* [PATCH v5 3/7] regulator: rk808: Add regulator driver for RK805
From: Elaine Zhang @ 2017-03-27 6:21 UTC (permalink / raw)
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A
Cc: huangtao-TNX95d0MmH7DzftRWevZcw, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA, xxx-TNX95d0MmH7DzftRWevZcw,
Elaine Zhang, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, w.egorov-guT5V/WYfQezQB+pC5nmwQ,
chenjh-TNX95d0MmH7DzftRWevZcw
In-Reply-To: <1490595705-28844-1-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Add support for the rk805 regulator. The regulator module consists
of 4 DCDCs, 3 LDOs.
The output voltages are configurable and are meant to supply power
to the main processor and other components.
Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
drivers/regulator/Kconfig | 4 +-
drivers/regulator/rk808-regulator.c | 130 ++++++++++++++++++++++++++++++++++++
2 files changed, 132 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index be06eb29c681..285e28051219 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -650,11 +650,11 @@ config REGULATOR_RC5T583
outputs which can be controlled by i2c communication.
config REGULATOR_RK808
- tristate "Rockchip RK808/RK818 Power regulators"
+ tristate "Rockchip RK805/RK808/RK818 Power regulators"
depends on MFD_RK808
help
Select this option to enable the power regulator of ROCKCHIP
- PMIC RK808 and RK818.
+ PMIC RK805,RK808 and RK818.
This driver supports the control of different power rails of device
through regulator interface. The device supports multiple DCDC/LDO
outputs which can be controlled by i2c communication.
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index fb44d5215e30..128c81e19ee8 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -65,6 +65,27 @@
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
+#define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _etime) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .enable_time = (_etime), \
+ .ops = &rk805_reg_ops, \
+ }
+
#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _etime) \
[_id] = { \
@@ -298,6 +319,28 @@ static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
sel);
}
+static int rk805_set_suspend_enable(struct regulator_dev *rdev)
+{
+ unsigned int reg;
+
+ reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->enable_mask,
+ rdev->desc->enable_mask);
+}
+
+static int rk805_set_suspend_disable(struct regulator_dev *rdev)
+{
+ unsigned int reg;
+
+ reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->enable_mask,
+ 0);
+}
+
static int rk808_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
@@ -320,6 +363,27 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
rdev->desc->enable_mask);
}
+static struct regulator_ops rk805_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk805_set_suspend_enable,
+ .set_suspend_disable = rk805_set_suspend_disable,
+};
+
+static struct regulator_ops rk805_switch_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = rk805_set_suspend_enable,
+ .set_suspend_disable = rk805_set_suspend_disable,
+};
+
static struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -369,6 +433,68 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
.set_suspend_disable = rk808_set_suspend_disable,
};
+static const struct regulator_desc rk805_reg[] = {
+ {
+ .name = "DCDC_REG1",
+ .supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK805_ID_DCDC1,
+ .ops = &rk805_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
+ .n_voltages = 64,
+ .vsel_reg = RK805_BUCK1_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK805_DCDC_EN_REG,
+ .enable_mask = BIT(0),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_REG2",
+ .supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK805_ID_DCDC2,
+ .ops = &rk805_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
+ .n_voltages = 64,
+ .vsel_reg = RK805_BUCK2_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK805_DCDC_EN_REG,
+ .enable_mask = BIT(1),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_REG3",
+ .supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK805_ID_DCDC3,
+ .ops = &rk805_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 1,
+ .enable_reg = RK805_DCDC_EN_REG,
+ .enable_mask = BIT(2),
+ .owner = THIS_MODULE,
+ },
+
+ RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100,
+ RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
+ RK805_DCDC_EN_REG, BIT(3), 0),
+
+ RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100,
+ RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
+ BIT(0), 400),
+ RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100,
+ RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
+ BIT(1), 400),
+ RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100,
+ RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
+ BIT(2), 400),
+};
+
static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
@@ -625,6 +751,10 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
switch (rk808->variant) {
+ case RK805_ID:
+ regulators = rk805_reg;
+ nregulators = RK805_NUM_REGULATORS;
+ break;
case RK808_ID:
regulators = rk808_reg;
nregulators = RK808_NUM_REGULATORS;
--
1.9.1
^ permalink raw reply related
* [PATCH v5 2/7] mfd: rk808: add rk805 regs addr and ID
From: Elaine Zhang @ 2017-03-27 6:21 UTC (permalink / raw)
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A
Cc: huangtao-TNX95d0MmH7DzftRWevZcw, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA, xxx-TNX95d0MmH7DzftRWevZcw,
Elaine Zhang, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, w.egorov-guT5V/WYfQezQB+pC5nmwQ,
chenjh-TNX95d0MmH7DzftRWevZcw
In-Reply-To: <1490595705-28844-1-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
include/linux/mfd/rk808.h | 120 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 54feb140c210..d3156594674c 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -206,6 +206,97 @@ enum rk818_reg {
#define RK818_USB_ILMIN_2000MA 0x7
#define RK818_USB_CHG_SD_VSEL_MASK 0x70
+/* RK805 */
+enum rk805_reg {
+ RK805_ID_DCDC1,
+ RK805_ID_DCDC2,
+ RK805_ID_DCDC3,
+ RK805_ID_DCDC4,
+ RK805_ID_LDO1,
+ RK805_ID_LDO2,
+ RK805_ID_LDO3,
+};
+
+/* CONFIG REGISTER */
+#define RK805_VB_MON_REG 0x21
+#define RK805_THERMAL_REG 0x22
+
+/* POWER CHANNELS ENABLE REGISTER */
+#define RK805_DCDC_EN_REG 0x23
+#define RK805_SLP_DCDC_EN_REG 0x25
+#define RK805_SLP_LDO_EN_REG 0x26
+#define RK805_LDO_EN_REG 0x27
+
+/* BUCK AND LDO CONFIG REGISTER */
+#define RK805_BUCK_LDO_SLP_LP_EN_REG 0x2A
+#define RK805_BUCK1_CONFIG_REG 0x2E
+#define RK805_BUCK1_ON_VSEL_REG 0x2F
+#define RK805_BUCK1_SLP_VSEL_REG 0x30
+#define RK805_BUCK2_CONFIG_REG 0x32
+#define RK805_BUCK2_ON_VSEL_REG 0x33
+#define RK805_BUCK2_SLP_VSEL_REG 0x34
+#define RK805_BUCK3_CONFIG_REG 0x36
+#define RK805_BUCK4_CONFIG_REG 0x37
+#define RK805_BUCK4_ON_VSEL_REG 0x38
+#define RK805_BUCK4_SLP_VSEL_REG 0x39
+#define RK805_LDO1_ON_VSEL_REG 0x3B
+#define RK805_LDO1_SLP_VSEL_REG 0x3C
+#define RK805_LDO2_ON_VSEL_REG 0x3D
+#define RK805_LDO2_SLP_VSEL_REG 0x3E
+#define RK805_LDO3_ON_VSEL_REG 0x3F
+#define RK805_LDO3_SLP_VSEL_REG 0x40
+
+/* INTERRUPT REGISTER */
+#define RK805_PWRON_LP_INT_TIME_REG 0x47
+#define RK805_PWRON_DB_REG 0x48
+#define RK805_DEV_CTRL_REG 0x4B
+#define RK805_INT_STS_REG 0x4C
+#define RK805_INT_STS_MSK_REG 0x4D
+#define RK805_GPIO_IO_POL_REG 0x50
+#define RK805_OUT_REG 0x52
+#define RK805_ON_SOURCE_REG 0xAE
+#define RK805_OFF_SOURCE_REG 0xAF
+
+#define RK805_NUM_REGULATORS 7
+
+#define RK805_PWRON_FALL_RISE_INT_EN 0x0
+#define RK805_PWRON_FALL_RISE_INT_MSK 0x81
+
+/* RK805 IRQ Definitions */
+#define RK805_IRQ_PWRON_RISE 0
+#define RK805_IRQ_VB_LOW 1
+#define RK805_IRQ_PWRON 2
+#define RK805_IRQ_PWRON_LP 3
+#define RK805_IRQ_HOTDIE 4
+#define RK805_IRQ_RTC_ALARM 5
+#define RK805_IRQ_RTC_PERIOD 6
+#define RK805_IRQ_PWRON_FALL 7
+
+#define RK805_IRQ_PWRON_RISE_MSK BIT(0)
+#define RK805_IRQ_VB_LOW_MSK BIT(1)
+#define RK805_IRQ_PWRON_MSK BIT(2)
+#define RK805_IRQ_PWRON_LP_MSK BIT(3)
+#define RK805_IRQ_HOTDIE_MSK BIT(4)
+#define RK805_IRQ_RTC_ALARM_MSK BIT(5)
+#define RK805_IRQ_RTC_PERIOD_MSK BIT(6)
+#define RK805_IRQ_PWRON_FALL_MSK BIT(7)
+
+#define RK805_PWR_RISE_INT_STATUS BIT(0)
+#define RK805_VB_LOW_INT_STATUS BIT(1)
+#define RK805_PWRON_INT_STATUS BIT(2)
+#define RK805_PWRON_LP_INT_STATUS BIT(3)
+#define RK805_HOTDIE_INT_STATUS BIT(4)
+#define RK805_ALARM_INT_STATUS BIT(5)
+#define RK805_PERIOD_INT_STATUS BIT(6)
+#define RK805_PWR_FALL_INT_STATUS BIT(7)
+
+#define RK805_BUCK1_2_ILMAX_MASK (3 << 6)
+#define RK805_BUCK3_4_ILMAX_MASK (3 << 3)
+#define RK805_RTC_PERIOD_INT_MASK (1 << 6)
+#define RK805_RTC_ALARM_INT_MASK (1 << 5)
+#define RK805_INT_ALARM_EN (1 << 3)
+#define RK805_INT_TIMER_EN (1 << 2)
+
/* RK808 IRQ Definitions */
#define RK808_IRQ_VOUT_LO 0
#define RK808_IRQ_VB_LO 1
@@ -298,7 +389,14 @@ enum rk818_reg {
#define VOUT_LO_INT BIT(0)
#define CLK32KOUT2_EN BIT(0)
+#define TEMP115C 0x0c
+#define TEMP_HOTDIE_MSK 0x0c
+#define SLP_SD_MSK (0x3 << 2)
+#define SHUTDOWN_FUN (0x2 << 2)
+#define SLEEP_FUN (0x1 << 2)
#define RK8XX_ID_MSK 0xfff0
+#define FPWM_MODE BIT(7)
+
enum {
BUCK_ILMIN_50MA,
BUCK_ILMIN_100MA,
@@ -322,6 +420,28 @@ enum {
};
enum {
+ RK805_BUCK1_2_ILMAX_2500MA,
+ RK805_BUCK1_2_ILMAX_3000MA,
+ RK805_BUCK1_2_ILMAX_3500MA,
+ RK805_BUCK1_2_ILMAX_4000MA,
+};
+
+enum {
+ RK805_BUCK3_ILMAX_1500MA,
+ RK805_BUCK3_ILMAX_2000MA,
+ RK805_BUCK3_ILMAX_2500MA,
+ RK805_BUCK3_ILMAX_3000MA,
+};
+
+enum {
+ RK805_BUCK4_ILMAX_2000MA,
+ RK805_BUCK4_ILMAX_2500MA,
+ RK805_BUCK4_ILMAX_3000MA,
+ RK805_BUCK4_ILMAX_3500MA,
+};
+
+enum {
+ RK805_ID = 0x8050,
RK808_ID = 0x0000,
RK818_ID = 0x8181,
};
--
1.9.1
^ permalink raw reply related
* [PATCH v5 1/7] mfd: rk808: fix up the chip id get failed
From: Elaine Zhang @ 2017-03-27 6:21 UTC (permalink / raw)
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A
Cc: huangtao-TNX95d0MmH7DzftRWevZcw, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA, xxx-TNX95d0MmH7DzftRWevZcw,
Elaine Zhang, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, w.egorov-guT5V/WYfQezQB+pC5nmwQ,
chenjh-TNX95d0MmH7DzftRWevZcw
In-Reply-To: <1490595705-28844-1-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
the rk8xx chip id is:
((MSB << 8) | LSB) & 0xfff0
Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
drivers/mfd/rk808.c | 21 +++++++++++++++------
include/linux/mfd/rk808.h | 1 +
2 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index fd087cbb0bde..3334a2a7f3fb 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -325,7 +325,7 @@ static int rk808_probe(struct i2c_client *client,
void (*pm_pwroff_fn)(void);
int nr_pre_init_regs;
int nr_cells;
- int pm_off = 0;
+ int pm_off = 0, msb, lsb;
int ret;
int i;
@@ -333,14 +333,23 @@ static int rk808_probe(struct i2c_client *client,
if (!rk808)
return -ENOMEM;
- rk808->variant = i2c_smbus_read_word_data(client, RK808_ID_MSB);
- if (rk808->variant < 0) {
- dev_err(&client->dev, "Failed to read the chip id at 0x%02x\n",
+ /* read Chip variant */
+ msb = i2c_smbus_read_byte_data(client, RK808_ID_MSB);
+ if (msb < 0) {
+ dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
RK808_ID_MSB);
- return rk808->variant;
+ return msb;
}
- dev_dbg(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
+ lsb = i2c_smbus_read_byte_data(client, RK808_ID_LSB);
+ if (lsb < 0) {
+ dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
+ RK808_ID_LSB);
+ return lsb;
+ }
+
+ rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
+ dev_info(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
switch (rk808->variant) {
case RK808_ID:
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 83701ef7d3c7..54feb140c210 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -298,6 +298,7 @@ enum rk818_reg {
#define VOUT_LO_INT BIT(0)
#define CLK32KOUT2_EN BIT(0)
+#define RK8XX_ID_MSK 0xfff0
enum {
BUCK_ILMIN_50MA,
BUCK_ILMIN_100MA,
--
1.9.1
^ permalink raw reply related
* [PATCH v5 0/7] rk808: Add RK805 support
From: Elaine Zhang @ 2017-03-27 6:21 UTC (permalink / raw)
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, broonie-DgEjT+Ai2ygdnm+yROfE0A
Cc: huangtao-TNX95d0MmH7DzftRWevZcw, mark.rutland-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA, xxx-TNX95d0MmH7DzftRWevZcw,
Elaine Zhang, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, w.egorov-guT5V/WYfQezQB+pC5nmwQ,
chenjh-TNX95d0MmH7DzftRWevZcw
change in v5:
PATCH V5 1/7: NO change in V5
PATCH V5 2/7: fix the rk805 reg addr in numerical order
PATCH V5 3/7: NO change in V5
PATCH V5 4/7: fix up the rk805_device_shutdown func
PATCH V5 5/7: NO change in V5
PATCH V5 6/7: NO change in V5
PATCH V5 7/7: fix up the description of the rk805
change in v4:
PATCH V4 1/7: NO change in V4
PATCH V4 2/7: rename the commit message
PATCH V4 3/7: NO change in V4
PATCH V4 4/7: Split this patch up into subsystems patch 5/7 6/7
PATCH V4 5/7: new added
PATCH V4 6/7: new added
PATCH V4 7/7: NO change in V4
change in V3:
PATCH V3 1/5: NO change in V3
PATCH V3 2/5: add rk805 RTC INT MASK define
PATCH V3 3/5: RK805 set suspend enable and disable is different from rk808
use rk805_regs_ops and rk805_switch_ops
PATCH V3 4/5: fix up the shutdown func
use pm_shutdown_prepare_fn to prepare shutdown
and pm_pwroff_fn pull down gpio to shut down rk805
it will update in the future(after rk808 support gpio func)
PATCH V3 5/5: NO change in V3
change in V2:
PATCH V2 1/5: NO change in V2
PATCH V2 2/5: add rk805 BUCK ILMAX define
PATCH V2 3/5: NO change in V2
PATCH V2 4/5: setting RK805 BUCK ILMAX in pre init
PATCH V2 5/5: Add RK805 device tree bindings document
Elaine Zhang (7):
mfd: rk808: fix up the chip id get failed
mfd: rk808: add rk805 regs addr and ID
regulator: rk808: Add regulator driver for RK805
mfd: rk808: Add RK805 support
clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808
mfd: dt-bindings: Add RK805 device tree bindings document
Documentation/devicetree/bindings/mfd/rk808.txt | 20 +++-
drivers/clk/Kconfig | 4 +-
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 129 +++++++++++++++++++++--
drivers/regulator/Kconfig | 4 +-
drivers/regulator/rk808-regulator.c | 130 ++++++++++++++++++++++++
drivers/rtc/Kconfig | 4 +-
include/linux/mfd/rk808.h | 121 ++++++++++++++++++++++
8 files changed, 401 insertions(+), 15 deletions(-)
--
1.9.1
^ permalink raw reply
* [PATCH V5 4/4] serial: sprd: adjust TIMEOUT to a big value
From: Chunyan Zhang @ 2017-03-27 6:06 UTC (permalink / raw)
To: robh+dt, mark.rutland, gregkh, catalin.marinas, will.deacon, arnd
Cc: mathieu.poirier, orson.zhai, linux-kernel, devicetree,
linux-arm-kernel, zhang.lyra, chunyan.zhang
In-Reply-To: <1490594802-27073-1-git-send-email-chunyan.zhang@spreadtrum.com>
From: Wei Qiao <wei.qiao@spreadtrum.com>
SPRD_TIMEOUT was 256, which is too small to wait until the status
switched to workable in a while loop, so that the earlycon could
not work correctly.
Signed-off-by: Wei Qiao <wei.qiao@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
drivers/tty/serial/sprd_serial.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index d98e3dc..90996ad 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -36,7 +36,7 @@
#define SPRD_FIFO_SIZE 128
#define SPRD_DEF_RATE 26000000
#define SPRD_BAUD_IO_LIMIT 3000000
-#define SPRD_TIMEOUT 256
+#define SPRD_TIMEOUT 256000
/* the offset of serial registers and BITs for them */
/* data registers */
--
2.7.4
^ permalink raw reply related
* [PATCH V5 3/4] dt-bindings: serial: add a new compatible string for SC9860
From: Chunyan Zhang @ 2017-03-27 6:06 UTC (permalink / raw)
To: robh+dt, mark.rutland, gregkh, catalin.marinas, will.deacon, arnd
Cc: mathieu.poirier, orson.zhai, linux-kernel, devicetree,
linux-arm-kernel, zhang.lyra, chunyan.zhang
In-Reply-To: <1490594802-27073-1-git-send-email-chunyan.zhang@spreadtrum.com>
SC9860 use the same serial device which SC9836 uses, so added a new
compatible string to support SC9860 as well, also added an example
of how to describe this serial device in DT.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/serial/sprd-uart.txt | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
index 2aff0f2..cab40f0 100644
--- a/Documentation/devicetree/bindings/serial/sprd-uart.txt
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -1,7 +1,19 @@
* Spreadtrum serial UART
Required properties:
-- compatible: must be "sprd,sc9836-uart"
+- compatible: must be one of:
+ * "sprd,sc9836-uart"
+ * "sprd,sc9860-uart", "sprd,sc9836-uart"
+
- reg: offset and length of the register set for the device
- interrupts: exactly one interrupt specifier
- clocks: phandles to input clocks.
+
+Example:
+ uart0: serial@0 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ };
--
2.7.4
^ permalink raw reply related
* [PATCH V5 2/4] dt-bindings: arm: Add bindings for SP9860G
From: Chunyan Zhang @ 2017-03-27 6:06 UTC (permalink / raw)
To: robh+dt, mark.rutland, gregkh, catalin.marinas, will.deacon, arnd
Cc: mathieu.poirier, orson.zhai, linux-kernel, devicetree,
linux-arm-kernel, zhang.lyra, chunyan.zhang
In-Reply-To: <1490594802-27073-1-git-send-email-chunyan.zhang@spreadtrum.com>
Added bindings for Spreadtrum SP9860G board and SC9860 SoC.
This patch also revised bindings of SC9836 to make the format
more clear.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/sprd.txt | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
index 31a629d..3df034b 100644
--- a/Documentation/devicetree/bindings/arm/sprd.txt
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -1,11 +1,14 @@
Spreadtrum SoC Platforms Device Tree Bindings
----------------------------------------------------
-Sharkl64 is a Spreadtrum's SoC Platform which is based
-on ARM 64-bit processor.
+SC9836 openphone Board
+Required root node properties:
+ - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
-SC9836 openphone board with SC9836 SoC based on the
-Sharkl64 Platform shall have the following properties.
+SC9860 SoC
+Required root node properties:
+ - compatible = "sprd,sc9860"
+SP9860G 3GFHD Board
Required root node properties:
- - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
+ - compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
--
2.7.4
^ permalink raw reply related
* [PATCH V5 1/4] arm64: dts: Add basic DT to support Spreadtrum's SP9860G
From: Chunyan Zhang @ 2017-03-27 6:06 UTC (permalink / raw)
To: robh+dt, mark.rutland, gregkh, catalin.marinas, will.deacon, arnd
Cc: mathieu.poirier, orson.zhai, linux-kernel, devicetree,
linux-arm-kernel, zhang.lyra, chunyan.zhang
In-Reply-To: <1490594802-27073-1-git-send-email-chunyan.zhang@spreadtrum.com>
From: Orson Zhai <orson.zhai@spreadtrum.com>
SC9860G is a 8 cores of A53 SoC with 4G LTE support SoC from Spreadtrum.
According to regular hierarchy of sprd dts, whale2.dtsi contains SoC
peripherals IP nodes, sc9860.dtsi contains stuff related to ARM core stuff
and sp9860g dts is for the board level.
Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
arch/arm64/boot/dts/sprd/Makefile | 3 +-
arch/arm64/boot/dts/sprd/sc9860.dtsi | 569 ++++++++++++++++++++++++++++++
arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 56 +++
arch/arm64/boot/dts/sprd/whale2.dtsi | 71 ++++
4 files changed, 698 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/sprd/sc9860.dtsi
create mode 100644 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
create mode 100644 arch/arm64/boot/dts/sprd/whale2.dtsi
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index b658c5e..f0535e6 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb
+dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
+ sp9860g-1h10.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
new file mode 100644
index 0000000..cf72728
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -0,0 +1,569 @@
+/*
+ * Spreadtrum SC9860 SoC
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "whale2.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ CPU0: cpu@530000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530000>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU1: cpu@530001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530001>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU2: cpu@530002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530002>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU3: cpu@530003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530003>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU4: cpu@530100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU5: cpu@530101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530101>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU6: cpu@530102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530102>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+
+ CPU7: cpu@530103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x530103>;
+ enable-method = "psci";
+ cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+ };
+ };
+
+ idle-states{
+ entry-method = "arm,psci";
+
+ CORE_PD: core_pd {
+ compatible = "arm,idle-state";
+ entry-latency-us = <1000>;
+ exit-latency-us = <700>;
+ min-residency-us = <2500>;
+ local-timer-stop;
+ arm,psci-suspend-param = <0x00010002>;
+ };
+
+ CLUSTER_PD: cluster_pd {
+ compatible = "arm,idle-state";
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ local-timer-stop;
+ arm,psci-suspend-param = <0x01010003>;
+ };
+ };
+
+ gic: interrupt-controller@12001000 {
+ compatible = "arm,gic-400";
+ reg = <0 0x12001000 0 0x1000>,
+ <0 0x12002000 0 0x2000>,
+ <0 0x12004000 0 0x2000>,
+ <0 0x12006000 0 0x2000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8)
+ | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CPU0>,
+ <&CPU1>,
+ <&CPU2>,
+ <&CPU3>,
+ <&CPU4>,
+ <&CPU5>,
+ <&CPU6>,
+ <&CPU7>;
+ };
+
+ soc {
+ funnel@10001000 { /* SoC Funnel */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x10001000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ soc_funnel_out_port: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ soc_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&main_funnel_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ soc_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpioint =
+ <&stm_out_port>;
+ };
+ };
+ };
+ };
+
+ etb@10003000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x10003000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ port {
+ etb_in: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&soc_funnel_out_port>;
+ };
+ };
+ };
+
+ stm@10006000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0 0x10006000 0 0x1000>,
+ <0 0x01000000 0 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint =
+ <&soc_funnel_in_port1>;
+ };
+ };
+ };
+
+ funnel@11001000 { /* Cluster0 Funnel */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster0_funnel_out_port: endpoint {
+ remote-endpoint =
+ <&cluster0_etf_in>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ cluster0_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ cluster0_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+
+ port@3 {
+ reg = <2>;
+ cluster0_funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ cluster0_funnel_in_port3: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+ };
+
+ funnel@11002000 { /* Cluster1 Funnel */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x11002000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster1_funnel_out_port: endpoint {
+ remote-endpoint =
+ <&cluster1_etf_in>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ cluster1_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm4_out>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ cluster1_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm5_out>;
+ };
+ };
+
+ port@3 {
+ reg = <2>;
+ cluster1_funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm6_out>;
+ };
+ };
+
+ port@4 {
+ reg = <3>;
+ cluster1_funnel_in_port3: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm7_out>;
+ };
+ };
+ };
+ };
+
+ etf@11003000 { /* ETF on Cluster0 */
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x11003000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster0_etf_out: endpoint {
+ remote-endpoint =
+ <&main_funnel_in_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ cluster0_etf_in: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&cluster0_funnel_out_port>;
+ };
+ };
+ };
+ };
+
+ etf@11004000 { /* ETF on Cluster1 */
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x11004000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster1_etf_out: endpoint {
+ remote-endpoint =
+ <&main_funnel_in_port1>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ cluster1_etf_in: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&cluster1_funnel_out_port>;
+ };
+ };
+ };
+ };
+
+ funnel@11005000 { /* Main Funnel */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x11005000 0 0x1000>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ main_funnel_out_port: endpoint {
+ remote-endpoint =
+ <&soc_funnel_in_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ main_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&cluster0_etf_out>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ main_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&cluster1_etf_out>;
+ };
+ };
+ };
+ };
+
+ etm@11440000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11440000 0 0x1000>;
+ cpu = <&CPU0>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port0>;
+ };
+ };
+ };
+
+ etm@11540000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11540000 0 0x1000>;
+ cpu = <&CPU1>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port1>;
+ };
+ };
+ };
+
+ etm@11640000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11640000 0 0x1000>;
+ cpu = <&CPU2>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port2>;
+ };
+ };
+ };
+
+ etm@11740000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11740000 0 0x1000>;
+ cpu = <&CPU3>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port3>;
+ };
+ };
+ };
+
+ etm@11840000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11840000 0 0x1000>;
+ cpu = <&CPU4>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port0>;
+ };
+ };
+ };
+
+ etm@11940000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11940000 0 0x1000>;
+ cpu = <&CPU5>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port1>;
+ };
+ };
+ };
+
+ etm@11a40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11a40000 0 0x1000>;
+ cpu = <&CPU6>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port2>;
+ };
+ };
+ };
+
+ etm@11b40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0x11b40000 0 0x1000>;
+ cpu = <&CPU7>;
+ clocks = <&ext_26m>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port3>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
new file mode 100644
index 0000000..ae0b28c
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -0,0 +1,56 @@
+/*
+ * Spreadtrum SP9860g board
+ *
+ * Copyright (C) 2017, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "sc9860.dtsi"
+
+/ {
+ model = "Spreadtrum SP9860G 3GFHD Board";
+
+ compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
+
+ aliases {
+ serial0 = &uart0; /* for Bluetooth */
+ serial1 = &uart1; /* UART console */
+ serial2 = &uart2; /* Reserved */
+ serial3 = &uart3; /* for GPS */
+ };
+
+ memory{
+ device_type = "memory";
+ reg = <0x0 0x80000000 0 0x60000000>,
+ <0x1 0x80000000 0 0x60000000>;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
new file mode 100644
index 0000000..7c217c5
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -0,0 +1,71 @@
+/*
+ * Spreadtrum Whale2 platform peripherals
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ap-apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x70000000 0x10000000>;
+
+ uart0: serial@0 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart1: serial@100000 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x100000 0x100>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart2: serial@200000 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x200000 0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart3: serial@300000 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x300000 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_26m>;
+ status = "disabled";
+ };
+ };
+
+ };
+
+ ext_26m: ext-26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "ext_26m";
+ };
+};
--
2.7.4
^ permalink raw reply related
* [PATCH V5 0/4] Add Spreadtrum SP9860G support
From: Chunyan Zhang @ 2017-03-27 6:06 UTC (permalink / raw)
To: robh+dt, mark.rutland, gregkh, catalin.marinas, will.deacon, arnd
Cc: mathieu.poirier, orson.zhai, linux-kernel, devicetree,
linux-arm-kernel, zhang.lyra, chunyan.zhang
SC9860 is a Spreadtrum SoC with eight Cortex A53, which are divided
into 4 Big cores and 4 little cores.
This patch-set provides a basic configuration for SC9860 in device tree
to make it run to console. After this we will continue to submit other
device drivers step by step, which are using on most of Spreadtrum's SoCs.
Changes from v4:
* Addressed Rob's comments
use serial@0 instead of serial@000000;
* Added Rob's Acked-by on patch 2/4 and 3/4.
Changes from v3:
* Rebased v4.11-rc2;
* Added Reviewed-by of Mathieu;
* Addressed Rob's comments:
- Documented sprd serial competible according to Rob's suggestion
- Revised serial node name to match its offset;
* Added STM device node in dt.
Changes from v2:
* Addressed comments from Mathieu:
- Removed CoreSight devices' lables from DT;
- Added another level of imbrication for ETFs which have more than one port;
* Addressed comments from Rob:
- Switched to use SPDX-License-Identifier tag instead;
- Moved the 26m fixed clock node to top level in DT;
- Splited the patch into two, since they were revising two dt-bindings;
- Removed redundant space from sprd-usrt.txt;
- Removed useless property from the sprd_uart example of DT configuration.
Changes from v1:
* Removed useless idle-state node 'deep_sleep' from DT
* Removed useless property 'sc-id' from DT
* Removed 'clock-frequency' property from the node 'timer'
* Added another compatible string '"arm,cortex-a53-pmu"' and property
'interrupt-affinity' for pmu
* Kept using the existed compatible string of sprd_serial driver, and added
a new one for sc9860 in DT.
Thanks,
Chunyan
Chunyan Zhang (2):
dt-bindings: arm: Add bindings for SP9860G
dt-bindings: serial: add a new compatible string for SC9860
Orson Zhai (1):
arm64: dts: Add basic DT to support Spreadtrum's SP9860G
Wei Qiao (1):
serial: sprd: adjust TIMEOUT to a big value
Documentation/devicetree/bindings/arm/sprd.txt | 13 +-
.../devicetree/bindings/serial/sprd-uart.txt | 14 +-
arch/arm64/boot/dts/sprd/Makefile | 3 +-
arch/arm64/boot/dts/sprd/sc9860.dtsi | 569 +++++++++++++++++++++
arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 56 ++
arch/arm64/boot/dts/sprd/whale2.dtsi | 71 +++
drivers/tty/serial/sprd_serial.c | 2 +-
7 files changed, 720 insertions(+), 8 deletions(-)
create mode 100644 arch/arm64/boot/dts/sprd/sc9860.dtsi
create mode 100644 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
create mode 100644 arch/arm64/boot/dts/sprd/whale2.dtsi
--
2.7.4
^ permalink raw reply
* Re: [PATCH 1/2] drm/bridge: ti-tfp410: support hpd via gpio
From: Archit Taneja @ 2017-03-27 5:58 UTC (permalink / raw)
To: Christopher Spinrath, Jyri Sarha
Cc: Mark Rutland, devicetree@vger.kernel.org,
Russell King - ARM Linux, DRI mailing list, robh+dt@kernel.org,
Igor Grinberg, Sascha Hauer, Fabio Estevam, Shawn Guo,
linux-arm-kernel@lists.infradead.org
In-Reply-To: <6dfb2b66ec2a408dabe80d703f411ce0@rwthex-s1-b.rwth-ad.de>
Hi,
On 03/07/2017 03:21 AM, Christopher Spinrath wrote:
> Hi Fabio,
>
> On 03/06/2017 10:46 PM, Fabio Estevam wrote:
>> Hi Christopher,
>>
>> On Mon, Mar 6, 2017 at 6:40 PM, <christopher.spinrath@rwth-aachen.de> wrote:
>>> From: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
>>>
>>> On some boards the hpd pin of a hdmi connector is wired up to a gpio
>>> pin. Since in the DRM world the tfp410 driver is responsible for
>>> handling the connector, add support for hpd gpios in this very driver.
>>>
>>> Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
>>> ---
>>> drivers/gpu/drm/bridge/ti-tfp410.c | 72 ++++++++++++++++++++++++++++++++++++--
>>
>> It would be nice to add 'hpd-gpios' property in the binding doc as well:
>> Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
>
> The hpd-gpios property does *not* belong to the ti,tfp410 binding but to the hdmi-connector one
> where it is already documented:
> Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
>
> Unfortunatly, there is no dedicated driver for the connector in Linux; the connector properties have
> to be handled by the encoder (here the tfp410) driver. Note that this already happens for the
> ddc-i2c-bus property.
>
The patch looks good to me.
Jyri,
Is it possible for you to verify this on Beaglebone platform?
Thanks,
Archit
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* Re: [PATCH] of: add stub for of_n_addr_cells
From: Tobias Regnery @ 2017-03-27 5:54 UTC (permalink / raw)
To: Arnd Bergmann
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, horms-/R6kz+dDXgpPR4JQBCEnsQ
In-Reply-To: <CAK8P3a3ojRSpC3GVU6P05GEtj7AHxrYD_ZrAZaa68KT14H9Hew-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On 24.03.17, Arnd Bergmann wrote:
> On Fri, Mar 24, 2017 at 11:39 AM, Tobias Regnery
> <tobias.regnery-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > With CONFIG_OF=n and CONFIG_COMPILE_TEST=y the rcar pci-e driver fails to
> > build on arm:
> >
> > drivers/pci/host/pcie-rcar.c: In function 'pci_dma_range_parser_init':
> > drivers/pci/host/pcie-rcar.c:1035:16: error: implicit declaration of function 'of_n_addr_cells' [-Werror=implicit-function-declaration]
> > parser->pna = of_n_addr_cells(node);
> > ^~~~~~~~~~~~~~~
> >
> > Fix this by adding an inline stub for of_n_addr_cells
> >
> > Signed-off-by: Tobias Regnery <tobias.regnery-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > ---
> > This is against next-20140324
> >
> > include/linux/of.h | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/include/linux/of.h b/include/linux/of.h
> > index 21e6323de0f3..9978c918222e 100644
> > --- a/include/linux/of.h
> > +++ b/include/linux/of.h
> > @@ -710,6 +710,11 @@ static inline struct device_node *of_get_cpu_node(int cpu,
> > return NULL;
> > }
> >
> > +static inline int of_n_addr_cells(struct device_node *np)
> > +{
> > + return 0;
> > +}
> > +
>
> This looks good, but we should also do the same thing for of_n_size_cells().
>
> I think I sent something like this a few years ago, but never resubmitted it
> when it was ignored at first.
>
> Arnd
This seems sensible, I can send an updated patch with this change or I can
send it as a separate patch, whatever the maintainers prefer.
--
Tobias
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* RE: [alsa-devel] [PATCH] ASoC: Add support for Maxim Integrated MAX98927 Amplifier
From: Ryans Lee @ 2017-03-27 5:45 UTC (permalink / raw)
To: Charles Keepax
Cc: lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
perex-/Fr2/VpizcU@public.gmane.org,
tiwai-IBi9RG/b67k@public.gmane.org,
kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
bardliao-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org,
nh6z-fFIq/eER6g8@public.gmane.org,
KCHSU0-KrzQf0k3Iz9BDgjK7y7TUQ@public.gmane.org,
axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org,
romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org,
petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org,
srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
oder_chiou-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org
In-Reply-To: <20170320141407.GS6986-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
> -----Original Message-----
> From: Charles Keepax [mailto:ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org]
> Sent: Monday, March 20, 2017 7:14 AM
> To: Ryans Lee <RyanS.Lee-zxKO94PEStzToO697jQleEEOCMrvLtNR@public.gmane.org>
> Cc: lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org; broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org; robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org;
> mark.rutland-5wv7dgnIgG8@public.gmane.org; perex-/Fr2/VpizcU@public.gmane.org; tiwai-IBi9RG/b67k@public.gmane.org;
> kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org; arnd-r2nGTMty4D4@public.gmane.org; lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org;
> bardliao-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org; nh6z-fFIq/eER6g8@public.gmane.org; KCHSU0-KrzQf0k3Iz9BDgjK7y7TUQ@public.gmane.org;
> axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org; romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org; petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org;
> srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org; oder_chiou-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org;
> Paul.Handrigan-jGc1dHjMKG3QT0dZR+AlfA@public.gmane.org; alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org;
> devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;
> dgreid-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org
> Subject: Re: [alsa-devel] [PATCH] ASoC: Add support for Maxim
> Integrated MAX98927 Amplifier
>
> EXTERNAL EMAIL
>
>
>
> On Mon, Mar 20, 2017 at 09:40:23AM +0900, Ryan Lee wrote:
>> Signed-off-by: Ryan Lee <ryans.lee-zxKO94PEStzToO697jQleEEOCMrvLtNR@public.gmane.org>
>> ---
>> Resubmit the intial version of MAX98927 driver. Added all fixes into the initial patch.
> <snip>
>> +static int max98927_reg_get(struct snd_kcontrol *kcontrol,
>> + struct snd_ctl_elem_value *ucontrol, unsigned int reg,
>> + unsigned int mask, unsigned int shift) {
>> + struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
>> + struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
>> + int data;
>> +
>> + regmap_read(max98927->regmap, reg, &data);
>> + ucontrol->value.integer.value[0] = (data & mask) >> shift;
>> + return 0;
>> +}
>> +
>> +static int max98927_reg_put(struct snd_kcontrol *kcontrol,
>> + struct snd_ctl_elem_value *ucontrol, unsigned int reg,
>> + unsigned int mask, unsigned int shift) {
>> + struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
>> + struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
>> + unsigned int sel = ucontrol->value.integer.value[0];
>> +
>> + regmap_update_bits(max98927->regmap, reg, mask, sel << shift);
>> + dev_dbg(codec->dev, "%s: register 0x%02X, value 0x%02X\n",
>> + __func__, reg, sel);
>> + return 0;
>> +}
>
> These functions look a lot like they duplicate things the ASoC core does?
You're right. I removed 'max98927_reg_get' and 'max98927_reg_put' function to avoid duplication.
>
> <snip>
>> +static int max98927_boost_voltage_get(struct snd_kcontrol *kcontrol,
>> + struct snd_ctl_elem_value *ucontrol) {
>> + return max98927_reg_get(kcontrol, ucontrol,
>> + MAX98927_R0040_BOOST_CTRL0,
>> + MAX98927_BOOST_CTRL0_VOUT_MASK, 0); }
>> +
>
> And can't these just be specified in the normal way with the register information attached to the control? There doesn't seem to be any special behaviour being added here. Apologies if I am missing something here.
Thank you for your feedback. Now SOC_ENUM_EXT was replaced by SOC_ENUM. SOC_SINGLE_EXT was also replaced by SOC_SINGLE. Above function is no longer being used.
>
> Thanks,
> Charles
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v2] ASoC: Add support for Maxim Integrated MAX98927 Amplifier
From: Ryan Lee @ 2017-03-27 5:32 UTC (permalink / raw)
To: lgirdwood, broonie, robh+dt, mark.rutland, perex, tiwai,
kuninori.morimoto.gx, arnd, ckeepax, lars, bardliao, nh6z, KCHSU0,
axel.lin, romain.perier, petr, srinivas.kandagatla, oder_chiou,
Paul.Handrigan, ryans.lee, alsa-devel, devicetree, linux-kernel
Cc: dgreid
In-Reply-To: <20170320141407.GS6986@localhost.localdomain>
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
---
v2: Removed local register read/write function to avoid duplication of ASoC core function.
.../devicetree/bindings/sound/max98927.txt | 39 +
sound/soc/codecs/Kconfig | 5 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/max98927.c | 826 +++++++++++++++++++++
sound/soc/codecs/max98927.h | 267 +++++++
5 files changed, 1139 insertions(+)
create mode 100755 Documentation/devicetree/bindings/sound/max98927.txt
mode change 100644 => 100755 sound/soc/codecs/Kconfig
mode change 100644 => 100755 sound/soc/codecs/Makefile
create mode 100755 sound/soc/codecs/max98927.c
create mode 100755 sound/soc/codecs/max98927.h
diff --git a/Documentation/devicetree/bindings/sound/max98927.txt b/Documentation/devicetree/bindings/sound/max98927.txt
new file mode 100755
index 0000000..d610879
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98927.txt
@@ -0,0 +1,39 @@
+max98927 audio CODEC
+
+This device supports I2C.
+
+Required properties:
+
+ - compatible : "maxim,max98927"
+
+ - maxim,vmon-slot-no : slot number used to send voltage information
+ or in inteleave mode this will be used as
+ interleave slot.
+ This property can be set to values from 0 to 15 for slot 0 to 15.
+ Default value is 0.
+
+ - maxim,imon-slot-no : slot number used to send current information
+ This property can be set to values from 0 to 15 for slot 0 to 15.
+ Default value is 0.
+
+ - maxim,interleave-mode : When using two MAX98927 in a system it is
+ possible to create ADC data that that will
+ overflow the frame size. Digital Audio Interleave
+ mode provides a means to output VMON and IMON data
+ from two devices on a single DOUT line when running
+ smaller frames sizes such as 32 BCLKS per LRCLK or
+ 48 BCLKS per LRCLK.
+ This property can be set to values from 0 to 1 for off and on.
+ Default value is 0.
+
+ - reg : the I2C address of the device for I2C
+
+Example:
+
+codec: max98927@3a {
+ compatible = "maxim,max98927";
+ maxim,vmon-slot-no = <0>;
+ maxim,imon-slot-no = <1>;
+ maxim,interleave-mode = <0>;
+ reg = <0x3a>;
+};
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
old mode 100644
new mode 100755
index e49e9da..cbdc8aa
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -89,6 +89,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_MAX9867 if I2C
select SND_SOC_MAX98925 if I2C
select SND_SOC_MAX98926 if I2C
+ select SND_SOC_MAX98927 if I2C
select SND_SOC_MAX9850 if I2C
select SND_SOC_MAX9860 if I2C
select SND_SOC_MAX9768 if I2C
@@ -588,6 +589,10 @@ config SND_SOC_MAX98925
config SND_SOC_MAX98926
tristate
+config SND_SOC_MAX98927
+ tristate "Maxim Integrated MAX98927 Speaker Amplifier"
+ depends on I2C
+
config SND_SOC_MAX9850
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
old mode 100644
new mode 100755
index 1796cb9..187a639
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -84,6 +84,7 @@ snd-soc-max98371-objs := max98371.o
snd-soc-max9867-objs := max9867.o
snd-soc-max98925-objs := max98925.o
snd-soc-max98926-objs := max98926.o
+snd-soc-max98927-objs := max98927.o
snd-soc-max9850-objs := max9850.o
snd-soc-max9860-objs := max9860.o
snd-soc-mc13783-objs := mc13783.o
@@ -313,6 +314,7 @@ obj-$(CONFIG_SND_SOC_MAX98357A) += snd-soc-max98357a.o
obj-$(CONFIG_SND_SOC_MAX9867) += snd-soc-max9867.o
obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o
obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o
+obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o
obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o
obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o
diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c
new file mode 100755
index 0000000..784a106
--- /dev/null
+++ b/sound/soc/codecs/max98927.c
@@ -0,0 +1,826 @@
+/*
+ * max98927.c -- MAX98927 ALSA Soc Audio driver
+ *
+ * Copyright (C) 2016 Maxim Integrated Products
+ * Author: Ryan Lee <ryans.lee@maximintegrated.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/cdev.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <sound/tlv.h>
+#include "max98927.h"
+
+static struct reg_default max98927_reg[] = {
+ {MAX98927_R0001_INT_RAW1, 0x00},
+ {MAX98927_R0002_INT_RAW2, 0x00},
+ {MAX98927_R0003_INT_RAW3, 0x00},
+ {MAX98927_R0004_INT_STATE1, 0x00},
+ {MAX98927_R0005_INT_STATE2, 0x00},
+ {MAX98927_R0006_INT_STATE3, 0x00},
+ {MAX98927_R0007_INT_FLAG1, 0x00},
+ {MAX98927_R0008_INT_FLAG2, 0x00},
+ {MAX98927_R0009_INT_FLAG3, 0x00},
+ {MAX98927_R000A_INT_EN1, 0x00},
+ {MAX98927_R000B_INT_EN2, 0x00},
+ {MAX98927_R000C_INT_EN3, 0x00},
+ {MAX98927_R000D_INT_FLAG_CLR1, 0x00},
+ {MAX98927_R000E_INT_FLAG_CLR2, 0x00},
+ {MAX98927_R000F_INT_FLAG_CLR3, 0x00},
+ {MAX98927_R0010_IRQ_CTRL, 0x00},
+ {MAX98927_R0011_CLK_MON, 0x00},
+ {MAX98927_R0012_WDOG_CTRL, 0x00},
+ {MAX98927_R0013_WDOG_RST, 0x00},
+ {MAX98927_R0014_MEAS_ADC_THERM_WARN_THRESH, 0x00},
+ {MAX98927_R0015_MEAS_ADC_THERM_SHDN_THRESH, 0x00},
+ {MAX98927_R0016_MEAS_ADC_THERM_HYSTERESIS, 0x00},
+ {MAX98927_R0017_PIN_CFG, 0x55},
+ {MAX98927_R0018_PCM_RX_EN_A, 0x00},
+ {MAX98927_R0019_PCM_RX_EN_B, 0x00},
+ {MAX98927_R001A_PCM_TX_EN_A, 0x00},
+ {MAX98927_R001B_PCM_TX_EN_B, 0x00},
+ {MAX98927_R001C_PCM_TX_HIZ_CTRL_A, 0x00},
+ {MAX98927_R001D_PCM_TX_HIZ_CTRL_B, 0x00},
+ {MAX98927_R001E_PCM_TX_CH_SRC_A, 0x00},
+ {MAX98927_R001F_PCM_TX_CH_SRC_B, 0x00},
+ {MAX98927_R0020_PCM_MODE_CFG, 0x40},
+ {MAX98927_R0021_PCM_MASTER_MODE, 0x00},
+ {MAX98927_R0022_PCM_CLK_SETUP, 0x22},
+ {MAX98927_R0023_PCM_SR_SETUP1, 0x00},
+ {MAX98927_R0024_PCM_SR_SETUP2, 0x00},
+ {MAX98927_R0025_PCM_TO_SPK_MONOMIX_A, 0x00},
+ {MAX98927_R0026_PCM_TO_SPK_MONOMIX_B, 0x00},
+ {MAX98927_R0027_ICC_RX_EN_A, 0x00},
+ {MAX98927_R0028_ICC_RX_EN_B, 0x00},
+ {MAX98927_R002B_ICC_TX_EN_A, 0x00},
+ {MAX98927_R002C_ICC_TX_EN_B, 0x00},
+ {MAX98927_R002E_ICC_HIZ_MANUAL_MODE, 0x00},
+ {MAX98927_R002F_ICC_TX_HIZ_EN_A, 0x00},
+ {MAX98927_R0030_ICC_TX_HIZ_EN_B, 0x00},
+ {MAX98927_R0031_ICC_LNK_EN, 0x00},
+ {MAX98927_R0032_PDM_TX_EN, 0x00},
+ {MAX98927_R0033_PDM_TX_HIZ_CTRL, 0x00},
+ {MAX98927_R0034_PDM_TX_CTRL, 0x00},
+ {MAX98927_R0035_PDM_RX_CTRL, 0x00},
+ {MAX98927_R0036_AMP_VOL_CTRL, 0x00},
+ {MAX98927_R0037_AMP_DSP_CFG, 0x02},
+ {MAX98927_R0038_TONE_GEN_DC_CFG, 0x00},
+ {MAX98927_R0039_DRE_CTRL, 0x01},
+ {MAX98927_R003A_AMP_EN, 0x00},
+ {MAX98927_R003B_SPK_SRC_SEL, 0x00},
+ {MAX98927_R003C_SPK_GAIN, 0x00},
+ {MAX98927_R003D_SSM_CFG, 0x01},
+ {MAX98927_R003E_MEAS_EN, 0x00},
+ {MAX98927_R003F_MEAS_DSP_CFG, 0x04},
+ {MAX98927_R0040_BOOST_CTRL0, 0x00},
+ {MAX98927_R0041_BOOST_CTRL3, 0x00},
+ {MAX98927_R0042_BOOST_CTRL1, 0x00},
+ {MAX98927_R0043_MEAS_ADC_CFG, 0x00},
+ {MAX98927_R0044_MEAS_ADC_BASE_MSB, 0x00},
+ {MAX98927_R0045_MEAS_ADC_BASE_LSB, 0x00},
+ {MAX98927_R0046_ADC_CH0_DIVIDE, 0x00},
+ {MAX98927_R0047_ADC_CH1_DIVIDE, 0x00},
+ {MAX98927_R0048_ADC_CH2_DIVIDE, 0x00},
+ {MAX98927_R0049_ADC_CH0_FILT_CFG, 0x00},
+ {MAX98927_R004A_ADC_CH1_FILT_CFG, 0x00},
+ {MAX98927_R004B_ADC_CH2_FILT_CFG, 0x00},
+ {MAX98927_R004C_MEAS_ADC_CH0_READ, 0x00},
+ {MAX98927_R004D_MEAS_ADC_CH1_READ, 0x00},
+ {MAX98927_R004E_MEAS_ADC_CH2_READ, 0x00},
+ {MAX98927_R0051_BROWNOUT_STATUS, 0x00},
+ {MAX98927_R0052_BROWNOUT_EN, 0x00},
+ {MAX98927_R0053_BROWNOUT_INFINITE_HOLD, 0x00},
+ {MAX98927_R0054_BROWNOUT_INFINITE_HOLD_CLR, 0x00},
+ {MAX98927_R0055_BROWNOUT_LVL_HOLD, 0x00},
+ {MAX98927_R005A_BROWNOUT_LVL1_THRESH, 0x00},
+ {MAX98927_R005B_BROWNOUT_LVL2_THRESH, 0x00},
+ {MAX98927_R005C_BROWNOUT_LVL3_THRESH, 0x00},
+ {MAX98927_R005D_BROWNOUT_LVL4_THRESH, 0x00},
+ {MAX98927_R005E_BROWNOUT_THRESH_HYSTERYSIS, 0x00},
+ {MAX98927_R005F_BROWNOUT_AMP_LIMITER_ATK_REL, 0x00},
+ {MAX98927_R0060_BROWNOUT_AMP_GAIN_ATK_REL, 0x00},
+ {MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE, 0x00},
+ {MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT, 0x00},
+ {MAX98927_R0073_BROWNOUT_LVL1_AMP1_CTRL1, 0x00},
+ {MAX98927_R0074_BROWNOUT_LVL1_AMP1_CTRL2, 0x00},
+ {MAX98927_R0075_BROWNOUT_LVL1_AMP1_CTRL3, 0x00},
+ {MAX98927_R0076_BROWNOUT_LVL2_CUR_LIMIT, 0x00},
+ {MAX98927_R0077_BROWNOUT_LVL2_AMP1_CTRL1, 0x00},
+ {MAX98927_R0078_BROWNOUT_LVL2_AMP1_CTRL2, 0x00},
+ {MAX98927_R0079_BROWNOUT_LVL2_AMP1_CTRL3, 0x00},
+ {MAX98927_R007A_BROWNOUT_LVL3_CUR_LIMIT, 0x00},
+ {MAX98927_R007B_BROWNOUT_LVL3_AMP1_CTRL1, 0x00},
+ {MAX98927_R007C_BROWNOUT_LVL3_AMP1_CTRL2, 0x00},
+ {MAX98927_R007D_BROWNOUT_LVL3_AMP1_CTRL3, 0x00},
+ {MAX98927_R007E_BROWNOUT_LVL4_CUR_LIMIT, 0x00},
+ {MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1, 0x00},
+ {MAX98927_R0080_BROWNOUT_LVL4_AMP1_CTRL2, 0x00},
+ {MAX98927_R0081_BROWNOUT_LVL4_AMP1_CTRL3, 0x00},
+ {MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM, 0x00},
+ {MAX98927_R0083_ENV_TRACK_BOOST_VOUT_DELAY, 0x00},
+ {MAX98927_R0084_ENV_TRACK_REL_RATE, 0x00},
+ {MAX98927_R0085_ENV_TRACK_HOLD_RATE, 0x00},
+ {MAX98927_R0086_ENV_TRACK_CTRL, 0x00},
+ {MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ, 0x00},
+ {MAX98927_R00FF_GLOBAL_SHDN, 0x00},
+ {MAX98927_R0100_SOFT_RESET, 0x00},
+ {MAX98927_R01FF_REV_ID, 0x40},
+};
+
+static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+ unsigned int mode = 0;
+ unsigned int invert = 0;
+
+ dev_dbg(codec->dev, "%s: fmt 0x%08X\n", __func__, fmt);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ mode = MAX98927_PCM_MASTER_MODE_SLAVE;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ max98927->master = true;
+ mode = MAX98927_PCM_MASTER_MODE_MASTER;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ mode = MAX98927_PCM_MASTER_MODE_HYBRID;
+ default:
+ dev_err(codec->dev, "DAI clock mode unsupported");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0021_PCM_MASTER_MODE,
+ MAX98927_PCM_MASTER_MODE_MASK,
+ mode);
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ invert = MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE;
+ break;
+ default:
+ dev_err(codec->dev, "DAI invert mode unsupported");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0020_PCM_MODE_CFG,
+ MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE,
+ invert);
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ max98927->iface |= SND_SOC_DAIFMT_I2S;
+
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ max98927->iface |= SND_SOC_DAIFMT_LEFT_J;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0020_PCM_MODE_CFG,
+ max98927->iface, max98927->iface);
+
+ /* pcm channel configuration */
+ if (max98927->iface & (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_LEFT_J))
+ regmap_write(max98927->regmap,
+ MAX98927_R0018_PCM_RX_EN_A,
+ MAX98927_PCM_RX_CH0_EN|
+ MAX98927_PCM_RX_CH1_EN);
+
+ return 0;
+}
+
+/* codec MCLK rate in master mode */
+static const int rate_table[] = {
+ 5644800, 6000000, 6144000, 6500000,
+ 9600000, 11289600, 12000000, 12288000,
+ 13000000, 19200000,
+};
+
+static int max98927_set_clock(struct max98927_priv *max98927,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_codec *codec = max98927->codec;
+ /* BCLK/LRCLK ratio calculation */
+ int blr_clk_ratio = params_channels(params) * max98927->ch_size;
+ int reg = MAX98927_R0022_PCM_CLK_SETUP;
+ int mask = MAX98927_PCM_CLK_SETUP_BSEL_MASK;
+ int value;
+
+ if (max98927->master) {
+ int i;
+ /* match rate to closest value */
+ for (i = 0; i < ARRAY_SIZE(rate_table); i++) {
+ if (rate_table[i] >= max98927->sysclk)
+ break;
+ }
+ if (i == ARRAY_SIZE(rate_table)) {
+ dev_err(codec->dev, "failed to find proper clock rate.\n");
+ return -EINVAL;
+ }
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0021_PCM_MASTER_MODE,
+ MAX98927_PCM_MASTER_MODE_MCLK_MASK,
+ i << MAX98927_PCM_MASTER_MODE_MCLK_RATE_SHIFT);
+ }
+
+ switch (blr_clk_ratio) {
+ case 32:
+ value = 2;
+ break;
+ case 48:
+ value = 3;
+ break;
+ case 64:
+ value = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+ regmap_update_bits(max98927->regmap, reg, mask, value);
+ return 0;
+}
+
+static int max98927_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+ unsigned int sampling_rate = 0;
+ unsigned int chan_sz = 0;
+
+ /* pcm mode configuration */
+ switch (snd_pcm_format_width(params_format(params))) {
+ case 16:
+ chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_16;
+ max98927->ch_size = 16;
+ break;
+ case 24:
+ chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_24;
+ max98927->ch_size = 24;
+ break;
+ case 32:
+ chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_32;
+ max98927->ch_size = 32;
+ break;
+ default:
+ dev_err(codec->dev, "format unsupported %d",
+ params_format(params));
+ goto err;
+ }
+
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0020_PCM_MODE_CFG,
+ MAX98927_PCM_MODE_CFG_CHANSZ_MASK, chan_sz);
+
+ dev_dbg(codec->dev, "format supported %d",
+ params_format(params));
+
+ /* sampling rate configuration */
+ switch (params_rate(params)) {
+ case 8000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_8000;
+ break;
+ case 11025:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_11025;
+ break;
+ case 12000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_12000;
+ break;
+ case 16000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_16000;
+ break;
+ case 22050:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_22050;
+ break;
+ case 24000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_24000;
+ break;
+ case 32000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_32000;
+ break;
+ case 44100:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_44100;
+ break;
+ case 48000:
+ sampling_rate |= MAX98927_PCM_SR_SET1_SR_48000;
+ break;
+ default:
+ dev_err(codec->dev, "rate %d not supported\n",
+ params_rate(params));
+ goto err;
+ }
+ /* set DAI_SR to correct LRCLK frequency */
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0023_PCM_SR_SETUP1,
+ MAX98927_PCM_SR_SET1_SR_MASK,
+ sampling_rate);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0024_PCM_SR_SETUP2,
+ MAX98927_PCM_SR_SET2_SR_MASK,
+ sampling_rate << MAX98927_PCM_SR_SET2_SR_SHIFT);
+
+ /* set sampling rate of IV */
+ if (max98927->interleave_mode &&
+ sampling_rate > MAX98927_PCM_SR_SET1_SR_16000)
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0024_PCM_SR_SETUP2,
+ MAX98927_PCM_SR_SET2_IVADC_SR_MASK,
+ sampling_rate - 3);
+ else
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R0024_PCM_SR_SETUP2,
+ MAX98927_PCM_SR_SET2_IVADC_SR_MASK,
+ sampling_rate);
+ return max98927_set_clock(max98927, params);
+err:
+ return -EINVAL;
+}
+
+#define MAX98927_RATES SNDRV_PCM_RATE_8000_48000
+
+#define MAX98927_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static int max98927_dai_set_sysclk(struct snd_soc_dai *dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+
+ max98927->sysclk = freq;
+ return 0;
+}
+
+static const struct snd_soc_dai_ops max98927_dai_ops = {
+ .set_sysclk = max98927_dai_set_sysclk,
+ .set_fmt = max98927_dai_set_fmt,
+ .hw_params = max98927_dai_hw_params,
+};
+
+static int max98927_dac_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R003A_AMP_EN,
+ MAX98927_AMP_EN_MASK, 1);
+ /* enable VMON and IMON */
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R003E_MEAS_EN,
+ MAX98927_MEAS_V_EN | MAX98927_MEAS_I_EN,
+ MAX98927_MEAS_V_EN | MAX98927_MEAS_I_EN);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R00FF_GLOBAL_SHDN,
+ MAX98927_GLOBAL_EN_MASK, 1);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R00FF_GLOBAL_SHDN,
+ MAX98927_GLOBAL_EN_MASK, 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R003A_AMP_EN,
+ MAX98927_AMP_EN_MASK, 0);
+ /* disable VMON and IMON */
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R003E_MEAS_EN,
+ MAX98927_MEAS_V_EN | MAX98927_MEAS_I_EN, 0);
+ break;
+ default:
+ return 0;
+ }
+ return 0;
+}
+
+static const char * const max98927_switch_text[] = {
+ "Left", "Right", "LeftRight"};
+
+static const struct soc_enum dai_sel_enum =
+ SOC_ENUM_SINGLE(MAX98927_R0025_PCM_TO_SPK_MONOMIX_A,
+ MAX98927_PCM_TO_SPK_MONOMIX_CFG_SHIFT,
+ 3, max98927_switch_text);
+
+static const struct snd_kcontrol_new max98927_dai_controls =
+ SOC_DAPM_ENUM("DAI Sel", dai_sel_enum);
+
+static const struct snd_soc_dapm_widget max98927_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_IN("DAI_OUT", "HiFi Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", MAX98927_R003A_AMP_EN,
+ 0, 0, max98927_dac_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0,
+ &max98927_dai_controls),
+ SND_SOC_DAPM_OUTPUT("BE_OUT"),
+};
+
+static DECLARE_TLV_DB_SCALE(max98927_spk_tlv, 300, 300, 0);
+static DECLARE_TLV_DB_SCALE(max98927_digital_tlv, -1600, 25, 0);
+
+static bool max98927_readable_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX98927_R0001_INT_RAW1 ... MAX98927_R0028_ICC_RX_EN_B:
+ case MAX98927_R002B_ICC_TX_EN_A ... MAX98927_R002C_ICC_TX_EN_B:
+ case MAX98927_R002E_ICC_HIZ_MANUAL_MODE
+ ... MAX98927_R004E_MEAS_ADC_CH2_READ:
+ case MAX98927_R0051_BROWNOUT_STATUS
+ ... MAX98927_R0055_BROWNOUT_LVL_HOLD:
+ case MAX98927_R005A_BROWNOUT_LVL1_THRESH
+ ... MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE:
+ case MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT
+ ... MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ:
+ case MAX98927_R00FF_GLOBAL_SHDN:
+ case MAX98927_R0100_SOFT_RESET:
+ case MAX98927_R01FF_REV_ID:
+ return true;
+ }
+ return false;
+};
+
+static bool max98927_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX98927_R0001_INT_RAW1 ... MAX98927_R0009_INT_FLAG3:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const char * const max98927_boost_voltage_text[] = {
+ "6.5V", "6.625V", "6.75V", "6.875V", "7V", "7.125V", "7.25V", "7.375V",
+ "7.5V", "7.625V", "7.75V", "7.875V", "8V", "8.125V", "8.25V", "8.375V",
+ "8.5V", "8.625V", "8.75V", "8.875V", "9V", "9.125V", "9.25V", "9.375V",
+ "9.5V", "9.625V", "9.75V", "9.875V", "10V"
+};
+
+static const char * const max98927_speaker_source_text[] = {
+ "i2s", "reserved", "tone", "pdm"
+};
+
+static const char * const max98927_monomix_output_text[] = {
+ "ch_0", "ch_1", "ch_1_2_div"
+};
+
+static SOC_ENUM_SINGLE_DECL(max98927_boost_voltage,
+ MAX98927_R0040_BOOST_CTRL0, 0,
+ max98927_boost_voltage_text);
+
+static SOC_ENUM_SINGLE_DECL(max98927_spk_source,
+ MAX98927_R003B_SPK_SRC_SEL, 0,
+ max98927_speaker_source_text);
+
+static SOC_ENUM_SINGLE_DECL(max98927_monomix_output,
+ MAX98927_R0025_PCM_TO_SPK_MONOMIX_A,
+ MAX98927_PCM_TO_SPK_MONOMIX_CFG_SHIFT,
+ max98927_monomix_output_text);
+
+static const struct snd_kcontrol_new max98927_snd_controls[] = {
+ SOC_SINGLE_TLV("Speaker Volume", MAX98927_R003C_SPK_GAIN,
+ 0, 6, 0,
+ max98927_spk_tlv),
+ SOC_SINGLE_TLV("Digital Gain", MAX98927_R0036_AMP_VOL_CTRL,
+ 0, (1<<MAX98927_AMP_VOL_WIDTH)-1, 0,
+ max98927_digital_tlv),
+ SOC_SINGLE("Amp DSP Enable", MAX98927_R0052_BROWNOUT_EN,
+ MAX98927_BROWNOUT_DSP_SHIFT, 1, 0),
+ SOC_SINGLE("Ramp Switch", MAX98927_R0037_AMP_DSP_CFG,
+ MAX98927_AMP_DSP_CFG_RMP_SHIFT, 1, 0),
+ SOC_SINGLE("DRE EN", MAX98927_R0039_DRE_CTRL,
+ MAX98927_DRE_EN_SHIFT, 1, 0),
+ SOC_SINGLE("Amp Volume Location", MAX98927_R0036_AMP_VOL_CTRL,
+ MAX98927_AMP_VOL_SEL_SHIFT, 1, 0),
+ SOC_ENUM("Boost Output Voltage", max98927_boost_voltage),
+ SOC_ENUM("Speaker Source", max98927_spk_source),
+ SOC_ENUM("Monomix Output", max98927_monomix_output),
+};
+
+static const struct snd_soc_dapm_route max98927_audio_map[] = {
+ {"Amp Enable", NULL, "DAI_OUT"},
+ {"DAI Sel Mux", "Left", "Amp Enable"},
+ {"DAI Sel Mux", "Right", "Amp Enable"},
+ {"DAI Sel Mux", "LeftRight", "Amp Enable"},
+ {"BE_OUT", NULL, "DAI Sel Mux"},
+};
+
+static struct snd_soc_dai_driver max98927_dai[] = {
+ {
+ .name = "max98927-aif1",
+ .playback = {
+ .stream_name = "HiFi Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = MAX98927_RATES,
+ .formats = MAX98927_FORMATS,
+ },
+ .capture = {
+ .stream_name = "HiFi Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = MAX98927_RATES,
+ .formats = MAX98927_FORMATS,
+ },
+ .ops = &max98927_dai_ops,
+ }
+};
+
+static int max98927_probe(struct snd_soc_codec *codec)
+{
+ struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec);
+ int ret = 0, reg = 0;
+
+ max98927->codec = codec;
+ codec->control_data = max98927->regmap;
+ codec->cache_bypass = 1;
+
+ /* Software Reset */
+ regmap_write(max98927->regmap,
+ MAX98927_R0100_SOFT_RESET, MAX98927_SOFT_RESET);
+
+ /* Check Revision ID */
+ ret = regmap_read(max98927->regmap,
+ MAX98927_R01FF_REV_ID, ®);
+ if (ret < 0)
+ dev_err(codec->dev,
+ "Failed to read: 0x%02X\n", MAX98927_R01FF_REV_ID);
+ else
+ dev_info(codec->dev,
+ "MAX98927 revisionID: 0x%02X\n", reg);
+
+ /* IV default slot configuration */
+ regmap_write(max98927->regmap,
+ MAX98927_R001C_PCM_TX_HIZ_CTRL_A,
+ 0xFF);
+ regmap_write(max98927->regmap,
+ MAX98927_R001D_PCM_TX_HIZ_CTRL_B,
+ 0xFF);
+ regmap_write(max98927->regmap,
+ MAX98927_R0025_PCM_TO_SPK_MONOMIX_A,
+ 0x80);
+ regmap_write(max98927->regmap,
+ MAX98927_R0026_PCM_TO_SPK_MONOMIX_B,
+ 0x1);
+ /* Set inital volume (+13dB) */
+ regmap_write(max98927->regmap,
+ MAX98927_R0036_AMP_VOL_CTRL,
+ 0x38);
+ regmap_write(max98927->regmap,
+ MAX98927_R003C_SPK_GAIN,
+ 0x05);
+ /* Enable DC blocker */
+ regmap_write(max98927->regmap,
+ MAX98927_R0037_AMP_DSP_CFG,
+ 0x03);
+ /* Enable IMON VMON DC blocker */
+ regmap_write(max98927->regmap,
+ MAX98927_R003F_MEAS_DSP_CFG,
+ 0xF7);
+ /* Boost Output Voltage & Current limit */
+ regmap_write(max98927->regmap,
+ MAX98927_R0040_BOOST_CTRL0,
+ 0x1C);
+ regmap_write(max98927->regmap,
+ MAX98927_R0042_BOOST_CTRL1,
+ 0x3E);
+ /* Measurement ADC config */
+ regmap_write(max98927->regmap,
+ MAX98927_R0043_MEAS_ADC_CFG,
+ 0x04);
+ regmap_write(max98927->regmap,
+ MAX98927_R0044_MEAS_ADC_BASE_MSB,
+ 0x00);
+ regmap_write(max98927->regmap,
+ MAX98927_R0045_MEAS_ADC_BASE_LSB,
+ 0x24);
+ /* Brownout Level */
+ regmap_write(max98927->regmap,
+ MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1,
+ 0x06);
+ /* Envelope Tracking configuration */
+ regmap_write(max98927->regmap,
+ MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM,
+ 0x08);
+ regmap_write(max98927->regmap,
+ MAX98927_R0086_ENV_TRACK_CTRL,
+ 0x01);
+ regmap_write(max98927->regmap,
+ MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ,
+ 0x10);
+
+ /* voltage, current slot configuration */
+ regmap_write(max98927->regmap,
+ MAX98927_R001E_PCM_TX_CH_SRC_A,
+ (max98927->i_l_slot<<MAX98927_PCM_TX_CH_SRC_A_I_SHIFT|
+ max98927->v_l_slot)&0xFF);
+
+ if (max98927->v_l_slot < 8) {
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001C_PCM_TX_HIZ_CTRL_A,
+ 1 << max98927->v_l_slot, 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001A_PCM_TX_EN_A,
+ 1 << max98927->v_l_slot,
+ 1 << max98927->v_l_slot);
+ } else {
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001D_PCM_TX_HIZ_CTRL_B,
+ 1 << (max98927->v_l_slot - 8), 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001B_PCM_TX_EN_B,
+ 1 << (max98927->v_l_slot - 8),
+ 1 << (max98927->v_l_slot - 8));
+ }
+
+ if (max98927->i_l_slot < 8) {
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001C_PCM_TX_HIZ_CTRL_A,
+ 1 << max98927->i_l_slot, 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001A_PCM_TX_EN_A,
+ 1 << max98927->i_l_slot,
+ 1 << max98927->i_l_slot);
+ } else {
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001D_PCM_TX_HIZ_CTRL_B,
+ 1 << (max98927->i_l_slot - 8), 0);
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001B_PCM_TX_EN_B,
+ 1 << (max98927->i_l_slot - 8),
+ 1 << (max98927->i_l_slot - 8));
+ }
+
+ /* Set interleave mode */
+ if (max98927->interleave_mode)
+ regmap_update_bits(max98927->regmap,
+ MAX98927_R001F_PCM_TX_CH_SRC_B,
+ MAX98927_PCM_TX_CH_INTERLEAVE_MASK,
+ MAX98927_PCM_TX_CH_INTERLEAVE_MASK);
+ return ret;
+}
+
+static const struct snd_soc_codec_driver soc_codec_dev_max98927 = {
+ .probe = max98927_probe,
+ .component_driver = {
+ .controls = max98927_snd_controls,
+ .num_controls = ARRAY_SIZE(max98927_snd_controls),
+ .dapm_widgets = max98927_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(max98927_dapm_widgets),
+ .dapm_routes = max98927_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(max98927_audio_map),
+ },
+};
+
+static const struct regmap_config max98927_regmap = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = MAX98927_R01FF_REV_ID,
+ .reg_defaults = max98927_reg,
+ .num_reg_defaults = ARRAY_SIZE(max98927_reg),
+ .readable_reg = max98927_readable_register,
+ .volatile_reg = max98927_volatile_reg,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static void max98927_slot_config(struct i2c_client *i2c,
+ struct max98927_priv *max98927)
+{
+ int value;
+
+ if (!of_property_read_u32(i2c->dev.of_node,
+ "maxim,vmon-slot-no", &value))
+ max98927->v_l_slot = value & 0xF;
+ else
+ max98927->v_l_slot = 0;
+ if (!of_property_read_u32(i2c->dev.of_node,
+ "maxim,imon-slot-no", &value))
+ max98927->i_l_slot = value & 0xF;
+ else
+ max98927->i_l_slot = 1;
+}
+
+static int max98927_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+
+ int ret = 0, value;
+ struct max98927_priv *max98927 = NULL;
+
+ max98927 = devm_kzalloc(&i2c->dev,
+ sizeof(*max98927), GFP_KERNEL);
+
+ if (!max98927) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ i2c_set_clientdata(i2c, max98927);
+
+ /* update interleave mode info */
+ if (!of_property_read_u32(i2c->dev.of_node,
+ "maxim,interleave_mode", &value)) {
+ if (value > 0)
+ max98927->interleave_mode = 1;
+ else
+ max98927->interleave_mode = 0;
+ } else
+ max98927->interleave_mode = 0;
+
+ /* regmap initialization */
+ max98927->regmap
+ = devm_regmap_init_i2c(i2c, &max98927_regmap);
+ if (IS_ERR(max98927->regmap)) {
+ ret = PTR_ERR(max98927->regmap);
+ dev_err(&i2c->dev,
+ "Failed to allocate regmap: %d\n", ret);
+ goto err;
+ }
+
+ /* voltage/current slot configuration */
+ max98927_slot_config(i2c, max98927);
+
+ /* codec registeration */
+ ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_max98927,
+ max98927_dai, ARRAY_SIZE(max98927_dai));
+ if (ret < 0)
+ dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
+
+ return ret;
+
+err:
+ if (max98927)
+ devm_kfree(&i2c->dev, max98927);
+ return ret;
+}
+
+static int max98927_i2c_remove(struct i2c_client *client)
+{
+ snd_soc_unregister_codec(&client->dev);
+ return 0;
+}
+
+static const struct i2c_device_id max98927_i2c_id[] = {
+ { "max98927", 0},
+ { },
+};
+
+MODULE_DEVICE_TABLE(i2c, max98927_i2c_id);
+
+#if defined(CONFIG_OF)
+static const struct of_device_id max98927_of_match[] = {
+ { .compatible = "maxim,max98927", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max98927_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id max98927_acpi_match[] = {
+ { "MX98927", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, max98927_acpi_match);
+#endif
+
+static struct i2c_driver max98927_i2c_driver = {
+ .driver = {
+ .name = "max98927",
+ .of_match_table = of_match_ptr(max98927_of_match),
+ .acpi_match_table = ACPI_PTR(max98927_acpi_match),
+ .pm = NULL,
+ },
+ .probe = max98927_i2c_probe,
+ .remove = max98927_i2c_remove,
+ .id_table = max98927_i2c_id,
+};
+
+module_i2c_driver(max98927_i2c_driver)
+
+MODULE_DESCRIPTION("ALSA SoC MAX98927 driver");
+MODULE_AUTHOR("Ryan Lee <ryans.lee@maximintegrated.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/max98927.h b/sound/soc/codecs/max98927.h
new file mode 100755
index 0000000..e13e18a
--- /dev/null
+++ b/sound/soc/codecs/max98927.h
@@ -0,0 +1,267 @@
+/*
+ * max98927.h -- MAX98927 ALSA Soc Audio driver
+ *
+ * Copyright 2013-15 Maxim Integrated Products
+ * Author: Ryan Lee <ryans.lee@maximintegrated.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef _MAX98927_H
+#define _MAX98927_H
+
+/* Register Values */
+#define MAX98927_R0001_INT_RAW1 0x0001
+#define MAX98927_R0002_INT_RAW2 0x0002
+#define MAX98927_R0003_INT_RAW3 0x0003
+#define MAX98927_R0004_INT_STATE1 0x0004
+#define MAX98927_R0005_INT_STATE2 0x0005
+#define MAX98927_R0006_INT_STATE3 0x0006
+#define MAX98927_R0007_INT_FLAG1 0x0007
+#define MAX98927_R0008_INT_FLAG2 0x0008
+#define MAX98927_R0009_INT_FLAG3 0x0009
+#define MAX98927_R000A_INT_EN1 0x000A
+#define MAX98927_R000B_INT_EN2 0x000B
+#define MAX98927_R000C_INT_EN3 0x000C
+#define MAX98927_R000D_INT_FLAG_CLR1 0x000D
+#define MAX98927_R000E_INT_FLAG_CLR2 0x000E
+#define MAX98927_R000F_INT_FLAG_CLR3 0x000F
+#define MAX98927_R0010_IRQ_CTRL 0x0010
+#define MAX98927_R0011_CLK_MON 0x0011
+#define MAX98927_R0012_WDOG_CTRL 0x0012
+#define MAX98927_R0013_WDOG_RST 0x0013
+#define MAX98927_R0014_MEAS_ADC_THERM_WARN_THRESH 0x0014
+#define MAX98927_R0015_MEAS_ADC_THERM_SHDN_THRESH 0x0015
+#define MAX98927_R0016_MEAS_ADC_THERM_HYSTERESIS 0x0016
+#define MAX98927_R0017_PIN_CFG 0x0017
+#define MAX98927_R0018_PCM_RX_EN_A 0x0018
+#define MAX98927_R0019_PCM_RX_EN_B 0x0019
+#define MAX98927_R001A_PCM_TX_EN_A 0x001A
+#define MAX98927_R001B_PCM_TX_EN_B 0x001B
+#define MAX98927_R001C_PCM_TX_HIZ_CTRL_A 0x001C
+#define MAX98927_R001D_PCM_TX_HIZ_CTRL_B 0x001D
+#define MAX98927_R001E_PCM_TX_CH_SRC_A 0x001E
+#define MAX98927_R001F_PCM_TX_CH_SRC_B 0x001F
+#define MAX98927_R0020_PCM_MODE_CFG 0x0020
+#define MAX98927_R0021_PCM_MASTER_MODE 0x0021
+#define MAX98927_R0022_PCM_CLK_SETUP 0x0022
+#define MAX98927_R0023_PCM_SR_SETUP1 0x0023
+#define MAX98927_R0024_PCM_SR_SETUP2 0x0024
+#define MAX98927_R0025_PCM_TO_SPK_MONOMIX_A 0x0025
+#define MAX98927_R0026_PCM_TO_SPK_MONOMIX_B 0x0026
+#define MAX98927_R0027_ICC_RX_EN_A 0x0027
+#define MAX98927_R0028_ICC_RX_EN_B 0x0028
+#define MAX98927_R002B_ICC_TX_EN_A 0x002B
+#define MAX98927_R002C_ICC_TX_EN_B 0x002C
+#define MAX98927_R002E_ICC_HIZ_MANUAL_MODE 0x002E
+#define MAX98927_R002F_ICC_TX_HIZ_EN_A 0x002F
+#define MAX98927_R0030_ICC_TX_HIZ_EN_B 0x0030
+#define MAX98927_R0031_ICC_LNK_EN 0x0031
+#define MAX98927_R0032_PDM_TX_EN 0x0032
+#define MAX98927_R0033_PDM_TX_HIZ_CTRL 0x0033
+#define MAX98927_R0034_PDM_TX_CTRL 0x0034
+#define MAX98927_R0035_PDM_RX_CTRL 0x0035
+#define MAX98927_R0036_AMP_VOL_CTRL 0x0036
+#define MAX98927_R0037_AMP_DSP_CFG 0x0037
+#define MAX98927_R0038_TONE_GEN_DC_CFG 0x0038
+#define MAX98927_R0039_DRE_CTRL 0x0039
+#define MAX98927_R003A_AMP_EN 0x003A
+#define MAX98927_R003B_SPK_SRC_SEL 0x003B
+#define MAX98927_R003C_SPK_GAIN 0x003C
+#define MAX98927_R003D_SSM_CFG 0x003D
+#define MAX98927_R003E_MEAS_EN 0x003E
+#define MAX98927_R003F_MEAS_DSP_CFG 0x003F
+#define MAX98927_R0040_BOOST_CTRL0 0x0040
+#define MAX98927_R0041_BOOST_CTRL3 0x0041
+#define MAX98927_R0042_BOOST_CTRL1 0x0042
+#define MAX98927_R0043_MEAS_ADC_CFG 0x0043
+#define MAX98927_R0044_MEAS_ADC_BASE_MSB 0x0044
+#define MAX98927_R0045_MEAS_ADC_BASE_LSB 0x0045
+#define MAX98927_R0046_ADC_CH0_DIVIDE 0x0046
+#define MAX98927_R0047_ADC_CH1_DIVIDE 0x0047
+#define MAX98927_R0048_ADC_CH2_DIVIDE 0x0048
+#define MAX98927_R0049_ADC_CH0_FILT_CFG 0x0049
+#define MAX98927_R004A_ADC_CH1_FILT_CFG 0x004A
+#define MAX98927_R004B_ADC_CH2_FILT_CFG 0x004B
+#define MAX98927_R004C_MEAS_ADC_CH0_READ 0x004C
+#define MAX98927_R004D_MEAS_ADC_CH1_READ 0x004D
+#define MAX98927_R004E_MEAS_ADC_CH2_READ 0x004E
+#define MAX98927_R0051_BROWNOUT_STATUS 0x0051
+#define MAX98927_R0052_BROWNOUT_EN 0x0052
+#define MAX98927_R0053_BROWNOUT_INFINITE_HOLD 0x0053
+#define MAX98927_R0054_BROWNOUT_INFINITE_HOLD_CLR 0x0054
+#define MAX98927_R0055_BROWNOUT_LVL_HOLD 0x0055
+#define MAX98927_R005A_BROWNOUT_LVL1_THRESH 0x005A
+#define MAX98927_R005B_BROWNOUT_LVL2_THRESH 0x005B
+#define MAX98927_R005C_BROWNOUT_LVL3_THRESH 0x005C
+#define MAX98927_R005D_BROWNOUT_LVL4_THRESH 0x005D
+#define MAX98927_R005E_BROWNOUT_THRESH_HYSTERYSIS 0x005E
+#define MAX98927_R005F_BROWNOUT_AMP_LIMITER_ATK_REL 0x005F
+#define MAX98927_R0060_BROWNOUT_AMP_GAIN_ATK_REL 0x0060
+#define MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE 0x0061
+#define MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT 0x0072
+#define MAX98927_R0073_BROWNOUT_LVL1_AMP1_CTRL1 0x0073
+#define MAX98927_R0074_BROWNOUT_LVL1_AMP1_CTRL2 0x0074
+#define MAX98927_R0075_BROWNOUT_LVL1_AMP1_CTRL3 0x0075
+#define MAX98927_R0076_BROWNOUT_LVL2_CUR_LIMIT 0x0076
+#define MAX98927_R0077_BROWNOUT_LVL2_AMP1_CTRL1 0x0077
+#define MAX98927_R0078_BROWNOUT_LVL2_AMP1_CTRL2 0x0078
+#define MAX98927_R0079_BROWNOUT_LVL2_AMP1_CTRL3 0x0079
+#define MAX98927_R007A_BROWNOUT_LVL3_CUR_LIMIT 0x007A
+#define MAX98927_R007B_BROWNOUT_LVL3_AMP1_CTRL1 0x007B
+#define MAX98927_R007C_BROWNOUT_LVL3_AMP1_CTRL2 0x007C
+#define MAX98927_R007D_BROWNOUT_LVL3_AMP1_CTRL3 0x007D
+#define MAX98927_R007E_BROWNOUT_LVL4_CUR_LIMIT 0x007E
+#define MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1 0x007F
+#define MAX98927_R0080_BROWNOUT_LVL4_AMP1_CTRL2 0x0080
+#define MAX98927_R0081_BROWNOUT_LVL4_AMP1_CTRL3 0x0081
+#define MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM 0x0082
+#define MAX98927_R0083_ENV_TRACK_BOOST_VOUT_DELAY 0x0083
+#define MAX98927_R0084_ENV_TRACK_REL_RATE 0x0084
+#define MAX98927_R0085_ENV_TRACK_HOLD_RATE 0x0085
+#define MAX98927_R0086_ENV_TRACK_CTRL 0x0086
+#define MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ 0x0087
+#define MAX98927_R00FF_GLOBAL_SHDN 0x00FF
+#define MAX98927_R0100_SOFT_RESET 0x0100
+#define MAX98927_R01FF_REV_ID 0x01FF
+
+/* MAX98927_R0018_PCM_RX_EN_A */
+#define MAX98927_PCM_RX_CH0_EN (0x1 << 0)
+#define MAX98927_PCM_RX_CH1_EN (0x1 << 1)
+#define MAX98927_PCM_RX_CH2_EN (0x1 << 2)
+#define MAX98927_PCM_RX_CH3_EN (0x1 << 3)
+#define MAX98927_PCM_RX_CH4_EN (0x1 << 4)
+#define MAX98927_PCM_RX_CH5_EN (0x1 << 5)
+#define MAX98927_PCM_RX_CH6_EN (0x1 << 6)
+#define MAX98927_PCM_RX_CH7_EN (0x1 << 7)
+
+/* MAX98927_R001A_PCM_TX_EN_A */
+#define MAX98927_PCM_TX_CH0_EN (0x1 << 0)
+#define MAX98927_PCM_TX_CH1_EN (0x1 << 1)
+#define MAX98927_PCM_TX_CH2_EN (0x1 << 2)
+#define MAX98927_PCM_TX_CH3_EN (0x1 << 3)
+#define MAX98927_PCM_TX_CH4_EN (0x1 << 4)
+#define MAX98927_PCM_TX_CH5_EN (0x1 << 5)
+#define MAX98927_PCM_TX_CH6_EN (0x1 << 6)
+#define MAX98927_PCM_TX_CH7_EN (0x1 << 7)
+
+/* MAX98927_R001E_PCM_TX_CH_SRC_A */
+#define MAX98927_PCM_TX_CH_SRC_A_V_SHIFT (0)
+#define MAX98927_PCM_TX_CH_SRC_A_I_SHIFT (4)
+
+/* MAX98927_R001F_PCM_TX_CH_SRC_B */
+#define MAX98927_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 5)
+
+/* MAX98927_R0020_PCM_MODE_CFG */
+#define MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2)
+#define MAX98927_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3)
+
+#define MAX98927_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6)
+#define MAX98927_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6)
+#define MAX98927_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6)
+#define MAX98927_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6)
+
+/* MAX98927_R0021_PCM_MASTER_MODE */
+#define MAX98927_PCM_MASTER_MODE_MASK (0x3 << 0)
+#define MAX98927_PCM_MASTER_MODE_SLAVE (0x0 << 0)
+#define MAX98927_PCM_MASTER_MODE_MASTER (0x3 << 0)
+#define MAX98927_PCM_MASTER_MODE_HYBRID (0x1 << 0)
+
+#define MAX98927_PCM_MASTER_MODE_MCLK_MASK (0xF << 2)
+#define MAX98927_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2)
+
+/* MAX98927_R0022_PCM_CLK_SETUP */
+#define MAX98927_PCM_CLK_SETUP_BSEL_MASK (0xF << 0)
+
+/* MAX98927_R0023_PCM_SR_SETUP1 */
+#define MAX98927_PCM_SR_SET1_SR_MASK (0xF << 0)
+
+#define MAX98927_PCM_SR_SET1_SR_8000 (0x0 << 0)
+#define MAX98927_PCM_SR_SET1_SR_11025 (0x1 << 0)
+#define MAX98927_PCM_SR_SET1_SR_12000 (0x2 << 0)
+#define MAX98927_PCM_SR_SET1_SR_16000 (0x3 << 0)
+#define MAX98927_PCM_SR_SET1_SR_22050 (0x4 << 0)
+#define MAX98927_PCM_SR_SET1_SR_24000 (0x5 << 0)
+#define MAX98927_PCM_SR_SET1_SR_32000 (0x6 << 0)
+#define MAX98927_PCM_SR_SET1_SR_44100 (0x7 << 0)
+#define MAX98927_PCM_SR_SET1_SR_48000 (0x8 << 0)
+
+/* MAX98927_R0024_PCM_SR_SETUP2 */
+#define MAX98927_PCM_SR_SET2_SR_MASK (0xF << 4)
+#define MAX98927_PCM_SR_SET2_SR_SHIFT (4)
+#define MAX98927_PCM_SR_SET2_IVADC_SR_MASK (0xf << 0)
+
+/* MAX98927_R0025_PCM_TO_SPK_MONOMIX_A */
+#define MAX98927_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6)
+#define MAX98927_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6)
+
+/* MAX98927_R0036_AMP_VOL_CTRL */
+#define MAX98927_AMP_VOL_SEL (0x1 << 7)
+#define MAX98927_AMP_VOL_SEL_WIDTH (1)
+#define MAX98927_AMP_VOL_SEL_SHIFT (7)
+#define MAX98927_AMP_VOL_MASK (0x7f << 0)
+#define MAX98927_AMP_VOL_WIDTH (7)
+#define MAX98927_AMP_VOL_SHIFT (0)
+
+/* MAX98927_R0037_AMP_DSP_CFG */
+#define MAX98927_AMP_DSP_CFG_DCBLK_EN (0x1 << 0)
+#define MAX98927_AMP_DSP_CFG_DITH_EN (0x1 << 1)
+#define MAX98927_AMP_DSP_CFG_RMP_BYPASS (0x1 << 4)
+#define MAX98927_AMP_DSP_CFG_DAC_INV (0x1 << 5)
+#define MAX98927_AMP_DSP_CFG_RMP_SHIFT (4)
+
+/* MAX98927_R0039_DRE_CTRL */
+#define MAX98927_DRE_CTRL_DRE_EN (0x1 << 0)
+#define MAX98927_DRE_EN_SHIFT 0x1
+
+/* MAX98927_R003A_AMP_EN */
+#define MAX98927_AMP_EN_MASK (0x1 << 0)
+
+/* MAX98927_R003B_SPK_SRC_SEL */
+#define MAX98927_SPK_SRC_MASK (0x3 << 0)
+
+/* MAX98927_R003C_SPK_GAIN */
+#define MAX98927_SPK_PCM_GAIN_MASK (0x7 << 0)
+#define MAX98927_SPK_PDM_GAIN_MASK (0x7 << 4)
+#define MAX98927_SPK_GAIN_WIDTH (3)
+
+/* MAX98927_R003E_MEAS_EN */
+#define MAX98927_MEAS_V_EN (0x1 << 0)
+#define MAX98927_MEAS_I_EN (0x1 << 1)
+
+/* MAX98927_R0040_BOOST_CTRL0 */
+#define MAX98927_BOOST_CTRL0_VOUT_MASK (0x1f << 0)
+#define MAX98927_BOOST_CTRL0_PVDD_MASK (0x1 << 7)
+#define MAX98927_BOOST_CTRL0_PVDD_EN_SHIFT (7)
+
+/* MAX98927_R0052_BROWNOUT_EN */
+#define MAX98927_BROWNOUT_BDE_EN (0x1 << 0)
+#define MAX98927_BROWNOUT_AMP_EN (0x1 << 1)
+#define MAX98927_BROWNOUT_DSP_EN (0x1 << 2)
+#define MAX98927_BROWNOUT_DSP_SHIFT (2)
+
+/* MAX98927_R0100_SOFT_RESET */
+#define MAX98927_SOFT_RESET (0x1 << 0)
+
+/* MAX98927_R00FF_GLOBAL_SHDN */
+#define MAX98927_GLOBAL_EN_MASK (0x1 << 0)
+
+struct max98927_priv {
+ struct regmap *regmap;
+ struct snd_soc_codec *codec;
+ struct max98927_pdata *pdata;
+ unsigned int spk_gain;
+ unsigned int sysclk;
+ unsigned int v_l_slot;
+ unsigned int i_l_slot;
+ bool interleave_mode;
+ unsigned int ch_size;
+ unsigned int rate;
+ unsigned int iface;
+ unsigned int master;
+ unsigned int digital_gain;
+};
+#endif
--
2.7.4
^ permalink raw reply related
* Re: [PATCH 1/2] leds: Add driver for Qualcomm LPG
From: Bjorn Andersson @ 2017-03-27 4:48 UTC (permalink / raw)
To: Pavel Machek
Cc: Richard Purdie, Jacek Anaszewski,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-leds-u79uwXL29TY76Z2rM5mHXA,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <20170323203749.GB8563@amd>
On Thu 23 Mar 13:37 PDT 2017, Pavel Machek wrote:
> Hi!
>
> > The Light Pulse Generator (LPG) is a PWM-block found in a wide range of
> > PMICs from Qualcomm. It can operate on fixed parameters or based on a
> > lookup-table, altering the duty cycle over time - which provides the
> > means for e.g. hardware assisted transitions of LED brightness.
>
> Ok, this is not first hardware that supports something like this. We
> have similar hardware that can do blinking on Nokia N900 -- please
> take a look at leds-lp55*.c
>
I have not worked with the LP55xx chips before, they look quite capable!
> And it would be really good to provide hardware abstraction. We really
> don't want to have different userspace for LPG and for N900 and for
> ...
>
> Which probably means finding subset that makes sense for everyone.
>
While I share your concern of userspace differences I'm not sure how to
expose the advanced features of the LP55xx series and the LPG's limited
pattern-controlled PWM.
> Hmm. What is difference between "ping_pong" and "reverse"? And do we
> really want it? That seems little .. too specialized.
>
Writing the appropriate bit in RAMP_CONTROL_REG of the LUT block
qcom_lpg_lut_sync() resets the ramp-walker; ping-pong causes the
ramp-walker to make one round-trip run over the pattern, while reverse
means that the ramp-walker should start from the hi-index.
I.e. with the pattern [1,2,3] we get:
ping-pong: [1,2,3,2,1]
reverse: [3,2,1]
ping-pong and reverse: [3,2,1,2,3]
> How are different channels on RGB LED synchronized?
>
You can reset multiple ramp-generators simultaneously, which would cause
the channels to be synchronized. I have not implemented this though.
> > +What: /sys/class/leds/<led>/pattern
> > +Date: March 2017
> > +KernelVersion: 4.12
> > +Contact: Bjorn Andersson <bjorn.andersson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > +Description:
> > + Comma-separated list of duty cycle values to output from
> > + the ramp generator. Values should be in the range of 0
> > + to 511.
>
> We normally do "space separated" in sysfs.
>
Okay, I'm fine with that.
> Can your engine do "smooth transitions"? For example if you want to
> slowly turn on the LED on, can you do something more clever than
>
> 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
> 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
> ...
> 496, 497, 498, 499, 500, 501, 502, 503, 504, 505, 506, 507, 508, 509,
> 510, 511
>
There's nothing beyond "run the pattern", so this is exactly what you
would have to do if you need a perfectly smooth transition.
> ? What is the maximum length of the pattern?
>
It differs between the various PMICs implementing this. I've seen cases
of 24 slots and 64 slots.
> Could we do patterns in form of "delay brightness delay brightness"
> .... ?
>
The ramp-walker is configured to tick with a fixed clock (in
milliseconds) and the PWM will be configured with the duty-cycle of the
current element of the ramp.
So you can do this, given that all your "delay" is the same fixed delay,
which is max 511 milliseconds.
> > +static enum led_brightness lpg_brightnes_get(struct led_classdev *cdev)
> > +{
> > + struct lpg *lpg = container_of(cdev, struct lpg, cdev);
> > + unsigned long max = (1 << lpg->pwm_size) - 1;
> > +
> > + if (!lpg->enabled)
> > + return LED_OFF;
> > +
> > + return lpg->pwm_value * cdev->max_brightness / max;
> > +}
>
> Does this return something reasonable when pattern is running?
>
No, I'll fix that. I treat brightness as a boolean if a pattern is
provided, but I'm concerned about modifying max_brightness to reflect
this.
As you can see from these answers, the hardware is quite limited in
comparison to the LP55xx series. It would make some sense to feed e.g. a
mathematical formula to the kernel and have the driver map that to
patterns for the LPG or program code in the case of LP55xx.
But this would add quite a bit of complexity and with hardware as
limited as the 24-slot LPG we likely need that direct control of the
patterns.
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* RE: [PATCH 1/2 v2] dt-bindings: qoriq-clock: Add coreclk
From: Andy Tang @ 2017-03-27 3:39 UTC (permalink / raw)
To: mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org
Cc: sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Scott Wood
In-Reply-To: <1489977443-33582-1-git-send-email-andy.tang-3arQi8VN3Tc@public.gmane.org>
PING!
Regards,
Yuantian
> -----Original Message-----
> From: Yuantian Tang [mailto:andy.tang-3arQi8VN3Tc@public.gmane.org]
> Sent: Monday, March 20, 2017 10:37 AM
> To: mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org
> Cc: sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org; robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org; mark.rutland-5wv7dgnIgG8@public.gmane.org;
> linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-
> kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org; Scott Wood;
> Andy Tang
> Subject: [PATCH 1/2 v2] dt-bindings: qoriq-clock: Add coreclk
>
> From: Scott Wood <oss-fOR+EgIDQEHk1uMJSBkQmQ@public.gmane.org>
>
> ls1012a has separate input root clocks for core PLLs versus the platform PLL,
> with the latter described as sysclk in the hw docs.
> Update the qoriq-clock binding to allow a second input clock, named
> "coreclk". If present, this clock will be used for the core PLLs.
>
> Signed-off-by: Scott Wood <oss-fOR+EgIDQEHk1uMJSBkQmQ@public.gmane.org>
> Signed-off-by: Tang Yuantian <andy.tang-3arQi8VN3Tc@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
> v2:
> -- change the author to Scott
> Documentation/devicetree/bindings/clock/qoriq-clock.txt | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> index aa3526f..119cafd 100644
> --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> @@ -56,6 +56,11 @@ Optional properties:
> - clocks: If clock-frequency is not specified, sysclk may be provided
> as an input clock. Either clock-frequency or clocks must be
> provided.
> + A second input clock, called "coreclk", may be provided if
> + core PLLs are based on a different input clock from the
> + platform PLL.
> +- clock-names: Required if a coreclk is present. Valid names are
> + "sysclk" and "coreclk".
>
> 2. Clock Provider
>
> @@ -72,6 +77,7 @@ second cell is the clock index for the specified type.
> 2 hwaccel index (n in CLKCGnHWACSR)
> 3 fman 0 for fm1, 1 for fm2
> 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4
> + 5 coreclk must be 0
>
> 3. Example
>
> --
> 2.1.0.27.g96db324
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCHv3] power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
From: Tony Lindgren @ 2017-03-27 3:25 UTC (permalink / raw)
To: Sebastian Reichel
Cc: linux-pm-u79uwXL29TY76Z2rM5mHXA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Marcel Partap, Michael Scott
The custom CPCAP PMIC used on Motorola phones such as Droid 4 has a
USB battery charger. It can optionally also have a companion chip that
is used for wireless charging.
The charger on CPCAP also can feed VBUS for the USB host mode. This
can be handled by the existing kernel phy_companion interface.
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Marcel Partap <mpartap-hi6Y0CQ0nG0@public.gmane.org>
Cc: Michael Scott <michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
Changes since v2:
- Update binding based on comments by Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
- Drop "motorola,cpcap-charger" compatible for now as this seems specific
to the motorola-mapphone
- Update Kconfig for "depends on IIO" and "default MFD_CPCAP"
Changes since v1:
- Fix scaling of IIO values as pointed out by Sebastian Reichel
<sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
- Use iio_read_channel_processed() instead of iio_read_channel_scaled()
as changed in the v2 of the ADC driver
- Add GPL v2 license header
---
.../bindings/power/supply/cpcap-charger.txt | 38 ++
drivers/power/supply/Kconfig | 8 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/cpcap-charger.c | 681 +++++++++++++++++++++
4 files changed, 728 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
create mode 100644 drivers/power/supply/cpcap-charger.c
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
new file mode 100644
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
@@ -0,0 +1,38 @@
+Motorola CPCAP PMIC battery charger binding
+
+Required properties:
+- compatible: Shall be "motorola,cpcap-charger" or
+ "motorola,mapphone-cpcap-charger"
+- interrupts: Interrupt specifier for each name in interrupt-names
+- interrupt-names: Should contain the following entries:
+ "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+ "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"
+- io-channels: IIO ADC channel specifier for each name in io-channel-names
+- io-channel-names: Should contain the following entries:
+ "battdetb", "battp", "vbus", "chg_isense", "batti"
+
+Optional properties:
+- mode-gpios: Optionally CPCAP charger can have a companion wireless
+ charge controller that is controlled with two GPIOs
+ that are active low.
+
+Example:
+
+cpcap_charger: charger {
+ compatible = "motorola,mapphone-cpcap-charger";
+ interrupts-extended = <
+ &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+ &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+ >;
+ interrupt-names =
+ "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+ "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+ mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+ &gpio3 23 GPIO_ACTIVE_LOW>;
+ io-channels = <&cpcap_adc 0 &cpcap_adc 1
+ &cpcap_adc 2 &cpcap_adc 5
+ &cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "vbus", "chg_isense",
+ "batti";
+};
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -317,6 +317,14 @@ config BATTERY_RX51
Say Y here to enable support for battery information on Nokia
RX-51, also known as N900 tablet.
+config CHARGER_CPCAP
+ tristate "CPCAP PMIC Charger Driver"
+ depends on MFD_CPCAP && IIO
+ default MFD_CPCAP
+ help
+ Say Y to enable support for CPCAP PMIC charger driver for Motorola
+ mobile devices such as Droid 4.
+
config CHARGER_ISP1704
tristate "ISP1704 USB Charger Detection"
depends on USB_PHY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
+obj-$(CONFIG_CHARGER_CPCAP) += cpcap-charger.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
new file mode 100644
--- /dev/null
+++ b/drivers/power/supply/cpcap-charger.c
@@ -0,0 +1,681 @@
+/*
+ * Motorola CPCAP PMIC battery charger driver
+ *
+ * Copyright (C) 2017 Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
+ *
+ * Rewritten for Linux power framework with some parts based on
+ * on earlier driver found in the Motorola Linux kernel:
+ *
+ * Copyright (C) 2009-2010 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/atomic.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/usb/otg.h>
+#include <linux/iio/consumer.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/* CPCAP_REG_CRM register bits */
+#define CPCAP_REG_CRM_UNUSED_641_15 BIT(15) /* 641 = register number */
+#define CPCAP_REG_CRM_UNUSED_641_14 BIT(14) /* 641 = register number */
+#define CPCAP_REG_CRM_CHRG_LED_EN BIT(13)
+#define CPCAP_REG_CRM_RVRSMODE BIT(12)
+#define CPCAP_REG_CRM_ICHRG_TR1 BIT(11)
+#define CPCAP_REG_CRM_ICHRG_TR0 BIT(10)
+#define CPCAP_REG_CRM_FET_OVRD BIT(9)
+#define CPCAP_REG_CRM_FET_CTRL BIT(8)
+#define CPCAP_REG_CRM_VCHRG3 BIT(7)
+#define CPCAP_REG_CRM_VCHRG2 BIT(6)
+#define CPCAP_REG_CRM_VCHRG1 BIT(5)
+#define CPCAP_REG_CRM_VCHRG0 BIT(4)
+#define CPCAP_REG_CRM_ICHRG3 BIT(3)
+#define CPCAP_REG_CRM_ICHRG2 BIT(2)
+#define CPCAP_REG_CRM_ICHRG1 BIT(1)
+#define CPCAP_REG_CRM_ICHRG0 BIT(0)
+
+/* CPCAP_REG_CRM trickle charge voltages */
+#define CPCAP_REG_CRM_TR(val) (((val) & 0x3) << 10)
+#define CPCAP_REG_CRM_TR_0A00 CPCAP_REG_CRM_TR(0x0)
+#define CPCAP_REG_CRM_TR_0A24 CPCAP_REG_CRM_TR(0x1)
+#define CPCAP_REG_CRM_TR_0A48 CPCAP_REG_CRM_TR(0x2)
+#define CPCAP_REG_CRM_TR_0A72 CPCAP_REG_CRM_TR(0x4)
+
+/* CPCAP_REG_CRM charge voltages */
+#define CPCAP_REG_CRM_VCHRG(val) (((val) & 0xf) << 4)
+#define CPCAP_REG_CRM_VCHRG_3V80 CPCAP_REG_CRM_VCHRG(0x0)
+#define CPCAP_REG_CRM_VCHRG_4V10 CPCAP_REG_CRM_VCHRG(0x1)
+#define CPCAP_REG_CRM_VCHRG_4V15 CPCAP_REG_CRM_VCHRG(0x2)
+#define CPCAP_REG_CRM_VCHRG_4V20 CPCAP_REG_CRM_VCHRG(0x3)
+#define CPCAP_REG_CRM_VCHRG_4V22 CPCAP_REG_CRM_VCHRG(0x4)
+#define CPCAP_REG_CRM_VCHRG_4V24 CPCAP_REG_CRM_VCHRG(0x5)
+#define CPCAP_REG_CRM_VCHRG_4V26 CPCAP_REG_CRM_VCHRG(0x6)
+#define CPCAP_REG_CRM_VCHRG_4V28 CPCAP_REG_CRM_VCHRG(0x7)
+#define CPCAP_REG_CRM_VCHRG_4V30 CPCAP_REG_CRM_VCHRG(0x8)
+#define CPCAP_REG_CRM_VCHRG_4V32 CPCAP_REG_CRM_VCHRG(0x9)
+#define CPCAP_REG_CRM_VCHRG_4V34 CPCAP_REG_CRM_VCHRG(0xa)
+#define CPCAP_REG_CRM_VCHRG_4V36 CPCAP_REG_CRM_VCHRG(0xb)
+#define CPCAP_REG_CRM_VCHRG_4V38 CPCAP_REG_CRM_VCHRG(0xc)
+#define CPCAP_REG_CRM_VCHRG_4V40 CPCAP_REG_CRM_VCHRG(0xd)
+#define CPCAP_REG_CRM_VCHRG_4V42 CPCAP_REG_CRM_VCHRG(0xe)
+#define CPCAP_REG_CRM_VCHRG_4V44 CPCAP_REG_CRM_VCHRG(0xf)
+
+/* CPCAP_REG_CRM charge currents */
+#define CPCAP_REG_CRM_ICHRG(val) (((val) & 0xf) << 0)
+#define CPCAP_REG_CRM_ICHRG_0A000 CPCAP_REG_CRM_ICHRG(0x0)
+#define CPCAP_REG_CRM_ICHRG_0A070 CPCAP_REG_CRM_ICHRG(0x1)
+#define CPCAP_REG_CRM_ICHRG_0A176 CPCAP_REG_CRM_ICHRG(0x2)
+#define CPCAP_REG_CRM_ICHRG_0A264 CPCAP_REG_CRM_ICHRG(0x3)
+#define CPCAP_REG_CRM_ICHRG_0A352 CPCAP_REG_CRM_ICHRG(0x4)
+#define CPCAP_REG_CRM_ICHRG_0A440 CPCAP_REG_CRM_ICHRG(0x5)
+#define CPCAP_REG_CRM_ICHRG_0A528 CPCAP_REG_CRM_ICHRG(0x6)
+#define CPCAP_REG_CRM_ICHRG_0A616 CPCAP_REG_CRM_ICHRG(0x7)
+#define CPCAP_REG_CRM_ICHRG_0A704 CPCAP_REG_CRM_ICHRG(0x8)
+#define CPCAP_REG_CRM_ICHRG_0A792 CPCAP_REG_CRM_ICHRG(0x9)
+#define CPCAP_REG_CRM_ICHRG_0A880 CPCAP_REG_CRM_ICHRG(0xa)
+#define CPCAP_REG_CRM_ICHRG_0A968 CPCAP_REG_CRM_ICHRG(0xb)
+#define CPCAP_REG_CRM_ICHRG_1A056 CPCAP_REG_CRM_ICHRG(0xc)
+#define CPCAP_REG_CRM_ICHRG_1A144 CPCAP_REG_CRM_ICHRG(0xd)
+#define CPCAP_REG_CRM_ICHRG_1A584 CPCAP_REG_CRM_ICHRG(0xe)
+#define CPCAP_REG_CRM_ICHRG_NO_LIMIT CPCAP_REG_CRM_ICHRG(0xf)
+
+enum {
+ CPCAP_CHARGER_IIO_BATTDET,
+ CPCAP_CHARGER_IIO_VOLTAGE,
+ CPCAP_CHARGER_IIO_VBUS,
+ CPCAP_CHARGER_IIO_CHRG_CURRENT,
+ CPCAP_CHARGER_IIO_BATT_CURRENT,
+ CPCAP_CHARGER_IIO_NR,
+};
+
+struct cpcap_charger_ddata {
+ struct device *dev;
+ struct regmap *reg;
+ struct list_head irq_list;
+ struct delayed_work detect_work;
+ struct delayed_work vbus_work;
+ struct gpio_desc *gpio[2]; /* gpio_reven0 & 1 */
+
+ struct iio_channel *channels[CPCAP_CHARGER_IIO_NR];
+
+ struct power_supply *usb;
+
+ struct phy_companion comparator; /* For USB VBUS */
+ bool vbus_enabled;
+ atomic_t active;
+
+ int status;
+};
+
+struct cpcap_interrupt_desc {
+ int irq;
+ struct list_head node;
+ const char *name;
+};
+
+struct cpcap_charger_ints_state {
+ bool chrg_det;
+ bool rvrs_chrg;
+ bool vbusov;
+
+ bool chrg_se1b;
+ bool rvrs_mode;
+ bool chrgcurr1;
+ bool vbusvld;
+
+ bool battdetb;
+};
+
+static enum power_supply_property cpcap_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static bool cpcap_charger_battery_found(struct cpcap_charger_ddata *ddata)
+{
+ struct iio_channel *channel;
+ int error, value;
+
+ channel = ddata->channels[CPCAP_CHARGER_IIO_BATTDET];
+ error = iio_read_channel_raw(channel, &value);
+ if (error < 0) {
+ dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+ return false;
+ }
+
+ return value == 1;
+}
+
+static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata)
+{
+ struct iio_channel *channel;
+ int error, value = 0;
+
+ channel = ddata->channels[CPCAP_CHARGER_IIO_VOLTAGE];
+ error = iio_read_channel_processed(channel, &value);
+ if (error < 0) {
+ dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+ return 0;
+ }
+
+ return value;
+}
+
+static int cpcap_charger_get_charge_current(struct cpcap_charger_ddata *ddata)
+{
+ struct iio_channel *channel;
+ int error, value = 0;
+
+ channel = ddata->channels[CPCAP_CHARGER_IIO_CHRG_CURRENT];
+ error = iio_read_channel_processed(channel, &value);
+ if (error < 0) {
+ dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+ return 0;
+ }
+
+ return value;
+}
+
+static int cpcap_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = ddata->status;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
+ val->intval = cpcap_charger_get_charge_voltage(ddata) *
+ 1000;
+ else
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
+ val->intval = cpcap_charger_get_charge_current(ddata) *
+ 1000;
+ else
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = ddata->status == POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void cpcap_charger_set_cable_path(struct cpcap_charger_ddata *ddata,
+ bool enabled)
+{
+ if (!ddata->gpio[0])
+ return;
+
+ gpiod_set_value(ddata->gpio[0], enabled);
+}
+
+static void cpcap_charger_set_inductive_path(struct cpcap_charger_ddata *ddata,
+ bool enabled)
+{
+ if (!ddata->gpio[1])
+ return;
+
+ gpiod_set_value(ddata->gpio[1], enabled);
+}
+
+static int cpcap_charger_set_state(struct cpcap_charger_ddata *ddata,
+ int max_voltage, int charge_current,
+ int trickle_current)
+{
+ bool enable;
+ int error;
+
+ enable = max_voltage && (charge_current || trickle_current);
+ dev_dbg(ddata->dev, "%s enable: %i\n", __func__, enable);
+
+ if (!enable) {
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+ 0x3fff,
+ CPCAP_REG_CRM_FET_OVRD |
+ CPCAP_REG_CRM_FET_CTRL);
+ if (error) {
+ ddata->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ goto out_err;
+ }
+
+ ddata->status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ return 0;
+ }
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff,
+ CPCAP_REG_CRM_CHRG_LED_EN |
+ trickle_current |
+ CPCAP_REG_CRM_FET_OVRD |
+ CPCAP_REG_CRM_FET_CTRL |
+ max_voltage |
+ charge_current);
+ if (error) {
+ ddata->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ goto out_err;
+ }
+
+ ddata->status = POWER_SUPPLY_STATUS_CHARGING;
+
+ return 0;
+
+out_err:
+ dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+ return error;
+}
+
+static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata)
+{
+ int error, value = 0;
+ struct iio_channel *channel =
+ ddata->channels[CPCAP_CHARGER_IIO_VBUS];
+
+ error = iio_read_channel_processed(channel, &value);
+ if (error >= 0)
+ return value > 3900 ? true : false;
+
+ dev_err(ddata->dev, "error reading VBUS: %i\n", error);
+
+ return false;
+}
+
+/* VBUS control functions for the USB PHY companion */
+
+static void cpcap_charger_vbus_work(struct work_struct *work)
+{
+ struct cpcap_charger_ddata *ddata;
+ bool vbus = false;
+ int error;
+
+ ddata = container_of(work, struct cpcap_charger_ddata,
+ vbus_work.work);
+
+ if (ddata->vbus_enabled) {
+ vbus = cpcap_charger_vbus_valid(ddata);
+ if (vbus) {
+ dev_info(ddata->dev, "VBUS already provided\n");
+
+ return;
+ }
+
+ cpcap_charger_set_cable_path(ddata, false);
+ cpcap_charger_set_inductive_path(ddata, false);
+
+ error = cpcap_charger_set_state(ddata, 0, 0, 0);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+ CPCAP_REG_CRM_RVRSMODE,
+ CPCAP_REG_CRM_RVRSMODE);
+ if (error)
+ goto out_err;
+ } else {
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+ CPCAP_REG_CRM_RVRSMODE, 0);
+ if (error)
+ goto out_err;
+
+ cpcap_charger_set_cable_path(ddata, true);
+ cpcap_charger_set_inductive_path(ddata, true);
+ }
+
+ return;
+
+out_err:
+ dev_err(ddata->dev, "%s could not %s vbus: %i\n", __func__,
+ ddata->vbus_enabled ? "enable" : "disable", error);
+}
+
+static int cpcap_charger_set_vbus(struct phy_companion *comparator,
+ bool enabled)
+{
+ struct cpcap_charger_ddata *ddata =
+ container_of(comparator, struct cpcap_charger_ddata,
+ comparator);
+
+ ddata->vbus_enabled = enabled;
+ schedule_delayed_work(&ddata->vbus_work, 0);
+
+ return 0;
+}
+
+/* Charger interrupt handling functions */
+
+static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata,
+ struct cpcap_charger_ints_state *s)
+{
+ int val, error;
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val);
+ if (error)
+ return error;
+
+ s->chrg_det = val & BIT(13);
+ s->rvrs_chrg = val & BIT(12);
+ s->vbusov = val & BIT(11);
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val);
+ if (error)
+ return error;
+
+ s->chrg_se1b = val & BIT(13);
+ s->rvrs_mode = val & BIT(6);
+ s->chrgcurr1 = val & BIT(4);
+ s->vbusvld = val & BIT(3);
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val);
+ if (error)
+ return error;
+
+ s->battdetb = val & BIT(6);
+
+ return 0;
+}
+
+static void cpcap_usb_detect(struct work_struct *work)
+{
+ struct cpcap_charger_ddata *ddata;
+ struct cpcap_charger_ints_state s;
+ int error;
+
+ ddata = container_of(work, struct cpcap_charger_ddata,
+ detect_work.work);
+
+ error = cpcap_charger_get_ints_state(ddata, &s);
+ if (error)
+ return;
+
+ if (cpcap_charger_vbus_valid(ddata) && s.chrgcurr1) {
+ int max_current;
+
+ if (cpcap_charger_battery_found(ddata))
+ max_current = CPCAP_REG_CRM_ICHRG_1A584;
+ else
+ max_current = CPCAP_REG_CRM_ICHRG_0A528;
+
+ error = cpcap_charger_set_state(ddata,
+ CPCAP_REG_CRM_VCHRG_4V20,
+ max_current,
+ CPCAP_REG_CRM_TR_0A72);
+ if (error)
+ goto out_err;
+ } else {
+ error = cpcap_charger_set_state(ddata, 0, 0, 0);
+ if (error)
+ goto out_err;
+ }
+
+ return;
+
+out_err:
+ dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+}
+
+static irqreturn_t cpcap_charger_irq_thread(int irq, void *data)
+{
+ struct cpcap_charger_ddata *ddata = data;
+
+ if (!atomic_read(&ddata->active))
+ return IRQ_NONE;
+
+ schedule_delayed_work(&ddata->detect_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+static int cpcap_usb_init_irq(struct platform_device *pdev,
+ struct cpcap_charger_ddata *ddata,
+ const char *name)
+{
+ struct cpcap_interrupt_desc *d;
+ int irq, error;
+
+ irq = platform_get_irq_byname(pdev, name);
+ if (!irq)
+ return -ENODEV;
+
+ error = devm_request_threaded_irq(ddata->dev, irq, NULL,
+ cpcap_charger_irq_thread,
+ IRQF_SHARED,
+ name, ddata);
+ if (error) {
+ dev_err(ddata->dev, "could not get irq %s: %i\n",
+ name, error);
+
+ return error;
+ }
+
+ d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ d->name = name;
+ d->irq = irq;
+ list_add(&d->node, &ddata->irq_list);
+
+ return 0;
+}
+
+static const char * const cpcap_charger_irqs[] = {
+ /* REG_INT_0 */
+ "chrg_det", "rvrs_chrg",
+
+ /* REG_INT1 */
+ "chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr1", "vbusvld",
+
+ /* REG_INT_3 */
+ "battdetb",
+};
+
+static int cpcap_usb_init_interrupts(struct platform_device *pdev,
+ struct cpcap_charger_ddata *ddata)
+{
+ int i, error;
+
+ for (i = 0; i < ARRAY_SIZE(cpcap_charger_irqs); i++) {
+ error = cpcap_usb_init_irq(pdev, ddata, cpcap_charger_irqs[i]);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+static void cpcap_charger_init_optional_gpios(struct cpcap_charger_ddata *ddata)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode",
+ i, GPIOD_OUT_HIGH);
+ if (IS_ERR(ddata->gpio[i])) {
+ dev_info(ddata->dev, "no mode change GPIO%i: %li\n",
+ i, PTR_ERR(ddata->gpio[i]));
+ ddata->gpio[i] = NULL;
+ }
+ }
+}
+
+static int cpcap_charger_init_iio(struct cpcap_charger_ddata *ddata)
+{
+ const char * const names[CPCAP_CHARGER_IIO_NR] = {
+ "battdetb", "battp", "vbus", "chg_isense", "batti",
+ };
+ int error, i;
+
+ for (i = 0; i < CPCAP_CHARGER_IIO_NR; i++) {
+ ddata->channels[i] = devm_iio_channel_get(ddata->dev,
+ names[i]);
+ if (IS_ERR(ddata->channels[i])) {
+ error = PTR_ERR(ddata->channels[i]);
+ goto out_err;
+ }
+
+ if (!ddata->channels[i]->indio_dev) {
+ error = -ENXIO;
+ goto out_err;
+ }
+ }
+
+ return 0;
+
+out_err:
+ dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n",
+ error);
+
+ return error;
+}
+
+static const struct power_supply_desc cpcap_charger_usb_desc = {
+ .name = "cpcap_usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = cpcap_charger_props,
+ .num_properties = ARRAY_SIZE(cpcap_charger_props),
+ .get_property = cpcap_charger_get_property,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id cpcap_charger_id_table[] = {
+ {
+ .compatible = "motorola,mapphone-cpcap-charger",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cpcap_charger_id_table);
+#endif
+
+static int cpcap_charger_probe(struct platform_device *pdev)
+{
+ struct cpcap_charger_ddata *ddata;
+ const struct of_device_id *of_id;
+ int error;
+
+ of_id = of_match_device(of_match_ptr(cpcap_charger_id_table),
+ &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->dev = &pdev->dev;
+
+ ddata->reg = dev_get_regmap(ddata->dev->parent, NULL);
+ if (!ddata->reg)
+ return -ENODEV;
+
+ INIT_LIST_HEAD(&ddata->irq_list);
+ INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect);
+ INIT_DELAYED_WORK(&ddata->vbus_work, cpcap_charger_vbus_work);
+ platform_set_drvdata(pdev, ddata);
+
+ error = cpcap_charger_init_iio(ddata);
+ if (error)
+ return error;
+
+ atomic_set(&ddata->active, 1);
+
+ ddata->usb = devm_power_supply_register(ddata->dev,
+ &cpcap_charger_usb_desc,
+ NULL);
+ if (IS_ERR(ddata->usb)) {
+ error = PTR_ERR(ddata->usb);
+ dev_err(ddata->dev, "failed to register USB charger: %i\n",
+ error);
+
+ return error;
+ }
+
+ error = cpcap_usb_init_interrupts(pdev, ddata);
+ if (error)
+ return error;
+
+ ddata->comparator.set_vbus = cpcap_charger_set_vbus;
+ error = omap_usb2_set_comparator(&ddata->comparator);
+ if (error == -ENODEV) {
+ dev_info(ddata->dev, "charger needs phy, deferring probe\n");
+ return -EPROBE_DEFER;
+ }
+
+ cpcap_charger_init_optional_gpios(ddata);
+
+ schedule_delayed_work(&ddata->detect_work, 0);
+
+ return 0;
+}
+
+static int cpcap_charger_remove(struct platform_device *pdev)
+{
+ struct cpcap_charger_ddata *ddata = platform_get_drvdata(pdev);
+ int error;
+
+ atomic_set(&ddata->active, 0);
+ error = omap_usb2_set_comparator(NULL);
+ if (error)
+ dev_warn(ddata->dev, "could not clear USB comparator: %i\n",
+ error);
+
+ error = cpcap_charger_set_state(ddata, 0, 0, 0);
+ if (error)
+ dev_warn(ddata->dev, "could not clear charger: %i\n",
+ error);
+ cancel_delayed_work_sync(&ddata->vbus_work);
+ cancel_delayed_work_sync(&ddata->detect_work);
+
+ return 0;
+}
+
+static struct platform_driver cpcap_charger_driver = {
+ .probe = cpcap_charger_probe,
+ .driver = {
+ .name = "cpcap-charger",
+ .of_match_table = of_match_ptr(cpcap_charger_id_table),
+ },
+ .remove = cpcap_charger_remove,
+};
+module_platform_driver(cpcap_charger_driver);
+
+MODULE_AUTHOR("Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>");
+MODULE_DESCRIPTION("CPCAP Battery Charger Interface driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cpcap-charger");
--
2.12.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH v5 00/13] ACPI graph support
From: Sakari Ailus @ 2017-03-26 21:17 UTC (permalink / raw)
To: Mika Westerberg
Cc: linux-acpi, devicetree, sudeep.holla, lorenzo.pieralisi, rafael,
mark.rutland, broonie, robh, ahs3
In-Reply-To: <20170324154556.GD2957@lahna.fi.intel.com>
Hi Mika,
Mika Westerberg wrote:
> On Thu, Mar 16, 2017 at 02:31:08PM +0200, Sakari Ailus wrote:
>> Hello everyone,
>>
>> This is the fifth version of the ACPI graph support patchset.
>>
>> The previous RFC version of the set is available here:
>>
>> <URL:http://www.spinics.net/lists/linux-acpi/msg69547.html>
>>
>> There are also v1, v2, v3 and v4 which can be found here:
>>
>> <URL:http://www.spinics.net/lists/linux-acpi/msg71661.html>
>> <URL:http://www.spinics.net/lists/linux-acpi/msg71809.html>
>> <URL:http://www.spinics.net/lists/linux-acpi/msg72171.html>
>> <URL:http://www.spinics.net/lists/linux-acpi/msg72346.html>
>>
>> This set contains patches written by Mika Westerberg and by myself. The
>> patchset brings support for graphs to ACPI. The functionality achieved by
>> these patches is very similar to what the Device tree provides: the port
>> and the endpoint concept are being employed. The patches make use of the
>> _DSD property and data extensions to achieve this. The fwnode interface is
>> extended by graph functionality; this way graph information originating
>> from both OF and ACPI may be accessed using the same interface, without
>> being aware of the underlying firmware interface.
>>
>> The last patch of the set contains ASL documentation including an example.
>
> It would be helpful if you include similar diffstat here as running 'git
> format-patch --cover-letter ...' generates.
>
> Anyway for patches 7-13,
>
> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Thanks! This is much appreciated.
Could you also review the other related patches? There are just a few
and they're relatively simple:
Set of three patches (which precedes what you reviewed):
<URL:http://www.spinics.net/lists/linux-acpi/msg72895.html>
And then finally:
<URL:http://www.spinics.net/lists/linux-acpi/msg72888.html>
--
Regards,
Sakari Ailus
sakari.ailus@linux.intel.com
^ permalink raw reply
* Re: [PATCH 7/15] dt-bindings: display: sun4i: Add allwinner,tcon-channel property
From: Maxime Ripard @ 2017-03-26 21:11 UTC (permalink / raw)
To: Chen-Yu Tsai
Cc: Rob Herring, Mike Turquette, Stephen Boyd, dri-devel,
Daniel Vetter, David Airlie, Mark Rutland, devicetree, linux-clk,
linux-arm-kernel, linux-kernel, linux-sunxi
In-Reply-To: <CAGb2v67A2T4KeLBttAGLKoo7igBTnQH+5yxN-jJo1k7Ewfd9mQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 2119 bytes --]
On Fri, Mar 17, 2017 at 11:34:45AM +0800, Chen-Yu Tsai wrote:
> On Thu, Mar 16, 2017 at 1:37 AM, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> > On Tue, Mar 07, 2017 at 09:56:26AM +0100, Maxime Ripard wrote:
> >> The Allwinner Timings Controller has two, mutually exclusive, channels.
> >> When the binding has been introduced, it was assumed that there would be
> >> only a single user per channel in the system.
> >>
> >> While this is likely for the channel 0 which only connects to LCD displays,
> >> it turns out that the channel 1 can be connected to multiple controllers in
> >> the SoC (HDMI and TV encoders for example). And while the simultaneous use
> >> of HDMI and TV outputs cannot be achieved, switching from one to the other
> >> at runtime definitely sounds plausible.
> >>
> >> Add an extra property, allwinner,tcon-channel, to specify for a given
> >> endpoint which TCON channel it is connected to, while falling back to the
> >> previous mechanism if that property is missing.
> >
> > I think perhaps TCON channels should have been ports rather than
> > endpoints. The fact that the channels are mutually exclusive can be
> > handled in the driver and doesn't really matter in the binding. How
> > painful would it be to rework things to move TCON channel 1 from port 0,
> > endpoint 1 to port 1?
>
> Having a separate output port for channel 1 was one option we discussed.
> However it wouldn't work well with the kernel's of_graph based crtc
> detection (drm_of_find_possible_crtcs / drm_of_find_possible_crtcs),
> which has the crtcs bound via the output port. As the logic is used
> by multiple drivers, I'm not sure it's easy to rework or test.
Can't we use a different logic than drm_of_find_possible_crtcs to fill
the same role?
> Also, we still have to support old device trees using channel 1 from
> output port 0 endpoint 1. This is the TV encoder on sun5i (A10s/A13/R8).
We could probably work something out if we go that way to deal with
old DTs though.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply
* Re: [PATCH v3 4/4] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan
From: Ralph Sennhauser @ 2017-03-26 21:05 UTC (permalink / raw)
To: Andrew Lunn
Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA, Imre Kaloz, Thierry Reding,
Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Jason Cooper, Gregory Clement, Sebastian Hesselbarth,
Russell King, linux-pwm-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <20170324143505.GK28518-g2DYL2Zd6BY@public.gmane.org>
On Fri, 24 Mar 2017 15:35:05 +0100
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org> wrote:
> > + pwm_fan {
> > /* SUNON HA4010V4-0000-C99 */
> > - compatible = "gpio-fan";
> > - gpios = <&gpio0 24 0>;
> >
> > - gpio-fan,speed-map = <0 0
> > - 4500 1>;
> > + compatible = "pwm-fan";
> > + pwms = <&gpio0 24 4000 0>;
>
> Hi Ralph
>
> I believe this last 0 is the flags parameter. Now that we have
> #pwm-cells = 1, i think this last 0 should be dropped.
>
> Andrew
Hi Andrew,
isn't the 4000 (period?) pwm-cell #2 and 0 (flags?) pwm-cell #3? I
actually expect "pwms = <&gpio0 24>;" here or "#pwm-cells = <2>;"
Ralph
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v2 6/6] clk: sunxi-ng: Display index when clock registration fails
From: Priit Laes @ 2017-03-26 17:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng, Russell King,
Chen-Yu Tsai, Maxime Ripard, Mark Rutland, Rob Herring,
Stephen Boyd, Michael Turquette, Philipp Zabel, Priit Laes
In-Reply-To: <cover.a58841efb571d44013658505f3fa140536a89d1c.1490545262.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Add clock index to clock registration failure message.
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
drivers/clk/sunxi-ng/ccu_common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_common.c b/drivers/clk/sunxi-ng/ccu_common.c
index 8a47baf..188fa50 100644
--- a/drivers/clk/sunxi-ng/ccu_common.c
+++ b/drivers/clk/sunxi-ng/ccu_common.c
@@ -63,8 +63,8 @@ int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
ret = clk_hw_register(NULL, hw);
if (ret) {
- pr_err("Couldn't register clock %s\n",
- clk_hw_get_name(hw));
+ pr_err("Couldn't register clock %d - %s\n",
+ i, clk_hw_get_name(hw));
goto err_clk_unreg;
}
}
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v2 5/6] dt-bindings: List devicetree binding for the CCU of Allwinner A10
From: Priit Laes @ 2017-03-26 17:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng, Russell King,
Chen-Yu Tsai, Maxime Ripard, Mark Rutland, Rob Herring,
Stephen Boyd, Michael Turquette, Philipp Zabel, Priit Laes
In-Reply-To: <cover.a58841efb571d44013658505f3fa140536a89d1c.1490545262.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Allwinner A10 is now driven by sunxi-ng CCU driver.
Add devicetree binding for it.
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index de90988..db49cbc 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -3,6 +3,7 @@ Allwinner Clock Control Unit Binding
Required properties :
- compatible: must contain one of the following compatibles:
+ - "allwinner,sun4i-a10-ccu"
- "allwinner,sun6i-a31-ccu"
- "allwinner,sun7i-a20-ccu"
- "allwinner,sun8i-a23-ccu"
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v2 4/6] dt-bindings: List devicetree binding for the CCU of Allwinner A20
From: Priit Laes @ 2017-03-26 17:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng, Russell King,
Chen-Yu Tsai, Maxime Ripard, Mark Rutland, Rob Herring,
Stephen Boyd, Michael Turquette, Philipp Zabel, Priit Laes
In-Reply-To: <cover.a58841efb571d44013658505f3fa140536a89d1c.1490545262.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Allwinner A20 is now driven by sunxi-ng CCU driver.
Add devicetree binding for it.
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 68512aa..de90988 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -4,6 +4,7 @@ Allwinner Clock Control Unit Binding
Required properties :
- compatible: must contain one of the following compatibles:
- "allwinner,sun6i-a31-ccu"
+ - "allwinner,sun7i-a20-ccu"
- "allwinner,sun8i-a23-ccu"
- "allwinner,sun8i-a33-ccu"
- "allwinner,sun8i-h3-ccu"
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v2 3/6] ARM: sun4i: Convert to CCU
From: Priit Laes @ 2017-03-26 17:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng, Russell King,
Chen-Yu Tsai, Maxime Ripard, Mark Rutland, Rob Herring,
Stephen Boyd, Michael Turquette, Philipp Zabel, Priit Laes
In-Reply-To: <cover.a58841efb571d44013658505f3fa140536a89d1c.1490545262.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Convert sun4i-a10.dtsi to new CCU driver.
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 636 ++++----------------------------
1 file changed, 82 insertions(+), 554 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index ba20b48..0d8320a 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -45,7 +45,8 @@
#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/clock/sunxi-a10-a20-ccu.h>
+#include <dt-bindings/reset/sunxi-a10-a20-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -65,9 +66,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -75,10 +76,11 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_TCON0_CH1>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -86,9 +88,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -96,11 +99,11 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 5>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
@@ -112,7 +115,7 @@
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -168,18 +171,6 @@
#size-cells = <1>;
ranges;
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
osc24M: clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
@@ -188,487 +179,12 @@
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk@01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk@01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll3>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- pll7: clk@01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll7>;
- clock-output-names = "pll7-2x";
- };
-
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-indices = <0>;
- clock-output-names = "axi_dram";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
- };
-
- ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <4>, <5>, <6>,
- <7>, <8>, <9>,
- <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>,
- <21>, <22>, <23>,
- <24>, <25>, <26>,
- <32>, <33>, <34>,
- <35>, <36>, <37>,
- <40>, <41>, <43>,
- <44>, <45>,
- <46>, <47>,
- <50>, <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1",
- "ahb_ohci1", "ahb_ss", "ahb_dma",
- "ahb_bist", "ahb_mmc0", "ahb_mmc1",
- "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0",
- "ahb_spi1", "ahb_spi2", "ahb_spi3",
- "ahb_pata", "ahb_sata", "ahb_gps",
- "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
- "ahb_csi0", "ahb_csi1", "ahb_hdmi",
- "ahb_de_be0", "ahb_de_be1",
- "ahb_de_fe0", "ahb_de_fe1",
- "ahb_mp", "ahb_mali400";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <5>, <6>,
- <7>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_iis",
- "apb0_pio", "apb0_ir0",
- "apb0_ir1", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <4>,
- <5>, <6>,
- <7>, <16>,
- <17>, <18>,
- <19>, <20>,
- <21>, <22>,
- <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_can",
- "apb1_scr", "apb1_ps20",
- "apb1_ps21", "apb1_uart0",
- "apb1_uart1", "apb1_uart2",
- "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6",
- "apb1_uart7";
- };
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: clk@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: clk@01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- spdif_clk: clk@01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- dram_gates: clk@01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: clk@01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: clk@01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: clk@01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: clk@01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
-
- tcon0_ch0_clk: clk@01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: clk@01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: clk@01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: clk@01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: clk@01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
};
soc@01c00000 {
@@ -717,7 +233,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <27>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
@@ -725,7 +241,7 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -738,7 +254,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -752,7 +268,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -766,7 +282,7 @@
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
@@ -782,10 +298,10 @@
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -799,10 +315,10 @@
mmc1: mmc@01c10000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -816,10 +332,10 @@
mmc2: mmc@01c11000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -833,10 +349,10 @@
mmc3: mmc@01c12000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC3>,
+ <&ccu CLK_MMC3>,
+ <&ccu CLK_MMC3_OUTPUT>,
+ <&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -850,7 +366,7 @@
usb_otg: usb@01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <38>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -865,9 +381,11 @@
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
@@ -876,7 +394,7 @@
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -886,7 +404,7 @@
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <64>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -896,7 +414,7 @@
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <86>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
@@ -904,7 +422,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -918,7 +436,8 @@
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <56>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu CLK_PLL_PERIPH_SATA>,
+ <&ccu CLK_AHB_SATA>;
status = "disabled";
};
@@ -926,7 +445,7 @@
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <40>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -936,7 +455,7 @@
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <65>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -946,7 +465,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <50>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -956,6 +475,15 @@
#size-cells = <0>;
};
+ ccu: clock@01c20000 {
+ compatible = "allwinner,sun4i-a10-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-a10-ic";
reg = <0x01c20400 0x400>;
@@ -967,7 +495,7 @@
compatible = "allwinner,sun4i-a10-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <28>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -1145,7 +673,7 @@
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <13>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1155,7 +683,7 @@
ir0: ir@01c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <5>;
reg = <0x01c21800 0x40>;
@@ -1164,7 +692,7 @@
ir1: ir@01c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <6>;
reg = <0x01c21c00 0x40>;
@@ -1183,7 +711,7 @@
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
interrupts = <30>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1209,7 +737,7 @@
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
@@ -1219,7 +747,7 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
@@ -1229,7 +757,7 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
@@ -1239,7 +767,7 @@
interrupts = <4>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
@@ -1249,7 +777,7 @@
interrupts = <17>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
@@ -1259,7 +787,7 @@
interrupts = <18>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
@@ -1269,7 +797,7 @@
interrupts = <19>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
@@ -1279,7 +807,7 @@
interrupts = <20>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
@@ -1287,7 +815,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1297,7 +825,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1307,7 +835,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1317,7 +845,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <62>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu CLK_APB1_PS20>;
status = "disabled";
};
@@ -1325,7 +853,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <63>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu CLK_APB1_PS21>;
status = "disabled";
};
};
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v2 2/6] ARM: sun7i: Convert to CCU
From: Priit Laes @ 2017-03-26 17:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng, Russell King,
Chen-Yu Tsai, Maxime Ripard, Mark Rutland, Rob Herring,
Stephen Boyd, Michael Turquette, Philipp Zabel, Priit Laes
In-Reply-To: <cover.a58841efb571d44013658505f3fa140536a89d1c.1490545262.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Convert sun7i-a20.dtsi to new CCU driver.
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 717 +++-----------------------------
1 file changed, 85 insertions(+), 632 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 2db97fc..9521194 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -47,7 +47,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/clock/sunxi-a10-a20-ccu.h>
+#include <dt-bindings/reset/sunxi-a10-a20-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -67,9 +68,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -77,9 +78,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -87,10 +88,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 5>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+ <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
@@ -103,7 +104,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -184,21 +185,11 @@
osc24M: clk@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
+ compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -206,528 +197,6 @@
clock-output-names = "osc32k";
};
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk@01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk@01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll3>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6",
- "pll6_div_4";
- };
-
- pll7: clk@01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll7>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll7-2x";
- };
-
- pll8: clk@01c20040 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20040 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll8";
- };
-
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>, <&pll6 3>, <&pll6 1>;
- clock-output-names = "ahb";
- /*
- * Use PLL6 as parent, instead of CPU/AXI
- * which has rate changes due to cpufreq
- */
- assigned-clocks = <&ahb>;
- assigned-clock-parents = <&pll6 3>;
- };
-
- ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>, <8>,
- <9>, <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>, <21>,
- <22>, <23>, <25>,
- <28>, <32>, <33>, <34>,
- <35>, <36>, <37>, <40>,
- <41>, <42>, <43>,
- <44>, <45>, <46>,
- <47>, <49>, <50>,
- <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
- "ahb_spi2", "ahb_spi3", "ahb_sata",
- "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
- "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
- "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
- "ahb_de_fe1", "ahb_gmac", "ahb_mp",
- "ahb_mali";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <8>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- "apb0_pio", "apb0_ir0", "apb0_ir1",
- "apb0_i2s2", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <15>, <16>, <17>,
- <18>, <19>, <20>,
- <21>, <22>, <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_can",
- "apb1_scr", "apb1_ps20", "apb1_ps21",
- "apb1_i2c4", "apb1_uart0", "apb1_uart1",
- "apb1_uart2", "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6", "apb1_uart7";
- };
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: clk@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: clk@01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- i2s0_clk: clk@01c200b8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200b8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s0";
- };
-
- ac97_clk: clk@01c200bc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200bc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "ac97";
- };
-
- spdif_clk: clk@01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- keypad_clk: clk@01c200c4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200c4 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "keypad";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- i2s1_clk: clk@01c200d8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200d8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s1";
- };
-
- i2s2_clk: clk@01c200dc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200dc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s2";
- };
-
- dram_gates: clk@01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: clk@01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: clk@01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: clk@01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: clk@01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
- tcon0_ch0_clk: clk@01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: clk@01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: clk@01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: clk@01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: clk@01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
- clock-output-names = "mbus";
- };
-
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
@@ -737,14 +206,14 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: clk@2 {
+ mii_phy_tx_clk: clk@1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
- gmac_int_tx_clk: clk@3 {
+ gmac_int_tx_clk: clk@2 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -758,34 +227,6 @@
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac_tx";
};
-
- /*
- * Dummy clock used by output clocks
- */
- osc24M_32k: clk@1 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <750>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc24M_32k";
- };
-
- clk_out_a: clk@01c201f0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f0 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_a";
- };
-
- clk_out_b: clk@01c201f4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f4 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_b";
- };
};
soc@01c00000 {
@@ -842,7 +283,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
@@ -850,7 +291,7 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -863,7 +304,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -878,7 +319,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -893,7 +334,7 @@
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
@@ -909,10 +350,10 @@
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -926,10 +367,10 @@
mmc1: mmc@01c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -943,10 +384,10 @@
mmc2: mmc@01c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -960,10 +401,10 @@
mmc3: mmc@01c12000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC3>,
+ <&ccu CLK_MMC3>,
+ <&ccu CLK_MMC3_OUTPUT>,
+ <&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -977,7 +418,7 @@
usb_otg: usb@01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -992,9 +433,11 @@
compatible = "allwinner,sun7i-a20-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
@@ -1003,7 +446,7 @@
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -1013,7 +456,7 @@
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -1023,7 +466,7 @@
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
@@ -1031,7 +474,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -1046,7 +489,8 @@
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu CLK_PLL_PERIPH_SATA>,
+ <&ccu CLK_AHB_SATA>;
status = "disabled";
};
@@ -1054,7 +498,7 @@
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -1064,7 +508,7 @@
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -1074,7 +518,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -1085,11 +529,20 @@
num-cs = <1>;
};
+ ccu: clock@01c20000 {
+ compatible = "allwinner,sun7i-a20-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -1361,7 +814,7 @@
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1371,7 +824,7 @@
ir0: ir@01c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
@@ -1380,7 +833,7 @@
ir1: ir@01c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
@@ -1392,7 +845,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 4>, <&i2s1_clk>;
+ clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 4>,
<&dma SUN4I_DMA_NORMAL 4>;
@@ -1405,7 +858,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 3>, <&i2s0_clk>;
+ clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 3>,
<&dma SUN4I_DMA_NORMAL 3>;
@@ -1425,7 +878,7 @@
compatible = "allwinner,sun7i-a20-codec";
reg = <0x01c22c00 0x40>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1443,7 +896,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c24400 0x400>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 8>, <&i2s2_clk>;
+ clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 6>,
<&dma SUN4I_DMA_NORMAL 6>;
@@ -1464,7 +917,7 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
@@ -1474,7 +927,7 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
@@ -1484,7 +937,7 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
@@ -1494,7 +947,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
@@ -1504,7 +957,7 @@
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
@@ -1514,7 +967,7 @@
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
@@ -1524,7 +977,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
@@ -1534,7 +987,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
@@ -1543,7 +996,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1554,7 +1007,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1565,7 +1018,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1576,7 +1029,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 3>;
+ clocks = <&ccu CLK_APB1_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1587,7 +1040,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 15>;
+ clocks = <&ccu CLK_APB1_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1598,7 +1051,7 @@
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
snps,pbl = <2>;
snps,fixed-burst;
@@ -1615,7 +1068,7 @@
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 28>;
+ clocks = <&ccu CLK_AHB_HSTIMER>;
};
gic: interrupt-controller@01c81000 {
@@ -1633,7 +1086,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu CLK_APB1_PS20>;
status = "disabled";
};
@@ -1641,7 +1094,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu CLK_APB1_PS21>;
status = "disabled";
};
};
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v2 1/6] clk: sunxi-ng: Add sun4i/sun7i CCU driver
From: Priit Laes @ 2017-03-26 17:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw, Icenowy Zheng, Russell King,
Chen-Yu Tsai, Maxime Ripard, Mark Rutland, Rob Herring,
Stephen Boyd, Michael Turquette, Philipp Zabel, Priit Laes
In-Reply-To: <cover.a58841efb571d44013658505f3fa140536a89d1c.1490545262.git-series.plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
drivers/clk/sunxi-ng/Kconfig | 13 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.c | 1532 ++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.h | 59 +-
include/dt-bindings/clock/sunxi-a10-a20-ccu.h | 208 ++-
include/dt-bindings/reset/sunxi-a10-a20-ccu.h | 66 +-
6 files changed, 1879 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.h
create mode 100644 include/dt-bindings/clock/sunxi-a10-a20-ccu.h
create mode 100644 include/dt-bindings/reset/sunxi-a10-a20-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 213cf64..abed614 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -65,6 +65,19 @@ config SUN50I_A64_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUNXI_A10_A20_CCU
+ bool "Support for the Allwinner A10/A20 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_MULT
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN4I
+ default MACH_SUN7I
+ depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
config SUN5I_CCU
bool "Support for the Allwinner sun5i family CCM"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 6feaac0..90bab0e 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
+obj-$(CONFIG_SUNXI_A10_A20_CCU) += ccu-sunxi-a10-a20.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
diff --git a/drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.c b/drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.c
new file mode 100644
index 0000000..1884f5f
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.c
@@ -0,0 +1,1532 @@
+/*
+ * Copyright (c) 2017 Priit Laes. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sunxi-a10-a20.h"
+
+static struct ccu_nkmp pll_core_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-core",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN4I_PLL_AUDIO_REG 0x008
+static struct ccu_nm pll_audio_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+ .m = _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+ .common = {
+ .reg = 0x008,
+ .hw.init = CLK_HW_INIT("pll-audio-base",
+ "hosc",
+ &ccu_nm_ops,
+ 0),
+ },
+
+};
+
+static struct ccu_mult pll_video0_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x010,
+ .features = (CCU_FEATURE_FRACTIONAL |
+ CCU_FEATURE_ALL_PREDIV),
+ .prediv = 8,
+ .hw.init = CLK_HW_INIT("pll-video0",
+ "hosc",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static struct ccu_nkmp pll_ve_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2,
+ CLK_IS_CRITICAL);
+
+static struct ccu_div pll_ddr_other_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_periph_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .fixed_post_div = 2,
+ .common = {
+ .reg = 0x028,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+/* Not documented on A10 */
+static SUNXI_CCU_GATE(pll_periph_sata_clk, "pll-periph-sata", "pll-periph",
+ 0x028, BIT(14), 0);
+
+static struct ccu_mult pll_video1_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x030,
+ .features = (CCU_FEATURE_FRACTIONAL |
+ CCU_FEATURE_ALL_PREDIV),
+ .prediv = 8,
+ .hw.init = CLK_HW_INIT("pll-video1",
+ "hosc",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+/* Not present on A10 */
+static struct ccu_nk pll_gpu_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x040,
+ .hw.init = CLK_HW_INIT("pll-gpu",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(hosc_clk, "hosc", "osc24M", 0x050, BIT(0), 0);
+
+static const char *const cpu_parents[] = { "osc32k", "hosc",
+ "pll-core", "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+ { .index = 3, .div = 3, },
+};
+
+#define SUN4I_AHB_REG 0x054
+static struct ccu_mux cpu_clk = {
+ .mux = {
+ .shift = 16,
+ .width = 2,
+ .fixed_predivs = cpu_predivs,
+ .n_predivs = ARRAY_SIZE(cpu_predivs),
+ },
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("cpu",
+ cpu_parents,
+ &ccu_mux_ops,
+ CLK_IS_CRITICAL),
+ }
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static const char *const ahb_parents[] = { "axi", "pll-periph",
+ "pll-periph-2x" };
+static const struct ccu_mux_fixed_prediv ahb_predivs[] = {
+ { .index = 2, .div = 2, },
+};
+
+/* Undocumented on A10 */
+static struct ccu_div ahb_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = {
+ .shift = 6,
+ .width = 2,
+ .fixed_predivs = ahb_predivs,
+ .n_predivs = ARRAY_SIZE(ahb_predivs),
+ },
+
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb",
+ ahb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb0_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+ 0x054, 8, 2, apb0_div_table, 0);
+
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "ahb",
+ 0x05c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
+ 0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci0_clk, "ahb-ehci0", "ahb",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci0_clk, "ahb-ohci0", "ahb",
+ 0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ehci1_clk, "ahb-ehci1", "ahb",
+ 0x060, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_ohci1_clk, "ahb-ohci1", "ahb",
+ 0x060, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb",
+ 0x060, BIT(7), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk, "ahb-mmc2", "ahb",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_mmc3_clk, "ahb-mmc3", "ahb",
+ 0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_ms_clk, "ahb-ms", "ahb",
+ 0x060, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk, "ahb-nand", "ahb",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk, "ahb-sdram", "ahb",
+ 0x060, BIT(14), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(ahb_ace_clk, "ahb-ace", "ahb",
+ 0x060, BIT(16), 0);
+static SUNXI_CCU_GATE(ahb_emac_clk, "ahb-emac", "ahb",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_ts_clk, "ahb-ts", "ahb",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_spi0_clk, "ahb-spi0", "ahb",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi1_clk, "ahb-spi1", "ahb",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk, "ahb-spi2", "ahb",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_spi3_clk, "ahb-spi3", "ahb",
+ 0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(ahb_pata_clk, "ahb-pata", "ahb",
+ 0x060, BIT(24), 0);
+/* Not documented on A20 */
+static SUNXI_CCU_GATE(ahb_sata_clk, "ahb-sata", "ahb",
+ 0x060, BIT(25), 0);
+/* Not present on A20 */
+static SUNXI_CCU_GATE(ahb_gps_clk, "ahb-gps", "ahb",
+ 0x060, BIT(26), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hstimer_clk, "ahb-hstimer", "ahb",
+ 0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk, "ahb-ve", "ahb",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tvd_clk, "ahb-tvd", "ahb",
+ 0x064, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_tve0_clk, "ahb-tve0", "ahb",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_tve1_clk, "ahb-tve1", "ahb",
+ 0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_lcd0_clk, "ahb-lcd0", "ahb",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_lcd1_clk, "ahb-lcd1", "ahb",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_csi0_clk, "ahb-csi0", "ahb",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_csi1_clk, "ahb-csi1", "ahb",
+ 0x064, BIT(9), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hdmi1_clk, "ahb-hdmi1", "ahb",
+ 0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_hdmi0_clk, "ahb-hdmi0", "ahb",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_de_be0_clk, "ahb-de-be0", "ahb",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_be1_clk, "ahb-de-be1", "ahb",
+ 0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_de_fe0_clk, "ahb-de-fe0", "ahb",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_de_fe1_clk, "ahb-de-fe1", "ahb",
+ 0x064, BIT(15), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_gmac_clk, "ahb-gmac", "ahb",
+ 0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_mp_clk, "ahb-mp", "ahb",
+ 0x064, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk, "ahb-gpu", "ahb",
+ 0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk, "apb0-codec", "apb0",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_spdif_clk, "apb0-spdif", "apb0",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(apb0_ac97_clk, "apb0-ac97", "apb0",
+ 0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(apb0_i2s0_clk, "apb0-i2s0", "apb0",
+ 0x068, BIT(3), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s1_clk, "apb0-i2s1", "apb0",
+ 0x068, BIT(4), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk, "apb0-pio", "apb0",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir0_clk, "apb0-ir0", "apb0",
+ 0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(apb0_ir1_clk, "apb0-ir1", "apb0",
+ 0x068, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s2_clk, "apb0-i2s2", "apb0",
+ 0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(apb0_keypad_clk, "apb0-keypad", "apb0",
+ 0x068, BIT(10), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk, "apb1-i2c0", "apb1",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk, "apb1-i2c1", "apb1",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk, "apb1-i2c2", "apb1",
+ 0x06c, BIT(2), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c3_clk, "apb1-i2c3", "apb1",
+ 0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(apb1_can_clk, "apb1-can", "apb1",
+ 0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(apb1_scr_clk, "apb1-scr", "apb1",
+ 0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(apb1_ps20_clk, "apb1-ps20", "apb1",
+ 0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(apb1_ps21_clk, "apb1-ps21", "apb1",
+ 0x06c, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c4_clk, "apb1-i2c4", "apb1",
+ 0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk, "apb1-uart0", "apb1",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk, "apb1-uart1", "apb1",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk, "apb1-uart2", "apb1",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk, "apb1-uart3", "apb1",
+ 0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(apb1_uart4_clk, "apb1-uart4", "apb1",
+ 0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(apb1_uart5_clk, "apb1-uart5", "apb1",
+ 0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(apb1_uart6_clk, "apb1-uart6", "apb1",
+ 0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(apb1_uart7_clk, "apb1-uart7", "apb1",
+ 0x06c, BIT(23), 0);
+
+static const char *const mod0_default_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(ms_clk, "ms", mod0_default_parents, 0x084,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+/* Undocumented on A10 */
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+ 0x088, 8, 3, 0);
+/* Undocumented on A10 */
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+ 0x088, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+/* Undocumented on A10 */
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+ 0x08c, 8, 3, 0);
+/* Undocumented on A10 */
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+ 0x08c, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+/* Undocumented on A10 */
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+ 0x090, 8, 3, 0);
+/* Undocumented on A10 */
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+ 0x090, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+/* Undocumented on A10 */
+static SUNXI_CCU_PHASE(mmc3_output_clk, "mmc3_output", "mmc3",
+ 0x094, 8, 3, 0);
+/* Undocumented on A10 */
+static SUNXI_CCU_PHASE(mmc3_sample_clk, "mmc3_sample", "mmc3",
+ 0x094, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(pata_clk, "pata", mod0_default_parents, 0x0ac,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* TODO: Check whether A10 actually supports osc32k as 4th parent? */
+static const char *const ir_parents_sun4i[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun4i_clk, "ir0", ir_parents_sun4i, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun4i_clk, "ir1", ir_parents_sun4i, 0x0b4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+static const char *const ir_parents_sun7i[] = { "hosc", "pll-periph",
+ "pll-ddr-other", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun7i_clk, "ir0", ir_parents_sun7i, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun7i_clk, "ir1", ir_parents_sun7i, 0x0b4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char *const audio_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", audio_parents,
+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", audio_parents,
+ 0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", audio_parents,
+ 0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const keypad_parents[] = { "hosc", "losc"};
+static const u8 keypad_table[] = { 0, 2 };
+static struct ccu_mp keypad_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(0, 5),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .mux = _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
+ .common = {
+ .reg = 0x0c4,
+ .hw.init = CLK_HW_INIT_PARENTS("keypad",
+ keypad_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+/*
+ * TODO: SATA clock also supports external clock as parent via BIT(24)
+ * The external clock is probably an optional crystal or oscillator
+ * that can be connected to the SATA-CLKM / SATA-CLKP pins.
+ */
+static SUNXI_CCU_GATE(sata_clk, "sata", "pll-periph-sata",
+ 0x0c8, BIT(31), 0);
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "pll-periph",
+ 0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "pll-periph",
+ 0x0cc, BIT(7), 0);
+static SUNXI_CCU_GATE(usb_phy_clk, "usb-phy", "pll-periph",
+ 0x0cc, BIT(8), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0d4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", audio_parents,
+ 0x0d8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", audio_parents,
+ 0x0dc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk, "dram-csi0", "pll-ddr",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_csi1_clk, "dram-csi1", "pll-ddr",
+ 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "pll-ddr",
+ 0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "pll-ddr",
+ 0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_tve0_clk, "dram-tve0", "pll-ddr",
+ 0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_tve1_clk, "dram-tve1", "pll-ddr",
+ 0x100, BIT(6), 0);
+
+static SUNXI_CCU_GATE(dram_out_clk, "dram-out", "pll-ddr",
+ 0x100, BIT(15), 0);
+static SUNXI_CCU_GATE(dram_de_fe1_clk, "dram-de-fe1", "pll-ddr",
+ 0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_fe0_clk, "dram-de-fe0", "pll-ddr",
+ 0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be0_clk, "dram-de-be0", "pll-ddr",
+ 0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_de_be1_clk, "dram-de-be1", "pll-ddr",
+ 0x100, BIT(27), 0);
+static SUNXI_CCU_GATE(dram_mp_clk, "dram-mp", "pll-ddr",
+ 0x100, BIT(28), 0);
+static SUNXI_CCU_GATE(dram_ace_clk, "dram-ace", "pll-ddr",
+ 0x100, BIT(29), 0);
+
+static const char *const de_parents[] = { "pll-video0", "pll-video1",
+ "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be0_clk, "de-be0", de_parents,
+ 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be1_clk, "de-be1", de_parents,
+ 0x108, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe0_clk, "de-fe0", de_parents,
+ 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe1_clk, "de-fe1", de_parents,
+ 0x110, 0, 4, 24, 2, BIT(31), 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+ 0x114, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_ch0_clk, "tcon0-ch0-sclk", tcon_parents,
+ 0x118, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_ch0_clk, "tcon1-ch0-sclk", tcon_parents,
+ 0x11c, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const csi_isp_parents[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-sata" };
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_isp_clk, "csi-isp",
+ csi_isp_parents,
+ 0x120, 0, 4, 24, 2, BIT(31), 0);
+
+/* TVD clock setup for A10 */
+static const char *const tvd_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tvd_sun4i_clk, "tvd", tvd_parents,
+ 0x128, 24, 1, BIT(31), 0);
+
+/* TVD clock setup for A20 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(tvd_sclk2_sun7i_clk,
+ "tvd-sclk2", tvd_parents,
+ 0x128,
+ 0, 4, /* M */
+ 16, 4, /* P */
+ 8, 1, /* mux */
+ BIT(15), /* gate */
+ 0);
+static SUNXI_CCU_M_WITH_GATE(tvd_sclk1_sun7i_clk, "tvd-sclk1", "tvd-sclk2",
+ 0x128, 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon0_ch1_sclk2_clk, "tcon0-ch1-sclk2",
+ tcon_parents,
+ 0x12c, 0, 4, 24, 2, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon0_ch1_clk,
+ "tcon0-ch1-sclk1", "tcon0-ch1-sclk2",
+ 0x12c, 11, 1, BIT(15),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon1_ch1_sclk2_clk, "tcon1-ch1-sclk2",
+ tcon_parents,
+ 0x130, 0, 4, 24, 2, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon1_ch1_clk,
+ "tcon1-ch1-sclk1", "tcon1-ch1-sclk2",
+ 0x130, 11, 1, BIT(15),
+ CLK_SET_RATE_PARENT);
+
+static const char *const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x"};
+static const u8 csi_table[] = { 0, 1, 2, 5, 6};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi0_clk, "csi0",
+ csi_parents, csi_table,
+ 0x134, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi1_clk, "csi1",
+ csi_parents, csi_table,
+ 0x138, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x13c, 16, 8, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc", 0x144, BIT(31), 0);
+
+static const char *const ace_parents[] = { "pll-ve", "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ace_clk, "ace", ace_parents,
+ 0x148, 0, 4, 24, 1, BIT(31), 0);
+
+static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
+ "pll-vide01", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun4i[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other",
+ "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_sun4i_clk, "gpu", gpu_parents_sun4i,
+ 0x154, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun7i[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-video1",
+ "pll-gpu" };
+static const u8 gpu_table_sun7i[] = { 0, 1, 2, 3, 4 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(gpu_sun7i_clk, "gpu",
+ gpu_parents_sun7i, gpu_table_sun7i,
+ 0x154, 0, 4, 24, 3, BIT(31), 0);
+
+static const char *const mbus_parents[] = { "hosc", "pll-periph-2x",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+ CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(hdmi1_slow_clk, "hdmi1-slow", "hosc", 0x178, BIT(31), 0);
+
+static const char *const hdmi1_parents[] = { "pll-video0", "pll-video1" };
+static const u8 hdmi1_table[] = { 0, 1};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi1_clk, "hdmi1",
+ hdmi1_parents, hdmi1_table,
+ 0x17c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const out_parents[] = { "hosc", "osc32k", "hosc" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(out_a_clk, "out-a", out_parents,
+ 0x1f0, 8, 5, 20, 2, 24, 2, BIT(31), 0);
+static SUNXI_CCU_MP_WITH_MUX_GATE(out_b_clk, "out-b", out_parents,
+ 0x1f4, 8, 5, 20, 2, 24, 2, BIT(31), 0);
+
+static struct ccu_common *sun4i_a10_ccu_clks[] = {
+ &hosc_clk.common,
+ &pll_core_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr_base_clk.common,
+ &pll_ddr_clk.common,
+ &pll_ddr_other_clk.common,
+ &pll_periph_clk.common,
+ &pll_periph_sata_clk.common,
+ &pll_video1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &axi_dram_clk.common,
+ &ahb_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &ahb_otg_clk.common,
+ &ahb_ehci0_clk.common,
+ &ahb_ohci0_clk.common,
+ &ahb_ehci1_clk.common,
+ &ahb_ohci1_clk.common,
+ &ahb_ss_clk.common,
+ &ahb_dma_clk.common,
+ &ahb_bist_clk.common,
+ &ahb_mmc0_clk.common,
+ &ahb_mmc1_clk.common,
+ &ahb_mmc2_clk.common,
+ &ahb_mmc3_clk.common,
+ &ahb_ms_clk.common,
+ &ahb_nand_clk.common,
+ &ahb_sdram_clk.common,
+ &ahb_ace_clk.common,
+ &ahb_emac_clk.common,
+ &ahb_ts_clk.common,
+ &ahb_spi0_clk.common,
+ &ahb_spi1_clk.common,
+ &ahb_spi2_clk.common,
+ &ahb_spi3_clk.common,
+ &ahb_pata_clk.common,
+ &ahb_sata_clk.common,
+ &ahb_gps_clk.common,
+ &ahb_ve_clk.common,
+ &ahb_tvd_clk.common,
+ &ahb_tve0_clk.common,
+ &ahb_tve1_clk.common,
+ &ahb_lcd0_clk.common,
+ &ahb_lcd1_clk.common,
+ &ahb_csi0_clk.common,
+ &ahb_csi1_clk.common,
+ &ahb_hdmi0_clk.common,
+ &ahb_de_be0_clk.common,
+ &ahb_de_be1_clk.common,
+ &ahb_de_fe0_clk.common,
+ &ahb_de_fe1_clk.common,
+ &ahb_mp_clk.common,
+ &ahb_gpu_clk.common,
+ &apb0_codec_clk.common,
+ &apb0_spdif_clk.common,
+ &apb0_ac97_clk.common,
+ &apb0_i2s0_clk.common,
+ &apb0_pio_clk.common,
+ &apb0_ir0_clk.common,
+ &apb0_ir1_clk.common,
+ &apb0_keypad_clk.common,
+ &apb1_i2c0_clk.common,
+ &apb1_i2c1_clk.common,
+ &apb1_i2c2_clk.common,
+ &apb1_can_clk.common,
+ &apb1_scr_clk.common,
+ &apb1_ps20_clk.common,
+ &apb1_ps21_clk.common,
+ &apb1_uart0_clk.common,
+ &apb1_uart1_clk.common,
+ &apb1_uart2_clk.common,
+ &apb1_uart3_clk.common,
+ &apb1_uart4_clk.common,
+ &apb1_uart5_clk.common,
+ &apb1_uart6_clk.common,
+ &apb1_uart7_clk.common,
+ &nand_clk.common,
+ &ms_clk.common,
+ &mmc0_clk.common,
+ &mmc0_output_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc1_clk.common,
+ &mmc1_output_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc2_clk.common,
+ &mmc2_output_clk.common,
+ &mmc2_sample_clk.common,
+ &mmc3_clk.common,
+ &mmc3_output_clk.common,
+ &mmc3_sample_clk.common,
+ &ts_clk.common,
+ &ss_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &pata_clk.common,
+ &ir0_sun4i_clk.common,
+ &ir1_sun4i_clk.common,
+ &i2s0_clk.common,
+ &ac97_clk.common,
+ &spdif_clk.common,
+ &keypad_clk.common,
+ &sata_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_phy_clk.common,
+ &spi3_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi0_clk.common,
+ &dram_csi1_clk.common,
+ &dram_ts_clk.common,
+ &dram_tvd_clk.common,
+ &dram_tve0_clk.common,
+ &dram_tve1_clk.common,
+ &dram_out_clk.common,
+ &dram_de_fe1_clk.common,
+ &dram_de_fe0_clk.common,
+ &dram_de_be0_clk.common,
+ &dram_de_be1_clk.common,
+ &dram_mp_clk.common,
+ &dram_ace_clk.common,
+ &de_mp_clk.common,
+ &csi_isp_clk.common,
+ &tvd_sun4i_clk.common,
+ &tcon0_ch1_sclk2_clk.common,
+ &tcon0_ch1_clk.common,
+ &tcon1_ch1_sclk2_clk.common,
+ &tcon1_ch1_clk.common,
+ &csi0_clk.common,
+ &csi1_clk.common,
+ &ve_clk.common,
+ &codec_clk.common,
+ &avs_clk.common,
+ &ace_clk.common,
+ &hdmi_clk.common,
+ &gpu_sun4i_clk.common,
+};
+
+static struct ccu_common *sun7i_a20_ccu_clks[] = {
+ &hosc_clk.common,
+ &pll_core_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr_base_clk.common,
+ &pll_ddr_clk.common,
+ &pll_ddr_other_clk.common,
+ &pll_periph_clk.common,
+ &pll_periph_sata_clk.common,
+ &pll_video1_clk.common,
+ &pll_gpu_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &ahb_otg_clk.common,
+ &ahb_ehci0_clk.common,
+ &ahb_ohci0_clk.common,
+ &ahb_ehci1_clk.common,
+ &ahb_ohci1_clk.common,
+ &ahb_ss_clk.common,
+ &ahb_dma_clk.common,
+ &ahb_bist_clk.common,
+ &ahb_mmc0_clk.common,
+ &ahb_mmc1_clk.common,
+ &ahb_mmc2_clk.common,
+ &ahb_mmc3_clk.common,
+ &ahb_ms_clk.common,
+ &ahb_nand_clk.common,
+ &ahb_sdram_clk.common,
+ &ahb_ace_clk.common,
+ &ahb_emac_clk.common,
+ &ahb_ts_clk.common,
+ &ahb_spi0_clk.common,
+ &ahb_spi1_clk.common,
+ &ahb_spi2_clk.common,
+ &ahb_spi3_clk.common,
+ &ahb_pata_clk.common,
+ &ahb_sata_clk.common,
+ &ahb_hstimer_clk.common,
+ &ahb_ve_clk.common,
+ &ahb_tvd_clk.common,
+ &ahb_tve0_clk.common,
+ &ahb_tve1_clk.common,
+ &ahb_lcd0_clk.common,
+ &ahb_lcd1_clk.common,
+ &ahb_csi0_clk.common,
+ &ahb_csi1_clk.common,
+ &ahb_hdmi1_clk.common,
+ &ahb_hdmi0_clk.common,
+ &ahb_de_be0_clk.common,
+ &ahb_de_be1_clk.common,
+ &ahb_de_fe0_clk.common,
+ &ahb_de_fe1_clk.common,
+ &ahb_gmac_clk.common,
+ &ahb_mp_clk.common,
+ &ahb_gpu_clk.common,
+ &apb0_codec_clk.common,
+ &apb0_spdif_clk.common,
+ &apb0_ac97_clk.common,
+ &apb0_i2s0_clk.common,
+ &apb0_i2s1_clk.common,
+ &apb0_pio_clk.common,
+ &apb0_ir0_clk.common,
+ &apb0_ir1_clk.common,
+ &apb0_i2s2_clk.common,
+ &apb0_keypad_clk.common,
+ &apb1_i2c0_clk.common,
+ &apb1_i2c1_clk.common,
+ &apb1_i2c2_clk.common,
+ &apb1_i2c3_clk.common,
+ &apb1_can_clk.common,
+ &apb1_scr_clk.common,
+ &apb1_ps20_clk.common,
+ &apb1_ps21_clk.common,
+ &apb1_i2c4_clk.common,
+ &apb1_uart0_clk.common,
+ &apb1_uart1_clk.common,
+ &apb1_uart2_clk.common,
+ &apb1_uart3_clk.common,
+ &apb1_uart4_clk.common,
+ &apb1_uart5_clk.common,
+ &apb1_uart6_clk.common,
+ &apb1_uart7_clk.common,
+ &nand_clk.common,
+ &ms_clk.common,
+ &mmc0_clk.common,
+ &mmc0_output_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc1_clk.common,
+ &mmc1_output_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc2_clk.common,
+ &mmc2_output_clk.common,
+ &mmc2_sample_clk.common,
+ &mmc3_clk.common,
+ &mmc3_output_clk.common,
+ &mmc3_sample_clk.common,
+ &ts_clk.common,
+ &ss_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &pata_clk.common,
+ &ir0_sun7i_clk.common,
+ &ir1_sun7i_clk.common,
+ &i2s0_clk.common,
+ &ac97_clk.common,
+ &spdif_clk.common,
+ &keypad_clk.common,
+ &sata_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_phy_clk.common,
+ &spi3_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi0_clk.common,
+ &dram_csi1_clk.common,
+ &dram_ts_clk.common,
+ &dram_tvd_clk.common,
+ &dram_tve0_clk.common,
+ &dram_tve1_clk.common,
+ &dram_out_clk.common,
+ &dram_de_fe1_clk.common,
+ &dram_de_fe0_clk.common,
+ &dram_de_be0_clk.common,
+ &dram_de_be1_clk.common,
+ &dram_mp_clk.common,
+ &dram_ace_clk.common,
+ &de_be0_clk.common,
+ &de_be1_clk.common,
+ &de_fe0_clk.common,
+ &de_fe1_clk.common,
+ &de_mp_clk.common,
+ &tcon0_ch0_clk.common,
+ &tcon1_ch0_clk.common,
+ &csi_isp_clk.common,
+ &tvd_sclk1_sun7i_clk.common,
+ &tvd_sclk2_sun7i_clk.common,
+ &tcon0_ch1_sclk2_clk.common,
+ &tcon0_ch1_clk.common,
+ &tcon1_ch1_sclk2_clk.common,
+ &tcon1_ch1_clk.common,
+ &csi0_clk.common,
+ &csi1_clk.common,
+ &ve_clk.common,
+ &codec_clk.common,
+ &avs_clk.common,
+ &ace_clk.common,
+ &hdmi_clk.common,
+ &gpu_sun7i_clk.common,
+ &mbus_clk.common,
+ &hdmi1_slow_clk.common,
+ &hdmi1_clk.common,
+ &out_a_clk.common,
+ &out_b_clk.common
+};
+
+/* Post-divider for pll-audio is hardcoded to 4 */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph_2x_clk, "pll-periph-2x",
+ "pll-periph", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+
+static struct clk_hw_onecell_data sun4i_a10_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.common.hw,
+ [CLK_PLL_PERIPH_2X] = &pll_periph_2x_clk.hw,
+ [CLK_PLL_PERIPH_SATA] = &pll_periph_sata_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AXI_DRAM] = &axi_dram_clk.common.hw,
+ [CLK_AHB] = &ahb_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI0] = &ahb_ehci0_clk.common.hw,
+ [CLK_AHB_OHCI0] = &ahb_ohci0_clk.common.hw,
+ [CLK_AHB_EHCI1] = &ahb_ehci1_clk.common.hw,
+ [CLK_AHB_OHCI1] = &ahb_ohci1_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_MMC3] = &ahb_mmc3_clk.common.hw,
+ [CLK_AHB_MS] = &ahb_ms_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_ACE] = &ahb_ace_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_SPI3] = &ahb_spi3_clk.common.hw,
+ [CLK_AHB_PATA] = &ahb_pata_clk.common.hw,
+ [CLK_AHB_SATA] = &ahb_sata_clk.common.hw,
+ [CLK_AHB_GPS] = &ahb_gps_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVD] = &ahb_tvd_clk.common.hw,
+ [CLK_AHB_TVE0] = &ahb_tve0_clk.common.hw,
+ [CLK_AHB_TVE1] = &ahb_tve1_clk.common.hw,
+ [CLK_AHB_LCD0] = &ahb_lcd0_clk.common.hw,
+ [CLK_AHB_LCD1] = &ahb_lcd1_clk.common.hw,
+ [CLK_AHB_CSI0] = &ahb_csi0_clk.common.hw,
+ [CLK_AHB_CSI1] = &ahb_csi1_clk.common.hw,
+ [CLK_AHB_HDMI0] = &ahb_hdmi0_clk.common.hw,
+ [CLK_AHB_DE_BE0] = &ahb_de_be0_clk.common.hw,
+ [CLK_AHB_DE_BE1] = &ahb_de_be1_clk.common.hw,
+ [CLK_AHB_DE_FE0] = &ahb_de_fe0_clk.common.hw,
+ [CLK_AHB_DE_FE1] = &ahb_de_fe1_clk.common.hw,
+ [CLK_AHB_MP] = &ahb_mp_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_SPDIF] = &apb0_spdif_clk.common.hw,
+ [CLK_APB0_AC97] = &apb0_ac97_clk.common.hw,
+ [CLK_APB0_I2S0] = &apb0_i2s0_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR0] = &apb0_ir0_clk.common.hw,
+ [CLK_APB0_IR1] = &apb0_ir1_clk.common.hw,
+ [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_CAN] = &apb1_can_clk.common.hw,
+ [CLK_APB1_SCR] = &apb1_scr_clk.common.hw,
+ [CLK_APB1_PS20] = &apb1_ps20_clk.common.hw,
+ [CLK_APB1_PS21] = &apb1_ps21_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_APB1_UART4] = &apb1_uart4_clk.common.hw,
+ [CLK_APB1_UART5] = &apb1_uart5_clk.common.hw,
+ [CLK_APB1_UART6] = &apb1_uart6_clk.common.hw,
+ [CLK_APB1_UART7] = &apb1_uart7_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MS] = &ms_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
+ [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_MMC3_OUTPUT] = &mmc3_output_clk.common.hw,
+ [CLK_MMC3_SAMPLE] = &mmc3_sample_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_PATA] = &pata_clk.common.hw,
+ [CLK_IR0] = &ir0_sun4i_clk.common.hw,
+ [CLK_IR1] = &ir1_sun4i_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_PHY] = &usb_phy_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_TVE0] = &dram_tve0_clk.common.hw,
+ [CLK_DRAM_TVE1] = &dram_tve1_clk.common.hw,
+ [CLK_DRAM_OUT] = &dram_out_clk.common.hw,
+ [CLK_DRAM_DE_FE1] = &dram_de_fe1_clk.common.hw,
+ [CLK_DRAM_DE_FE0] = &dram_de_fe0_clk.common.hw,
+ [CLK_DRAM_DE_BE0] = &dram_de_be0_clk.common.hw,
+ [CLK_DRAM_DE_BE1] = &dram_de_be1_clk.common.hw,
+ [CLK_DRAM_MP] = &dram_mp_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DE_BE0] = &de_be0_clk.common.hw,
+ [CLK_DE_BE1] = &de_be1_clk.common.hw,
+ [CLK_DE_FE0] = &de_fe0_clk.common.hw,
+ [CLK_DE_FE1] = &de_fe1_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0_CH0] = &tcon0_ch0_clk.common.hw,
+ [CLK_TCON1_CH0] = &tcon1_ch0_clk.common.hw,
+ [CLK_CSI_ISP] = &csi_isp_clk.common.hw,
+ [CLK_TVD] = &tvd_sun4i_clk.common.hw,
+ [CLK_TCON0_CH1_SCLK2] = &tcon0_ch1_sclk2_clk.common.hw,
+ [CLK_TCON0_CH1] = &tcon0_ch1_clk.common.hw,
+ [CLK_TCON1_CH1_SCLK2] = &tcon1_ch1_sclk2_clk.common.hw,
+ [CLK_TCON1_CH1] = &tcon1_ch1_clk.common.hw,
+ [CLK_CSI0] = &csi0_clk.common.hw,
+ [CLK_CSI1] = &csi1_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_ACE] = &ace_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_GPU] = &gpu_sun7i_clk.common.hw,
+ },
+ .num = CLK_NUMBER_SUN4I,
+};
+static struct clk_hw_onecell_data sun7i_a20_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.common.hw,
+ [CLK_PLL_PERIPH_2X] = &pll_periph_2x_clk.hw,
+ [CLK_PLL_PERIPH_SATA] = &pll_periph_sata_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB] = &ahb_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI0] = &ahb_ehci0_clk.common.hw,
+ [CLK_AHB_OHCI0] = &ahb_ohci0_clk.common.hw,
+ [CLK_AHB_EHCI1] = &ahb_ehci1_clk.common.hw,
+ [CLK_AHB_OHCI1] = &ahb_ohci1_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_MMC3] = &ahb_mmc3_clk.common.hw,
+ [CLK_AHB_MS] = &ahb_ms_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_ACE] = &ahb_ace_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_SPI3] = &ahb_spi3_clk.common.hw,
+ [CLK_AHB_PATA] = &ahb_pata_clk.common.hw,
+ [CLK_AHB_SATA] = &ahb_sata_clk.common.hw,
+ [CLK_AHB_HSTIMER] = &ahb_hstimer_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVD] = &ahb_tvd_clk.common.hw,
+ [CLK_AHB_TVE0] = &ahb_tve0_clk.common.hw,
+ [CLK_AHB_TVE1] = &ahb_tve1_clk.common.hw,
+ [CLK_AHB_LCD0] = &ahb_lcd0_clk.common.hw,
+ [CLK_AHB_LCD1] = &ahb_lcd1_clk.common.hw,
+ [CLK_AHB_CSI0] = &ahb_csi0_clk.common.hw,
+ [CLK_AHB_CSI1] = &ahb_csi1_clk.common.hw,
+ [CLK_AHB_HDMI1] = &ahb_hdmi1_clk.common.hw,
+ [CLK_AHB_HDMI0] = &ahb_hdmi0_clk.common.hw,
+ [CLK_AHB_DE_BE0] = &ahb_de_be0_clk.common.hw,
+ [CLK_AHB_DE_BE1] = &ahb_de_be1_clk.common.hw,
+ [CLK_AHB_DE_FE0] = &ahb_de_fe0_clk.common.hw,
+ [CLK_AHB_DE_FE1] = &ahb_de_fe1_clk.common.hw,
+ [CLK_AHB_GMAC] = &ahb_gmac_clk.common.hw,
+ [CLK_AHB_MP] = &ahb_mp_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_SPDIF] = &apb0_spdif_clk.common.hw,
+ [CLK_APB0_AC97] = &apb0_ac97_clk.common.hw,
+ [CLK_APB0_I2S0] = &apb0_i2s0_clk.common.hw,
+ [CLK_APB0_I2S1] = &apb0_i2s1_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR0] = &apb0_ir0_clk.common.hw,
+ [CLK_APB0_IR1] = &apb0_ir1_clk.common.hw,
+ [CLK_APB0_I2S2] = &apb0_i2s2_clk.common.hw,
+ [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_I2C3] = &apb1_i2c3_clk.common.hw,
+ [CLK_APB1_CAN] = &apb1_can_clk.common.hw,
+ [CLK_APB1_SCR] = &apb1_scr_clk.common.hw,
+ [CLK_APB1_PS20] = &apb1_ps20_clk.common.hw,
+ [CLK_APB1_PS21] = &apb1_ps21_clk.common.hw,
+ [CLK_APB1_I2C4] = &apb1_i2c4_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_APB1_UART4] = &apb1_uart4_clk.common.hw,
+ [CLK_APB1_UART5] = &apb1_uart5_clk.common.hw,
+ [CLK_APB1_UART6] = &apb1_uart6_clk.common.hw,
+ [CLK_APB1_UART7] = &apb1_uart7_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MS] = &ms_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
+ [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_MMC3_OUTPUT] = &mmc3_output_clk.common.hw,
+ [CLK_MMC3_SAMPLE] = &mmc3_sample_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_PATA] = &pata_clk.common.hw,
+ [CLK_IR0] = &ir0_sun7i_clk.common.hw,
+ [CLK_IR1] = &ir1_sun7i_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_PHY] = &usb_phy_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_TVE0] = &dram_tve0_clk.common.hw,
+ [CLK_DRAM_TVE1] = &dram_tve1_clk.common.hw,
+ [CLK_DRAM_OUT] = &dram_out_clk.common.hw,
+ [CLK_DRAM_DE_FE1] = &dram_de_fe1_clk.common.hw,
+ [CLK_DRAM_DE_FE0] = &dram_de_fe0_clk.common.hw,
+ [CLK_DRAM_DE_BE0] = &dram_de_be0_clk.common.hw,
+ [CLK_DRAM_DE_BE1] = &dram_de_be1_clk.common.hw,
+ [CLK_DRAM_MP] = &dram_mp_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DE_BE0] = &de_be0_clk.common.hw,
+ [CLK_DE_BE1] = &de_be1_clk.common.hw,
+ [CLK_DE_FE0] = &de_fe0_clk.common.hw,
+ [CLK_DE_FE1] = &de_fe1_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0_CH0] = &tcon0_ch0_clk.common.hw,
+ [CLK_TCON1_CH0] = &tcon1_ch0_clk.common.hw,
+ [CLK_CSI_ISP] = &csi_isp_clk.common.hw,
+ [CLK_TVD_SCLK2] = &tvd_sclk2_sun7i_clk.common.hw,
+ [CLK_TVD] = &tvd_sclk1_sun7i_clk.common.hw,
+ [CLK_TCON0_CH1_SCLK2] = &tcon0_ch1_sclk2_clk.common.hw,
+ [CLK_TCON0_CH1] = &tcon0_ch1_clk.common.hw,
+ [CLK_TCON1_CH1_SCLK2] = &tcon1_ch1_sclk2_clk.common.hw,
+ [CLK_TCON1_CH1] = &tcon1_ch1_clk.common.hw,
+ [CLK_CSI0] = &csi0_clk.common.hw,
+ [CLK_CSI1] = &csi1_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_ACE] = &ace_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_GPU] = &gpu_sun7i_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_HDMI1_SLOW] = &hdmi1_slow_clk.common.hw,
+ [CLK_HDMI1] = &hdmi1_clk.common.hw,
+ [CLK_OUT_A] = &out_a_clk.common.hw,
+ [CLK_OUT_B] = &out_b_clk.common.hw,
+ },
+ .num = CLK_NUMBER_SUN7I,
+};
+
+static struct ccu_reset_map sun4i_a10_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_DE_BE0] = { 0x104, BIT(30) },
+ [RST_DE_BE1] = { 0x108, BIT(30) },
+ [RST_DE_FE0] = { 0x10c, BIT(30) },
+ [RST_DE_FE1] = { 0x110, BIT(30) },
+ [RST_DE_MP] = { 0x114, BIT(30) },
+ [RST_TCON0] = { 0x118, BIT(30) },
+ [RST_TCON1] = { 0x11c, BIT(30) },
+ [RST_CSI0] = { 0x134, BIT(30) },
+ [RST_CSI1] = { 0x138, BIT(30) },
+ [RST_VE] = { 0x13c, BIT(0) },
+ [RST_ACE] = { 0x148, BIT(16) },
+ [RST_LVDS] = { 0x14c, BIT(0) },
+ [RST_GPU] = { 0x154, BIT(30) },
+};
+
+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_DE_BE0] = { 0x104, BIT(30) },
+ [RST_DE_BE1] = { 0x108, BIT(30) },
+ [RST_DE_FE0] = { 0x10c, BIT(30) },
+ [RST_DE_FE1] = { 0x110, BIT(30) },
+ [RST_DE_MP] = { 0x114, BIT(30) },
+ [RST_TCON0] = { 0x118, BIT(30) },
+ [RST_TCON1] = { 0x11c, BIT(30) },
+ [RST_CSI0] = { 0x134, BIT(30) },
+ [RST_CSI1] = { 0x138, BIT(30) },
+ [RST_VE] = { 0x13c, BIT(0) },
+ [RST_ACE] = { 0x148, BIT(16) },
+ [RST_LVDS] = { 0x14c, BIT(0) },
+ [RST_GPU] = { 0x154, BIT(30) },
+ [RST_HDMI_H] = { 0x170, BIT(0) },
+ [RST_HDMI_SYS] = { 0x170, BIT(1) },
+ [RST_HDMI_AUDIO_DMA] = { 0x170, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun4i_a10_ccu_desc = {
+ .ccu_clks = sun4i_a10_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun4i_a10_ccu_clks),
+
+ .hw_clks = &sun4i_a10_hw_clks,
+
+ .resets = sun4i_a10_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun4i_a10_ccu_resets),
+};
+
+static const struct sunxi_ccu_desc sun7i_a20_ccu_desc = {
+ .ccu_clks = sun7i_a20_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun7i_a20_ccu_clks),
+
+ .hw_clks = &sun7i_a20_hw_clks,
+
+ .resets = sun7i_a20_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun7i_a20_ccu_resets),
+};
+
+static void init_clocks(void __iomem *reg)
+{
+ u32 val;
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN4I_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN4I_PLL_AUDIO_REG);
+
+ /* Use PLL6 as parent for AHB */
+ val = readl(reg + SUN4I_AHB_REG);
+ val &= ~GENMASK(7, 6);
+ writel(val | (2 << 6), reg + SUN4I_AHB_REG);
+}
+
+static void __init sun4i_a10_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ init_clocks(reg);
+
+ sunxi_ccu_probe(node, reg, &sun4i_a10_ccu_desc);
+}
+
+static void __init sun7i_a20_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ init_clocks(reg);
+
+ sunxi_ccu_probe(node, reg, &sun7i_a20_ccu_desc);
+}
+
+CLK_OF_DECLARE(sun4i_a10_ccu, "allwinner,sun4i-a10-ccu",
+ sun4i_a10_ccu_setup);
+CLK_OF_DECLARE(sun7i_a20_ccu, "allwinner,sun7i-a20-ccu",
+ sun7i_a20_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.h b/drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.h
new file mode 100644
index 0000000..bca224d
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sunxi-a10-a20.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Priit Laes
+ *
+ * Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUNXI_A10_A20_H_
+#define _CCU_SUNXI_A10_A20_H_
+
+#include <dt-bindings/clock/sunxi-a10-a20-ccu.h>
+#include <dt-bindings/reset/sunxi-a10-a20-ccu.h>
+
+/* The HOSC is exported */
+#define CLK_PLL_CORE 2
+#define CLK_PLL_AUDIO_BASE 3
+#define CLK_PLL_AUDIO 4
+#define CLK_PLL_AUDIO_2X 5
+#define CLK_PLL_AUDIO_4X 6
+#define CLK_PLL_AUDIO_8X 7
+#define CLK_PLL_VIDEO0 8
+#define CLK_PLL_VIDEO0_2X 9
+#define CLK_PLL_VE 10
+#define CLK_PLL_DDR_BASE 11
+#define CLK_PLL_DDR 12
+#define CLK_PLL_DDR_OTHER 13
+#define CLK_PLL_PERIPH 14
+#define CLK_PLL_PERIPH_2X 15
+#define CLK_PLL_VIDEO1 17
+#define CLK_PLL_VIDEO1_2X 18
+#define CLK_PLL_GPU 19
+
+/* The CPU clock is exported */
+#define CLK_AXI 21
+#define CLK_AXI_DRAM 22
+#define CLK_AHB 23
+#define CLK_APB0 24
+#define CLK_APB1 25
+
+/* AHB gates are exported (23..68) */
+/* APB0 gates are exported (69..78) */
+/* APB1 gates are exported (79..95) */
+/* IP module clocks are exported (96..128) */
+/* DRAM gates are exported (129..142)*/
+/* Media (display engine clocks & etc) are exported (143..169) */
+
+#define CLK_NUMBER_SUN4I (CLK_GPU + 1)
+#define CLK_NUMBER_SUN7I (CLK_OUT_B + 1)
+
+#endif /* _CCU_SUNXI_A10_A20_H_ */
diff --git a/include/dt-bindings/clock/sunxi-a10-a20-ccu.h b/include/dt-bindings/clock/sunxi-a10-a20-ccu.h
new file mode 100644
index 0000000..364ccbe
--- /dev/null
+++ b/include/dt-bindings/clock/sunxi-a10-a20-ccu.h
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUNXI_A10_A20_H_
+#define _DT_BINDINGS_CLK_SUNXI_A10_A20_H_
+
+#define CLK_HOSC 1
+#define CLK_PLL_PERIPH_SATA 16
+#define CLK_CPU 20
+
+/* AHB Gates */
+#define CLK_AHB_OTG 26
+#define CLK_AHB_EHCI0 27
+#define CLK_AHB_OHCI0 28
+#define CLK_AHB_EHCI1 29
+#define CLK_AHB_OHCI1 30
+#define CLK_AHB_SS 31
+#define CLK_AHB_DMA 32
+#define CLK_AHB_BIST 33
+#define CLK_AHB_MMC0 34
+#define CLK_AHB_MMC1 35
+#define CLK_AHB_MMC2 36
+#define CLK_AHB_MMC3 37
+#define CLK_AHB_MS 38
+#define CLK_AHB_NAND 39
+#define CLK_AHB_SDRAM 40
+#define CLK_AHB_ACE 41
+#define CLK_AHB_EMAC 42
+#define CLK_AHB_TS 43
+#define CLK_AHB_SPI0 44
+#define CLK_AHB_SPI1 45
+#define CLK_AHB_SPI2 46
+#define CLK_AHB_SPI3 47
+#define CLK_AHB_PATA 48
+#define CLK_AHB_SATA 49
+#define CLK_AHB_GPS 50
+#define CLK_AHB_HSTIMER 51
+#define CLK_AHB_VE 52
+#define CLK_AHB_TVD 53
+#define CLK_AHB_TVE0 54
+#define CLK_AHB_TVE1 55
+#define CLK_AHB_LCD0 56
+#define CLK_AHB_LCD1 57
+#define CLK_AHB_CSI0 58
+#define CLK_AHB_CSI1 59
+#define CLK_AHB_HDMI0 60
+#define CLK_AHB_HDMI1 61
+#define CLK_AHB_DE_BE0 62
+#define CLK_AHB_DE_BE1 63
+#define CLK_AHB_DE_FE0 64
+#define CLK_AHB_DE_FE1 65
+#define CLK_AHB_GMAC 66
+#define CLK_AHB_MP 67
+#define CLK_AHB_GPU 68
+
+/* APB0 Gates */
+#define CLK_APB0_CODEC 69
+#define CLK_APB0_SPDIF 70
+#define CLK_APB0_I2S0 71
+#define CLK_APB0_AC97 72
+#define CLK_APB0_I2S1 73
+#define CLK_APB0_PIO 74
+#define CLK_APB0_IR0 75
+#define CLK_APB0_IR1 76
+#define CLK_APB0_I2S2 77
+#define CLK_APB0_KEYPAD 78
+
+/* APB1 Gates */
+#define CLK_APB1_I2C0 79
+#define CLK_APB1_I2C1 80
+#define CLK_APB1_I2C2 81
+#define CLK_APB1_I2C3 82
+#define CLK_APB1_CAN 83
+#define CLK_APB1_SCR 84
+#define CLK_APB1_PS20 85
+#define CLK_APB1_PS21 86
+#define CLK_APB1_I2C4 87
+#define CLK_APB1_UART0 88
+#define CLK_APB1_UART1 89
+#define CLK_APB1_UART2 90
+#define CLK_APB1_UART3 91
+#define CLK_APB1_UART4 92
+#define CLK_APB1_UART5 93
+#define CLK_APB1_UART6 94
+#define CLK_APB1_UART7 95
+
+/* IP clocks */
+#define CLK_NAND 96
+#define CLK_MS 97
+#define CLK_MMC0 98
+#define CLK_MMC0_OUTPUT 99
+#define CLK_MMC0_SAMPLE 100
+#define CLK_MMC1 101
+#define CLK_MMC1_OUTPUT 102
+#define CLK_MMC1_SAMPLE 103
+#define CLK_MMC2 104
+#define CLK_MMC2_OUTPUT 105
+#define CLK_MMC2_SAMPLE 106
+#define CLK_MMC3 107
+#define CLK_MMC3_OUTPUT 108
+#define CLK_MMC3_SAMPLE 109
+#define CLK_TS 110
+#define CLK_SS 111
+#define CLK_SPI0 112
+#define CLK_SPI1 113
+#define CLK_SPI2 114
+#define CLK_PATA 115
+#define CLK_IR0 116
+#define CLK_IR1 117
+#define CLK_I2S0 118
+#define CLK_AC97 119
+#define CLK_SPDIF 120
+#define CLK_KEYPAD 121
+#define CLK_SATA 122
+#define CLK_USB_OHCI0 123
+#define CLK_USB_OHCI1 124
+#define CLK_USB_PHY 125
+#define CLK_SPI3 126
+#define CLK_I2S1 127
+#define CLK_I2S2 128
+
+/* DRAM Gates */
+#define CLK_DRAM_VE 129
+#define CLK_DRAM_CSI0 130
+#define CLK_DRAM_CSI1 131
+#define CLK_DRAM_TS 132
+#define CLK_DRAM_TVD 133
+#define CLK_DRAM_TVE0 134
+#define CLK_DRAM_TVE1 135
+#define CLK_DRAM_OUT 136
+#define CLK_DRAM_DE_FE1 137
+#define CLK_DRAM_DE_FE0 138
+#define CLK_DRAM_DE_BE0 139
+#define CLK_DRAM_DE_BE1 140
+#define CLK_DRAM_MP 141
+#define CLK_DRAM_ACE 142
+
+/* Display Engine Clocks */
+#define CLK_DE_BE0 143
+#define CLK_DE_BE1 144
+#define CLK_DE_FE0 145
+#define CLK_DE_FE1 146
+#define CLK_DE_MP 147
+#define CLK_TCON0_CH0 148
+#define CLK_TCON1_CH0 149
+#define CLK_CSI_ISP 150
+#define CLK_TVD_SCLK2 151
+#define CLK_TVD 152
+#define CLK_TCON0_CH1_SCLK2 153
+#define CLK_TCON0_CH1 154
+#define CLK_TCON1_CH1_SCLK2 155
+#define CLK_TCON1_CH1 156
+#define CLK_CSI0 157
+#define CLK_CSI1 158
+#define CLK_CODEC 159
+#define CLK_VE 160
+#define CLK_AVS 161
+#define CLK_ACE 162
+#define CLK_HDMI 163
+#define CLK_GPU 164
+
+/* Following only exist on sun7i-a20 */
+#define CLK_MBUS 165
+#define CLK_HDMI1_SLOW 166
+#define CLK_HDMI1 167
+#define CLK_OUT_A 168
+#define CLK_OUT_B 169
+
+#endif /* _DT_BINDINGS_CLK_SUNXI_A10_A20_H_ */
diff --git a/include/dt-bindings/reset/sunxi-a10-a20-ccu.h b/include/dt-bindings/reset/sunxi-a10-a20-ccu.h
new file mode 100644
index 0000000..9845cee
--- /dev/null
+++ b/include/dt-bindings/reset/sunxi-a10-a20-ccu.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUNXI_A10_A10_H
+#define _DT_BINDINGS_RST_SUNXI_A10_A10_H
+
+#define RST_USB_PHY0 1
+#define RST_USB_PHY1 2
+#define RST_USB_PHY2 3
+#define RST_DE_BE0 4
+#define RST_DE_BE1 5
+#define RST_DE_FE0 6
+#define RST_DE_FE1 7
+#define RST_DE_MP 8
+#define RST_TCON0 9
+#define RST_TCON1 10
+#define RST_CSI0 11
+#define RST_CSI1 12
+#define RST_VE 13
+#define RST_ACE 14
+#define RST_LVDS 15
+#define RST_GPU 16
+#define RST_HDMI_H 17
+#define RST_HDMI_SYS 18
+#define RST_HDMI_AUDIO_DMA 19
+
+#endif /* DT_BINDINGS_RST_SUNXI_A10_A10_H */
--
git-series 0.9.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox