* Re: [PATCH v4 7/7] ARM64: dts: marvell: armada37xx: add pinctrl definition
From: Gregory CLEMENT @ 2017-04-26 10:28 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-gpio, Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Thomas Petazzoni, Linus Walleij, Rob Herring, devicetree,
linux-kernel, Nadav Haklai, Victor Gu, Marcin Wojtas, Wilson Ding,
Hua Jing, Neta Zur Hershkovits
In-Reply-To: <7b07bd69cd506effa716c41f8ec3dda7a7c6c563.1491405475.git-series.gregory.clement@free-electrons.com>
Hi,
On mer., avril 05 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Start to populate the device tree of the Armada 37xx with the pincontrol
> configuration used on the board providing a dts.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-3720-db.dts | 8 +++++-
> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 31 +++++++++++++++++++-
> 2 files changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> index 86602c907a61..e749c5727490 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> @@ -63,6 +63,8 @@
> };
>
> &i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> status = "okay";
> };
>
> @@ -73,6 +75,8 @@
>
> &spi0 {
> status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi_quad_pins>;
>
> m25p80@0 {
> compatible = "jedec,spi-nor";
> @@ -103,6 +107,8 @@
>
> /* Exported on the micro USB connector CON32 through an FTDI */
> &uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>;
> status = "okay";
> };
>
> @@ -128,6 +134,8 @@
> };
>
> ð0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> phy-mode = "rgmii-id";
> phy = <&phy0>;
> status = "okay";
> diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> index c02b13479458..2ac25f54d01d 100644
> --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> @@ -186,6 +186,31 @@
> clock-output-names = "xtal";
> #clock-cells = <0>;
> };
> +
> + spi_quad_pins: spi-quad-pins {
> + groups = "spi_quad";
> + function = "spi";
> + };
> +
> + i2c1_pins: i2c1-pins {
> + groups = "i2c1";
> + function = "i2c";
> + };
> +
> + i2c2_pins: i2c2-pins {
> + groups = "i2c2";
> + function = "i2c";
> + };
> +
> + uart1_pins: uart1-pins {
> + groups = "uart1";
> + function = "uart";
> + };
> +
> + uart2_pins: uart2-pins {
> + groups = "uart2";
> + function = "uart";
> + };
> };
>
> pinctrl_sb: pinctrl-sb@18800 {
> @@ -203,6 +228,12 @@
> <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + rgmii_pins: mii-pins {
> + groups = "rgmii";
> + function = "mii";
> + };
> +
> };
>
> eth0: ethernet@30000 {
> --
> git-series 0.9.1
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* Re: [PATCH v4 6/7] ARM64: dts: marvell: Add pinctrl nodes for Armada 3700
From: Gregory CLEMENT @ 2017-04-26 10:27 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-gpio, Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Thomas Petazzoni, Linus Walleij, Rob Herring, devicetree,
linux-kernel, Nadav Haklai, Victor Gu, Marcin Wojtas, Wilson Ding,
Hua Jing, Neta Zur Hershkovits
In-Reply-To: <1defc5c1925e819b28f2b3802aadc9a8e7be224a.1491405475.git-series.gregory.clement@free-electrons.com>
Hi,
On mer., avril 05 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Add the nodes for the two pin controller present in the Armada 37xx SoCs.
>
> Initially the node was named gpio1 using the same name that for the
> register range in the datasheet. However renaming it pinctr_nb (nb for
> North Bridge) makes more sens.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 42 +++++++++++++++++++--
> 1 file changed, 39 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> index b48d668a6ab6..c02b13479458 100644
> --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> @@ -157,10 +157,29 @@
> #clock-cells = <1>;
> };
>
> - gpio1: gpio@13800 {
> - compatible = "marvell,mvebu-gpio-3700",
> + pinctrl_nb: pinctrl-nb@13800 {
> + compatible = "marvell,armada3710-nb-pinctrl",
> "syscon", "simple-mfd";
> - reg = <0x13800 0x500>;
> + reg = <0x13800 0x100>, <0x13C00 0x20>;
> + gpionb: gpionb {
> + #gpio-cells = <2>;
> + gpio-ranges = <&pinctrl_nb 0 0 36>;
> + gpio-controller;
> + interrupts =
> + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> +
> + };
>
> xtalclk: xtal-clk {
> compatible = "marvell,armada-3700-xtal-clock";
> @@ -169,6 +188,23 @@
> };
> };
>
> + pinctrl_sb: pinctrl-sb@18800 {
> + compatible = "marvell,armada3710-sb-pinctrl",
> + "syscon", "simple-mfd";
> + reg = <0x18800 0x100>, <0x18C00 0x20>;
> + gpiosb: gpiosb {
> + #gpio-cells = <2>;
> + gpio-ranges = <&pinctrl_sb 0 0 29>;
> + gpio-controller;
> + interrupts =
> + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> eth0: ethernet@30000 {
> compatible = "marvell,armada-3700-neta";
> reg = <0x30000 0x4000>;
> --
> git-series 0.9.1
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* Re: [PATCH v4 2/7] arm64: marvell: enable the Armada 37xx pinctrl driver
From: Gregory CLEMENT @ 2017-04-26 10:26 UTC (permalink / raw)
To: Linus Walleij
Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA, Jason Cooper, Andrew Lunn,
Sebastian Hesselbarth, Thomas Petazzoni,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Nadav Haklai, Victor Gu,
Marcin Wojtas, Wilson Ding, Hua Jing, Neta Zur Hershkovits
In-Reply-To: <d5015ded3a76ae4b1d2d1ef43ab4cc2e51050a03.1491405475.git-series.gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Hi,
On mer., avril 05 2017, Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
> This commit makes sure the driver for the Armada 37xx pin controller is
> enabled.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Applied on mvebu/arm64
Thanks,
Gregory
> ---
> arch/arm64/Kconfig.platforms | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 129cc5ae4091..9aa71a3f3f50 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -103,8 +103,13 @@ config ARCH_MVEBU
> select ARMADA_AP806_SYSCON
> select ARMADA_CP110_SYSCON
> select ARMADA_37XX_CLK
> + select GPIOLIB
> + select GPIOLIB_IRQCHIP
> select MVEBU_ODMI
> select MVEBU_PIC
> + select OF_GPIO
> + select PINCTRL
> + select PINCTRL_ARMADA_37XX
> help
> This enables support for Marvell EBU familly, including:
> - Armada 3700 SoC Family
> --
> git-series 0.9.1
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v2 30/30] arm: dts: mt7623: add dts file for Bananapi R2 (BPI-R2) board
From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Add support for the Bananapi R2 (BPI-R2) development board from
Sinovoip. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch currently only adds Mediatek GMAC, MT7530 Switch, the crypto
engine, USB, IR, I2S, I2C, UART, SPI, PWM, GPIO keys, GPIO LEDs and
PMIC LEDs. As to the other missing hardware and peripherals, they would
be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 478 +++++++++++++++++++++
3 files changed, 481 insertions(+)
create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index 7f7c804..234c1dc 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -41,6 +41,8 @@ Supported boards:
- Reference board for MT7623N with NAND:
Required root node properties:
- compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623n";
+- Bananapi BPI-R2 board:
+ - compatible = "bananapi,bpi-r2", "mediatek,mt7623n";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5249d24..2831069 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1004,6 +1004,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt7623n-rfb-nand.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 0000000..a06bf0c
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,478 @@
+/*
+ * Copyright 2017 Sean Wang <sean.wang@mediatek.com>
+ *
+ * Sean Wang <sean.wang@mediatek.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623-mt6323.dtsi"
+
+/ {
+ model = "Bananapi BPI-R2";
+ compatible = "bananapi,bpi-r2", "mediatek,mt7623n";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a>;
+
+ red {
+ label = "bpi-r2:pio:red";
+ gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green {
+ label = "bpi-r2:pio:green";
+ gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue {
+ label = "bpi-r2:pio:blue";
+ gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory@80000000 {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+
+ sound:sound {
+ compatible = "mediatek,mt2701-wm8960-machine";
+ mediatek,platform = <&afe>;
+ audio-routing =
+ "Headphone", "HP_L",
+ "Headphone", "HP_R",
+ "LINPUT1", "AMIC",
+ "RINPUT1", "AMIC";
+ mediatek,audio-codec = <&wm8960>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins_a>;
+ };
+};
+
+&pio {
+ cir_pins_a:cir@0 {
+ pins_cir {
+ pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins_a: i2c@0 {
+ pins_i2c0 {
+ pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+ <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c@1 {
+ pin_i2c1 {
+ pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+ <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+ bias-disable;
+ };
+ };
+
+ i2s0_pins_a: i2s@0 {
+ pin_i2s0 {
+ pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+ <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+ <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+ <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+ <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ i2s1_pins_a: i2s@1 {
+ pin_i2s1 {
+ pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+ <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+ <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+ <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+ <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+ drive-strength = <MTK_DRIVE_12mA>;
+ bias-pull-down;
+ };
+ };
+
+ key_pins_a: keys@0 {
+ pins_keys {
+ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+ <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+ input-enable;
+ };
+ };
+
+ led_pins_a: leds@0 {
+ pins_leds {
+ pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+ <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+ <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+ };
+ };
+
+ mmc0_pins_default: mmc0default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_2mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins_rst {
+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1default {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1 {
+ pins_cmd_dat {
+ pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+ <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+ <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+ <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ spi0_pins_a: spi@0 {
+ pins_spi {
+ pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+ <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+ <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+ <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+ bias-disable;
+ };
+ };
+
+ pwm_pins_a: pwm@0 {
+ pins_pwm {
+ pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+ <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+ <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+ <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+ <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+ };
+ };
+
+ uart0_pins_a: uart@0 {
+ pins_dat {
+ pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+ <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins_a: uart@1 {
+ pins_dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cir_pins_a>;
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "trgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mdio: mdio-bus {
+ switch@0 {
+ compatible = "mediatek,mt7530";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ pinctrl-names = "default";
+ reset-gpios = <&pio 33 0>;
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&pwrap {
+ mt6323 {
+ mt6323led: led {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "bpi-r2:isink:green";
+ default-state = "off";
+ };
+ led@1 {
+ reg = <1>;
+ label = "bpi-r2:isink:red";
+ default-state = "off";
+ };
+ led@2 {
+ reg = <2>;
+ label = "bpi-r2:isink:blue";
+ default-state = "off";
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ wm8960: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins_a>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_a>;
+ status = "disabled";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
+&usb1 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
+
+&usb2 {
+ vusb33-supply = <&mt6323_vusb_reg>;
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related
* [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi
From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-gpio, Sean Wang, linux-kernel, linux-arm-kernel
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Banana Pi team in Sinovoip Co., Limited which are dedicated to
design and manufacture open hardware product.
Website: http://www.banana-pi.org/
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ec0bfb9..8ca0f3c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -44,6 +44,7 @@ avia avia semiconductor
avic Shanghai AVIC Optoelectronics Co., Ltd.
axentia Axentia Technologies AB
axis Axis Communications AB
+bananapi Banana Pi SINOVOP CO., LIMITED
boe BOE Technology Group Co., Ltd.
bosch Bosch Sensortec GmbH
boundary Boundary Devices Inc.
--
1.9.1
^ permalink raw reply related
* [PATCH v2 28/30] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-gpio, Sean Wang, linux-kernel, linux-arm-kernel
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: John Crispin <john@phrozen.org>
Enable the nand device and setup pinmux on the mt7632m rfb with nand
support.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 88 ++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index 07b3953..06a76fa 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -19,3 +19,91 @@
model = "MediaTek MT7623N NAND reference board";
compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623n";
};
+
+&pio {
+ nand_pins_default: nanddefault {
+ pins_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up;
+ };
+
+ pins_we {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_ale {
+ pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+};
+
+&nandc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins_default>;
+ nand@0 {
+ reg = <0>;
+ spare_per_sector = <64>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <12>;
+ nand-ecc-step-size = <1024>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preloader";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+
+ partition@C0000 {
+ label = "uboot-env";
+ reg = <0xC0000 0x40000>;
+ };
+
+ partition@140000 {
+ label = "bootimg";
+ reg = <0x140000 0x2000000>;
+ };
+
+ partition@2140000 {
+ label = "recovery";
+ reg = <0x2140000 0x2000000>;
+ };
+
+ partition@4140000 {
+ label = "rootfs";
+ reg = <0x4140000 0x1000000>;
+ };
+
+ partition@5140000 {
+ label = "usrdata";
+ reg = <0x5140000 0x1000000>;
+ };
+ };
+ };
+};
+
+&bch {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related
* [PATCH v2 27/30] arm: dts: mt7623: enable the usb device on the mt7623n rfb
From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: John Crispin <john@phrozen.org>
All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 4963e6a..2964b4c 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -28,6 +28,15 @@
serial1 = &uart1;
serial2 = &uart2;
};
+
+ usb_p1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&uart0 {
@@ -41,3 +50,12 @@
&uart2 {
status = "okay";
};
+
+&usb1 {
+ vbus-supply = <&usb_p1_vbus>;
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related
* [PATCH v2 26/30] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, john-Pj+rj9U5foFAfugRpC6u6w,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
This patch does a cleanup of the uart nodes in the dts file of the RFB. It
adds aliases, enables 2 more uarts and explicitly sets the uart mode of the
console.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623n-rfb.dtsi | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index c526116..4963e6a 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -16,12 +16,26 @@
/ {
chosen {
- stdout-path = &uart2;
+ stdout-path = "serial2:115200n8";
};
memory@80000000 {
reg = <0 0x80000000 0 0x40000000>;
};
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
};
&uart2 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v2 25/30] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, john-Pj+rj9U5foFAfugRpC6u6w,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
There are 2 versions of the SoC. MT7623N is almost identical to MT7623A
but has some additional multimedia features. The reference boards are
available as NAND or MMC and might have a different ethernet setup. In
order to reduce the duplication of devicetree code we add an intermediate
dtsi file for these reference boards. Additionally Mediatek pointed out,
that the EVB is yet another board and the board in question is infact the
RFB. Take this into account while renaming the files.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
Documentation/devicetree/bindings/arm/mediatek.txt | 6 ++--
arch/arm/boot/dts/Makefile | 2 +-
arch/arm/boot/dts/mt7623-evb.dts | 33 ----------------------
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 21 ++++++++++++++
arch/arm/boot/dts/mt7623n-rfb.dtsi | 29 +++++++++++++++++++
arch/arm/mach-mediatek/mediatek.c | 4 +--
arch/arm/mach-mediatek/platsmp.c | 2 +-
7 files changed, 57 insertions(+), 40 deletions(-)
delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts
create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts
create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index c860b24..7f7c804 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -12,7 +12,7 @@ compatible: Must contain one of
"mediatek,mt6592"
"mediatek,mt6755"
"mediatek,mt6795"
- "mediatek,mt7623"
+ "mediatek,mt7623n"
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
@@ -38,9 +38,9 @@ Supported boards:
- Evaluation board for MT6795(Helio X10):
Required root node properties:
- compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
-- Evaluation board for MT7623:
+- Reference board for MT7623N with NAND:
Required root node properties:
- - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+ - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623n";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..5249d24 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1003,7 +1003,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
- mt7623-evb.dtb \
+ mt7623n-rfb-nand.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
deleted file mode 100644
index a769149..0000000
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (c) 2016 MediaTek Inc.
- * Author: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt7623-mt6323.dtsi"
-
-/ {
- model = "MediaTek MT7623 evaluation board";
- compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
-
- chosen {
- stdout-path = &uart2;
- };
-
- memory {
- reg = <0 0x80000000 0 0x40000000>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
new file mode 100644
index 0000000..07b3953
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623n-rfb.dtsi"
+
+/ {
+ model = "MediaTek MT7623N NAND reference board";
+ compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623n";
+};
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
new file mode 100644
index 0000000..c526116
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt7623-mt6323.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory@80000000 {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index a6e3c98..602211d 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -29,7 +29,7 @@ static void __init mediatek_timer_init(void)
void __iomem *gpt_base;
if (of_machine_is_compatible("mediatek,mt6589") ||
- of_machine_is_compatible("mediatek,mt7623") ||
+ of_machine_is_compatible("mediatek,mt7623n") ||
of_machine_is_compatible("mediatek,mt8135") ||
of_machine_is_compatible("mediatek,mt8127")) {
/* turn on GPT6 which ungates arch timer clocks */
@@ -48,7 +48,7 @@ static void __init mediatek_timer_init(void)
"mediatek,mt2701",
"mediatek,mt6589",
"mediatek,mt6592",
- "mediatek,mt7623",
+ "mediatek,mt7623n",
"mediatek,mt8127",
"mediatek,mt8135",
NULL,
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index 726eb69..2dfa1cd 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -58,7 +58,7 @@ struct mtk_smp_boot_info {
static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
{ .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot },
- { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot },
+ { .compatible = "mediatek,mt7623n", .data = &mtk_mt7623_boot },
};
static void __iomem *mtk_smp_base;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v2 24/30] arm: dts: mt7623: add mt7623-mt6323.dtsi file
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, john-Pj+rj9U5foFAfugRpC6u6w,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA, Sean Wang,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
MediaTek produces various PMICs. Which one is used depends on the actual
circuit design. Instead of adding the correct PMIC node to every dts file
we instead add a new intermediate dtsi file which adds the PMIC node.
Additionally we also add the phandles for the regulators to various nodes.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623-evb.dts | 2 +-
arch/arm/boot/dts/mt7623-mt6323.dtsi | 269 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623.dtsi | 8 +-
3 files changed, 274 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
index b60b41c..a769149 100644
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ b/arch/arm/boot/dts/mt7623-evb.dts
@@ -13,7 +13,7 @@
*/
/dts-v1/;
-#include "mt7623.dtsi"
+#include "mt7623-mt6323.dtsi"
/ {
model = "MediaTek MT7623 evaluation board";
diff --git a/arch/arm/boot/dts/mt7623-mt6323.dtsi b/arch/arm/boot/dts/mt7623-mt6323.dtsi
new file mode 100644
index 0000000..93d3f71
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623-mt6323.dtsi
@@ -0,0 +1,269 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt7623.dtsi"
+
+&cpu0 {
+ proc-supply = <&mt6323_vproc_reg>;
+};
+
+&cpu1 {
+ proc-supply = <&mt6323_vproc_reg>;
+};
+
+&cpu2 {
+ proc-supply = <&mt6323_vproc_reg>;
+};
+
+&cpu3 {
+ proc-supply = <&mt6323_vproc_reg>;
+};
+
+&pwrap {
+ pmic: mt6323 {
+ compatible = "mediatek,mt6323";
+ interrupt-parent = <&pio>;
+ interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6323regulator: mt6323regulator{
+ compatible = "mediatek,mt6323-regulator";
+
+ mt6323_vproc_reg: buck_vproc{
+ regulator-name = "vproc";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vsys_reg: buck_vsys{
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vpa_reg: buck_vpa{
+ regulator-name = "vpa";
+ regulator-min-microvolt = < 500000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ mt6323_vtcxo_reg: ldo_vtcxo{
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcn28_reg: ldo_vcn28{
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_va_reg: ldo_va{
+ regulator-name = "va";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcama_reg: ldo_vcama{
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vio28_reg: ldo_vio28{
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vusb_reg: ldo_vusb{
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmc_reg: ldo_vmc{
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmch_reg: ldo_vmch{
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vemc3v3_reg: ldo_vemc3v3{
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vgp1_reg: ldo_vgp1{
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp2_reg: ldo_vgp2{
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp3_reg: ldo_vgp3{
+ regulator-name = "vgp3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcn18_reg: ldo_vcn18{
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim1_reg: ldo_vsim1{
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim2_reg: ldo_vsim2{
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vrtc_reg: ldo_vrtc{
+ regulator-name = "vrtc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamaf_reg: ldo_vcamaf{
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vibr_reg: ldo_vibr{
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ };
+
+ mt6323_vrf18_reg: ldo_vrf18{
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1825000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-enable-ramp-delay = <187>;
+ };
+
+ mt6323_vm_reg: ldo_vm{
+ regulator-name = "vm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vio18_reg: ldo_vio18{
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamd_reg: ldo_vcamd{
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcamio_reg: ldo_vcamio{
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&mt6323_vemc3v3_reg>;
+ vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
+&mmc1 {
+ vmmc-supply = <&mt6323_vmch_reg>;
+ vqmmc-supply = <&mt6323_vmc_reg>;
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d81158b2..e9e0974 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -32,22 +32,22 @@
#size-cells = <0>;
enable-method = "mediatek,mt6589-smp";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x1>;
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x3>;
--
1.9.1
^ permalink raw reply related
* [PATCH v2 23/30] arm: dts: mt7623: add Sean as one of authors for mt7623.dtsi files
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, john-Pj+rj9U5foFAfugRpC6u6w,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add Sean as one of the authors for the mt7623.dtsi
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d33d535..d81158b2 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -1,6 +1,7 @@
/*
- * Copyright (c) 2016 MediaTek Inc.
+ * Copyright (c) 2017 MediaTek Inc.
* Author: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
+ * Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v2 22/30] arm: dts: mt7623: add thermal nodes to the mt7623.dtsi file
From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-gpio, Sean Wang, linux-kernel, linux-arm-kernel
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Add thermal nodes to the mt7623.dtsi file.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 2289232..d33d535 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -354,6 +354,22 @@
status = "disabled";
};
+ thermal: thermal@1100b000 {
+ #thermal-sensor-cells = <1>;
+ compatible = "mediatek,mt7623-thermal",
+ "mediatek,mt2701-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
+ reset-names = "therm";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration_data>;
+ nvmem-cell-names = "calibration-data";
+ };
+
spi1: spi@11016000 {
compatible = "mediatek,mt7623-spi",
"mediatek,mt2701-spi";
--
1.9.1
^ permalink raw reply related
* [PATCH v2 21/30] arm: dts: mt7623: add efuse nodes to the mt7623.dtsi file
From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Add efuse nodes to the mt7623.dtsi file.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 0f82e1a..2289232 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -189,6 +189,17 @@
reg = <0 0x10200100 0 0x1c>;
};
+ efuse: efuse@10206000 {
+ compatible = "mediatek,mt7623-efuse",
+ "mediatek,mt8173-efuse";
+ reg = <0 0x10206000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ thermal_calibration_data: calib@424 {
+ reg = <0x424 0xc>;
+ };
+ };
+
apmixedsys: syscon@10209000 {
compatible = "mediatek,mt7623-apmixedsys",
"mediatek,mt2701-apmixedsys",
--
1.9.1
^ permalink raw reply related
* [PATCH v2 20/30] arm: dts: mt7623: add auxadc nodes to the mt7623.dtsi file
From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-gpio, Sean Wang, linux-kernel, linux-arm-kernel
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Add auxadc nodes to the mt7623.dtsi file.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 707f0e5..0f82e1a 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -215,6 +215,15 @@
<0 0x10216000 0 0x2000>;
};
+ auxadc: adc@11001000 {
+ compatible = "mediatek,mt7623-auxadc",
+ "mediatek,mt2701-auxadc";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&pericfg CLK_PERI_AUXADC>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ };
+
uart0: serial@11002000 {
compatible = "mediatek,mt7623-uart",
"mediatek,mt6577-uart";
--
1.9.1
^ permalink raw reply related
* [PATCH v2 19/30] arm: dts: mt7623: add rng nodes to the mt7623.dtsi file
From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Add rng nodes to the mt7623.dtsi file.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a2b6238..707f0e5 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -197,6 +197,13 @@
#clock-cells = <1>;
};
+ rng: rng@1020f000 {
+ compatible = "mediatek,mt7623-rng";
+ reg = <0 0x1020f000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_TRNG>;
+ clock-names = "rng";
+ };
+
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
--
1.9.1
^ permalink raw reply related
* [PATCH v2 18/30] arm: dts: mt7623: add afe nodes to the mt7623.dtsi file
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, john-Pj+rj9U5foFAfugRpC6u6w,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add afe nodes to the mt7623.dtsi file. Which
is the necessary node for I2S audio in/out.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623.dtsi | 99 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 99 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 76e0840..a2b6238 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -380,6 +380,105 @@
status = "disabled";
};
+ afe: audio-controller@11220000 {
+ compatible = "mediatek,mt7623-audio",
+ "mediatek,mt2701-audio";
+ reg = <0 0x11220000 0 0x2000>,
+ <0 0x112a0000 0 0x20000>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+ clocks = <&infracfg CLK_INFRA_AUDIO>,
+ <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+ <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+ <&topckgen CLK_TOP_AUD_MUX2_DIV>,
+ <&topckgen CLK_TOP_AUD_48K_TIMING>,
+ <&topckgen CLK_TOP_AUD_44K_TIMING>,
+ <&topckgen CLK_TOP_AUDPLL_MUX_SEL>,
+ <&topckgen CLK_TOP_APLL_SEL>,
+ <&topckgen CLK_TOP_AUD1PLL_98M>,
+ <&topckgen CLK_TOP_AUD2PLL_90M>,
+ <&topckgen CLK_TOP_HADDS2PLL_98M>,
+ <&topckgen CLK_TOP_HADDS2PLL_294M>,
+ <&topckgen CLK_TOP_AUDPLL>,
+ <&topckgen CLK_TOP_AUDPLL_D4>,
+ <&topckgen CLK_TOP_AUDPLL_D8>,
+ <&topckgen CLK_TOP_AUDPLL_D16>,
+ <&topckgen CLK_TOP_AUDPLL_D24>,
+ <&topckgen CLK_TOP_AUDINTBUS_SEL>,
+ <&clk26m>,
+ <&topckgen CLK_TOP_SYSPLL1_D4>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K5_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K6_SRC_SEL>,
+ <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K5_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_K6_SRC_DIV>,
+ <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S5_MCLK>,
+ <&topckgen CLK_TOP_AUD_I2S6_MCLK>,
+ <&topckgen CLK_TOP_ASM_M_SEL>,
+ <&topckgen CLK_TOP_ASM_H_SEL>,
+ <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_UNIVPLL2_D2>,
+ <&topckgen CLK_TOP_SYSPLL_D5>;
+
+ clock-names = "infra_sys_audio_clk",
+ "top_audio_mux1_sel",
+ "top_audio_mux2_sel",
+ "top_audio_mux1_div",
+ "top_audio_mux2_div",
+ "top_audio_48k_timing",
+ "top_audio_44k_timing",
+ "top_audpll_mux_sel",
+ "top_apll_sel",
+ "top_aud1_pll_98M",
+ "top_aud2_pll_90M",
+ "top_hadds2_pll_98M",
+ "top_hadds2_pll_294M",
+ "top_audpll",
+ "top_audpll_d4",
+ "top_audpll_d8",
+ "top_audpll_d16",
+ "top_audpll_d24",
+ "top_audintbus_sel",
+ "clk_26m",
+ "top_syspll1_d4",
+ "top_aud_k1_src_sel",
+ "top_aud_k2_src_sel",
+ "top_aud_k3_src_sel",
+ "top_aud_k4_src_sel",
+ "top_aud_k5_src_sel",
+ "top_aud_k6_src_sel",
+ "top_aud_k1_src_div",
+ "top_aud_k2_src_div",
+ "top_aud_k3_src_div",
+ "top_aud_k4_src_div",
+ "top_aud_k5_src_div",
+ "top_aud_k6_src_div",
+ "top_aud_i2s1_mclk",
+ "top_aud_i2s2_mclk",
+ "top_aud_i2s3_mclk",
+ "top_aud_i2s4_mclk",
+ "top_aud_i2s5_mclk",
+ "top_aud_i2s6_mclk",
+ "top_asm_m_sel",
+ "top_asm_h_sel",
+ "top_univpll2_d4",
+ "top_univpll2_d2",
+ "top_syspll_d5";
+ };
+
mmc0: mmc@11230000 {
compatible = "mediatek,mt7623-mmc",
"mediatek,mt8135-mmc";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v2 17/30] arm: dts: mt7623: add ir nodes to the mt7623.dtsi file
From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Add ir nodes to the mt7623.dtsi file.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index ad7c50a..76e0840 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -171,6 +171,15 @@
clock-names = "spi", "wrap";
};
+ cir: cir@0x10013000 {
+ compatible = "mediatek,mt7623-cir";
+ reg = <0 0x10013000 0 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_IRRX>;
+ clock-names = "clk";
+ status = "disabled";
+ };
+
sysirq: interrupt-controller@10200100 {
compatible = "mediatek,mt7623-sysirq",
"mediatek,mt6577-sysirq";
--
1.9.1
^ permalink raw reply related
* [PATCH v2 16/30] arm: dts: mt7623: add crypto engine nodes to the mt7623.dtsi file
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-04-26 9:26 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, john-Pj+rj9U5foFAfugRpC6u6w,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA, Sean Wang,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add crypto engine nodes to the mt7623.dtsi file.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index c4be7a5..ad7c50a 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -505,4 +505,19 @@
#size-cells = <0>;
status = "disabled";
};
+
+ crypto: crypto@1b240000 {
+ compatible = "mediatek,mt7623-crypto";
+ reg = <0 0x1b240000 0 0x20000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+ <ðsys CLK_ETHSYS_CRYPTO>;
+ clock-names = "ethif","cryp";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+ status = "disabled";
+ };
};
--
1.9.1
^ permalink raw reply related
* [PATCH v2 15/30] arm: dts: mt7623: add ethernet nodes to the mt7623.dtsi file
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-04-26 9:25 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, john-Pj+rj9U5foFAfugRpC6u6w,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-gpio-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Sean Wang
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add ethernet nodes to the mt7623.dtsi file.
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index cfafaea..c4be7a5 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -485,4 +485,24 @@
reg = <0 0x1b000000 0 0x1000>;
#clock-cells = <1>;
};
+
+ eth: ethernet@1b100000 {
+ compatible = "mediatek,mt2701-eth", "syscon";
+ reg = <0 0x1b100000 0 0x20000>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+ <ðsys CLK_ETHSYS_ESW>,
+ <ðsys CLK_ETHSYS_GP1>,
+ <ðsys CLK_ETHSYS_GP2>,
+ <&apmixedsys CLK_APMIXED_TRGPLL>;
+ clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+ mediatek,ethsys = <ðsys>;
+ mediatek,pctl = <&syscfg_pctl_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related
* [PATCH v2 14/30] arm: dts: mt7623: add pwm nodes to the mt7623.dtsi file
From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-gpio, Sean Wang, linux-kernel, linux-arm-kernel
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: Sean Wang <sean.wang@mediatek.com>
Add PWM nodes to the mt7623.dtsi file.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 56da5ba..cfafaea 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -243,6 +243,22 @@
status = "disabled";
};
+ pwm: pwm@11006000 {
+ compatible = "mediatek,mt7623-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&pericfg CLK_PERI_PWM>,
+ <&pericfg CLK_PERI_PWM1>,
+ <&pericfg CLK_PERI_PWM2>,
+ <&pericfg CLK_PERI_PWM3>,
+ <&pericfg CLK_PERI_PWM4>,
+ <&pericfg CLK_PERI_PWM5>;
+ clock-names = "top", "main", "pwm1", "pwm2",
+ "pwm3", "pwm4", "pwm5";
+ status = "disabled";
+ };
+
i2c0: i2c@11007000 {
compatible = "mediatek,mt7623-i2c",
"mediatek,mt6577-i2c";
--
1.9.1
^ permalink raw reply related
* [PATCH v2 13/30] arm: dts: mt7623: add usb nodes to the mt7623.dtsi file
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-04-26 9:25 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, john-Pj+rj9U5foFAfugRpC6u6w,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA, Sean Wang,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Add USB nodes to the mt7623.dtsi file.
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623.dtsi | 77 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 1ea9b18..56da5ba 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -377,12 +377,89 @@
status = "disabled";
};
+ usb1: usb@1a1c0000 {
+ compatible = "mediatek,mt7623-xhci",
+ "mediatek,mt8173-xhci";
+ reg = <0 0x1a1c0000 0 0x1000>,
+ <0 0x1a1c4700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+ <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "free_ck";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ u3phy1: usb-phy@1a1c4000 {
+ compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ reg = <0 0x1a1c4000 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy@1a1c4800 {
+ reg = <0 0x1a1c4800 0 0x0100>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port0: usb-phy@1a1c4900 {
+ reg = <0 0x1a1c4900 0 0x0700>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ usb2: usb@1a240000 {
+ compatible = "mediatek,mt7623-xhci",
+ "mediatek,mt8173-xhci";
+ reg = <0 0x1a240000 0 0x1000>,
+ <0 0x1a244700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+ <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "free_ck";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ u3phy2: usb-phy@1a244000 {
+ compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ reg = <0 0x1a244000 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port1: usb-phy@1a244800 {
+ reg = <0 0x1a244800 0 0x0100>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port1: usb-phy@1a244900 {
+ reg = <0 0x1a244900 0 0x0700>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
"syscon";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
ethsys: syscon@1b000000 {
--
1.9.1
^ permalink raw reply related
* [PATCH v2 12/30] arm: dts: mt7623: add mmc nodes to the mt7623.dtsi file
From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-gpio, Sean Wang, linux-kernel, linux-arm-kernel
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: John Crispin <john@phrozen.org>
Add e/MMC nodes to the mt7623.dtsi file.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index f15d65a..1ea9b18 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -355,6 +355,28 @@
status = "disabled";
};
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt7623-mmc",
+ "mediatek,mt8135-mmc";
+ reg = <0 0x11230000 0 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_0>,
+ <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt7623-mmc",
+ "mediatek,mt8135-mmc";
+ reg = <0 0x11240000 0 0x1000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_1>,
+ <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ clock-names = "source", "hclk";
+ status = "disabled";
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
--
1.9.1
^ permalink raw reply related
* [PATCH v2 11/30] arm: dts: mt7623: add nand nodes to the mt7623.dtsi file
From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-gpio, Sean Wang, linux-kernel, linux-arm-kernel
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: John Crispin <john@phrozen.org>
Add NAND/EEC nodes to the mt7623.dtsi file.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 131808c..f15d65a 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -330,6 +330,31 @@
status = "disabled";
};
+ nandc: nfi@1100d000 {
+ compatible = "mediatek,mt7623-nfc",
+ "mediatek,mt2701-nfc";
+ reg = <0 0x1100d000 0 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+ clocks = <&pericfg CLK_PERI_NFI>,
+ <&pericfg CLK_PERI_NFI_PAD>;
+ clock-names = "nfi_clk", "pad_clk";
+ status = "disabled";
+ ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ bch: ecc@1100e000 {
+ compatible = "mediatek,mt7623-ecc",
+ "mediatek,mt2701-ecc";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_ECC>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
--
1.9.1
^ permalink raw reply related
* [PATCH v2 10/30] arm: dts: mt7623: add spi nodes to the mt7623.dtsi file
From: sean.wang-NuS5LvNUpcJWk0Htik3J/w @ 2017-04-26 9:25 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, john-Pj+rj9U5foFAfugRpC6u6w,
mark.rutland-5wv7dgnIgG8, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA, Sean Wang,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add spi controller nodes to the mt7623.dtsi file
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Signed-off-by: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm/boot/dts/mt7623.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index adb4793..131808c 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -288,6 +288,48 @@
status = "disabled";
};
+ spi0: spi@1100a000 {
+ compatible = "mediatek,mt7623-spi",
+ "mediatek,mt2701-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI0_SEL>,
+ <&pericfg CLK_PERI_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi1: spi@11016000 {
+ compatible = "mediatek,mt7623-spi",
+ "mediatek,mt2701-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11016000 0 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI1_SEL>,
+ <&pericfg CLK_PERI_SPI1>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi2: spi@11017000 {
+ compatible = "mediatek,mt7623-spi",
+ "mediatek,mt2701-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11017000 0 0x1000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI2_SEL>,
+ <&pericfg CLK_PERI_SPI2>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
--
1.9.1
^ permalink raw reply related
* [PATCH v2 09/30] arm: dts: mt7623: add i2c nodes to the mt7623.dtsi file
From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw)
To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij,
devicetree, linux-mediatek
Cc: linux-gpio, Sean Wang, linux-kernel, linux-arm-kernel
In-Reply-To: <1493198774-4478-1-git-send-email-sean.wang@mediatek.com>
From: John Crispin <john@phrozen.org>
Add I2C nodes to the mt7623.dtsi file.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 45 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 6adc21d..adb4793 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -243,6 +243,51 @@
status = "disabled";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt7623-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11007000 0 0x70>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt7623-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11008000 0 0x70>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt7623-i2c",
+ "mediatek,mt6577-i2c";
+ reg = <0 0x11009000 0 0x70>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
--
1.9.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox