner (A10, A13, A31 and A33)
+ SoCs GPADC.
+
+ The ADC on A10, A13 and A31 provides 4 channels which can be used as
+ an ADC or as a touchscreen input and one channel for thermal sensor.
+ Their thermal sensor slows down ADC readings and can be disabled by
disabling CONFIG_THERMAL_OF. However, the thermal sensor should be
enabled by default since the SoC temperature is usually more critical
than ADC readings.
+ The ADC on A33 provides one channel for thermal sensor.
+
To compile this driver as a module, choose M here: the module will be
called sun4i-gpadc-iio.
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index a8e134f..8be694e 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -1,4 +1,4 @@
-/* ADC driver for sunxi platforms' (A10, A13 and A31) GPADC
+/* ADC driver for sunxi platforms' (A10, A13, A31 and A33) GPADC
*
* Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons.com>
*
@@ -85,6 +85,12 @@ static const struct gpadc_data sun6i_gpadc_data = {
.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
};
+static const struct gpadc_data sun8i_gpadc_data = {
+ .temp_offset = -1662,
+ .temp_scale = 162,
+ .tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
+};
+
struct sun4i_gpadc_iio {
struct iio_dev *indio_dev;
struct completion completion;
@@ -96,6 +102,7 @@ struct sun4i_gpadc_iio {
unsigned int temp_data_irq;
atomic_t ignore_temp_data_irq;
const struct gpadc_data *data;
+ bool use_dt;
/* prevents concurrent reads of temperature and ADC */
struct mutex mutex;
};
@@ -138,6 +145,23 @@ static const struct iio_chan_spec sun4i_gpadc_channels_no_temp[] = {
SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
};
+static const struct iio_chan_spec sun8i_gpadc_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ .datasheet_name = "temp_adc",
+ },
+};
+
+static const struct regmap_config sun4i_gpadc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .fast_io = true,
+};
+
static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel,
unsigned int irq)
{
@@ -231,7 +255,6 @@ static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
err:
pm_runtime_put_autosuspend(indio_dev->dev.parent);
mutex_unlock(&info->mutex);
-
return ret;
}
@@ -246,6 +269,19 @@ static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
{
struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+ int ret;
+
+ if (info->use_dt) {
+ pm_runtime_get_sync(indio_dev->dev.parent);
+
+ ret = regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
+ if (!ret)
+ pm_runtime_mark_last_busy(indio_dev->dev.parent);
+
+ pm_runtime_put_autosuspend(indio_dev->dev.parent);
+
+ return 0;
+ }
return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
}
@@ -410,7 +446,7 @@ static int sun4i_irq_init(struct platform_device *pdev, const char *name,
unsigned int *irq, atomic_t *atomic)
{
int ret;
- struct sun4i_gpadc_dev *mfd_dev = dev_get_drvdata(pdev->dev.parent);
+ struct sun4i_gpadc_dev *mfd_dev;
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(&pdev->dev));
/*
@@ -427,6 +463,8 @@ static int sun4i_irq_init(struct platform_device *pdev, const char *name,
*/
atomic_set(atomic, 1);
+ mfd_dev = dev_get_drvdata(pdev->dev.parent);
+
ret = platform_get_irq_byname(pdev, name);
if (ret < 0) {
dev_err(&pdev->dev, "no %s interrupt registered\n", name);
@@ -454,31 +492,68 @@ static int sun4i_irq_init(struct platform_device *pdev, const char *name,
return 0;
}
-static int sun4i_gpadc_probe(struct platform_device *pdev)
+static const struct of_device_id sun4i_gpadc_of_id[] = {
+ {
+ .compatible = "allwinner,sun8i-a33-gpadc-iio",
+ .data = &sun8i_gpadc_data,
+ },
+ { /* sentinel */ }
+};
+
+static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
+ struct iio_dev *indio_dev)
{
- struct sun4i_gpadc_iio *info;
- struct iio_dev *indio_dev;
+ struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+ const struct of_device_id *of_dev;
+ struct thermal_zone_device *tzd;
+ struct resource *mem;
+ void __iomem *base;
int ret;
- struct sun4i_gpadc_dev *sun4i_gpadc_dev;
- sun4i_gpadc_dev = dev_get_drvdata(pdev->dev.parent);
+ of_dev = of_match_device(sun4i_gpadc_of_id, &pdev->dev);
+ if (!of_dev)
+ return -ENODEV;
+
+ info->use_dt = true;
+ info->data = (struct gpadc_data *)of_dev->data;
+ indio_dev->num_channels = ARRAY_SIZE(sun8i_gpadc_channels);
+ indio_dev->channels = sun8i_gpadc_channels;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ info->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+ &sun4i_gpadc_regmap_config);
+ if (IS_ERR(info->regmap)) {
+ ret = PTR_ERR(info->regmap);
+ dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
+ return ret;
+ }
- indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
- if (!indio_dev)
- return -ENOMEM;
+ tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, info,
+ &sun4i_ts_tz_ops);
+ if (IS_ERR(tzd)) {
+ dev_err(&pdev->dev, "could not register thermal sensor: %ld\n",
+ PTR_ERR(tzd));
+ return PTR_ERR(tzd);
+ }
- info = iio_priv(indio_dev);
- platform_set_drvdata(pdev, indio_dev);
+ return 0;
+}
- mutex_init(&info->mutex);
+static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
+ struct iio_dev *indio_dev)
+{
+ struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+ struct sun4i_gpadc_dev *sun4i_gpadc_dev;
+ int ret;
+
+ info->use_dt = false;
+ sun4i_gpadc_dev = dev_get_drvdata(pdev->dev.parent);
info->regmap = sun4i_gpadc_dev->regmap;
- info->indio_dev = indio_dev;
- init_completion(&info->completion);
- indio_dev->name = dev_name(&pdev->dev);
- indio_dev->dev.parent = &pdev->dev;
- indio_dev->dev.of_node = pdev->dev.of_node;
- indio_dev->info = &sun4i_gpadc_iio_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
+
indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
indio_dev->channels = sun4i_gpadc_channels;
@@ -494,7 +569,6 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
* register the sensor if that option is enabled, eventually leaving
* that choice to the user.
*/
-
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
/*
* This driver is a child of an MFD which has a node in the DT
@@ -519,8 +593,7 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"could not register thermal sensor: %ld\n",
PTR_ERR(tzd));
- ret = PTR_ERR(tzd);
- goto err;
+ return PTR_ERR(tzd);
}
} else {
indio_dev->num_channels =
@@ -528,49 +601,78 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
indio_dev->channels = sun4i_gpadc_channels_no_temp;
}
- pm_runtime_set_autosuspend_delay(&pdev->dev,
- SUN4I_GPADC_AUTOSUSPEND_DELAY);
- pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_suspended(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
-
if (IS_ENABLED(CONFIG_THERMAL_OF)) {
ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING",
sun4i_gpadc_temp_data_irq_handler,
"temp_data", &info->temp_data_irq,
&info->ignore_temp_data_irq);
if (ret < 0)
- goto err;
- }
+ return ret;
- ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
- sun4i_gpadc_fifo_data_irq_handler, "fifo_data",
- &info->fifo_data_irq, &info->ignore_fifo_data_irq);
- if (ret < 0)
- goto err;
+ ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
+ sun4i_gpadc_fifo_data_irq_handler,
+ "fifo_data", &info->fifo_data_irq,
+ &info->ignore_fifo_data_irq);
+ if (ret < 0)
+ return ret;
+ }
- if (IS_ENABLED(CONFIG_THERMAL_OF)) {
- ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
- if (ret < 0) {
- dev_err(&pdev->dev,
- "failed to register iio map array\n");
- goto err;
- }
+ ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to register iio map array\n");
+ return ret;
}
+ return 0;
+}
+
+static int sun4i_gpadc_probe(struct platform_device *pdev)
+{
+ struct sun4i_gpadc_iio *info;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ info = iio_priv(indio_dev);
+ platform_set_drvdata(pdev, indio_dev);
+
+ mutex_init(&info->mutex);
+ info->indio_dev = indio_dev;
+ init_completion(&info->completion);
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->dev.of_node = pdev->dev.of_node;
+ indio_dev->info = &sun4i_gpadc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ if (pdev->dev.of_node)
+ ret = sun4i_gpadc_probe_dt(pdev, indio_dev);
+ else
+ ret = sun4i_gpadc_probe_mfd(pdev, indio_dev);
+
+ if (ret)
+ return ret;
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ SUN4I_GPADC_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
ret = devm_iio_device_register(&pdev->dev, indio_dev);
if (ret < 0) {
dev_err(&pdev->dev, "could not register the device\n");
- goto err_map;
+ goto err;
}
return 0;
-err_map:
- if (IS_ENABLED(CONFIG_THERMAL_OF))
- iio_map_array_unregister(indio_dev);
-
err:
+ if (!info->use_dt && IS_ENABLED(CONFIG_THERMAL_OF))
+ iio_map_array_unregister(indio_dev);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -580,10 +682,11 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
static int sun4i_gpadc_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- if (IS_ENABLED(CONFIG_THERMAL_OF))
+ if (!info->use_dt && IS_ENABLED(CONFIG_THERMAL_OF))
iio_map_array_unregister(indio_dev);
return 0;
@@ -599,6 +702,7 @@ static const struct platform_device_id sun4i_gpadc_id[] = {
static struct platform_driver sun4i_gpadc_driver = {
.driver = {
.name = "sun4i-gpadc-iio",
+ .of_match_table = sun4i_gpadc_of_id,
.pm = &sun4i_gpadc_pm_ops,
},
.id_table = sun4i_gpadc_id,
diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
index 509e736..139872c 100644
--- a/include/linux/mfd/sun4i-gpadc.h
+++ b/include/linux/mfd/sun4i-gpadc.h
@@ -38,6 +38,10 @@
#define SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(x) (GENMASK(3, 0) & BIT(x))
#define SUN6I_GPADC_CTRL1_ADC_CHAN_MASK GENMASK(3, 0)
+/* TP_CTRL1 bits for sun8i SoCs */
+#define SUN8I_GPADC_CTRL1_CHOP_TEMP_EN BIT(8)
+#define SUN8I_GPADC_CTRL1_GPADC_CALI_EN BIT(7)
+
#define SUN4I_GPADC_CTRL2 0x08
#define SUN4I_GPADC_CTRL2_TP_SENSITIVE_ADJUST(x) ((GENMASK(3, 0) & (x)) << 28)
--
2.9.3
^ permalink raw reply related
* [PATCH 2/7] Documentation: DT: bindings: mfd: add documentation for Allwinner SoCs' GPADC MFD driver
From: Quentin Schulz @ 2016-12-20 10:27 UTC (permalink / raw)
To: jic23-DgEjT+Ai2ygdnm+yROfE0A, knaack.h-Mmb7MZpHnFY,
lars-Qo5EllUWu/uELgA04lAiVw, pmeerw-jW+XmwGofnusTnJN9+BGXg,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
lee.jones-QSEj5FYQhm4dnm+yROfE0A, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
stefan.mavrodiev-Re5JQEeQqe8AvxtiuMwx3w
Cc: Quentin Schulz, linux-iio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
In-Reply-To: <20161220102709.9504-1-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
The Allwinner SoCs all have an ADC that can also act as a thermal sensor
and sometimes as a touchscreen controller. If there is a touchscreen
controller, the first four channels can be used either for the ADC or
the touchscreen and the fifth channel is used for the thermal sensor.
If there is not a touchscreen controller, the one and only channel is
used for the thermal sensor.
The Allwinner SoCs already have an existing DT binding for the
touchscreen controller and thermal sensor for the sun4i-ts input driver
which does let the user use the ADC. To keep backward compatibility,
this MFD driver re-uses the same bindings as the sun4i-ts input driver
and will probe the required drivers to make the ADC and thermal sensor
work.
This patch adds the binding documentation for the MFD driver of the
Allwinner SoCs' GPADC.
Signed-off-by: Quentin Schulz <quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
.../devicetree/bindings/mfd/sun4i-gpadc.txt | 47 ++++++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
new file mode 100644
index 0000000..bc4b4f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
@@ -0,0 +1,47 @@
+Allwinner SoCs' GPADC Device Tree bindings
+------------------------------------------
+
+The Allwinner SoCs all have an ADC that can also act as a thermal sensor and
+sometimes as a touchscreen controller. If there is a touchscreen controller, the
+first four channels can be used either for the ADC or the touchscreen and the
+fifth channel is used for the thermal sensor.
+If there is not a touchscreen controller, the one and only channel is used for
+the thermal sensor.
+
+Currently, the touchscreen controller does not have a driver using this ADC
+driver. The touchscreen controller is currently driven only by
+input/touchscreen/sun4i-ts.c which is absolutely incompatible with this driver.
+
+The Allwinner A10, A13 and A31 SoCs already have a DT binding for the
+aforementioned input driver, thus this MFD driver matches the existing DT
+binding (mfd/sun4i-gpadc.c).
+To keep DT binding compatibility, the MFD replaces the sun4i-ts input driver and
+probes required drivers (IIO GPADC driver (iio/adc/sun4i-gpadc-iio.c),
+iio-hwmon and soon the touchscreen driver) without the need for a DT binding for
+each driver.
+
+Required properties:
+ - compatible: one of:
+ - "allwinner,sun4i-a10-ts",
+ - "allwinner,sun5i-a13-ts",
+ - "allwinner,sun6i-a31-ts"
+ - #thermal-sensor-cells = <0>;
+
+Example:
+
+thermal-zones {
+ cpu_thermal {
+ thermal-sensors = <&rtp>;
+ [...]
+ };
+};
+
+soc@01c00000 {
+ [...]
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun6i-a31-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <0>;
+ };
+};
--
2.9.3
^ permalink raw reply related
* [PATCH 1/7] Documentation: DT: bindings: iio: adc: add documentation for Allwinner SoCs' GPADC driver
From: Quentin Schulz @ 2016-12-20 10:27 UTC (permalink / raw)
To: jic23-DgEjT+Ai2ygdnm+yROfE0A, knaack.h-Mmb7MZpHnFY,
lars-Qo5EllUWu/uELgA04lAiVw, pmeerw-jW+XmwGofnusTnJN9+BGXg,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
lee.jones-QSEj5FYQhm4dnm+yROfE0A, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
stefan.mavrodiev-Re5JQEeQqe8AvxtiuMwx3w
Cc: Quentin Schulz, linux-iio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
In-Reply-To: <20161220102709.9504-1-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
The Allwinner SoCs all have an ADC that can also act as a thermal sensor
and sometimes as a touchscreen controller. If there is a touchscreen
controller, the first four channels can be used either for the ADC or
the touchscreen and the fifth channel is used for the thermal sensor.
If there is not a touchscreen controller, the one and only channel is
used for the thermal sensor.
This patch adds the documentation for the driver of the Allwinner SoCs'
GPADC.
Signed-off-by: Quentin Schulz <quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
.../bindings/iio/adc/sun4i-gpadc-iio.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/sun4i-gpadc-iio.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc-iio.txt b/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc-iio.txt
new file mode 100644
index 0000000..aab768d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc-iio.txt
@@ -0,0 +1,57 @@
+Allwinner SoCs' GPADC Device Tree bindings
+------------------------------------------
+
+The Allwinner SoCs all have an ADC that can also act as a thermal sensor and
+sometimes as a touchscreen controller. If there is a touchscreen controller, the
+first four channels can be used either for the ADC or the touchscreen and the
+fifth channel is used for the thermal sensor.
+If there is not a touchscreen controller, the one and only channel is used for
+the thermal sensor.
+
+Currently, the touchscreen controller does not have a driver using this ADC
+driver. The touchscreen controller is currently driven only by
+input/touchscreen/sun4i-ts.c which is absolutely incompatible with this driver.
+
+The Allwinner A10, A13 and A31 SoCs already have a DT binding for the
+aforementioned input driver, thus an MFD driver matches the existing DT binding
+(mfd/sun4i-gpadc.c) and replaces the input driver. No DT binding is required for
+these SoCs' ADC, everything is handled by the MFD which is matching the existing
+DT binding for input/touchscreen/sun4i-ts.c.
+
+The Allwinner A33 GPADC only have a thermal sensor and have a proper DT binding
+for this driver unlike the previously mentioned SoCs.
+
+Required properties:
+ - compatible: "allwinner,sun8i-a33-gpadc-iio"
+
+Optional properties:
+(for use with thermal framework for CPU thermal throttling for example, and/or
+ IIO consumers)
+ - #thermal-sensor-cells = <0>; (see
+Documentation/devicetree/bindings/thermal/thermal.txt)
+ - #io-channel-cells = <0>; (see
+Documentation/devicetree/bindings/iio/iio-bindings.txt)
+
+Example:
+
+thermal-zones {
+ cpu_thermal {
+ thermal-sensors = <&rtp>;
+ [...]
+ };
+};
+
+soc@01c00000 {
+ [...]
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun8i-a33-gpadc-iio";
+ reg = <0x01c25000 0x100>;
+ #thermal-sensor-cells = <0>;
+ #io-channel-cells = <0>;
+ };
+}
+
+iio_hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&rtp>;
+};
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 0/7] add CPU thermal throttling to Allwinner A33 SoC
From: Quentin Schulz @ 2016-12-20 10:27 UTC (permalink / raw)
To: jic23-DgEjT+Ai2ygdnm+yROfE0A, knaack.h-Mmb7MZpHnFY,
lars-Qo5EllUWu/uELgA04lAiVw, pmeerw-jW+XmwGofnusTnJN9+BGXg,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
lee.jones-QSEj5FYQhm4dnm+yROfE0A, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
stefan.mavrodiev-Re5JQEeQqe8AvxtiuMwx3w
Cc: Quentin Schulz, linux-iio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
The Allwinner SoCs all have an ADC that can also act as a touchscreen
controller and a thermal sensor. The first four channels can be used
either for the ADC or the touchscreen and the fifth channel is used for
the thermal sensor. We currently have a driver for the two latter
functions in drivers/input/touchscreen/sun4i-ts.c but we don't have
access to the ADC feature at all. It is meant to replace the current
driver by using MFD and subdrivers.
The Allwinner A33 only has a thermal sensor present in the GPADC. In
addition, there is not an existing DT binding for the GPADC. Thus, we do
not need the sun4i-gpadc MFD driver which was made to keep DT compatibility
and probe subdrivers without the need to add DT subnodes.
This series of patch adds the CPU thermal sensor for the A33 and CPU thermal
throttling. It also adds DT binding documentation for the IIO and MFD GPADC
drivers. Finally, it adds the cpu-supply property to the CPU node needed by
the Sinlinx SinA33 and Olinuxino A33 to adapt their CPU regulator voltage
depending on the currently used OPP. The other A33 boards all have their
cpu-supply property set.
This patch *HAS NOT* been tested on the Olinuxino A33.
@Stefan (or anyone owning an Olinuxino A33), could you test this patch
series on your board, test CPUfreq and tell us if it works in a stable
manner? Thanks!
This series of patch is based on this[1] and this[2][3] series of patch.
[1] https://lkml.org/lkml/2016/12/13/298 : "[PATCH v9] add support for Allwinner
SoCs ADC"
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-December/473962.html
: "[PATCH] Allwinner A33 CPU frequency scaling support" without PATCH 4/6
[3] https://lkml.org/lkml/2016/12/19/72 : "[PATCH v2] ARM: dts: sun8i: add
opp-v2 table for A33"
Quentin Schulz (7):
Documentation: DT: bindings: iio: adc: add documentation for Allwinner
SoCs' GPADC driver
Documentation: DT: bindings: mfd: add documentation for Allwinner
SoCs' GPADC MFD driver
iio: adc: sun4i-gpadc-iio: add support for A33 thermal sensor
ARM: dts: sun8i-a33-sinlinx-sina33: add cpu-supply
ARM: dts: sun8i-a33-olinuxino: add cpu-supply
ARM: dtsi: sun8i-a33: add A33 thermal sensor
ARM: dtsi: sun8i-a33: add CPU thermal throttling
.../bindings/iio/adc/sun4i-gpadc-iio.txt | 57 ++++++
.../devicetree/bindings/mfd/sun4i-gpadc.txt | 47 +++++
arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 4 +
arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 4 +
arch/arm/boot/dts/sun8i-a33.dtsi | 59 ++++++
drivers/iio/adc/Kconfig | 21 ++-
drivers/iio/adc/sun4i-gpadc-iio.c | 204 ++++++++++++++++-----
include/linux/mfd/sun4i-gpadc.h | 4 +
8 files changed, 343 insertions(+), 57 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/sun4i-gpadc-iio.txt
create mode 100644 Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH] ARM: dts: sun6i: Mele I7: Enable internal audio codec
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w @ 2016-12-20 10:23 UTC (permalink / raw)
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Marcus Cooper
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The Mele I7 has an audio jack for the SoC's internal codec.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun6i-a31-i7.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index f3468a14596e..a2193309a199 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -71,6 +71,12 @@
};
};
+&codec {
+ allwinner,audio-routing =
+ "Headphone", "HP";
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
--
2.11.0
^ permalink raw reply related
* [PATCH] ARM: dts: sun4i: A1000: add axp209 regulator nodes
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w @ 2016-12-20 10:22 UTC (permalink / raw)
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Marcus Cooper
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This patch adds the regulator nodes for the axp209 by including
the axp209 dtsi.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun4i-a10-a1000.dts | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 68c6bdb2cf7c..e7394d701856 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -196,6 +196,40 @@
};
};
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-wifi";
+};
+
®_usb1_vbus {
status = "okay";
};
--
2.11.0
^ permalink raw reply related
* Re: [PATCH v2 0/3] Add support for the ethernet switch on the ESPRESSObin
From: Romain Perier @ 2016-12-20 8:53 UTC (permalink / raw)
To: Andrew Lunn, Vivien Didelot, Florian Fainelli, Jason Cooper,
Sebastian Hesselbarth, Gregory Clement
Cc: netdev-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA,
Rob Herring, Ian Campbell, Pawel Moll, Mark Rutland, Kumar Gala,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Thomas Petazzoni, Nadav Haklai
In-Reply-To: <20161220085138.3998-1-romain.perier-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Hi,
Le 20/12/2016 à 09:51, Romain Perier a écrit :
> This set of patches adds support for the Marvell ethernet switch 88E6341.
> It also add the devicetree definition of this switch to the DT board.
>
> Romain Perier (3):
> net: dsa: mv88e6xxx: Don't forbid MDIO I/Os for PHY addr >=
> num_of_ports
> net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341/88E6141
> arm64: dts: marvell: Add ethernet switch definition for the
> ESPRESSObin
>
> .../boot/dts/marvell/armada-3720-espressobin.dts | 67 ++++++++++++++++++++++
> drivers/net/dsa/mv88e6xxx/chip.c | 48 ++++++++++++++--
> drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 4 +-
> 3 files changed, 112 insertions(+), 7 deletions(-)
>
Oh and I rebased the whole series onto net-next.
Romain
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v2 3/3] arm64: dts: marvell: Add ethernet switch definition for the ESPRESSObin
From: Romain Perier @ 2016-12-20 8:51 UTC (permalink / raw)
To: Andrew Lunn, Vivien Didelot, Florian Fainelli, Jason Cooper,
Sebastian Hesselbarth, Gregory Clement
Cc: netdev, devicetree, Rob Herring, Ian Campbell, Pawel Moll,
Mark Rutland, Kumar Gala, linux-arm-kernel, Thomas Petazzoni,
Nadav Haklai, Romain Perier
In-Reply-To: <20161220085138.3998-1-romain.perier@free-electrons.com>
This defines and enables the Marvell ethernet switch MVE886341 on the
Marvell ESPRESSObin board.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
---
Changes in v2:
- EXPRESSObin -> ESPRESSObin
- phy nodes definition must contain the internal bus address after the @
.../boot/dts/marvell/armada-3720-espressobin.dts | 67 ++++++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index 83178d9..9582661 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -80,3 +80,70 @@
&usb3 {
status = "okay";
};
+
+&mdio {
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <ð0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "wan";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan0";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ phy-handle = <&switch0phy2>;
+ };
+
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+ };
+ };
+};
+
+ð0 {
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v2 2/3] net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341/88E6141
From: Romain Perier @ 2016-12-20 8:51 UTC (permalink / raw)
To: Andrew Lunn, Vivien Didelot, Florian Fainelli, Jason Cooper,
Sebastian Hesselbarth, Gregory Clement
Cc: netdev, devicetree, Rob Herring, Ian Campbell, Pawel Moll,
Mark Rutland, Kumar Gala, linux-arm-kernel, Thomas Petazzoni,
Nadav Haklai, Romain Perier
In-Reply-To: <20161220085138.3998-1-romain.perier@free-electrons.com>
The Marvell 88E6341 device is single-chip, 6-port ethernet switch with
four integrated 10/100/1000Mbps ethernet transceivers and one high speed
SerDes interfaces. It is compatible with switches of family 88E6352.
This commit adds basic support for this switch by describing its
capabilities to the driver.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
---
Changes in v2:
- Add a dedicated data structure for the operations of the 88E6341
- Re-ordered PORT_SWITCH_ID_PROD_NUM_6341 in alphabetic order with other
macros
drivers/net/dsa/mv88e6xxx/chip.c | 42 +++++++++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 4 +++-
2 files changed, 45 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 76d944e..5e97dc4 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3625,6 +3625,34 @@ static const struct mv88e6xxx_ops mv88e6321_ops = {
.reset = mv88e6352_g1_reset,
};
+static const struct mv88e6xxx_ops mv88e6341_ops = {
+ /* MV88E6XXX_FAMILY_6352 */
+ .get_eeprom = mv88e6xxx_g2_get_eeprom16,
+ .set_eeprom = mv88e6xxx_g2_set_eeprom16,
+ .set_switch_mac = mv88e6xxx_g2_set_switch_mac,
+ .phy_read = mv88e6xxx_g2_smi_phy_read,
+ .phy_write = mv88e6xxx_g2_smi_phy_write,
+ .port_set_link = mv88e6xxx_port_set_link,
+ .port_set_duplex = mv88e6xxx_port_set_duplex,
+ .port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
+ .port_set_speed = mv88e6352_port_set_speed,
+ .port_tag_remap = mv88e6095_port_tag_remap,
+ .port_set_frame_mode = mv88e6351_port_set_frame_mode,
+ .port_set_egress_unknowns = mv88e6351_port_set_egress_unknowns,
+ .port_set_ether_type = mv88e6351_port_set_ether_type,
+ .port_jumbo_config = mv88e6165_port_jumbo_config,
+ .port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting,
+ .port_pause_config = mv88e6097_port_pause_config,
+ .stats_snapshot = mv88e6320_g1_stats_snapshot,
+ .stats_get_sset_count = mv88e6095_stats_get_sset_count,
+ .stats_get_strings = mv88e6095_stats_get_strings,
+ .stats_get_stats = mv88e6095_stats_get_stats,
+ .g1_set_cpu_port = mv88e6095_g1_set_cpu_port,
+ .g1_set_egress_port = mv88e6095_g1_set_egress_port,
+ .mgmt_rsvd2cpu = mv88e6095_g2_mgmt_rsvd2cpu,
+ .reset = mv88e6352_g1_reset,
+};
+
static const struct mv88e6xxx_ops mv88e6350_ops = {
/* MV88E6XXX_FAMILY_6351 */
.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
@@ -4086,6 +4114,20 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
.ops = &mv88e6321_ops,
},
+ [MV88E6341] = {
+ .prod_num = PORT_SWITCH_ID_PROD_NUM_6341,
+ .family = MV88E6XXX_FAMILY_6352,
+ .name = "Marvell 88E6341",
+ .num_databases = 4096,
+ .num_ports = 6,
+ .port_base_addr = 0x10,
+ .global1_addr = 0x1b,
+ .age_time_coeff = 15000,
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
+ .flags = MV88E6XXX_FLAGS_FAMILY_6352,
+ .ops = &mv88e6341_ops,
+ },
+
[MV88E6350] = {
.prod_num = PORT_SWITCH_ID_PROD_NUM_6350,
.family = MV88E6XXX_FAMILY_6351,
diff --git a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
index af54bae..cb55fdb 100644
--- a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
@@ -100,6 +100,7 @@
#define PORT_SWITCH_ID_PROD_NUM_6240 0x240
#define PORT_SWITCH_ID_PROD_NUM_6290 0x290
#define PORT_SWITCH_ID_PROD_NUM_6321 0x310
+#define PORT_SWITCH_ID_PROD_NUM_6341 0x340
#define PORT_SWITCH_ID_PROD_NUM_6352 0x352
#define PORT_SWITCH_ID_PROD_NUM_6350 0x371
#define PORT_SWITCH_ID_PROD_NUM_6351 0x375
@@ -432,6 +433,7 @@ enum mv88e6xxx_model {
MV88E6290,
MV88E6320,
MV88E6321,
+ MV88E6341,
MV88E6350,
MV88E6351,
MV88E6352,
@@ -448,7 +450,7 @@ enum mv88e6xxx_family {
MV88E6XXX_FAMILY_6185, /* 6108 6121 6122 6131 6152 6155 6182 6185 */
MV88E6XXX_FAMILY_6320, /* 6320 6321 */
MV88E6XXX_FAMILY_6351, /* 6171 6175 6350 6351 */
- MV88E6XXX_FAMILY_6352, /* 6172 6176 6240 6352 */
+ MV88E6XXX_FAMILY_6352, /* 6172 6176 6240 6341 6352 */
MV88E6XXX_FAMILY_6390, /* 6190 6190X 6191 6290 6390 6390X */
};
--
2.9.3
^ permalink raw reply related
* [PATCH v2 1/3] net: dsa: mv88e6xxx: Don't forbid MDIO I/Os for PHY addr >= num_of_ports
From: Romain Perier @ 2016-12-20 8:51 UTC (permalink / raw)
To: Andrew Lunn, Vivien Didelot, Florian Fainelli, Jason Cooper,
Sebastian Hesselbarth, Gregory Clement
Cc: netdev, devicetree, Rob Herring, Ian Campbell, Pawel Moll,
Mark Rutland, Kumar Gala, linux-arm-kernel, Thomas Petazzoni,
Nadav Haklai, Romain Perier
In-Reply-To: <20161220085138.3998-1-romain.perier@free-electrons.com>
Some Marvell ethernet switches have internal ethernet transceivers with
hardcoded phy addresses. These addresses can be greater than the number
of ports or its value might be different than the associated port number.
This is for example the case for MV88E6341 that has 6 ports and internal
Port 1 to Port4 PHYs mapped at SMI addresses from 0x11 to 0x14.
This commits fixes the issue by removing the condition in MDIO callbacks.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v2:
- Added tag "Reviewed-by" by Andrew
- Fixed typo in the commit log
drivers/net/dsa/mv88e6xxx/chip.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index b5f0e1e..76d944e 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2881,9 +2881,6 @@ static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
u16 val;
int err;
- if (phy >= mv88e6xxx_num_ports(chip))
- return 0xffff;
-
mutex_lock(&chip->reg_lock);
err = mv88e6xxx_phy_read(chip, phy, reg, &val);
mutex_unlock(&chip->reg_lock);
@@ -2896,9 +2893,6 @@ static int mv88e6xxx_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val)
struct mv88e6xxx_chip *chip = bus->priv;
int err;
- if (phy >= mv88e6xxx_num_ports(chip))
- return 0xffff;
-
mutex_lock(&chip->reg_lock);
err = mv88e6xxx_phy_write(chip, phy, reg, val);
mutex_unlock(&chip->reg_lock);
--
2.9.3
^ permalink raw reply related
* [PATCH v2 0/3] Add support for the ethernet switch on the ESPRESSObin
From: Romain Perier @ 2016-12-20 8:51 UTC (permalink / raw)
To: Andrew Lunn, Vivien Didelot, Florian Fainelli, Jason Cooper,
Sebastian Hesselbarth, Gregory Clement
Cc: netdev-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA,
Rob Herring, Ian Campbell, Pawel Moll, Mark Rutland, Kumar Gala,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Thomas Petazzoni, Nadav Haklai, Romain Perier
This set of patches adds support for the Marvell ethernet switch 88E6341.
It also add the devicetree definition of this switch to the DT board.
Romain Perier (3):
net: dsa: mv88e6xxx: Don't forbid MDIO I/Os for PHY addr >=
num_of_ports
net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341/88E6141
arm64: dts: marvell: Add ethernet switch definition for the
ESPRESSObin
.../boot/dts/marvell/armada-3720-espressobin.dts | 67 ++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/chip.c | 48 ++++++++++++++--
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 4 +-
3 files changed, 112 insertions(+), 7 deletions(-)
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v4 1/5] pinctrl: aspeed: dt: Fix compatibles for the System Control Unit
From: Joel Stanley @ 2016-12-20 7:56 UTC (permalink / raw)
To: Andrew Jeffery
Cc: Linus Walleij, Rob Herring, Mark Rutland, Lee Jones, linux-gpio,
devicetree, linux-kernel
In-Reply-To: <20161220073551.28522-2-andrew@aj.id.au>
On Tue, Dec 20, 2016 at 6:05 PM, Andrew Jeffery <andrew@aj.id.au> wrote:
> Reference the SoC-specific compatible string in the examples as
> required.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
> ---
> Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
^ permalink raw reply
* [PATCH v4 5/5] pinctrl: aspeed: Fix kerneldoc return descriptions
From: Andrew Jeffery @ 2016-12-20 7:35 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, linux-gpio, devicetree, linux-kernel
In-Reply-To: <20161220073551.28522-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 782c5c97f853..76f62bd45f02 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -97,7 +97,7 @@ static inline void aspeed_sig_desc_print_val(
* @enabled: True to query the enabled state, false to query disabled state
* @regmap: The IP block's regmap instance
*
- * @return 1 if the descriptor's bitfield is configured to the state
+ * Return: 1 if the descriptor's bitfield is configured to the state
* selected by @enabled, 0 if not, and less than zero if an unrecoverable
* failure occurred
*
@@ -134,7 +134,7 @@ static int aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
* @enabled: True to query the enabled state, false to query disabled state
* @maps: The list of regmap instances
*
- * @return 1 if the expression composed by @enabled evaluates true, 0 if not,
+ * Return: 1 if the expression composed by @enabled evaluates true, 0 if not,
* and less than zero if an unrecoverable failure occurred.
*
* A mux function is enabled or disabled if the function's signal expression
@@ -175,7 +175,7 @@ static int aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
* expression, false to disable the function's signal
* @maps: The list of regmap instances for pinmux register access.
*
- * @return 0 if the expression is configured as requested and a negative error
+ * Return: 0 if the expression is configured as requested and a negative error
* code otherwise
*/
static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
@@ -256,7 +256,7 @@ static int aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
* @exprs: The list of signal expressions (from a priority level on a pin)
* @maps: The list of regmap instances for pinmux register access.
*
- * @return 0 if all expressions are disabled, otherwise a negative error code
+ * Return: 0 if all expressions are disabled, otherwise a negative error code
*/
static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
struct regmap * const *maps)
@@ -281,8 +281,8 @@ static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
* @exprs: List of signal expressions (haystack)
* @name: The name of the requested function (needle)
*
- * @return A pointer to the signal expression whose function tag matches the
- * provided name, otherwise NULL.
+ * Return: A pointer to the signal expression whose function tag matches the
+ * provided name, otherwise NULL.
*
*/
static const struct aspeed_sig_expr *aspeed_find_expr_by_name(
--
2.9.3
^ permalink raw reply related
* [PATCH v4 4/5] pinctrl: aspeed-g5: Add mux configuration for all pins
From: Andrew Jeffery @ 2016-12-20 7:35 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, linux-gpio, devicetree, linux-kernel
In-Reply-To: <20161220073551.28522-1-andrew@aj.id.au>
The patch introducing the g5 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms and the AST2500 evaluation board.
Now, update the bindings document to reflect the complete functionality
and implement the necessary pin configuration tables in the driver.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 17 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 1476 +++++++++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 1 +
3 files changed, 1487 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index a645d0be3347..b98e6f030da8 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -59,10 +59,19 @@ VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
-GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
-I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
-TIMER7 TIMER8 VGABIOSROM
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4
+GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6
+I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME
+LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1
+NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2
+NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4
+PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10
+SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9
+SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0
+SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2
+TXD3 TXD4 UART6 USBCKI VGABIOSROM VGAHS VGAVS VPI24 VPO WDTRST1 WDTRST2
Examples
========
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index c5c9a1b6fa1c..43221a3c7e23 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -25,14 +25,28 @@
#include "../pinctrl-utils.h"
#include "pinctrl-aspeed.h"
-#define ASPEED_G5_NR_PINS 228
+#define ASPEED_G5_NR_PINS 232
#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+/* LHCR0 is offset from the end of the H8S/2168-compatible registers */
+#define LHCR0 0x20
+#define GFX064 0x64
+
#define B14 0
SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+#define D14 1
+SSSF_PIN_DECL(D14, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
+#define D13 2
+SIG_EXPR_LIST_DECL_SINGLE(SPI1CS1, SPI1CS1, SIG_DESC_SET(SCU80, 15));
+SIG_EXPR_LIST_DECL_SINGLE(TIMER3, TIMER3, SIG_DESC_SET(SCU80, 2));
+MS_PIN_DECL(D13, GPIOA2, SPI1CS1, TIMER3);
+FUNC_GROUP_DECL(SPI1CS1, D13);
+FUNC_GROUP_DECL(TIMER3, D13);
+
#define E13 3
SSSF_PIN_DECL(E13, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
@@ -72,6 +86,32 @@ FUNC_GROUP_DECL(TIMER8, B13);
FUNC_GROUP_DECL(MDIO2, C13, B13);
+#define K19 8
+GPIO_PIN_DECL(K19, GPIOB0);
+
+#define L19 9
+GPIO_PIN_DECL(L19, GPIOB1);
+
+#define L18 10
+GPIO_PIN_DECL(L18, GPIOB2);
+
+#define K18 11
+GPIO_PIN_DECL(K18, GPIOB3);
+
+#define J20 12
+SSSF_PIN_DECL(J20, GPIOB4, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+
+#define H21 13
+#define H21_DESC SIG_DESC_SET(SCU80, 13)
+SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCSMI, LPCSMI, H21_DESC);
+MS_PIN_DECL(H21, GPIOB5, LPCPD, LPCSMI);
+FUNC_GROUP_DECL(LPCPD, H21);
+FUNC_GROUP_DECL(LPCSMI, H21);
+
+#define H22 14
+SSSF_PIN_DECL(H22, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+
#define H20 15
GPIO_PIN_DECL(H20, GPIOB7);
@@ -168,7 +208,44 @@ MS_PIN_DECL(D20, GPIOD3, SD2DAT1, GPID2OUT);
FUNC_GROUP_DECL(GPID2, F20, D20);
-#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 21)
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define D21 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(D21, GPIOD4, SD2DAT2, GPID4IN);
+
+#define E20 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(E20, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, D21, E20);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define G18 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(G18, GPIOD6, SD2CD, GPID6IN);
+
+#define C21 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(C21, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, G18, C21);
+FUNC_GROUP_DECL(SD2, F19, E21, F20, D20, D21, E20, G18, C21);
+
+#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define B20 32
@@ -177,6 +254,7 @@ SIG_EXPR_DECL(GPIE0IN, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0IN, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0IN, GPIE0, GPIE);
MS_PIN_DECL(B20, GPIOE0, NCTS3, GPIE0IN);
+FUNC_GROUP_DECL(NCTS3, B20);
#define C20 33
SIG_EXPR_LIST_DECL_SINGLE(NDCD3, NDCD3, SIG_DESC_SET(SCU80, 17));
@@ -184,9 +262,227 @@ SIG_EXPR_DECL(GPIE0OUT, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0OUT, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0OUT, GPIE0, GPIE);
MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
+FUNC_GROUP_DECL(NDCD3, C20);
FUNC_GROUP_DECL(GPIE0, B20, C20);
+#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
+
+#define F18 34
+SIG_EXPR_LIST_DECL_SINGLE(NDSR3, NDSR3, SIG_DESC_SET(SCU80, 18));
+SIG_EXPR_DECL(GPIE2IN, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2IN, GPIE2, GPIE);
+MS_PIN_DECL(F18, GPIOE2, NDSR3, GPIE2IN);
+FUNC_GROUP_DECL(NDSR3, F18);
+
+
+#define F17 35
+SIG_EXPR_LIST_DECL_SINGLE(NRI3, NRI3, SIG_DESC_SET(SCU80, 19));
+SIG_EXPR_DECL(GPIE2OUT, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2OUT, GPIE2, GPIE);
+MS_PIN_DECL(F17, GPIOE3, NRI3, GPIE2OUT);
+FUNC_GROUP_DECL(NRI3, F17);
+
+FUNC_GROUP_DECL(GPIE2, F18, F17);
+
+#define GPIE4_DESC SIG_DESC_SET(SCU8C, 14)
+
+#define E18 36
+SIG_EXPR_LIST_DECL_SINGLE(NDTR3, NDTR3, SIG_DESC_SET(SCU80, 20));
+SIG_EXPR_DECL(GPIE4IN, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4IN, GPIE4, GPIE);
+MS_PIN_DECL(E18, GPIOE4, NDTR3, GPIE4IN);
+FUNC_GROUP_DECL(NDTR3, E18);
+
+#define D19 37
+SIG_EXPR_LIST_DECL_SINGLE(NRTS3, NRTS3, SIG_DESC_SET(SCU80, 21));
+SIG_EXPR_DECL(GPIE4OUT, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4OUT, GPIE4, GPIE);
+MS_PIN_DECL(D19, GPIOE5, NRTS3, GPIE4OUT);
+FUNC_GROUP_DECL(NRTS3, D19);
+
+FUNC_GROUP_DECL(GPIE4, E18, D19);
+
+#define GPIE6_DESC SIG_DESC_SET(SCU8C, 15)
+
+#define A20 38
+SIG_EXPR_LIST_DECL_SINGLE(TXD3, TXD3, SIG_DESC_SET(SCU80, 22));
+SIG_EXPR_DECL(GPIE6IN, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6IN, GPIE6, GPIE);
+MS_PIN_DECL(A20, GPIOE6, TXD3, GPIE6IN);
+FUNC_GROUP_DECL(TXD3, A20);
+
+#define B19 39
+SIG_EXPR_LIST_DECL_SINGLE(RXD3, RXD3, SIG_DESC_SET(SCU80, 23));
+SIG_EXPR_DECL(GPIE6OUT, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6OUT, GPIE6, GPIE);
+MS_PIN_DECL(B19, GPIOE7, RXD3, GPIE6OUT);
+FUNC_GROUP_DECL(RXD3, B19);
+
+FUNC_GROUP_DECL(GPIE6, A20, B19);
+
+#define LPCHC_DESC SIG_DESC_IP_SET(ASPEED_IP_LPC, LHCR0, 0)
+#define LPCPLUS_DESC SIG_DESC_SET(SCU90, 30)
+
+#define J19 40
+SIG_EXPR_DECL(LHAD0, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD0, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD0, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS4, NCTS4, SIG_DESC_SET(SCU80, 24));
+MS_PIN_DECL(J19, GPIOF0, LHAD0, NCTS4);
+FUNC_GROUP_DECL(NCTS4, J19);
+
+#define J18 41
+SIG_EXPR_DECL(LHAD1, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD1, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD1, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD4, NDCD4, SIG_DESC_SET(SCU80, 25));
+MS_PIN_DECL(J18, GPIOF1, LHAD1, NDCD4);
+FUNC_GROUP_DECL(NDCD4, J18);
+
+#define B22 42
+SIG_EXPR_DECL(LHAD2, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD2, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD2, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+MS_PIN_DECL(B22, GPIOF2, LHAD2, NDSR4);
+FUNC_GROUP_DECL(NDSR4, B22);
+
+#define B21 43
+SIG_EXPR_DECL(LHAD3, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD3, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD3, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
+MS_PIN_DECL(B21, GPIOF3, LHAD3, NRI4);
+FUNC_GROUP_DECL(NRI4, B21);
+
+#define A21 44
+SIG_EXPR_DECL(LHCLK, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHCLK, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHCLK, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR4, NDTR4, SIG_DESC_SET(SCU80, 28));
+MS_PIN_DECL(A21, GPIOF4, LHCLK, NDTR4);
+FUNC_GROUP_DECL(NDTR4, A21);
+
+#define H19 45
+SIG_EXPR_DECL(LHFRAME, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHFRAME, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHFRAME, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS4, NRTS4, SIG_DESC_SET(SCU80, 29));
+MS_PIN_DECL(H19, GPIOF5, LHFRAME, NRTS4);
+FUNC_GROUP_DECL(NRTS4, H19);
+
+#define G17 46
+SIG_EXPR_LIST_DECL_SINGLE(LHSIRQ, LPCHC, LPCHC_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD4, TXD4, SIG_DESC_SET(SCU80, 30));
+MS_PIN_DECL(G17, GPIOF6, LHSIRQ, TXD4);
+FUNC_GROUP_DECL(TXD4, G17);
+
+#define H18 47
+SIG_EXPR_DECL(LHRST, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHRST, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHRST, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(RXD4, RXD4, SIG_DESC_SET(SCU80, 31));
+MS_PIN_DECL(H18, GPIOF7, LHRST, RXD4);
+FUNC_GROUP_DECL(RXD4, H18);
+
+FUNC_GROUP_DECL(LPCHC, J19, J18, B22, B21, A21, H19, G17, H18);
+FUNC_GROUP_DECL(LPCPLUS, J19, J18, B22, B21, A21, H19, H18);
+
+#define A19 48
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1CK, SGPS1, COND1, SIG_DESC_SET(SCU84, 0));
+SS_PIN_DECL(A19, GPIOG0, SGPS1CK);
+
+#define E19 49
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1LD, SGPS1, COND1, SIG_DESC_SET(SCU84, 1));
+SS_PIN_DECL(E19, GPIOG1, SGPS1LD);
+
+#define C19 50
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I0, SGPS1, COND1, SIG_DESC_SET(SCU84, 2));
+SS_PIN_DECL(C19, GPIOG2, SGPS1I0);
+
+#define E16 51
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I1, SGPS1, COND1, SIG_DESC_SET(SCU84, 3));
+SS_PIN_DECL(E16, GPIOG3, SGPS1I1);
+
+FUNC_GROUP_DECL(SGPS1, A19, E19, C19, E16);
+
+#define SGPS2_DESC SIG_DESC_SET(SCU94, 12)
+
+#define E17 52
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2CK, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT1, SALT1, COND1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(E17, GPIOG4, SGPS2CK, SALT1);
+FUNC_GROUP_DECL(SALT1, E17);
+
+#define D16 53
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2LD, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT2, SALT2, COND1, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(D16, GPIOG5, SGPS2LD, SALT2);
+FUNC_GROUP_DECL(SALT2, D16);
+
+#define D15 54
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I0, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT3, SALT3, COND1, SIG_DESC_SET(SCU84, 6));
+MS_PIN_DECL(D15, GPIOG6, SGPS2I0, SALT3);
+FUNC_GROUP_DECL(SALT3, D15);
+
+#define E14 55
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I1, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT4, SALT4, COND1, SIG_DESC_SET(SCU84, 7));
+MS_PIN_DECL(E14, GPIOG7, SGPS2I1, SALT4);
+FUNC_GROUP_DECL(SALT4, E14);
+
+FUNC_GROUP_DECL(SGPS2, E17, D16, D15, E14);
+
+#define UART6_DESC SIG_DESC_SET(SCU90, 7)
+
+#define A18 56
+SIG_EXPR_LIST_DECL_SINGLE(DASHA18, DASHA18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A18, GPIOH0, DASHA18, NCTS6);
+
+#define B18 57
+SIG_EXPR_LIST_DECL_SINGLE(DASHB18, DASHB18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B18, GPIOH1, DASHB18, NDCD6);
+
+#define D17 58
+SIG_EXPR_LIST_DECL_SINGLE(DASHD17, DASHD17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(D17, GPIOH2, DASHD17, NDSR6);
+
+#define C17 59
+SIG_EXPR_LIST_DECL_SINGLE(DASHC17, DASHC17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NRI6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(C17, GPIOH3, DASHC17, NRI6);
+
+#define A17 60
+SIG_EXPR_LIST_DECL_SINGLE(DASHA17, DASHA17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A17, GPIOH4, DASHA17, NDTR6);
+
+#define B17 61
+SIG_EXPR_LIST_DECL_SINGLE(DASHB17, DASHB17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B17, GPIOH5, DASHB17, NRTS6);
+
+#define A16 62
+SIG_EXPR_LIST_DECL_SINGLE(TXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(A16, GPIOH6, TXD6);
+
+#define D18 63
+SIG_EXPR_LIST_DECL_SINGLE(RXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(D18, GPIOH7, RXD6);
+
+FUNC_GROUP_DECL(UART6, A18, B18, D17, C17, A17, B17, A16, D18);
+
#define SPI1_DESC \
{ ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
#define SPI1DEBUG_DESC \
@@ -281,6 +577,30 @@ SS_PIN_DECL(N3, GPIOJ2, SGPMO);
SIG_EXPR_LIST_DECL_SINGLE(SGPMI, SGPM, SIG_DESC_SET(SCU84, 11));
SS_PIN_DECL(N4, GPIOJ3, SGPMI);
+#define N5 76
+SIG_EXPR_LIST_DECL_SINGLE(VGAHS, VGAHS, SIG_DESC_SET(SCU84, 12));
+SIG_EXPR_LIST_DECL_SINGLE(DASHN5, DASHN5, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(N5, GPIOJ4, VGAHS, DASHN5);
+FUNC_GROUP_DECL(VGAHS, N5);
+
+#define R4 77
+SIG_EXPR_LIST_DECL_SINGLE(VGAVS, VGAVS, SIG_DESC_SET(SCU84, 13));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR4, DASHR4, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(R4, GPIOJ5, VGAVS, DASHR4);
+FUNC_GROUP_DECL(VGAVS, R4);
+
+#define R3 78
+SIG_EXPR_LIST_DECL_SINGLE(DDCCLK, DDCCLK, SIG_DESC_SET(SCU84, 14));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR3, DASHR3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(R3, GPIOJ6, DDCCLK, DASHR3);
+FUNC_GROUP_DECL(DDCCLK, R3);
+
+#define T3 79
+SIG_EXPR_LIST_DECL_SINGLE(DDCDAT, DDCDAT, SIG_DESC_SET(SCU84, 15));
+SIG_EXPR_LIST_DECL_SINGLE(DASHT3, DASHT3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(T3, GPIOJ7, DDCDAT, DASHT3);
+FUNC_GROUP_DECL(DDCDAT, T3);
+
#define I2C5_DESC SIG_DESC_SET(SCU90, 18)
#define L3 80
@@ -329,11 +649,119 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
FUNC_GROUP_DECL(I2C8, P2, R1);
+#define T2 88
+SSSF_PIN_DECL(T2, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
+
#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
+#define VPI_24_RSVD_DESC SIG_DESC_SET(SCU90, 5)
+#define T1 89
+#define T1_DESC SIG_DESC_SET(SCU84, 17)
+SIG_EXPR_LIST_DECL_SINGLE(VPIDE, VPI24, VPI_24_RSVD_DESC, T1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD1, NDCD1, T1_DESC, COND2);
+MS_PIN_DECL(T1, GPIOL1, VPIDE, NDCD1);
+FUNC_GROUP_DECL(NDCD1, T1);
+
+#define U1 90
+#define U1_DESC SIG_DESC_SET(SCU84, 18)
+SIG_EXPR_LIST_DECL_SINGLE(DASHU1, VPI24, VPI_24_RSVD_DESC, U1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR1, NDSR1, U1_DESC);
+MS_PIN_DECL(U1, GPIOL2, DASHU1, NDSR1);
+FUNC_GROUP_DECL(NDSR1, U1);
+
+#define U2 91
+#define U2_DESC SIG_DESC_SET(SCU84, 19)
+SIG_EXPR_LIST_DECL_SINGLE(VPIHS, VPI24, VPI_24_RSVD_DESC, U2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI1, NRI1, U2_DESC, COND2);
+MS_PIN_DECL(U2, GPIOL3, VPIHS, NRI1);
+FUNC_GROUP_DECL(NRI1, U2);
+
+#define P4 92
+#define P4_DESC SIG_DESC_SET(SCU84, 20)
+SIG_EXPR_LIST_DECL_SINGLE(VPIVS, VPI24, VPI_24_RSVD_DESC, P4_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR1, NDTR1, P4_DESC, COND2);
+MS_PIN_DECL(P4, GPIOL4, VPIVS, NDTR1);
+FUNC_GROUP_DECL(NDTR1, P4);
+
+#define P3 93
+#define P3_DESC SIG_DESC_SET(SCU84, 21)
+SIG_EXPR_LIST_DECL_SINGLE(VPICLK, VPI24, VPI_24_RSVD_DESC, P3_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS1, NRTS1, P3_DESC, COND2);
+MS_PIN_DECL(P3, GPIOL5, VPICLK, NRTS1);
+FUNC_GROUP_DECL(NRTS1, P3);
+
+#define V1 94
+#define V1_DESC SIG_DESC_SET(SCU84, 22)
+SIG_EXPR_LIST_DECL_SINGLE(DASHV1, DASHV1, VPIRSVD_DESC, V1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD1, TXD1, V1_DESC, COND2);
+MS_PIN_DECL(V1, GPIOL6, DASHV1, TXD1);
+FUNC_GROUP_DECL(TXD1, V1);
+
+#define W1 95
+#define W1_DESC SIG_DESC_SET(SCU84, 23)
+SIG_EXPR_LIST_DECL_SINGLE(DASHW1, DASHW1, VPIRSVD_DESC, W1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, W1_DESC, COND2);
+MS_PIN_DECL(W1, GPIOL7, DASHW1, RXD1);
+FUNC_GROUP_DECL(RXD1, W1);
+
+#define Y1 96
+#define Y1_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB2, VPI24, VPI_24_RSVD_DESC, Y1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, Y1_DESC, COND2);
+MS_PIN_DECL(Y1, GPIOM0, VPIB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, Y1);
+
+#define AB2 97
+#define AB2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB3, VPI24, VPI_24_RSVD_DESC, AB2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, AB2_DESC, COND2);
+MS_PIN_DECL(AB2, GPIOM1, VPIB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, AB2);
+
+#define AA1 98
+#define AA1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB4, VPI24, VPI_24_RSVD_DESC, AA1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, AA1_DESC, COND2);
+MS_PIN_DECL(AA1, GPIOM2, VPIB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, AA1);
+
+#define Y2 99
+#define Y2_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB5, VPI24, VPI_24_RSVD_DESC, Y2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, Y2_DESC, COND2);
+MS_PIN_DECL(Y2, GPIOM3, VPIB5, NRI2);
+FUNC_GROUP_DECL(NRI2, Y2);
+
+#define AA2 100
+#define AA2_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB6, VPI24, VPI_24_RSVD_DESC, AA2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, AA2_DESC, COND2);
+MS_PIN_DECL(AA2, GPIOM4, VPIB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, AA2);
+
+#define P5 101
+#define P5_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB7, VPI24, VPI_24_RSVD_DESC, P5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, P5_DESC, COND2);
+MS_PIN_DECL(P5, GPIOM5, VPIB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, P5);
+
+#define R5 102
+#define R5_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB8, VPI24, VPI_24_RSVD_DESC, R5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, R5_DESC, COND2);
+MS_PIN_DECL(R5, GPIOM6, VPIB8, TXD2);
+FUNC_GROUP_DECL(TXD2, R5);
+
+#define T5 103
+#define T5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB9, VPI24, VPI_24_RSVD_DESC, T5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, T5_DESC, COND2);
+MS_PIN_DECL(T5, GPIOM7, VPIB9, RXD2);
+FUNC_GROUP_DECL(RXD2, T5);
#define V2 104
#define V2_DESC SIG_DESC_SET(SCU88, 0)
@@ -399,9 +827,88 @@ SIG_EXPR_LIST_DECL_SINGLE(PWM7, PWM7, T4_DESC, COND2);
MS_PIN_DECL(T4, GPION7, VPIG7, PWM7);
FUNC_GROUP_DECL(PWM7, T4);
+#define U5 112
+SIG_EXPR_LIST_DECL_SINGLE(VPIG8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 8),
+ COND2);
+SS_PIN_DECL(U5, GPIOO0, VPIG8);
+
+#define U4 113
+SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9),
+ COND2);
+SS_PIN_DECL(U4, GPIOO1, VPIG9);
+
+#define V5 114
+SIG_EXPR_LIST_DECL_SINGLE(DASHV5, DASHV5, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(V5, GPIOO2, DASHV5);
+
+#define AB4 115
+SIG_EXPR_LIST_DECL_SINGLE(DASHAB4, DASHAB4, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB4, GPIOO3, DASHAB4);
+
+#define AB3 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12),
+ COND2);
+SS_PIN_DECL(AB3, GPIOO4, VPIR2);
+
+#define Y4 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13),
+ COND2);
+SS_PIN_DECL(Y4, GPIOO5, VPIR3);
+
+#define AA4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14),
+ COND2);
+SS_PIN_DECL(AA4, GPIOO6, VPIR4);
+
+#define W4 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15),
+ COND2);
+SS_PIN_DECL(W4, GPIOO7, VPIR5);
+
+#define V4 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16),
+ COND2);
+SS_PIN_DECL(V4, GPIOP0, VPIR6);
+
+#define W5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17),
+ COND2);
+SS_PIN_DECL(W5, GPIOP1, VPIR7);
+
+#define AA5 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18),
+ COND2);
+SS_PIN_DECL(AA5, GPIOP2, VPIR8);
+
+#define AB5 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19),
+ COND2);
+SS_PIN_DECL(AB5, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI24, T1, U2, P4, P3, Y1, AB2, AA1, Y2, AA2, P5, R5, T5, V3,
+ U3, W3, AA3, Y3, T4, U5, U4, AB3, Y4, AA4, W4, V4, W5, AA5,
+ AB5);
+
+#define Y6 124
+SIG_EXPR_LIST_DECL_SINGLE(DASHY6, DASHY6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 20));
+SS_PIN_DECL(Y6, GPIOP4, DASHY6);
+
+#define Y5 125
+SIG_EXPR_LIST_DECL_SINGLE(DASHY5, DASHY5, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 21));
+SS_PIN_DECL(Y5, GPIOP5, DASHY5);
+
+#define W6 126
+SIG_EXPR_LIST_DECL_SINGLE(DASHW6, DASHW6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 22));
+SS_PIN_DECL(W6, GPIOP6, DASHW6);
+
#define V6 127
SIG_EXPR_LIST_DECL_SINGLE(DASHV6, DASHV6, SIG_DESC_SET(SCU90, 28),
- SIG_DESC_SET(SCU88, 23));
+ SIG_DESC_SET(SCU88, 23));
SS_PIN_DECL(V6, GPIOP7, DASHV6);
#define I2C3_DESC SIG_DESC_SET(SCU90, 16)
@@ -446,6 +953,24 @@ SSSF_PIN_DECL(B10, GPIOQ6, OSCCLK, SIG_DESC_SET(SCU2C, 1));
#define N20 135
SSSF_PIN_DECL(N20, GPIOQ7, PEWAKE, SIG_DESC_SET(SCU2C, 29));
+#define AA19 136
+SSSF_PIN_DECL(AA19, GPIOR0, FWSPICS1, SIG_DESC_SET(SCU88, 24), COND2);
+
+#define T19 137
+SSSF_PIN_DECL(T19, GPIOR1, FWSPICS2, SIG_DESC_SET(SCU88, 25), COND2);
+
+#define T17 138
+SSSF_PIN_DECL(T17, GPIOR2, SPI2CS0, SIG_DESC_SET(SCU88, 26), COND2);
+
+#define Y19 139
+SSSF_PIN_DECL(Y19, GPIOR3, SPI2CK, SIG_DESC_SET(SCU88, 27), COND2);
+
+#define W19 140
+SSSF_PIN_DECL(W19, GPIOR4, SPI2MOSI, SIG_DESC_SET(SCU88, 28), COND2);
+
+#define V19 141
+SSSF_PIN_DECL(V19, GPIOR5, SPI2MISO, SIG_DESC_SET(SCU88, 29), COND2);
+
#define D8 142
SIG_EXPR_LIST_DECL_SINGLE(MDC1, MDIO1, SIG_DESC_SET(SCU88, 30));
SS_PIN_DECL(D8, GPIOR6, MDC1);
@@ -456,6 +981,93 @@ SS_PIN_DECL(E10, GPIOR7, MDIO1);
FUNC_GROUP_DECL(MDIO1, D8, E10);
+#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define VPO_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
+#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
+#define VPOOFF2_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
+
+#define CRT_DVO_EN_DESC SIG_DESC_IP_SET(ASPEED_IP_GFX, GFX064, 7)
+
+#define V20 144
+#define V20_DESC SIG_DESC_SET(SCU8C, 0)
+SIG_EXPR_DECL(VPOB2, VPO, V20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, V20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF2, V20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO),
+ SIG_EXPR_PTR(VPOB2, VPOOFF1), SIG_EXPR_PTR(VPOB2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SPI2CS1, SPI2CS1, V20_DESC);
+MS_PIN_DECL(V20, GPIOS0, VPOB2, SPI2CS1);
+FUNC_GROUP_DECL(SPI2CS1, V20);
+
+#define U19 145
+#define U19_DESC SIG_DESC_SET(SCU8C, 1)
+SIG_EXPR_DECL(VPOB3, VPO, U19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, U19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF2, U19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO),
+ SIG_EXPR_PTR(VPOB3, VPOOFF1), SIG_EXPR_PTR(VPOB3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(BMCINT, BMCINT, U19_DESC);
+MS_PIN_DECL(U19, GPIOS1, VPOB3, BMCINT);
+FUNC_GROUP_DECL(BMCINT, U19);
+
+#define R18 146
+#define R18_DESC SIG_DESC_SET(SCU8C, 2)
+SIG_EXPR_DECL(VPOB4, VPO, R18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, R18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF2, R18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO),
+ SIG_EXPR_PTR(VPOB4, VPOOFF1), SIG_EXPR_PTR(VPOB4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT5, SALT5, R18_DESC);
+MS_PIN_DECL(R18, GPIOS2, VPOB4, SALT5);
+FUNC_GROUP_DECL(SALT5, R18);
+
+#define P18 147
+#define P18_DESC SIG_DESC_SET(SCU8C, 3)
+SIG_EXPR_DECL(VPOB5, VPO, P18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF2, P18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO),
+ SIG_EXPR_PTR(VPOB5, VPOOFF1), SIG_EXPR_PTR(VPOB5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT6, SALT6, P18_DESC);
+MS_PIN_DECL(P18, GPIOS3, VPOB5, SALT6);
+FUNC_GROUP_DECL(SALT6, P18);
+
+#define R19 148
+#define R19_DESC SIG_DESC_SET(SCU8C, 4)
+SIG_EXPR_DECL(VPOB6, VPO, R19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, R19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF2, R19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO),
+ SIG_EXPR_PTR(VPOB6, VPOOFF1), SIG_EXPR_PTR(VPOB6, VPOOFF2));
+SS_PIN_DECL(R19, GPIOS4, VPOB6);
+
+#define W20 149
+#define W20_DESC SIG_DESC_SET(SCU8C, 5)
+SIG_EXPR_DECL(VPOB7, VPO, W20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, W20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF2, W20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO),
+ SIG_EXPR_PTR(VPOB7, VPOOFF1), SIG_EXPR_PTR(VPOB7, VPOOFF2));
+SS_PIN_DECL(W20, GPIOS5, VPOB7);
+
+#define U20 150
+#define U20_DESC SIG_DESC_SET(SCU8C, 6)
+SIG_EXPR_DECL(VPOB8, VPO, U20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF1, U20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF2, U20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB8, SIG_EXPR_PTR(VPOB8, VPO),
+ SIG_EXPR_PTR(VPOB8, VPOOFF1), SIG_EXPR_PTR(VPOB8, VPOOFF2));
+SS_PIN_DECL(U20, GPIOS6, VPOB8);
+
+#define AA20 151
+#define AA20_DESC SIG_DESC_SET(SCU8C, 7)
+SIG_EXPR_DECL(VPOB9, VPO, AA20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF1, AA20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF2, AA20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB9, SIG_EXPR_PTR(VPOB9, VPO),
+ SIG_EXPR_PTR(VPOB9, VPOOFF1), SIG_EXPR_PTR(VPOB9, VPOOFF2));
+SS_PIN_DECL(AA20, GPIOS7, VPOB9);
+
/* RGMII1/RMII1 */
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
@@ -637,6 +1249,481 @@ MS_PIN_DECL_(E6, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
FUNC_GROUP_DECL(RGMII2, B2, B1, A2, B3, D5, D4, C2, C1, C3, D1, D2, E6);
FUNC_GROUP_DECL(RMII2, B2, B1, A2, B3, C2, C3, D1, D2, E6);
+#define F4 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(F4, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, F4);
+
+#define F5 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(F5, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, F5);
+
+#define E2 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(E2, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, E2);
+
+#define E1 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(E1, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, E1);
+
+#define F3 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(F3, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, F3);
+
+#define E3 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(E3, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, E3);
+
+#define G5 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(G5, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, G5);
+
+#define G4 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(G4, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, G4);
+
+#define F2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(F2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, F2);
+
+#define G3 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(G3, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, G3);
+
+#define G2 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(G2, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, G2);
+
+#define F1 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(F1, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, F1);
+
+#define H5 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(H5, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, H5);
+
+#define G1 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(G1, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, G1);
+
+#define H3 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(H3, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, H3);
+
+#define H4 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(H4, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, H4);
+
+#define ACPI_DESC SIG_DESC_SET(HW_STRAP1, 19)
+
+#define R22 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR22, DASHR22, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R22, GPIOY0, SIOS3, DASHR22);
+FUNC_GROUP_DECL(SIOS3, R22);
+
+#define R21 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR21, DASHR21, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R21, GPIOY1, SIOS5, DASHR21);
+FUNC_GROUP_DECL(SIOS5, R21);
+
+#define P22 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP22, DASHP22, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P22, GPIOY2, SIOPWREQ, DASHP22);
+FUNC_GROUP_DECL(SIOPWREQ, P22);
+
+#define P21 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP21, DASHP21, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P21, GPIOY3, SIOONCTRL, DASHP21);
+FUNC_GROUP_DECL(SIOONCTRL, P21);
+
+#define M18 196
+SSSF_PIN_DECL(M18, GPIOY4, SCL1, SIG_DESC_SET(SCUA4, 12));
+
+#define M19 197
+SSSF_PIN_DECL(M19, GPIOY5, SDA1, SIG_DESC_SET(SCUA4, 13));
+
+#define M20 198
+SSSF_PIN_DECL(M20, GPIOY6, SCL2, SIG_DESC_SET(SCUA4, 14));
+
+#define P20 199
+SSSF_PIN_DECL(P20, GPIOY7, SDA2, SIG_DESC_SET(SCUA4, 15));
+
+#define PNOR_DESC SIG_DESC_SET(SCU90, 31)
+
+#define Y20 200
+#define Y20_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(VPOG2, VPO, Y20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, Y20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF2, Y20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO),
+ SIG_EXPR_PTR(VPOG2, VPOOFF1), SIG_EXPR_PTR(VPOG2, VPOOFF2));
+SIG_EXPR_DECL(SIOPBI, SIOPBI, Y20_DESC);
+SIG_EXPR_DECL(SIOPBI, ACPI, Y20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBI, SIOPBI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ0, GPIOZ0);
+MS_PIN_DECL_(Y20, SIG_EXPR_LIST_PTR(VPOG2), SIG_EXPR_LIST_PTR(SIOPBI),
+ SIG_EXPR_LIST_PTR(NORA0), SIG_EXPR_LIST_PTR(GPIOZ0));
+FUNC_GROUP_DECL(SIOPBI, Y20);
+
+#define AB20 201
+#define AB20_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(VPOG3, VPO, AB20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, AB20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF2, AB20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO),
+ SIG_EXPR_PTR(VPOG3, VPOOFF1), SIG_EXPR_PTR(VPOG3, VPOOFF2));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, AB20_DESC);
+SIG_EXPR_DECL(SIOPWRGD, ACPI, AB20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ1, GPIOZ1);
+MS_PIN_DECL_(AB20, SIG_EXPR_LIST_PTR(VPOG3), SIG_EXPR_LIST_PTR(SIOPWRGD),
+ SIG_EXPR_LIST_PTR(NORA1), SIG_EXPR_LIST_PTR(GPIOZ1));
+FUNC_GROUP_DECL(SIOPWRGD, AB20);
+
+#define AB21 202
+#define AB21_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(VPOG4, VPO, AB21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, AB21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF2, AB21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG4, SIG_EXPR_PTR(VPOG4, VPO),
+ SIG_EXPR_PTR(VPOG4, VPOOFF1), SIG_EXPR_PTR(VPOG4, VPOOFF2));
+SIG_EXPR_DECL(SIOPBO, SIOPBO, AB21_DESC);
+SIG_EXPR_DECL(SIOPBO, ACPI, AB21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBO, SIOPBO, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ2, GPIOZ2);
+MS_PIN_DECL_(AB21, SIG_EXPR_LIST_PTR(VPOG4), SIG_EXPR_LIST_PTR(SIOPBO),
+ SIG_EXPR_LIST_PTR(NORA2), SIG_EXPR_LIST_PTR(GPIOZ2));
+FUNC_GROUP_DECL(SIOPBO, AB21);
+
+#define AA21 203
+#define AA21_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(VPOG5, VPO, AA21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, AA21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF2, AA21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG5, SIG_EXPR_PTR(VPOG5, VPO),
+ SIG_EXPR_PTR(VPOG5, VPOOFF1), SIG_EXPR_PTR(VPOG5, VPOOFF2));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, AA21_DESC);
+SIG_EXPR_DECL(SIOSCI, ACPI, AA21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ3, GPIOZ3);
+MS_PIN_DECL_(AA21, SIG_EXPR_LIST_PTR(VPOG5), SIG_EXPR_LIST_PTR(SIOSCI),
+ SIG_EXPR_LIST_PTR(NORA3), SIG_EXPR_LIST_PTR(GPIOZ3));
+FUNC_GROUP_DECL(SIOSCI, AA21);
+
+FUNC_GROUP_DECL(ACPI, R22, R21, P22, P21, Y20, AB20, AB21, AA21);
+
+/* CRT DVO disabled, configured for single-edge mode */
+#define CRT_DVO_DS_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 0, 0 }
+
+/* CRT DVO disabled, configured for dual-edge mode */
+#define CRT_DVO_DD_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 1, 1 }
+
+/* CRT DVO enabled, configured for single-edge mode */
+#define CRT_DVO_ES_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 2, 2 }
+
+/* CRT DVO enabled, configured for dual-edge mode */
+#define CRT_DVO_ED_DESC { ASPEED_IP_GFX, GFX064, GENMASK(7, 6), 3, 3 }
+
+#define U21 204
+#define U21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(VPOG6, VPO, U21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, U21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF2, U21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG6, SIG_EXPR_PTR(VPOG6, VPO),
+ SIG_EXPR_PTR(VPOG6, VPOOFF1), SIG_EXPR_PTR(VPOG6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA4, PNOR, PNOR_DESC);
+MS_PIN_DECL(U21, GPIOZ4, VPOG6, NORA4);
+
+#define W22 205
+#define W22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(VPOG7, VPO, W22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, W22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF2, W22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG7, SIG_EXPR_PTR(VPOG7, VPO),
+ SIG_EXPR_PTR(VPOG7, VPOOFF1), SIG_EXPR_PTR(VPOG7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA5, PNOR, PNOR_DESC);
+MS_PIN_DECL(W22, GPIOZ5, VPOG7, NORA5);
+
+#define V22 206
+#define V22_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(VPOG8, VPO, V22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF1, V22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF2, V22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG8, SIG_EXPR_PTR(VPOG8, VPO),
+ SIG_EXPR_PTR(VPOG8, VPOOFF1), SIG_EXPR_PTR(VPOG8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA6, PNOR, PNOR_DESC);
+MS_PIN_DECL(V22, GPIOZ6, VPOG8, NORA6);
+
+#define W21 207
+#define W21_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(VPOG9, VPO, W21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF1, W21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF2, W21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG9, SIG_EXPR_PTR(VPOG9, VPO),
+ SIG_EXPR_PTR(VPOG9, VPOOFF1), SIG_EXPR_PTR(VPOG9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA7, PNOR, PNOR_DESC);
+MS_PIN_DECL(W21, GPIOZ7, VPOG9, NORA7);
+
+#define Y21 208
+#define Y21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(VPOR2, VPO, Y21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, Y21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF2, Y21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR2, SIG_EXPR_PTR(VPOR2, VPO),
+ SIG_EXPR_PTR(VPOR2, VPOOFF1), SIG_EXPR_PTR(VPOR2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT7, SALT7, Y21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA0, GPIOAA0);
+MS_PIN_DECL_(Y21, SIG_EXPR_LIST_PTR(VPOR2), SIG_EXPR_LIST_PTR(SALT7),
+ SIG_EXPR_LIST_PTR(NORD0), SIG_EXPR_LIST_PTR(GPIOAA0));
+FUNC_GROUP_DECL(SALT7, Y21);
+
+#define V21 209
+#define V21_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(VPOR3, VPO, V21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, V21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF2, V21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR3, SIG_EXPR_PTR(VPOR3, VPO),
+ SIG_EXPR_PTR(VPOR3, VPOOFF1), SIG_EXPR_PTR(VPOR3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT8, SALT8, V21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA1, GPIOAA1);
+MS_PIN_DECL_(V21, SIG_EXPR_LIST_PTR(VPOR3), SIG_EXPR_LIST_PTR(SALT8),
+ SIG_EXPR_LIST_PTR(NORD1), SIG_EXPR_LIST_PTR(GPIOAA1));
+FUNC_GROUP_DECL(SALT8, V21);
+
+#define Y22 210
+#define Y22_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(VPOR4, VPO, Y22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF1, Y22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF2, Y22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR4, SIG_EXPR_PTR(VPOR4, VPO),
+ SIG_EXPR_PTR(VPOR4, VPOOFF1), SIG_EXPR_PTR(VPOR4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT9, SALT9, Y22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA2, GPIOAA2);
+MS_PIN_DECL_(Y22, SIG_EXPR_LIST_PTR(VPOR4), SIG_EXPR_LIST_PTR(SALT9),
+ SIG_EXPR_LIST_PTR(NORD2), SIG_EXPR_LIST_PTR(GPIOAA2));
+FUNC_GROUP_DECL(SALT9, Y22);
+
+#define AA22 211
+#define AA22_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(VPOR5, VPO, AA22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF1, AA22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF2, AA22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR5, SIG_EXPR_PTR(VPOR5, VPO),
+ SIG_EXPR_PTR(VPOR5, VPOOFF1), SIG_EXPR_PTR(VPOR5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT10, SALT10, AA22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA3, GPIOAA3);
+MS_PIN_DECL_(AA22, SIG_EXPR_LIST_PTR(VPOR5), SIG_EXPR_LIST_PTR(SALT10),
+ SIG_EXPR_LIST_PTR(NORD3), SIG_EXPR_LIST_PTR(GPIOAA3));
+FUNC_GROUP_DECL(SALT10, AA22);
+
+#define U22 212
+#define U22_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(VPOR6, VPO, U22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF1, U22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF2, U22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR6, SIG_EXPR_PTR(VPOR6, VPO),
+ SIG_EXPR_PTR(VPOR6, VPOOFF1), SIG_EXPR_PTR(VPOR6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT11, SALT11, U22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD4, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA4, GPIOAA4);
+MS_PIN_DECL_(U22, SIG_EXPR_LIST_PTR(VPOR6), SIG_EXPR_LIST_PTR(SALT11),
+ SIG_EXPR_LIST_PTR(NORD4), SIG_EXPR_LIST_PTR(GPIOAA4));
+FUNC_GROUP_DECL(SALT11, U22);
+
+#define T20 213
+#define T20_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(VPOR7, VPO, T20_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF1, T20_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF2, T20_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR7, SIG_EXPR_PTR(VPOR7, VPO),
+ SIG_EXPR_PTR(VPOR7, VPOOFF1), SIG_EXPR_PTR(VPOR7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT12, SALT12, T20_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD5, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA5, GPIOAA5);
+MS_PIN_DECL_(T20, SIG_EXPR_LIST_PTR(VPOR7), SIG_EXPR_LIST_PTR(SALT12),
+ SIG_EXPR_LIST_PTR(NORD5), SIG_EXPR_LIST_PTR(GPIOAA5));
+FUNC_GROUP_DECL(SALT12, T20);
+
+#define N18 214
+#define N18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(VPOR8, VPO, N18_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF1, N18_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF2, N18_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR8, SIG_EXPR_PTR(VPOR8, VPO),
+ SIG_EXPR_PTR(VPOR8, VPOOFF1), SIG_EXPR_PTR(VPOR8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT13, SALT13, N18_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD6, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA6, GPIOAA6);
+MS_PIN_DECL_(N18, SIG_EXPR_LIST_PTR(VPOR8), SIG_EXPR_LIST_PTR(SALT13),
+ SIG_EXPR_LIST_PTR(NORD6), SIG_EXPR_LIST_PTR(GPIOAA6));
+FUNC_GROUP_DECL(SALT13, N18);
+
+#define P19 215
+#define P19_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(VPOR9, VPO, P19_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF1, P19_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF2, P19_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR9, SIG_EXPR_PTR(VPOR9, VPO),
+ SIG_EXPR_PTR(VPOR9, VPOOFF1), SIG_EXPR_PTR(VPOR9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT14, SALT14, P19_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD7, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA7, GPIOAA7);
+MS_PIN_DECL_(P19, SIG_EXPR_LIST_PTR(VPOR9), SIG_EXPR_LIST_PTR(SALT14),
+ SIG_EXPR_LIST_PTR(NORD7), SIG_EXPR_LIST_PTR(GPIOAA7));
+FUNC_GROUP_DECL(SALT14, P19);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(VPODE, VPO, N19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF1, N19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF2, N19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPODE, SIG_EXPR_PTR(VPODE, VPO),
+ SIG_EXPR_PTR(VPODE, VPOOFF1), SIG_EXPR_PTR(VPODE, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NOROE, PNOR, PNOR_DESC);
+MS_PIN_DECL(N19, GPIOAB0, VPODE, NOROE);
+
+#define T21 217
+#define T21_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(VPOHS, VPO, T21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF1, T21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF2, T21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOHS, SIG_EXPR_PTR(VPOHS, VPO),
+ SIG_EXPR_PTR(VPOHS, VPOOFF1), SIG_EXPR_PTR(VPOHS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORWE, PNOR, PNOR_DESC);
+MS_PIN_DECL(T21, GPIOAB1, VPOHS, NORWE);
+
+FUNC_GROUP_DECL(PNOR, Y20, AB20, AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22,
+ AA22, U22, T20, N18, P19, N19, T21);
+
+#define T22 218
+#define T22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(VPOVS, VPO, T22_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF1, T22_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF2, T22_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOVS, SIG_EXPR_PTR(VPOVS, VPO),
+ SIG_EXPR_PTR(VPOVS, VPOOFF1), SIG_EXPR_PTR(VPOVS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, T22_DESC);
+MS_PIN_DECL(T22, GPIOAB2, VPOVS, WDTRST1);
+FUNC_GROUP_DECL(WDTRST1, T22);
+
+#define R20 219
+#define R20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(VPOCLK, VPO, R20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF1, R20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF2, R20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOCLK, SIG_EXPR_PTR(VPOCLK, VPO),
+ SIG_EXPR_PTR(VPOCLK, VPOOFF1), SIG_EXPR_PTR(VPOCLK, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, R20_DESC);
+MS_PIN_DECL(R20, GPIOAB3, VPOCLK, WDTRST2);
+FUNC_GROUP_DECL(WDTRST2, R20);
+
+FUNC_GROUP_DECL(VPO, V20, U19, R18, P18, R19, W20, U20, AA20, Y20, AB20,
+ AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22, AA22, U22, T20,
+ N18, P19, N19, T21, T22, R20);
+
+#define ESPI_DESC SIG_DESC_SET(HW_STRAP1, 25)
+
+#define G21 224
+SIG_EXPR_LIST_DECL_SINGLE(ESPID0, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD0, LAD0, SIG_DESC_SET(SCUAC, 0));
+MS_PIN_DECL(G21, GPIOAC0, ESPID0, LAD0);
+FUNC_GROUP_DECL(LAD0, G21);
+
+#define G20 225
+SIG_EXPR_LIST_DECL_SINGLE(ESPID1, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD1, LAD1, SIG_DESC_SET(SCUAC, 1));
+MS_PIN_DECL(G20, GPIOAC1, ESPID1, LAD1);
+FUNC_GROUP_DECL(LAD1, G20);
+
+#define D22 226
+SIG_EXPR_LIST_DECL_SINGLE(ESPID2, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD2, LAD2, SIG_DESC_SET(SCUAC, 2));
+MS_PIN_DECL(D22, GPIOAC2, ESPID2, LAD2);
+FUNC_GROUP_DECL(LAD2, D22);
+
+#define E22 227
+SIG_EXPR_LIST_DECL_SINGLE(ESPID3, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD3, LAD3, SIG_DESC_SET(SCUAC, 3));
+MS_PIN_DECL(E22, GPIOAC3, ESPID3, LAD3);
+FUNC_GROUP_DECL(LAD3, E22);
+
+#define C22 228
+SIG_EXPR_LIST_DECL_SINGLE(ESPICK, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LCLK, LCLK, SIG_DESC_SET(SCUAC, 4));
+MS_PIN_DECL(C22, GPIOAC4, ESPICK, LCLK);
+FUNC_GROUP_DECL(LCLK, C22);
+
+#define F21 229
+SIG_EXPR_LIST_DECL_SINGLE(ESPICS, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LFRAME, LFRAME, SIG_DESC_SET(SCUAC, 5));
+MS_PIN_DECL(F21, GPIOAC5, ESPICS, LFRAME);
+FUNC_GROUP_DECL(LFRAME, F21);
+
+#define F22 230
+SIG_EXPR_LIST_DECL_SINGLE(ESPIALT, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LSIRQ, LSIRQ, SIG_DESC_SET(SCUAC, 6));
+MS_PIN_DECL(F22, GPIOAC6, ESPIALT, LSIRQ);
+FUNC_GROUP_DECL(LSIRQ, F22);
+
+#define G22 231
+SIG_EXPR_LIST_DECL_SINGLE(ESPIRST, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCRST, LPCRST, SIG_DESC_SET(SCUAC, 7));
+MS_PIN_DECL(G22, GPIOAC7, ESPIRST, LPCRST);
+FUNC_GROUP_DECL(LPCRST, G22);
+
+FUNC_GROUP_DECL(ESPI, G21, G20, D22, E22, C22, F21, F22, G22);
+
/* Pins, groups and functions are sort(1):ed alphabetically for sanity */
static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
@@ -646,12 +1733,32 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(A13),
ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
+ ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
+ ASPEED_PINCTRL_PIN(A21),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
+ ASPEED_PINCTRL_PIN(AA19),
+ ASPEED_PINCTRL_PIN(AA2),
+ ASPEED_PINCTRL_PIN(AA20),
+ ASPEED_PINCTRL_PIN(AA21),
+ ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB20),
+ ASPEED_PINCTRL_PIN(AB21),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
ASPEED_PINCTRL_PIN(B1),
ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
@@ -660,8 +1767,13 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
+ ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
ASPEED_PINCTRL_PIN(B20),
+ ASPEED_PINCTRL_PIN(B21),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
ASPEED_PINCTRL_PIN(B5),
@@ -673,62 +1785,210 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
ASPEED_PINCTRL_PIN(C16),
+ ASPEED_PINCTRL_PIN(C17),
ASPEED_PINCTRL_PIN(C18),
+ ASPEED_PINCTRL_PIN(C19),
ASPEED_PINCTRL_PIN(C2),
ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(D1),
ASPEED_PINCTRL_PIN(D10),
+ ASPEED_PINCTRL_PIN(D13),
+ ASPEED_PINCTRL_PIN(D14),
+ ASPEED_PINCTRL_PIN(D15),
+ ASPEED_PINCTRL_PIN(D16),
+ ASPEED_PINCTRL_PIN(D17),
+ ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D20),
+ ASPEED_PINCTRL_PIN(D21),
+ ASPEED_PINCTRL_PIN(D22),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
ASPEED_PINCTRL_PIN(D8),
ASPEED_PINCTRL_PIN(D9),
+ ASPEED_PINCTRL_PIN(E1),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E12),
ASPEED_PINCTRL_PIN(E13),
+ ASPEED_PINCTRL_PIN(E14),
ASPEED_PINCTRL_PIN(E15),
+ ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E17),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
+ ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E21),
+ ASPEED_PINCTRL_PIN(E22),
+ ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F1),
+ ASPEED_PINCTRL_PIN(F17),
+ ASPEED_PINCTRL_PIN(F18),
ASPEED_PINCTRL_PIN(F19),
+ ASPEED_PINCTRL_PIN(F2),
ASPEED_PINCTRL_PIN(F20),
+ ASPEED_PINCTRL_PIN(F21),
+ ASPEED_PINCTRL_PIN(F22),
+ ASPEED_PINCTRL_PIN(F3),
+ ASPEED_PINCTRL_PIN(F4),
+ ASPEED_PINCTRL_PIN(F5),
ASPEED_PINCTRL_PIN(F9),
+ ASPEED_PINCTRL_PIN(G1),
+ ASPEED_PINCTRL_PIN(G17),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G2),
+ ASPEED_PINCTRL_PIN(G20),
+ ASPEED_PINCTRL_PIN(G21),
+ ASPEED_PINCTRL_PIN(G22),
+ ASPEED_PINCTRL_PIN(G3),
+ ASPEED_PINCTRL_PIN(G4),
+ ASPEED_PINCTRL_PIN(G5),
+ ASPEED_PINCTRL_PIN(H18),
+ ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H21),
+ ASPEED_PINCTRL_PIN(H22),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(H5),
+ ASPEED_PINCTRL_PIN(J18),
+ ASPEED_PINCTRL_PIN(J19),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K19),
ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
ASPEED_PINCTRL_PIN(L2),
ASPEED_PINCTRL_PIN(L3),
ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M20),
ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
ASPEED_PINCTRL_PIN(N2),
ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
ASPEED_PINCTRL_PIN(N22),
ASPEED_PINCTRL_PIN(N3),
ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
ASPEED_PINCTRL_PIN(P1),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
ASPEED_PINCTRL_PIN(P2),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P3),
+ ASPEED_PINCTRL_PIN(P4),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R1),
+ ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R19),
+ ASPEED_PINCTRL_PIN(R2),
+ ASPEED_PINCTRL_PIN(R20),
+ ASPEED_PINCTRL_PIN(R21),
+ ASPEED_PINCTRL_PIN(R22),
+ ASPEED_PINCTRL_PIN(R3),
+ ASPEED_PINCTRL_PIN(R4),
+ ASPEED_PINCTRL_PIN(R5),
+ ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T17),
+ ASPEED_PINCTRL_PIN(T19),
+ ASPEED_PINCTRL_PIN(T2),
+ ASPEED_PINCTRL_PIN(T20),
+ ASPEED_PINCTRL_PIN(T21),
+ ASPEED_PINCTRL_PIN(T22),
+ ASPEED_PINCTRL_PIN(T3),
ASPEED_PINCTRL_PIN(T4),
+ ASPEED_PINCTRL_PIN(T5),
+ ASPEED_PINCTRL_PIN(U1),
+ ASPEED_PINCTRL_PIN(U19),
+ ASPEED_PINCTRL_PIN(U2),
+ ASPEED_PINCTRL_PIN(U20),
+ ASPEED_PINCTRL_PIN(U21),
+ ASPEED_PINCTRL_PIN(U22),
ASPEED_PINCTRL_PIN(U3),
+ ASPEED_PINCTRL_PIN(U4),
+ ASPEED_PINCTRL_PIN(U5),
+ ASPEED_PINCTRL_PIN(V1),
+ ASPEED_PINCTRL_PIN(V19),
ASPEED_PINCTRL_PIN(V2),
+ ASPEED_PINCTRL_PIN(V20),
+ ASPEED_PINCTRL_PIN(V21),
+ ASPEED_PINCTRL_PIN(V22),
ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W19),
ASPEED_PINCTRL_PIN(W2),
+ ASPEED_PINCTRL_PIN(W20),
+ ASPEED_PINCTRL_PIN(W21),
+ ASPEED_PINCTRL_PIN(W22),
ASPEED_PINCTRL_PIN(W3),
+ ASPEED_PINCTRL_PIN(W4),
+ ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y19),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y20),
+ ASPEED_PINCTRL_PIN(Y21),
+ ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
+ ASPEED_PINCTRL_PIN(Y4),
+ ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
};
static const struct aspeed_pin_group aspeed_g5_groups[] = {
+ ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
+ ASPEED_PINCTRL_GROUP(BMCINT),
+ ASPEED_PINCTRL_GROUP(DDCCLK),
+ ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(ESPI),
+ ASPEED_PINCTRL_GROUP(FWSPICS1),
+ ASPEED_PINCTRL_GROUP(FWSPICS2),
ASPEED_PINCTRL_GROUP(GPID0),
ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
+ ASPEED_PINCTRL_GROUP(GPIE2),
+ ASPEED_PINCTRL_GROUP(GPIE4),
+ ASPEED_PINCTRL_GROUP(GPIE6),
ASPEED_PINCTRL_GROUP(I2C10),
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
@@ -741,11 +2001,50 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(I2C7),
ASPEED_PINCTRL_GROUP(I2C8),
ASPEED_PINCTRL_GROUP(I2C9),
+ ASPEED_PINCTRL_GROUP(LAD0),
+ ASPEED_PINCTRL_GROUP(LAD1),
+ ASPEED_PINCTRL_GROUP(LAD2),
+ ASPEED_PINCTRL_GROUP(LAD3),
+ ASPEED_PINCTRL_GROUP(LCLK),
+ ASPEED_PINCTRL_GROUP(LFRAME),
+ ASPEED_PINCTRL_GROUP(LPCHC),
+ ASPEED_PINCTRL_GROUP(LPCPD),
+ ASPEED_PINCTRL_GROUP(LPCPLUS),
+ ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
+ ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(LSIRQ),
ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
+ ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
+ ASPEED_PINCTRL_GROUP(NCTS3),
+ ASPEED_PINCTRL_GROUP(NCTS4),
+ ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
+ ASPEED_PINCTRL_GROUP(NDCD3),
+ ASPEED_PINCTRL_GROUP(NDCD4),
+ ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
+ ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
+ ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
+ ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
+ ASPEED_PINCTRL_GROUP(NRI3),
+ ASPEED_PINCTRL_GROUP(NRI4),
+ ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
+ ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(NRTS4),
ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PEWAKE),
+ ASPEED_PINCTRL_GROUP(PNOR),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -758,22 +2057,102 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
ASPEED_PINCTRL_GROUP(RMII2),
+ ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
+ ASPEED_PINCTRL_GROUP(RXD3),
+ ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT10),
+ ASPEED_PINCTRL_GROUP(SALT11),
+ ASPEED_PINCTRL_GROUP(SALT12),
+ ASPEED_PINCTRL_GROUP(SALT13),
+ ASPEED_PINCTRL_GROUP(SALT14),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
+ ASPEED_PINCTRL_GROUP(SALT5),
+ ASPEED_PINCTRL_GROUP(SALT6),
+ ASPEED_PINCTRL_GROUP(SALT7),
+ ASPEED_PINCTRL_GROUP(SALT8),
+ ASPEED_PINCTRL_GROUP(SALT9),
+ ASPEED_PINCTRL_GROUP(SCL1),
+ ASPEED_PINCTRL_GROUP(SCL2),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SDA1),
+ ASPEED_PINCTRL_GROUP(SDA2),
+ ASPEED_PINCTRL_GROUP(SGPS1),
+ ASPEED_PINCTRL_GROUP(SGPS2),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
+ ASPEED_PINCTRL_GROUP(SIOPBI),
+ ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1CS1),
ASPEED_PINCTRL_GROUP(SPI1DEBUG),
ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPI2CK),
+ ASPEED_PINCTRL_GROUP(SPI2CS0),
+ ASPEED_PINCTRL_GROUP(SPI2CS1),
+ ASPEED_PINCTRL_GROUP(SPI2MISO),
+ ASPEED_PINCTRL_GROUP(SPI2MOSI),
+ ASPEED_PINCTRL_GROUP(TIMER3),
ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
+ ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
+ ASPEED_PINCTRL_GROUP(TXD3),
+ ASPEED_PINCTRL_GROUP(TXD4),
+ ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
ASPEED_PINCTRL_GROUP(VGABIOSROM),
+ ASPEED_PINCTRL_GROUP(VGAHS),
+ ASPEED_PINCTRL_GROUP(VGAVS),
+ ASPEED_PINCTRL_GROUP(VPI24),
+ ASPEED_PINCTRL_GROUP(VPO),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g5_functions[] = {
+ ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
+ ASPEED_PINCTRL_FUNC(BMCINT),
+ ASPEED_PINCTRL_FUNC(DDCCLK),
+ ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(ESPI),
+ ASPEED_PINCTRL_FUNC(FWSPICS1),
+ ASPEED_PINCTRL_FUNC(FWSPICS2),
ASPEED_PINCTRL_FUNC(GPID0),
ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
+ ASPEED_PINCTRL_FUNC(GPIE2),
+ ASPEED_PINCTRL_FUNC(GPIE4),
+ ASPEED_PINCTRL_FUNC(GPIE6),
ASPEED_PINCTRL_FUNC(I2C10),
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
@@ -786,11 +2165,50 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(I2C7),
ASPEED_PINCTRL_FUNC(I2C8),
ASPEED_PINCTRL_FUNC(I2C9),
+ ASPEED_PINCTRL_FUNC(LAD0),
+ ASPEED_PINCTRL_FUNC(LAD1),
+ ASPEED_PINCTRL_FUNC(LAD2),
+ ASPEED_PINCTRL_FUNC(LAD3),
+ ASPEED_PINCTRL_FUNC(LCLK),
+ ASPEED_PINCTRL_FUNC(LFRAME),
+ ASPEED_PINCTRL_FUNC(LPCHC),
+ ASPEED_PINCTRL_FUNC(LPCPD),
+ ASPEED_PINCTRL_FUNC(LPCPLUS),
+ ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
+ ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(LSIRQ),
ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
+ ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
+ ASPEED_PINCTRL_FUNC(NCTS3),
+ ASPEED_PINCTRL_FUNC(NCTS4),
+ ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
+ ASPEED_PINCTRL_FUNC(NDCD3),
+ ASPEED_PINCTRL_FUNC(NDCD4),
+ ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
+ ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
+ ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
+ ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
+ ASPEED_PINCTRL_FUNC(NRI3),
+ ASPEED_PINCTRL_FUNC(NRI4),
+ ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
+ ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(NRTS4),
ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PEWAKE),
+ ASPEED_PINCTRL_FUNC(PNOR),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -803,16 +2221,68 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
ASPEED_PINCTRL_FUNC(RMII2),
+ ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
+ ASPEED_PINCTRL_FUNC(RXD3),
+ ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT10),
+ ASPEED_PINCTRL_FUNC(SALT11),
+ ASPEED_PINCTRL_FUNC(SALT12),
+ ASPEED_PINCTRL_FUNC(SALT13),
+ ASPEED_PINCTRL_FUNC(SALT14),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
+ ASPEED_PINCTRL_FUNC(SALT5),
+ ASPEED_PINCTRL_FUNC(SALT6),
+ ASPEED_PINCTRL_FUNC(SALT7),
+ ASPEED_PINCTRL_FUNC(SALT8),
+ ASPEED_PINCTRL_FUNC(SALT9),
+ ASPEED_PINCTRL_FUNC(SCL1),
+ ASPEED_PINCTRL_FUNC(SCL2),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SDA1),
+ ASPEED_PINCTRL_FUNC(SDA2),
+ ASPEED_PINCTRL_FUNC(SGPS1),
+ ASPEED_PINCTRL_FUNC(SGPS2),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
+ ASPEED_PINCTRL_FUNC(SIOPBI),
+ ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1CS1),
ASPEED_PINCTRL_FUNC(SPI1DEBUG),
ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPI2CK),
+ ASPEED_PINCTRL_FUNC(SPI2CS0),
+ ASPEED_PINCTRL_FUNC(SPI2CS1),
+ ASPEED_PINCTRL_FUNC(SPI2MISO),
+ ASPEED_PINCTRL_FUNC(SPI2MOSI),
+ ASPEED_PINCTRL_FUNC(TIMER3),
ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
+ ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
+ ASPEED_PINCTRL_FUNC(TXD3),
+ ASPEED_PINCTRL_FUNC(TXD4),
+ ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
ASPEED_PINCTRL_FUNC(VGABIOSROM),
+ ASPEED_PINCTRL_FUNC(VGAHS),
+ ASPEED_PINCTRL_FUNC(VGAVS),
+ ASPEED_PINCTRL_FUNC(VPI24),
+ ASPEED_PINCTRL_FUNC(VPO),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g5_pinctrl_data = {
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 0e93cbf2ff33..08a10d4db229 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -260,6 +260,7 @@
#define SCUA0 0xA0 /* Multi-function Pin Control #7 */
#define SCUA4 0xA4 /* Multi-function Pin Control #8 */
#define SCUA8 0xA8 /* Multi-function Pin Control #9 */
+#define SCUAC 0xAC /* Multi-function Pin Control #10 */
#define HW_STRAP2 0xD0 /* Strapping */
/**
--
2.9.3
^ permalink raw reply related
* [PATCH v4 3/5] pinctrl: aspeed-g4: Add mux configuration for all pins
From: Andrew Jeffery @ 2016-12-20 7:35 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, linux-gpio, devicetree, linux-kernel,
Timothy Pearson
In-Reply-To: <20161220073551.28522-1-andrew@aj.id.au>
The patch introducing the g4 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms. Now, update the bindings document
to reflect the complete functionality and implement the necessary pin
configuration tables in the driver.
Cc: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 19 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1097 +++++++++++++++++++-
2 files changed, 1096 insertions(+), 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index fb7694ec033d..a645d0be3347 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -44,13 +44,18 @@ supported:
aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:
-ACPI BMCINT DDCCLK DDCDAT FLACK FLBUSY FLWP GPID0 GPIE0 GPIE2 GPIE4 GPIE6 I2C10
-I2C11 I2C12 I2C13 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCSMI MDIO1
-MDIO2 NCTS1 NCTS3 NCTS4 NDCD1 NDCD3 NDCD4 NDSR1 NDSR3 NDTR1 NDTR3 NRI1 NRI3
-NRI4 NRTS1 NRTS3 PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RMII1 ROM16
-ROM8 ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD3 RXD4 SD1 SGPMI SIOPBI SIOPBO TIMER3
-TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD3 TXD4 UART6 VGAHS VGAVS VPI18 VPI24 VPI30
-VPO12 VPO24
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
+GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
+I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
+MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
+NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0
+PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
+ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
+SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
+TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS
+VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index 558bd102416c..09b668415c56 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -43,9 +43,18 @@
* Not all pins have their signals defined (yet).
*/
+#define D6 0
+SSSF_PIN_DECL(D6, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+
+#define B5 1
+SSSF_PIN_DECL(B5, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
#define A4 2
SSSF_PIN_DECL(A4, GPIOA2, TIMER3, SIG_DESC_SET(SCU80, 2));
+#define E6 3
+SSSF_PIN_DECL(E6, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
+
#define I2C9_DESC SIG_DESC_SET(SCU90, 22)
#define C5 4
@@ -80,6 +89,26 @@ MS_PIN_DECL(D5, GPIOA7, MDIO2, TIMER8);
FUNC_GROUP_DECL(TIMER8, D5);
FUNC_GROUP_DECL(MDIO2, A3, D5);
+#define J21 8
+SSSF_PIN_DECL(J21, GPIOB0, SALT1, SIG_DESC_SET(SCU80, 8));
+
+#define J20 9
+SSSF_PIN_DECL(J20, GPIOB1, SALT2, SIG_DESC_SET(SCU80, 9));
+
+#define H18 10
+SSSF_PIN_DECL(H18, GPIOB2, SALT3, SIG_DESC_SET(SCU80, 10));
+
+#define F18 11
+SSSF_PIN_DECL(F18, GPIOB3, SALT4, SIG_DESC_SET(SCU80, 11));
+
+#define E19 12
+SIG_EXPR_DECL(LPCRST, LPCRST, SIG_DESC_SET(SCU80, 12));
+SIG_EXPR_DECL(LPCRST, LPCRSTS, SIG_DESC_SET(HW_STRAP1, 14));
+SIG_EXPR_LIST_DECL_DUAL(LPCRST, LPCRST, LPCRSTS);
+SS_PIN_DECL(E19, GPIOB4, LPCRST);
+
+FUNC_GROUP_DECL(LPCRST, E19);
+
#define H19 13
#define H19_DESC SIG_DESC_SET(SCU80, 13)
SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H19_DESC);
@@ -92,6 +121,19 @@ FUNC_GROUP_DECL(LPCSMI, H19);
#define H20 14
SSSF_PIN_DECL(H20, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+#define E18 15
+SIG_EXPR_LIST_DECL_SINGLE(EXTRST, EXTRST,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_BIT(SCU90, 31, 0),
+ SIG_DESC_SET(SCU3C, 3));
+SIG_EXPR_LIST_DECL_SINGLE(SPICS1, SPICS1,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_SET(SCU90, 31));
+MS_PIN_DECL(E18, GPIOB7, EXTRST, SPICS1);
+
+FUNC_GROUP_DECL(EXTRST, E18);
+FUNC_GROUP_DECL(SPICS1, E18);
+
#define SD1_DESC SIG_DESC_SET(SCU90, 0)
#define I2C10_DESC SIG_DESC_SET(SCU90, 23)
@@ -170,6 +212,62 @@ MS_PIN_DECL(D16, GPIOD1, SD2CMD, GPID0OUT);
FUNC_GROUP_DECL(GPID0, A18, D16);
+#define GPID2_DESC SIG_DESC_SET(SCU8C, 9)
+
+#define B17 26
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT0, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2IN, GPID2, GPID);
+MS_PIN_DECL(B17, GPIOD2, SD2DAT0, GPID2IN);
+
+#define A17 27
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT1, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2OUT, GPID2, GPID);
+MS_PIN_DECL(A17, GPIOD3, SD2DAT1, GPID2OUT);
+
+FUNC_GROUP_DECL(GPID2, B17, A17);
+
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define C16 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(C16, GPIOD4, SD2DAT2, GPID4IN);
+
+#define B16 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(B16, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, C16, B16);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define A16 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(A16, GPIOD6, SD2CD, GPID6IN);
+
+#define E15 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(E15, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, A16, E15);
+FUNC_GROUP_DECL(SD2, A18, D16, B17, A17, C16, B16, A16, E15);
+FUNC_GROUP_DECL(GPID, A18, D16, B17, A17, C16, B16, A16, E15);
+
#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
@@ -266,6 +364,15 @@ MS_PIN_DECL(B19, GPIOF1, NDCD4, SIOPBI);
FUNC_GROUP_DECL(NDCD4, B19);
FUNC_GROUP_DECL(SIOPBI, B19);
+#define A20 42
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, SIG_DESC_SET(SCUA4, 12));
+SIG_EXPR_DECL(SIOPWRGD, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+MS_PIN_DECL(A20, GPIOF2, NDSR4, SIOPWRGD);
+FUNC_GROUP_DECL(NDSR4, A20);
+FUNC_GROUP_DECL(SIOPWRGD, A20);
+
#define D17 43
SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
SIG_EXPR_DECL(SIOPBO, SIOPBO, SIG_DESC_SET(SCUA4, 14));
@@ -275,7 +382,17 @@ MS_PIN_DECL(D17, GPIOF3, NRI4, SIOPBO);
FUNC_GROUP_DECL(NRI4, D17);
FUNC_GROUP_DECL(SIOPBO, D17);
-FUNC_GROUP_DECL(ACPI, B19, D17);
+#define B18 44
+SSSF_PIN_DECL(B18, GPIOF4, NDTR4, SIG_DESC_SET(SCU80, 28));
+
+#define A19 45
+SIG_EXPR_LIST_DECL_SINGLE(NDTS4, NDTS4, SIG_DESC_SET(SCU80, 29));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, SIG_DESC_SET(SCUA4, 15));
+SIG_EXPR_DECL(SIOSCI, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+MS_PIN_DECL(A19, GPIOF5, NDTS4, SIOSCI);
+FUNC_GROUP_DECL(NDTS4, A19);
+FUNC_GROUP_DECL(SIOSCI, A19);
#define E16 46
SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
@@ -283,6 +400,34 @@ SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
#define C17 47
SSSF_PIN_DECL(C17, GPIOF7, RXD4, SIG_DESC_SET(SCU80, 31));
+#define A14 48
+SSSF_PIN_DECL(A14, GPIOG0, SGPSCK, SIG_DESC_SET(SCU84, 0));
+
+#define E13 49
+SSSF_PIN_DECL(E13, GPIOG1, SGPSLD, SIG_DESC_SET(SCU84, 1));
+
+#define D13 50
+SSSF_PIN_DECL(D13, GPIOG2, SGPSI0, SIG_DESC_SET(SCU84, 2));
+
+#define C13 51
+SSSF_PIN_DECL(C13, GPIOG3, SGPSI1, SIG_DESC_SET(SCU84, 3));
+
+#define B13 52
+SIG_EXPR_LIST_DECL_SINGLE(OSCCLK, OSCCLK, SIG_DESC_SET(SCU2C, 1));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(B13, GPIOG4, OSCCLK, WDTRST1);
+
+FUNC_GROUP_DECL(OSCCLK, B13);
+FUNC_GROUP_DECL(WDTRST1, B13);
+
+#define Y21 53
+SIG_EXPR_LIST_DECL_SINGLE(USBCKI, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(Y21, GPIOG5, USBCKI, WDTRST2);
+
+FUNC_GROUP_DECL(USBCKI, Y21);
+FUNC_GROUP_DECL(WDTRST2, Y21);
+
#define AA22 54
SSSF_PIN_DECL(AA22, GPIOG6, FLBUSY, SIG_DESC_SET(SCU84, 6));
@@ -352,6 +497,93 @@ MS_PIN_DECL(E7, GPIOH7, ROMD15, RXD6);
FUNC_GROUP_DECL(UART6, A8, C7, B7, A7, D7, B6, A6, E7);
+#define SPI1_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
+
+#define C22 64
+SIG_EXPR_DECL(SYSCS, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCS, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCS, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C22, GPIOI0, SYSCS);
+
+#define G18 65
+SIG_EXPR_DECL(SYSCK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCK, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(G18, GPIOI1, SYSCK);
+
+#define D19 66
+SIG_EXPR_DECL(SYSDO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDO, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(D19, GPIOI2, SYSDO);
+
+#define C20 67
+SIG_EXPR_DECL(SYSDI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDI, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C20, GPIOI3, SYSDI);
+
+#define VB_DESC SIG_DESC_SET(HW_STRAP1, 5)
+
+#define B22 68
+SIG_EXPR_DECL(SPI1CS0, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CS0, SIG_EXPR_PTR(SPI1CS0, SPI1),
+ SIG_EXPR_PTR(SPI1CS0, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CS0, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCS, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(B22, GPIOI4, SPI1CS0, VBCS);
+
+#define G19 69
+SIG_EXPR_DECL(SPI1CK, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CK, SIG_EXPR_PTR(SPI1CK, SPI1),
+ SIG_EXPR_PTR(SPI1CK, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CK, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCK, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(G19, GPIOI5, SPI1CK, VBCK);
+
+#define C18 70
+SIG_EXPR_DECL(SPI1DO, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DO, SIG_EXPR_PTR(SPI1DO, SPI1),
+ SIG_EXPR_PTR(SPI1DO, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DO, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDO, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(C18, GPIOI6, SPI1DO, VBDO);
+
+#define E20 71
+SIG_EXPR_DECL(SPI1DI, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DI, SIG_EXPR_PTR(SPI1DI, SPI1),
+ SIG_EXPR_PTR(SPI1DI, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DI, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDI, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(E20, GPIOI7, SPI1DI, VBDI);
+
+FUNC_GROUP_DECL(SPI1, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1DEBUG, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1PASSTHRU, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(VGABIOS_ROM, B22, G19, C18, E20);
+
+#define J5 72
+SSSF_PIN_DECL(J5, GPIOJ0, SGPMCK, SIG_DESC_SET(SCU84, 8));
+
+#define J4 73
+SSSF_PIN_DECL(J4, GPIOJ1, SGPMLD, SIG_DESC_SET(SCU84, 9));
+
+#define K5 74
+SSSF_PIN_DECL(K5, GPIOJ2, SGPMO, SIG_DESC_SET(SCU84, 10));
+
#define J3 75
SSSF_PIN_DECL(J3, GPIOJ3, SGPMI, SIG_DESC_SET(SCU84, 11));
@@ -496,6 +728,102 @@ SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, U5_DESC);
MS_PIN_DECL(U5, GPIOL7, VPIB1, RXD1);
FUNC_GROUP_DECL(RXD1, U5);
+#define V3 96
+#define V3_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_DECL(VPIOB2, VPI18, VPI18_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI24, VPI24_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI30, VPI30_DESC, V3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB2, SIG_EXPR_PTR(VPIOB2, VPI18),
+ SIG_EXPR_PTR(VPIOB2, VPI24),
+ SIG_EXPR_PTR(VPIOB2, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, V3_DESC);
+MS_PIN_DECL(V3, GPIOM0, VPIOB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, V3);
+
+#define W2 97
+#define W2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_DECL(VPIOB3, VPI18, VPI18_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI24, VPI24_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI30, VPI30_DESC, W2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB3, SIG_EXPR_PTR(VPIOB3, VPI18),
+ SIG_EXPR_PTR(VPIOB3, VPI24),
+ SIG_EXPR_PTR(VPIOB3, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, W2_DESC);
+MS_PIN_DECL(W2, GPIOM1, VPIOB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, W2);
+
+#define Y1 98
+#define Y1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_DECL(VPIOB4, VPI18, VPI18_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI24, VPI24_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI30, VPI30_DESC, Y1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB4, SIG_EXPR_PTR(VPIOB4, VPI18),
+ SIG_EXPR_PTR(VPIOB4, VPI24),
+ SIG_EXPR_PTR(VPIOB4, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, Y1_DESC);
+MS_PIN_DECL(Y1, GPIOM2, VPIOB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, Y1);
+
+#define V4 99
+#define V4_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_DECL(VPIOB5, VPI18, VPI18_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI24, VPI24_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI30, VPI30_DESC, V4_DESC);
+SIG_EXPR_LIST_DECL(VPIOB5, SIG_EXPR_PTR(VPIOB5, VPI18),
+ SIG_EXPR_PTR(VPIOB5, VPI24),
+ SIG_EXPR_PTR(VPIOB5, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, V4_DESC);
+MS_PIN_DECL(V4, GPIOM3, VPIOB5, NRI2);
+FUNC_GROUP_DECL(NRI2, V4);
+
+#define W3 100
+#define W3_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_DECL(VPIOB6, VPI18, VPI18_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI24, VPI24_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI30, VPI30_DESC, W3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB6, SIG_EXPR_PTR(VPIOB6, VPI18),
+ SIG_EXPR_PTR(VPIOB6, VPI24),
+ SIG_EXPR_PTR(VPIOB6, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, W3_DESC);
+MS_PIN_DECL(W3, GPIOM4, VPIOB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, W3);
+
+#define Y2 101
+#define Y2_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_DECL(VPIOB7, VPI18, VPI18_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI24, VPI24_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI30, VPI30_DESC, Y2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB7, SIG_EXPR_PTR(VPIOB7, VPI18),
+ SIG_EXPR_PTR(VPIOB7, VPI24),
+ SIG_EXPR_PTR(VPIOB7, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, Y2_DESC);
+MS_PIN_DECL(Y2, GPIOM5, VPIOB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, Y2);
+
+#define AA1 102
+#define AA1_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_DECL(VPIOB8, VPI18, VPI18_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI24, VPI24_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI30, VPI30_DESC, AA1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB8, SIG_EXPR_PTR(VPIOB8, VPI18),
+ SIG_EXPR_PTR(VPIOB8, VPI24),
+ SIG_EXPR_PTR(VPIOB8, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, AA1_DESC);
+MS_PIN_DECL(AA1, GPIOM6, VPIOB8, TXD2);
+FUNC_GROUP_DECL(TXD2, AA1);
+
+#define V5 103
+#define V5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_DECL(VPIOB9, VPI18, VPI18_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI24, VPI24_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI30, VPI30_DESC, V5_DESC);
+SIG_EXPR_LIST_DECL(VPIOB9, SIG_EXPR_PTR(VPIOB9, VPI18),
+ SIG_EXPR_PTR(VPIOB9, VPI24),
+ SIG_EXPR_PTR(VPIOB9, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, V5_DESC);
+MS_PIN_DECL(V5, GPIOM7, VPIOB9, RXD2);
+FUNC_GROUP_DECL(RXD2, V5);
+
#define W4 104
#define W4_DESC SIG_DESC_SET(SCU88, 0)
SIG_EXPR_LIST_DECL_SINGLE(VPIG0, VPI30, VPI30_DESC, W4_DESC);
@@ -580,10 +908,57 @@ SS_PIN_DECL(V6, GPIOO0, VPIG8);
SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9));
SS_PIN_DECL(Y5, GPIOO1, VPIG9);
-FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2);
-FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2, V6, Y5);
-FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, W4, Y3, AA22, W5, Y4, AA3,
- AB2);
+#define AA4 114
+SIG_EXPR_LIST_DECL_SINGLE(VPIR0, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(AA4, GPIOO2, VPIR0);
+
+#define AB3 115
+SIG_EXPR_LIST_DECL_SINGLE(VPIR1, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB3, GPIOO3, VPIR1);
+
+#define W6 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12));
+SS_PIN_DECL(W6, GPIOO4, VPIR2);
+
+#define AA5 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13));
+SS_PIN_DECL(AA5, GPIOO5, VPIR3);
+
+#define AB4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14));
+SS_PIN_DECL(AB4, GPIOO6, VPIR4);
+
+#define V7 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15));
+SS_PIN_DECL(V7, GPIOO7, VPIR5);
+
+#define Y6 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16));
+SS_PIN_DECL(Y6, GPIOP0, VPIR6);
+
+#define AB5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17));
+SS_PIN_DECL(AB5, GPIOP1, VPIR7);
+
+#define W7 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18));
+SS_PIN_DECL(W7, GPIOP2, VPIR8);
+
+#define AA6 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19));
+SS_PIN_DECL(AA6, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2);
+FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2, V6, Y5, W6, AA5, AB4, V7, Y6, AB5, W7,
+ AA6);
+FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, V3, W2, Y1, V4, W3, Y2, AA1,
+ V5, W4, Y3, AA22, W5, Y4, AA3, AB2, AA4, AB3);
+
+#define AB6 124
+SIG_EXPR_LIST_DECL_SINGLE(GPIOP4, GPIOP4);
+MS_PIN_DECL_(AB6, SIG_EXPR_LIST_PTR(GPIOP4));
#define Y7 125
SIG_EXPR_LIST_DECL_SINGLE(GPIOP5, GPIOP5);
@@ -619,6 +994,18 @@ SS_PIN_DECL(F5, GPIOQ3, SDA4);
FUNC_GROUP_DECL(I2C4, B1, F5);
+#define I2C14_DESC SIG_DESC_SET(SCU90, 27)
+
+#define H4 132
+SIG_EXPR_LIST_DECL_SINGLE(SCL14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H4, GPIOQ4, SCL14);
+
+#define H3 133
+SIG_EXPR_LIST_DECL_SINGLE(SDA14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H3, GPIOQ5, SDA14);
+
+FUNC_GROUP_DECL(I2C14, H4, H3);
+
#define DASH9028_DESC SIG_DESC_SET(SCU90, 28)
#define H2 134
@@ -776,13 +1163,6 @@ SIG_EXPR_LIST_DECL(ROMA23, SIG_EXPR_PTR(ROMA23, ROM8),
SIG_EXPR_LIST_DECL_SINGLE(VPOR5, VPO24, K18_DESC, VPO_24_OFF);
MS_PIN_DECL(K18, GPIOS7, ROMA23, VPOR5);
-FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
- U19);
-FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
- A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19);
-FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20);
-FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22);
-
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
#define A12 152
@@ -827,6 +1207,50 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1TXD3, RGMII1);
MS_PIN_DECL_(A13, SIG_EXPR_LIST_PTR(GPIOT5), SIG_EXPR_LIST_PTR(DASHA13),
SIG_EXPR_LIST_PTR(RGMII1TXD3));
+#define RMII2_DESC SIG_DESC_BIT(HW_STRAP1, 7, 0)
+
+#define D9 158
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT6, GPIOT6, SIG_DESC_SET(SCUA0, 6));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXEN, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCK, RGMII2);
+MS_PIN_DECL_(D9, SIG_EXPR_LIST_PTR(GPIOT6), SIG_EXPR_LIST_PTR(RMII2TXEN),
+ SIG_EXPR_LIST_PTR(RGMII2TXCK));
+
+#define E9 159
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT7, GPIOT7, SIG_DESC_SET(SCUA0, 7));
+SIG_EXPR_LIST_DECL_SINGLE(DASHE9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCTL, RGMII2);
+MS_PIN_DECL_(E9, SIG_EXPR_LIST_PTR(GPIOT7), SIG_EXPR_LIST_PTR(DASHE9),
+ SIG_EXPR_LIST_PTR(RGMII2TXCTL));
+
+#define A10 160
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU0, GPIOU0, SIG_DESC_SET(SCUA0, 8));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD0, RGMII2);
+MS_PIN_DECL_(A10, SIG_EXPR_LIST_PTR(GPIOU0), SIG_EXPR_LIST_PTR(RMII2TXD0),
+ SIG_EXPR_LIST_PTR(RGMII2TXD0));
+
+#define B10 161
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU1, GPIOU1, SIG_DESC_SET(SCUA0, 9));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD1, RGMII2);
+MS_PIN_DECL_(B10, SIG_EXPR_LIST_PTR(GPIOU1), SIG_EXPR_LIST_PTR(RMII2TXD1),
+ SIG_EXPR_LIST_PTR(RGMII2TXD1));
+
+#define C10 162
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU2, GPIOU2, SIG_DESC_SET(SCUA0, 10));
+SIG_EXPR_LIST_DECL_SINGLE(DASHC10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD2, RGMII2);
+MS_PIN_DECL_(C10, SIG_EXPR_LIST_PTR(GPIOU2), SIG_EXPR_LIST_PTR(DASHC10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD2));
+
+#define D10 163
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU3, GPIOU3, SIG_DESC_SET(SCUA0, 11));
+SIG_EXPR_LIST_DECL_SINGLE(DASHD10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD3, RGMII2);
+MS_PIN_DECL_(D10, SIG_EXPR_LIST_PTR(GPIOU3), SIG_EXPR_LIST_PTR(DASHD10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD3));
+
#define E11 164
SIG_EXPR_LIST_DECL_SINGLE(GPIOU4, GPIOU4, SIG_DESC_SET(SCUA0, 12));
SIG_EXPR_LIST_DECL_SINGLE(RMII1RCLK, RMII1, RMII1_DESC);
@@ -869,11 +1293,419 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1RXD3, RGMII1);
MS_PIN_DECL_(E10, SIG_EXPR_LIST_PTR(GPIOV1), SIG_EXPR_LIST_PTR(RMII1RXER),
SIG_EXPR_LIST_PTR(RGMII1RXD3));
+#define C9 170
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV2, GPIOV2, SIG_DESC_SET(SCUA0, 18));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RCLK, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCK, RGMII2);
+MS_PIN_DECL_(C9, SIG_EXPR_LIST_PTR(GPIOV2), SIG_EXPR_LIST_PTR(RMII2RCLK),
+ SIG_EXPR_LIST_PTR(RGMII2RXCK));
+
+#define B9 171
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV3, GPIOV3, SIG_DESC_SET(SCUA0, 19));
+SIG_EXPR_LIST_DECL_SINGLE(DASHB9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCTL, RGMII2);
+MS_PIN_DECL_(B9, SIG_EXPR_LIST_PTR(GPIOV3), SIG_EXPR_LIST_PTR(DASHB9),
+ SIG_EXPR_LIST_PTR(RGMII2RXCTL));
+
+#define A9 172
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV4, GPIOV4, SIG_DESC_SET(SCUA0, 20));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD0, RGMII2);
+MS_PIN_DECL_(A9, SIG_EXPR_LIST_PTR(GPIOV4), SIG_EXPR_LIST_PTR(RMII2RXD0),
+ SIG_EXPR_LIST_PTR(RGMII2RXD0));
+
+#define E8 173
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV5, GPIOV5, SIG_DESC_SET(SCUA0, 21));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD1, RGMII2);
+MS_PIN_DECL_(E8, SIG_EXPR_LIST_PTR(GPIOV5), SIG_EXPR_LIST_PTR(RMII2RXD1),
+ SIG_EXPR_LIST_PTR(RGMII2RXD1));
+
+#define D8 174
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV6, GPIOV6, SIG_DESC_SET(SCUA0, 22));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2CRSDV, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD2, RGMII2);
+MS_PIN_DECL_(D8, SIG_EXPR_LIST_PTR(GPIOV6), SIG_EXPR_LIST_PTR(RMII2CRSDV),
+ SIG_EXPR_LIST_PTR(RGMII2RXD2));
+
+#define C8 175
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV7, GPIOV7, SIG_DESC_SET(SCUA0, 23));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXER, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD3, RGMII2);
+MS_PIN_DECL_(C8, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
+ SIG_EXPR_LIST_PTR(RGMII2RXD3));
+
FUNC_GROUP_DECL(RMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
+FUNC_GROUP_DECL(RMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+FUNC_GROUP_DECL(RGMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+
+#define L5 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(L5, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, L5);
+
+#define L4 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(L4, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, L4);
+
+#define L3 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(L3, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, L3);
+
+#define L2 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(L2, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, L2);
+
+#define L1 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(L1, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, L1);
+
+#define M5 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(M5, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, M5);
+
+#define M4 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(M4, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, M4);
+
+#define M3 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(M3, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, M3);
+
+#define M2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(M2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, M2);
+
+#define M1 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(M1, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, M1);
+
+#define N5 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(N5, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, N5);
+
+#define N4 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(N4, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, N4);
+
+#define N3 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(N3, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, N3);
+
+#define N2 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(N2, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, N2);
+
+#define N1 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(N1, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, N1);
+
+#define P5 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(P5, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, P5);
+
+#define C21 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SS_PIN_DECL(C21, GPIOY0, SIOS3);
+FUNC_GROUP_DECL(SIOS3, C21);
+
+#define F20 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SS_PIN_DECL(F20, GPIOY1, SIOS5);
+FUNC_GROUP_DECL(SIOS5, F20);
+
+#define G20 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SS_PIN_DECL(G20, GPIOY2, SIOPWREQ);
+FUNC_GROUP_DECL(SIOPWREQ, G20);
+
+#define K20 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SS_PIN_DECL(K20, GPIOY3, SIOONCTRL);
+FUNC_GROUP_DECL(SIOONCTRL, K20);
+
+FUNC_GROUP_DECL(ACPI, B19, A20, D17, A19, C21, F20, G20, K20);
+
+#define R22 200
+#define R22_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(ROMA2, ROM8, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA2, ROM16, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA2, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB0, VPO12, R22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB0, VPO24, R22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB0, VPOOFF1, R22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB0, SIG_EXPR_PTR(VPOB0, VPO12),
+ SIG_EXPR_PTR(VPOB0, VPO24), SIG_EXPR_PTR(VPOB0, VPOOFF1));
+MS_PIN_DECL(R22, GPIOZ0, ROMA2, VPOB0);
+
+#define P18 201
+#define P18_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(ROMA3, ROM8, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA3, ROM16, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA3, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB1, VPO12, P18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB1, VPO24, P18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB1, VPOOFF1, P18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB1, SIG_EXPR_PTR(VPOB1, VPO12),
+ SIG_EXPR_PTR(VPOB1, VPO24), SIG_EXPR_PTR(VPOB1, VPOOFF1));
+MS_PIN_DECL(P18, GPIOZ1, ROMA3, VPOB1);
+
+#define P19 202
+#define P19_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(ROMA4, ROM8, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA4, ROM16, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA4, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB2, VPO12, P19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB2, VPO24, P19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, P19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO12),
+ SIG_EXPR_PTR(VPOB2, VPO24), SIG_EXPR_PTR(VPOB2, VPOOFF1));
+MS_PIN_DECL(P19, GPIOZ2, ROMA4, VPOB2);
+
+#define P20 203
+#define P20_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(ROMA5, ROM8, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA5, ROM16, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA5, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB3, VPO12, P20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB3, VPO24, P20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, P20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO12),
+ SIG_EXPR_PTR(VPOB3, VPO24), SIG_EXPR_PTR(VPOB3, VPOOFF1));
+MS_PIN_DECL(P20, GPIOZ3, ROMA5, VPOB3);
+
+#define P21 204
+#define P21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(ROMA6, ROM8, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA6, ROM16, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA6, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB4, VPO12, P21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB4, VPO24, P21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, P21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO12),
+ SIG_EXPR_PTR(VPOB4, VPO24), SIG_EXPR_PTR(VPOB4, VPOOFF1));
+MS_PIN_DECL(P21, GPIOZ4, ROMA6, VPOB4);
+
+#define P22 205
+#define P22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(ROMA7, ROM8, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA7, ROM16, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA7, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB5, VPO12, P22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB5, VPO24, P22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO12),
+ SIG_EXPR_PTR(VPOB5, VPO24), SIG_EXPR_PTR(VPOB5, VPOOFF1));
+MS_PIN_DECL(P22, GPIOZ5, ROMA7, VPOB5);
+
+#define M19 206
+#define M19_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(ROMA8, ROM8, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA8, ROM16, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA8, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB6, VPO12, M19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB6, VPO24, M19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, M19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO12),
+ SIG_EXPR_PTR(VPOB6, VPO24), SIG_EXPR_PTR(VPOB6, VPOOFF1));
+MS_PIN_DECL(M19, GPIOZ6, ROMA8, VPOB6);
+
+#define M20 207
+#define M20_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(ROMA9, ROM8, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA9, ROM16, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA9, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB7, VPO12, M20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB7, VPO24, M20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, M20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO12),
+ SIG_EXPR_PTR(VPOB7, VPO24), SIG_EXPR_PTR(VPOB7, VPOOFF1));
+MS_PIN_DECL(M20, GPIOZ7, ROMA9, VPOB7);
+
+#define M21 208
+#define M21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(ROMA10, ROM8, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA10, ROM16, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA10, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG0, VPO12, M21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG0, VPO24, M21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG0, VPOOFF1, M21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG0, SIG_EXPR_PTR(VPOG0, VPO12),
+ SIG_EXPR_PTR(VPOG0, VPO24), SIG_EXPR_PTR(VPOG0, VPOOFF1));
+MS_PIN_DECL(M21, GPIOAA0, ROMA10, VPOG0);
+
+#define M22 209
+#define M22_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(ROMA11, ROM8, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA11, ROM16, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA11, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG1, VPO12, M22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG1, VPO24, M22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG1, VPOOFF1, M22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG1, SIG_EXPR_PTR(VPOG1, VPO12),
+ SIG_EXPR_PTR(VPOG1, VPO24), SIG_EXPR_PTR(VPOG1, VPOOFF1));
+MS_PIN_DECL(M22, GPIOAA1, ROMA11, VPOG1);
+
+#define L18 210
+#define L18_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(ROMA12, ROM8, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA12, ROM16, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA12, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG2, VPO12, L18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG2, VPO24, L18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, L18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO12),
+ SIG_EXPR_PTR(VPOG2, VPO24), SIG_EXPR_PTR(VPOG2, VPOOFF1));
+MS_PIN_DECL(L18, GPIOAA2, ROMA12, VPOG2);
+
+#define L19 211
+#define L19_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(ROMA13, ROM8, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA13, ROM16, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA13, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG3, VPO12, L19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG3, VPO24, L19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, L19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO12),
+ SIG_EXPR_PTR(VPOG3, VPO24), SIG_EXPR_PTR(VPOG3, VPOOFF1));
+MS_PIN_DECL(L19, GPIOAA3, ROMA13, VPOG3);
+
+#define L20 212
+#define L20_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(ROMA14, ROM8, L20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA14, ROM16, L20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA14, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG4, VPO24, L20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, L20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG4, VPO24, VPOOFF1);
+MS_PIN_DECL(L20, GPIOAA4, ROMA14, VPOG4);
+
+#define L21 213
+#define L21_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(ROMA15, ROM8, L21_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA15, ROM16, L21_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA15, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG5, VPO24, L21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, L21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG5, VPO24, VPOOFF1);
+MS_PIN_DECL(L21, GPIOAA5, ROMA15, VPOG5);
+
+#define T18 214
+#define T18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(ROMA16, ROM8, T18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA16, ROM16, T18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA16, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG6, VPO24, T18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, T18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG6, VPO24, VPOOFF1);
+MS_PIN_DECL(T18, GPIOAA6, ROMA16, VPOG6);
+
+#define N18 215
+#define N18_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(ROMA17, ROM8, N18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA17, ROM16, N18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA17, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG7, VPO24, N18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, N18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG7, VPO24, VPOOFF1);
+MS_PIN_DECL(N18, GPIOAA7, ROMA17, VPOG7);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(ROMA18, ROM8, N19_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA18, ROM16, N19_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA18, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR0, VPO24, N19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR0, VPOOFF1, N19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR0, VPO24, VPOOFF1);
+MS_PIN_DECL(N19, GPIOAB0, ROMA18, VPOR0);
+
+#define M18 217
+#define M18_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(ROMA19, ROM8, M18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA19, ROM16, M18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA19, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR1, VPO24, M18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR1, VPOOFF1, M18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR1, VPO24, VPOOFF1);
+MS_PIN_DECL(M18, GPIOAB1, ROMA19, VPOR1);
+
+#define N22 218
+#define N22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(ROMA20, ROM8, N22_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA20, ROM16, N22_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA20, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR2, VPO24, N22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, N22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR2, VPO24, VPOOFF1);
+MS_PIN_DECL(N22, GPIOAB2, ROMA20, VPOR2);
+
+#define N20 219
+#define N20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(ROMA21, ROM8, N20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA21, ROM16, N20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA21, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR3, VPO24, N20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, N20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR3, VPO24, VPOOFF1);
+MS_PIN_DECL(N20, GPIOAB3, ROMA21, VPOR3);
+
+FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
+ U19, R22, P18, P19, P20, P21, P22, M19, M20, M21, M22, L18,
+ L19, L20, L21, T18, N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
+ A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19, L20, L21, T18,
+ N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20, R22, P18, P19, P20, P21, P22, M19,
+ M20, M21, M22, L18, L19, L20, L21, T18, N18, N19, M18, N22,
+ N20);
+FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19);
+
/* Note we account for GPIOY4-GPIOY7 even though they're not valid, thus 216
* pins becomes 220.
*/
@@ -883,84 +1715,180 @@ FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(A1),
+ ASPEED_PINCTRL_PIN(A10),
ASPEED_PINCTRL_PIN(A11),
ASPEED_PINCTRL_PIN(A12),
ASPEED_PINCTRL_PIN(A13),
+ ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A6),
ASPEED_PINCTRL_PIN(A7),
ASPEED_PINCTRL_PIN(A8),
+ ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
ASPEED_PINCTRL_PIN(AA2),
ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AA6),
ASPEED_PINCTRL_PIN(AA7),
ASPEED_PINCTRL_PIN(AB1),
ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
+ ASPEED_PINCTRL_PIN(AB6),
ASPEED_PINCTRL_PIN(AB7),
ASPEED_PINCTRL_PIN(B1),
+ ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
ASPEED_PINCTRL_PIN(B12),
+ ASPEED_PINCTRL_PIN(B13),
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
+ ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
+ ASPEED_PINCTRL_PIN(B5),
ASPEED_PINCTRL_PIN(B6),
ASPEED_PINCTRL_PIN(B7),
+ ASPEED_PINCTRL_PIN(B9),
ASPEED_PINCTRL_PIN(C1),
+ ASPEED_PINCTRL_PIN(C10),
ASPEED_PINCTRL_PIN(C11),
ASPEED_PINCTRL_PIN(C12),
+ ASPEED_PINCTRL_PIN(C13),
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
+ ASPEED_PINCTRL_PIN(C16),
ASPEED_PINCTRL_PIN(C17),
+ ASPEED_PINCTRL_PIN(C18),
ASPEED_PINCTRL_PIN(C2),
+ ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(C6),
ASPEED_PINCTRL_PIN(C7),
+ ASPEED_PINCTRL_PIN(C8),
+ ASPEED_PINCTRL_PIN(C9),
ASPEED_PINCTRL_PIN(D1),
+ ASPEED_PINCTRL_PIN(D10),
ASPEED_PINCTRL_PIN(D11),
ASPEED_PINCTRL_PIN(D12),
+ ASPEED_PINCTRL_PIN(D13),
ASPEED_PINCTRL_PIN(D14),
ASPEED_PINCTRL_PIN(D15),
ASPEED_PINCTRL_PIN(D16),
ASPEED_PINCTRL_PIN(D17),
ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D3),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
+ ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
+ ASPEED_PINCTRL_PIN(D8),
+ ASPEED_PINCTRL_PIN(D9),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E11),
ASPEED_PINCTRL_PIN(E12),
+ ASPEED_PINCTRL_PIN(E13),
ASPEED_PINCTRL_PIN(E14),
+ ASPEED_PINCTRL_PIN(E15),
ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E5),
+ ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
+ ASPEED_PINCTRL_PIN(E8),
+ ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F18),
+ ASPEED_PINCTRL_PIN(F20),
ASPEED_PINCTRL_PIN(F3),
ASPEED_PINCTRL_PIN(F4),
ASPEED_PINCTRL_PIN(F5),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G19),
+ ASPEED_PINCTRL_PIN(G20),
ASPEED_PINCTRL_PIN(G5),
ASPEED_PINCTRL_PIN(H1),
+ ASPEED_PINCTRL_PIN(H18),
ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H2),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(J21),
ASPEED_PINCTRL_PIN(J3),
+ ASPEED_PINCTRL_PIN(J4),
+ ASPEED_PINCTRL_PIN(J5),
ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K20),
+ ASPEED_PINCTRL_PIN(K5),
+ ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
+ ASPEED_PINCTRL_PIN(L2),
+ ASPEED_PINCTRL_PIN(L20),
+ ASPEED_PINCTRL_PIN(L21),
ASPEED_PINCTRL_PIN(L22),
+ ASPEED_PINCTRL_PIN(L3),
+ ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(L5),
+ ASPEED_PINCTRL_PIN(M1),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M2),
+ ASPEED_PINCTRL_PIN(M20),
+ ASPEED_PINCTRL_PIN(M21),
+ ASPEED_PINCTRL_PIN(M22),
+ ASPEED_PINCTRL_PIN(M3),
+ ASPEED_PINCTRL_PIN(M4),
+ ASPEED_PINCTRL_PIN(M5),
+ ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
+ ASPEED_PINCTRL_PIN(N2),
+ ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
+ ASPEED_PINCTRL_PIN(N22),
+ ASPEED_PINCTRL_PIN(N3),
+ ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R22),
ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T18),
ASPEED_PINCTRL_PIN(T19),
ASPEED_PINCTRL_PIN(T2),
ASPEED_PINCTRL_PIN(T4),
@@ -979,28 +1907,61 @@ static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(V20),
ASPEED_PINCTRL_PIN(V21),
ASPEED_PINCTRL_PIN(V22),
+ ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(V7),
ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W2),
ASPEED_PINCTRL_PIN(W21),
ASPEED_PINCTRL_PIN(W22),
+ ASPEED_PINCTRL_PIN(W3),
ASPEED_PINCTRL_PIN(W4),
ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(W7),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y21),
ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
ASPEED_PINCTRL_PIN(Y4),
ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
ASPEED_PINCTRL_PIN(Y7),
};
static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
ASPEED_PINCTRL_GROUP(BMCINT),
ASPEED_PINCTRL_GROUP(DDCCLK),
ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(EXTRST),
ASPEED_PINCTRL_GROUP(FLACK),
ASPEED_PINCTRL_GROUP(FLBUSY),
ASPEED_PINCTRL_GROUP(FLWP),
+ ASPEED_PINCTRL_GROUP(GPID),
ASPEED_PINCTRL_GROUP(GPID0),
+ ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
ASPEED_PINCTRL_GROUP(GPIE2),
ASPEED_PINCTRL_GROUP(GPIE4),
@@ -1009,6 +1970,7 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
ASPEED_PINCTRL_GROUP(I2C13),
+ ASPEED_PINCTRL_GROUP(I2C14),
ASPEED_PINCTRL_GROUP(I2C3),
ASPEED_PINCTRL_GROUP(I2C4),
ASPEED_PINCTRL_GROUP(I2C5),
@@ -1018,25 +1980,37 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C9),
ASPEED_PINCTRL_GROUP(LPCPD),
ASPEED_PINCTRL_GROUP(LPCPME),
- ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
ASPEED_PINCTRL_GROUP(NCTS3),
ASPEED_PINCTRL_GROUP(NCTS4),
ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
ASPEED_PINCTRL_GROUP(NDCD3),
ASPEED_PINCTRL_GROUP(NDCD4),
ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NDTS4),
ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
ASPEED_PINCTRL_GROUP(NRI3),
ASPEED_PINCTRL_GROUP(NRI4),
ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -1046,7 +2020,9 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(PWM6),
ASPEED_PINCTRL_GROUP(PWM7),
ASPEED_PINCTRL_GROUP(RGMII1),
+ ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
+ ASPEED_PINCTRL_GROUP(RMII2),
ASPEED_PINCTRL_GROUP(ROM16),
ASPEED_PINCTRL_GROUP(ROM8),
ASPEED_PINCTRL_GROUP(ROMCS1),
@@ -1054,21 +2030,48 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ROMCS3),
ASPEED_PINCTRL_GROUP(ROMCS4),
ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
ASPEED_PINCTRL_GROUP(RXD3),
ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SGPMCK),
ASPEED_PINCTRL_GROUP(SGPMI),
+ ASPEED_PINCTRL_GROUP(SGPMLD),
+ ASPEED_PINCTRL_GROUP(SGPMO),
+ ASPEED_PINCTRL_GROUP(SGPSCK),
+ ASPEED_PINCTRL_GROUP(SGPSI0),
+ ASPEED_PINCTRL_GROUP(SGPSI1),
+ ASPEED_PINCTRL_GROUP(SGPSLD),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
ASPEED_PINCTRL_GROUP(SIOPBI),
ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
+ ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1DEBUG),
+ ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPICS1),
ASPEED_PINCTRL_GROUP(TIMER3),
+ ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
ASPEED_PINCTRL_GROUP(TXD3),
ASPEED_PINCTRL_GROUP(TXD4),
ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
+ ASPEED_PINCTRL_GROUP(VGABIOS_ROM),
ASPEED_PINCTRL_GROUP(VGAHS),
ASPEED_PINCTRL_GROUP(VGAVS),
ASPEED_PINCTRL_GROUP(VPI18),
@@ -1076,17 +2079,40 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(VPI30),
ASPEED_PINCTRL_GROUP(VPO12),
ASPEED_PINCTRL_GROUP(VPO24),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
ASPEED_PINCTRL_FUNC(BMCINT),
ASPEED_PINCTRL_FUNC(DDCCLK),
ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(EXTRST),
ASPEED_PINCTRL_FUNC(FLACK),
ASPEED_PINCTRL_FUNC(FLBUSY),
ASPEED_PINCTRL_FUNC(FLWP),
+ ASPEED_PINCTRL_FUNC(GPID),
ASPEED_PINCTRL_FUNC(GPID0),
+ ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
ASPEED_PINCTRL_FUNC(GPIE2),
ASPEED_PINCTRL_FUNC(GPIE4),
@@ -1095,6 +2121,7 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
ASPEED_PINCTRL_FUNC(I2C13),
+ ASPEED_PINCTRL_FUNC(I2C14),
ASPEED_PINCTRL_FUNC(I2C3),
ASPEED_PINCTRL_FUNC(I2C4),
ASPEED_PINCTRL_FUNC(I2C5),
@@ -1104,24 +2131,37 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C9),
ASPEED_PINCTRL_FUNC(LPCPD),
ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
ASPEED_PINCTRL_FUNC(NCTS3),
ASPEED_PINCTRL_FUNC(NCTS4),
ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
ASPEED_PINCTRL_FUNC(NDCD3),
ASPEED_PINCTRL_FUNC(NDCD4),
ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NDTS4),
ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
ASPEED_PINCTRL_FUNC(NRI3),
ASPEED_PINCTRL_FUNC(NRI4),
ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -1131,7 +2171,9 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(PWM6),
ASPEED_PINCTRL_FUNC(PWM7),
ASPEED_PINCTRL_FUNC(RGMII1),
+ ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
+ ASPEED_PINCTRL_FUNC(RMII2),
ASPEED_PINCTRL_FUNC(ROM16),
ASPEED_PINCTRL_FUNC(ROM8),
ASPEED_PINCTRL_FUNC(ROMCS1),
@@ -1139,21 +2181,48 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ROMCS3),
ASPEED_PINCTRL_FUNC(ROMCS4),
ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
ASPEED_PINCTRL_FUNC(RXD3),
ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SGPMCK),
ASPEED_PINCTRL_FUNC(SGPMI),
+ ASPEED_PINCTRL_FUNC(SGPMLD),
+ ASPEED_PINCTRL_FUNC(SGPMO),
+ ASPEED_PINCTRL_FUNC(SGPSCK),
+ ASPEED_PINCTRL_FUNC(SGPSI0),
+ ASPEED_PINCTRL_FUNC(SGPSI1),
+ ASPEED_PINCTRL_FUNC(SGPSLD),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
ASPEED_PINCTRL_FUNC(SIOPBI),
ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
+ ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1DEBUG),
+ ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPICS1),
ASPEED_PINCTRL_FUNC(TIMER3),
+ ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
ASPEED_PINCTRL_FUNC(TXD3),
ASPEED_PINCTRL_FUNC(TXD4),
ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
+ ASPEED_PINCTRL_FUNC(VGABIOS_ROM),
ASPEED_PINCTRL_FUNC(VGAHS),
ASPEED_PINCTRL_FUNC(VGAVS),
ASPEED_PINCTRL_FUNC(VPI18),
@@ -1161,6 +2230,8 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(VPI30),
ASPEED_PINCTRL_FUNC(VPO12),
ASPEED_PINCTRL_FUNC(VPO24),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g4_pinctrl_data = {
--
2.9.3
^ permalink raw reply related
* [PATCH v4 2/5] pinctrl: aspeed: Read and write bits in LPC and GFX controllers
From: Andrew Jeffery @ 2016-12-20 7:35 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, linux-gpio, devicetree, linux-kernel
In-Reply-To: <20161220073551.28522-1-andrew@aj.id.au>
The System Control Unit IP block in the Aspeed SoCs is typically where
the pinmux configuration is found, but not always. A number of pins
depend on state in one of LPC Host Control (LHC) or SoC Display
Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the
means to adjust these as necessary.
We use syscon to cast a regmap over the GFX and LPC blocks, which is
used as an arbitration layer between the relevant driver and the pinctrl
subsystem. The regmaps are then exposed to the SoC-specific pinctrl
drivers by phandles in the devicetree, and are selected during a mux
request by querying a new 'ip' member in struct aspeed_sig_desc.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
Joel: I kept your r-b tag here despite reworking the g5 example bindings, as
you've given your r-b for the lpc bindings which are what I have added.
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 80 ++++++++--
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 18 +--
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 48 ++++--
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 161 +++++++++++++--------
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 32 ++--
5 files changed, 242 insertions(+), 97 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index b2efb73337c6..fb7694ec033d 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -1,15 +1,23 @@
+======================
Aspeed Pin Controllers
-----------------------
+======================
The Aspeed SoCs vary in functionality inside a generation but have a common mux
device register layout.
-Required properties:
-- compatible : Should be any one of the following:
- "aspeed,ast2400-pinctrl"
- "aspeed,g4-pinctrl"
- "aspeed,ast2500-pinctrl"
- "aspeed,g5-pinctrl"
+Required properties for g4:
+- compatible : Should be one of the following:
+ "aspeed,ast2400-pinctrl"
+ "aspeed,g4-pinctrl"
+
+Required properties for g5:
+- compatible : Should be one of the following:
+ "aspeed,ast2500-pinctrl"
+ "aspeed,g5-pinctrl"
+
+- aspeed,external-nodes: A cell of phandles to external controller nodes:
+ 0: compatible with "aspeed,ast2500-gfx", "syscon"
+ 1: compatible with "aspeed,ast2500-lhc", "syscon"
The pin controller node should be the child of a syscon node with the required
property:
@@ -24,7 +32,7 @@ Refer to the the bindings described in
Documentation/devicetree/bindings/mfd/syscon.txt
Subnode Format
---------------
+==============
The required properties of child nodes are (as defined in pinctrl-bindings):
- function
@@ -51,8 +59,11 @@ I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
TIMER7 TIMER8 VGABIOSROM
+Examples
+========
-Examples:
+g4 Example
+----------
syscon: scu@1e6e2000 {
compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
@@ -68,5 +79,56 @@ syscon: scu@1e6e2000 {
};
};
+g5 Example
+----------
+
+ahb {
+ apb {
+ syscon: scu@1e6e2000 {
+ compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,g5-pinctrl";
+ aspeed,external-nodes = <&gfx &lhc>;
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+ };
+ };
+
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ };
+ };
+
+ lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2500-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e789000 0x1000>;
+
+ lpc_host: lpc-host@80 {
+ compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
+ reg-io-width = <4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80 0x1e0>;
+
+ lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
+ };
+ };
+ };
+};
+
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices.
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index a21b071ff290..558bd102416c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -292,7 +292,7 @@ SSSF_PIN_DECL(U18, GPIOG7, FLWP, SIG_DESC_SET(SCU84, 7));
#define UART6_DESC SIG_DESC_SET(SCU90, 7)
#define ROM16_DESC SIG_DESC_SET(SCU90, 6)
#define FLASH_WIDE SIG_DESC_SET(HW_STRAP1, 4)
-#define BOOT_SRC_NOR { HW_STRAP1, GENMASK(1, 0), 0, 0 }
+#define BOOT_SRC_NOR { ASPEED_IP_SCU, HW_STRAP1, GENMASK(1, 0), 0, 0 }
#define A8 56
SIG_EXPR_DECL(ROMD8, ROM16, ROM16_DESC);
@@ -418,9 +418,9 @@ FUNC_GROUP_DECL(I2C8, G5, F3);
#define U1 88
SSSF_PIN_DECL(U1, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
-#define VPI18_DESC { SCU90, GENMASK(5, 4), 1, 0 }
-#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
-#define VPI30_DESC { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPI18_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
+#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
+#define VPI30_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
#define T5 89
#define T5_DESC SIG_DESC_SET(SCU84, 17)
@@ -641,11 +641,11 @@ SSSF_PIN_DECL(Y22, GPIOR2, ROMCS3, SIG_DESC_SET(SCU88, 26));
#define U19 139
SSSF_PIN_DECL(U19, GPIOR3, ROMCS4, SIG_DESC_SET(SCU88, 27));
-#define VPOOFF0_DESC { SCU94, GENMASK(1, 0), 0, 0 }
-#define VPO12_DESC { SCU94, GENMASK(1, 0), 1, 0 }
-#define VPO24_DESC { SCU94, GENMASK(1, 0), 2, 0 }
-#define VPOOFF1_DESC { SCU94, GENMASK(1, 0), 3, 0 }
-#define VPO_OFF_12 { SCU94, 0x2, 0, 0 }
+#define VPOOFF0_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
+#define VPO12_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 1, 0 }
+#define VPO24_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 2, 0 }
+#define VPOOFF1_DESC { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 3, 0 }
+#define VPO_OFF_12 { ASPEED_IP_SCU, SCU94, 0x2, 0, 0 }
#define VPO_24_OFF SIG_DESC_SET(SCU94, 1)
#define V21 140
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 87b46390b695..c5c9a1b6fa1c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -26,8 +27,8 @@
#define ASPEED_G5_NR_PINS 228
-#define COND1 { SCU90, BIT(6), 0, 0 }
-#define COND2 { SCU94, GENMASK(1, 0), 0, 0 }
+#define COND1 { ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
+#define COND2 { ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
#define B14 0
SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
@@ -186,9 +187,12 @@ MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
FUNC_GROUP_DECL(GPIE0, B20, C20);
-#define SPI1_DESC { HW_STRAP1, GENMASK(13, 12), 1, 0 }
-#define SPI1DEBUG_DESC { HW_STRAP1, GENMASK(13, 12), 2, 0 }
-#define SPI1PASSTHRU_DESC { HW_STRAP1, GENMASK(13, 12), 3, 0 }
+#define SPI1_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC \
+ { ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
#define C18 64
SIG_EXPR_DECL(SYSCS, SPI1DEBUG, COND1, SPI1DEBUG_DESC);
@@ -325,10 +329,11 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
FUNC_GROUP_DECL(I2C8, P2, R1);
-#define VPIOFF0_DESC { SCU90, GENMASK(5, 4), 0, 0 }
-#define VPIOFF1_DESC { SCU90, GENMASK(5, 4), 1, 0 }
-#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
-#define VPIRSVD_DESC { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPIOFF0_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
+#define VPIOFF1_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
+#define VPI24_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
+#define VPIRSVD_DESC { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
+
#define V2 104
#define V2_DESC SIG_DESC_SET(SCU88, 0)
@@ -848,10 +853,35 @@ static struct pinctrl_desc aspeed_g5_pinctrl_desc = {
static int aspeed_g5_pinctrl_probe(struct platform_device *pdev)
{
int i;
+ struct regmap *map;
+ struct device_node *node;
for (i = 0; i < ARRAY_SIZE(aspeed_g5_pins); i++)
aspeed_g5_pins[i].number = i;
+ node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 0);
+ map = syscon_node_to_regmap(node);
+ of_node_put(node);
+ if (IS_ERR(map)) {
+ dev_warn(&pdev->dev, "No GFX phandle found, some mux configurations may fail\n");
+ map = NULL;
+ }
+ aspeed_g5_pinctrl_data.maps[ASPEED_IP_GFX] = map;
+
+ node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 1);
+ if (node) {
+ map = syscon_node_to_regmap(node->parent);
+ if (IS_ERR(map)) {
+ dev_warn(&pdev->dev, "LHC parent is not a syscon, some mux configurations may fail\n");
+ map = NULL;
+ }
+ } else {
+ dev_warn(&pdev->dev, "No LHC phandle found, some mux configurations may fail\n");
+ map = NULL;
+ }
+ of_node_put(node);
+ aspeed_g5_pinctrl_data.maps[ASPEED_IP_LPC] = map;
+
return aspeed_pinctrl_probe(pdev, &aspeed_g5_pinctrl_desc,
&aspeed_g5_pinctrl_data);
}
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 49aeba912531..782c5c97f853 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -14,6 +14,12 @@
#include "../core.h"
#include "pinctrl-aspeed.h"
+static const char *const aspeed_pinmux_ips[] = {
+ [ASPEED_IP_SCU] = "SCU",
+ [ASPEED_IP_GFX] = "GFX",
+ [ASPEED_IP_LPC] = "LPC",
+};
+
int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -78,7 +84,8 @@ int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
static inline void aspeed_sig_desc_print_val(
const struct aspeed_sig_desc *desc, bool enable, u32 rv)
{
- pr_debug("SCU%x[0x%08x]=0x%x, got 0x%x from 0x%08x\n", desc->reg,
+ pr_debug("Want %s%X[0x%08X]=0x%X, got 0x%X from 0x%08X\n",
+ aspeed_pinmux_ips[desc->ip], desc->reg,
desc->mask, enable ? desc->enable : desc->disable,
(rv & desc->mask) >> __ffs(desc->mask), rv);
}
@@ -88,10 +95,11 @@ static inline void aspeed_sig_desc_print_val(
*
* @desc: The signal descriptor of interest
* @enabled: True to query the enabled state, false to query disabled state
- * @regmap: The SCU regmap instance
+ * @regmap: The IP block's regmap instance
*
- * @return True if the descriptor's bitfield is configured to the state
- * selected by @enabled, false otherwise
+ * @return 1 if the descriptor's bitfield is configured to the state
+ * selected by @enabled, 0 if not, and less than zero if an unrecoverable
+ * failure occurred
*
* Evaluation of descriptor state is non-trivial in that it is not a binary
* outcome: The bitfields can be greater than one bit in size and thus can take
@@ -99,14 +107,19 @@ static inline void aspeed_sig_desc_print_val(
* descriptor (typically this means a different function to the one of interest
* is enabled). Thus we must explicitly test for either condition as required.
*/
-static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
+static int aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
bool enabled, struct regmap *map)
{
+ int ret;
unsigned int raw;
u32 want;
- if (regmap_read(map, desc->reg, &raw) < 0)
- return false;
+ if (!map)
+ return -ENODEV;
+
+ ret = regmap_read(map, desc->reg, &raw);
+ if (ret)
+ return ret;
aspeed_sig_desc_print_val(desc, enabled, raw);
want = enabled ? desc->enable : desc->disable;
@@ -119,10 +132,10 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
*
* @expr: An expression controlling the signal for a mux function on a pin
* @enabled: True to query the enabled state, false to query disabled state
- * @regmap: The SCU regmap instance
+ * @maps: The list of regmap instances
*
- * @return True if the expression composed by @enabled evaluates true, false
- * otherwise
+ * @return 1 if the expression composed by @enabled evaluates true, 0 if not,
+ * and less than zero if an unrecoverable failure occurred.
*
* A mux function is enabled or disabled if the function's signal expression
* for each pin in the function's pin group evaluates true for the desired
@@ -135,19 +148,21 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
* neither the enabled nor disabled state. Thus we must explicitly test for
* either condition as required.
*/
-static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
- bool enabled, struct regmap *map)
+static int aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
+ bool enabled, struct regmap * const *maps)
{
int i;
+ int ret;
for (i = 0; i < expr->ndescs; i++) {
const struct aspeed_sig_desc *desc = &expr->descs[i];
- if (!aspeed_sig_desc_eval(desc, enabled, map))
- return false;
+ ret = aspeed_sig_desc_eval(desc, enabled, maps[desc->ip]);
+ if (ret <= 0)
+ return ret;
}
- return true;
+ return 1;
}
/**
@@ -158,19 +173,24 @@ static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
* configured
* @enable: true to enable an function's signal through a pin's signal
* expression, false to disable the function's signal
- * @map: The SCU's regmap instance for pinmux register access.
+ * @maps: The list of regmap instances for pinmux register access.
*
- * @return true if the expression is configured as requested, false otherwise
+ * @return 0 if the expression is configured as requested and a negative error
+ * code otherwise
*/
-static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
- bool enable, struct regmap *map)
+static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
+ bool enable, struct regmap * const *maps)
{
+ int ret;
int i;
for (i = 0; i < expr->ndescs; i++) {
- bool ret;
const struct aspeed_sig_desc *desc = &expr->descs[i];
u32 pattern = enable ? desc->enable : desc->disable;
+ u32 val = (pattern << __ffs(desc->mask));
+
+ if (!maps[desc->ip])
+ return -ENODEV;
/*
* Strap registers are configured in hardware or by early-boot
@@ -179,64 +199,79 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
* deconfigured and is the reason we re-evaluate after writing
* all descriptor bits.
*/
- if (desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2)
+ if ((desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2) &&
+ desc->ip == ASPEED_IP_SCU)
continue;
- ret = regmap_update_bits(map, desc->reg, desc->mask,
- pattern << __ffs(desc->mask)) == 0;
+ ret = regmap_update_bits(maps[desc->ip], desc->reg,
+ desc->mask, val);
- if (!ret)
+ if (ret)
return ret;
}
- return aspeed_sig_expr_eval(expr, enable, map);
+ ret = aspeed_sig_expr_eval(expr, enable, maps);
+ if (ret < 0)
+ return ret;
+
+ if (!ret)
+ return -EPERM;
+
+ return 0;
}
-static bool aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
- struct regmap *map)
+static int aspeed_sig_expr_enable(const struct aspeed_sig_expr *expr,
+ struct regmap * const *maps)
{
- if (aspeed_sig_expr_eval(expr, true, map))
- return true;
+ int ret;
+
+ ret = aspeed_sig_expr_eval(expr, true, maps);
+ if (ret < 0)
+ return ret;
- return aspeed_sig_expr_set(expr, true, map);
+ if (!ret)
+ return aspeed_sig_expr_set(expr, true, maps);
+
+ return 0;
}
-static bool aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
- struct regmap *map)
+static int aspeed_sig_expr_disable(const struct aspeed_sig_expr *expr,
+ struct regmap * const *maps)
{
- if (!aspeed_sig_expr_eval(expr, true, map))
- return true;
+ int ret;
+
+ ret = aspeed_sig_expr_eval(expr, true, maps);
+ if (ret < 0)
+ return ret;
+
+ if (ret)
+ return aspeed_sig_expr_set(expr, false, maps);
- return aspeed_sig_expr_set(expr, false, map);
+ return 0;
}
/**
* Disable a signal on a pin by disabling all provided signal expressions.
*
* @exprs: The list of signal expressions (from a priority level on a pin)
- * @map: The SCU's regmap instance for pinmux register access.
+ * @maps: The list of regmap instances for pinmux register access.
*
- * @return true if all expressions in the list are successfully disabled, false
- * otherwise
+ * @return 0 if all expressions are disabled, otherwise a negative error code
*/
-static bool aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
- struct regmap *map)
+static int aspeed_disable_sig(const struct aspeed_sig_expr **exprs,
+ struct regmap * const *maps)
{
- bool disabled = true;
+ int ret = 0;
if (!exprs)
return true;
- while (*exprs) {
- bool ret;
-
- ret = aspeed_sig_expr_disable(*exprs, map);
- disabled = disabled && ret;
-
+ while (*exprs && !ret) {
+ ret = aspeed_sig_expr_disable(*exprs, maps);
exprs++;
}
- return disabled;
+ return ret;
}
/**
@@ -330,6 +365,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
unsigned int group)
{
int i;
+ int ret;
const struct aspeed_pinctrl_data *pdata =
pinctrl_dev_get_drvdata(pctldev);
const struct aspeed_pin_group *pgroup = &pdata->groups[group];
@@ -343,6 +379,8 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
const struct aspeed_sig_expr **funcs;
const struct aspeed_sig_expr ***prios;
+ pr_debug("Muxing pin %d for %s\n", pin, pfunc->name);
+
if (!pdesc)
return -EINVAL;
@@ -358,8 +396,9 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
if (expr)
break;
- if (!aspeed_disable_sig(funcs, pdata->map))
- return -EPERM;
+ ret = aspeed_disable_sig(funcs, pdata->maps);
+ if (ret)
+ return ret;
prios++;
}
@@ -377,8 +416,9 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
return -ENXIO;
}
- if (!aspeed_sig_expr_enable(expr, pdata->map))
- return -EPERM;
+ ret = aspeed_sig_expr_enable(expr, pdata->maps);
+ if (ret)
+ return ret;
}
return 0;
@@ -414,6 +454,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
+ int ret;
const struct aspeed_pinctrl_data *pdata =
pinctrl_dev_get_drvdata(pctldev);
const struct aspeed_pin_desc *pdesc = pdata->pins[offset].drv_data;
@@ -432,8 +473,9 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
if (aspeed_gpio_in_exprs(funcs))
break;
- if (!aspeed_disable_sig(funcs, pdata->map))
- return -EPERM;
+ ret = aspeed_disable_sig(funcs, pdata->maps);
+ if (ret)
+ return ret;
prios++;
}
@@ -462,10 +504,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
* If GPIO is not the lowest priority signal type, assume there is only
* one expression defined to enable the GPIO function
*/
- if (!aspeed_sig_expr_enable(expr, pdata->map))
- return -EPERM;
-
- return 0;
+ return aspeed_sig_expr_enable(expr, pdata->maps);
}
int aspeed_pinctrl_probe(struct platform_device *pdev,
@@ -481,10 +520,10 @@ int aspeed_pinctrl_probe(struct platform_device *pdev,
return -ENODEV;
}
- pdata->map = syscon_node_to_regmap(parent->of_node);
- if (IS_ERR(pdata->map)) {
+ pdata->maps[ASPEED_IP_SCU] = syscon_node_to_regmap(parent->of_node);
+ if (IS_ERR(pdata->maps[ASPEED_IP_SCU])) {
dev_err(&pdev->dev, "No regmap for syscon pincontroller parent\n");
- return PTR_ERR(pdata->map);
+ return PTR_ERR(pdata->maps[ASPEED_IP_SCU]);
}
pctl = pinctrl_register(pdesc, &pdev->dev, pdata);
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 3e72ef8c54bf..0e93cbf2ff33 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -232,6 +232,11 @@
* group.
*/
+#define ASPEED_IP_SCU 0
+#define ASPEED_IP_GFX 1
+#define ASPEED_IP_LPC 2
+#define ASPEED_NR_PINMUX_IPS 3
+
/*
* The "Multi-function Pins Mapping and Control" table in the SoC datasheet
* references registers by the device/offset mnemonic. The register macros
@@ -261,7 +266,9 @@
* A signal descriptor, which describes the register, bits and the
* enable/disable values that should be compared or written.
*
- * @reg: The register offset from base in bytes
+ * @ip: The IP block identifier, used as an index into the regmap array in
+ * struct aspeed_pinctrl_data
+ * @reg: The register offset with respect to the base address of the IP block
* @mask: The mask to apply to the register. The lowest set bit of the mask is
* used to derive the shift value.
* @enable: The value that enables the function. Value should be in the LSBs,
@@ -270,6 +277,7 @@
* LSBs, not at the position of the mask.
*/
struct aspeed_sig_desc {
+ unsigned int ip;
unsigned int reg;
u32 mask;
u32 enable;
@@ -313,24 +321,30 @@ struct aspeed_pin_desc {
/* Macro hell */
+#define SIG_DESC_IP_BIT(ip, reg, idx, val) \
+ { ip, reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
+
/**
- * Short-hand macro for describing a configuration enabled by the state of one
- * bit. The disable value is derived.
+ * Short-hand macro for describing an SCU descriptor enabled by the state of
+ * one bit. The disable value is derived.
*
* @reg: The signal's associated register, offset from base
* @idx: The signal's bit index in the register
* @val: The value (0 or 1) that enables the function
*/
#define SIG_DESC_BIT(reg, idx, val) \
- { reg, BIT_MASK(idx), val, (((val) + 1) & 1) }
+ SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, val)
+
+#define SIG_DESC_IP_SET(ip, reg, idx) SIG_DESC_IP_BIT(ip, reg, idx, 1)
/**
- * A further short-hand macro describing a configuration enabled with a set bit.
+ * A further short-hand macro expanding to an SCU descriptor enabled by a set
+ * bit.
*
- * @reg: The configuration's associated register, offset from base
- * @idx: The configuration's bit index in the register
+ * @reg: The register, offset from base
+ * @idx: The bit index in the register
*/
-#define SIG_DESC_SET(reg, idx) SIG_DESC_BIT(reg, idx, 1)
+#define SIG_DESC_SET(reg, idx) SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, 1)
#define SIG_DESC_LIST_SYM(sig, func) sig_descs_ ## sig ## _ ## func
#define SIG_DESC_LIST_DECL(sig, func, ...) \
@@ -500,7 +514,7 @@ struct aspeed_pin_desc {
MS_PIN_DECL_(pin, SIG_EXPR_LIST_PTR(gpio))
struct aspeed_pinctrl_data {
- struct regmap *map;
+ struct regmap *maps[ASPEED_NR_PINMUX_IPS];
const struct pinctrl_pin_desc *pins;
const unsigned int npins;
--
2.9.3
^ permalink raw reply related
* [PATCH v4 1/5] pinctrl: aspeed: dt: Fix compatibles for the System Control Unit
From: Andrew Jeffery @ 2016-12-20 7:35 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, linux-gpio, devicetree, linux-kernel
In-Reply-To: <20161220073551.28522-1-andrew@aj.id.au>
Reference the SoC-specific compatible string in the examples as
required.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 2ad18c4ea55c..b2efb73337c6 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -11,9 +11,14 @@ Required properties:
"aspeed,ast2500-pinctrl"
"aspeed,g5-pinctrl"
-The pin controller node should be a child of a syscon node with the required
+The pin controller node should be the child of a syscon node with the required
property:
-- compatible: "syscon", "simple-mfd"
+
+- compatible : Should be one of the following:
+ "aspeed,ast2400-scu", "syscon", "simple-mfd"
+ "aspeed,g4-scu", "syscon", "simple-mfd"
+ "aspeed,ast2500-scu", "syscon", "simple-mfd"
+ "aspeed,g5-scu", "syscon", "simple-mfd"
Refer to the the bindings described in
Documentation/devicetree/bindings/mfd/syscon.txt
@@ -50,7 +55,7 @@ TIMER7 TIMER8 VGABIOSROM
Examples:
syscon: scu@1e6e2000 {
- compatible = "syscon", "simple-mfd";
+ compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
pinctrl: pinctrl {
--
2.9.3
^ permalink raw reply related
* [PATCH v4 0/5] pinctrl: aspeed: Implement remaining pins
From: Andrew Jeffery @ 2016-12-20 7:35 UTC (permalink / raw)
To: Linus Walleij
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Lee Jones,
Joel Stanley, linux-gpio, devicetree, linux-kernel
Hi Linus,
This is v4 of the series implementing the remainder of the pinmux tables for
the AST2400 and AST2500 SoCs. v3 of the series can be found here:
https://lkml.org/lkml/2016/12/5/847
Cheers,
Andrew
Changes since v3:
* Add a patch fixing the AST2400 SCU compatible strings in the Aspeed pinctrl
bindings. They are mentioned to define the expectations on the pinctrl node's
parent and also in the examples to illustrate the relationship.
* Rework the g5 example bindings in patch 2/5 to reflect the LPC/LHC
bindings[1][2], and fix the SCU compatible string.
[1] https://lkml.org/lkml/2016/12/20/63
[2] https://lkml.org/lkml/2016/12/20/62
Significant changes since v2:
* The fix for touching bit SCU90[6] has been applied, so the patch has been
dropped.
* The MFD devicetree bindings patches have been split out into their own
series: https://lkml.org/lkml/2016/12/5/835
* Rework the "Read and write bits in LPC and GFX controllers" patch so that the
changes are backwards compatible with existing devicetrees. This will lead to
limited functionality, but no more limited than what systems with those
devicetrees already experience.
* A fix for the kerneldoc return value descriptions
Significant changes since v1:
* Fixes from v1 have been applied, so have been dropped for v2
* A new fix has appeared, "pinctrl-aspeed-g5: Never set SCU90[6]", as noted
above
* New bindings documents for the SoC Display and LPC Host Controllers, driven
by the patch "pinctrl: aspeed: Read and write bits in LPCHC and GFX
controllers"
* The v1 patch "pinctrl: aspeed: Enable capture of off-SCU pinmux state" has
been significantly reworked and is now titled "pinctrl: aspeed: Read and
write bits in LPCHC and GFX controllers"
Andrew Jeffery (5):
pinctrl: aspeed: dt: Fix compatibles for the System Control Unit
pinctrl: aspeed: Read and write bits in LPC and GFX controllers
pinctrl: aspeed-g4: Add mux configuration for all pins
pinctrl: aspeed-g5: Add mux configuration for all pins
pinctrl: aspeed: Fix kerneldoc return descriptions
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 127 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1115 +++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 1524 +++++++++++++++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 165 ++-
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 33 +-
5 files changed, 2835 insertions(+), 129 deletions(-)
--
2.9.3
^ permalink raw reply
* [PATCH v4 5/5] mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
From: Andrew Jeffery @ 2016-12-20 7:15 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161220071535.27542-1-andrew@aj.id.au>
The Aspeed SoC Display Controller is presented as a syscon device to
arbitrate access by display and pinmux drivers. Video pinmux
configuration on fifth generation SoCs depends on bits in both the
System Control Unit and the Display Controller.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/mfd/aspeed-gfx.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
new file mode 100644
index 000000000000..aea5370efd97
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
@@ -0,0 +1,17 @@
+* Device tree bindings for Aspeed SoC Display Controller (GFX)
+
+The Aspeed SoC Display Controller primarily does as its name suggests, but also
+participates in pinmux requests on the g5 SoCs. It is therefore considered a
+syscon device.
+
+Required properties:
+- compatible: "aspeed,ast2500-gfx", "syscon"
+- reg: contains offset/length value of the GFX memory
+ region.
+
+Example:
+
+gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v4 4/5] mfd: dt: Add bindings for the Aspeed LPC Host Controller (LHC)
From: Andrew Jeffery @ 2016-12-20 7:15 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161220071535.27542-1-andrew@aj.id.au>
The LPC bus pinmux configuration on fifth generation Aspeed SoCs depends
on bits in both the System Control Unit and the LPC Host Controller.
The Aspeed LPC Host Controller is described as a child node of the
LPC host-range syscon device for arbitration of access by the host
controller and pinmux drivers.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
Linus: I've retained your r-b tag I don't think the addition of the ast2400
compatible string will fuss you. Please let me know if you feel this is
inappropriate.
.../devicetree/bindings/mfd/aspeed-lpc.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
index a97131aba446..514d82ced95b 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -109,3 +109,29 @@ lpc: lpc@1e789000 {
};
};
+Host Node Children
+==================
+
+LPC Host Controller
+-------------------
+
+The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
+between the host and the baseboard management controller. The registers exist
+in the "host" portion of the Aspeed LPC controller, which must be the parent of
+the LPC host controller node.
+
+Required properties:
+
+- compatible: One of:
+ "aspeed,ast2400-lhc";
+ "aspeed,ast2500-lhc";
+
+- reg: contains offset/length values of the LHC memory regions. In the
+ AST2400 and AST2500 there are two regions.
+
+Example:
+
+lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v4 3/5] mfd: dt: Add Aspeed Low Pin Count Controller bindings
From: Andrew Jeffery @ 2016-12-20 7:15 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161220071535.27542-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/mfd/aspeed-lpc.txt | 111 +++++++++++++++++++++
1 file changed, 111 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
new file mode 100644
index 000000000000..a97131aba446
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -0,0 +1,111 @@
+======================================================================
+Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller
+======================================================================
+
+The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
+peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
+primary use case of the Aspeed LPC controller is as a slave on the bus
+(typically in a Baseboard Management Controller SoC), but under certain
+conditions it can also take the role of bus master.
+
+The LPC controller is represented as a multi-function device to account for the
+mix of functionality it provides. The principle split is between the register
+layout at the start of the I/O space which is, to quote the Aspeed datasheet,
+"basically compatible with the [LPC registers from the] popular BMC controller
+H8S/2168[1]", and everything else, where everything else is an eclectic
+collection of functions with a esoteric register layout. "Everything else",
+here labeled the "host" portion of the controller, includes, but is not limited
+to:
+
+* An IPMI Block Transfer[2] Controller
+
+* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the
+ physical properties of some LPC pins, configuration of serial IRQs, and
+ APB-to-LPC bridging amonst other functions.
+
+* An LPC Host Interface Controller: Manages functions exposed to the host such
+ as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
+ management and bus snoop configuration.
+
+* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom
+ hardware management protocols for handover between the host and baseboard
+ management controller.
+
+Additionally the state of the LPC controller influences the pinmux
+configuration, therefore the host portion of the controller is exposed as a
+syscon as a means to arbitrate access.
+
+[0] http://www.intel.com/design/chipsets/industry/25128901.pdf
+[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4
+[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
+[3] https://en.wikipedia.org/wiki/Super_I/O
+
+Required properties
+===================
+
+- compatible: One of:
+ "aspeed,ast2400-lpc", "simple-mfd"
+ "aspeed,ast2500-lpc", "simple-mfd"
+
+- reg: contains the physical address and length values of the Aspeed
+ LPC memory region.
+
+- #address-cells: <1>
+- #size-cells: <1>
+- ranges: Maps 0 to the physical address and length of the LPC memory
+ region
+
+Required LPC Child nodes
+========================
+
+BMC Node
+--------
+
+- compatible: One of:
+ "aspeed,ast2400-lpc-bmc"
+ "aspeed,ast2500-lpc-bmc"
+
+- reg: contains the physical address and length values of the
+ H8S/2168-compatible LPC controller memory region
+
+Host Node
+---------
+
+- compatible: One of:
+ "aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
+ "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
+
+- reg: contains the address and length values of the host-related
+ register space for the Aspeed LPC controller
+
+- #address-cells: <1>
+- #size-cells: <1>
+- ranges: Maps 0 to the address and length of the host-related LPC memory
+ region
+
+Example:
+
+lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2500-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e789000 0x1000>;
+
+ lpc_bmc: lpc-bmc@0 {
+ compatible = "aspeed,ast2500-lpc-bmc";
+ reg = <0x0 0x80>;
+ };
+
+ lpc_host: lpc-host@80 {
+ compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
+ reg-io-width = <4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80 0x1e0>;
+ };
+};
+
--
2.9.3
^ permalink raw reply related
* [PATCH v4 2/5] mfd: dt: ranges, #address-cells and #size-cells as optional properties
From: Andrew Jeffery @ 2016-12-20 7:15 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161220071535.27542-1-andrew@aj.id.au>
Whilst describing a device and not a bus, simple-mfd is modelled on
simple-bus where child nodes are iterated and registered as platform
devices. Some complex devices, e.g. the Aspeed LPC controller, can
benefit from address space mapping such that child nodes can use the
regs property to describe their resource offsets within the
multi-function device.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/mfd/mfd.txt | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
index f1fceeda12f1..bcb6abb9d413 100644
--- a/Documentation/devicetree/bindings/mfd/mfd.txt
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -25,6 +25,16 @@ Optional properties:
be used. In the latter case the child devices will be determined by the
operating system.
+- ranges: Describes the address mapping relationship to the parent. Should set
+ the child's base address to 0, the physical address within parent's address
+ space, and the length of the address map.
+
+- #address-cells: Specifies the number of cells used to represent physical base
+ addresses. Must be present if ranges is used.
+
+- #size-cells: Specifies the number of cells used to represent the size of an
+ address. Must be present if ranges is used.
+
Example:
foo@1000 {
--
2.9.3
^ permalink raw reply related
* [PATCH v4 1/5] mfd: dt: Fix "indicates" typo in mfd bindings document
From: Andrew Jeffery @ 2016-12-20 7:15 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20161220071535.27542-1-andrew@aj.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/mfd/mfd.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
index af9d6931a1a2..f1fceeda12f1 100644
--- a/Documentation/devicetree/bindings/mfd/mfd.txt
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -19,7 +19,7 @@ Optional properties:
- compatible : "simple-mfd" - this signifies that the operating system should
consider all subnodes of the MFD device as separate devices akin to how
- "simple-bus" inidicates when to see subnodes as children for a simple
+ "simple-bus" indicates when to see subnodes as children for a simple
memory-mapped bus. For more complex devices, when the nexus driver has to
probe registers to figure out what child devices exist etc, this should not
be used. In the latter case the child devices will be determined by the
--
2.9.3
^ permalink raw reply related
* [PATCH v4 0/5] mfd: dt: Add bindings for the Aspeed MFDs
From: Andrew Jeffery @ 2016-12-20 7:15 UTC (permalink / raw)
To: Lee Jones
Cc: Andrew Jeffery, Rob Herring, Mark Rutland, Linus Walleij,
Corey Minyard, Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-kernel
Hi Lee,
Here's v4 of the Aspeed LPC MFD devicetree bindings series. v3 can be found at:
https://lkml.org/lkml/2016/12/5/835
Changes since v3:
* Based on Arnd's argument[1], drop the addition of the mfd/syscon bindings
directory as well as the the last patch in v3, which moved a number of
existing bindings. Eventually the Aspeed display controller will have a
device-specific driver so it doesn't belong there either.
* Add a compatible string for the AST2400 in the LPC Host Controller bindings
as requested by Joel and slightly tweak the reg description for Rob.
[1] https://lkml.org/lkml/2016/12/13/202
Andrew Jeffery (5):
mfd: dt: Fix "indicates" typo in mfd bindings document
mfd: dt: ranges, #address-cells and #size-cells as optional properties
mfd: dt: Add Aspeed Low Pin Count Controller bindings
mfd: dt: Add bindings for the Aspeed LPC Host Controller (LHC)
mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX)
.../devicetree/bindings/mfd/aspeed-gfx.txt | 17 +++
.../devicetree/bindings/mfd/aspeed-lpc.txt | 137 +++++++++++++++++++++
Documentation/devicetree/bindings/mfd/mfd.txt | 12 +-
3 files changed, 165 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
--
2.9.3
^ permalink raw reply
* [PATCH] ARM: dts: sun8i: add a delay after reset xr819 on Orange Pi Zero
From: Icenowy Zheng @ 2016-12-20 5:58 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Hans de Goede
Cc: devicetree, linux-kernel, linux-arm-kernel, Icenowy Zheng
XR819 seems to need a delay after its reset line to be deasserted,
otherwise it may not respond MMC commands correctly, and fail to
initialize.
Add a 200ms delay in the mmc-pwrseq.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index d18807f73060..b7ca916d871d 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -92,6 +92,7 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
};
};
--
2.11.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox