* [PATCH 3/3] power: bq27xxx: add support for NVRAM R/W access
From: Matt Ranostay @ 2016-12-26 5:44 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-pm-u79uwXL29TY76Z2rM5mHXA
Cc: Sebastian Reichel, Tony Lindgren, Matt Ranostay
In-Reply-To: <20161226054442.23599-1-matt-sk+viVC6FLCDq+mSdOJa79kegs52MxvZ@public.gmane.org>
Initial support for access and modification of the non-volatile regions
of the bq27425 fuel gauge DesignEnergy, DesignCapacity, and
TerminateVoltage settings.
This is intended for fine tuning the fuel gauge state machine for the
respective battery specifications.
Cc: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Matt Ranostay <matt-sk+viVC6FLCDq+mSdOJa79kegs52MxvZ@public.gmane.org>
---
drivers/power/supply/bq27xxx_battery_i2c.c | 334 +++++++++++++++++++++++++++++
include/linux/power/bq27xxx_battery.h | 4 +
2 files changed, 338 insertions(+)
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index 27143230839a..c6f641cd3940 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -14,9 +14,11 @@
* GNU General Public License for more details.
*/
+#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <asm/unaligned.h>
#include <linux/power/bq27xxx_battery.h>
@@ -24,6 +26,48 @@
static DEFINE_IDR(battery_id);
static DEFINE_MUTEX(battery_mutex);
+#define BQ27XXX_TERM_V_MIN 2800
+#define BQ27XXX_TERM_V_MAX 3700
+
+#define BQ27XXX_REG_CTRL 0
+
+#define BQ27XXX_BLOCK_DATA_CLASS 0x3E
+#define BQ27XXX_DATA_BLOCK 0x3F
+#define BQ27XXX_BLOCK_DATA 0x40
+#define BQ27XXX_BLOCK_DATA_CHECKSUM 0x60
+#define BQ27XXX_BLOCK_DATA_CONTROL 0x61
+#define BQ27XXX_SET_CFGUPDATE 0x13
+#define BQ27XXX_SOFT_RESET 0x42
+
+enum bq27xxx_dm_subclass_index {
+ BQ27XXX_DM_DESIGN_CAP = 0,
+ BQ27XXX_DM_DESIGN_ENERGY,
+ BQ27XXX_DM_TERMINATE_VOLTAGE,
+ BQ27XXX_NUM_IDX,
+};
+
+struct bq27xxx_dm_regs {
+ unsigned int subclass_id;
+ unsigned int offset;
+ char *name;
+};
+
+#define BQ27XXX_GAS_GAUGING_STATE_SUBCLASS 82
+
+static struct bq27xxx_dm_regs bq27425_dm_subclass_regs[] = {
+ { BQ27XXX_GAS_GAUGING_STATE_SUBCLASS, 12, "design-capacity" },
+ { BQ27XXX_GAS_GAUGING_STATE_SUBCLASS, 14, "design-energy" },
+ { BQ27XXX_GAS_GAUGING_STATE_SUBCLASS, 18, "terminate-voltage" },
+};
+
+static struct bq27xxx_dm_regs *bq27xxx_dm_subclass_regs[] = {
+ [BQ27425] = bq27425_dm_subclass_regs,
+};
+
+static unsigned int bq27xxx_unseal_keys[] = {
+ [BQ27425] = 0x04143672,
+};
+
static irqreturn_t bq27xxx_battery_irq_handler_thread(int irq, void *data)
{
struct bq27xxx_device_info *di = data;
@@ -68,6 +112,288 @@ static int bq27xxx_battery_i2c_read(struct bq27xxx_device_info *di, u8 reg,
return ret;
}
+static int bq27xxx_battery_i2c_write(struct bq27xxx_device_info *di, u8 reg,
+ int value, bool single)
+{
+ struct i2c_client *client = to_i2c_client(di->dev);
+ struct i2c_msg msg;
+ unsigned char data[4];
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ data[0] = reg;
+ if (single) {
+ data[1] = (unsigned char) value;
+ msg.len = 2;
+ } else {
+ put_unaligned_le16(value, &data[1]);
+ msg.len = 3;
+ }
+
+ msg.buf = data;
+ msg.addr = client->addr;
+ msg.flags = 0;
+
+ return i2c_transfer(client->adapter, &msg, 1) == 1 ? 0 : -EINVAL;
+}
+
+static int bq27xxx_battery_i2c_bulk_read(struct bq27xxx_device_info *di, u8 reg,
+ u8 *data, int len)
+{
+ struct i2c_client *client = to_i2c_client(di->dev);
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ return i2c_smbus_read_i2c_block_data(client, reg, len, data);
+}
+
+static int bq27xxx_battery_i2c_bulk_write(struct bq27xxx_device_info *di,
+ u8 reg, u8 *data, int len)
+{
+ struct i2c_client *client = to_i2c_client(di->dev);
+ struct i2c_msg msg;
+ u8 buf[33];
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ buf[0] = reg;
+ memcpy(&buf[1], data, len);
+
+ msg.buf = buf;
+ msg.addr = client->addr;
+ msg.flags = 0;
+ msg.len = len + 1;
+
+ return i2c_transfer(client->adapter, &msg, 1) == 1 ? 0 : -EINVAL;
+}
+
+static int bq27xxx_battery_i2c_set_seal_state(struct bq27xxx_device_info *di,
+ bool state)
+{
+ unsigned int key = bq27xxx_unseal_keys[di->chip];
+ int ret;
+
+ if (state)
+ return di->bus.write(di, BQ27XXX_REG_CTRL, 0x20, false);
+
+ ret = di->bus.write(di, BQ27XXX_REG_CTRL, (key >> 16) & 0xffff, false);
+ if (ret < 0)
+ return ret;
+
+ return di->bus.write(di, BQ27XXX_REG_CTRL, key & 0xffff, false);
+}
+
+static int bq27xxx_battery_i2c_read_dm_block(struct bq27xxx_device_info *di,
+ int subclass)
+{
+ int ret = di->bus.write(di, BQ27XXX_REG_CTRL, 0, false);
+
+ if (ret < 0)
+ return ret;
+
+ ret = di->bus.write(di, BQ27XXX_BLOCK_DATA_CONTROL, 0, true);
+ if (ret < 0)
+ return ret;
+
+ ret = di->bus.write(di, BQ27XXX_BLOCK_DATA_CLASS, subclass, true);
+ if (ret < 0)
+ return ret;
+
+ ret = di->bus.write(di, BQ27XXX_DATA_BLOCK, 0, true);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(1000, 1500);
+
+ return di->bus.read_bulk(di, BQ27XXX_BLOCK_DATA,
+ (u8 *) &di->buffer, sizeof(di->buffer));
+}
+
+static int bq27xxx_battery_i2c_print_config(struct bq27xxx_device_info *di)
+{
+ struct bq27xxx_dm_regs *reg = bq27xxx_dm_subclass_regs[di->chip];
+ int ret, i;
+
+ ret = bq27xxx_battery_i2c_read_dm_block(di,
+ BQ27XXX_GAS_GAUGING_STATE_SUBCLASS);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < BQ27XXX_NUM_IDX; i++) {
+ int val;
+
+ if (reg->subclass_id != BQ27XXX_GAS_GAUGING_STATE_SUBCLASS)
+ continue;
+
+ val = be16_to_cpup((u16 *) &di->buffer[reg->offset]);
+
+ dev_info(di->dev, "settings for %s set at %d\n", reg->name, val);
+
+ reg++;
+ }
+
+ return 0;
+}
+
+static bool bq27xxx_battery_update_dm_setting(struct bq27xxx_device_info *di,
+ unsigned int reg, unsigned int val)
+{
+ struct bq27xxx_dm_regs *dm_reg = &bq27xxx_dm_subclass_regs[di->chip][reg];
+ u16 *prev = (u16 *) &di->buffer[dm_reg->offset];
+
+ if (be16_to_cpup(prev) == val)
+ return false;
+
+ *prev = cpu_to_be16(val);
+
+ return true;
+}
+
+static u8 bq27xxx_battery_checksum(struct bq27xxx_device_info *di)
+{
+ u8 *data = (u8 *) &di->buffer;
+ u16 sum = 0;
+ int i;
+
+ for (i = 0; i < sizeof(di->buffer); i++) {
+ sum += data[i];
+ sum &= 0xff;
+ }
+
+ return 0xff - sum;
+}
+
+static int bq27xxx_battery_i2c_write_nvram(struct bq27xxx_device_info *di,
+ unsigned int subclass)
+{
+ int ret;
+
+ ret = di->bus.write(di, BQ27XXX_REG_CTRL, BQ27XXX_SET_CFGUPDATE, false);
+ if (ret)
+ return ret;
+
+ ret = di->bus.write(di, BQ27XXX_BLOCK_DATA_CONTROL, 0, true);
+ if (ret)
+ return ret;
+
+ ret = di->bus.write(di, BQ27XXX_BLOCK_DATA_CLASS, subclass, true);
+ if (ret)
+ return ret;
+
+ ret = di->bus.write(di, BQ27XXX_DATA_BLOCK, 0, true);
+ if (ret)
+ return ret;
+
+ ret = di->bus.write_bulk(di, BQ27XXX_BLOCK_DATA,
+ (u8 *) &di->buffer, sizeof(di->buffer));
+ if (ret < 0)
+ return ret;
+
+ usleep_range(1000, 1500);
+
+ di->bus.write(di, BQ27XXX_BLOCK_DATA_CHECKSUM,
+ bq27xxx_battery_checksum(di), true);
+
+ usleep_range(1000, 1500);
+
+ di->bus.write(di, BQ27XXX_REG_CTRL, BQ27XXX_SOFT_RESET, false);
+
+ return 0;
+}
+
+static int bq27xxx_battery_i2c_set_config(struct bq27xxx_device_info *di,
+ unsigned int cap, unsigned int energy,
+ unsigned int voltage)
+{
+ int ret = bq27xxx_battery_i2c_read_dm_block(di,
+ BQ27XXX_GAS_GAUGING_STATE_SUBCLASS);
+
+ if (ret < 0)
+ return ret;
+
+ ret = bq27xxx_battery_update_dm_setting(di, BQ27XXX_DM_DESIGN_CAP, cap);
+ ret |= bq27xxx_battery_update_dm_setting(di, BQ27XXX_DM_DESIGN_ENERGY,
+ energy);
+ ret |= bq27xxx_battery_update_dm_setting(di, BQ27XXX_DM_TERMINATE_VOLTAGE,
+ voltage);
+
+ if (ret) {
+ dev_info(di->dev, "updating NVM settings\n");
+ return bq27xxx_battery_i2c_write_nvram(di,
+ BQ27XXX_GAS_GAUGING_STATE_SUBCLASS);
+ }
+
+ return 0;
+}
+
+static int bq27xxx_battery_i2c_parse_dt(struct bq27xxx_device_info *di)
+{
+ struct device_node *np = di->dev->of_node;
+ int cap, energy, voltage = -EINVAL;
+ int ret = 0;
+
+ /* no settings to be set for this chipset so abort */
+ if (!bq27xxx_dm_subclass_regs[di->chip])
+ return 0;
+
+ bq27xxx_battery_i2c_set_seal_state(di, false);
+
+ if (np) {
+ ret = of_property_read_u32(np, "ti,design-capacity", &cap);
+ if (ret < 0 || cap > 0x7fff) {
+ if (!ret)
+ dev_err(di->dev,
+ "invalid ti,design-capacity %d\n",
+ cap);
+ cap = -EINVAL;
+ }
+
+ ret = of_property_read_u32(np, "ti,design-energy", &energy);
+ if (ret < 0 || energy > 0x7fff) {
+ if (!ret)
+ dev_err(di->dev,
+ "invalid ti,design-energy %d\n",
+ energy);
+ energy = -EINVAL;
+ }
+
+ ret = of_property_read_u32(np, "ti,terminate-voltage", &voltage);
+ if (ret < 0 || voltage < BQ27XXX_TERM_V_MIN
+ || voltage > BQ27XXX_TERM_V_MAX) {
+ if (!ret)
+ dev_err(di->dev,
+ "invalid ti,terminate-voltage %d\n",
+ voltage);
+ voltage = -EINVAL;
+ }
+
+ /* assume that we want the defaults */
+ if (cap < 0 && energy < 0 && voltage < 0) {
+ ret = 0;
+ goto out;
+ }
+
+ /* we need all three settings for safety reasons */
+ if (cap < 0 || energy < 0 || voltage < 0) {
+ dev_err(di->dev,
+ "missing or invalid devicetree values; NVM not updated\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = bq27xxx_battery_i2c_set_config(di, cap, energy, voltage);
+ }
+
+out:
+ bq27xxx_battery_i2c_print_config(di);
+ bq27xxx_battery_i2c_set_seal_state(di, true);
+
+ return ret;
+}
+
static int bq27xxx_battery_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -95,7 +421,15 @@ static int bq27xxx_battery_i2c_probe(struct i2c_client *client,
di->dev = &client->dev;
di->chip = id->driver_data;
di->name = name;
+
di->bus.read = bq27xxx_battery_i2c_read;
+ di->bus.write = bq27xxx_battery_i2c_write;
+ di->bus.read_bulk = bq27xxx_battery_i2c_bulk_read;
+ di->bus.write_bulk = bq27xxx_battery_i2c_bulk_write;
+
+ ret = bq27xxx_battery_i2c_parse_dt(di);
+ if (ret)
+ goto err_failed;
ret = bq27xxx_battery_setup(di);
if (ret)
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 14ecac158150..22b4cfc3acab 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -33,6 +33,9 @@ struct bq27xxx_platform_data {
struct bq27xxx_device_info;
struct bq27xxx_access_methods {
int (*read)(struct bq27xxx_device_info *di, u8 reg, bool single);
+ int (*write)(struct bq27xxx_device_info *di, u8 reg, int value, bool single);
+ int (*read_bulk)(struct bq27xxx_device_info *di, u8 reg, u8 *data, int len);
+ int (*write_bulk)(struct bq27xxx_device_info *di, u8 reg, u8 *data, int len);
};
struct bq27xxx_reg_cache {
@@ -62,6 +65,7 @@ struct bq27xxx_device_info {
struct power_supply *bat;
struct list_head list;
struct mutex lock;
+ u8 buffer[32];
u8 *regs;
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [RESEND 1/2] document: dt: add binding for Hi3660 SoC
From: Chen Feng @ 2016-12-26 9:36 UTC (permalink / raw)
To: puck.chen, xuwei5, robh+dt, mark.rutland, catalin.marinas,
will.deacon, linux-arm-kernel, devicetree, linux-kernel
Cc: suzhuangluan, xuyiping
Add binding for hisilicon Hi3660 SoC and HiKey960 Board.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
---
Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 3f81575..7cf2847 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -8,6 +8,10 @@ Hi6220 SoC
Required root node properties:
- compatible = "hisilicon,hi6220";
+Hi3660 SoC
+Required root node properties:
+ - compatible = "hisilicon,hi3660";
+
HiKey Board
Required root node properties:
- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
--
1.9.1
^ permalink raw reply related
* [RESEND 2/2] arm64: dts: Add dts files for Hisilicon Hi3660 SoC
From: Chen Feng @ 2016-12-26 9:36 UTC (permalink / raw)
To: puck.chen, xuwei5, robh+dt, mark.rutland, catalin.marinas,
will.deacon, linux-arm-kernel, devicetree, linux-kernel
Cc: suzhuangluan, xuyiping
In-Reply-To: <1482744972-56622-1-git-send-email-puck.chen@hisilicon.com>
Add initial dtsi file to support Hisilicon Hi3660 SoC with
support of Octal core CPUs in two clusters(4 * A53 & 4 * A73).
Also add dts file to support HiKey960 development board which
based on Hi3660 SoC.
The output console is earlycon "earlycon=pl011,0xfdf05000".
And the con_init uart5 with a fixed clock, which already
configured at bootloader.
When clock is available, the uart5 will be modified.
Tested on HiKey960 Board.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
---
arch/arm64/boot/dts/hisilicon/Makefile | 1 +
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 34 +++++
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 156 ++++++++++++++++++++++
3 files changed, 191 insertions(+)
create mode 100644 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
create mode 100644 arch/arm64/boot/dts/hisilicon/hi3660.dtsi
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index d5f43a0..b633b5d 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
new file mode 100644
index 0000000..3d7aead
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -0,0 +1,34 @@
+/*
+ * dts file for Hisilicon HiKey960 Development Board
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3660.dtsi"
+
+/ {
+ model = "HiKey960";
+ compatible = "hisilicon,hi3660";
+
+ aliases {
+ serial5 = &uart5; /* console UART */
+ };
+
+ chosen {
+ stdout-path = "serial5:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x00400000 0x0 0xBFE00000>;
+ };
+
+ soc {
+ uart5: uart@fdf05000 {
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
new file mode 100644
index 0000000..7f9805c
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -0,0 +1,156 @@
+/*
+ * dts file for Hisilicon Hi3660 SoC
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hi3660";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@e82b0000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+ <0x0 0xe82b2000 0 0x2000>, /* GICC */
+ <0x0 0xe82b4000 0 0x2000>, /* GICH */
+ <0x0 0xe82b6000 0 0x2000>; /* GICV */
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <1920000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ fixed_uart5: fixed_19_2M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "fixed:uart5";
+ };
+
+ uart5: uart@fdf05000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfdf05000 0x0 0x1000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&fixed_uart5 &fixed_uart5>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "ok";
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related
* Re: [RFC PATCH v2 3/4] hwmon: adc128d818: Trivial code style fixup
From: Guenter Roeck @ 2016-12-26 10:47 UTC (permalink / raw)
To: Alexander Koch, linux-kernel, linux-hwmon, devicetree
Cc: Rob Herring, Mark Rutland, Jean Delvare, Jiri Kosina
In-Reply-To: <20161223221205.8825-4-mail@alexanderkoch.net>
On 12/23/2016 02:12 PM, Alexander Koch wrote:
> Replace sysfs symbolic file permissions, e.g. 'S_IRUGO', by octal
> permissions. This fixes checkpatch.pl warnings.
>
> Signed-off-by: Alexander Koch <mail@alexanderkoch.net>
Please do not bother with those warnings and ignore checkpatch.
We are in the process of doing an automated conversion.
Thanks,
Guenter
> ---
> drivers/hwmon/adc128d818.c | 99 ++++++++++++++++++----------------------------
> 1 file changed, 39 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c
> index 8667f454ea11..cbb3bc5e5229 100644
> --- a/drivers/hwmon/adc128d818.c
> +++ b/drivers/hwmon/adc128d818.c
> @@ -242,69 +242,48 @@ static ssize_t adc128_show_alarm(struct device *dev,
> return sprintf(buf, "%u\n", !!(alarms & mask));
> }
>
> -static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO,
> - adc128_show_in, NULL, 0, 0);
> -static SENSOR_DEVICE_ATTR_2(in0_min, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 0, 1);
> -static SENSOR_DEVICE_ATTR_2(in0_max, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 0, 2);
> -
> -static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO,
> - adc128_show_in, NULL, 1, 0);
> -static SENSOR_DEVICE_ATTR_2(in1_min, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 1, 1);
> -static SENSOR_DEVICE_ATTR_2(in1_max, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 1, 2);
> -
> -static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO,
> - adc128_show_in, NULL, 2, 0);
> -static SENSOR_DEVICE_ATTR_2(in2_min, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 2, 1);
> -static SENSOR_DEVICE_ATTR_2(in2_max, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 2, 2);
> -
> -static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO,
> - adc128_show_in, NULL, 3, 0);
> -static SENSOR_DEVICE_ATTR_2(in3_min, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 3, 1);
> -static SENSOR_DEVICE_ATTR_2(in3_max, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 3, 2);
> -
> -static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO,
> - adc128_show_in, NULL, 4, 0);
> -static SENSOR_DEVICE_ATTR_2(in4_min, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 4, 1);
> -static SENSOR_DEVICE_ATTR_2(in4_max, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 4, 2);
> -
> -static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO,
> - adc128_show_in, NULL, 5, 0);
> -static SENSOR_DEVICE_ATTR_2(in5_min, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 5, 1);
> -static SENSOR_DEVICE_ATTR_2(in5_max, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 5, 2);
> -
> -static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO,
> - adc128_show_in, NULL, 6, 0);
> -static SENSOR_DEVICE_ATTR_2(in6_min, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 6, 1);
> -static SENSOR_DEVICE_ATTR_2(in6_max, S_IWUSR | S_IRUGO,
> - adc128_show_in, adc128_set_in, 6, 2);
> -
> -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adc128_show_temp, NULL, 0);
> -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
> +static SENSOR_DEVICE_ATTR_2(in0_input, 0444, adc128_show_in, NULL, 0, 0);
> +static SENSOR_DEVICE_ATTR_2(in0_min, 0644, adc128_show_in, adc128_set_in, 0, 1);
> +static SENSOR_DEVICE_ATTR_2(in0_max, 0644, adc128_show_in, adc128_set_in, 0, 2);
> +
> +static SENSOR_DEVICE_ATTR_2(in1_input, 0444, adc128_show_in, NULL, 1, 0);
> +static SENSOR_DEVICE_ATTR_2(in1_min, 0644, adc128_show_in, adc128_set_in, 1, 1);
> +static SENSOR_DEVICE_ATTR_2(in1_max, 0644, adc128_show_in, adc128_set_in, 1, 2);
> +
> +static SENSOR_DEVICE_ATTR_2(in2_input, 0444, adc128_show_in, NULL, 2, 0);
> +static SENSOR_DEVICE_ATTR_2(in2_min, 0644, adc128_show_in, adc128_set_in, 2, 1);
> +static SENSOR_DEVICE_ATTR_2(in2_max, 0644, adc128_show_in, adc128_set_in, 2, 2);
> +
> +static SENSOR_DEVICE_ATTR_2(in3_input, 0444, adc128_show_in, NULL, 3, 0);
> +static SENSOR_DEVICE_ATTR_2(in3_min, 0644, adc128_show_in, adc128_set_in, 3, 1);
> +static SENSOR_DEVICE_ATTR_2(in3_max, 0644, adc128_show_in, adc128_set_in, 3, 2);
> +
> +static SENSOR_DEVICE_ATTR_2(in4_input, 0444, adc128_show_in, NULL, 4, 0);
> +static SENSOR_DEVICE_ATTR_2(in4_min, 0644, adc128_show_in, adc128_set_in, 4, 1);
> +static SENSOR_DEVICE_ATTR_2(in4_max, 0644, adc128_show_in, adc128_set_in, 4, 2);
> +
> +static SENSOR_DEVICE_ATTR_2(in5_input, 0444, adc128_show_in, NULL, 5, 0);
> +static SENSOR_DEVICE_ATTR_2(in5_min, 0644, adc128_show_in, adc128_set_in, 5, 1);
> +static SENSOR_DEVICE_ATTR_2(in5_max, 0644, adc128_show_in, adc128_set_in, 5, 2);
> +
> +static SENSOR_DEVICE_ATTR_2(in6_input, 0444, adc128_show_in, NULL, 6, 0);
> +static SENSOR_DEVICE_ATTR_2(in6_min, 0644, adc128_show_in, adc128_set_in, 6, 1);
> +static SENSOR_DEVICE_ATTR_2(in6_max, 0644, adc128_show_in, adc128_set_in, 6, 2);
> +
> +static SENSOR_DEVICE_ATTR(temp1_input, 0444, adc128_show_temp, NULL, 0);
> +static SENSOR_DEVICE_ATTR(temp1_max, 0644,
> adc128_show_temp, adc128_set_temp, 1);
> -static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
> +static SENSOR_DEVICE_ATTR(temp1_max_hyst, 0644,
> adc128_show_temp, adc128_set_temp, 2);
>
> -static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, adc128_show_alarm, NULL, 0);
> -static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, adc128_show_alarm, NULL, 1);
> -static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, adc128_show_alarm, NULL, 2);
> -static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, adc128_show_alarm, NULL, 3);
> -static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, adc128_show_alarm, NULL, 4);
> -static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, adc128_show_alarm, NULL, 5);
> -static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, adc128_show_alarm, NULL, 6);
> -static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adc128_show_alarm, NULL, 7);
> +static SENSOR_DEVICE_ATTR(in0_alarm, 0444, adc128_show_alarm, NULL, 0);
> +static SENSOR_DEVICE_ATTR(in1_alarm, 0444, adc128_show_alarm, NULL, 1);
> +static SENSOR_DEVICE_ATTR(in2_alarm, 0444, adc128_show_alarm, NULL, 2);
> +static SENSOR_DEVICE_ATTR(in3_alarm, 0444, adc128_show_alarm, NULL, 3);
> +static SENSOR_DEVICE_ATTR(in4_alarm, 0444, adc128_show_alarm, NULL, 4);
> +static SENSOR_DEVICE_ATTR(in5_alarm, 0444, adc128_show_alarm, NULL, 5);
> +static SENSOR_DEVICE_ATTR(in6_alarm, 0444, adc128_show_alarm, NULL, 6);
> +static SENSOR_DEVICE_ATTR(temp1_max_alarm, 0444, adc128_show_alarm, NULL, 7);
>
> static struct attribute *adc128_attrs[] = {
> &sensor_dev_attr_in0_min.dev_attr.attr,
>
^ permalink raw reply
* RE: [PATCH] adc: add adc driver for Hisilicon BVT SOCs
From: liurenzhong @ 2016-12-26 11:05 UTC (permalink / raw)
To: Jonathan Cameron, jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
knaack.h-Mmb7MZpHnFY@public.gmane.org,
lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org
Cc: akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
vilhelm.gray-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
zhiyong.tao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
daniel.baluta-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
leonard.crestez-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
raveendra.padasalagi-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
mranostay-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
amsfield22-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel
In-Reply-To: <951BC246-0676-4DBF-856B-832E0F977ACB-tko9wxEg+fIOOJlXag/Snyp2UmYkHbXO@public.gmane.org>
Hi Jonathan,
Thanks very much for your reply , it get me great courage to continue this upstreaming .
we will make a careful analysis of your suggestion and update a new patch after a few days.
Best regards
/Allen
/---------------------/
From: Jonathan Cameron [mailto:jic23@jic23.retrosnub.co.uk]
Sent: 24 December 2016 19:46
To: liurenzhong; jic23@kernel.org; knaack.h@gmx.de; lars@metafoo.de; pmeerw@pmeerw.net; robh+dt@kernel.org; mark.rutland@arm.com
Cc: akinobu.mita@gmail.com; ludovic.desroches@atmel.com; krzk@kernel.org; vilhelm.gray@gmail.com; ksenija.stanojevic@gmail.com; zhiyong.tao@mediatek.com; daniel.baluta@intel.com; leonard.crestez@intel.com; ray.jui@broadcom.com; raveendra.padasalagi@broadcom.com; mranostay@gmail.com; amsfield22@gmail.com; linux-iio@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Xuejiancheng; Lixu (kevin)
Subject: Re: [PATCH] adc: add adc driver for Hisilicon BVT SOCs
On 24 December 2016 01:54:57 GMT+00:00, Allen Liu <liurenzhong@hisilicon.com> wrote:
>Add ADC driver for the ADC controller found on HiSilicon BVT SOCs, like
>Hi3516CV300, etc.
>The ADC controller is primarily in charge of detecting voltage.
>
>Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
>Signed-off-by: Allen Liu <liurenzhong@hisilicon.com>
Reading on phone so may not be that thorough!
Looks pretty good. The device abstraction makes it slightly more complicated than it needs to be. If you aren't going to follow up quickly with other device support please drop the abstraction. It can be easily readded when needed.
Various little things inline.
Thanks
Jonathan
>---
> .../devicetree/bindings/iio/adc/hibvt-lsadc.txt | 26 ++
> drivers/iio/adc/Kconfig | 10 +
> drivers/iio/adc/Makefile | 1 +
>drivers/iio/adc/hibvt_lsadc.c | 344
>+++++++++++++++++++++
> 4 files changed, 381 insertions(+)
>create mode 100644
>Documentation/devicetree/bindings/iio/adc/hibvt-lsadc.txt
> create mode 100644 drivers/iio/adc/hibvt_lsadc.c
>
>diff --git a/Documentation/devicetree/bindings/iio/adc/hibvt-lsadc.txt
>b/Documentation/devicetree/bindings/iio/adc/hibvt-lsadc.txt
>new file mode 100644
>index 0000000..63de46e
>--- /dev/null
>+++ b/Documentation/devicetree/bindings/iio/adc/hibvt-lsadc.txt
>@@ -0,0 +1,26 @@
>+Hisilicon BVT Low Speed (LS) A/D Converter bindings
>+
>+Required properties:
>+- compatible: should be "hisilicon,<name>-lsadc"
>+ - "hisilicon,hibvt-lsadc": for hi3516cv300
>+
>+- reg: physical base address of the controller and length of memory
>mapped
>+ region.
>+- interrupts: The interrupt number to the cpu. The interrupt specifier
>format
>+ depends on the interrupt controller.
A cross reference to the interrupt bindings doc always good to add.
>+- #io-channel-cells: Should be 1, see ../iio-bindings.txt
>+
>+Optional properties:
>+- resets: Must contain an entry for each entry in reset-names if need
>support
>+ this option. See ../reset/reset.txt for details.
>+- reset-names: Must include the name "saradc-apb".
>+
>+Example:
>+ lsadc: hibvt-lsadc@120e0000 {
>+ compatible = "hisilicon,hibvt-lsadc";
>+ reg = <0x120e0000 0x1000>;
>+ interrupts = <19>;
>+ resets = <&crg 0x7c 3>;
>+ reset-names = "lsadc-crg";
Doesn't contain saradc-apb which docs say it must...
>+ status = "disabled";
Not documented...
>+ };
>diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index
>99c0514..0443f51 100644
>--- a/drivers/iio/adc/Kconfig
>+++ b/drivers/iio/adc/Kconfig
>@@ -225,6 +225,16 @@ config HI8435
> This driver can also be built as a module. If so, the module will be
> called hi8435.
>
>+config HIBVT_LSADC
>+ tristate "HIBVT LSADC driver"
>+ depends on ARCH_HISI || COMPILE_TEST
>+ help
>+ Say yes here to build support for the LSADC found in SoCs from
>+ hisilicon BVT chip.
>+
>+ To compile this driver as a module, choose M here: the
>+ module will be called hibvt_lsadc.
>+
> config INA2XX_ADC
> tristate "Texas Instruments INA2xx Power Monitors IIO driver"
> depends on I2C && !SENSORS_INA2XX
>diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index
>7a40c04..6554d92 100644
>--- a/drivers/iio/adc/Makefile
>+++ b/drivers/iio/adc/Makefile
>@@ -23,6 +23,7 @@ obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
> obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
> obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o
> obj-$(CONFIG_HI8435) += hi8435.o
>+obj-$(CONFIG_HIBVT_LSADC) += hibvt_lsadc.o
> obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
> obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
> obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o diff --git
>a/drivers/iio/adc/hibvt_lsadc.c b/drivers/iio/adc/hibvt_lsadc.c new
>file mode 100644 index 0000000..a20afe8
>--- /dev/null
>+++ b/drivers/iio/adc/hibvt_lsadc.c
>@@ -0,0 +1,344 @@
>+/*
>+ * Hisilicon BVT Low Speed (LS) A/D Converter
>+ * Copyright (C) 2016 HiSilicon Technologies Co., Ltd.
>+ *
>+ * This program is free software; you can redistribute it and/or
>modify
>+ * it under the terms of the GNU General Public License as published
>by
>+ * the Free Software Foundation; either version 2 of the License, or
>+ * (at your option) any later version.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ */
>+
>+#include <linux/module.h>
>+#include <linux/platform_device.h>
>+#include <linux/interrupt.h>
>+#include <linux/io.h>
>+#include <linux/of.h>
>+#include <linux/of_device.h>
>+#include <linux/clk.h>
>+#include <linux/completion.h>
>+#include <linux/delay.h>
>+#include <linux/reset.h>
>+#include <linux/regulator/consumer.h>
>+#include <linux/iio/iio.h>
>+
>+/* hisilicon bvt adc registers definitions */
>+#define LSADC_CONFIG 0x00
>+#define CONFIG_DEGLITCH BIT(17)
Please add a driver specific prefix to all defines to keep them in their own namespace.
>+#define CONFIG_RESET BIT(15)
>+#define CONFIG_POWERDOWN BIT(14)
>+#define CONFIG_MODE BIT(13)
>+#define CONFIG_CHC_VALID BIT(10)
>+#define CONFIG_CHB_VALID BIT(9)
>+#define CONFIG_CHA_VALID BIT(8)
>+
>+#define LSADC_TIMESCAN 0x08
Lsadc is perhaps to generic a prefix. Clash chances are a bit high
>+#define LSADC_INTEN 0x10
>+#define LSADC_INTSTATUS 0x14
>+#define LSADC_INTCLR 0x18
>+#define LSADC_START 0x1C
>+#define LSADC_STOP 0x20
>+#define LSADC_ACTBIT 0x24
>+#define LSADC_CHNDATA 0x2C
>+
>+#define ADC_CON_EN (1u << 0)
>+#define ADC_CON_DEN (0u << 0)
>+
>+#define ADC_NUM_BITS 10
>+
>+/* fix clk:3000000, default tscan set 10ms */
>+#define DEF_ADC_TSCAN_MS (10*3000)
>+
>+#define LSADC_CHN_MASK 0x7
>+
>+#define LSADC_TIMEOUT msecs_to_jiffies(100)
>+
>+/* default voltage scale for every channel <mv> */ static int
>+g_voltage[] = {
>+ 3300, 3300, 3300
>+};
Prefix these as well.
>+
>+struct hibvt_lsadc {
>+ void __iomem *regs;
>+ struct completion completion;
>+ struct reset_control *reset;
>+ const struct hibvt_lsadc_data *data;
>+ unsigned int cur_chn;
>+ unsigned int value;
>+};
>+
>+struct hibvt_lsadc_data {
>+ int num_bits;
>+ const struct iio_chan_spec *channels;
>+ int num_channels;
>+
>+ void (*clear_irq)(struct hibvt_lsadc *info, int mask);
>+ void (*start_conv)(struct hibvt_lsadc *info);
>+ void (*stop_conv)(struct hibvt_lsadc *info); };
>+
>+static int hibvt_lsadc_read_raw(struct iio_dev *indio_dev,
>+ struct iio_chan_spec const *chan,
>+ int *val, int *val2, long mask) {
>+ struct hibvt_lsadc *info = iio_priv(indio_dev);
>+
>+ switch (mask) {
>+ case IIO_CHAN_INFO_RAW:
>+ mutex_lock(&indio_dev->mlock);
>+
>+ reinit_completion(&info->completion);
>+
>+ /* Select the channel to be used */
>+ info->cur_chn = chan->channel;
>+
>+ if (info->data->start_conv)
>+ info->data->start_conv(info);
>+
>+ if (!wait_for_completion_timeout(&info->completion,
>+ LSADC_TIMEOUT)) {
>+ if (info->data->stop_conv)
>+ info->data->stop_conv(info);
>+ mutex_unlock(&indio_dev->mlock);
>+ return -ETIMEDOUT;
>+ }
>+
>+ *val = info->value;
>+ mutex_unlock(&indio_dev->mlock);
>+ return IIO_VAL_INT;
>+ case IIO_CHAN_INFO_SCALE:
>+ *val = g_voltage[chan->channel];
>+ *val2 = info->data->num_bits;
>+ return IIO_VAL_FRACTIONAL_LOG2;
>+ default:
>+ return -EINVAL;
>+ }
>+}
>+
>+static irqreturn_t hibvt_lsadc_isr(int irq, void *dev_id) {
>+ struct hibvt_lsadc *info = (struct hibvt_lsadc *)dev_id;
>+ int mask;
>+
>+ mask = readl(info->regs + LSADC_INTSTATUS);
>+ mask &= LSADC_CHN_MASK;
>+
>+ /* Clear irq */
>+ if (info->data->clear_irq)
>+ info->data->clear_irq(info, mask);
>+
>+ /* Read value */
>+ info->value = readl(info->regs + LSADC_CHNDATA + (info->cur_chn <<
>2));
>+ info->value &= GENMASK(info->data->num_bits - 1, 0);
>+
>+ /* stop adc */
>+ if (info->data->stop_conv)
>+ info->data->stop_conv(info);
>+
>+ complete(&info->completion);
>+
>+ return IRQ_HANDLED;
>+}
>+
>+static const struct iio_info hibvt_lsadc_iio_info = {
>+ .read_raw = hibvt_lsadc_read_raw,
>+ .driver_module = THIS_MODULE,
>+};
>+
>+#define ADC_CHANNEL(_index, _id) { \
Prefix this define.
>+ .type = IIO_VOLTAGE, \
>+ .indexed = 1, \
>+ .channel = _index, \
>+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
>+ BIT(IIO_CHAN_INFO_SCALE), \
>+ .datasheet_name = _id, \
>+}
>+
>+static const struct iio_chan_spec hibvt_lsadc_iio_channels[] = {
>+ ADC_CHANNEL(0, "adc0"),
>+ ADC_CHANNEL(1, "adc1"),
>+ ADC_CHANNEL(2, "adc2"),
>+};
>+
>+static void hibvt_lsadc_clear_irq(struct hibvt_lsadc *info, int mask)
>+{
>+ writel(mask, info->regs + LSADC_INTCLR); }
>+
>+static void hibvt_lsadc_start_conv(struct hibvt_lsadc *info) {
>+ unsigned int con;
>+
>+ /* set number bit */
>+ con = GENMASK(info->data->num_bits - 1, 0);
>+ writel(con, (info->regs + LSADC_ACTBIT));
>+
>+ /* config */
>+ con = readl(info->regs + LSADC_CONFIG);
>+ con &= ~CONFIG_RESET;
>+ con |= (CONFIG_POWERDOWN | CONFIG_DEGLITCH | CONFIG_MODE);
>+ con &= ~(CONFIG_CHA_VALID | CONFIG_CHB_VALID | CONFIG_CHC_VALID);
>+ con |= (CONFIG_CHA_VALID << info->cur_chn);
>+ writel(con, (info->regs + LSADC_CONFIG));
>+
>+ /* set timescan */
>+ writel(DEF_ADC_TSCAN_MS, (info->regs + LSADC_TIMESCAN));
>+
>+ /* clear interrupt */
>+ writel(LSADC_CHN_MASK, info->regs + LSADC_INTCLR);
>+
>+ /* enable interrupt */
>+ writel(ADC_CON_EN, (info->regs + LSADC_INTEN));
>+
>+ /* start scan */
>+ writel(ADC_CON_EN, (info->regs + LSADC_START)); }
>+
>+static void hibvt_lsadc_stop_conv(struct hibvt_lsadc *info) {
>+ /* reset the timescan */
>+ writel(ADC_CON_DEN, (info->regs + LSADC_TIMESCAN));
>+
>+ /* disable interrupt */
>+ writel(ADC_CON_DEN, (info->regs + LSADC_INTEN));
>+
>+ /* stop scan */
>+ writel(ADC_CON_EN, (info->regs + LSADC_STOP)); }
>+
>+static const struct hibvt_lsadc_data lsadc_data = {
>+ .num_bits = ADC_NUM_BITS,
>+ .channels = hibvt_lsadc_iio_channels,
>+ .num_channels = ARRAY_SIZE(hibvt_lsadc_iio_channels),
>+
>+ .clear_irq = hibvt_lsadc_clear_irq,
>+ .start_conv = hibvt_lsadc_start_conv,
>+ .stop_conv = hibvt_lsadc_stop_conv,
>+};
Usual convention is to only introduce a device type specific structure when more than one device is supported. If you are going to follow up shortly with more device support then leave it but add a note to the patch description. If not please drop this abstraction.
>+
>+static const struct of_device_id hibvt_lsadc_match[] = {
>+ {
>+ .compatible = "hisilicon,hibvt-lsadc",
>+ .data = &lsadc_data,
>+ },
>+ {},
>+};
>+MODULE_DEVICE_TABLE(of, hibvt_lsadc_match);
>+
>+/**
>+ * Reset LSADC Controller.
Single line comment syntax please.
>+ */
>+static void hibvt_lsadc_reset_controller(struct reset_control *reset)
>+{
>+ reset_control_assert(reset);
>+ usleep_range(10, 20);
>+ reset_control_deassert(reset);
>+}
>+
>+static int hibvt_lsadc_probe(struct platform_device *pdev) {
>+ struct hibvt_lsadc *info = NULL;
>+ struct device_node *np = pdev->dev.of_node;
>+ struct iio_dev *indio_dev = NULL;
>+ struct resource *mem;
>+ const struct of_device_id *match;
>+ int ret;
>+ int irq;
>+
>+ if (!np)
>+ return -ENODEV;
>+
>+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
>+ if (!indio_dev) {
>+ dev_err(&pdev->dev, "failed allocating iio device\n");
>+ return -ENOMEM;
>+ }
>+ info = iio_priv(indio_dev);
>+
>+ match = of_match_device(hibvt_lsadc_match, &pdev->dev);
>+ info->data = match->data;
>+
>+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>+ info->regs = devm_ioremap_resource(&pdev->dev, mem);
>+ if (IS_ERR(info->regs))
>+ return PTR_ERR(info->regs);
>+
>+ /*
>+ * The reset should be an optional property, as it should work
>+ * with old devicetrees as well
>+ */
>+ info->reset = devm_reset_control_get(&pdev->dev, "lsadc-crg");
>+ if (IS_ERR(info->reset)) {
>+ ret = PTR_ERR(info->reset);
>+ if (ret != -ENOENT)
>+ return ret;
>+
>+ dev_dbg(&pdev->dev, "no reset control found\n");
>+ info->reset = NULL;
>+ }
>+
>+ init_completion(&info->completion);
>+
>+ irq = platform_get_irq(pdev, 0);
>+ if (irq < 0) {
>+ dev_err(&pdev->dev, "no irq resource?\n");
>+ return irq;
>+ }
>+
>+ ret = devm_request_irq(&pdev->dev, irq, hibvt_lsadc_isr,
>+ 0, dev_name(&pdev->dev), info);
>+ if (ret < 0) {
>+ dev_err(&pdev->dev, "failed requesting irq %d\n", irq);
>+ return ret;
>+ }
>+
>+ if (info->reset)
>+ hibvt_lsadc_reset_controller(info->reset);
>+
>+ platform_set_drvdata(pdev, indio_dev);
>+
>+ indio_dev->name = dev_name(&pdev->dev);
>+ indio_dev->dev.parent = &pdev->dev;
>+ indio_dev->dev.of_node = pdev->dev.of_node;
>+ indio_dev->info = &hibvt_lsadc_iio_info;
>+ indio_dev->modes = INDIO_DIRECT_MODE;
>+
>+ indio_dev->channels = info->data->channels;
>+ indio_dev->num_channels = info->data->num_channels;
>+
>+ ret = iio_device_register(indio_dev);
>+ if (ret < 0) {
>+ dev_err(&pdev->dev, "failed register iio device\n");
>+ return ret;
>+ }
>+
>+ return 0;
>+}
>+
>+static int hibvt_lsadc_remove(struct platform_device *pdev) {
>+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>+
>+ iio_device_unregister(indio_dev);
As nothing else here can use devm version of register and drop remove entirely.
>+
>+ return 0;
>+}
>+
>+static struct platform_driver hibvt_lsadc_driver = {
>+ .probe = hibvt_lsadc_probe,
>+ .remove = hibvt_lsadc_remove,
>+ .driver = {
>+ .name = "hibvt-lsadc",
>+ .of_match_table = hibvt_lsadc_match,
>+ },
>+};
>+
>+module_platform_driver(hibvt_lsadc_driver);
>+
>+MODULE_AUTHOR("Allen Liu <liurenzhong@hisilicon.com>");
>+MODULE_DESCRIPTION("hisilicon BVT LSADC driver"); MODULE_LICENSE("GPL
>+v2");
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
^ permalink raw reply
* Re: [PATCH v3 2/4] dt-bindings: add bindings for rk3328 clock controller
From: Heiko Stuebner @ 2016-12-26 11:13 UTC (permalink / raw)
To: Elaine Zhang
Cc: mturquette, sboyd, xf, robh+dt, mark.rutland, linux-clk, huangtao,
xxx, cl, linux-rockchip, linux-kernel, devicetree,
linux-arm-kernel
In-Reply-To: <1482723930-5876-3-git-send-email-zhangqing@rock-chips.com>
Hi Elaine,
Am Montag, 26. Dezember 2016, 11:45:28 CET schrieb Elaine Zhang:
> Add devicetree bindings for Rockchip cru which found on
> Rockchip SoCs.
>
> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
> ---
> .../bindings/clock/rockchip,rk3328-cru.txt | 57
> ++++++++++++++++++++++ 1 file changed, 57 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
> b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt new file
> mode 100644
> index 000000000000..20053494d49f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
> @@ -0,0 +1,57 @@
> +* Rockchip RK3328 Clock and Reset Unit
> +
> +The RK3328 clock controller generates and supplies clock to various
> +controllers within the SoC and also implements a reset controller for SoC
> +peripherals.
> +
> +Required Properties:
> +
> +- compatible: should be "rockchip,rk3328-cru"
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- #clock-cells: should be 1.
> +- #reset-cells: should be 1.
> +
> +Optional Properties:
> +
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> + If missing pll rates are not changeable, due to the missing pll lock
> status. +
> +Each clock is assigned an identifier and client nodes can use this
> identifier +to specify the clock which they consume. All available clocks
> are defined as +preprocessor macros in the dt-bindings/clock/rk3328-cru.h
> headers and can be +used in device tree sources. Similar macros exist for
> the reset sources in +these files.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is expected
> +that they are defined using standard clock bindings with following
> +clock-output-names:
> + - "xin24m" - crystal input - required,
> + - "clkin_i2s" - external I2S clock - optional,
> + - "gmac_clkin" - external GMAC clock - optional
> + - "phy_50m_out" - output clock of the pll in the mac phy
> +
> +Example: Clock controller node:
> +
> + cru: clock-controller@ff440000 {
> + compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
Rob suggested dropping the "rockchip,cru" and "syscon" properties from the
example and I definitly agree with that.
Otherwise look ok to me.
Heiko
^ permalink raw reply
* Re: [PATCH v3 4/4] clk: rockchip: add new pll-type for rk3328
From: Heiko Stuebner @ 2016-12-26 11:17 UTC (permalink / raw)
To: Elaine Zhang
Cc: mturquette-rdvid1DuHRBWk0Htik3J/w, sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
xf-TNX95d0MmH7DzftRWevZcw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, linux-clk-u79uwXL29TY76Z2rM5mHXA,
huangtao-TNX95d0MmH7DzftRWevZcw, xxx-TNX95d0MmH7DzftRWevZcw,
cl-TNX95d0MmH7DzftRWevZcw,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <1482723930-5876-5-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Am Montag, 26. Dezember 2016, 11:45:30 CET schrieb Elaine Zhang:
> The rk3328's pll and clock are similar with rk3036's,
> it different with pll_mode_mask, the rk3328 soc
> pll mode only one bit(rk3036 soc have two bits)
> so these should be independent and separate from
> the series of rk3328s.
>
> Changes in v3:
> fix up the pll type pll_rk3328 description and use
>
> Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
pll-specific code looks good now, but please make this patch before the clock
controller in the series and move the
@@ -130,6 +152,7 @@
enum rockchip_pll_type {
pll_rk3036,
pll_rk3066,
+ pll_rk3328,
pll_rk3399,
};
from patch3 into this one.
Thanks
Heiko
PS: I will have some comments for the clock controller patch, but it's xmas,
so that may take bit still.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [RFC PATCH 4/6] PCI: exynos5433: Add new exynos pci host controller for Exynos5433
From: Joao Pinto @ 2016-12-26 11:49 UTC (permalink / raw)
To: Jaehoon Chung, linux-pci-u79uwXL29TY76Z2rM5mHXA
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
bhelgaas-hpIqsD4AKlfQT0dZR+AlfA, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, kgene-DgEjT+Ai2ygdnm+yROfE0A,
krzk-DgEjT+Ai2ygdnm+yROfE0A, javier-JPH+aEBZ4P+UEJcrhfAQsw,
kishon-l0cyMroinI0, will.deacon-5wv7dgnIgG8,
catalin.marinas-5wv7dgnIgG8, cpgs-Sze3O3UU22JBDgjK7y7TUQ
In-Reply-To: <20161226052029.10552-5-jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Hello Jaehoon,
Às 5:20 AM de 12/26/2016, Jaehoon Chung escreveu:
> Exynos5433 supports the PCIe.
> This patch adds new pci-exynos5433.c file for Exynos ARM64.
>
> Signed-off-by: Jaehoon Chung <jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
> drivers/pci/host/Kconfig | 9 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pci-exynos5433.c | 338 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 348 insertions(+)
> create mode 100644 drivers/pci/host/pci-exynos5433.c
>
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index d7e7c0a..3d77d0b 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -60,6 +60,15 @@ config PCI_EXYNOS
> select PCIEPORTBUS
> select PCIE_DW
>
> +config PCI_EXYNOS5433
> + bool "Samsung Exynos5433 PCIe controller"
> + depends on ARCH_EXYNOS && ARM64
> + depends on PCI_MSI_IRQ_DOMAIN
> + select PCIEPORTBUS
> + select PCIE_DW
> + help
> + If you want support for Exynos5433 PCIe host controller, say Y.
> +
> config PCI_IMX6
> bool "Freescale i.MX6 PCIe controller"
> depends on SOC_IMX6Q
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 084cb49..2168de2 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -2,6 +2,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o
> obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
> obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
> obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> +obj-$(CONFIG_PCI_EXYNOS5433) += pci-exynos5433.o
> obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
> obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
> diff --git a/drivers/pci/host/pci-exynos5433.c b/drivers/pci/host/pci-exynos5433.c
> new file mode 100644
> index 0000000..ff254ca
> --- /dev/null
> +++ b/drivers/pci/host/pci-exynos5433.c
> @@ -0,0 +1,338 @@
> +/*
> + * PCIe host controller driver for Samsung EXYNOS5433 SoCs
> + *
> + * Copyright (C) 2016 Samsung Electronics Co., Ltd.
> + * https://urldefense.proofpoint.com/v2/url?u=http-3A__www.samsung.com&d=DgIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=s2fO0hii0OGNOv9qQy_HRXy-xAJUD1NNoEcc3io_kx0&m=fUwnZks1U2AwaOxMkLdSnE700sfQXpB3WAg_EJw7NaE&s=IwRYD8maTuXG57Q0qlAmFNh3_TSfUTE27xq8p13FFKI&e=
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/gpio.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/resource.h>
> +#include <linux/signal.h>
> +#include <linux/types.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/phy/phy.h>
> +
> +#include "pcie-designware.h"
> +
> +#define to_exynos_pcie(x) container_of(x, struct exynos_pcie, pp)
> +
> +/* Pcie structure for Exynos specific data */
> +struct exynos_pcie {
> + void __iomem *elbi_base;
> + struct clk *clk;
> + struct clk *bus_clk;
> + struct pcie_port pp;
> + struct phy *phy;
> +};
> +
> +/* PCIe ELBI registers */
> +#define PCIE_IRQ_PULSE 0x000
> +#define IRQ_INTA_ASSERT BIT(0)
> +#define IRQ_INTB_ASSERT BIT(2)
> +#define IRQ_INTC_ASSERT BIT(4)
> +#define IRQ_INTD_ASSERT BIT(6)
> +#define IRQ_INTX_ASSERT (IRQ_INTA_ASSERT | IRQ_INTB_ASSERT | \
> + IRQ_INTC_ASSERT | IRQ_INTD_ASSERT)
> +#define PCIE_IRQ_EN_PULSE 0x00c
> +#define PCIE_IRQ_EN_LEVEL 0x010
> +#define PCIE_SW_WAKE 0x018
> +#define PCIE_BUS_EN BIT(1)
> +#define PCIE_APP_LTSSM_ENABLE 0x02c
> +#define PCIE_ELBI_LTSSM_ENABLE 0x1
> +#define PCIE_ELBI_DEBUG_L 0x074
> +#define PCIE_ELBI_XMLH_LINK_UP BIT(4)
> +#define PCIE_ELBI_SLV_AWMISC 0x11c
> +#define PCIE_ELBI_SLV_ARMISC 0x120
> +#define PCIE_ELBI_SLV_DBI_ENABLE BIT(21)
> +
> +/* DBI register */
> +#define PCIE_MISC_CONTROL_1_OFF 0x8BC
> +#define DBI_RO_WR_EN BIT(0)
> +
> +static inline void exynos_pcie_writel(void __iomem *base, u32 val, u32 offset)
> +{
> + writel(val, base + offset);
> +}
> +
> +static inline u32 exynos_pcie_readl(void __iomem *base, u32 offset)
> +{
> + return readl(base + offset);
> +}
> +
> +static void exynos_pcie_clear_irq_pulse(struct exynos_pcie *ep)
> +{
> + u32 val;
> +
> + val = exynos_pcie_readl(ep->elbi_base, PCIE_IRQ_PULSE);
> + val &= ~IRQ_INTX_ASSERT;
> + exynos_pcie_writel(ep->elbi_base, val, PCIE_IRQ_PULSE);
> +}
> +
> +static void exynos_pcie_enable_irq_pulse(struct exynos_pcie *ep)
> +{
> + exynos_pcie_writel(ep->elbi_base, IRQ_INTX_ASSERT, PCIE_IRQ_EN_PULSE);
> +
> + /* Clear PCIE_IRQ_EN_LEVEL register */
> + exynos_pcie_writel(ep->elbi_base, 0, PCIE_IRQ_EN_LEVEL);
> +}
> +
> +static irqreturn_t exynos_pcie_irq_handler(int irq, void *arg)
> +{
> + struct pcie_port *pp = arg;
> + struct exynos_pcie *ep = to_exynos_pcie(pp);
> +
> + exynos_pcie_clear_irq_pulse(ep);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void exynos_pcie_sideband_dbi_w_mode(struct exynos_pcie *ep, bool on)
> +{
> + u32 val;
> +
> + val = exynos_pcie_readl(ep->elbi_base, PCIE_ELBI_SLV_AWMISC);
> + if (on)
> + val |= PCIE_ELBI_SLV_DBI_ENABLE;
> + else
> + val &= ~PCIE_ELBI_SLV_DBI_ENABLE;
> + exynos_pcie_writel(ep->elbi_base, val, PCIE_ELBI_SLV_AWMISC);
> +}
> +
> +static void exynos_pcie_sideband_dbi_r_mode(struct exynos_pcie *ep, bool on)
> +{
> + u32 val;
> +
> + val = exynos_pcie_readl(ep->elbi_base, PCIE_ELBI_SLV_ARMISC);
> + if (on)
> + val |= PCIE_ELBI_SLV_DBI_ENABLE;
> + else
> + val &= ~PCIE_ELBI_SLV_DBI_ENABLE;
> + exynos_pcie_writel(ep->elbi_base, val, PCIE_ELBI_SLV_ARMISC);
> +}
> +
> +static int exynos_pcie_establish_link(struct exynos_pcie *ep)
> +{
> + struct pcie_port *pp = &ep->pp;
> + u32 val;
> +
> + if (dw_pcie_link_up(pp)) {
> + dev_info(pp->dev, "Link already up\n");
> + return 0;
> + }
> +
> + phy_power_on(ep->phy);
> +
> + /* Exynos Pcie assert PHY reset and init */
> + phy_init(ep->phy);
> +
> + val = exynos_pcie_readl(ep->elbi_base, PCIE_SW_WAKE);
> + val &= ~PCIE_BUS_EN;
> + exynos_pcie_writel(ep->elbi_base, val, PCIE_SW_WAKE);
> +
> + /*
> + * Enable DBI_RO_WR_EN bit.
> + * - When set to 1, some RO and HWinit bits are wriatble from
> + * the local application through the DBI.
> + */
> + dw_pcie_writel_rc(pp, PCIE_MISC_CONTROL_1_OFF, DBI_RO_WR_EN);
> +
> + /* Setup root complex */
> + dw_pcie_setup_rc(pp);
> +
> + /* assert LTSSM enable */
> + exynos_pcie_writel(ep->elbi_base, PCIE_ELBI_LTSSM_ENABLE,
> + PCIE_APP_LTSSM_ENABLE);
> +
> + return dw_pcie_wait_for_link(pp);
> +}
> +
> +
> +static int exynos_pcie_link_up(struct pcie_port *pp)
> +{
> + struct exynos_pcie *ep = to_exynos_pcie(pp);
> + u32 val;
> +
> + /* Check the Receive Transaction Layer Handler */
> + val = exynos_pcie_readl(ep->elbi_base, PCIE_ELBI_DEBUG_L);
> +
> + return (val & PCIE_ELBI_XMLH_LINK_UP);
> +}
> +
> +static void exynos_pcie_host_init(struct pcie_port *pp)
> +{
> + struct exynos_pcie *ep = to_exynos_pcie(pp);
> +
> + exynos_pcie_enable_irq_pulse(ep);
> + exynos_pcie_establish_link(ep);
> +}
Your *_host_init callback should return to pci-designware its error/success
status. There is a recent patch that added this capability to all vendor
specific drivers that use pcie-designware. Please check it out and follow the
same approach:
https://patchwork.kernel.org/patch/9464223/
Thanks,
Joao
> +
> +static u32 exynos_pcie_readl_rc(struct pcie_port *pp, u32 reg)
> +{
> + struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp);
> + u32 val;
> +
> + exynos_pcie_sideband_dbi_r_mode(exynos_pcie, true);
> + val = readl(pp->dbi_base + reg);
> + exynos_pcie_sideband_dbi_r_mode(exynos_pcie, false);
> + return val;
> +}
> +
> +static void exynos_pcie_writel_rc(struct pcie_port *pp, u32 reg, u32 val)
> +{
> + struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp);
> +
> + exynos_pcie_sideband_dbi_w_mode(exynos_pcie, true);
> + writel(val, pp->dbi_base + reg);
> + exynos_pcie_sideband_dbi_w_mode(exynos_pcie, false);
> +}
> +
> +static int exynos_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
> + u32 *val)
> +{
> + struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp);
> + int ret;
> +
> + exynos_pcie_sideband_dbi_r_mode(exynos_pcie, true);
> + ret = dw_pcie_cfg_read(pp->dbi_base + where, size, val);
> + exynos_pcie_sideband_dbi_r_mode(exynos_pcie, false);
> + return ret;
> +}
> +
> +static int exynos_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
> + u32 val)
> +{
> + struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp);
> + int ret;
> +
> + exynos_pcie_sideband_dbi_w_mode(exynos_pcie, true);
> + ret = dw_pcie_cfg_write(pp->dbi_base + where, size, val);
> + exynos_pcie_sideband_dbi_w_mode(exynos_pcie, false);
> + return ret;
> +}
> +
> +static struct pcie_host_ops exynos_pcie_host_ops = {
> + .readl_rc = exynos_pcie_readl_rc,
> + .writel_rc = exynos_pcie_writel_rc,
> + .rd_own_conf = exynos_pcie_rd_own_conf,
> + .wr_own_conf = exynos_pcie_wr_own_conf,
> + .host_init = exynos_pcie_host_init,
> + .link_up = exynos_pcie_link_up,
> +};
> +
> +static int __init exynos_pcie_probe(struct platform_device *pdev)
> +{
> + struct exynos_pcie *exynos_pcie;
> + struct pcie_port *pp;
> + struct resource *res;
> + int ret;
> +
> + exynos_pcie = devm_kzalloc(&pdev->dev, sizeof(*exynos_pcie),
> + GFP_KERNEL);
> + if (!exynos_pcie)
> + return -ENOMEM;
> +
> + pp = &exynos_pcie->pp;
> + pp->dev = &pdev->dev;
> +
> + exynos_pcie->clk = devm_clk_get(&pdev->dev, "pcie");
> + if (IS_ERR(exynos_pcie->clk)) {
> + dev_err(&pdev->dev, "Failed to get pcie rc clock\n");
> + return PTR_ERR(exynos_pcie->clk);
> + }
> + ret = clk_prepare_enable(exynos_pcie->clk);
> + if (ret)
> + return ret;
> +
> + exynos_pcie->bus_clk = devm_clk_get(&pdev->dev, "pcie_bus");
> + if (IS_ERR(exynos_pcie->bus_clk)) {
> + dev_err(&pdev->dev, "Failed to get pcie bus clock\n");
> + ret = PTR_ERR(exynos_pcie->bus_clk);
> + goto fail_clk;
> + }
> + ret = clk_prepare_enable(exynos_pcie->bus_clk);
> + if (ret)
> + goto fail_clk;
> +
> + /* External Local Bus interface(ELBI) Register */
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
> + exynos_pcie->elbi_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(exynos_pcie->elbi_base)) {
> + ret = PTR_ERR(exynos_pcie->elbi_base);
> + goto fail_bus_clk;
> + }
> +
> + /* Data Bus Interface(DBI) Register */
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
> + pp->dbi_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(pp->dbi_base)) {
> + ret = PTR_ERR(pp->dbi_base);
> + goto fail_bus_clk;
> + }
> +
> + exynos_pcie->phy = devm_phy_get(&pdev->dev, "pcie-phy");
> + if (IS_ERR(exynos_pcie->phy)) {
> + if (PTR_ERR(exynos_pcie->phy) != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Can't find the pcie-phy\n");
> + return PTR_ERR(exynos_pcie->phy);
> + }
> +
> + pp->irq = platform_get_irq_byname(pdev, "intr");
> + if (!pp->irq) {
> + dev_err(&pdev->dev, "failed to get irq\n");
> + ret = -ENODEV;
> + goto fail_bus_clk;
> + }
> + ret = devm_request_irq(&pdev->dev, pp->irq, exynos_pcie_irq_handler,
> + IRQF_SHARED, "exynos-pcie", exynos_pcie);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to request irq\n");
> + goto fail_bus_clk;
> + }
> +
> + pp->root_bus_nr = -1;
> + pp->ops = &exynos_pcie_host_ops;
> +
> + ret = dw_pcie_host_init(pp);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to initialize host\n");
> + goto fail_bus_clk;
> + }
> +
> + platform_set_drvdata(pdev, exynos_pcie);
> +
> + return 0;
> +
> +fail_bus_clk:
> + clk_disable_unprepare(exynos_pcie->bus_clk);
> +fail_clk:
> + clk_disable_unprepare(exynos_pcie->clk);
> + return ret;
> +}
> +
> +static const struct of_device_id exynos_pcie_of_match[] = {
> + { .compatible = "samsung,exynos5433-pcie", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, exynos_pcie_of_match);
> +
> +static struct platform_driver exynos_pcie_driver = {
> + .probe = exynos_pcie_probe,
> + .driver = {
> + .name = "exynos5433-pcie",
> + .of_match_table = exynos_pcie_of_match,
> + },
> +};
> +builtin_platform_driver(exynos_pcie_driver);
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v2] power: reset: add linkstation-reset driver
From: Roger Shimizu @ 2016-12-26 16:13 UTC (permalink / raw)
To: Sebastian Reichel
Cc: Andrew Lunn, Rob Herring, linux-pm, Ryan Tandy, Martin Michlmayr,
Sylver Bruneau, Herbert Valerio Riedel, Mark Rutland, devicetree
In-Reply-To: <20161222144924.gidgzk2ujpvlti3t@earth>
Dear Sebastian,
Thanks for your feedback!
On Thu, Dec 22, 2016 at 11:49 PM, Sebastian Reichel <sre@kernel.org> wrote:
>
> I'm talking about the special case, where it also sends only a
> single byte:
>
>> + /* send the power-off command to PIC */
>> + if(cfg->cmd[0][0] == 1 && cfg->cmd[1][0] == 0) {
>> + /* if it's simply one-byte command, send it directly */
>> + writel(cfg->cmd[0][1], UART1_REG(TX));
>> + }
>
> The configuration is different, but
>
> a) probably it can just use the config from the qnap driver, since
> it just sends a single byte.
> b) making the 4 config registers configurable in the qnap driver does
> not add much complexity.
>
> So this case should be removed from the linkstation-reset driver. If
> any board needs it, it should use the qnap-poweroff driver instead.
Yes, if other board need sending one-byte command to UART1, it should
make use of qnap-poweroff driver.
However, one model of Linkstation need such kind of command, I would
like to add it in linkstation-reset driver.
Currently, there's no such usage, so if you don't like the redundant
code which sending one-byte command, I can remove in my next patch
series.
Merry Xmas and happy new year!
Cheers,
--
Roger Shimizu, GMT +9 Tokyo
PGP/GPG: 4096R/6C6ACD6417B3ACB1
^ permalink raw reply
* [PATCH 0/6] Allwinner H5 and Xunlong Orange Pi PC 2 support
From: Icenowy Zheng @ 2016-12-26 16:25 UTC (permalink / raw)
To: Linus Walleij, Chen-Yu Tsai, Maxime Ripard, Rob Herring,
Andre Przywara
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
This patchset imports two necessary patches for Allwinner H5: CCU driver and
the pinctrl driver, both are based on the H3 ones.
Some patches of H5 dtsi file are directly taken from Andre Przywara's kernel
tree, but did more cleanup.
The Orange Pi PC 2 dtsi file is also taken there.
^ permalink raw reply
* [PATCH 1/6] drivers: pinctrl: add driver for Allwinner H5 SoC
From: Icenowy Zheng @ 2016-12-26 16:25 UTC (permalink / raw)
To: Linus Walleij, Chen-Yu Tsai, Maxime Ripard, Rob Herring,
Andre Przywara
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA, Icenowy Zheng
In-Reply-To: <20161226162518.5367-1-icenowy-ymACFijhrKM@public.gmane.org>
Based on the Allwinner H5 datasheet and the pinctrl driver of the
backward-compatible H3 this introduces the pin multiplex assignments for
the H5 SoC.
H5 introduced some more pin functions (e.g. three more groups of TS
pins, and one more groups of SIM pins) than H3.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
.../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 +
drivers/pinctrl/sunxi/Kconfig | 4 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c | 551 +++++++++++++++++++++
4 files changed, 557 insertions(+)
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index c931fb1c01a6..2fd688c8dbdb 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -23,6 +23,7 @@ Required properties:
"allwinner,sun8i-h3-pinctrl"
"allwinner,sun8i-h3-r-pinctrl"
"allwinner,sun50i-a64-pinctrl"
+ "allwinner,sun50i-h5-r-pinctrl"
"nextthing,gr8-pinctrl"
- reg: Should contain the register physical address and length for the
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index bff1ffc6f01e..e9c47e8b2ee0 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -76,4 +76,8 @@ config PINCTRL_SUN50I_A64
bool
select PINCTRL_SUNXI
+config PINCTRL_SUN50I_H5
+ bool
+ select PINCTRL_SUNXI
+
endif
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index 95f93d0561fc..bab215d25440 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -17,5 +17,6 @@ obj-$(CONFIG_PINCTRL_SUN50I_A64) += pinctrl-sun50i-a64.o
obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o
obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o
obj-$(CONFIG_PINCTRL_SUN8I_H3_R) += pinctrl-sun8i-h3-r.o
+obj-$(CONFIG_PINCTRL_SUN50I_H5) += pinctrl-sun50i-h5.o
obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o
obj-$(CONFIG_PINCTRL_SUN9I_A80_R) += pinctrl-sun9i-a80-r.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c
new file mode 100644
index 000000000000..67a55df37782
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c
@@ -0,0 +1,551 @@
+/*
+ * Allwinner H5 SoC pinctrl driver.
+ *
+ * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * Based on pinctrl-sun8i-h3.c, which is:
+ * Copyright (C) 2015 Jens Kuske <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * Based on pinctrl-sun8i-a23.c, which is:
+ * Copyright (C) 2014 Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
+ * Copyright (C) 2014 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun50i_h5_pins[] = {
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart2"), /* TX */
+ SUNXI_FUNCTION(0x3, "jtag"), /* MS */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PA_EINT0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart2"), /* RX */
+ SUNXI_FUNCTION(0x3, "jtag"), /* CK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PA_EINT1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart2"), /* RTS */
+ SUNXI_FUNCTION(0x3, "jtag"), /* DO */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PA_EINT2 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart2"), /* CTS */
+ SUNXI_FUNCTION(0x3, "jtag"), /* DI */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PA_EINT3 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart0"), /* TX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PA_EINT4 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart0"), /* RX */
+ SUNXI_FUNCTION(0x3, "pwm0"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PA_EINT5 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "sim"), /* PWREN */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PA_EINT6 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 7),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "sim"), /* CLK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PA_EINT7 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "sim"), /* DATA */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PA_EINT8 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "sim"), /* RST */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PA_EINT9 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 10),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "sim"), /* DET */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)), /* PA_EINT10 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 11),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */
+ SUNXI_FUNCTION(0x3, "di"), /* TX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)), /* PA_EINT11 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 12),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2c0"), /* SDA */
+ SUNXI_FUNCTION(0x3, "di"), /* RX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 12)), /* PA_EINT12 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 13),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "spi1"), /* CS */
+ SUNXI_FUNCTION(0x3, "uart3"), /* TX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 13)), /* PA_EINT13 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 14),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "spi1"), /* CLK */
+ SUNXI_FUNCTION(0x3, "uart3"), /* RX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)), /* PA_EINT14 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 15),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "spi1"), /* MOSI */
+ SUNXI_FUNCTION(0x3, "uart3"), /* RTS */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 15)), /* PA_EINT15 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 16),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "spi1"), /* MISO */
+ SUNXI_FUNCTION(0x3, "uart3"), /* CTS */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 16)), /* PA_EINT16 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 17),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "spdif"), /* OUT */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 17)), /* PA_EINT17 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 18),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2s0"), /* SYNC */
+ SUNXI_FUNCTION(0x3, "i2c1"), /* SCK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 18)), /* PA_EINT18 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 19),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2s0"), /* CLK */
+ SUNXI_FUNCTION(0x3, "i2c1"), /* SDA */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 19)), /* PA_EINT19 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 20),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2s0"), /* DOUT */
+ SUNXI_FUNCTION(0x3, "sim"), /* VPPEN */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 20)), /* PA_EINT20 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 21),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2s0"), /* DIN */
+ SUNXI_FUNCTION(0x3, "sim"), /* VPPPP */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 21)), /* PA_EINT21 */
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* WE */
+ SUNXI_FUNCTION(0x3, "spi0")), /* MOSI */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* ALE */
+ SUNXI_FUNCTION(0x3, "spi0"), /* MISO */
+ SUNXI_FUNCTION(0x4, "mmc2")), /* DS */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* CLE */
+ SUNXI_FUNCTION(0x3, "spi0")), /* CLK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* CE1 */
+ SUNXI_FUNCTION(0x3, "spi0")), /* CS */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* CE0 */
+ SUNXI_FUNCTION(0x4, "spi0")), /* MISO */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* RE */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* CLK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* RB0 */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* CMD */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 7),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0")), /* RB1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ0 */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* D0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ1 */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* D1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 10),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ2 */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* D2 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 11),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ3 */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* D3 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ4 */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* D4 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ5 */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* D5 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ6 */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* D6 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ7 */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* D7 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "nand0"), /* DQS */
+ SUNXI_FUNCTION(0x3, "mmc2")), /* RST */
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* RXD3 */
+ SUNXI_FUNCTION(0x3, "di"), /* TX */
+ SUNXI_FUNCTION(0x4, "ts2")), /* CLK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* RXD2 */
+ SUNXI_FUNCTION(0x3, "di"), /* RX */
+ SUNXI_FUNCTION(0x4, "ts2")), /* ERR */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* RXD1 */
+ SUNXI_FUNCTION(0x4, "ts2")), /* SYNC */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* RXD0 */
+ SUNXI_FUNCTION(0x4, "ts2")), /* DVLD */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* RXCK */
+ SUNXI_FUNCTION(0x4, "ts2")), /* D0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* RXCTL/RXDV */
+ SUNXI_FUNCTION(0x4, "ts2")), /* D1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* RXERR */
+ SUNXI_FUNCTION(0x4, "ts2")), /* D2 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 7),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* TXD3 */
+ SUNXI_FUNCTION(0x4, "ts2"), /* D3 */
+ SUNXI_FUNCTION(0x5, "ts3")), /* CLK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* TXD2 */
+ SUNXI_FUNCTION(0x4, "ts2"), /* D4 */
+ SUNXI_FUNCTION(0x5, "ts3")), /* ERR */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* TXD1 */
+ SUNXI_FUNCTION(0x4, "ts2"), /* D5 */
+ SUNXI_FUNCTION(0x5, "ts3")), /* SYNC */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 10),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* TXD0 */
+ SUNXI_FUNCTION(0x4, "ts2"), /* D6 */
+ SUNXI_FUNCTION(0x5, "ts3")), /* DVLD */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 11),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* CRS */
+ SUNXI_FUNCTION(0x4, "ts2"), /* D7 */
+ SUNXI_FUNCTION(0x5, "ts3")), /* D0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 12),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* TXCK */
+ SUNXI_FUNCTION(0x4, "sim")), /* PWREN */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 13),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* TXCTL/TXEN */
+ SUNXI_FUNCTION(0x4, "sim")), /* CLK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 14),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* TXERR */
+ SUNXI_FUNCTION(0x4, "sim")), /* DATA */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* CLKIN/COL */
+ SUNXI_FUNCTION(0x4, "sim")), /* RST */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 16),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac"), /* MDC */
+ SUNXI_FUNCTION(0x4, "sim")), /* DET */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 17),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "emac")), /* MDIO */
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* PCLK */
+ SUNXI_FUNCTION(0x3, "ts0")), /* CLK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* MCLK */
+ SUNXI_FUNCTION(0x3, "ts0")), /* ERR */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* HSYNC */
+ SUNXI_FUNCTION(0x3, "ts0")), /* SYNC */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* VSYNC */
+ SUNXI_FUNCTION(0x3, "ts0")), /* DVLD */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* D0 */
+ SUNXI_FUNCTION(0x3, "ts0")), /* D0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* D1 */
+ SUNXI_FUNCTION(0x3, "ts0")), /* D1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* D2 */
+ SUNXI_FUNCTION(0x3, "ts0")), /* D2 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* D3 */
+ SUNXI_FUNCTION(0x3, "ts0"), /* D3 */
+ SUNXI_FUNCTION(0x4, "ts1")), /* CLK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* D4 */
+ SUNXI_FUNCTION(0x3, "ts0"), /* D4 */
+ SUNXI_FUNCTION(0x4, "ts1")), /* ERR */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* D5 */
+ SUNXI_FUNCTION(0x3, "ts0"), /* D5 */
+ SUNXI_FUNCTION(0x4, "ts1")), /* SYNC */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* D6 */
+ SUNXI_FUNCTION(0x3, "ts0"), /* D6 */
+ SUNXI_FUNCTION(0x4, "ts1")), /* DVLD */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* D7 */
+ SUNXI_FUNCTION(0x3, "ts"), /* D7 */
+ SUNXI_FUNCTION(0x4, "ts1")), /* D0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* SCK */
+ SUNXI_FUNCTION(0x3, "i2c2")), /* SCK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 13),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "csi"), /* SDA */
+ SUNXI_FUNCTION(0x3, "i2c2")), /* SDA */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 14),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "sim")), /* VPPEN */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 15),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "sim")), /* VPPPP */
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc0"), /* D1 */
+ SUNXI_FUNCTION(0x3, "jtag")), /* MS */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc0"), /* D0 */
+ SUNXI_FUNCTION(0x3, "jtag")), /* DI */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc0"), /* CLK */
+ SUNXI_FUNCTION(0x3, "uart0")), /* TX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc0"), /* CMD */
+ SUNXI_FUNCTION(0x3, "jtag")), /* DO */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc0"), /* D3 */
+ SUNXI_FUNCTION(0x3, "uart0")), /* RX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc0"), /* D2 */
+ SUNXI_FUNCTION(0x3, "jtag")), /* CK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+ /* Hole */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc1"), /* CLK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 0)), /* PG_EINT0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc1"), /* CMD */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 1)), /* PG_EINT1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc1"), /* D0 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 2)), /* PG_EINT2 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc1"), /* D1 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 3)), /* PG_EINT3 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc1"), /* D2 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 4)), /* PG_EINT4 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "mmc1"), /* D3 */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 5)), /* PG_EINT5 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart1"), /* TX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 6)), /* PG_EINT6 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 7),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart1"), /* RX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 7)), /* PG_EINT7 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart1"), /* RTS */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 8)), /* PG_EINT8 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "uart1"), /* CTS */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 9)), /* PG_EINT9 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2s1"), /* SYNC */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 10)), /* PG_EINT10 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 11),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2s1"), /* CLK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 11)), /* PG_EINT11 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 12),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2s1"), /* DOUT */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 12)), /* PG_EINT12 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 13),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "i2s1"), /* DIN */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 13)), /* PG_EINT13 */
+};
+
+static const struct sunxi_pinctrl_desc sun50i_h5_pinctrl_data = {
+ .pins = sun50i_h5_pins,
+ .npins = ARRAY_SIZE(sun50i_h5_pins),
+ .irq_banks = 2,
+ .irq_read_needs_mux = true
+};
+
+static int sun50i_h5_pinctrl_probe(struct platform_device *pdev)
+{
+ return sunxi_pinctrl_init(pdev,
+ &sun50i_h5_pinctrl_data);
+}
+
+static const struct of_device_id sun50i_h5_pinctrl_match[] = {
+ { .compatible = "allwinner,sun50i-h5-pinctrl", },
+ {}
+};
+
+static struct platform_driver sun50i_h5_pinctrl_driver = {
+ .probe = sun50i_h5_pinctrl_probe,
+ .driver = {
+ .name = "sun50i-h5-pinctrl",
+ .of_match_table = sun50i_h5_pinctrl_match,
+ },
+};
+builtin_platform_driver(sun50i_h5_pinctrl_driver);
--
2.11.0
^ permalink raw reply related
* [PATCH 2/6] arm64: allwinner: Kconfig: add essential pinctrl driver for H5
From: Icenowy Zheng @ 2016-12-26 16:25 UTC (permalink / raw)
To: Linus Walleij, Chen-Yu Tsai, Maxime Ripard, Rob Herring,
Andre Przywara
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA, Icenowy Zheng
In-Reply-To: <20161226162518.5367-1-icenowy-ymACFijhrKM@public.gmane.org>
H5 SoC has two pin controllers, one (in user manual called "CPUx") needs
a slightly advanced driver, and the other (called "CPUs") is just equal
to the on in H3, and the H3 driver can be just reused.
Select the two necessary pinctrl drivers when building kernel for
Allwinner SoCs.
Also add H5 in the option's description.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
arch/arm64/Kconfig.platforms | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 715ef1256838..e11523d204b5 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -5,8 +5,11 @@ config ARCH_SUNXI
select GENERIC_IRQ_CHIP
select PINCTRL
select PINCTRL_SUN50I_A64
+ select PINCTRL_SUN50I_H5
+ select PINCTRL_SUN8I_H3_R
help
- This enables support for Allwinner sunxi based SoCs like the A64.
+ This enables support for Allwinner sunxi based SoCs like the A64
+ and H5.
config ARCH_ALPINE
bool "Annapurna Labs Alpine platform"
--
2.11.0
^ permalink raw reply related
* [PATCH 3/6] clk: sunxi-ng: Add H5 clocks
From: Icenowy Zheng @ 2016-12-26 16:25 UTC (permalink / raw)
To: Linus Walleij, Chen-Yu Tsai, Maxime Ripard, Rob Herring,
Andre Przywara
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA, Icenowy Zheng
In-Reply-To: <20161226162518.5367-1-icenowy-ymACFijhrKM@public.gmane.org>
Add the H5 CCU clocks set based on the H3 one.
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
drivers/clk/sunxi-ng/Kconfig | 11 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun50i-h5.c | 807 ++++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-h5.h | 63 +++
include/dt-bindings/clock/sun50i-h5-ccu.h | 143 ++++++
include/dt-bindings/reset/sun50i-h5-ccu.h | 107 ++++
6 files changed, 1132 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h5.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h5.h
create mode 100644 include/dt-bindings/clock/sun50i-h5-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h5-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 8454c6e3dd65..b4d6d3be629d 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -64,6 +64,17 @@ config SUN50I_A64_CCU
select SUNXI_CCU_PHASE
default ARM64 && ARCH_SUNXI
+config SUN50I_H5_CCU
+ bool "Support for the Allwinner H5 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NKMP
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default ARM64 && ARCH_SUNXI
+
config SUN6I_A31_CCU
bool "Support for the Allwinner A31/A31s CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 24fbc6e5deb8..fcfa6793bac0 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
# SoC support
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
+obj-$(CONFIG_SUN50I_H5_CCU) += ccu-sun50i-h5.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h5.c b/drivers/clk/sunxi-ng/ccu-sun50i-h5.c
new file mode 100644
index 000000000000..bd97ad76e2d8
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h5.c
@@ -0,0 +1,807 @@
+/*
+ * Copyright (c) Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * Based on ccu-sun8i-h3.c, which is:
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun50i-h5.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux",
+ "osc24M", 0x000,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ 16, 2, /* P */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_H3_PLL_AUDIO_REG 0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+ "osc24M", 0x008,
+ 8, 7, /* N */
+ 0, 5, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+ "osc24M", 0x0010,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+ "osc24M", 0x0018,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr",
+ "osc24M", 0x020,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0",
+ "osc24M", 0x028,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 2, /* post-div */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+ "osc24M", 0x0038,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph1_clk, "pll-periph1",
+ "osc24M", 0x044,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 2, /* post-div */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+ "osc24M", 0x0048,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static const char * const cpux_parents[] = { "osc32k", "osc24M",
+ "pll-cpux" , "pll-cpux" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+ 0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+ "axi" , "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .mux = {
+ .shift = 12,
+ .width = 2,
+
+ .variable_prediv = {
+ .index = 3,
+ .shift = 6,
+ .width = 2,
+ },
+ },
+
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb1",
+ ahb1_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb1_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+ 0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+ "pll-periph0" , "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
+static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
+ { .index = 1, .div = 2 },
+};
+static struct ccu_mux ahb2_clk = {
+ .mux = {
+ .shift = 0,
+ .width = 1,
+ .fixed_predivs = ahb2_fixed_predivs,
+ .n_predivs = ARRAY_SIZE(ahb2_fixed_predivs),
+ },
+
+ .common = {
+ .reg = 0x05c,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb2",
+ ahb2_parents,
+ &ccu_mux_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
+ 0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
+ 0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
+ 0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
+ 0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb2",
+ 0x060, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb2",
+ 0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb2",
+ 0x060, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
+ 0x060, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb2",
+ 0x060, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb2",
+ 0x060, BIT(30), 0);
+static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb2",
+ 0x060, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
+ 0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_tve_clk, "bus-tve", "ahb1",
+ 0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
+ 0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
+ 0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
+ 0x064, BIT(22), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
+ 0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
+ 0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
+ 0x068, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
+ 0x068, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
+ 0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
+ 0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2",
+ 0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2",
+ 0x06c, BIT(21), 0);
+
+static SUNXI_CCU_GATE(bus_ephy_clk, "bus-ephy", "ahb1",
+ 0x070, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
+ 0x070, BIT(7), 0);
+
+static struct clk_div_table ths_div_table[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 6 },
+};
+static SUNXI_CCU_DIV_TABLE_WITH_GATE(ths_clk, "ths", "osc24M",
+ 0x074, 0, 2, ths_div_table, BIT(31), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", mod0_default_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+ 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
+ 0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
+ 0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
+ 0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M",
+ 0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc24M",
+ 0x0cc, BIT(11), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
+ 0x0cc, BIT(16), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc24M",
+ 0x0cc, BIT(17), 0);
+static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc24M",
+ 0x0cc, BIT(18), 0);
+static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc24M",
+ 0x0cc, BIT(19), 0);
+
+static const char * const dram_parents[] = { "pll-ddr", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+ 0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
+ 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
+ 0x100, BIT(3), 0);
+
+static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+ 0x104, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
+ 0x118, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tve_parents[] = { "pll-de", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tve_clk, "tve", tve_parents,
+ 0x120, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
+ 0x124, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M",
+ 0x130, BIT(31), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
+ 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video", "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk", csi_mclk_parents,
+ 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+ 0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
+ 0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(hdmi_ddc_clk, "hdmi-ddc", "osc24M",
+ 0x154, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+ 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+ 0x1a0, 0, 3, BIT(31), 0);
+
+static struct ccu_common *sun50i_h5_ccu_clks[] = {
+ &pll_cpux_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr_clk.common,
+ &pll_periph0_clk.common,
+ &pll_gpu_clk.common,
+ &pll_periph1_clk.common,
+ &pll_de_clk.common,
+ &cpux_clk.common,
+ &axi_clk.common,
+ &ahb1_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &ahb2_clk.common,
+ &bus_ce_clk.common,
+ &bus_dma_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_nand_clk.common,
+ &bus_dram_clk.common,
+ &bus_emac_clk.common,
+ &bus_ts_clk.common,
+ &bus_hstimer_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &bus_otg_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_ehci1_clk.common,
+ &bus_ehci2_clk.common,
+ &bus_ehci3_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ohci1_clk.common,
+ &bus_ohci2_clk.common,
+ &bus_ohci3_clk.common,
+ &bus_ve_clk.common,
+ &bus_tcon0_clk.common,
+ &bus_tcon1_clk.common,
+ &bus_deinterlace_clk.common,
+ &bus_csi_clk.common,
+ &bus_tve_clk.common,
+ &bus_hdmi_clk.common,
+ &bus_de_clk.common,
+ &bus_gpu_clk.common,
+ &bus_msgbox_clk.common,
+ &bus_spinlock_clk.common,
+ &bus_codec_clk.common,
+ &bus_spdif_clk.common,
+ &bus_pio_clk.common,
+ &bus_ths_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2s1_clk.common,
+ &bus_i2s2_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_uart3_clk.common,
+ &bus_scr0_clk.common,
+ &bus_scr1_clk.common,
+ &bus_ephy_clk.common,
+ &bus_dbg_clk.common,
+ &ths_clk.common,
+ &nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &ts_clk.common,
+ &ce_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &i2s0_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &spdif_clk.common,
+ &usb_phy0_clk.common,
+ &usb_phy1_clk.common,
+ &usb_phy2_clk.common,
+ &usb_phy3_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_ohci2_clk.common,
+ &usb_ohci3_clk.common,
+ &dram_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi_clk.common,
+ &dram_deinterlace_clk.common,
+ &dram_ts_clk.common,
+ &de_clk.common,
+ &tcon_clk.common,
+ &tve_clk.common,
+ &deinterlace_clk.common,
+ &csi_misc_clk.common,
+ &csi_sclk_clk.common,
+ &csi_mclk_clk.common,
+ &ve_clk.common,
+ &ac_dig_clk.common,
+ &avs_clk.common,
+ &hdmi_clk.common,
+ &hdmi_ddc_clk.common,
+ &mbus_clk.common,
+ &gpu_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+ "pll-periph0", 1, 2, 0);
+
+static struct clk_hw_onecell_data sun50i_h5_hw_clks = {
+ .hws = {
+ [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
+ [CLK_CPUX] = &cpux_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_AHB2] = &ahb2_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
+ [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
+ [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
+ [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
+ [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
+ [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_BUS_TVE] = &bus_tve_clk.common.hw,
+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
+ [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
+ [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
+ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_SCR0] = &bus_scr0_clk.common.hw,
+ [CLK_BUS_SCR1] = &bus_scr1_clk.common.hw,
+ [CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_THS] = &ths_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
+ [CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
+ [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_TCON0] = &tcon_clk.common.hw,
+ [CLK_TVE] = &tve_clk.common.hw,
+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
+ [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_AC_DIG] = &ac_dig_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_h5_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_USB_PHY3] = { 0x0cc, BIT(3) },
+
+ [RST_MBUS] = { 0x0fc, BIT(31) },
+
+ [RST_BUS_CE] = { 0x2c0, BIT(5) },
+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
+ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
+ [RST_BUS_NAND] = { 0x2c0, BIT(13) },
+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
+ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
+ [RST_BUS_TS] = { 0x2c0, BIT(18) },
+ [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
+ [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
+ [RST_BUS_OTG] = { 0x2c0, BIT(23) },
+ [RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
+ [RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
+ [RST_BUS_EHCI2] = { 0x2c0, BIT(26) },
+ [RST_BUS_EHCI3] = { 0x2c0, BIT(27) },
+ [RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
+ [RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
+ [RST_BUS_OHCI2] = { 0x2c0, BIT(30) },
+ [RST_BUS_OHCI3] = { 0x2c0, BIT(31) },
+
+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
+ [RST_BUS_TCON0] = { 0x2c4, BIT(3) },
+ [RST_BUS_TCON1] = { 0x2c4, BIT(4) },
+ [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
+ [RST_BUS_CSI] = { 0x2c4, BIT(8) },
+ [RST_BUS_TVE] = { 0x2c4, BIT(9) },
+ [RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
+ [RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
+ [RST_BUS_DE] = { 0x2c4, BIT(12) },
+ [RST_BUS_GPU] = { 0x2c4, BIT(20) },
+ [RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
+ [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
+ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
+
+ [RST_BUS_EPHY] = { 0x2c8, BIT(2) },
+
+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
+ [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
+ [RST_BUS_THS] = { 0x2d0, BIT(8) },
+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
+ [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
+ [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
+
+ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
+ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
+ [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
+ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
+ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
+ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
+ [RST_BUS_UART3] = { 0x2d8, BIT(19) },
+ [RST_BUS_SCR0] = { 0x2d8, BIT(20) },
+ [RST_BUS_SCR1] = { 0x2d8, BIT(21) },
+};
+
+static const struct sunxi_ccu_desc sun50i_h5_ccu_desc = {
+ .ccu_clks = sun50i_h5_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun50i_h5_ccu_clks),
+
+ .hw_clks = &sun50i_h5_hw_clks,
+
+ .resets = sun50i_h5_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun50i_h5_ccu_resets),
+};
+
+static void __init sun50i_h5_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN8I_H3_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN8I_H3_PLL_AUDIO_REG);
+
+ sunxi_ccu_probe(node, reg, &sun50i_h5_ccu_desc);
+}
+CLK_OF_DECLARE(sun50i_h5_ccu, "allwinner,sun50i-h5-ccu",
+ sun50i_h5_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h5.h b/drivers/clk/sunxi-ng/ccu-sun50i-h5.h
new file mode 100644
index 000000000000..c9e0ef64d8a4
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h5.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * Based on ccu-sun8i-h3.h, which is:
+ * Copyright 2016 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_H3_H_
+#define _CCU_SUN8I_H3_H_
+
+#include <dt-bindings/clock/sun50i-h5-ccu.h>
+#include <dt-bindings/reset/sun50i-h5-ccu.h>
+
+#define CLK_PLL_CPUX 0
+#define CLK_PLL_AUDIO_BASE 1
+#define CLK_PLL_AUDIO 2
+#define CLK_PLL_AUDIO_2X 3
+#define CLK_PLL_AUDIO_4X 4
+#define CLK_PLL_AUDIO_8X 5
+#define CLK_PLL_VIDEO 6
+#define CLK_PLL_VE 7
+#define CLK_PLL_DDR 8
+#define CLK_PLL_PERIPH0 9
+#define CLK_PLL_PERIPH0_2X 10
+#define CLK_PLL_GPU 11
+#define CLK_PLL_PERIPH1 12
+#define CLK_PLL_DE 13
+
+/* The CPUX clock is exported */
+
+#define CLK_AXI 15
+#define CLK_AHB1 16
+#define CLK_APB1 17
+#define CLK_APB2 18
+#define CLK_AHB2 19
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM 91
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS 108
+
+/* And the GPU module clock is exported */
+
+#define CLK_NUMBER (CLK_GPU + 1)
+
+#endif /* _CCU_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/clock/sun50i-h5-ccu.h b/include/dt-bindings/clock/sun50i-h5-ccu.h
new file mode 100644
index 000000000000..1f31e85dc315
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-h5-ccu.h
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * Based on sun8i-h3-ccu.h, which is:
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_H5_H_
+#define _DT_BINDINGS_CLK_SUN50I_H5_H_
+
+#define CLK_CPUX 14
+
+#define CLK_BUS_CE 20
+#define CLK_BUS_DMA 21
+#define CLK_BUS_MMC0 22
+#define CLK_BUS_MMC1 23
+#define CLK_BUS_MMC2 24
+#define CLK_BUS_NAND 25
+#define CLK_BUS_DRAM 26
+#define CLK_BUS_EMAC 27
+#define CLK_BUS_TS 28
+#define CLK_BUS_HSTIMER 29
+#define CLK_BUS_SPI0 30
+#define CLK_BUS_SPI1 31
+#define CLK_BUS_OTG 32
+#define CLK_BUS_EHCI0 33
+#define CLK_BUS_EHCI1 34
+#define CLK_BUS_EHCI2 35
+#define CLK_BUS_EHCI3 36
+#define CLK_BUS_OHCI0 37
+#define CLK_BUS_OHCI1 38
+#define CLK_BUS_OHCI2 39
+#define CLK_BUS_OHCI3 40
+#define CLK_BUS_VE 41
+#define CLK_BUS_TCON0 42
+#define CLK_BUS_TCON1 43
+#define CLK_BUS_DEINTERLACE 44
+#define CLK_BUS_CSI 45
+#define CLK_BUS_TVE 46
+#define CLK_BUS_HDMI 47
+#define CLK_BUS_DE 48
+#define CLK_BUS_GPU 49
+#define CLK_BUS_MSGBOX 50
+#define CLK_BUS_SPINLOCK 51
+#define CLK_BUS_CODEC 52
+#define CLK_BUS_SPDIF 53
+#define CLK_BUS_PIO 54
+#define CLK_BUS_THS 55
+#define CLK_BUS_I2S0 56
+#define CLK_BUS_I2S1 57
+#define CLK_BUS_I2S2 58
+#define CLK_BUS_I2C0 59
+#define CLK_BUS_I2C1 60
+#define CLK_BUS_I2C2 61
+#define CLK_BUS_UART0 62
+#define CLK_BUS_UART1 63
+#define CLK_BUS_UART2 64
+#define CLK_BUS_UART3 65
+#define CLK_BUS_SCR0 66
+#define CLK_BUS_SCR1 67
+#define CLK_BUS_EPHY 68
+#define CLK_BUS_DBG 69
+
+#define CLK_THS 70
+#define CLK_NAND 71
+#define CLK_MMC0 72
+#define CLK_MMC1 73
+#define CLK_MMC2 74
+#define CLK_TS 75
+#define CLK_CE 76
+#define CLK_SPI0 77
+#define CLK_SPI1 78
+#define CLK_I2S0 79
+#define CLK_I2S1 80
+#define CLK_I2S2 81
+#define CLK_SPDIF 82
+#define CLK_USB_PHY0 83
+#define CLK_USB_PHY1 84
+#define CLK_USB_PHY2 85
+#define CLK_USB_PHY3 86
+#define CLK_USB_OHCI0 87
+#define CLK_USB_OHCI1 88
+#define CLK_USB_OHCI2 89
+#define CLK_USB_OHCI3 90
+
+#define CLK_DRAM_VE 92
+#define CLK_DRAM_CSI 93
+#define CLK_DRAM_DEINTERLACE 94
+#define CLK_DRAM_TS 95
+#define CLK_DE 96
+#define CLK_TCON0 97
+#define CLK_TVE 98
+#define CLK_DEINTERLACE 99
+#define CLK_CSI_MISC 100
+#define CLK_CSI_SCLK 101
+#define CLK_CSI_MCLK 102
+#define CLK_VE 103
+#define CLK_AC_DIG 104
+#define CLK_AVS 105
+#define CLK_HDMI 106
+#define CLK_HDMI_DDC 107
+
+#define CLK_GPU 109
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H5_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h5-ccu.h b/include/dt-bindings/reset/sun50i-h5-ccu.h
new file mode 100644
index 000000000000..fa1ecdd615b5
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-h5-ccu.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * Based on sun8i-h3-ccu.h, which is:
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN50I_H5_H_
+#define _DT_BINDINGS_RST_SUN50I_H5_H_
+
+#define RST_USB_PHY0 0
+#define RST_USB_PHY1 1
+#define RST_USB_PHY2 2
+#define RST_USB_PHY3 3
+
+#define RST_MBUS 4
+
+#define RST_BUS_CE 5
+#define RST_BUS_DMA 6
+#define RST_BUS_MMC0 7
+#define RST_BUS_MMC1 8
+#define RST_BUS_MMC2 9
+#define RST_BUS_NAND 10
+#define RST_BUS_DRAM 11
+#define RST_BUS_EMAC 12
+#define RST_BUS_TS 13
+#define RST_BUS_HSTIMER 14
+#define RST_BUS_SPI0 15
+#define RST_BUS_SPI1 16
+#define RST_BUS_OTG 17
+#define RST_BUS_EHCI0 18
+#define RST_BUS_EHCI1 19
+#define RST_BUS_EHCI2 20
+#define RST_BUS_EHCI3 21
+#define RST_BUS_OHCI0 22
+#define RST_BUS_OHCI1 23
+#define RST_BUS_OHCI2 24
+#define RST_BUS_OHCI3 25
+#define RST_BUS_VE 26
+#define RST_BUS_TCON0 27
+#define RST_BUS_TCON1 28
+#define RST_BUS_DEINTERLACE 29
+#define RST_BUS_CSI 30
+#define RST_BUS_TVE 31
+#define RST_BUS_HDMI0 32
+#define RST_BUS_HDMI1 33
+#define RST_BUS_DE 34
+#define RST_BUS_GPU 35
+#define RST_BUS_MSGBOX 36
+#define RST_BUS_SPINLOCK 37
+#define RST_BUS_DBG 38
+#define RST_BUS_EPHY 39
+#define RST_BUS_CODEC 40
+#define RST_BUS_SPDIF 41
+#define RST_BUS_THS 42
+#define RST_BUS_I2S0 43
+#define RST_BUS_I2S1 44
+#define RST_BUS_I2S2 45
+#define RST_BUS_I2C0 46
+#define RST_BUS_I2C1 47
+#define RST_BUS_I2C2 48
+#define RST_BUS_UART0 49
+#define RST_BUS_UART1 50
+#define RST_BUS_UART2 51
+#define RST_BUS_UART3 52
+#define RST_BUS_SCR0 53
+#define RST_BUS_SCR1 54
+
+#endif /* _DT_BINDINGS_RST_SUN50I_H5_H_ */
--
2.11.0
^ permalink raw reply related
* Re: [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file
From: Fabio Estevam @ 2016-12-26 16:26 UTC (permalink / raw)
To: Milo Kim
Cc: Shawn Guo, Sascha Hauer, Fabio Estevam,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
In-Reply-To: <20161209010436.7994-2-woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Thu, Dec 8, 2016 at 11:04 PM, Milo Kim <woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> * Memory
> memblock for DDR3 1GB
>
> * Regulator
> 3.3V for panel and backlight.
>
> * Display
> Enable HDMI and LVDS panel. Savageboard supports AVIC TM097TDH02 panel
> which is compatible with Hannstar HSD100PXN1, so reuse it.
>
> * Clock
> The commit d28be499c45e6 is applied to support LVDS and HDMI output
> simultaneously.
>
> * Pinmux
> eMMC, ethernet, HDMI, I2C, power button, PWM, SD card and UART.
>
> * Others
> Enable ethernet, UART1 debug, USB host, USDHC3 for microSD card and
> USDHC4 for built-in eMMC storage.
>
> Signed-off-by: Milo Kim <woogyom.kim-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Reviewed-by: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual
From: Fabio Estevam @ 2016-12-26 16:27 UTC (permalink / raw)
To: Milo Kim
Cc: devicetree@vger.kernel.org, linux-kernel, Sascha Hauer,
Fabio Estevam, Shawn Guo, linux-arm-kernel@lists.infradead.org
In-Reply-To: <20161209010436.7994-3-woogyom.kim@gmail.com>
On Thu, Dec 8, 2016 at 11:04 PM, Milo Kim <woogyom.kim@gmail.com> wrote:
> Common savageboard DT file is used for board support.
> Specify this dtb file for i.MX6Q build.
>
> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
^ permalink raw reply
* Re: [PATCH v2 3/3] ARM: dts: imx6: Support Savageboard quad
From: Fabio Estevam @ 2016-12-26 16:28 UTC (permalink / raw)
To: Milo Kim
Cc: devicetree@vger.kernel.org, linux-kernel, Sascha Hauer,
Fabio Estevam, Shawn Guo, linux-arm-kernel@lists.infradead.org
In-Reply-To: <20161206070829.24098-4-woogyom.kim@gmail.com>
On Tue, Dec 6, 2016 at 5:08 AM, Milo Kim <woogyom.kim@gmail.com> wrote:
> Use common board file and support SATA interface additionally.
>
> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
^ permalink raw reply
* [PATCH 4/6] arm: dts: sun8i: split Allwinner H3 .dtsi
From: Icenowy Zheng @ 2016-12-26 17:11 UTC (permalink / raw)
To: Linus Walleij, Chen-Yu Tsai, Maxime Ripard, Rob Herring,
Andre Przywara
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA, Icenowy Zheng
From: Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>
The new Allwinner H5 SoC is pin-compatible to the H3 SoC, but with the
Cortex-A7 cores replaced by Cortex-A53 cores and the MMC controller
updated. So we should really share almost the whole .dtsi.
In preparation for that move the peripheral parts of the existing
sun8i-h3.dtsi into a new sun8i-h3-h5.dtsi.
The actual sun8i-h3.dtsi then includes that and defines the H3 specific
parts on top of it.
On the way get rid of skeleton.dtsi, as recommended in that very file.
Signed-off-by: Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>
[Icenowy: also split out mmc , as well as pio and ccu's compatible]
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
arch/arm/boot/dts/sun8i-h3-h5.dtsi | 536 +++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3.dtsi | 473 +-------------------------------
2 files changed, 543 insertions(+), 466 deletions(-)
create mode 100644 arch/arm/boot/dts/sun8i-h3-h5.dtsi
diff --git a/arch/arm/boot/dts/sun8i-h3-h5.dtsi b/arch/arm/boot/dts/sun8i-h3-h5.dtsi
new file mode 100644
index 000000000000..ecad824bc65d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-h5.dtsi
@@ -0,0 +1,536 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ apb0: apb0_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&osc24M>;
+ clock-output-names = "apb0";
+ };
+
+ apb0_gates: clk@01f01428 {
+ compatible = "allwinner,sun8i-h3-apb0-gates-clk",
+ "allwinner,sun4i-a10-gates-clk";
+ reg = <0x01f01428 0x4>;
+ #clock-cells = <1>;
+ clocks = <&apb0>;
+ clock-indices = <0>, <1>;
+ clock-output-names = "apb0_pio", "apb0_ir";
+ };
+
+ ir_clk: ir_clk@01f01454 {
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01f01454 0x4>;
+ #clock-cells = <0>;
+ clocks = <&osc32k>, <&osc24M>;
+ clock-output-names = "ir";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun8i-h3-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
+ mmc0: mmc@01c0f000 {
+ /* compatible and clocks are in per SoC .dtsi file */
+ reg = <0x01c0f000 0x1000>;
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@01c10000 {
+ /* compatible and clocks are in per SoC .dtsi file */
+ reg = <0x01c10000 0x1000>;
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@01c11000 {
+ /* compatible and clocks are in per SoC .dtsi file */
+ reg = <0x01c11000 0x1000>;
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usbphy: phy@01c19400 {
+ compatible = "allwinner,sun8i-h3-usb-phy";
+ reg = <0x01c19400 0x2c>,
+ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>,
+ <0x01c1c800 0x4>,
+ <0x01c1d800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1",
+ "pmu2",
+ "pmu3";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>,
+ <&ccu CLK_USB_PHY3>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy",
+ "usb3_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>,
+ <&ccu RST_USB_PHY3>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset",
+ "usb3_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci1: usb@01c1b000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1b000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+ resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@01c1b400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1b400 0x100>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+ <&ccu CLK_USB_OHCI1>;
+ resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci2: usb@01c1c000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1c000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+ resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@01c1c400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+ <&ccu CLK_USB_OHCI2>;
+ resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci3: usb@01c1d000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1d000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+ resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci3: usb@01c1d400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1d400 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+ <&ccu CLK_USB_OHCI3>;
+ resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ccu: clock@01c20000 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl@01c20800 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ i2c0_pins: i2c0 {
+ pins = "PA11", "PA12";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ pins = "PA18", "PA19";
+ function = "i2c1";
+ };
+
+ i2c2_pins: i2c2 {
+ pins = "PE12", "PE13";
+ function = "i2c2";
+ };
+
+ mmc0_pins_a: mmc0@0 {
+ pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc0_cd_pin: mmc0_cd_pin@0 {
+ pins = "PF6";
+ function = "gpio_in";
+ bias-pull-up;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_8bit_pins: mmc2_8bit {
+ pins = "PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14",
+ "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ spi0_pins: spi0 {
+ pins = "PC0", "PC1", "PC2", "PC3";
+ function = "spi0";
+ };
+
+ spi1_pins: spi1 {
+ pins = "PA15", "PA16", "PA14", "PA13";
+ function = "spi1";
+ };
+
+ uart0_pins_a: uart0@0 {
+ pins = "PA4", "PA5";
+ function = "uart0";
+ };
+
+ uart1_pins: uart1 {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ uart1_rts_cts_pins: uart1_rts_cts {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
+
+ uart2_pins: uart2 {
+ pins = "PA0", "PA1";
+ function = "uart2";
+ };
+
+ uart3_pins: uart3 {
+ pins = "PA13", "PA14";
+ function = "uart3";
+ };
+ };
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0xa0>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ spi0: spi@01c68000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c68000 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@01c69000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c69000 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 24>, <&dma 24>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ wdt0: watchdog@01c20ca0 {
+ compatible = "allwinner,sun6i-a31-wdt";
+ reg = <0x01c20ca0 0x20>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pwm: pwm@01c21400 {
+ compatible = "allwinner,sun8i-h3-pwm";
+ reg = <0x01c21400 0x8>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ dmas = <&dma 9>, <&dma 9>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ rtc: rtc@01f00000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x01f00000 0x54>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ apb0_reset: reset@01f014b0 {
+ reg = <0x01f014b0 0x4>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ #reset-cells = <1>;
+ };
+
+ ir: ir@01f02000 {
+ compatible = "allwinner,sun5i-a13-ir";
+ clocks = <&apb0_gates 1>, <&ir_clk>;
+ clock-names = "apb", "ir";
+ resets = <&apb0_reset 1>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x40>;
+ status = "disabled";
+ };
+
+ r_pio: pinctrl@01f02c00 {
+ compatible = "allwinner,sun8i-h3-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ resets = <&apb0_reset 0>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ ir_pins_a: ir@0 {
+ pins = "PL11";
+ function = "s_cir_rx";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index fe24cda6cb52..a454d2abd8ed 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -40,12 +40,9 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
#include <dt-bindings/clock/sun8i-h3-ccu.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include "sun8i-h3-h5.dtsi"
/ {
interrupt-parent = <&gic>;
@@ -87,71 +84,9 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- osc24M: osc24M_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: osc32k_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
-
- apb0: apb0_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk@01f01428 {
- compatible = "allwinner,sun8i-h3-apb0-gates-clk",
- "allwinner,sun4i-a10-gates-clk";
- reg = <0x01f01428 0x4>;
- #clock-cells = <1>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>;
- clock-output-names = "apb0_pio", "apb0_ir";
- };
-
- ir_clk: ir_clk@01f01454 {
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01f01454 0x4>;
- #clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>;
- clock-output-names = "ir";
- };
- };
-
soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun8i-h3-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_DMA>;
- resets = <&ccu RST_BUS_DMA>;
- #dma-cells = <1>;
- };
-
- mmc0: mmc@01c0f000 {
+ mmc@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
- reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>,
<&ccu CLK_MMC0>,
<&ccu CLK_MMC0_OUTPUT>,
@@ -160,17 +95,10 @@
"mmc",
"output",
"sample";
- resets = <&ccu RST_BUS_MMC0>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
};
- mmc1: mmc@01c10000 {
+ mmc@01c10000 {
compatible = "allwinner,sun7i-a20-mmc";
- reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>,
<&ccu CLK_MMC1>,
<&ccu CLK_MMC1_OUTPUT>,
@@ -179,17 +107,10 @@
"mmc",
"output",
"sample";
- resets = <&ccu RST_BUS_MMC1>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
};
- mmc2: mmc@01c11000 {
+ mmc@01c11000 {
compatible = "allwinner,sun7i-a20-mmc";
- reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>,
<&ccu CLK_MMC2>,
<&ccu CLK_MMC2_OUTPUT>,
@@ -198,217 +119,14 @@
"mmc",
"output",
"sample";
- resets = <&ccu RST_BUS_MMC2>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usbphy: phy@01c19400 {
- compatible = "allwinner,sun8i-h3-usb-phy";
- reg = <0x01c19400 0x2c>,
- <0x01c1a800 0x4>,
- <0x01c1b800 0x4>,
- <0x01c1c800 0x4>,
- <0x01c1d800 0x4>;
- reg-names = "phy_ctrl",
- "pmu0",
- "pmu1",
- "pmu2",
- "pmu3";
- clocks = <&ccu CLK_USB_PHY0>,
- <&ccu CLK_USB_PHY1>,
- <&ccu CLK_USB_PHY2>,
- <&ccu CLK_USB_PHY3>;
- clock-names = "usb0_phy",
- "usb1_phy",
- "usb2_phy",
- "usb3_phy";
- resets = <&ccu RST_USB_PHY0>,
- <&ccu RST_USB_PHY1>,
- <&ccu RST_USB_PHY2>,
- <&ccu RST_USB_PHY3>;
- reset-names = "usb0_reset",
- "usb1_reset",
- "usb2_reset",
- "usb3_reset";
- status = "disabled";
- #phy-cells = <1>;
};
- ehci1: usb@01c1b000 {
- compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
- reg = <0x01c1b000 0x100>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
- resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci1: usb@01c1b400 {
- compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
- reg = <0x01c1b400 0x100>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
- <&ccu CLK_USB_OHCI1>;
- resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci2: usb@01c1c000 {
- compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
- reg = <0x01c1c000 0x100>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
- resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci2: usb@01c1c400 {
- compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
- reg = <0x01c1c400 0x100>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
- <&ccu CLK_USB_OHCI2>;
- resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ehci3: usb@01c1d000 {
- compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
- reg = <0x01c1d000 0x100>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
- resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci3: usb@01c1d400 {
- compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
- reg = <0x01c1d400 0x100>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
- <&ccu CLK_USB_OHCI3>;
- resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ccu: clock@01c20000 {
+ clock@01c20000 {
compatible = "allwinner,sun8i-h3-ccu";
- reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
- clock-names = "hosc", "losc";
- #clock-cells = <1>;
- #reset-cells = <1>;
};
- pio: pinctrl@01c20800 {
+ pinctrl@01c20800 {
compatible = "allwinner,sun8i-h3-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
- clock-names = "apb", "hosc", "losc";
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
- #interrupt-cells = <3>;
-
- i2c0_pins: i2c0 {
- pins = "PA11", "PA12";
- function = "i2c0";
- };
-
- i2c1_pins: i2c1 {
- pins = "PA18", "PA19";
- function = "i2c1";
- };
-
- i2c2_pins: i2c2 {
- pins = "PE12", "PE13";
- function = "i2c2";
- };
-
- mmc0_pins_a: mmc0@0 {
- pins = "PF0", "PF1", "PF2", "PF3",
- "PF4", "PF5";
- function = "mmc0";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- mmc0_cd_pin: mmc0_cd_pin@0 {
- pins = "PF6";
- function = "gpio_in";
- bias-pull-up;
- };
-
- mmc1_pins_a: mmc1@0 {
- pins = "PG0", "PG1", "PG2", "PG3",
- "PG4", "PG5";
- function = "mmc1";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- mmc2_8bit_pins: mmc2_8bit {
- pins = "PC5", "PC6", "PC8",
- "PC9", "PC10", "PC11",
- "PC12", "PC13", "PC14",
- "PC15", "PC16";
- function = "mmc2";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- spi0_pins: spi0 {
- pins = "PC0", "PC1", "PC2", "PC3";
- function = "spi0";
- };
-
- spi1_pins: spi1 {
- pins = "PA15", "PA16", "PA14", "PA13";
- function = "spi1";
- };
-
- uart0_pins_a: uart0@0 {
- pins = "PA4", "PA5";
- function = "uart0";
- };
-
- uart1_pins: uart1 {
- pins = "PG6", "PG7";
- function = "uart1";
- };
-
- uart1_rts_cts_pins: uart1_rts_cts {
- pins = "PG8", "PG9";
- function = "uart1";
- };
-
- uart2_pins: uart2 {
- pins = "PA0", "PA1";
- function = "uart2";
- };
-
- uart3_pins: uart3 {
- pins = "PA13", "PA14";
- function = "uart3";
- };
};
timer@01c20c00 {
@@ -419,143 +137,6 @@
clocks = <&osc24M>;
};
- spi0: spi@01c68000 {
- compatible = "allwinner,sun8i-h3-spi";
- reg = <0x01c68000 0x1000>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- dmas = <&dma 23>, <&dma 23>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
- resets = <&ccu RST_BUS_SPI0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@01c69000 {
- compatible = "allwinner,sun8i-h3-spi";
- reg = <0x01c69000 0x1000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
- clock-names = "ahb", "mod";
- dmas = <&dma 24>, <&dma 24>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins>;
- resets = <&ccu RST_BUS_SPI1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- wdt0: watchdog@01c20ca0 {
- compatible = "allwinner,sun6i-a31-wdt";
- reg = <0x01c20ca0 0x20>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pwm: pwm@01c21400 {
- compatible = "allwinner,sun8i-h3-pwm";
- reg = <0x01c21400 0x8>;
- clocks = <&osc24M>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- uart0: serial@01c28000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART0>;
- resets = <&ccu RST_BUS_UART0>;
- dmas = <&dma 6>, <&dma 6>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart1: serial@01c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART1>;
- resets = <&ccu RST_BUS_UART1>;
- dmas = <&dma 7>, <&dma 7>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart2: serial@01c28800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28800 0x400>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART2>;
- resets = <&ccu RST_BUS_UART2>;
- dmas = <&dma 8>, <&dma 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart3: serial@01c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART3>;
- resets = <&ccu RST_BUS_UART3>;
- dmas = <&dma 9>, <&dma 9>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C0>;
- resets = <&ccu RST_BUS_I2C0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C1>;
- resets = <&ccu RST_BUS_I2C1>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C2>;
- resets = <&ccu RST_BUS_I2C2>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
@@ -566,46 +147,6 @@
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
-
- rtc: rtc@01f00000 {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x54>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- apb0_reset: reset@01f014b0 {
- reg = <0x01f014b0 0x4>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- #reset-cells = <1>;
- };
-
- ir: ir@01f02000 {
- compatible = "allwinner,sun5i-a13-ir";
- clocks = <&apb0_gates 1>, <&ir_clk>;
- clock-names = "apb", "ir";
- resets = <&apb0_reset 1>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
- status = "disabled";
- };
-
- r_pio: pinctrl@01f02c00 {
- compatible = "allwinner,sun8i-h3-r-pinctrl";
- reg = <0x01f02c00 0x400>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
- clock-names = "apb", "hosc", "losc";
- resets = <&apb0_reset 0>;
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
- #interrupt-cells = <3>;
-
- ir_pins_a: ir@0 {
- pins = "PL11";
- function = "s_cir_rx";
- };
- };
};
};
+
--
2.11.0
^ permalink raw reply related
* [PATCH 5/6] arm64: dts: allwinner: add Allwinner H5 .dtsi
From: Icenowy Zheng @ 2016-12-26 17:11 UTC (permalink / raw)
To: Linus Walleij, Chen-Yu Tsai, Maxime Ripard, Rob Herring,
Andre Przywara
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA, Icenowy Zheng
In-Reply-To: <20161226171156.11605-1-icenowy-ymACFijhrKM@public.gmane.org>
From: Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>
The Allwinner H5 SoC is pin-compatible to the H3 SoC, but uses
Cortex-A53 cores instead.
Based on the now shared base .dtsi describing the common peripherals
describe the H5 specific nodes on top of that.
That symlinks in the sun8i-h3-h5.dtsi from the arch/arm tree.
Signed-off-by: Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>
[Icenowy: remove H5 mmc compatible (seems equal to A64), add H5 pinctrl
compatible, and changes for my h3-h5 dtsi refactor, commit message
change to met new arm64 naming scheme]
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 143 +++++++++++++++++++++++++
arch/arm64/boot/dts/allwinner/sun8i-h3-h5.dtsi | 1 +
2 files changed, 144 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
create mode 120000 arch/arm64/boot/dts/allwinner/sun8i-h3-h5.dtsi
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
new file mode 100644
index 000000000000..2cc372121f60
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun50i-h5-ccu.h>
+#include <dt-bindings/reset/sun50i-h5-ccu.h>
+#include "sun8i-h3-h5.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ mmc@01c0f000 {
+ compatible = "allwinner,sun50i-a64-mmc",
+ "allwinner,sun5i-a13-mmc";
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ };
+
+ mmc@01c10000 {
+ compatible = "allwinner,sun50i-a64-mmc",
+ "allwinner,sun5i-a13-mmc";
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ };
+
+ mmc@01c11000 {
+ compatible = "allwinner,sun50i-a64-mmc",
+ "allwinner,sun5i-a13-mmc";
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ };
+
+ clock@01c20000 {
+ compatible = "allwinner,sun50i-h5-ccu",
+ "allwinner,sun8i-h3-ccu";
+ };
+
+ pinctrl@01c20800 {
+ compatible = "allwinner,sun50i-h5-pinctrl",
+ "allwinner,sun8i-h3-pinctrl";
+ };
+
+ gic: interrupt-controller@1c81000 {
+ compatible = "arm,gic-400";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x2000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun8i-h3-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun8i-h3-h5.dtsi
new file mode 120000
index 000000000000..74f3ce9358a5
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun8i-h3-h5.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/sun8i-h3-h5.dtsi
\ No newline at end of file
--
2.11.0
^ permalink raw reply related
* [PATCH 6/6] arm64: dts: sunxi: add support for the Orange Pi PC 2 board
From: Icenowy Zheng @ 2016-12-26 17:11 UTC (permalink / raw)
To: Linus Walleij, Chen-Yu Tsai, Maxime Ripard, Rob Herring,
Andre Przywara
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA, Icenowy Zheng
In-Reply-To: <20161226171156.11605-1-icenowy-ymACFijhrKM@public.gmane.org>
From: Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>
The Orange Pi PC 2 is a typical single board computer using the
Allwinner H5 SoC. Apart from the usual suspects it features three
separately driven USB ports and a Gigabit Ethernet port.
Also it has a SPI NOR flash soldered, from which the board can boot
from. This enables the SBC to behave like a "real computer" with
built-in firmware.
Add the board specific .dts file, which includes the H5 .dtsi and
enables the peripherals that we support so far.
Signed-off-by: Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts | 183 +++++++++++++++++++++
2 files changed, 184 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 1e29a5ae8282..b26bb46b934c 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
new file mode 100644
index 000000000000..a29ca6b274bb
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Xunlong Orange Pi PC 2";
+ compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+ pwr_led {
+ label = "orangepi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ status_led {
+ label = "orangepi:red:status";
+ gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r_gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sw_r_opc>;
+
+ sw4 {
+ label = "sw4";
+ linux,code = <BTN_0>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&pio {
+ leds_opc: led_pins@0 {
+ allwinner,pins = "PA15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&r_pio {
+ leds_r_opc: led_pins@0 {
+ allwinner,pins = "PL10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ sw_r_opc: key_pins@0 {
+ allwinner,pins = "PL3";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&usbphy {
+ /* USB VBUS is always on */
+ status = "okay";
+};
--
2.11.0
^ permalink raw reply related
* [PATCH v2] ARM: dts: sunxi: Add num-cs for A20 spi nodes
From: Emmanuel Vadot @ 2016-12-26 17:47 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Emmanuel Vadot
The spi0 controller on the A20 have up to 4 CS (Chip Select) while the
others three only have 1.
Add the num-cs property to each node.
The current driver doesn't read this property but this is useful for
downstream user of DTS (FreeBSD for example).
Signed-off-by: Emmanuel Vadot <manu-xXdDKFdH5B3kFDPD4ZthVA@public.gmane.org>
---
Changes in v2:
* Explain that driver doesn't support this but that it is useful
for downstream users of DTS.
arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 94cf5a1c7172..ed21982c81cb 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -871,6 +871,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = 4;
};
spi1: spi@01c06000 {
@@ -885,6 +886,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = 1;
};
emac: ethernet@01c0b000 {
@@ -1037,6 +1039,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = 1;
};
ahci: sata@01c18000 {
@@ -1079,6 +1082,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = 1;
};
pio: pinctrl@01c20800 {
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH] ARM: dts: sunxi: Enable spi1 and spi2 for Olimex A20 SOM EVB
From: Emmanuel Vadot @ 2016-12-26 17:53 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Emmanuel Vadot
Enable the spi1 and spi2 node since the pins are exposed on the UEXT
connectors.
Signed-off-by: Emmanuel Vadot <manu-xXdDKFdH5B3kFDPD4ZthVA@public.gmane.org>
---
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
index 669a1c338c76..fa8c6f60552b 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -300,12 +300,14 @@
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>,
<&spi1_cs0_pins_a>;
+ status = "okay";
};
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>,
<&spi2_cs0_pins_a>;
+ status = "okay";
};
&uart0 {
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v4 1/5] devicetree: mfd: Add binding for the TI LM3533
From: Bjorn Andersson @ 2016-12-26 18:11 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Jonathan Cameron
Cc: Lee Jones, Hartmut Knaack, Lars-Peter Clausen,
Peter Meerwald-Stadler, Richard Purdie, Jacek Anaszewski,
Pavel Machek, Jingoo Han, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-iio-u79uwXL29TY76Z2rM5mHXA,
linux-leds-u79uwXL29TY76Z2rM5mHXA, Bjorn Andersson
From: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
Add the binding for the Texas Instruments LM3533 lighting power
solution.
Signed-off-by: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
I had Acks from Jonathan and Rob on v3, but dropped these due to the added
compatible properties.
Changes since v3:
- Added compatible to sub-nodes, per Lee's requested to treat them as separate
pieces.
Documentation/devicetree/bindings/mfd/lm3533.txt | 205 +++++++++++++++++++++++
1 file changed, 205 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/lm3533.txt
diff --git a/Documentation/devicetree/bindings/mfd/lm3533.txt b/Documentation/devicetree/bindings/mfd/lm3533.txt
new file mode 100644
index 000000000000..909281096ba2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lm3533.txt
@@ -0,0 +1,205 @@
+Texas Instruments LM3533 binding
+
+This binding describes the Texas Instruments LM3533, a lighting power solution
+for smartphone handsets. The common properties are described directly in the
+node, while each individual component are described in an optional subnode.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be:
+ "ti,lm3533"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: i2c address of the LM3533 chip
+
+- als-supply:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: reference to regulator powering the V_als input; as
+ specified in "../regulator/regulator.txt"
+
+- hwen-gpios:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to gpio pin connected to the HWEN input; as
+ specified in "../gpio/gpio.txt"
+
+- ti,boost-freq-hz:
+ Usage: required
+ Value type: <u32>
+ Definition: switch-frequency of the boost converter, must be either:
+ 500000 or 1000000
+
+- ti,boost-ovp-mv:
+ Usage: required
+ Value type: <u32>
+ Definition: over-voltage protection limit, in mV. Must be one of:
+ 16000, 24000, 32000 or 40000
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+= ALS SUBNODE
+The ambient light sensor subnode carrying the light sensor related properties.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be:
+ "ti,lm3533-als"
+
+- ti,als-resistance-ohm:
+ Usage: required (unless ti,pwm-mode is specified)
+ Value type: <u32>
+ Definition: specifies the resistor value (R_als), in Ohm. Valid values
+ ranges from 200000 to 1574 Ohm.
+
+- ti,pwm-mode:
+ Usage: optional
+ Value type: <empty>
+ Definition: specifies, if present, that the als should operate in PWM
+ mode - rather than analog mode
+
+= BACKLIGHT NODES
+Backlight subnodes carrying the backlight related properties.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be:
+ "ti,lm3533-backlight"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies which of the two backlights this node corresponds
+ to
+
+- default-brightness:
+ Usage: optional
+ Value type: <32>
+ Definition: specifies the default brightness for the backlight, in
+ units of brightness [0-255]
+
+- label:
+ Usage: required
+ Value type: <string>
+ Definition: specifies a name of this backlight
+
+- led-max-microamp:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the max current for this backlight, in uA, as
+ described in "../leds/common.txt"
+
+- ti,pwm-zones:
+ Usage: optional
+ Value type: <u32 list>
+ Definition: lists the ALS zones to be PWM controlled for this backlight,
+ the values in the list are in the range [0 - 4]
+
+= LED NODES
+LED subnodes carrying the LED related properties.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be:
+ "ti,lm3533-led"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies which of the four LEDs this node corresponds to
+
+- linux,default-trigger:
+ Usage: optional
+ Value type: <string>
+ Definition: specifies the default trigger for the LED, as described in
+ "../leds/common.txt"
+
+- label:
+ Usage: required
+ Value type: <string>
+ Definition: specifies a name of this LED, as described in
+ "../leds/common.txt"
+
+- led-max-microamp:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the max current for this LED, in uA, as described
+ in "../leds/common.txt"
+
+- ti,pwm-zones:
+ Usage: optional
+ Value type: <u32 list>
+ Definition: lists the ALS zones to be PWM controlled for this LED, the
+ values in the list are in the range [0 - 4]
+
+= EXAMPLE
+
+i2c@12460000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ ...
+
+ lm3533@36 {
+ compatible = "ti,lm3533";
+ reg = <0x36>;
+
+ als-supply = <&pm8921_l11>;
+ hwen-gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>;
+
+ ti,boost-freq-hz = <500000>;
+ ti,boost-ovp-mv = <24000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ als {
+ compatible = "ti,lm3533-als";
+ ti,als-resistance-ohm = <200000>;
+ };
+
+ backlight@0 {
+ compatible = "ti,lm3533-backlight";
+ reg = <0>;
+ label = "backlight";
+
+ led-max-microamp = <20200>;
+ };
+
+ led@0 {
+ compatible = "ti,lm3533-led";
+ reg = <0>;
+ label = "red";
+
+ led-max-microamp = <5000>;
+ };
+
+ led@1 {
+ compatible = "ti,lm3533-led";
+ reg = <1>;
+ label = "green";
+
+ led-max-microamp = <5000>;
+ };
+
+ led@2 {
+ compatible = "ti,lm3533-led";
+ reg = <2>;
+ label = "blue";
+
+ led-max-microamp = <5000>;
+ };
+ };
+
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v4 2/5] mfd: lm3533: Support initialization from Device Tree
From: Bjorn Andersson @ 2016-12-26 18:11 UTC (permalink / raw)
To: Lee Jones
Cc: Rob Herring, Mark Rutland, Jonathan Cameron, Hartmut Knaack,
Lars-Peter Clausen, Peter Meerwald-Stadler, Richard Purdie,
Jacek Anaszewski, Pavel Machek, Jingoo Han, devicetree,
linux-kernel, linux-iio, linux-leds, Bjorn Andersson
In-Reply-To: <20161226181153.11271-1-bjorn.andersson@linaro.org>
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Implement support for initialization of the lm3533 driver core and
probing child devices from Device Tree.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v3:
- Moved parsing of child of nodes into each child driver
- Use of_platform_populate() to instanciate child devices
drivers/mfd/lm3533-core.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index 5abcbb2e8849..f147677f05ff 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -18,6 +18,8 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/mfd/core.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
#include <linux/regmap.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
@@ -512,6 +514,11 @@ static int lm3533_device_init(struct lm3533 *lm3533)
lm3533_device_bl_init(lm3533);
lm3533_device_led_init(lm3533);
+ if (lm3533->dev->of_node) {
+ of_platform_populate(lm3533->dev->of_node, NULL, NULL,
+ lm3533->dev);
+ }
+
ret = sysfs_create_group(&lm3533->dev->kobj, &lm3533_attribute_group);
if (ret < 0) {
dev_err(lm3533->dev, "failed to create sysfs attributes\n");
@@ -588,10 +595,73 @@ static const struct regmap_config regmap_config = {
.precious_reg = lm3533_precious_register,
};
+static int lm3533_of_parse_enum(struct device *dev, const char *propname,
+ const unsigned int *match, size_t num_matches)
+{
+ size_t i;
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(dev->of_node, propname, &val);
+ if (ret < 0) {
+ dev_err(dev, "failed to parse %s\n", propname);
+ return ret;
+ }
+
+ for (i = 0; i < num_matches; i++) {
+ if (val == match[i])
+ return i;
+ }
+
+ dev_err(dev, "unsupported value of %s\n", propname);
+ return -EINVAL;
+}
+
+static int lm3533_pdata_from_of_node(struct device *dev)
+{
+ struct lm3533_platform_data *pdata;
+ int ret;
+ const unsigned int freqs[] = {
+ [LM3533_BOOST_FREQ_500KHZ] = 500000,
+ [LM3533_BOOST_FREQ_1000KHZ] = 1000000,
+ };
+ const unsigned int ovps[] = {
+ [LM3533_BOOST_OVP_16V] = 16000,
+ [LM3533_BOOST_OVP_24V] = 24000,
+ [LM3533_BOOST_OVP_32V] = 32000,
+ [LM3533_BOOST_OVP_40V] = 40000,
+ };
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->gpio_hwen = of_get_named_gpio(dev->of_node, "hwen-gpios", 0);
+ if (pdata->gpio_hwen < 0)
+ return pdata->gpio_hwen;
+
+ ret = lm3533_of_parse_enum(dev, "ti,boost-freq-hz",
+ freqs, ARRAY_SIZE(freqs));
+ if (ret < 0)
+ return ret;
+ pdata->boost_freq = ret;
+
+ ret = lm3533_of_parse_enum(dev, "ti,boost-ovp-mv",
+ ovps, ARRAY_SIZE(ovps));
+ if (ret < 0)
+ return ret;
+ pdata->boost_ovp = ret;
+
+ dev->platform_data = pdata;
+
+ return 0;
+}
+
static int lm3533_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct lm3533 *lm3533;
+ int ret;
dev_dbg(&i2c->dev, "%s\n", __func__);
@@ -608,6 +678,12 @@ static int lm3533_i2c_probe(struct i2c_client *i2c,
lm3533->dev = &i2c->dev;
lm3533->irq = i2c->irq;
+ if (i2c->dev.of_node) {
+ ret = lm3533_pdata_from_of_node(lm3533->dev);
+ if (ret < 0)
+ return ret;
+ }
+
return lm3533_device_init(lm3533);
}
--
2.11.0
^ permalink raw reply related
* [PATCH v4 3/5] backlight: lm3533: Support initialization from Device Tree
From: Bjorn Andersson @ 2016-12-26 18:11 UTC (permalink / raw)
To: Lee Jones, Jingoo Han
Cc: Rob Herring, Mark Rutland, Jonathan Cameron, Hartmut Knaack,
Lars-Peter Clausen, Peter Meerwald-Stadler, Richard Purdie,
Jacek Anaszewski, Pavel Machek, devicetree, linux-kernel,
linux-iio, linux-leds, Bjorn Andersson
In-Reply-To: <20161226181153.11271-1-bjorn.andersson@linaro.org>
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Implement support for initialization of the lm3533 backlight from Device
Tree.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
This patch only depends on the acceptance of the DT binding (doesn't have to be
merged together with the mfd patch).
Changes since v3:
- Moved backlight DT parsing from mfd driver
- Gave driver its own compatible
drivers/video/backlight/lm3533_bl.c | 98 +++++++++++++++++++++++++++++++++++--
1 file changed, 95 insertions(+), 3 deletions(-)
diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
index 0e2337f367b6..2f132199e604 100644
--- a/drivers/video/backlight/lm3533_bl.c
+++ b/drivers/video/backlight/lm3533_bl.c
@@ -22,6 +22,7 @@
#define LM3533_HVCTRLBANK_COUNT 2
+#define LM3533_BL_DEFAULT_BRIGHTNESS 200
#define LM3533_BL_MAX_BRIGHTNESS 255
#define LM3533_REG_CTRLBANK_AB_BCONF 0x1a
@@ -269,6 +270,86 @@ static int lm3533_bl_setup(struct lm3533_bl *bl,
return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm);
}
+static int lm3533_of_parse_pwm_zones(struct device_node *node)
+{
+ const char *propname = "ti,pwm-zones";
+ u32 zones[5];
+ int count;
+ int ret;
+ int i;
+
+ count = of_property_count_u32_elems(node, propname);
+ if (count == -EINVAL)
+ return 0;
+ if (count <= 0)
+ return count;
+ if (count >= ARRAY_SIZE(zones))
+ return -EINVAL;
+
+ ret = of_property_read_u32_array(node, propname, zones, count);
+ if (ret < 0)
+ return ret;
+
+ /* Enable pwm input, and enable the selected zones */
+ ret = BIT(0);
+ for (i = 0; i < count; i++)
+ ret |= BIT(zones[i] + 1);
+
+ return ret;
+}
+
+static struct lm3533_bl_platform_data *lm3533_bl_of_parse(struct device *dev,
+ int *id)
+{
+ struct lm3533_bl_platform_data *bl_pdata;
+ struct device_node *node = dev->of_node;
+ int ret;
+ u32 reg;
+ u32 val;
+
+ bl_pdata = devm_kzalloc(dev, sizeof(*bl_pdata), GFP_KERNEL);
+ if (!bl_pdata)
+ return NULL;
+
+ ret = of_property_read_u32(node, "reg", ®);
+ if (ret < 0) {
+ dev_err(dev, "invalid reg property\n");
+ return NULL;
+ }
+ *id = reg;
+
+ ret = of_property_read_string(node, "label",
+ (const char **)&bl_pdata->name);
+ if (ret < 0) {
+ dev_err(dev, "unable to parse label\n");
+ return NULL;
+ }
+
+ ret = of_property_read_u32(node, "led-max-microamp", &val);
+ if (ret < 0) {
+ dev_err(dev, "unable to parse led-max-microamp\n");
+ return NULL;
+ }
+ bl_pdata->max_current = val;
+
+ val = LM3533_BL_DEFAULT_BRIGHTNESS;
+ ret = of_property_read_u32(node, "default-brightness", &val);
+ if (ret < 0 && ret != -EINVAL) {
+ dev_err(dev, "unable to parse default-brightness\n");
+ return NULL;
+ }
+ bl_pdata->default_brightness = val;
+
+ ret = lm3533_of_parse_pwm_zones(node);
+ if (ret < 0) {
+ dev_err(dev, "failed to parse ti,pwm-zones\n");
+ return NULL;
+ }
+ bl_pdata->pwm = ret;
+
+ return bl_pdata;
+}
+
static int lm3533_bl_probe(struct platform_device *pdev)
{
struct lm3533 *lm3533;
@@ -277,6 +358,7 @@ static int lm3533_bl_probe(struct platform_device *pdev)
struct backlight_device *bd;
struct backlight_properties props;
int ret;
+ int id;
dev_dbg(&pdev->dev, "%s\n", __func__);
@@ -284,14 +366,17 @@ static int lm3533_bl_probe(struct platform_device *pdev)
if (!lm3533)
return -EINVAL;
+ id = pdev->id;
pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata)
+ pdata = lm3533_bl_of_parse(&pdev->dev, &id);
if (!pdata) {
dev_err(&pdev->dev, "no platform data\n");
return -EINVAL;
}
- if (pdev->id < 0 || pdev->id >= LM3533_HVCTRLBANK_COUNT) {
- dev_err(&pdev->dev, "illegal backlight id %d\n", pdev->id);
+ if (id < 0 || id >= LM3533_HVCTRLBANK_COUNT) {
+ dev_err(&pdev->dev, "illegal backlight id %d\n", id);
return -EINVAL;
}
@@ -300,7 +385,7 @@ static int lm3533_bl_probe(struct platform_device *pdev)
return -ENOMEM;
bl->lm3533 = lm3533;
- bl->id = pdev->id;
+ bl->id = id;
bl->cb.lm3533 = lm3533;
bl->cb.id = lm3533_bl_get_ctrlbank_id(bl);
@@ -394,10 +479,17 @@ static void lm3533_bl_shutdown(struct platform_device *pdev)
lm3533_ctrlbank_disable(&bl->cb);
}
+static const struct of_device_id lm3533_bl_of_match[] = {
+ { .compatible = "ti,lm3533-backlight", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, lm3533_bl_of_match);
+
static struct platform_driver lm3533_bl_driver = {
.driver = {
.name = "lm3533-backlight",
.pm = &lm3533_bl_pm_ops,
+ .of_match_table = lm3533_bl_of_match,
},
.probe = lm3533_bl_probe,
.remove = lm3533_bl_remove,
--
2.11.0
^ permalink raw reply related
* Re: [PATCH v2] ARM: dts: sunxi: Add num-cs for A20 spi nodes
From: kbuild test robot @ 2016-12-26 19:34 UTC (permalink / raw)
Cc: kbuild-all-JC7UmRfGjtg, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Emmanuel Vadot
In-Reply-To: <20161226174748.17544-1-manu-xXdDKFdH5B3kFDPD4ZthVA@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1083 bytes --]
Hi Emmanuel,
[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.10-rc1 next-20161224]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Emmanuel-Vadot/ARM-dts-sunxi-Add-num-cs-for-A20-spi-nodes/20161227-015214
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-at91_dt_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm
All errors (new ones prefixed by >>):
>> Error: arch/arm/boot/dts/sun7i-a20.dtsi:874.13-14 syntax error
FATAL ERROR: Unable to parse input tree
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 21781 bytes --]
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox