* [PATCH 3/3] dt-bindings: Document Phytec phyCORE-RK3288 RDK
From: Wadim Egorov @ 2017-04-03 10:23 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
heiko-4mtYJXux2i+zQB+pC5nmwQ, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <1491214985-18331-1-git-send-email-w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Add documentation for the PCM-947 carrier board, a RK3288 based
development board made by PHYTEC.
Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
---
Documentation/devicetree/bindings/arm/rockchip.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index cc4ace6..e079a62 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -103,6 +103,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "mqmaker,miqi", "rockchip,rk3288";
+- Phytec phyCORE-RK3288: Rapid Development Kit
+ Required root node properties:
+ - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
- Rockchip PX3 Evaluation board:
Required root node properties:
- compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH 2/3] ARM: dts: rockchip: Add support for PCM-947 carrier board
From: Wadim Egorov @ 2017-04-03 10:23 UTC (permalink / raw)
To: robh+dt, mark.rutland, heiko, linux, devicetree, linux-arm-kernel,
linux-rockchip, linux-kernel
In-Reply-To: <1491214985-18331-1-git-send-email-w.egorov@phytec.de>
Add basic support for the PCM-947 carrier board, a RK3288 based development
board made by PHYTEC. This board works in a combination with
the phyCORE-RK3288 System on Module.
Following interfaces and devices are available on the PCM-947 carrier board:
- 2x UART
- micro SDMMC
- USB host and USB otg
- USB 3503 HSIC hub
- Ethernet
- 2nd alternative KSZ9031 ethernet phy
- Display connectors: PHYTEC LVDS, DDG LVDS, parallel signals, HDMI
- Parallel Camera CIF
- SGTL5000-32QFN audio codec
- 4x LEDs connected via PCA9533
- 2 user buttons
- Expansion connectors for WiFi and other modules
- RTC RV-4162-C7
- Resistive touch STMPE811
- EEPROM M24C32
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk3288-phycore-rdk.dts | 263 +++++++++++++++++++++++++++++++
2 files changed, 264 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3288-phycore-rdk.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..8c3cb4d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -692,6 +692,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-firefly.dtb \
rk3288-firefly-reload.dtb \
rk3288-miqi.dtb \
+ rk3288-phycore-rdk.dtb \
rk3288-popmetal.dtb \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
new file mode 100644
index 0000000..16a2b96
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include "rk3288-phycore-som.dtsi"
+
+/ {
+ model = "Phytec RK3288 PCM-947";
+ compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
+ user_buttons: user-buttons {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_button_pins>;
+
+ button@0 {
+ label = "home";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+
+ button@1 {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+ };
+
+ vcc_host0_5v: usb-host0-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host0_vbus_drv>;
+ regulator-name = "vcc_host0_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vdd_in_otg_out>;
+ };
+
+ vcc_host1_5v: usb-host1-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host1_vbus_drv>;
+ regulator-name = "vcc_host1_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vdd_in_otg_out>;
+ };
+
+ vcc_otg_5v: usb-otg-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc_otg_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vdd_in_otg_out>;
+ };
+};
+
+&gmac {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ stmpe@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ };
+
+ adc@64 {
+ compatible = "maxim,max1037";
+ reg = <0x64>;
+ };
+
+ i2c_rtc: rtc@68 {
+ compatible = "rv4162";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_rtc_int>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <10 0>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c_eeprom_cb: eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* PCA9533 - 4-bit LED dimmer */
+ leddim: leddimmer@62 {
+ compatible = "nxp,pca9533";
+ reg = <0x62>;
+
+ led1 {
+ label = "red:user1";
+ linux,default-trigger = "none";
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led2 {
+ label = "green:user2";
+ linux,default-trigger = "none";
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led3 {
+ label = "blue:user3";
+ linux,default-trigger = "none";
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led4 {
+ label = "red:user4";
+ linux,default-trigger = "none";
+ type = <PCA9532_TYPE_LED>;
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+ bias-pull-up;
+ drive-strength = <12>;
+ };
+
+ buttons {
+ user_button_pins: user-button-pins {
+ /* button 1 */
+ rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* button 2 */
+ <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ rv4162 {
+ i2c_rtc_int: i2c-rtc-int {
+ rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ /*
+ * Default drive strength isn't enough to achieve even
+ * high-speed mode on pcm-947 board so bump up to 12 mA.
+ */
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+ };
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ touchscreen {
+ ts_irq_pin: ts-irq-pin {
+ rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_host {
+ host0_vbus_drv: host0-vbus-drv {
+ rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ host1_vbus_drv: host1-vbus-drv {
+ rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_otg {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vdd_io_sd>;
+ vqmmc-supply = <&vdd_io_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related
* [PATCH 1/3] ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM
From: Wadim Egorov @ 2017-04-03 10:23 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
heiko-4mtYJXux2i+zQB+pC5nmwQ, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC.
The module can be connected to different carrier boards.
It can be also equipped with different RAM, SPI flash and eMMC variants.
The Rapid Development Kit option is using the following setup:
- 1 GB DDR3 RAM (2 Banks)
- 1x 4 KB EEPROM
- DP83867 Gigabit Ethernet PHY
- 16 MB SPI Flash
- 4 GB eMMC Flash
Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
---
arch/arm/boot/dts/rk3288-phycore-som.dtsi | 463 ++++++++++++++++++++++++++++++
1 file changed, 463 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3288-phycore-som.dtsi
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
new file mode 100644
index 0000000..36e690e
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -0,0 +1,463 @@
+/*
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "rk3288.dtsi"
+
+/ {
+ model = "Phytec RK3288 phyCORE";
+ compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
+ /*
+ * Set the minimum memory size here and
+ * let the bootloader set the real size.
+ */
+ memory {
+ device_type = "memory";
+ reg = <0 0x8000000>;
+ };
+
+ aliases {
+ rtc0 = &i2c_rtc;
+ rtc1 = &rk818;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ leds: user-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led>;
+
+ user {
+ label = "green_led";
+ gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "keep";
+ };
+ };
+
+ vdd_emmc_io: vdd-emmc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_emmc_io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vdd_3v3_io>;
+ };
+
+ vdd_in_otg_out: vdd-in-otg-out {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_in_otg_out";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vdd_misc_1v8: vdd-misc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_misc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+ operating-points = <
+ /* KHz uV */
+ 1800000 1400000
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+};
+
+&emmc {
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ vmmc-supply = <&vdd_3v3_io>;
+ vqmmc-supply = <&vdd_emmc_io>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins &phy_rst &phy_int>;
+ phy-supply = <&vdd_eth_2v5>;
+ phy-mode = "rgmii-id";
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ tx_delay = <0x0>;
+ rx_delay = <0x0>;
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ enet-phy-lane-no-swap;
+ };
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+};
+
+&io_domains {
+ rockchip,grf = <&grf>;
+ sdcard-supply = <&vdd_io_sd>;
+ flash0-supply = <&vdd_emmc_io>;
+ flash1-supply = <&vdd_misc_1v8>;
+ gpio1830-supply = <&vdd_3v3_io>;
+ gpio30-supply = <&vdd_3v3_io>;
+ bb-supply = <&vdd_3v3_io>;
+ dvp-supply = <&vdd_3v3_io>;
+ lcdc-supply = <&vdd_3v3_io>;
+ wifi-supply = <&vdd_3v3_io>;
+ audio-supply = <&vdd_3v3_io>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rk818: pmic@1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ vcc1-supply = <&vdd_sys>;
+ vcc2-supply = <&vdd_sys>;
+ vcc3-supply = <&vdd_sys>;
+ vcc4-supply = <&vdd_sys>;
+ boost-supply = <&vdd_in_otg_out>;
+ vcc6-supply = <&vdd_sys>;
+ vcc7-supply = <&vdd_misc_1v8>;
+ vcc8-supply = <&vdd_misc_1v8>;
+ vcc9-supply = <&vdd_3v3_io>;
+ vddio-supply = <&vdd_3v3_io>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_3v3_io: DCDC_REG4 {
+ regulator-name = "vdd_3v3_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd_sys: DCDC_BOOST {
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <5000000>;
+ };
+ };
+
+ /* vcc9 */
+ vdd_sd: SWITCH_REG {
+ regulator-name = "vdd_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ /* vcc6 */
+ vdd_eth_2v5: LDO_REG2 {
+ regulator-name = "vdd_eth_2v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2500000>;
+ };
+ };
+
+ /* vcc7 */
+ vdd_1v0: LDO_REG3 {
+ regulator-name = "vdd_1v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ /* vcc8 */
+ vdd_1v8_lcd_ldo: LDO_REG4 {
+ regulator-name = "vdd_1v8_lcd_ldo";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ /* vcc8 */
+ vdd_1v0_lcd: LDO_REG6 {
+ regulator-name = "vdd_1v0_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ /* vcc7 */
+ vdd_1v8_ldo: LDO_REG7 {
+ regulator-name = "vdd_1v8_ldo";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ /* vcc9 */
+ vdd_io_sd: LDO_REG9 {
+ regulator-name = "vdd_io_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+ };
+ };
+
+ /* M24C32-D */
+ i2c_eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ vdd_cpu: fan53555@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <300>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1430000>;
+ regulator-ramp-delay = <8000>;
+ vin-supply = <&vdd_sys>;
+ };
+};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ emmc {
+ /*
+ * We run eMMC at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ emmc_clk: emmc-clk {
+ rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 2 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 3 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 4 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 5 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 6 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <3 7 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ };
+ };
+
+ gmac {
+ phy_int: phy-int {
+ rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rst: phy-rst {
+ rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ leds {
+ user_led: user-led {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ /* Pin for switching state between sleep and non-sleep state */
+ pmic_sleep: pmic-sleep {
+ rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vdd_1v8_ldo>;
+};
+
+&spi2 {
+ status = "okay";
+
+ serial_flash: m25p80@0 {
+ compatible = "micron,n25q128a13", "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "okay";
+ };
+};
+
+&tsadc {
+ status = "okay";
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers
From: Paul Cercueil @ 2017-04-03 10:20 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Linus Walleij, Alexandre Courbot, Rob Herring, Mark Rutland,
Ralf Baechle, Boris Brezillon, Thierry Reding,
Bartlomiej Zolnierkiewicz, Maarten ter Huurne, Lars-Peter Clausen,
Paul Burton, james.hogan-1AXoQHu6uovQT0dZR+AlfA,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mips-6z/3iImG2C8G8FEW9MqTrA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-pwm-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <48f7f4ee-b8e3-0096-ddea-2fbe0b399b40-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Hi,
Le 2017-04-03 11:57, Sergei Shtylyov a écrit :
> Hello!
>
> On 4/2/2017 11:42 PM, Paul Cercueil wrote:
>
>> For a description of the pinctrl devicetree node, please read
>> Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
>>
>> For a description of the gpio devicetree nodes, please read
>> Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
>>
>> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> [...]
>
>> diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi
>> b/arch/mips/boot/dts/ingenic/jz4740.dtsi
>> index 3e1587f1f77a..9c23c877fc34 100644
>> --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
>> +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
>> @@ -55,6 +55,67 @@
>> clock-names = "rtc";
>> };
>>
>> + pinctrl: ingenic-pinctrl@10010000 {
>
> The node name should be generic, so please rename it to something
> like "pin-controller@..."
OK.
>> + compatible = "ingenic,jz4740-pinctrl";
>> + reg = <0x10010000 0x400>;
>> +
>> + gpa: gpio-controller@0 {
>
> The name should be just "gpio@0", according to ePAPR and its
> successor spec. Although, using the <unit-address> without the "reg"
> prop isn't allowed either...
ePAPR says: "If the node has no reg property, the unit-address may be
omitted if the node name alone differentiates the node from other nodes
at
the same level in the tree."
I could use 'gpio@bank-a', it is allowed by the spec. Or do you prefer
'gpio@0'?
> MBR, Sergei
I'll wait from some feedback on the other patches then send a v5.
Thanks,
-Paul
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH] ARM: dts: r7s72100: fix ethernet clock parent
From: Simon Horman @ 2017-04-03 10:17 UTC (permalink / raw)
To: Chris Brandt
Cc: Rob Herring, Mark Rutland, Geert Uytterhoeven, devicetree,
linux-renesas-soc
In-Reply-To: <20170330211609.598-1-chris.brandt@renesas.com>
On Thu, Mar 30, 2017 at 02:16:09PM -0700, Chris Brandt wrote:
> Technically, the Ethernet block is run off the 133MHz Bus (B) clock, not
> the 33MHz Peripheral 0 (P0) clock.
>
> Fixes: 969244f9c720 ("ARM: dts: r7s72100: add ethernet clock to device tree")
> Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Thanks, I have queued this up.
^ permalink raw reply
* Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers
From: Sergei Shtylyov @ 2017-04-03 9:57 UTC (permalink / raw)
To: Paul Cercueil, Linus Walleij, Alexandre Courbot, Rob Herring,
Mark Rutland, Ralf Baechle
Cc: Boris Brezillon, Thierry Reding, Bartlomiej Zolnierkiewicz,
Maarten ter Huurne, Lars-Peter Clausen, Paul Burton, james.hogan,
linux-gpio, devicetree, linux-kernel, linux-mips, linux-mmc,
linux-mtd, linux-pwm, linux-fbdev
In-Reply-To: <20170402204244.14216-7-paul@crapouillou.net>
Hello!
On 4/2/2017 11:42 PM, Paul Cercueil wrote:
> For a description of the pinctrl devicetree node, please read
> Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
>
> For a description of the gpio devicetree nodes, please read
> Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[...]
> diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> index 3e1587f1f77a..9c23c877fc34 100644
> --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> @@ -55,6 +55,67 @@
> clock-names = "rtc";
> };
>
> + pinctrl: ingenic-pinctrl@10010000 {
The node name should be generic, so please rename it to something like
"pin-controller@..."
> + compatible = "ingenic,jz4740-pinctrl";
> + reg = <0x10010000 0x400>;
> +
> + gpa: gpio-controller@0 {
The name should be just "gpio@0", according to ePAPR and its successor
spec. Although, using the <unit-address> without the "reg" prop isn't allowed
either...
[...]
MBR, Sergei
^ permalink raw reply
* [PATCH v2 3/3] powerpc/powernv: Introduce address translation services for Nvlink2
From: Alistair Popple @ 2017-04-03 9:51 UTC (permalink / raw)
To: mpe
Cc: linuxppc-dev, linux-kernel, devicetree, mhairgrove, robh+dt,
shailendras, Alistair Popple
In-Reply-To: <1491213104-24450-1-git-send-email-alistair@popple.id.au>
Nvlink2 supports address translation services (ATS) allowing devices
to request address translations from an mmu known as the nest MMU
which is setup to walk the CPU page tables.
To access this functionality certain firmware calls are required to
setup and manage hardware context tables in the nvlink processing unit
(NPU). The NPU also manages forwarding of TLB invalidates (known as
address translation shootdowns/ATSDs) to attached devices.
This patch exports several methods to allow device drivers to register
a process id (PASID/PID) in the hardware tables and to receive
notification of when a device should stop issuing address translation
requests (ATRs). It also adds a fault handler to allow device drivers
to demand fault pages in.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
---
Changes since v1:
- Moved exported function call prototypes to an externally accessable
header.
- Fixed invalidation of the NMMU PWC (this also fixes the
reported build failure).
arch/powerpc/include/asm/book3s/64/mmu.h | 6 +
arch/powerpc/include/asm/opal-api.h | 5 +-
arch/powerpc/include/asm/opal.h | 5 +
arch/powerpc/include/asm/powernv.h | 22 ++
arch/powerpc/mm/mmu_context_book3s64.c | 1 +
arch/powerpc/platforms/powernv/npu-dma.c | 443 +++++++++++++++++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 3 +
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +
arch/powerpc/platforms/powernv/pci.h | 15 +-
9 files changed, 500 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index 805d4105..1676ec8 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -73,10 +73,16 @@ extern struct patb_entry *partition_tb;
typedef unsigned long mm_context_id_t;
struct spinlock;
+/* Maximum possible number of NPUs in a system. */
+#define NV_MAX_NPUS 8
+
typedef struct {
mm_context_id_t id;
u16 user_psize; /* page size index */
+ /* NPU NMMU context */
+ struct npu_context *npu_context;
+
#ifdef CONFIG_PPC_MM_SLICES
u64 low_slices_psize; /* SLB page size encodings */
unsigned char high_slices_psize[SLICE_ARRAY_SIZE];
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index a0aa285..a599a2c 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -168,7 +168,10 @@
#define OPAL_INT_SET_MFRR 125
#define OPAL_PCI_TCE_KILL 126
#define OPAL_NMMU_SET_PTCR 127
-#define OPAL_LAST 127
+#define OPAL_NPU_INIT_CONTEXT 146
+#define OPAL_NPU_DESTROY_CONTEXT 147
+#define OPAL_NPU_MAP_LPAR 148
+#define OPAL_LAST 148
/* Device tree flags */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 1ff03a6..b3b97c4 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -29,6 +29,11 @@ extern struct device_node *opal_node;
/* API functions */
int64_t opal_invalid_call(void);
+int64_t opal_npu_destroy_context(uint64_t phb_id, uint64_t pid, uint64_t bdf);
+int64_t opal_npu_init_context(uint64_t phb_id, int pasid, uint64_t msr,
+ uint64_t bdf);
+int64_t opal_npu_map_lpar(uint64_t phb_id, uint64_t bdf, uint64_t lparid,
+ uint64_t lpcr);
int64_t opal_console_write(int64_t term_number, __be64 *length,
const uint8_t *buffer);
int64_t opal_console_read(int64_t term_number, __be64 *length,
diff --git a/arch/powerpc/include/asm/powernv.h b/arch/powerpc/include/asm/powernv.h
index 0e9c240..f627977 100644
--- a/arch/powerpc/include/asm/powernv.h
+++ b/arch/powerpc/include/asm/powernv.h
@@ -11,9 +11,31 @@
#define _ASM_POWERNV_H
#ifdef CONFIG_PPC_POWERNV
+#define NPU2_WRITE 1
extern void powernv_set_nmmu_ptcr(unsigned long ptcr);
+extern struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
+ unsigned long flags,
+ struct npu_context *(*cb)(struct npu_context *, void *),
+ void *priv);
+extern void pnv_npu2_destroy_context(struct npu_context *context,
+ struct pci_dev *gpdev);
+extern int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
+ unsigned long *flags, unsigned long *status,
+ int count);
#else
static inline void powernv_set_nmmu_ptcr(unsigned long ptcr) { }
+static inline struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
+ unsigned long flags,
+ struct npu_context *(*cb)(struct npu_context *, void *),
+ void *priv) { return ERR_PTR(-ENODEV); }
+static inline void pnv_npu2_destroy_context(struct npu_context *context,
+ struct pci_dev *gpdev) { }
+
+static inline int pnv_npu2_handle_fault(struct npu_context *context,
+ uintptr_t *ea, unsigned long *flags,
+ unsigned long *status, int count) {
+ return -ENODEV;
+}
#endif
#endif /* _ASM_POWERNV_H */
diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c
index 73bf6e1..eb317f1 100644
--- a/arch/powerpc/mm/mmu_context_book3s64.c
+++ b/arch/powerpc/mm/mmu_context_book3s64.c
@@ -67,6 +67,7 @@ static int radix__init_new_context(struct mm_struct *mm, int index)
*/
rts_field = radix__get_tree_size();
process_tb[index].prtb0 = cpu_to_be64(rts_field | __pa(mm->pgd) | RADIX_PGD_INDEX_SIZE);
+ mm->context.npu_context = NULL;
return 0;
}
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
index 050bd5d..7392520 100644
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -9,11 +9,20 @@
* License as published by the Free Software Foundation.
*/
+#include <linux/slab.h>
+#include <linux/mmu_notifier.h>
+#include <linux/mmu_context.h>
+#include <linux/of.h>
#include <linux/export.h>
#include <linux/pci.h>
#include <linux/memblock.h>
#include <linux/iommu.h>
+#include <asm/tlb.h>
+#include <asm/powernv.h>
+#include <asm/reg.h>
+#include <asm/opal.h>
+#include <asm/io.h>
#include <asm/iommu.h>
#include <asm/pnv-pci.h>
#include <asm/msi_bitmap.h>
@@ -22,6 +31,8 @@
#include "powernv.h"
#include "pci.h"
+#define npu_to_phb(x) container_of(x, struct pnv_phb, npu)
+
/*
* Other types of TCE cache invalidation are not functional in the
* hardware.
@@ -371,3 +382,435 @@ struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct pnv_ioda_pe *npe)
return gpe;
}
+
+/* Maximum number of nvlinks per npu */
+#define NV_MAX_LINKS 6
+
+/* Maximum index of npu2 hosts in the system. Always < NV_MAX_NPUS */
+static int max_npu2_index;
+
+struct npu_context {
+ struct mm_struct *mm;
+ struct pci_dev *npdev[NV_MAX_NPUS][NV_MAX_LINKS];
+ struct mmu_notifier mn;
+ struct kref kref;
+
+ /* Callback to stop translation requests on a given gpu */
+ struct npu_context *(*release_cb)(struct npu_context *, void *);
+
+ /* Private pointer passed to the above callback for usage by
+ * device drivers
+ */
+ void *priv;
+};
+
+/*
+ * Find a free MMIO ATSD register and mark it in use. Return -ENOSPC
+ * if none are available.
+ */
+static int get_mmio_atsd_reg(struct npu *npu)
+{
+ int i;
+
+ for (i = 0; i < npu->mmio_atsd_count; i++) {
+ if (!test_and_set_bit(i, &npu->mmio_atsd_usage))
+ return i;
+ }
+
+ return -ENOSPC;
+}
+
+static void put_mmio_atsd_reg(struct npu *npu, int reg)
+{
+ clear_bit(reg, &npu->mmio_atsd_usage);
+}
+
+/* MMIO ATSD register offsets */
+#define XTS_ATSD_AVA 1
+#define XTS_ATSD_STAT 2
+
+static int mmio_launch_invalidate(struct npu *npu, unsigned long launch,
+ unsigned long va)
+{
+ int mmio_atsd_reg;
+
+ do {
+ mmio_atsd_reg = get_mmio_atsd_reg(npu);
+ cpu_relax();
+ } while (mmio_atsd_reg < 0);
+
+ __raw_writeq(cpu_to_be64(va),
+ npu->mmio_atsd_regs[mmio_atsd_reg] + XTS_ATSD_AVA);
+ eieio();
+ __raw_writeq(cpu_to_be64(launch), npu->mmio_atsd_regs[mmio_atsd_reg]);
+
+ return mmio_atsd_reg;
+}
+
+static int mmio_invalidate_pid(struct npu *npu, unsigned long pid)
+{
+ unsigned long launch;
+
+ /* IS set to invalidate matching PID */
+ launch = PPC_BIT(12);
+
+ /* PRS set to process-scoped */
+ launch |= PPC_BIT(13);
+
+ /* AP */
+ launch |= (u64) mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
+
+ /* PID */
+ launch |= pid << PPC_BITLSHIFT(38);
+
+ /* Invalidating the entire process doesn't use a va */
+ return mmio_launch_invalidate(npu, launch, 0);
+}
+
+static int mmio_invalidate_va(struct npu *npu, unsigned long va,
+ unsigned long pid)
+{
+ unsigned long launch;
+
+ /* IS set to invalidate target VA */
+ launch = 0;
+
+ /* PRS set to process scoped */
+ launch |= PPC_BIT(13);
+
+ /* AP */
+ launch |= (u64) mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
+
+ /* PID */
+ launch |= pid << PPC_BITLSHIFT(38);
+
+ return mmio_launch_invalidate(npu, launch, va);
+}
+
+#define mn_to_npu_context(x) container_of(x, struct npu_context, mn)
+
+/* Invalidate either a single address or an entire PID depending on
+ * the value of va.
+ */
+static void mmio_invalidate(struct npu_context *npu_context, int va,
+ unsigned long address)
+{
+ int i, j, reg;
+ struct npu *npu;
+ struct pnv_phb *nphb;
+ struct pci_dev *npdev;
+ struct {
+ struct npu *npu;
+ int reg;
+ } mmio_atsd_reg[NV_MAX_NPUS];
+ unsigned long pid = npu_context->mm->context.id;
+
+ /* Loop over all the NPUs this process is active on and launch
+ * an invalidate.
+ */
+ for (i = 0; i <= max_npu2_index; i++) {
+ mmio_atsd_reg[i].reg = -1;
+ for (j = 0; j < NV_MAX_LINKS; j++) {
+ npdev = npu_context->npdev[i][j];
+ if (!npdev)
+ continue;
+
+ nphb = pci_bus_to_host(npdev->bus)->private_data;
+ npu = &nphb->npu;
+ mmio_atsd_reg[i].npu = npu;
+
+ if (va)
+ mmio_atsd_reg[i].reg =
+ mmio_invalidate_va(npu, address, pid);
+ else
+ mmio_atsd_reg[i].reg =
+ mmio_invalidate_pid(npu, pid);
+
+ /* The NPU hardware forwards the shootdown to
+ * all GPUs so we only have to launch one
+ * shootdown per NPU.
+ */
+ break;
+ }
+ }
+
+ /* Unfortunately the nest mmu does not support flushing
+ * specific addresses so we have to flush the whole mm.
+ */
+ radix__flush_tlb_mm(npu_context->mm);
+
+ /* Wait for all invalidations to complete */
+ for (i = 0; i <= max_npu2_index; i++) {
+ if (mmio_atsd_reg[i].reg < 0)
+ continue;
+
+ /* Wait for completion */
+ npu = mmio_atsd_reg[i].npu;
+ reg = mmio_atsd_reg[i].reg;
+ while (__raw_readq(npu->mmio_atsd_regs[reg] + XTS_ATSD_STAT))
+ cpu_relax();
+ put_mmio_atsd_reg(npu, reg);
+ }
+}
+
+static void pnv_npu2_mn_release(struct mmu_notifier *mn,
+ struct mm_struct *mm)
+{
+ struct npu_context *npu_context = mn_to_npu_context(mn);
+
+ /* Call into device driver to stop requests to the NMMU */
+ if (npu_context->release_cb)
+ npu_context->release_cb(npu_context, npu_context->priv);
+
+ /* There should be no more translation requests for this PID,
+ * but we need to ensure any entries for it are removed from
+ * the TLB.
+ */
+ mmio_invalidate(npu_context, 0, 0);
+}
+
+static void pnv_npu2_mn_change_pte(struct mmu_notifier *mn,
+ struct mm_struct *mm,
+ unsigned long address,
+ pte_t pte)
+{
+ struct npu_context *npu_context = mn_to_npu_context(mn);
+
+ mmio_invalidate(npu_context, 1, address);
+}
+
+static void pnv_npu2_mn_invalidate_page(struct mmu_notifier *mn,
+ struct mm_struct *mm,
+ unsigned long address)
+{
+ struct npu_context *npu_context = mn_to_npu_context(mn);
+
+ mmio_invalidate(npu_context, 1, address);
+}
+
+static void pnv_npu2_mn_invalidate_range(struct mmu_notifier *mn,
+ struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ struct npu_context *npu_context = mn_to_npu_context(mn);
+ unsigned long address;
+
+ for (address = start; address <= end; address += PAGE_SIZE)
+ mmio_invalidate(npu_context, 1, address);
+}
+
+static const struct mmu_notifier_ops nv_nmmu_notifier_ops = {
+ .release = pnv_npu2_mn_release,
+ .change_pte = pnv_npu2_mn_change_pte,
+ .invalidate_page = pnv_npu2_mn_invalidate_page,
+ .invalidate_range = pnv_npu2_mn_invalidate_range,
+};
+
+/*
+ * Call into OPAL to setup the nmmu context for the current task in
+ * the NPU. This must be called to setup the context tables before the
+ * GPU issues ATRs. pdev should be a pointed to PCIe GPU device.
+ *
+ * A release callback should be registered to allow a device driver to
+ * be notified that it should not launch any new translation requests
+ * as the final TLB invalidate is about to occur.
+ *
+ * Returns an error if there no contexts are currently available or a
+ * npu_context which should be passed to pnv_npu2_handle_fault().
+ *
+ * mmap_sem must be held in write mode.
+ */
+struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
+ unsigned long flags,
+ struct npu_context *(*cb)(struct npu_context *, void *),
+ void *priv)
+{
+ int rc;
+ u32 nvlink_index;
+ struct device_node *nvlink_dn;
+ struct mm_struct *mm = current->mm;
+ struct pnv_phb *nphb;
+ struct npu *npu;
+ struct npu_context *npu_context;
+
+ /* At present we don't support gpus connected to multiple NPUs
+ * and I'm not sure the hardware does either.
+ */
+ struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
+
+ if (!firmware_has_feature(FW_FEATURE_OPAL))
+ return ERR_PTR(-ENODEV);
+
+ if (!npdev)
+ /* No nvlink associated with this GPU device */
+ return ERR_PTR(-ENODEV);
+
+ if (!mm) {
+ /* kernel thread contexts are not supported */
+ return ERR_PTR(-EINVAL);
+ }
+
+ nphb = pci_bus_to_host(npdev->bus)->private_data;
+ npu = &nphb->npu;
+
+ /* Setup the NPU context table for a particular GPU. These
+ * need to be per-GPU as we need the tables to filter ATSDs
+ * when there are no active contexts on a particular GPU.
+ */
+ rc = opal_npu_init_context(nphb->opal_id, mm->context.id, flags,
+ PCI_DEVID(gpdev->bus->number, gpdev->devfn));
+ if (rc < 0)
+ return ERR_PTR(-ENOSPC);
+
+ /* We store the npu pci device so we can more easily get at
+ * the associated npus.
+ */
+ npu_context = mm->context.npu_context;
+ if (!npu_context) {
+ npu_context = kzalloc(sizeof(struct npu_context), GFP_KERNEL);
+ if (!npu_context)
+ return ERR_PTR(-ENOMEM);
+
+ mm->context.npu_context = npu_context;
+ npu_context->mm = mm;
+ npu_context->mn.ops = &nv_nmmu_notifier_ops;
+ __mmu_notifier_register(&npu_context->mn, mm);
+ kref_init(&npu_context->kref);
+ } else {
+ kref_get(&npu_context->kref);
+ }
+
+ npu_context->release_cb = cb;
+ npu_context->priv = priv;
+ nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
+ if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
+ &nvlink_index)))
+ return ERR_PTR(-ENODEV);
+ npu_context->npdev[npu->index][nvlink_index] = npdev;
+
+ return npu_context;
+}
+EXPORT_SYMBOL(pnv_npu2_init_context);
+
+static void pnv_npu2_release_context(struct kref *kref)
+{
+ struct npu_context *npu_context =
+ container_of(kref, struct npu_context, kref);
+
+ npu_context->mm->context.npu_context = NULL;
+ mmu_notifier_unregister(&npu_context->mn,
+ npu_context->mm);
+
+ kfree(npu_context);
+}
+
+void pnv_npu2_destroy_context(struct npu_context *npu_context,
+ struct pci_dev *gpdev)
+{
+ struct pnv_phb *nphb, *phb;
+ struct npu *npu;
+ struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
+ struct device_node *nvlink_dn;
+ u32 nvlink_index;
+
+ if (WARN_ON(!npdev))
+ return;
+
+ if (!firmware_has_feature(FW_FEATURE_OPAL))
+ return;
+
+ nphb = pci_bus_to_host(npdev->bus)->private_data;
+ npu = &nphb->npu;
+ phb = pci_bus_to_host(gpdev->bus)->private_data;
+ nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
+ if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
+ &nvlink_index)))
+ return;
+ npu_context->npdev[npu->index][nvlink_index] = NULL;
+ opal_npu_destroy_context(phb->opal_id, npu_context->mm->context.id,
+ PCI_DEVID(gpdev->bus->number, gpdev->devfn));
+ kref_put(&npu_context->kref, pnv_npu2_release_context);
+}
+EXPORT_SYMBOL(pnv_npu2_destroy_context);
+
+/*
+ * Assumes mmap_sem is held for the contexts associated mm.
+ */
+int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
+ unsigned long *flags, unsigned long *status, int count)
+{
+ u64 rc = 0, result = 0;
+ int i, is_write;
+ struct page *page[1];
+
+ /* mmap_sem should be held so the struct_mm must be present */
+ struct mm_struct *mm = context->mm;
+
+ if (!firmware_has_feature(FW_FEATURE_OPAL))
+ return -ENODEV;
+
+ WARN_ON(!rwsem_is_locked(&mm->mmap_sem));
+
+ for (i = 0; i < count; i++) {
+ is_write = flags[i] & NPU2_WRITE;
+ rc = get_user_pages_remote(NULL, mm, ea[i], 1,
+ is_write ? FOLL_WRITE : 0,
+ page, NULL, NULL);
+
+ /* To support virtualised environments we will have to
+ * do an access to the page to ensure it gets faulted
+ * into the hypervisor. For the moment virtualisation
+ * is not supported in other areas so leave the access
+ * out.
+ */
+ if (rc != 1) {
+ status[i] = rc;
+ result = -EFAULT;
+ continue;
+ }
+
+ status[i] = 0;
+ put_page(page[0]);
+ }
+
+ return result;
+}
+EXPORT_SYMBOL(pnv_npu2_handle_fault);
+
+int pnv_npu2_init(struct pnv_phb *phb)
+{
+ unsigned int i;
+ u64 mmio_atsd;
+ struct device_node *dn;
+ struct pci_dev *gpdev;
+ static int npu_index;
+ uint64_t rc = 0;
+
+ for_each_child_of_node(phb->hose->dn, dn) {
+ gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
+ if (gpdev) {
+ rc = opal_npu_map_lpar(phb->opal_id,
+ PCI_DEVID(gpdev->bus->number, gpdev->devfn),
+ 0, 0);
+ if (rc)
+ dev_err(&gpdev->dev,
+ "Error %lld mapping device to LPAR\n",
+ rc);
+ }
+ }
+
+ for (i = 0; !of_property_read_u64_index(phb->hose->dn, "ibm,mmio-atsd",
+ i, &mmio_atsd); i++)
+ phb->npu.mmio_atsd_regs[i] = ioremap(mmio_atsd, 32);
+
+ pr_info("NPU%lld: Found %d MMIO ATSD registers", phb->opal_id, i);
+ phb->npu.mmio_atsd_count = i;
+ phb->npu.mmio_atsd_usage = 0;
+ npu_index++;
+ if (WARN_ON(npu_index >= NV_MAX_NPUS))
+ return -ENOSPC;
+ max_npu2_index = npu_index;
+ phb->npu.index = npu_index;
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index da8a0f7..085677bfe 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -301,3 +301,6 @@ OPAL_CALL(opal_int_eoi, OPAL_INT_EOI);
OPAL_CALL(opal_int_set_mfrr, OPAL_INT_SET_MFRR);
OPAL_CALL(opal_pci_tce_kill, OPAL_PCI_TCE_KILL);
OPAL_CALL(opal_nmmu_set_ptcr, OPAL_NMMU_SET_PTCR);
+OPAL_CALL(opal_npu_init_context, OPAL_NPU_INIT_CONTEXT);
+OPAL_CALL(opal_npu_destroy_context, OPAL_NPU_DESTROY_CONTEXT);
+OPAL_CALL(opal_npu_map_lpar, OPAL_NPU_MAP_LPAR);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index e367382..9b24a52 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1262,6 +1262,8 @@ static void pnv_pci_ioda_setup_PEs(void)
/* PE#0 is needed for error reporting */
pnv_ioda_reserve_pe(phb, 0);
pnv_ioda_setup_npu_PEs(hose->bus);
+ if (phb->model == PNV_PHB_MODEL_NPU2)
+ pnv_npu2_init(phb);
}
}
}
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index e1d3e55..4eab713 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -7,6 +7,9 @@
struct pci_dn;
+/* Maximum possible number of ATSD MMIO registers per NPU */
+#define NV_NMMU_ATSD_REGS 8
+
enum pnv_phb_type {
PNV_PHB_IODA1 = 0,
PNV_PHB_IODA2 = 1,
@@ -174,6 +177,16 @@ struct pnv_phb {
struct OpalIoP7IOCErrorData hub_diag;
} diag;
+ /* Nvlink2 data */
+ struct npu {
+ int index;
+ __be64 *mmio_atsd_regs[NV_NMMU_ATSD_REGS];
+ unsigned int mmio_atsd_count;
+
+ /* Bitmask for MMIO register usage */
+ unsigned long mmio_atsd_usage;
+ } npu;
+
#ifdef CONFIG_CXL_BASE
struct cxl_afu *cxl_afu;
#endif
@@ -236,7 +249,7 @@ extern long pnv_npu_set_window(struct pnv_ioda_pe *npe, int num,
extern long pnv_npu_unset_window(struct pnv_ioda_pe *npe, int num);
extern void pnv_npu_take_ownership(struct pnv_ioda_pe *npe);
extern void pnv_npu_release_ownership(struct pnv_ioda_pe *npe);
-
+extern int pnv_npu2_init(struct pnv_phb *phb);
/* cxl functions */
extern bool pnv_cxl_enable_device_hook(struct pci_dev *dev);
--
2.1.4
^ permalink raw reply related
* [PATCH v2 2/3] powerpc/powernv: Add sanity checks to pnv_pci_get_{gpu|npu}_dev
From: Alistair Popple @ 2017-04-03 9:51 UTC (permalink / raw)
To: mpe-Gsx/Oe8HsFggBc27wqDAHg
Cc: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
mhairgrove-DDmLM1+adcrQT0dZR+AlfA, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
shailendras-DDmLM1+adcrQT0dZR+AlfA, Alistair Popple
In-Reply-To: <1491213104-24450-1-git-send-email-alistair-Y4h6yKqj69EXC2x5gXVKYQ@public.gmane.org>
The pnv_pci_get_{gpu|npu}_dev functions are used to find associations
between nvlink PCIe devices and standard PCIe devices. However they
lacked basic sanity checking which results in NULL pointer
dereferencing if they are incorrect called can be harder to spot than
an explicit WARN_ON.
Signed-off-by: Alistair Popple <alistair-Y4h6yKqj69EXC2x5gXVKYQ@public.gmane.org>
---
arch/powerpc/platforms/powernv/npu-dma.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
index 1c383f3..050bd5d 100644
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -37,6 +37,12 @@ struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev)
struct device_node *dn;
struct pci_dev *gpdev;
+ if (WARN_ON(!npdev))
+ return NULL;
+
+ if (WARN_ON(!npdev->dev.of_node))
+ return NULL;
+
/* Get assoicated PCI device */
dn = of_parse_phandle(npdev->dev.of_node, "ibm,gpu", 0);
if (!dn)
@@ -55,6 +61,12 @@ struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index)
struct device_node *dn;
struct pci_dev *npdev;
+ if (WARN_ON(!gpdev))
+ return NULL;
+
+ if (WARN_ON(!gpdev->dev.of_node))
+ return NULL;
+
/* Get assoicated PCI device */
dn = of_parse_phandle(gpdev->dev.of_node, "ibm,npu", index);
if (!dn)
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v2 1/3] drivers/of/base.c: Add of_property_read_u64_index
From: Alistair Popple @ 2017-04-03 9:51 UTC (permalink / raw)
To: mpe-Gsx/Oe8HsFggBc27wqDAHg
Cc: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
mhairgrove-DDmLM1+adcrQT0dZR+AlfA, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
shailendras-DDmLM1+adcrQT0dZR+AlfA, Alistair Popple
There is of_property_read_u32_index but no u64 variant. This patch
adds one similar to the u32 version for u64.
Signed-off-by: Alistair Popple <alistair-Y4h6yKqj69EXC2x5gXVKYQ@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
drivers/of/base.c | 31 +++++++++++++++++++++++++++++++
include/linux/of.h | 3 +++
2 files changed, 34 insertions(+)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index d7c4629..0ea16bd 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1213,6 +1213,37 @@ int of_property_read_u32_index(const struct device_node *np,
EXPORT_SYMBOL_GPL(of_property_read_u32_index);
/**
+ * of_property_read_u64_index - Find and read a u64 from a multi-value property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the u64 in the list of values
+ * @out_value: pointer to return value, modified only if no error.
+ *
+ * Search for a property in a device node and read nth 64-bit value from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_value is modified only if a valid u64 value can be decoded.
+ */
+int of_property_read_u64_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u64 *out_value)
+{
+ const u64 *val = of_find_property_value_of_size(np, propname,
+ ((index + 1) * sizeof(*out_value)),
+ 0, NULL);
+
+ if (IS_ERR(val))
+ return PTR_ERR(val);
+
+ *out_value = be64_to_cpup(((__be64 *)val) + index);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u64_index);
+
+/**
* of_property_read_variable_u8_array - Find and read an array of u8 from a
* property, with bounds on the minimum and maximum array size.
*
diff --git a/include/linux/of.h b/include/linux/of.h
index 21e6323..d08788d 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -292,6 +292,9 @@ extern int of_property_count_elems_of_size(const struct device_node *np,
extern int of_property_read_u32_index(const struct device_node *np,
const char *propname,
u32 index, u32 *out_value);
+extern int of_property_read_u64_index(const struct device_node *np,
+ const char *propname,
+ u32 index, u64 *out_value);
extern int of_property_read_variable_u8_array(const struct device_node *np,
const char *propname, u8 *out_values,
size_t sz_min, size_t sz_max);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
From: Icenowy Zheng @ 2017-04-03 9:31 UTC (permalink / raw)
To: Maxime Ripard
Cc: Lee Jones, Chen-Yu Tsai, Jonathan Cameron, Quentin Schulz,
Zhang Rui, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-pm-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-iio-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
In-Reply-To: <20170403091523.6atl7nq4m2qkpn3d@lukather>
在 2017年04月03日 17:15, Maxime Ripard 写道:
> On Sun, Apr 02, 2017 at 09:33:01PM +0800, Icenowy Zheng wrote:
>> Allwinner H3 features a thermal sensor like the one in A33, but has its
>> register re-arranged, the clock divider moved to CCU (originally the
>> clock divider is in ADC) and added a pair of bus clock and reset.
>>
>> Update the binding document to cover H3.
>>
>> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
>> ---
>> .../devicetree/bindings/mfd/sun4i-gpadc.txt | 23 ++++++++++++++++++++--
>> 1 file changed, 21 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
>> index badff3611a98..7753133ca0ff 100644
>> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
>> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
>> @@ -4,12 +4,20 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
>> and sometimes as a touchscreen controller.
>>
>> Required properties:
>> - - compatible: "allwinner,sun8i-a33-ths",
>> + - compatible: must contain one of the following compatibles:
>> + - "allwinner,sun8i-a33-ths"
>> + - "allwinner,sun8i-h3-ths"
>> - reg: mmio address range of the chip,
>> - #thermal-sensor-cells: shall be 0,
>> - #io-channel-cells: shall be 0,
>>
>> -Example:
>> +Required properties for the following compatibles:
>> + - "allwinner,sun8i-h3-ths"
>> + - clocks: the bus clock and the input clock of the ADC,
>> + - clock-names: should be "bus" and "ths",
>
> I guess mod instead of ths would be more consistent.
In fact I will prefer "sample" here if not "ths", as it's used
for the sampling, not like other mod clocks, which controls
all the IP block's logic.
>
> Maxime
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3
From: Maxime Ripard @ 2017-04-03 9:15 UTC (permalink / raw)
To: Icenowy Zheng
Cc: Lee Jones, Chen-Yu Tsai, Jonathan Cameron, Quentin Schulz,
Zhang Rui, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-pm-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-iio-u79uwXL29TY76Z2rM5mHXA,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw
In-Reply-To: <20170402133304.56824-2-icenowy-h8G6r0blFSE@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1667 bytes --]
On Sun, Apr 02, 2017 at 09:33:01PM +0800, Icenowy Zheng wrote:
> Allwinner H3 features a thermal sensor like the one in A33, but has its
> register re-arranged, the clock divider moved to CCU (originally the
> clock divider is in ADC) and added a pair of bus clock and reset.
>
> Update the binding document to cover H3.
>
> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
> ---
> .../devicetree/bindings/mfd/sun4i-gpadc.txt | 23 ++++++++++++++++++++--
> 1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> index badff3611a98..7753133ca0ff 100644
> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> @@ -4,12 +4,20 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
> and sometimes as a touchscreen controller.
>
> Required properties:
> - - compatible: "allwinner,sun8i-a33-ths",
> + - compatible: must contain one of the following compatibles:
> + - "allwinner,sun8i-a33-ths"
> + - "allwinner,sun8i-h3-ths"
> - reg: mmio address range of the chip,
> - #thermal-sensor-cells: shall be 0,
> - #io-channel-cells: shall be 0,
>
> -Example:
> +Required properties for the following compatibles:
> + - "allwinner,sun8i-h3-ths"
> + - clocks: the bus clock and the input clock of the ADC,
> + - clock-names: should be "bus" and "ths",
I guess mod instead of ths would be more consistent.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply
* [PATCH v3 20/20] ARM: sunxi: Enable dwmac-sun8i driver on multi_v7_defconfig
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, linux-kernel, netdev, linux-arm-kernel,
Corentin Labbe
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
Enable the dwmac-sun8i driver in the multi_v7 default configuration
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2196206..0af325b 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -257,6 +257,7 @@ CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_DWMAC_DWC_QOS_ETH=y
+CONFIG_DWMAC_SUN8I=y
CONFIG_TI_CPSW=y
CONFIG_XILINX_EMACLITE=y
CONFIG_AT803X_PHY=y
--
2.10.2
^ permalink raw reply related
* [PATCH v3 19/20] ARM: sunxi: Enable dwmac-sun8i driver on sunxi_defconfig
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, linux-kernel, netdev, linux-arm-kernel,
LABBE Corentin
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
From: LABBE Corentin <clabbe.montjoie@gmail.com>
Enable the dwmac-sun8i driver in the sunxi default configuration
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/configs/sunxi_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 5cd5dd70..504e022 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -40,6 +40,7 @@ CONFIG_ATA=y
CONFIG_AHCI_SUNXI=y
CONFIG_NETDEVICES=y
CONFIG_SUN4I_EMAC=y
+CONFIG_DWMAC_SUN8I=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
--
2.10.2
^ permalink raw reply related
* [PATCH v3 18/20] ARM: dts: sun50i-a64: enable dwmac-sun8i on the BananaPi M64
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, linux-kernel, netdev, linux-arm-kernel,
Corentin Labbe
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
The dwmac-sun8i hardware is present on the BananaPi M64.
It uses an external PHY rtl8211e via RGMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 6872135..0c07c89 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -77,6 +77,21 @@
bias-pull-up;
};
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
--
2.10.2
^ permalink raw reply related
* [PATCH v3 17/20] ARM: dts: sun50i-a64: enable dwmac-sun8i on pine64 plus
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, linux-kernel, netdev, linux-arm-kernel,
Corentin Labbe
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
The dwmac-sun8i hardware is present on the pine64 plus.
It uses an external PHY rtl8211e via RGMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
.../arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index 790d14d..dea76c2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -46,5 +46,20 @@
model = "Pine64+";
compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
- /* TODO: Camera, Ethernet PHY, touchscreen, etc. */
+ /* TODO: Camera, touchscreen, etc. */
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ status = "okay";
};
--
2.10.2
^ permalink raw reply related
* [PATCH v3 16/20] ARM: dts: sun50i-a64: enable dwmac-sun8i on pine64
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, linux-kernel, netdev, linux-arm-kernel,
Corentin Labbe
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
The dwmac-sun8i hardware is present on the pine64
It uses an external PHY via RMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index c680ed3..6aee3d5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -109,3 +109,19 @@
&usbphy {
status = "okay";
};
+
+&mdio {
+ ext_rmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ phy-mode = "rmii";
+ phy-handle = <&ext_rmii_phy1>;
+ status = "okay";
+
+};
--
2.10.2
^ permalink raw reply related
* [PATCH v3 15/20] ARM64: dts: sun50i-a64: add dwmac-sun8i Ethernet driver
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Corentin Labbe
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit
connections. It is very similar to the device found in the Allwinner
H3, but lacks the internal 100 Mbit PHY and its associated control
bits.
This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps
it disabled at this level.
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 37 +++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 1683a1f..dcf9ca4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -277,6 +277,23 @@
bias-pull-up;
};
+ rmii_pins: rmii_pins {
+ pins = "PD10", "PD11", "PD13", "PD14",
+ "PD17", "PD18", "PD19", "PD20",
+ "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
+ rgmii_pins: rgmii_pins {
+ pins = "PD8", "PD9", "PD10", "PD11",
+ "PD12", "PD13", "PD15",
+ "PD16", "PD17", "PD18", "PD19",
+ "PD20", "PD21", "PD22", "PD23";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
uart0_pins_a: uart0@0 {
pins = "PB8", "PB9";
function = "uart0";
@@ -381,6 +398,26 @@
#size-cells = <0>;
};
+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun50i-a64-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x100>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v3 14/20] ARM64: dts: sun50i-a64: Add dt node for the syscon control module
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, linux-kernel, netdev, linux-arm-kernel,
Corentin Labbe
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
This patch add the dt node for the syscon register present on the
Allwinner A64.
Only two register are present in this syscon and the only one useful is
the one dedicated to EMAC clock.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 1c64ea2..1683a1f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -121,6 +121,12 @@
#size-cells = <1>;
ranges;
+ syscon: syscon@01c00000 {
+ compatible = "allwinner,sun8i-a64-system-controller",
+ "syscon";
+ reg = <0x01c00000 0x1000>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
--
2.10.2
^ permalink raw reply related
* [PATCH v3 13/20] ARM: dts: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, Corentin Labbe, linux-kernel, linux-arm-kernel,
netdev
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
On the Orange Pi PC Plus, the polarity of the LEDs on the RJ45 Ethernet
port were changed from active low to active high.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
index 8b93f5c..0380769 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -86,3 +86,8 @@
/* eMMC is missing pull-ups */
bias-pull-up;
};
+
+&emac {
+ /* LEDs changed to active high on the plus */
+ /delete-property/ allwinner,leds-active-low;
+};
--
2.10.2
^ permalink raw reply related
* [PATCH v3 12/20] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange Pi plus
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Corentin Labbe
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The dwmac-sun8i hardware is present on the Orange PI plus.
It uses an external PHY rtl8211e via RGMII.
This patch create the needed regulator, emac and phy nodes.
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 36 ++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 8c40ab7..6852006 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -58,6 +58,18 @@
enable-active-high;
gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
};
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_orangepi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
};
&ehci3 {
@@ -86,8 +98,32 @@
pins = "PG11";
function = "gpio_out";
};
+
+ gmac_power_pin_orangepi: gmac_power_pin@0 {
+ pins = "PD6";
+ function = "gpio_out";
+ drive-strength = <10>;
+ };
};
&usbphy {
usb3_vbus-supply = <®_usb3_vbus>;
};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
+ allwinner,leds-active-low;
+ status = "okay";
+};
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v3 11/20] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange PI One
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, Corentin Labbe, linux-kernel, linux-arm-kernel,
netdev
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
The dwmac-sun8i hardware is present on the Orange PI One.
It uses the internal PHY.
This patch create the needed emac node.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 5fea430..2ffa4c1 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -53,6 +53,7 @@
aliases {
serial0 = &uart0;
+ ethernet0 = &emac;
};
chosen {
@@ -97,6 +98,13 @@
status = "okay";
};
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
--
2.10.2
^ permalink raw reply related
* [PATCH v3 10/20] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange Pi 2
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, Corentin Labbe, linux-kernel, linux-arm-kernel,
netdev
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
The dwmac-sun8i hardware is present on the Orange PI 2.
It uses the internal PHY.
This patch create the needed emac node.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 5b6d145..3f54b12 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -55,6 +55,7 @@
serial0 = &uart0;
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
ethernet1 = &rtl8189;
+ ethernet0 = &emac;
};
chosen {
@@ -203,3 +204,10 @@
usb1_vbus-supply = <®_usb1_vbus>;
status = "okay";
};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
--
2.10.2
^ permalink raw reply related
* [PATCH v3 09/20] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange PI PC
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, LABBE Corentin, linux-kernel, linux-arm-kernel,
netdev
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
From: LABBE Corentin <clabbe.montjoie@gmail.com>
The dwmac-sun8i hardware is present on the Orange PI PC.
It uses the internal PHY.
This patch create the needed emac node.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index f148111..746c25a 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -53,6 +53,7 @@
aliases {
serial0 = &uart0;
+ ethernet0 = &emac;
};
chosen {
@@ -184,3 +185,10 @@
/* USB VBUS is always on */
status = "okay";
};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ allwinner,leds-active-low;
+ status = "okay";
+};
--
2.10.2
^ permalink raw reply related
* [PATCH v3 08/20] ARM: dts: sun8i: Enable dwmac-sun8i on the Banana Pi M2+
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, linux,
catalin.marinas, will.deacon, peppe.cavallaro, alexandre.torgue
Cc: devicetree, LABBE Corentin, linux-kernel, linux-arm-kernel,
netdev
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie@gmail.com>
From: LABBE Corentin <clabbe.montjoie@gmail.com>
The dwmac-sun8i hardware is present on the Banana Pi M2+
It uses an external PHY rtl8211e via RGMII.
This patch create the needed regulator, emac and phy nodes.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 38 +++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index 52acbe1..7fd7704 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -90,6 +90,18 @@
pinctrl-0 = <&wifi_en_bpi_m2p>;
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_orangepi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
};
&ehci1 {
@@ -186,3 +198,29 @@
/* USB VBUS is on as long as VCC-IO is on */
status = "okay";
};
+
+&pio {
+ gmac_power_pin_orangepi: gmac_power_pin@0 {
+ pins = "PD6";
+ function = "gpio_out";
+ drive-strength = <10>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
+ allwinner,leds-active-low;
+ status = "okay";
+};
--
2.10.2
^ permalink raw reply related
* [PATCH v3 07/20] ARM: dts: sunxi-h3-h5: add dwmac-sun8i ethernet driver
From: Corentin Labbe @ 2017-04-03 9:14 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8, wens-jdAy2FN1RRM,
linux-I+IVW8TIWO2tmTQ+vhA3Yw, catalin.marinas-5wv7dgnIgG8,
will.deacon-5wv7dgnIgG8, peppe.cavallaro-qxv4g6HH51o,
alexandre.torgue-qxv4g6HH51o
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Corentin Labbe
In-Reply-To: <20170403091444.29876-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000
speed.
This patch enable the dwmac-sun8i on Allwinner H3/H5 SoC Device-tree.
SoC H3/H5 have an internal PHY, so optionals syscon and ephy are set.
Signed-off-by: Corentin Labbe <clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 0815c00..c55e8b0 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -304,6 +304,14 @@
interrupt-controller;
#interrupt-cells = <3>;
+ emac_rgmii_pins: emac0@0 {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+ "PD5", "PD7", "PD8", "PD9", "PD10",
+ "PD12", "PD13", "PD15", "PD16", "PD17";
+ function = "emac";
+ drive-strength = <40>;
+ };
+
i2c0_pins: i2c0 {
pins = "PA11", "PA12";
function = "i2c0";
@@ -400,6 +408,32 @@
clocks = <&osc24M>;
};
+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c30000 0x104>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ int_mii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ clocks = <&ccu CLK_BUS_EPHY>;
+ resets = <&ccu RST_BUS_EPHY>;
+ };
+ };
+ };
+
spi0: spi@01c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox